5.15.79-rc1 review
Subsystems (2)
Greg Kroah-Hartman
maintainerPATCH 1/131 thunderbolt: Tear down existing tunnels when resuming from hibernate
In reply to Greg Kroah-HartmanFrom: Mika Westerberg <[email protected]>
commit 43bddb26e20af916249b5318200cfe1734c1700c upstream.
If the boot firmware implements connection manager of its own it may not create the paths in the same way or order we do. For example it may create first PCIe tunnel and then USB3 tunnel. When we restore our tunnels (first de-activating them) we may be doing that over completely different tunnels and that leaves them possibly non-functional. For this reason we re-use the tunnel discovery functionality and find out all the existing tunnels, and tear them down. Once that is done we can restore our tunnels.
--- drivers/thunderbolt/path.c | 38 ++++++++++++++---------- drivers/thunderbolt/tb.c | 68 ++++++++++++++++++++++++++++++++----------- drivers/thunderbolt/tb.h | 5 ++- drivers/thunderbolt/tunnel.c | 27 ++++++++++------- drivers/thunderbolt/tunnel.h | 9 +++-- 5 files changed, 102 insertions(+), 45 deletions(-)
drivers/thunderbolt/path.c +23 -15
@@ -85,11 +85,12 @@ static int tb_path_find_src_hopid(struct* @dst_hopid: HopID to the @dst (%-1 if don't care) * @last: Last port is filled here if not %NULL * @name: Name of the path +* @alloc_hopid: Allocate HopIDs for the ports * * Follows a path starting from @src and @src_hopid to the last output -* port of the path. Allocates HopIDs for the visited ports. Call -* tb_path_free() to release the path and allocated HopIDs when the path -* is not needed anymore. +* port of the path. Allocates HopIDs for the visited ports (if +* @alloc_hopid is true). Call tb_path_free() to release the path and +* allocated HopIDs when the path is not needed anymore. * * Note function discovers also incomplete paths so caller should check * that the @dst port is the expected one. If it is not, the path can be
@@ -99,7 +100,8 @@ static int tb_path_find_src_hopid(struct*/ struct tb_path *tb_path_discover (struct tb_port *src,int src_hopid,struct tb_port *dst,int dst_hopid, -struct tb_port **last,const char *name) +struct tb_port **last,const char *name, +bool alloc_hopid) {struct tb_port *out_port;struct tb_regs_hop hop;
@@ -156,6 +158,7 @@ struct tb_path *tb_path_discover(struct path->tb = src->sw->tb; path->path_length = num_hops; path->activated = true; + path->alloc_hopid = alloc_hopid; path->hops =kcalloc (num_hops,sizeof (*path->hops),GFP_KERNEL );if (!path->hops) {
@@ -177,13 +180,14 @@ struct tb_path *tb_path_discover(struct goto err; } -if (tb_port_alloc_in_hopid (p, h, h) <0 ) +if (alloc_hopid &&tb_port_alloc_in_hopid (p, h, h) <0 ) goto err; out_port = &sw->ports[hop.out_port]; next_hop = hop.next_hop; -if (tb_port_alloc_out_hopid (out_port, next_hop, next_hop) <0 ) { +if (alloc_hopid && +tb_port_alloc_out_hopid (out_port, next_hop, next_hop) <0 ) {tb_port_release_in_hopid (p, h); goto err; }
@@ -263,6 +267,8 @@ struct tb_path *tb_path_alloc(struct tbreturn NULL ; } + path->alloc_hopid = true; + in_hopid = src_hopid; out_port =NULL ;
@@ -345,17 +351,19 @@ err:*/ void tb_path_free (struct tb_path *path) { -int i; +if (path->alloc_hopid) { +int i; -for (i =0 ; i < path->path_length; i++) { -const struct tb_path_hop *hop = &path->hops[i]; +for (i =0 ; i < path->path_length; i++) { +const struct tb_path_hop *hop = &path->hops[i]; -if (hop->in_port) -tb_port_release_in_hopid (hop->in_port, - hop->in_hop_index); -if (hop->out_port) -tb_port_release_out_hopid (hop->out_port, - hop->next_hop_index); +if (hop->in_port) +tb_port_release_in_hopid (hop->in_port, + hop->in_hop_index); +if (hop->out_port) +tb_port_release_out_hopid (hop->out_port, + hop->next_hop_index); + } }kfree (path->hops);
drivers/thunderbolt/tb.c +52 -16
120 lines not on this page · raw message
drivers/thunderbolt/tb.h +4 -1
@@ -354,6 +354,7 @@ enum tb_path_port {* when deactivating this path * @hops: Path hops * @path_length: How many hops the path uses +* @alloc_hopid: Does this path consume port HopID * * A path consists of a number of hops (see &struct tb_path_hop). To * establish a PCIe tunnel two paths have to be created between the two
@@ -374,6 +375,7 @@ struct tb_path {bool clear_fc;struct tb_path_hop *hops;int path_length; +bool alloc_hopid; };/* HopIDs 0-7 are reserved by the Thunderbolt protocol */
@@ -957,7 +959,8 @@ int tb_dp_port_enable(struct tb_port *postruct tb_path *tb_path_discover (struct tb_port *src,int src_hopid,struct tb_port *dst,int dst_hopid, -struct tb_port **last,const char *name); +struct tb_port **last,const char *name, +bool alloc_hopid);struct tb_path *tb_path_alloc (struct tb *tb,struct tb_port *src,int src_hopid,struct tb_port *dst,int dst_hopid,int link_nr,const char *name);
drivers/thunderbolt/tunnel.c +17 -10
@@ -207,12 +207,14 @@ static int tb_pci_init_path(struct tb_pa* tb_tunnel_discover_pci() - Discover existing PCIe tunnels * @tb: Pointer to the domain structure * @down: PCIe downstream adapter +* @alloc_hopid: Allocate HopIDs from visited ports * * If @down adapter is active, follows the tunnel to the PCIe upstream * adapter and back. Returns the discovered tunnel or %NULL if there was * no tunnel. */ -struct tb_tunnel *tb_tunnel_discover_pci (struct tb *tb,struct tb_port *down) +struct tb_tunnel *tb_tunnel_discover_pci (struct tb *tb,struct tb_port *down, +bool alloc_hopid) {struct tb_tunnel *tunnel;struct tb_path *path;
@@ -233,7 +235,7 @@ struct tb_tunnel *tb_tunnel_discover_pci* case. */ path =tb_path_discover (down,TB_PCI_HOPID ,NULL ,-1 , - &tunnel->dst_port,"PCIe Up" ); + &tunnel->dst_port,"PCIe Up" , alloc_hopid);if (!path) {/* Just disable the downstream port */ tb_pci_port_enable (down, false);
@@ -244,7 +246,7 @@ struct tb_tunnel *tb_tunnel_discover_pci goto err_free; path =tb_path_discover (tunnel->dst_port,-1 , down,TB_PCI_HOPID ,NULL , -"PCIe Down" ); +"PCIe Down" , alloc_hopid);if (!path) goto err_deactivate; tunnel->paths[TB_PCI_PATH_DOWN ] = path;
@@ -761,6 +763,7 @@ static int tb_dp_init_video_path(struct* tb_tunnel_discover_dp() - Discover existing Display Port tunnels * @tb: Pointer to the domain structure * @in: DP in adapter +* @alloc_hopid: Allocate HopIDs from visited ports * * If @in adapter is active, follows the tunnel to the DP out adapter * and back. Returns the discovered tunnel or %NULL if there was no
@@ -768,7 +771,8 @@ static int tb_dp_init_video_path(struct* * Return: DP tunnel or %NULL if no tunnel found. */ -struct tb_tunnel *tb_tunnel_discover_dp (struct tb *tb,struct tb_port *in) +struct tb_tunnel *tb_tunnel_discover_dp (struct tb *tb,struct tb_port *in, +bool alloc_hopid) {struct tb_tunnel *tunnel;struct tb_port *port;
@@ -787,7 +791,7 @@ struct tb_tunnel *tb_tunnel_discover_dp( tunnel->src_port = in; path =tb_path_discover (in,TB_DP_VIDEO_HOPID ,NULL ,-1 , - &tunnel->dst_port,"Video" ); + &tunnel->dst_port,"Video" , alloc_hopid);if (!path) {/* Just disable the DP IN port */ tb_dp_port_enable (in, false);
@@ -797,14 +801,15 @@ struct tb_tunnel *tb_tunnel_discover_dp(if (tb_dp_init_video_path (tunnel->paths[TB_DP_VIDEO_PATH_OUT ])) goto err_free; - path =tb_path_discover (in,TB_DP_AUX_TX_HOPID ,NULL ,-1 ,NULL ,"AUX TX" ); + path =tb_path_discover (in,TB_DP_AUX_TX_HOPID ,NULL ,-1 ,NULL ,"AUX TX" , + alloc_hopid);if (!path) goto err_deactivate; tunnel->paths[TB_DP_AUX_PATH_OUT ] = path;tb_dp_init_aux_path (tunnel->paths[TB_DP_AUX_PATH_OUT ]); path =tb_path_discover (tunnel->dst_port,-1 , in,TB_DP_AUX_RX_HOPID , - &port,"AUX RX" ); + &port,"AUX RX" , alloc_hopid);if (!path) goto err_deactivate; tunnel->paths[TB_DP_AUX_PATH_IN ] = path;
@@ -1344,12 +1349,14 @@ static void tb_usb3_init_path(struct tb_* tb_tunnel_discover_usb3() - Discover existing USB3 tunnels * @tb: Pointer to the domain structure * @down: USB3 downstream adapter +* @alloc_hopid: Allocate HopIDs from visited ports * * If @down adapter is active, follows the tunnel to the USB3 upstream * adapter and back. Returns the discovered tunnel or %NULL if there was * no tunnel. */ -struct tb_tunnel *tb_tunnel_discover_usb3 (struct tb *tb,struct tb_port *down) +struct tb_tunnel *tb_tunnel_discover_usb3 (struct tb *tb,struct tb_port *down, +bool alloc_hopid) {struct tb_tunnel *tunnel;struct tb_path *path;
@@ -1370,7 +1377,7 @@ struct tb_tunnel *tb_tunnel_discover_usb* case. */ path =tb_path_discover (down,TB_USB3_HOPID ,NULL ,-1 , - &tunnel->dst_port,"USB3 Down" ); + &tunnel->dst_port,"USB3 Down" , alloc_hopid);if (!path) {/* Just disable the downstream port */ tb_usb3_port_enable (down, false);
@@ -1380,7 +1387,7 @@ struct tb_tunnel *tb_tunnel_discover_usbtb_usb3_init_path (tunnel->paths[TB_USB3_PATH_DOWN ]); path =tb_path_discover (tunnel->dst_port,-1 , down,TB_USB3_HOPID ,NULL , -"USB3 Up" ); +"USB3 Up" , alloc_hopid);if (!path) goto err_deactivate; tunnel->paths[TB_USB3_PATH_UP ] = path;
drivers/thunderbolt/tunnel.h +6 -3
@@ -64,10 +64,12 @@ struct tb_tunnel {int allocated_down; }; -struct tb_tunnel *tb_tunnel_discover_pci (struct tb *tb,struct tb_port *down); +struct tb_tunnel *tb_tunnel_discover_pci (struct tb *tb,struct tb_port *down, +bool alloc_hopid);struct tb_tunnel *tb_tunnel_alloc_pci (struct tb *tb,struct tb_port *up,struct tb_port *down); -struct tb_tunnel *tb_tunnel_discover_dp (struct tb *tb,struct tb_port *in); +struct tb_tunnel *tb_tunnel_discover_dp (struct tb *tb,struct tb_port *in, +bool alloc_hopid);struct tb_tunnel *tb_tunnel_alloc_dp (struct tb *tb,struct tb_port *in,struct tb_port *out,int link_nr,int max_up,int max_down);
@@ -77,7 +79,8 @@ struct tb_tunnel *tb_tunnel_alloc_dma(st int receive_ring);bool tb_tunnel_match_dma (const struct tb_tunnel *tunnel,int transmit_path,int transmit_ring,int receive_path,int receive_ring); -struct tb_tunnel *tb_tunnel_discover_usb3 (struct tb *tb,struct tb_port *down); +struct tb_tunnel *tb_tunnel_discover_usb3 (struct tb *tb,struct tb_port *down, +bool alloc_hopid);struct tb_tunnel *tb_tunnel_alloc_usb3 (struct tb *tb,struct tb_port *up,struct tb_port *down,int max_up,int max_down);
Greg Kroah-Hartman
maintainerPATCH 10/131 wifi: cfg80211: fix memory leak in query_regdb_file()
In reply to Greg Kroah-HartmanFrom: Arend van Spriel <[email protected]>
[ Upstream commit 57b962e627ec0ae53d4d16d7bd1033e27e67677a ]
In the function query_regdb_file() the alpha2 parameter is duplicated using kmemdup() and subsequently freed in regdb_fw_cb(). However, request_firmware_nowait() can fail without calling regdb_fw_cb() and thus leak memory.
