Skip to contentSkip to conversation

ASoC: wm5102: Revert "ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe"

PATCH In review Sasha Levin 2 participants 13 messages Nov 6, 2022

Subsystems (5)
lore
Share & tools
lore
author maintainer
#10 lore raw

PATCH 10/12 selftests/futex: fix build for clang

In reply to Sasha Levin

From: Ricardo Cañuelo <[email protected]>

[ Upstream commit 03cab65a07e083b6c1010fbc8f9b817e9aca75d9 ]

Don't use the test-specific header files as source files to force a target dependency, as clang will complain if more than one source file is used for a compile command with a single '-o' flag.

Use the proper Makefile variables instead as defined in tools/testing/selftests/lib.mk.

---
 tools/testing/selftests/futex/functional/Makefile | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
tools/testing/selftests/futex/functional/Makefile +2 -4
index 30996306cabc..479531f5865d 100644
@@ -3,11 +3,11 @@ INCLUDES := -I../include -I../../
 CFLAGS := $(CFLAGS) -g -O2 -Wall -D_GNU_SOURCE -pthread $(INCLUDES)
 LDFLAGS := $(LDFLAGS) -pthread -lrt
 
-HEADERS := \
+LOCAL_HDRS := \
 	../include/futextest.h \
 	../include/atomic.h \
 	../include/logging.h
-TEST_GEN_FILES := \
+TEST_GEN_PROGS := \
 	futex_wait_timeout \
 	futex_wait_wouldblock \
 	futex_requeue_pi \
@@ -21,5 +21,3 @@ TEST_PROGS := run.sh
 top_srcdir = ../../../../..
 KSFT_KHDR_INSTALL := 1
 include ../../lib.mk
-
-$(TEST_GEN_FILES): $(HEADERS)
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 5/12 spi: intel: Fix the offset to get the 64K erase opcode

In reply to Sasha Levin

From: Mauro Lima <[email protected]>

[ Upstream commit 6a43cd02ddbc597dc9a1f82c1e433f871a2f6f06 ]

According to documentation, the 64K erase opcode is located in VSCC range [16:23] instead of [8:15].
Use the proper value to shift the mask over the correct range.

---
 drivers/mtd/spi-nor/intel-spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mtd/spi-nor/intel-spi.c +1 -1
index 43e55a2e9b27..21b98c82e196 100644
@@ -113,7 +113,7 @@
 #define ERASE_OPCODE_SHIFT		8
 #define ERASE_OPCODE_MASK		(0xff << ERASE_OPCODE_SHIFT)
 #define ERASE_64K_OPCODE_SHIFT		16
-#define ERASE_64K_OPCODE_MASK		(0xff << ERASE_OPCODE_SHIFT)
+#define ERASE_64K_OPCODE_MASK		(0xff << ERASE_64K_OPCODE_SHIFT)
 
 #define INTEL_SPI_TIMEOUT		5000 /* ms */
 #define INTEL_SPI_FIFO_SZ		64
Signature · 6 lines
2.35.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/12 ASoC: wm5102: Revert "ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe"

From: Zhang Qilong <[email protected]>

[ Upstream commit de71d7567e358effd06dfc3e2a154b25f1331c10 ]

This reverts commit fcbb60820cd3008bb44334a0395e5e57ccb77329.

The pm_runtime_disable is redundant when error returns in wm5102_probe, we just revert the old patch to fix it.

---
 sound/soc/codecs/wm5102.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
sound/soc/codecs/wm5102.c +3 -3
index c5667b149c70..d6d4b4121369 100644
@@ -2084,6 +2084,9 @@ static int wm5102_probe(struct platform_device *pdev)
 		regmap_update_bits(arizona->regmap, wm5102_digital_vu[i],
 				   WM5102_DIG_VU, WM5102_DIG_VU);
 
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_idle(&pdev->dev);
+
 	ret = arizona_request_irq(arizona, ARIZONA_IRQ_DSP_IRQ1,
 				  "ADSP2 Compressed IRQ", wm5102_adsp2_irq,
 				  wm5102);
@@ -2116,9 +2119,6 @@ static int wm5102_probe(struct platform_device *pdev)
 		goto err_spk_irqs;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_idle(&pdev->dev);
-
 	return ret;
 
 err_spk_irqs:
Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH 2/12 ASoC: wm5110: Revert "ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe"

From: Zhang Qilong <[email protected]>

[ Upstream commit 7d4e966f4cd73ff69bf06934e8e14a33fb7ef447 ]

This reverts commit 86b46bf1feb83898d89a2b4a8d08d21e9ea277a7.

