Skip to contentSkip to conversation

KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()

PATCH Applied Ben Gardon 3 participants 3 messages Nov 2, 2022 – Nov 3, 2022

Subsystems (3)
lore
Share & tools
lore

Ben Gardon

author
#0 lore raw

PATCH v2 1/1 KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()

kvm_zap_gfn_range() must be called in an SRCU read-critical section, but there is no SRCU annotation in __kvm_set_or_clear_apicv_inhibit(). This can lead to the following warning via kvm_arch_vcpu_ioctl_set_guest_debug() if a Shadow MMU is in use (TDP MMU disabled or nesting):

[ 1416.659809] =============================
[ 1416.659810] WARNING: suspicious RCU usage
[ 1416.659839] 6.1.0-dbg-DEV #1 Tainted: G S        I
[ 1416.659853] -----------------------------
[ 1416.659854] include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage!
[ 1416.659856]
...
[ 1416.659904]  dump_stack_lvl+0x84/0xaa
[ 1416.659910]  dump_stack+0x10/0x15
[ 1416.659913]  lockdep_rcu_suspicious+0x11e/0x130
[ 1416.659919]  kvm_zap_gfn_range+0x226/0x5e0
[ 1416.659926]  ? kvm_make_all_cpus_request_except+0x18b/0x1e0
[ 1416.659935]  __kvm_set_or_clear_apicv_inhibit+0xcc/0x100
[ 1416.659940]  kvm_arch_vcpu_ioctl_set_guest_debug+0x350/0x390
[ 1416.659946]  kvm_vcpu_ioctl+0x2fc/0x620
[ 1416.659955]  __se_sys_ioctl+0x77/0xc0
[ 1416.659962]  __x64_sys_ioctl+0x1d/0x20
[ 1416.659965]  do_syscall_64+0x3d/0x80
[ 1416.659969]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Always take the KVM SRCU read lock in __kvm_set_or_clear_apicv_inhibit() to protect the GFN to memslot translation. The SRCU read lock is not technically required when no Shadow MMUs are in use, since the TDP MMU walks the paging structures from the roots and does not need to look up GFN translations in the memslots, but make the SRCU locking unconditional for simplicty.

In most cases, the SRCU locking is taken care of in the vCPU run loop, but when called through the KVM_SET_GUEST_DEBUG IOCTL, the SRCU read lock is missing.

Tested: ran tools/testing/selftests/kvm/x86_64/debug_regs on a DBG
build. This patch causes the suspicious RCU warning to disappear. Note that the warning is hit in __kvm_zap_rmaps(), so kvm_memslots_have_rmaps() must return true in order for this to repro (i.e. the TDP MMU must be off or nesting in use.)

Fixes 36222b117e36 ("KVM: x86: don't disable APICv memslot when inhibited")
---
 arch/x86/kvm/x86.c | 3 +++
 1 file changed, 3 insertions(+)
arch/x86/kvm/x86.c +3 -0
index cd9eb13e2ed7..6d853e5f683d 100644
@@ -10091,7 +10091,10 @@ void __kvm_set_or_clear_apicv_inhibit(struct kvm *kvm,
 		kvm->arch.apicv_inhibit_reasons = new;
 		if (new) {
 			unsigned long gfn = gpa_to_gfn(APIC_DEFAULT_PHYS_BASE);
+			int idx = srcu_read_lock(&kvm->srcu);
+
 			kvm_zap_gfn_range(kvm, gfn, gfn+1);
+			srcu_read_unlock(&kvm->srcu, idx);
 		}
 	} else {
 		kvm->arch.apicv_inhibit_reasons = new;
Signature · 1 line
2.38.1.431.g37b22c650d-goog
maintainer Reviewed-by on v2 1/1
#1 lore raw
Quoted 33 lines · Ben Gardon

kvm_zap_gfn_range() must be called in an SRCU read-critical section, but there is no SRCU annotation in __kvm_set_or_clear_apicv_inhibit(). This can lead to the following warning via kvm_arch_vcpu_ioctl_set_guest_debug() if a Shadow MMU is in use (TDP MMU disabled or nesting):

[ 1416.659809] =============================
[ 1416.659810] WARNING: suspicious RCU usage
[ 1416.659839] 6.1.0-dbg-DEV #1 Tainted: G S        I
[ 1416.659853] -----------------------------
[ 1416.659854] include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage!
[ 1416.659856]
...
[ 1416.659904]  dump_stack_lvl+0x84/0xaa
[ 1416.659910]  dump_stack+0x10/0x15
[ 1416.659913]  lockdep_rcu_suspicious+0x11e/0x130
[ 1416.659919]  kvm_zap_gfn_range+0x226/0x5e0
[ 1416.659926]  ? kvm_make_all_cpus_request_except+0x18b/0x1e0
[ 1416.659935]  __kvm_set_or_clear_apicv_inhibit+0xcc/0x100
[ 1416.659940]  kvm_arch_vcpu_ioctl_set_guest_debug+0x350/0x390
[ 1416.659946]  kvm_vcpu_ioctl+0x2fc/0x620
[ 1416.659955]  __se_sys_ioctl+0x77/0xc0
[ 1416.659962]  __x64_sys_ioctl+0x1d/0x20
[ 1416.659965]  do_syscall_64+0x3d/0x80
[ 1416.659969]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Always take the KVM SRCU read lock in __kvm_set_or_clear_apicv_inhibit() to protect the GFN to memslot translation. The SRCU read lock is not technically required when no Shadow MMUs are in use, since the TDP MMU walks the paging structures from the roots and does not need to look up GFN translations in the memslots, but make the SRCU locking unconditional for simplicty.

Quoted 3 lines

In most cases, the SRCU locking is taken care of in the vCPU run loop, but when called through the KVM_SET_GUEST_DEBUG IOCTL, the SRCU read lock is missing.

Nit, it not just KVM_SET_GUEST_DEBUG. If it were just KVM_SET_GUEST_DEBUG, I might have advocated putting the fix KVM_SET_GUEST_DEBUG.

Quoted 10 lines

Tested: ran tools/testing/selftests/kvm/x86_64/debug_regs on a DBG
build. This patch causes the suspicious RCU warning to disappear. Note that the warning is hit in __kvm_zap_rmaps(), so kvm_memslots_have_rmaps() must return true in order for this to repro (i.e. the TDP MMU must be off or nesting in use.)

Fixes 36222b117e36 ("KVM: x86: don't disable APICv memslot when inhibited")

---