--- net/wireless/reg.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
net/wireless/reg.c +9 -3
@@ -1083,6 +1083,8 @@ MODULE_FIRMWARE("regulatory.db");static int query_regdb_file (const char *alpha2) { +int err; +ASSERT_RTNL ();if (regdb)
@@ -1092,9 +1094,13 @@ static int query_regdb_file(const char *alpha2)if (!alpha2)return -ENOMEM ; -return request_firmware_nowait (THIS_MODULE , true,"regulatory.db" , - ®_pdev->dev,GFP_KERNEL , - (void *)alpha2, regdb_fw_cb); + err =request_firmware_nowait (THIS_MODULE , true,"regulatory.db" , + ®_pdev->dev,GFP_KERNEL , + (void *)alpha2, regdb_fw_cb); +if (err) +kfree (alpha2); + +return err; }int reg_reload_regdb (void )
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 11/131 soundwire: qcom: reinit broadcast completion
In reply to Greg Kroah-HartmanFrom: Srinivas Kandagatla <[email protected]>
[ Upstream commit f936fa7a954b262cb3908bbc8f01ba19dfaf9fbf ]
For some reason we never reinit the broadcast completion, there is a danger that broadcast commands could be treated as completed by driver from previous complete status.
Fix this by reinitializing the completion before sending a broadcast command.
--- drivers/soundwire/qcom.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/soundwire/qcom.c +3 -0
@@ -315,6 +315,9 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data,if (swrm_wait_for_wr_fifo_avail (swrm))return SDW_CMD_FAIL_OTHER ; +if (cmd_id ==SWR_BROADCAST_CMD_ID ) +reinit_completion (&swrm->broadcast); +/* Its assumed that write is okay as we do not get any status back */ swrm->reg_write (swrm,SWRM_CMD_FIFO_WR_CMD , val);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 12/131 soundwire: qcom: check for outanding writes before doing a read
In reply to Greg Kroah-HartmanFrom: Srinivas Kandagatla <[email protected]>
[ Upstream commit 49a467310dc4fae591a3547860ee04d8730780f4 ]
Reading will increase the fifo count, so check for outstanding cmd wrt. write fifo depth to avoid overflow as read will also increase write fifo cnt.
--- drivers/soundwire/qcom.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/soundwire/qcom.c +6 -0
@@ -351,6 +351,12 @@ static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *swrm, val =swrm_get_packed_reg_val (&swrm->rcmd_id, len, dev_addr, reg_addr); +/* +* Check for outstanding cmd wrt. write fifo depth to avoid +* overflow as read will also increase write fifo cnt. +*/ +swrm_wait_for_wr_fifo_avail (swrm); +/* wait for FIFO RD to complete to avoid overflow */ usleep_range (100 ,105 ); swrm->reg_write (swrm,SWRM_CMD_FIFO_RD_CMD , val);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 13/131 bpf, verifier: Fix memory leak in array reallocation for stack state
In reply to Greg Kroah-HartmanFrom: Kees Cook <[email protected]>
[ Upstream commit 42378a9ca55347102bbf86708776061d8fe3ece2 ]
If an error (NULL) is returned by krealloc(), callers of realloc_array() were setting their allocation pointers to NULL, but on error krealloc() does not touch the original allocation. This would result in a memory resource leak. Instead, free the old allocation on the error handling path.
The memory leak information is as follows as also reported by Zhengchao:
unreferenced object 0xffff888019801800 (size 256):
comm "bpf_repo", pid 6490, jiffies 4294959200 (age 17.170s) hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000b211474b>] __kmalloc_node_track_caller+0x45/0xc0
[<0000000086712a0b>] krealloc+0x83/0xd0
[<00000000139aab02>] realloc_array+0x82/0xe2
[<00000000b1ca41d1>] grow_stack_state+0xfb/0x186
[<00000000cd6f36d2>] check_mem_access.cold+0x141/0x1341
[<0000000081780455>] do_check_common+0x5358/0xb350
[<0000000015f6b091>] bpf_check.cold+0xc3/0x29d
[<000000002973c690>] bpf_prog_load+0x13db/0x2240
[<00000000028d1644>] __sys_bpf+0x1605/0x4ce0
[<00000000053f29bd>] __x64_sys_bpf+0x75/0xb0
[<0000000056fedaf5>] do_syscall_64+0x35/0x80
[<000000002bd58261>] entry_SYSCALL_64_after_hwframe+0x63/0xcd--- kernel/bpf/verifier.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +7 -2
@@ -770,12 +770,17 @@ static void *copy_array(void *dst, const void *src, size_t n, size_t size, gfp_t*/ static void *realloc_array (void *arr,size_t old_n,size_t new_n,size_t size) { +void *new_arr; +if (!new_n || old_n == new_n) goto out; - arr =krealloc_array (arr, new_n, size,GFP_KERNEL ); -if (!arr) + new_arr =krealloc_array (arr, new_n, size,GFP_KERNEL ); +if (!new_arr) { +kfree (arr);return NULL ; + } + arr = new_arr;if (new_n > old_n)memset (arr + old_n * size,0 , (new_n - old_n) * size);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 14/131 bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues
In reply to Greg Kroah-HartmanFrom: Wang Yufen <[email protected]>
[ Upstream commit 8ec95b94716a1e4d126edc3fb2bc426a717e2dba ]
When running test_sockmap selftests, the following warning appears:
WARNING: CPU: 2 PID: 197 at net/core/stream.c:205 sk_stream_kill_queues+0xd3/0xf0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 tcp_rcv_state_process+0xd28/0x1380 ? tcp_v4_do_rcv+0x77/0x2c0 tcp_v4_do_rcv+0x77/0x2c0 __release_sock+0x106/0x130 __tcp_close+0x1a7/0x4e0 tcp_close+0x20/0x70 inet_release+0x3c/0x80 __sock_release+0x3a/0xb0 sock_close+0x14/0x20 __fput+0xa3/0x260 task_work_run+0x59/0xb0 exit_to_user_mode_prepare+0x1b3/0x1c0 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae
The root case is in commit 84472b436e76 ("bpf, sockmap: Fix more uncharged while msg has more_data"), where I used msg->sg.size to replace the tosend, causing breakage:
if (msg->apply_bytes && msg->apply_bytes < tosend)
tosend = psock->apply_bytes;--- net/ipv4/tcp_bpf.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
net/ipv4/tcp_bpf.c +5 -3
@@ -279,7 +279,7 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock, {bool cork = false, enospc =sk_msg_full (msg);struct sock *sk_redir; -u32 tosend, delta =0 ; +u32 tosend, origsize, sent, delta =0 ;u32 eval = __SK_NONE;int ret;
@@ -334,10 +334,12 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock, cork = true; psock->cork =NULL ; } -sk_msg_return (sk, msg, msg->sg.size); +sk_msg_return (sk, msg, tosend);release_sock (sk); + origsize = msg->sg.size; ret =tcp_bpf_sendmsg_redir (sk_redir, msg, tosend, flags); + sent = origsize - msg->sg.size;if (eval == __SK_REDIRECT)sock_put (sk_redir);
@@ -376,7 +378,7 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock, msg->sg.data[msg->sg.start].page_link && msg->sg.data[msg->sg.start].length) {if (eval == __SK_REDIRECT) -sk_mem_charge (sk, msg->sg.size); +sk_mem_charge (sk, tosend - sent); goto more_data; } }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 15/131 wifi: mac80211: Set TWT Information Frame Disabled bit as 1
In reply to Greg Kroah-HartmanFrom: Howard Hsu <[email protected]>
[ Upstream commit 30ac96f7cc973bb850c718c9bbe1fdcedfbe826b ]
The TWT Information Frame Disabled bit of control field of TWT Setup frame shall be set to 1 since handling TWT Information frame is not supported by current mac80211 implementation.
--- net/mac80211/s1g.c | 3 +++ 1 file changed, 3 insertions(+)
net/mac80211/s1g.c +3 -0
@@ -112,6 +112,9 @@ ieee80211_s1g_rx_twt_setup(struct ieee80211_sub_if_data *sdata, goto out; } +/* TWT Information not supported yet */ + twt->control |=IEEE80211_TWT_CONTROL_RX_DISABLED ; +drv_add_twt_setup (sdata->local, sdata, &sta->sta, twt); out:ieee80211_s1g_send_twt_setup (sdata, mgmt->sa, sdata->vif.addr, twt);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 16/131 bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE
In reply to Greg Kroah-HartmanFrom: Pu Lehui <[email protected]>
[ Upstream commit 34de8e6e0e1f66e431abf4123934a2581cb5f133 ]
When using bpftool to pin {PROG, MAP, LINK} without FILE, segmentation fault will occur. The reson is that the lack of FILE will cause strlen to trigger NULL pointer dereference. The corresponding stacktrace is shown below:
do_pin
do_pin_any
do_pin_fd
mount_bpffs_for_pin
strlen(name) <- NULL pointer dereference
Fix it by adding validation to the common process.
--- tools/bpf/bpftool/common.c | 3 +++ 1 file changed, 3 insertions(+)
tools/bpf/bpftool/common.c +3 -0
@@ -278,6 +278,9 @@ int do_pin_any(int argc, char **argv, int (*get_fd)(int *, char ***))int err;int fd; +if (!REQ_ARGS (3 )) +return -EINVAL ; + fd =get_fd (&argc, &argv);if (fd <0 )return fd;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 17/131 HID: hyperv: fix possible memory leak in mousevsc_probe()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit b5bcb94b0954a026bbd671741fdb00e7141f9c91 ]
If hid_add_device() returns error, it should call hid_destroy_device() to free hid_dev which is allocated in hid_allocate_device().