The pm_runtime_disable is redundant when error returns in wm5110_probe, we just revert the old patch to fix it.

---
 sound/soc/codecs/wm5110.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
sound/soc/codecs/wm5110.c +3 -3
index bbe9fdfb423c..06ec3f48c808 100644
@@ -2452,6 +2452,9 @@ static int wm5110_probe(struct platform_device *pdev)
 		regmap_update_bits(arizona->regmap, wm5110_digital_vu[i],
 				   WM5110_DIG_VU, WM5110_DIG_VU);
 
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_idle(&pdev->dev);
+
 	ret = arizona_request_irq(arizona, ARIZONA_IRQ_DSP_IRQ1,
 				  "ADSP2 Compressed IRQ", wm5110_adsp2_irq,
 				  wm5110);
@@ -2484,9 +2487,6 @@ static int wm5110_probe(struct platform_device *pdev)
 		goto err_spk_irqs;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_idle(&pdev->dev);
-
 	return ret;
 
 err_spk_irqs:
Signature · 1 line
2.35.1
author maintainer
#7 lore raw

PATCH 8/12 ASoC: codecs: jz4725b: use right control for Capture Volume

In reply to Sasha Levin

From: Siarhei Volkau <[email protected]>

[ Upstream commit 1538e2c8c9b7e7a656effcc6e4e7cfe8c1b405fd ]

Line In Bypass control is used as Master Capture at the moment this is completely incorrect.

Current control routed to Mixer instead of ADC, thus can't affect Capture path. ADC control shall be used instead.

ADC volume control parameters are different, so the patch fixes that as well. Manual says (16.6.3.2 Programmable input attenuation amplifier:
PGATM) that gain varies in range 0dB..22.5dB with 1.5dB step.

---
 sound/soc/codecs/jz4725b.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
sound/soc/codecs/jz4725b.c +9 -6
index 1f7a234266b9..1960516ac65e 100644
@@ -136,13 +136,16 @@ enum {
 #define REG_CGR3_GO1L_OFFSET		0
 #define REG_CGR3_GO1L_MASK		(0x1f << REG_CGR3_GO1L_OFFSET)
 
+#define REG_CGR10_GIL_OFFSET		0
+#define REG_CGR10_GIR_OFFSET		4
+
 struct jz_icdc {
 	struct regmap *regmap;
 	void __iomem *base;
 	struct clk *clk;
 };
 
-static const SNDRV_CTL_TLVD_DECLARE_DB_LINEAR(jz4725b_line_tlv, -1500, 600);
+static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(jz4725b_adc_tlv,     0, 150, 0);
 static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(jz4725b_dac_tlv, -2250, 150, 0);
 
 static const struct snd_kcontrol_new jz4725b_codec_controls[] = {
@@ -151,11 +154,11 @@ static const struct snd_kcontrol_new jz4725b_codec_controls[] = {
 		       REG_CGR1_GODL_OFFSET,
 		       REG_CGR1_GODR_OFFSET,
 		       0xf, 1, jz4725b_dac_tlv),
-	SOC_DOUBLE_R_TLV("Master Capture Volume",
-			 JZ4725B_CODEC_REG_CGR3,
-			 JZ4725B_CODEC_REG_CGR2,
-			 REG_CGR2_GO1R_OFFSET,
-			 0x1f, 1, jz4725b_line_tlv),
+	SOC_DOUBLE_TLV("Master Capture Volume",
+		       JZ4725B_CODEC_REG_CGR10,
+		       REG_CGR10_GIL_OFFSET,
+		       REG_CGR10_GIR_OFFSET,
+		       0xf, 0, jz4725b_adc_tlv),
 
 	SOC_SINGLE("Master Playback Switch", JZ4725B_CODEC_REG_CR1,
 		   REG_CR1_DAC_MUTE_OFFSET, 1, 1),
Signature · 1 line
2.35.1
author maintainer
#8 lore raw

PATCH 9/12 ASoC: codecs: jz4725b: fix capture selector naming

In reply to Sasha Levin

From: Siarhei Volkau <[email protected]>

[ Upstream commit 80852f8268769715db335a22305e81a0c4a38a84 ]

At the moment Capture source selector appears on Playback tab in the alsamixer and has a senseless name.

Let's fix that.