--- drivers/hid/hid-hyperv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hid/hid-hyperv.c +1 -1
@@ -498,7 +498,7 @@ static int mousevsc_probe(struct hv_device *device, ret =hid_add_device (hid_dev);if (ret) - goto probe_err1; + goto probe_err2; ret =hid_parse (hid_dev);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 18/131 bpf, sockmap: Fix sk->sk_forward_alloc warn_on in sk_stream_kill_queues
In reply to Greg Kroah-HartmanFrom: Wang Yufen <[email protected]>
[ Upstream commit d8616ee2affcff37c5d315310da557a694a3303d ]
During TCP sockmap redirect pressure test, the following warning is triggered:
WARNING: CPU: 3 PID: 2145 at net/core/stream.c:205 sk_stream_kill_queues+0xbc/0xd0 CPU: 3 PID: 2145 Comm: iperf Kdump: loaded Tainted: G W 5.10.0+ #9 Call Trace: inet_csk_destroy_sock+0x55/0x110 inet_csk_listen_stop+0xbb/0x380 tcp_close+0x41b/0x480 inet_release+0x42/0x80 __sock_release+0x3d/0xa0 sock_close+0x11/0x20 __fput+0x9d/0x240 task_work_run+0x62/0x90 exit_to_user_mode_prepare+0x110/0x120 syscall_exit_to_user_mode+0x27/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason we observed is that:
When the listener is closing, a connection may have completed the three-way handshake but not accepted, and the client has sent some packets. The child sks in accept queue release by inet_child_forget()->inet_csk_destroy_sock(), but psocks of child sks have not released.
To fix, add sock_map_destroy to release psocks.
Stable-dep-of: 8bbabb3fddcd ("bpf, sock_map: Move cancel_work_sync() out of sock lock")
--- include/linux/bpf.h | 1 + include/linux/skmsg.h | 1 + net/core/skmsg.c | 1 + net/core/sock_map.c | 23 +++++++++++++++++++++++ net/ipv4/tcp_bpf.c | 1 + 5 files changed, 27 insertions(+)
include/linux/bpf.h +1 -0
@@ -2022,6 +2022,7 @@ int sock_map_get_from_fd(const union bpf_attr *attr, struct bpf_prog *prog);int sock_map_prog_detach (const union bpf_attr *attr,enum bpf_prog_type ptype);int sock_map_update_elem_sys (struct bpf_map *map,void *key,void *value,u64 flags);void sock_map_unhash (struct sock *sk); +void sock_map_destroy (struct sock *sk);void sock_map_close (struct sock *sk,long timeout);#else static inline int bpf_prog_offload_init(struct bpf_prog *prog,
include/linux/skmsg.h +1 -0
@@ -96,6 +96,7 @@ struct sk_psock {spinlock_t link_lock;refcount_t refcnt;void (*saved_unhash)(struct sock *sk); +void (*saved_destroy)(struct sock *sk);void (*saved_close)(struct sock *sk,long timeout);void (*saved_write_space)(struct sock *sk);void (*saved_data_ready)(struct sock *sk);
net/core/skmsg.c +1 -0
@@ -720,6 +720,7 @@ struct sk_psock *sk_psock_init(struct sock *sk, int node) psock->eval = __SK_NONE; psock->sk_proto = prot; psock->saved_unhash = prot->unhash; + psock->saved_destroy = prot->destroy; psock->saved_close = prot->close; psock->saved_write_space = sk->sk_write_space;
net/core/sock_map.c +23 -0
@@ -1524,6 +1524,29 @@ void sock_map_unhash(struct sock *sk) }EXPORT_SYMBOL_GPL (sock_map_unhash); +void sock_map_destroy (struct sock *sk) +{ +void (*saved_destroy)(struct sock *sk); +struct sk_psock *psock; + +rcu_read_lock (); + psock =sk_psock_get (sk); +if (unlikely (!psock)) { +rcu_read_unlock (); +if (sk->sk_prot->destroy) + sk->sk_prot->destroy (sk); +return ; + } + + saved_destroy = psock->saved_destroy; +sock_map_remove_links (sk, psock); +rcu_read_unlock (); +sk_psock_stop (psock, true); +sk_psock_put (sk, psock); +saved_destroy (sk); +} +EXPORT_SYMBOL_GPL (sock_map_destroy); +void sock_map_close (struct sock *sk,long timeout) {void (*saved_close)(struct sock *sk,long timeout);
net/ipv4/tcp_bpf.c +1 -0
@@ -543,6 +543,7 @@ static void tcp_bpf_rebuild_protos(struct proto prot[TCP_BPF_NUM_CFGS], struct proto *base) { prot[TCP_BPF_BASE ] = *base; + prot[TCP_BPF_BASE ].destroy = sock_map_destroy; prot[TCP_BPF_BASE ].close = sock_map_close; prot[TCP_BPF_BASE ].recvmsg = tcp_bpf_recvmsg; prot[TCP_BPF_BASE ].sock_is_readable = sk_msg_is_readable;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 19/131 bpf: Fix sockmap calling sleepable function in teardown path
In reply to Greg Kroah-HartmanFrom: John Fastabend <[email protected]>
[ Upstream commit 697fb80a53642be624f5121b6ca9d66769c180e0 ]
syzbot reproduced the bug ...
BUG: sleeping function called from invalid context at kernel/workqueue.c:3010
... with the following stack trace fragment ...
start_flush_work kernel/workqueue.c:3010 [inline] __flush_work+0x109/0xb10 kernel/workqueue.c:3074 __cancel_work_timer+0x3f9/0x570 kernel/workqueue.c:3162 sk_psock_stop+0x4cb/0x630 net/core/skmsg.c:802 sock_map_destroy+0x333/0x760 net/core/sock_map.c:1581 inet_csk_destroy_sock+0x196/0x440 net/ipv4/inet_connection_sock.c:1130 __tcp_close+0xd5b/0x12b0 net/ipv4/tcp.c:2897 tcp_close+0x29/0xc0 net/ipv4/tcp.c:2909
... introduced by d8616ee2affc. Do a quick trace of the code path and the bug is obvious:
inet_csk_destroy_sock(sk)
sk_prot->destroy(sk); <--- sock_map_destroy
sk_psock_stop(, true); <--- true so cancel workqueue
cancel_work_sync() <--- splat, because *_bh_disable()
We can not call cancel_work_sync() from inside destroy path. So mark the sk_psock_stop call to skip this cancel_work_sync(). This will avoid the BUG, but means we may run sk_psock_backlog after or during the destroy op. We zapped the ingress_skb queue in sk_psock_stop (safe to do with local_bh_disable) so its empty and the sk_psock_backlog work item will not find any pkts to process here. However, because we are not going to wait for it or clear its ->state its possible it kicks off or is already running. This should be 'safe' up until psock drops its refcnt to psock->sk. The sock_put() that drops this reference is only done at psock destroy time from sk_psock_destroy(). This is done through workqueue when sk_psock_drop() is called on psock refnt reaches 0. And importantly sk_psock_destroy() does a cancel_work_sync(). So trivial fix works.
I've had hit or miss luck reproducing this caught it once or twice with the provided reproducer when running with many runners. However, syzkaller is very good at reproducing so relying on syzkaller to verify fix.
Stable-dep-of: 8bbabb3fddcd ("bpf, sock_map: Move cancel_work_sync() out of sock lock")
--- net/core/sock_map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/sock_map.c +1 -1
@@ -1541,7 +1541,7 @@ void sock_map_destroy(struct sock *sk) saved_destroy = psock->saved_destroy;sock_map_remove_links (sk, psock);rcu_read_unlock (); -sk_psock_stop (psock, true); +sk_psock_stop (psock, false);sk_psock_put (sk, psock);saved_destroy (sk); }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 2/131 thunderbolt: Add DP OUT resource when DP tunnel is discovered
In reply to Greg Kroah-HartmanFrom: Sanjay R Mehta <[email protected]>
commit b60e31bf18a7064032dbcb73dcb5b58f8a00a110 upstream.
If the boot firmware implements a connection manager of its own it may create a DisplayPort tunnel and will be handed off to Linux connection manager, but the DP OUT resource is not saved in the dp_resource list.
This patch adds tunnelled DP OUT port to the dp_resource list once the DP tunnel is discovered.
--- drivers/thunderbolt/tb.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
drivers/thunderbolt/tb.c +28 -0
@@ -105,6 +105,32 @@ static void tb_remove_dp_resources(struc } } +static void tb_discover_dp_resource (struct tb *tb,struct tb_port *port) +{ +struct tb_cm *tcm =tb_priv (tb); +struct tb_port *p; + +list_for_each_entry (p, &tcm->dp_resources, list) { +if (p == port) +return ; + } + +tb_port_dbg (port,"DP %s resource available discovered\n" , +tb_port_is_dpin (port) ?"IN" :"OUT" ); +list_add_tail (&port->list, &tcm->dp_resources); +} + +static void tb_discover_dp_resources (struct tb *tb) +{ +struct tb_cm *tcm =tb_priv (tb); +struct tb_tunnel *tunnel; + +list_for_each_entry (tunnel, &tcm->tunnel_list, list) { +if (tb_tunnel_is_dp (tunnel)) +tb_discover_dp_resource (tb, tunnel->dst_port); + } +} +static void tb_switch_discover_tunnels (struct tb_switch *sw,struct list_head *list,bool alloc_hopids)
@@ -1396,6 +1422,8 @@ static int tb_start(struct tb *tb)tb_scan_switch (tb->root_switch);/* Find out tunnels created by the boot firmware */ tb_discover_tunnels (tb); +/* Add DP resources from the DP tunnels created by the boot firmware */ +tb_discover_dp_resources (tb);/* * If the boot firmware did not create USB 3.x tunnels create them * now for the whole topology.
Greg Kroah-Hartman
maintainerPATCH 20/131 bpf, sock_map: Move cancel_work_sync() out of sock lock
In reply to Greg Kroah-HartmanFrom: Cong Wang <[email protected]>
[ Upstream commit 8bbabb3fddcd0f858be69ed5abc9b470a239d6f2 ]
Stanislav reported a lockdep warning, which is caused by the cancel_work_sync() called inside sock_map_close(), as analyzed below by Jakub:
psock->work.func = sk_psock_backlog()
ACQUIRE psock->work_mutex
sk_psock_handle_skb()
skb_send_sock()
__skb_send_sock()
sendpage_unlocked()
kernel_sendpage()
sock->ops->sendpage = inet_sendpage()
sk->sk_prot->sendpage = tcp_sendpage()
ACQUIRE sk->sk_lock
tcp_sendpage_locked()
RELEASE sk->sk_lock RELEASE psock->work_mutex
sock_map_close()
ACQUIRE sk->sk_lock
sk_psock_stop()
sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED)
cancel_work_sync()
__cancel_work_timer()
__flush_work()
// wait for psock->work to finish RELEASE sk->sk_lock
We can move the cancel_work_sync() out of the sock lock protection, but still before saved_close() was called.
--- include/linux/skmsg.h | 2 +- net/core/skmsg.c | 7 ++----- net/core/sock_map.c | 7 ++++--- 3 files changed, 7 insertions(+), 9 deletions(-)
include/linux/skmsg.h +1 -1
@@ -382,7 +382,7 @@ static inline void sk_psock_report_error(struct sk_psock *psock, int err) }struct sk_psock *sk_psock_init (struct sock *sk,int node); -void sk_psock_stop (struct sk_psock *psock,bool wait); +void sk_psock_stop (struct sk_psock *psock);#if IS_ENABLED (CONFIG_BPF_STREAM_PARSER )int sk_psock_init_strp (struct sock *sk,struct sk_psock *psock);
net/core/skmsg.c +2 -5
@@ -797,16 +797,13 @@ static void sk_psock_link_destroy(struct sk_psock *psock) } } -void sk_psock_stop (struct sk_psock *psock,bool wait) +void sk_psock_stop (struct sk_psock *psock) {spin_lock_bh (&psock->ingress_lock);sk_psock_clear_state (psock,SK_PSOCK_TX_ENABLED );sk_psock_cork_free (psock);__sk_psock_zap_ingress (psock);spin_unlock_bh (&psock->ingress_lock); - -if (wait) -cancel_work_sync (&psock->work); }static void sk_psock_done_strp (struct sk_psock *psock);
@@ -844,7 +841,7 @@ void sk_psock_drop(struct sock *sk, struct sk_psock *psock)sk_psock_stop_verdict (sk, psock);write_unlock_bh (&sk->sk_callback_lock); -sk_psock_stop (psock, false); +sk_psock_stop (psock);INIT_RCU_WORK (&psock->rwork, sk_psock_destroy);queue_rcu_work (system_wq, &psock->rwork);
net/core/sock_map.c +4 -3
@@ -1541,7 +1541,7 @@ void sock_map_destroy(struct sock *sk) saved_destroy = psock->saved_destroy;sock_map_remove_links (sk, psock);rcu_read_unlock (); -sk_psock_stop (psock, false); +sk_psock_stop (psock);sk_psock_put (sk, psock);saved_destroy (sk); }
@@ -1564,9 +1564,10 @@ void sock_map_close(struct sock *sk, long timeout) saved_close = psock->saved_close;sock_map_remove_links (sk, psock);rcu_read_unlock (); -sk_psock_stop (psock, true); -sk_psock_put (sk, psock); +sk_psock_stop (psock);release_sock (sk); +cancel_work_sync (&psock->work); +sk_psock_put (sk, psock);saved_close (sk, timeout); }EXPORT_SYMBOL_GPL (sock_map_close);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 21/131 bpf: Add helper macro bpf_for_each_reg_in_vstate
In reply to Greg Kroah-HartmanFrom: Kumar Kartikeya Dwivedi <[email protected]>
[ Upstream commit b239da34203f49c40b5d656220c39647c3ff0b3c ]
For a lot of use cases in future patches, we will want to modify the state of registers part of some same 'group' (e.g. same ref_obj_id). It won't just be limited to releasing reference state, but setting a type flag dynamically based on certain actions, etc.
Hence, we need a way to easily pass a callback to the function that iterates over all registers in current bpf_verifier_state in all frames upto (and including) the curframe.
While in C++ we would be able to easily use a lambda to pass state and the callback together, sadly we aren't using C++ in the kernel. The next best thing to avoid defining a function for each case seems like statement expressions in GNU C. The kernel already uses them heavily, hence they can passed to the macro in the style of a lambda. The statement expression will then be substituted in the for loop bodies.
Variables __state and __reg are set to current bpf_func_state and reg for each invocation of the expression inside the passed in verifier state.
Then, convert mark_ptr_or_null_regs, clear_all_pkt_pointers, release_reference, find_good_pkt_pointers, find_equal_scalars to use bpf_for_each_reg_in_vstate.
Stable-dep-of: f1db20814af5 ("bpf: Fix wrong reg type conversion in release_reference()")
--- include/linux/bpf_verifier.h | 21 ++++++ kernel/bpf/verifier.c | 135 ++++++++--------------------------- 2 files changed, 49 insertions(+), 107 deletions(-)
include/linux/bpf_verifier.h +21 -0
@@ -328,6 +328,27 @@ struct bpf_verifier_state { iter < frame->allocated_stack /BPF_REG_SIZE ; \ iter++, reg = bpf_get_spilled_reg(iter, frame)) +/* Invoke __expr over regsiters in __vst, setting __state and __reg */ +#define bpf_for_each_reg_in_vstate (__vst, __state, __reg, __expr) \ + ({ \ + struct bpf_verifier_state *___vstate = __vst; \ + int ___i, ___j; \ + for (___i = 0; ___i <= ___vstate->curframe; ___i++) { \ + struct bpf_reg_state *___regs; \ + __state = ___vstate->frame[___i]; \ + ___regs = __state->regs; \ + for (___j = 0; ___j < MAX_BPF_REG; ___j++) { \ + __reg = &___regs[___j]; \ + (void)(__expr); \ + } \ + bpf_for_each_spilled_reg(___j, __state, __reg) { \ + if (!__reg) \ + continue; \ + (void)(__expr); \ + } \ + } \ + }) +/* linked list of verifier states used to prune search */ struct bpf_verifier_state_list {struct bpf_verifier_state state;
kernel/bpf/verifier.c +28 -107
213 lines not on this page · raw message
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 22/131 bpf: Fix wrong reg type conversion in release_reference()
In reply to Greg Kroah-HartmanFrom: Youlin Li <[email protected]>
[ Upstream commit f1db20814af532f85e091231223e5e4818e8464b ]
Some helper functions will allocate memory. To avoid memory leaks, the verifier requires the eBPF program to release these memories by calling the corresponding helper functions.
When a resource is released, all pointer registers corresponding to the resource should be invalidated. The verifier use release_references() to do this job, by apply __mark_reg_unknown() to each relevant register.
It will give these registers the type of SCALAR_VALUE. A register that will contain a pointer value at runtime, but of type SCALAR_VALUE, which may allow the unprivileged user to get a kernel pointer by storing this register into a map.
Using __mark_reg_not_init() while NOT allow_ptr_leaks can mitigate this problem.
--- kernel/bpf/verifier.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +6 -2
@@ -5686,8 +5686,12 @@ static int release_reference(struct bpf_verifier_env *env,return err;bpf_for_each_reg_in_vstate (env->cur_state, state, reg, ({ -if (reg->ref_obj_id == ref_obj_id) -__mark_reg_unknown (env, reg); +if (reg->ref_obj_id == ref_obj_id) { +if (!env->allow_ptr_leaks) +__mark_reg_not_init (env, reg); +else +__mark_reg_unknown (env, reg); + } }));return 0 ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 23/131 net: gso: fix panic on frag_list with mixed head alloc types
In reply to Greg Kroah-HartmanFrom: Jiri Benc <[email protected]>
[ Upstream commit 9e4b7a99a03aefd37ba7bb1f022c8efab5019165 ]
Since commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list"), it is allowed to change gso_size of a GRO packet. However, that commit assumes that "checking the first list_skb member suffices; i.e if either of the list_skb members have non head_frag head, then the first one has too".
It turns out this assumption does not hold. We've seen BUG_ON being hit in skb_segment when skbs on the frag_list had differing head_frag with the vmxnet3 driver. This happens because __netdev_alloc_skb and __napi_alloc_skb can return a skb that is page backed or kmalloced depending on the requested size. As the result, the last small skb in the GRO packet can be kmalloced.
There are three different locations where this can be fixed:
(1) We could check head_frag in GRO and not allow GROing skbs with different head_frag. However, that would lead to performance regression on normal forward paths with unmodified gso_size, where !head_frag in the last packet is not a problem.
(2) Set a flag in bpf_skb_net_grow and bpf_skb_net_shrink indicating that NETIF_F_SG is undesirable. That would need to eat a bit in sk_buff. Furthermore, that flag can be unset when all skbs on the frag_list are page backed. To retain good performance, bpf_skb_net_grow/shrink would have to walk the frag_list.
(3) Walk the frag_list in skb_segment when determining whether NETIF_F_SG should be cleared. This of course slows things down.
This patch implements (3). To limit the performance impact in skb_segment, the list is walked only for skbs with SKB_GSO_DODGY set that have gso_size changed. Normal paths thus will not hit it.
We could check only the last skb but since we need to walk the whole list anyway, let's stay on the safe side.
--- net/core/skbuff.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-)
net/core/skbuff.c +19 -17
@@ -4010,23 +4010,25 @@ struct sk_buff *skb_segment(struct sk_buff *head_skb,int i =0 ;int pos; -if (list_skb && !list_skb->head_frag &&skb_headlen (list_skb) && - (skb_shinfo (head_skb)->gso_type &SKB_GSO_DODGY )) { -/* gso_size is untrusted, and we have a frag_list with a linear -* non head_frag head. -* -* (we assume checking the first list_skb member suffices; -* i.e if either of the list_skb members have non head_frag -* head, then the first one has too). -* -* If head_skb's headlen does not fit requested gso_size, it -* means that the frag_list members do NOT terminate on exact -* gso_size boundaries. Hence we cannot perform skb_frag_t page -* sharing. Therefore we must fallback to copying the frag_list -* skbs; we do so by disabling SG. -*/ -if (mss !=GSO_BY_FRAGS && mss !=skb_headlen (head_skb)) - features &= ~NETIF_F_SG ; +if ((skb_shinfo (head_skb)->gso_type &SKB_GSO_DODGY ) && + mss !=GSO_BY_FRAGS && mss !=skb_headlen (head_skb)) { +struct sk_buff *check_skb; + +for (check_skb = list_skb; check_skb; check_skb = check_skb->next) { +if (skb_headlen (check_skb) && !check_skb->head_frag) { +/* gso_size is untrusted, and we have a frag_list with +* a linear non head_frag item. +* +* If head_skb's headlen does not fit requested gso_size, +* it means that the frag_list members do NOT terminate +* on exact gso_size boundaries. Hence we cannot perform +* skb_frag_t page sharing. Therefore we must fallback to +* copying the frag_list skbs; we do so by disabling SG. +*/ + features &= ~NETIF_F_SG ; +break ; + } + } }__skb_push (head_skb, doffset);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 24/131 macsec: delete new rxsc when offload fails
In reply to Greg Kroah-HartmanFrom: Sabrina Dubroca <[email protected]>
[ Upstream commit 93a30947821c203d08865c4e17ea181c9668ce52 ]
Currently we get an inconsistent state:
- netlink returns the error to userspace
- the RXSC is installed but not offloaded
Then the device could get confused when we try to add an RXSA, because the RXSC isn't supposed to exist.
--- drivers/net/macsec.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/net/macsec.c +2 -3
@@ -1863,7 +1863,6 @@ static int macsec_add_rxsc(struct sk_buff *skb, struct genl_info *info)struct macsec_rx_sc *rx_sc;struct nlattr *tb_rxsc[MACSEC_RXSC_ATTR_MAX +1 ];struct macsec_secy *secy; -bool was_active;int ret;if (!attrs[MACSEC_ATTR_IFINDEX ])
@@ -1891,7 +1890,6 @@ static int macsec_add_rxsc(struct sk_buff *skb, struct genl_info *info)return PTR_ERR (rx_sc); } - was_active = rx_sc->active;if (tb_rxsc[MACSEC_RXSC_ATTR_ACTIVE ]) rx_sc->active = !!nla_get_u8 (tb_rxsc[MACSEC_RXSC_ATTR_ACTIVE ]);
@@ -1918,7 +1916,8 @@ static int macsec_add_rxsc(struct sk_buff *skb, struct genl_info *info)return 0 ; cleanup: - rx_sc->active = was_active; +del_rx_sc (secy, sci); +free_rx_sc (rx_sc);rtnl_unlock ();return ret; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 25/131 macsec: fix secy->n_rx_sc accounting
In reply to Greg Kroah-HartmanFrom: Sabrina Dubroca <[email protected]>
[ Upstream commit 73a4b31c9d11f98ae3bc5286d5382930adb0e9c7 ]
secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a secy. This is then used by macsec_send_sci to help decide if we should add the SCI to the header or not.
This logic is currently broken when we create a new RXSC and turn it off at creation, as create_rx_sc always sets ->active to true (and immediately uses that to increment n_rx_sc), and only later macsec_add_rxsc sets rx_sc->active.