---
 sound/soc/codecs/jz4725b.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
sound/soc/codecs/jz4725b.c +7 -7
index 1960516ac65e..ebe643e4aa2f 100644
@@ -183,7 +183,7 @@ static SOC_VALUE_ENUM_SINGLE_DECL(jz4725b_codec_adc_src_enum,
 				  jz4725b_codec_adc_src_texts,
 				  jz4725b_codec_adc_src_values);
 static const struct snd_kcontrol_new jz4725b_codec_adc_src_ctrl =
-			SOC_DAPM_ENUM("Route", jz4725b_codec_adc_src_enum);
+	SOC_DAPM_ENUM("ADC Source Capture Route", jz4725b_codec_adc_src_enum);
 
 static const struct snd_kcontrol_new jz4725b_codec_mixer_controls[] = {
 	SOC_DAPM_SINGLE("Line In Bypass", JZ4725B_CODEC_REG_CR1,
@@ -228,7 +228,7 @@ static const struct snd_soc_dapm_widget jz4725b_codec_dapm_widgets[] = {
 	SND_SOC_DAPM_ADC("ADC", "Capture",
 			 JZ4725B_CODEC_REG_PMR1, REG_PMR1_SB_ADC_OFFSET, 1),
 
-	SND_SOC_DAPM_MUX("ADC Source", SND_SOC_NOPM, 0, 0,
+	SND_SOC_DAPM_MUX("ADC Source Capture Route", SND_SOC_NOPM, 0, 0,
 			 &jz4725b_codec_adc_src_ctrl),
 
 	/* Mixer */
@@ -287,11 +287,11 @@ static const struct snd_soc_dapm_route jz4725b_codec_dapm_routes[] = {
 	{"Mixer", NULL, "DAC to Mixer"},
 
 	{"Mixer to ADC", NULL, "Mixer"},
-	{"ADC Source", "Mixer", "Mixer to ADC"},
-	{"ADC Source", "Line In", "Line In"},
-	{"ADC Source", "Mic 1", "Mic 1"},
-	{"ADC Source", "Mic 2", "Mic 2"},
-	{"ADC", NULL, "ADC Source"},
+	{"ADC Source Capture Route", "Mixer", "Mixer to ADC"},
+	{"ADC Sourc Capture Routee", "Line In", "Line In"},
+	{"ADC Source Capture Route", "Mic 1", "Mic 1"},
+	{"ADC Source Capture Route", "Mic 2", "Mic 2"},
+	{"ADC", NULL, "ADC Source Capture Route"},
 
 	{"Out Stage", NULL, "Mixer"},
 	{"HP Out", NULL, "Out Stage"},
Signature · 1 line
2.35.1
author maintainer
#11 lore raw

PATCH 11/12 selftests/intel_pstate: fix build for ARCH=x86_64

In reply to Sasha Levin

From: Ricardo Cañuelo <[email protected]>

[ Upstream commit beb7d862ed4ac6aa14625418970f22a7d55b8615 ]

Handle the scenario where the build is launched with the ARCH envvar defined as x86_64.

---
 tools/testing/selftests/intel_pstate/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
tools/testing/selftests/intel_pstate/Makefile +3 -3
index 7340fd6a9a9f..9fc1a40b0127 100644
@@ -2,10 +2,10 @@
 CFLAGS := $(CFLAGS) -Wall -D_GNU_SOURCE
 LDLIBS := $(LDLIBS) -lm
 
-uname_M := $(shell uname -m 2>/dev/null || echo not)
-ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
+ARCH ?= $(shell uname -m 2>/dev/null || echo not)
+ARCH_PROCESSED := $(shell echo $(ARCH) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
 
-ifeq (x86,$(ARCH))
+ifeq (x86,$(ARCH_PROCESSED))
 TEST_GEN_FILES := msr aperf
 endif
 
Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 7/12 ASoC: codecs: jz4725b: fix reported volume for Master ctl

In reply to Sasha Levin

From: Siarhei Volkau <[email protected]>

[ Upstream commit 088777bf65b98cfa4b5378119d0a7d49a58ece44 ]

DAC volume control is the Master Playback Volume at the moment and it reports wrong levels in alsamixer and other alsa apps.

The patch fixes that, as stated in manual on the jz4725b SoC (16.6.3.4 Programmable attenuation: GOD) the ctl range varies from -22.5dB to 0dB with 1.5dB step.