--- drivers/net/macsec.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/net/macsec.c +8 -6
@@ -1386,7 +1386,8 @@ static struct macsec_rx_sc *del_rx_sc(struct macsec_secy *secy, sci_t sci)return NULL ; } -static struct macsec_rx_sc *create_rx_sc (struct net_device *dev,sci_t sci) +static struct macsec_rx_sc *create_rx_sc (struct net_device *dev,sci_t sci, +bool active) {struct macsec_rx_sc *rx_sc;struct macsec_dev *macsec;
@@ -1410,7 +1411,7 @@ static struct macsec_rx_sc *create_rx_sc(struct net_device *dev, sci_t sci) } rx_sc->sci = sci; - rx_sc->active = true; + rx_sc->active = active;refcount_set (&rx_sc->refcnt,1 ); secy = &macsec_priv (dev)->secy;
@@ -1863,6 +1864,7 @@ static int macsec_add_rxsc(struct sk_buff *skb, struct genl_info *info)struct macsec_rx_sc *rx_sc;struct nlattr *tb_rxsc[MACSEC_RXSC_ATTR_MAX +1 ];struct macsec_secy *secy; +bool active = true;int ret;if (!attrs[MACSEC_ATTR_IFINDEX ])
@@ -1884,15 +1886,15 @@ static int macsec_add_rxsc(struct sk_buff *skb, struct genl_info *info) secy = &macsec_priv (dev)->secy; sci =nla_get_sci (tb_rxsc[MACSEC_RXSC_ATTR_SCI ]); - rx_sc =create_rx_sc (dev, sci); +if (tb_rxsc[MACSEC_RXSC_ATTR_ACTIVE ]) + active =nla_get_u8 (tb_rxsc[MACSEC_RXSC_ATTR_ACTIVE ]); + + rx_sc =create_rx_sc (dev, sci, active);if (IS_ERR (rx_sc)) {rtnl_unlock ();return PTR_ERR (rx_sc); } -if (tb_rxsc[MACSEC_RXSC_ATTR_ACTIVE ]) - rx_sc->active = !!nla_get_u8 (tb_rxsc[MACSEC_RXSC_ATTR_ACTIVE ]); -if (macsec_is_offloaded (netdev_priv (dev))) {const struct macsec_ops *ops;struct macsec_context ctx;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 26/131 macsec: fix detection of RXSCs when toggling offloading
In reply to Greg Kroah-HartmanFrom: Sabrina Dubroca <[email protected]>
[ Upstream commit 80df4706357a5a06bbbc70273bf2611df1ceee04 ]
macsec_is_configured incorrectly uses secy->n_rx_sc to check if some RXSCs exist. secy->n_rx_sc only counts the number of active RXSCs, but there can also be inactive SCs as well, which may be stored in the driver (in case we're disabling offloading), or would have to be pushed to the device (in case we're trying to enable offloading).
As long as RXSCs active on creation and never turned off, the issue is not visible.
--- drivers/net/macsec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/macsec.c +1 -1
@@ -2558,7 +2558,7 @@ static bool macsec_is_configured(struct macsec_dev *macsec)struct macsec_tx_sc *tx_sc = &secy->tx_sc;int i; -if (secy->n_rx_sc >0 ) +if (secy->rx_sc)return true;for (i =0 ; i <MACSEC_NUM_AN ; i++)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 27/131 macsec: clear encryption keys from the stack after setting up offload
In reply to Greg Kroah-HartmanFrom: Sabrina Dubroca <[email protected]>
[ Upstream commit aaab73f8fba4fd38f4d2617440d541a1c334e819 ]
macsec_add_rxsa and macsec_add_txsa copy the key to an on-stack offloading context to pass it to the drivers, but leaves it there when it's done. Clear it with memzero_explicit as soon as it's not needed anymore.
--- drivers/net/macsec.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/macsec.c +2 -0
@@ -1820,6 +1820,7 @@ static int macsec_add_rxsa(struct sk_buff *skb, struct genl_info *info) secy->key_len); err =macsec_offload (ops->mdo_add_rxsa, &ctx); +memzero_explicit (ctx.sa.key, secy->key_len);if (err) goto cleanup; }
@@ -2062,6 +2063,7 @@ static int macsec_add_txsa(struct sk_buff *skb, struct genl_info *info) secy->key_len); err =macsec_offload (ops->mdo_add_txsa, &ctx); +memzero_explicit (ctx.sa.key, secy->key_len);if (err) goto cleanup; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 3/131 fuse: fix readdir cache race
In reply to Greg Kroah-HartmanFrom: Miklos Szeredi <[email protected]>
[ Upstream commit 9fa248c65bdbf5af0a2f74dd38575acfc8dfd2bf ]
There's a race in fuse's readdir cache that can result in an uninitilized page being read. The page lock is supposed to prevent this from happening but in the following case it doesn't:
Two fuse_add_dirent_to_cache() start out and get the same parameters (size=0,offset=0). One of them wins the race to create and lock the page, after which it fills in data, sets rdc.size and unlocks the page.
In the meantime the page gets evicted from the cache before the other instance gets to run. That one also creates the page, but finds the size to be mismatched, bails out and leaves the uninitialized page in the cache.
Fix by marking a filled page uptodate and ignoring non-uptodate pages.
--- fs/fuse/readdir.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
fs/fuse/readdir.c +9 -1
@@ -77,8 +77,10 @@ static void fuse_add_dirent_to_cache(struct file *file, goto unlock; addr =kmap_atomic (page); -if (!offset) +if (!offset) {clear_page (addr); +SetPageUptodate (page); + }memcpy (addr + offset, dirent, reclen);kunmap_atomic (addr); fi->rdc.size = (index <<PAGE_SHIFT ) + offset + reclen;
@@ -516,6 +518,12 @@ static int fuse_readdir_cached(struct file *file, struct dir_context *ctx) page =find_get_page_flags (file->f_mapping, index,FGP_ACCESSED |FGP_LOCK ); +/* Page gone missing, then re-added to cache, but not initialized? */ +if (page && !PageUptodate (page)) { +unlock_page (page); +put_page (page); + page =NULL ; + }spin_lock (&fi->rdc.lock);if (!page) {/*
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 4/131 drm/amdkfd: avoid recursive lock in migrations back to RAM
In reply to Greg Kroah-HartmanFrom: Alex Sierra <[email protected]>
[ Upstream commit a6283010e2907a5576f96b839e1a1c82659f137c ]
[Why]:
When we call hmm_range_fault to map memory after a migration, we don't expect memory to be migrated again as a result of hmm_range_fault. The driver ensures that all memory is in GPU-accessible locations so that no migration should be needed. However, there is one corner case where hmm_range_fault can unexpectedly cause a migration from DEVICE_PRIVATE back to system memory due to a write-fault when a system memory page in the same range was mapped read-only (e.g. COW). Ranges with individual pages in different locations are usually the result of failed page migrations (e.g. page lock contention). The unexpected migration back to system memory causes a deadlock from recursive locking in our driver.
[How]:
Creating a task reference new member under svm_range_list struct. Setting this with "current" reference, right before the hmm_range_fault is called. This member is checked against "current" reference at svm_migrate_to_ram callback function. If equal, the migration will be ignored.
Stable-dep-of: 5b994354af3c ("drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()")
--- drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 5 +++++ drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 1 + drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 2 ++ 3 files changed, 8 insertions(+)
drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +5 -0
@@ -796,6 +796,11 @@ static vm_fault_t svm_migrate_to_ram(struct vm_fault *vmf)pr_debug ("failed find process at fault address 0x%lx\n" , addr);return VM_FAULT_SIGBUS ; } +if (READ_ONCE (p->svms.faulting_task) == current) { +pr_debug ("skipping ram migration\n" ); +kfd_unref_process (p); +return 0 ; + } addr >>=PAGE_SHIFT ;pr_debug ("CPU page fault svms 0x%p address 0x%lx\n" , &p->svms, addr);
drivers/gpu/drm/amd/amdkfd/kfd_priv.h +1 -0
@@ -755,6 +755,7 @@ struct svm_range_list {atomic_t evicted_ranges;struct delayed_work restore_work;DECLARE_BITMAP (bitmap_supported,MAX_GPU_INSTANCE ); +struct task_struct *faulting_task; };/* Process data */
drivers/gpu/drm/amd/amdkfd/kfd_svm.c +2 -0
@@ -1489,9 +1489,11 @@ static int svm_range_validate_and_map(struct mm_struct *mm, next =min (vma->vm_end, end); npages = (next - addr) >>PAGE_SHIFT ; +WRITE_ONCE (p->svms.faulting_task, current); r =amdgpu_hmm_range_get_pages (&prange->notifier, mm,NULL , addr, npages, &hmm_range, readonly, true, owner); +WRITE_ONCE (p->svms.faulting_task,NULL );if (r) {pr_debug ("failed %d to get svm range pages\n" , r); goto unreserve_out;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 5/131 drm/amdkfd: handle CPU fault on COW mapping
In reply to Greg Kroah-HartmanFrom: Philip Yang <[email protected]>
[ Upstream commit e1f84eef313f4820cca068a238c645d0a38c6a9b ]
If CPU page fault in a page with zone_device_data svm_bo from another process, that means it is COW mapping in the child process and the range is migrated to VRAM by parent process. Migrate the parent process range back to system memory to recover the CPU page fault.
Stable-dep-of: 5b994354af3c ("drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()")
--- drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 42 ++++++++++++++++-------- 1 file changed, 29 insertions(+), 13 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +29 -13
@@ -780,7 +780,7 @@ svm_migrate_to_vram(struct svm_range *prange, uint32_t best_loc,static vm_fault_t svm_migrate_to_ram (struct vm_fault *vmf) {unsigned long addr = vmf->address; -struct vm_area_struct *vma; +struct svm_range_bo *svm_bo;enum svm_work_list_ops op;struct svm_range *parent;struct svm_range *prange;
@@ -788,29 +788,42 @@ static vm_fault_t svm_migrate_to_ram(struct vm_fault *vmf)struct mm_struct *mm;int r =0 ; - vma = vmf->vma; - mm = vma->vm_mm; + svm_bo = vmf->page->zone_device_data; +if (!svm_bo) { +pr_debug ("failed get device page at addr 0x%lx\n" , addr); +return VM_FAULT_SIGBUS ; + } +if (!mmget_not_zero (svm_bo->eviction_fence->mm)) { +pr_debug ("addr 0x%lx of process mm is detroyed\n" , addr); +return VM_FAULT_SIGBUS ; + } + + mm = svm_bo->eviction_fence->mm; +if (mm != vmf->vma->vm_mm) +pr_debug ("addr 0x%lx is COW mapping in child process\n" , addr); - p =kfd_lookup_process_by_mm (vma->vm_mm); + p =kfd_lookup_process_by_mm (mm);if (!p) {pr_debug ("failed find process at fault address 0x%lx\n" , addr); -return VM_FAULT_SIGBUS ; + r =VM_FAULT_SIGBUS ; + goto out_mmput; }if (READ_ONCE (p->svms.faulting_task) == current) {pr_debug ("skipping ram migration\n" ); -kfd_unref_process (p); -return 0 ; + r =0 ; + goto out_unref_process; } - addr >>=PAGE_SHIFT ; +pr_debug ("CPU page fault svms 0x%p address 0x%lx\n" , &p->svms, addr); + addr >>=PAGE_SHIFT ;mutex_lock (&p->svms.lock); prange =svm_range_from_addr (&p->svms, addr, &parent);if (!prange) { -pr_debug ("cannot find svm range at 0x%lx\n" , addr); +pr_debug ("failed get range svms 0x%p addr 0x%lx\n" , &p->svms, addr); r = -EFAULT ; - goto out; + goto out_unlock_svms; }mutex_lock (&parent->migrate_mutex);
@@ -834,8 +847,8 @@ static vm_fault_t svm_migrate_to_ram(struct vm_fault *vmf) r =svm_migrate_vram_to_ram (prange, mm);if (r) -pr_debug ("failed %d migrate 0x%p [0x%lx 0x%lx] to ram\n" , r, - prange, prange->start, prange->last); +pr_debug ("failed %d migrate svms 0x%p range 0x%p [0x%lx 0x%lx]\n" , + r, prange->svms, prange, prange->start, prange->last);/* xnack on, update mapping on GPUs with ACCESS_IN_PLACE */ if (p->xnack_enabled && parent == prange)
@@ -849,9 +862,12 @@ static vm_fault_t svm_migrate_to_ram(struct vm_fault *vmf)if (prange != parent)mutex_unlock (&prange->migrate_mutex);mutex_unlock (&parent->migrate_mutex); -out: +out_unlock_svms:mutex_unlock (&p->svms.lock); +out_unref_process:kfd_unref_process (p); +out_mmput: +mmput (mm);pr_debug ("CPU fault svms 0x%p address 0x%lx done\n" , &p->svms, addr);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 6/131 drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
In reply to Greg Kroah-HartmanFrom: Yang Li <[email protected]>
[ Upstream commit 5b994354af3cab770bf13386469c5725713679af ]
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced.
--- drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +1 -3
@@ -865,12 +865,10 @@ static vm_fault_t svm_migrate_to_ram(struct vm_fault *vmf) out_unlock_svms:mutex_unlock (&p->svms.lock); out_unref_process: +pr_debug ("CPU fault svms 0x%p address 0x%lx done\n" , &p->svms, addr);kfd_unref_process (p); out_mmput:mmput (mm); - -pr_debug ("CPU fault svms 0x%p address 0x%lx done\n" , &p->svms, addr); -return r ?VM_FAULT_SIGBUS :0 ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 7/131 hwspinlock: qcom: correct MMIO max register for newer SoCs
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 90cb380f9ceb811059340d06ff5fd0c0e93ecbe1 ]
Newer ARMv8 Qualcomm SoCs using 0x1000 register stride have maximum register 0x20000 (32 mutexes * 0x1000).
--- drivers/hwspinlock/qcom_hwspinlock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwspinlock/qcom_hwspinlock.c +1 -1
@@ -105,7 +105,7 @@ static const struct regmap_config tcsr_mutex_config = { .reg_bits = 32, .reg_stride = 4, .val_bits = 32, - .max_register = 0x40000, + .max_register = 0x20000, .fast_io = true, };
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 8/131 phy: stm32: fix an error code in probe
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
[ Upstream commit ca1c73628f5bd0c1ef6e46073cc3be2450605b06 ]
If "index > usbphyc->nphys" is true then this returns success but it should return -EINVAL.
--- drivers/phy/st/phy-stm32-usbphyc.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/phy/st/phy-stm32-usbphyc.c +2 -0
@@ -532,6 +532,8 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) ret =of_property_read_u32 (child,"reg" , &index);if (ret || index > usbphyc->nphys) {dev_err (&phy->dev,"invalid reg property: %d\n" , ret); +if (!ret) + ret = -EINVAL ; goto put_child; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 9/131 wifi: cfg80211: silence a sparse RCU warning
In reply to Greg Kroah-HartmanFrom: Johannes Berg <[email protected]>
[ Upstream commit 03c0ad4b06c3566de624b4f4b78ac1a5d1e4c8e7 ]
All we're going to do with this pointer is assign it to another __rcu pointer, but sparse can't see that, so use rcu_access_pointer() to silence the warning here.
--- net/wireless/scan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
net/wireless/scan.c +3 -1
@@ -1676,7 +1676,9 @@ cfg80211_update_known_bss(struct cfg80211_registered_device *rdev,if (old ==rcu_access_pointer (known->pub.ies))rcu_assign_pointer (known->pub.ies, new->pub.beacon_ies); -cfg80211_update_hidden_bsses (known, new->pub.beacon_ies, old); +cfg80211_update_hidden_bsses (known, +rcu_access_pointer (new->pub.beacon_ies), + old);if (old)kfree_rcu ((struct cfg80211_bss_ies *)old, rcu_head);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainercover 5.15.79-rc1 review
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.79-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.15.79-rc1
Eric Dumazet <[email protected]>
net: tun: call napi_schedule_prep() to ensure we own a napi
Philip Yang <[email protected]>
drm/amdkfd: Migrate in CPU page fault use current mm
Anders Roxell <[email protected]>
marvell: octeontx2: build error: unknown type name 'u64'
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Check return code of dma_async_device_register
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Fix impossible condition
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Don't allow CPU to reorder channel enable
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Fix completion of unissued descriptor in case of errors
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Fix descriptor handling when issuing it to hardware
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Fix concurrency over the active list
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Free the memset buf without holding the chan lock
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Fix concurrency over descriptor
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Fix concurrency problems by removing atc_complete_all()
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Protect atchan->status with the channel lock
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Do not call the complete callback on device_terminate_all
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Fix premature completion of desc in issue_pending
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Start transfer for cyclic channels in issue_pending
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Don't start transactions at tx_submit level
Tudor Ambarus <[email protected]>
dmaengine: at_hdmac: Fix at_lli struct definition
Linus Torvalds <[email protected]>
cert host tools: Stop complaining about deprecated OpenSSL functions
Oliver Hartkopp <[email protected]>
can: j1939: j1939_send_one(): fix missing CAN header initialization
Peter Xu <[email protected]>
mm/shmem: use page_mapping() to detect page cache for uffd continue
Pankaj Gupta <[email protected]>
mm/memremap.c: map FS_DAX device memory as decrypted
SeongJae Park <[email protected]>
mm/damon/dbgfs: check if rm_contexts input is for a real context
ZhangPeng <[email protected]>
udf: Fix a slab-out-of-bounds write bug in udf_find_entry()
Brian Norris <[email protected]>
mms: sdhci-esdhc-imx: Fix SDHCI_RESET_ALL for CQHCI
Johannes Thumshirn <[email protected]>
btrfs: zoned: initialize device's zone info for seeding
Zhang Xiaoxu <[email protected]>
btrfs: selftests: fix wrong error check in btrfs_free_dummy_root()
Liu Shixin <[email protected]>
btrfs: fix match incorrectly in dev_args_match_device
Wen Gong <[email protected]>
wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()
Jorge Lopez <[email protected]>
platform/x86: hp_wmi: Fix rfkill causing soft blocked wifi
Guchun Chen <[email protected]>
drm/amdgpu: disable BACO on special BEIGE_GOBY card
Matthew Auld <[email protected]>
drm/i915/dmabuf: fix sg_table handling in map_dma_buf
Ryusuke Konishi <[email protected]>
nilfs2: fix use-after-free bug of ns_writer on remount
Ryusuke Konishi <[email protected]>
nilfs2: fix deadlock in nilfs_count_free_blocks()
Shin'ichiro Kawasaki <[email protected]>
ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure
Nathan Chancellor <[email protected]>
vmlinux.lds.h: Fix placement of '.data..decrypted' section
Jussi Laako <[email protected]>
ALSA: usb-audio: Add DSD support for Accuphase DAC-60
Takashi Iwai <[email protected]>
ALSA: usb-audio: Add quirk entry for M-Audio Micro
Takashi Iwai <[email protected]>
ALSA: usb-audio: Yet more regression for for the delayed card registration
Edson Juliano Drosdeck <[email protected]>
ALSA: hda/realtek: Add Positivo C6300 model quirk
Ye Bin <[email protected]>
ALSA: hda: fix potential memleak in 'add_widget_node'
Xian Wang <[email protected]>
ALSA: hda/ca0132: add quirk for EVGA Z390 DARK
Evan Quan <[email protected]>
ALSA: hda/hdmi - enable runtime pm for more AMD display audio
Haibo Chen <[email protected]>
mmc: sdhci-esdhc-imx: use the correct host caps for MMC_CAP_8_BIT_DATA
Brian Norris <[email protected]>
mmc: sdhci-tegra: Fix SDHCI_RESET_ALL for CQHCI
Brian Norris <[email protected]>
mmc: sdhci_am654: Fix SDHCI_RESET_ALL for CQHCI
Brian Norris <[email protected]>
mmc: sdhci-of-arasan: Fix SDHCI_RESET_ALL for CQHCI
Brian Norris <[email protected]>
mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI
Jiaxun Yang <[email protected]>
MIPS: jump_label: Fix compat branch range check
Ard Biesheuvel <[email protected]>
arm64: efi: Fix handling of misaligned runtime regions and drop warning
Conor Dooley <[email protected]>
riscv: fix reserved memory setup
Jisheng Zhang <[email protected]>
riscv: vdso: fix build with llvm
Jisheng Zhang <[email protected]>
riscv: process: fix kernel info leakage
Chuang Wang <[email protected]>
net: macvlan: fix memory leaks of macvlan_common_newlink
Zhengchao Shao <[email protected]>
ethernet: tundra: free irq when alloc ring failed in tsi108_open()
Zhengchao Shao <[email protected]>
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
Zhengchao Shao <[email protected]>
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
Antoine Tenart <[email protected]>
net: atlantic: macsec: clear encryption keys from the stack
Antoine Tenart <[email protected]>
net: phy: mscc: macsec: clear encryption keys when freeing a flow
Yang Yingliang <[email protected]>
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
Yang Yingliang <[email protected]>
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
Yang Yingliang <[email protected]>
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
Zhengchao Shao <[email protected]>
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
Wei Yongjun <[email protected]>
mctp: Fix an error handling path in mctp_init()
Tan, Tee Min <[email protected]>
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
Wong Vee Khee <[email protected]>
stmmac: intel: Enable 2.5Gbps for Intel AlderLake-S
Zhengchao Shao <[email protected]>
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
Zhengchao Shao <[email protected]>
net: cpsw: disable napi in cpsw_ndo_open()
Roi Dayan <[email protected]>
net/mlx5e: E-Switch, Fix comparing termination table instance
Roy Novich <[email protected]>
net/mlx5: Allow async trigger completion execution on single CPU systems
Vlad Buslov <[email protected]>
net/mlx5: Bridge, verify LAG state when adding bond to bridge
M Chetan Kumar <[email protected]>
net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg
Zhengchao Shao <[email protected]>
net: nixge: disable napi when enable interrupts failed in nixge_open()
Zhengchao Shao <[email protected]>
net: marvell: prestera: fix memory leak in prestera_rxtx_switch_init()
Shigeru Yoshida <[email protected]>
netfilter: Cleanup nft_net->module_list from nf_tables_exit_net()
Ziyang Xuan <[email protected]>
netfilter: nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Donglin Peng <[email protected]>
perf tools: Add the include/perf/ directory to .gitignore
Athira Rajeev <[email protected]>
perf stat: Fix printing os->prefix in CSV metrics output
Zhengchao Shao <[email protected]>
drivers: net: xgene: disable napi when register irq failed in xgene_enet_open()