---
 sound/soc/codecs/jz4725b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/jz4725b.c +1 -1
index a04b8d5d1ded..1f7a234266b9 100644
@@ -142,8 +142,8 @@ struct jz_icdc {
 	struct clk *clk;
 };
 
-static const SNDRV_CTL_TLVD_DECLARE_DB_LINEAR(jz4725b_dac_tlv, -2250, 0);
 static const SNDRV_CTL_TLVD_DECLARE_DB_LINEAR(jz4725b_line_tlv, -1500, 600);
+static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(jz4725b_dac_tlv, -2250, 150, 0);
 
 static const struct snd_kcontrol_new jz4725b_codec_controls[] = {
 	SOC_DOUBLE_TLV("Master Playback Volume",
Signature · 1 line
2.35.1
author maintainer
#12 lore raw

PATCH 12/12 rtc: cmos: fix build on non-ACPI platforms

In reply to Sasha Levin

From: Alexandre Belloni <[email protected]>

[ Upstream commit db4e955ae333567dea02822624106c0b96a2f84f ]

Now that rtc_wake_setup is called outside of cmos_wake_setup, it also need to be defined on non-ACPI platforms.

---
 drivers/rtc/rtc-cmos.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/rtc/rtc-cmos.c +3 -0
index c0dc03ffa817..be92919af2f3 100644
@@ -1290,6 +1290,9 @@ static void cmos_check_acpi_rtc_status(struct device *dev,
 {
 }
 
+static void rtc_wake_setup(struct device *dev)
+{
+}
 #endif
 
 #ifdef	CONFIG_PNP
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/12 ASoC: wm8962: Add an event handler for TEMP_HP and TEMP_SPK

In reply to Sasha Levin

From: Xiaolei Wang <[email protected]>

[ Upstream commit ee1aa2ae3eaa96e70229fa61deee87ef4528ffdf ]

In wm8962 driver, the WM8962_ADDITIONAL_CONTROL_4 is used as a volatile register, but this register mixes a bunch of volatile status bits and a bunch of non-volatile control bits. The dapm widgets TEMP_HP and TEMP_SPK leverages the control bits in this register. After the wm8962 probe, the regmap will bet set to cache only mode, then a read error like below would be triggered when trying to read the initial power state of the dapm widgets TEMP_HP and TEMP_SPK.
wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16

In order to fix this issue, we add event handler to actually power up/down these widgets. With this change, we also need to explicitly power off these widgets in the wm8962 probe since they are enabled by default.

---
 sound/soc/codecs/wm8962.c | 54 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 52 insertions(+), 2 deletions(-)
sound/soc/codecs/wm8962.c +52 -2
index ebaee468057b..c384ca3681e9 100644
@@ -1840,6 +1840,49 @@ SOC_SINGLE_TLV("SPKOUTR Mixer DACR Volume", WM8962_SPEAKER_MIXER_5,
 	       4, 1, 0, inmix_tlv),
 };
 
+static int tp_event(struct snd_soc_dapm_widget *w,
+		    struct snd_kcontrol *kcontrol, int event)
+{
+	int ret, reg, val, mask;
+	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+
+	ret = pm_runtime_resume_and_get(component->dev);
+	if (ret < 0) {
+		dev_err(component->dev, "Failed to resume device: %d\n", ret);
+		return ret;
+	}
+
+	reg = WM8962_ADDITIONAL_CONTROL_4;
+
+	if (!strcmp(w->name, "TEMP_HP")) {
+		mask = WM8962_TEMP_ENA_HP_MASK;
+		val = WM8962_TEMP_ENA_HP;
+	} else if (!strcmp(w->name, "TEMP_SPK")) {
+		mask = WM8962_TEMP_ENA_SPK_MASK;
+		val = WM8962_TEMP_ENA_SPK;
+	} else {
+		pm_runtime_put(component->dev);
+		return -EINVAL;
+	}
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMD:
+		val = 0;
+		fallthrough;
+	case SND_SOC_DAPM_POST_PMU:
+		ret = snd_soc_component_update_bits(component, reg, mask, val);
+		break;
+	default:
+		WARN(1, "Invalid event %d\n", event);
+		pm_runtime_put(component->dev);
+		return -EINVAL;
+	}
+
+	pm_runtime_put(component->dev);
+
+	return 0;
+}
+
 static int cp_event(struct snd_soc_dapm_widget *w,
 		    struct snd_kcontrol *kcontrol, int event)
 {
@@ -2132,8 +2175,10 @@ SND_SOC_DAPM_SUPPLY("TOCLK", WM8962_ADDITIONAL_CONTROL_1, 0, 0, NULL, 0),
 SND_SOC_DAPM_SUPPLY_S("DSP2", 1, WM8962_DSP2_POWER_MANAGEMENT,
 		      WM8962_DSP2_ENA_SHIFT, 0, dsp2_event,
 		      SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
-SND_SOC_DAPM_SUPPLY("TEMP_HP", WM8962_ADDITIONAL_CONTROL_4, 2, 0, NULL, 0),
-SND_SOC_DAPM_SUPPLY("TEMP_SPK", WM8962_ADDITIONAL_CONTROL_4, 1, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("TEMP_HP", SND_SOC_NOPM, 0, 0, tp_event,
+		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("TEMP_SPK", SND_SOC_NOPM, 0, 0, tp_event,
+		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
 