Zhengchao Shao <[email protected]>
net: ethernet: mtk-star-emac: disable napi when connect and start PHY failed in mtk_star_enable()
Zhengchao Shao <[email protected]>
net: lapbether: fix issue of invalid opcode in lapbeth_open()
Yang Yingliang <[email protected]>
dmaengine: ti: k3-udma-glue: fix memory leak when register device fail
Christophe JAILLET <[email protected]>
dmaengine: mv_xor_v2: Fix a resource leak in mv_xor_v2_remove()
Doug Brown <[email protected]>
dmaengine: pxa_dma: use platform_get_irq_optional
Xin Long <[email protected]>
tipc: fix the msg->req tlv len check in tipc_nl_compat_name_table_dump_header
YueHaibing <[email protected]>
net: broadcom: Fix BCMGENET Kconfig
Rasmus Villemoes <[email protected]>
net: stmmac: dwmac-meson8b: fix meson8b_devm_clk_prepare_enable()
Zhengchao Shao <[email protected]>
can: af_can: fix NULL pointer dereference in can_rx_register()
Alexander Potapenko <[email protected]>
ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network
Lu Wei <[email protected]>
tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
Yuan Can <[email protected]>
drm/vc4: Fix missing platform_unregister_drivers() call in vc4_drm_register()
HW He <[email protected]>
net: wwan: mhi: fix memory leak in mhi_mbim_dellink
HW He <[email protected]>
net: wwan: iosm: fix memory leak in ipc_wwan_dellink
Zhengchao Shao <[email protected]>
hamradio: fix issue of dev reference count leakage in bpq_device_event()
Zhengchao Shao <[email protected]>
net: lapbether: fix issue of dev reference count leakage in lapbeth_device_event()
Nico Boehr <[email protected]>
KVM: s390: pv: don't allow userspace to set the clock under PV
John Thomson <[email protected]>
phy: ralink: mt7621-pci: add sentinel to quirks table
Gaosheng Cui <[email protected]>
capabilities: fix undefined behavior in bit shift for CAP_TO_MASK
Sean Anderson <[email protected]>
net: fman: Unregister ethernet device on removal
Alex Barba <[email protected]>
bnxt_en: fix potentially incorrect return value for ndo_rx_flow_steer
Michael Chan <[email protected]>
bnxt_en: Fix possible crash in bnxt_hwrm_set_coal()
Wang Yufen <[email protected]>
net: tun: Fix memory leaks of napi_get_frags
Ratheesh Kannoth <[email protected]>
octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]
Geetha sowjanya <[email protected]>
octeontx2-pf: Use hardware register for CQE count
Sabrina Dubroca <[email protected]>
macsec: clear encryption keys from the stack after setting up offload
Sabrina Dubroca <[email protected]>
macsec: fix detection of RXSCs when toggling offloading
Sabrina Dubroca <[email protected]>
macsec: fix secy->n_rx_sc accounting
Sabrina Dubroca <[email protected]>
macsec: delete new rxsc when offload fails
Jiri Benc <[email protected]>
net: gso: fix panic on frag_list with mixed head alloc types
Youlin Li <[email protected]>
bpf: Fix wrong reg type conversion in release_reference()
Kumar Kartikeya Dwivedi <[email protected]>
bpf: Add helper macro bpf_for_each_reg_in_vstate
Cong Wang <[email protected]>
bpf, sock_map: Move cancel_work_sync() out of sock lock
John Fastabend <[email protected]>
bpf: Fix sockmap calling sleepable function in teardown path
Wang Yufen <[email protected]>
bpf, sockmap: Fix sk->sk_forward_alloc warn_on in sk_stream_kill_queues
Yang Yingliang <[email protected]>
HID: hyperv: fix possible memory leak in mousevsc_probe()
Pu Lehui <[email protected]>
bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE
Howard Hsu <[email protected]>
wifi: mac80211: Set TWT Information Frame Disabled bit as 1
Wang Yufen <[email protected]>
bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues
Kees Cook <[email protected]>
bpf, verifier: Fix memory leak in array reallocation for stack state
Srinivas Kandagatla <[email protected]>
soundwire: qcom: check for outanding writes before doing a read
Srinivas Kandagatla <[email protected]>
soundwire: qcom: reinit broadcast completion
Arend van Spriel <[email protected]>
wifi: cfg80211: fix memory leak in query_regdb_file()
Johannes Berg <[email protected]>
wifi: cfg80211: silence a sparse RCU warning
Dan Carpenter <[email protected]>
phy: stm32: fix an error code in probe
Krzysztof Kozlowski <[email protected]>
hwspinlock: qcom: correct MMIO max register for newer SoCs
Yang Li <[email protected]>
drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
Philip Yang <[email protected]>
drm/amdkfd: handle CPU fault on COW mapping
Alex Sierra <[email protected]>
drm/amdkfd: avoid recursive lock in migrations back to RAM
Miklos Szeredi <[email protected]>
fuse: fix readdir cache race
Sanjay R Mehta <[email protected]>
thunderbolt: Add DP OUT resource when DP tunnel is discovered
Mika Westerberg <[email protected]>
thunderbolt: Tear down existing tunnels when resuming from hibernate
-------------
Diffstat:
Documentation/virt/kvm/devices/vm.rst | 3 + Makefile | 4 +- arch/arm64/kernel/efi.c | 52 ++++--- arch/mips/kernel/jump_label.c | 2 +- arch/riscv/kernel/process.c | 2 + arch/riscv/kernel/setup.c | 1 + arch/riscv/kernel/vdso/Makefile | 2 +- arch/riscv/mm/init.c | 1 - arch/s390/kvm/kvm-s390.c | 26 ++-- arch/s390/kvm/kvm-s390.h | 1 - drivers/ata/libata-scsi.c | 3 + drivers/dma/at_hdmac.c | 153 ++++++++------------- drivers/dma/at_hdmac_regs.h | 10 +- drivers/dma/mv_xor_v2.c | 1 + drivers/dma/pxa_dma.c | 4 +- drivers/dma/ti/k3-udma-glue.c | 3 + drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 49 +++++-- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 1 + drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 2 + .../drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 4 +- drivers/gpu/drm/i915/gem/i915_gem_dmabuf.c | 4 +- drivers/gpu/drm/vc4/vc4_drv.c | 7 +- drivers/hid/hid-hyperv.c | 2 +- drivers/hwspinlock/qcom_hwspinlock.c | 2 +- drivers/mmc/host/sdhci-cqhci.h | 24 ++++ drivers/mmc/host/sdhci-esdhc-imx.c | 7 +- drivers/mmc/host/sdhci-of-arasan.c | 3 +- drivers/mmc/host/sdhci-tegra.c | 3 +- drivers/mmc/host/sdhci_am654.c | 7 +- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 4 +- drivers/net/ethernet/aquantia/atlantic/aq_macsec.c | 2 + .../ethernet/aquantia/atlantic/macsec/macsec_api.c | 18 ++- drivers/net/ethernet/broadcom/Kconfig | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 1 + .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 2 +- drivers/net/ethernet/freescale/fman/mac.c | 9 ++ drivers/net/ethernet/marvell/mv643xx_eth.c | 1 + .../ethernet/marvell/octeontx2/nic/otx2_common.c | 3 + .../ethernet/marvell/octeontx2/nic/otx2_common.h | 1 + .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 135 ++++++++++++++---- .../ethernet/marvell/octeontx2/nic/otx2_struct.h | 57 ++++++++ .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.c | 69 +++++++++- .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.h | 5 + .../net/ethernet/marvell/prestera/prestera_rxtx.c | 7 +- drivers/net/ethernet/mediatek/mtk_star_emac.c | 2 + drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 11 +- .../ethernet/mellanox/mlx5/core/en/rep/bridge.c | 31 +++++ .../mellanox/mlx5/core/eswitch_offloads_termtbl.c | 14 +- drivers/net/ethernet/neterion/s2io.c | 29 ++-- drivers/net/ethernet/ni/nixge.c | 1 + drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 14 +- .../net/ethernet/stmicro/stmmac/dwmac-loongson.c | 39 ++++-- .../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 8 +- drivers/net/ethernet/ti/cpsw.c | 2 + drivers/net/ethernet/tundra/tsi108_eth.c | 5 +- drivers/net/hamradio/bpqether.c | 2 +- drivers/net/macsec.c | 23 ++-- drivers/net/macvlan.c | 4 +- drivers/net/phy/mscc/mscc_macsec.c | 1 + drivers/net/tun.c | 18 ++- drivers/net/wan/lapbether.c | 3 +- drivers/net/wireless/ath/ath11k/reg.c | 6 +- drivers/net/wwan/iosm/iosm_ipc_pcie.c | 11 +- drivers/net/wwan/iosm/iosm_ipc_wwan.c | 1 + drivers/net/wwan/mhi_wwan_mbim.c | 1 + drivers/phy/ralink/phy-mt7621-pci.c | 3 +- drivers/phy/st/phy-stm32-usbphyc.c | 2 + drivers/platform/x86/hp-wmi.c | 12 +- drivers/soundwire/qcom.c | 9 ++ drivers/thunderbolt/path.c | 42 +++--- drivers/thunderbolt/tb.c | 96 ++++++++++--- drivers/thunderbolt/tb.h | 5 +- drivers/thunderbolt/tunnel.c | 27 ++-- drivers/thunderbolt/tunnel.h | 9 +- fs/btrfs/disk-io.c | 4 +- fs/btrfs/tests/btrfs-tests.c | 2 +- fs/btrfs/volumes.c | 27 ++-- fs/btrfs/volumes.h | 2 +- fs/fuse/readdir.c | 10 +- fs/nilfs2/segment.c | 15 +- fs/nilfs2/super.c | 2 - fs/nilfs2/the_nilfs.c | 2 - fs/udf/namei.c | 2 +- include/asm-generic/vmlinux.lds.h | 2 +- include/linux/bpf.h | 1 + include/linux/bpf_verifier.h | 21 +++ include/linux/skmsg.h | 3 +- include/linux/soc/marvell/octeontx2/asm.h | 15 ++ include/uapi/linux/capability.h | 2 +- kernel/bpf/verifier.c | 148 ++++++-------------- mm/damon/dbgfs.c | 7 + mm/memremap.c | 1 + mm/userfaultfd.c | 2 +- net/can/af_can.c | 2 +- net/can/j1939/main.c | 3 + net/core/skbuff.c | 36 ++--- net/core/skmsg.c | 8 +- net/core/sock_map.c | 28 +++- net/ipv4/tcp.c | 2 +- net/ipv4/tcp_bpf.c | 9 +- net/ipv6/addrlabel.c | 1 + net/mac80211/s1g.c | 3 + net/mctp/af_mctp.c | 4 +- net/mctp/route.c | 2 +- net/netfilter/nf_tables_api.c | 3 +- net/netfilter/nfnetlink.c | 1 + net/tipc/netlink_compat.c | 2 +- net/wireless/reg.c | 12 +- net/wireless/scan.c | 4 +- scripts/extract-cert.c | 7 + scripts/sign-file.c | 7 + sound/hda/hdac_sysfs.c | 4 +- sound/pci/hda/hda_intel.c | 3 + sound/pci/hda/patch_ca0132.c | 1 + sound/pci/hda/patch_realtek.c | 1 + sound/usb/card.c | 29 ++-- sound/usb/quirks-table.h | 4 + sound/usb/quirks.c | 1 + tools/bpf/bpftool/common.c | 3 + tools/perf/.gitignore | 1 + tools/perf/util/stat-display.c | 2 +- 123 files changed, 1074 insertions(+), 511 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 29/131 octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]
From: Ratheesh Kannoth <[email protected]>
[ Upstream commit 51afe9026d0c63263abe9840e629f118d7405b36 ]
In scenarios where multiple errors have occurred for a SQ before SW starts handling error interrupt, SQ_CTX[OP_INT] may get overwritten leading to NIX_LF_SQ_OP_INT returning incorrect value.
To workaround this read LMT, MNQ and SQ individual error status registers to determine the cause of error.