 SND_SOC_DAPM_MIXER("INPGAL", WM8962_LEFT_INPUT_PGA_CONTROL, 4, 0,
 		   inpgal, ARRAY_SIZE(inpgal)),
@@ -3750,6 +3795,11 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
 	if (ret < 0)
 		goto err_pm_runtime;
 
+	regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4,
+			    WM8962_TEMP_ENA_HP_MASK, 0);
+	regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4,
+			    WM8962_TEMP_ENA_SPK_MASK, 0);
+
 	regcache_cache_only(wm8962->regmap, true);
 
 	/* The drivers should power up as needed */
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 6/12 ASoC: codecs: jz4725b: add missed Line In power control bit

In reply to Sasha Levin

From: Siarhei Volkau <[email protected]>

[ Upstream commit 1013999b431b4bcdc1f5ae47dd3338122751db31 ]

Line In path stayed powered off during capturing or bypass to mixer.

---
 sound/soc/codecs/jz4725b.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
sound/soc/codecs/jz4725b.c +2 -1
index 2567a5d15b55..a04b8d5d1ded 100644
@@ -236,7 +236,8 @@ static const struct snd_soc_dapm_widget jz4725b_codec_dapm_widgets[] = {
 	SND_SOC_DAPM_MIXER("DAC to Mixer", JZ4725B_CODEC_REG_CR1,
 			   REG_CR1_DACSEL_OFFSET, 0, NULL, 0),
 
-	SND_SOC_DAPM_MIXER("Line In", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Line In", JZ4725B_CODEC_REG_PMR1,
+			   REG_PMR1_SB_LIN_OFFSET, 1, NULL, 0),
 	SND_SOC_DAPM_MIXER("HP Out", JZ4725B_CODEC_REG_CR1,
 			   REG_CR1_HP_DIS_OFFSET, 1, NULL, 0),
 
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/12 ASoC: wm8997: Revert "ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe"

In reply to Sasha Levin

From: Zhang Qilong <[email protected]>

[ Upstream commit 68ce83e3bb26feba0fcdd59667fde942b3a600a1 ]

This reverts commit 41a736ac20602f64773e80f0f5b32cde1830a44a.

The pm_runtime_disable is redundant when error returns in wm8997_probe, we just revert the old patch to fix it.

---
 sound/soc/codecs/wm8997.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
sound/soc/codecs/wm8997.c +3 -3
index 07378714b013..229f2986cd96 100644
@@ -1156,6 +1156,9 @@ static int wm8997_probe(struct platform_device *pdev)
 		regmap_update_bits(arizona->regmap, wm8997_digital_vu[i],
 				   WM8997_DIG_VU, WM8997_DIG_VU);
 
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_idle(&pdev->dev);
+
 	arizona_init_common(arizona);
 
 	ret = arizona_init_vol_limit(arizona);
@@ -1174,9 +1177,6 @@ static int wm8997_probe(struct platform_device *pdev)
 		goto err_spk_irqs;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_idle(&pdev->dev);
-
 	return ret;
 
 err_spk_irqs:
Signature · 1 line
2.35.1
#9 lore raw

Re: [PATCH AUTOSEL 5.4 09/12] ASoC: codecs: jz4725b: fix capture selector naming

In reply to Sasha Levin

вс, 6 нояб. 2022 г. в 20:06, Sasha Levin <[email protected]>:

Quoted 1 line

+ {"ADC Sourc Capture Routee", "Line In", "Line In"},

Please make sure you're grabbing df496157a5af companion commit.

BR,
Siarhei