--- .../ethernet/marvell/octeontx2/nic/otx2_pf.c | 135 ++++++++++++++---- .../marvell/octeontx2/nic/otx2_struct.h | 57 ++++++++ 2 files changed, 162 insertions(+), 30 deletions(-)
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +105 -30
@@ -13,6 +13,7 @@#include <linux/if_vlan.h> #include <linux/iommu.h> #include <net/ip.h> +#include <linux/bitfield.h> #include "otx2_reg.h" #include "otx2_common.h"
@@ -1153,6 +1154,59 @@ int otx2_set_real_num_queues(struct net_device *netdev, }EXPORT_SYMBOL (otx2_set_real_num_queues); +static char *nix_sqoperr_e_str[NIX_SQOPERR_MAX ] = { +"NIX_SQOPERR_OOR" , +"NIX_SQOPERR_CTX_FAULT" , +"NIX_SQOPERR_CTX_POISON" , +"NIX_SQOPERR_DISABLED" , +"NIX_SQOPERR_SIZE_ERR" , +"NIX_SQOPERR_OFLOW" , +"NIX_SQOPERR_SQB_NULL" , +"NIX_SQOPERR_SQB_FAULT" , +"NIX_SQOPERR_SQE_SZ_ZERO" , +}; + +static char *nix_mnqerr_e_str[NIX_MNQERR_MAX ] = { +"NIX_MNQERR_SQ_CTX_FAULT" , +"NIX_MNQERR_SQ_CTX_POISON" , +"NIX_MNQERR_SQB_FAULT" , +"NIX_MNQERR_SQB_POISON" , +"NIX_MNQERR_TOTAL_ERR" , +"NIX_MNQERR_LSO_ERR" , +"NIX_MNQERR_CQ_QUERY_ERR" , +"NIX_MNQERR_MAX_SQE_SIZE_ERR" , +"NIX_MNQERR_MAXLEN_ERR" , +"NIX_MNQERR_SQE_SIZEM1_ZERO" , +}; + +static char *nix_snd_status_e_str[NIX_SND_STATUS_MAX ] = { +"NIX_SND_STATUS_GOOD" , +"NIX_SND_STATUS_SQ_CTX_FAULT" , +"NIX_SND_STATUS_SQ_CTX_POISON" , +"NIX_SND_STATUS_SQB_FAULT" , +"NIX_SND_STATUS_SQB_POISON" , +"NIX_SND_STATUS_HDR_ERR" , +"NIX_SND_STATUS_EXT_ERR" , +"NIX_SND_STATUS_JUMP_FAULT" , +"NIX_SND_STATUS_JUMP_POISON" , +"NIX_SND_STATUS_CRC_ERR" , +"NIX_SND_STATUS_IMM_ERR" , +"NIX_SND_STATUS_SG_ERR" , +"NIX_SND_STATUS_MEM_ERR" , +"NIX_SND_STATUS_INVALID_SUBDC" , +"NIX_SND_STATUS_SUBDC_ORDER_ERR" , +"NIX_SND_STATUS_DATA_FAULT" , +"NIX_SND_STATUS_DATA_POISON" , +"NIX_SND_STATUS_NPC_DROP_ACTION" , +"NIX_SND_STATUS_LOCK_VIOL" , +"NIX_SND_STATUS_NPC_UCAST_CHAN_ERR" , +"NIX_SND_STATUS_NPC_MCAST_CHAN_ERR" , +"NIX_SND_STATUS_NPC_MCAST_ABORT" , +"NIX_SND_STATUS_NPC_VTAG_PTR_ERR" , +"NIX_SND_STATUS_NPC_VTAG_SIZE_ERR" , +"NIX_SND_STATUS_SEND_STATS_ERR" , +}; +static irqreturn_t otx2_q_intr_handler (int irq,void *data) {struct otx2_nic *pf = data;
@@ -1186,46 +1240,67 @@ static irqreturn_t otx2_q_intr_handler(int irq, void *data)/* SQ */ for (qidx =0 ; qidx < pf->hw.tx_queues; qidx++) { +u64 sq_op_err_dbg, mnq_err_dbg, snd_err_dbg; +u8 sq_op_err_code, mnq_err_code, snd_err_code; + +/* Below debug registers captures first errors corresponding to +* those registers. We don't have to check against SQ qid as +* these are fatal errors. +*/ + ptr =otx2_get_regaddr (pf,NIX_LF_SQ_OP_INT ); val =otx2_atomic64_add ((qidx <<44 ), ptr);otx2_write64 (pf,NIX_LF_SQ_OP_INT , (qidx <<44 ) | (val &NIX_SQINT_BITS )); -if (!(val & (NIX_SQINT_BITS |BIT_ULL (42 )))) -continue ; -if (val &BIT_ULL (42 )) {netdev_err (pf->netdev,"SQ%lld: error reading NIX_LF_SQ_OP_INT, NIX_LF_ERR_INT 0x%llx\n" , qidx,otx2_read64 (pf,NIX_LF_ERR_INT )); - }else { -if (val &BIT_ULL (NIX_SQINT_LMT_ERR )) { -netdev_err (pf->netdev,"SQ%lld: LMT store error NIX_LF_SQ_OP_ERR_DBG:0x%llx" , - qidx, -otx2_read64 (pf, -NIX_LF_SQ_OP_ERR_DBG )); -otx2_write64 (pf,NIX_LF_SQ_OP_ERR_DBG , -BIT_ULL (44 )); - } -if (val &BIT_ULL (NIX_SQINT_MNQ_ERR )) { -netdev_err (pf->netdev,"SQ%lld: Meta-descriptor enqueue error NIX_LF_MNQ_ERR_DGB:0x%llx\n" , - qidx, -otx2_read64 (pf,NIX_LF_MNQ_ERR_DBG )); -otx2_write64 (pf,NIX_LF_MNQ_ERR_DBG , -BIT_ULL (44 )); - } -if (val &BIT_ULL (NIX_SQINT_SEND_ERR )) { -netdev_err (pf->netdev,"SQ%lld: Send error, NIX_LF_SEND_ERR_DBG 0x%llx" , - qidx, -otx2_read64 (pf, -NIX_LF_SEND_ERR_DBG )); -otx2_write64 (pf,NIX_LF_SEND_ERR_DBG , -BIT_ULL (44 )); - } -if (val &BIT_ULL (NIX_SQINT_SQB_ALLOC_FAIL )) -netdev_err (pf->netdev,"SQ%lld: SQB allocation failed" , - qidx); + goto done; } + sq_op_err_dbg =otx2_read64 (pf,NIX_LF_SQ_OP_ERR_DBG ); +if (!(sq_op_err_dbg &BIT (44 ))) + goto chk_mnq_err_dbg; + + sq_op_err_code =FIELD_GET (GENMASK (7 ,0 ), sq_op_err_dbg); +netdev_err (pf->netdev,"SQ%lld: NIX_LF_SQ_OP_ERR_DBG(%llx) err=%s\n" , + qidx, sq_op_err_dbg, nix_sqoperr_e_str[sq_op_err_code]); + +otx2_write64 (pf,NIX_LF_SQ_OP_ERR_DBG ,BIT_ULL (44 )); + +if (sq_op_err_code ==NIX_SQOPERR_SQB_NULL ) + goto chk_mnq_err_dbg; + +/* Err is not NIX_SQOPERR_SQB_NULL, call aq function to read SQ structure. +* TODO: But we are in irq context. How to call mbox functions which does sleep +*/ + +chk_mnq_err_dbg: + mnq_err_dbg =otx2_read64 (pf,NIX_LF_MNQ_ERR_DBG ); +if (!(mnq_err_dbg &BIT (44 ))) + goto chk_snd_err_dbg; + + mnq_err_code =FIELD_GET (GENMASK (7 ,0 ), mnq_err_dbg); +netdev_err (pf->netdev,"SQ%lld: NIX_LF_MNQ_ERR_DBG(%llx) err=%s\n" , + qidx, mnq_err_dbg, nix_mnqerr_e_str[mnq_err_code]); +otx2_write64 (pf,NIX_LF_MNQ_ERR_DBG ,BIT_ULL (44 )); + +chk_snd_err_dbg: + snd_err_dbg =otx2_read64 (pf,NIX_LF_SEND_ERR_DBG ); +if (snd_err_dbg &BIT (44 )) { + snd_err_code =FIELD_GET (GENMASK (7 ,0 ), snd_err_dbg); +netdev_err (pf->netdev,"SQ%lld: NIX_LF_SND_ERR_DBG:0x%llx err=%s\n" , + qidx, snd_err_dbg, nix_snd_status_e_str[snd_err_code]); +otx2_write64 (pf,NIX_LF_SEND_ERR_DBG ,BIT_ULL (44 )); + } + +done: +/* Print values and reset */ +if (val &BIT_ULL (NIX_SQINT_SQB_ALLOC_FAIL )) +netdev_err (pf->netdev,"SQ%lld: SQB allocation failed" , + qidx); +schedule_work (&pf->reset_task); }
drivers/net/ethernet/marvell/octeontx2/nic/otx2_struct.h +57 -0
61 lines not on this page · raw message
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 38/131 hamradio: fix issue of dev reference count leakage in bpq_device_event()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit 85cbaf032d3cd9f595152625eda5d4ecb1d6d78d ]
When following tests are performed, it will cause dev reference counting leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2
When new bond device is created, the default type of the bond device is ether. And the bond device is up, bpq_device_event() receives the message and creates a new bpq device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, bpq_device_event() will not put the dev reference count.
--- drivers/net/hamradio/bpqether.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/hamradio/bpqether.c +1 -1
@@ -534,7 +534,7 @@ static int bpq_device_event(struct notifier_block *this,if (!net_eq (dev_net (dev), &init_net))return NOTIFY_DONE ; -if (!dev_is_ethdev (dev)) +if (!dev_is_ethdev (dev) && !bpq_get_ax25_dev (dev))return NOTIFY_DONE ;switch (event) {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 39/131 net: wwan: iosm: fix memory leak in ipc_wwan_dellink
In reply to Greg Kroah-HartmanFrom: HW He <[email protected]>
[ Upstream commit f25caaca424703d5a0607310f0452f978f1f78d9 ]
IOSM driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice().
--- drivers/net/wwan/iosm/iosm_ipc_wwan.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wwan/iosm/iosm_ipc_wwan.c +1 -0
@@ -167,6 +167,7 @@ static void ipc_wwan_setup(struct net_device *iosm_dev) iosm_dev->max_mtu =ETH_MAX_MTU ; iosm_dev->flags =IFF_POINTOPOINT |IFF_NOARP ; + iosm_dev->needs_free_netdev = true; iosm_dev->netdev_ops = &ipc_inm_ops; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 40/131 net: wwan: mhi: fix memory leak in mhi_mbim_dellink
In reply to Greg Kroah-HartmanFrom: HW He <[email protected]>
[ Upstream commit 668205b9c9f94d5ed6ab00cce9a46a654c2b5d16 ]
MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice().
--- drivers/net/wwan/mhi_wwan_mbim.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wwan/mhi_wwan_mbim.c +1 -0
@@ -582,6 +582,7 @@ static void mhi_mbim_setup(struct net_device *ndev) ndev->min_mtu =ETH_MIN_MTU ; ndev->max_mtu =MHI_MAX_BUF_SZ - ndev->needed_headroom; ndev->tx_queue_len =1000 ; + ndev->needs_free_netdev = true; }static const struct wwan_ops mhi_mbim_wwan_ops = {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 41/131 drm/vc4: Fix missing platform_unregister_drivers() call in vc4_drm_register()
In reply to Greg Kroah-HartmanFrom: Yuan Can <[email protected]>
[ Upstream commit cf53db768a8790fdaae2fa3a81322b080285f7e5 ]
A problem about modprobe vc4 failed is triggered with the following log given:
[ 420.327987] Error: Driver 'vc4_hvs' is already registered, aborting... [ 420.333904] failed to register platform driver vc4_hvs_driver [vc4]: -16 modprobe: ERROR: could not insert 'vc4': Device or resource busy
The reason is that vc4_drm_register() returns platform_driver_register() directly without checking its return value, if platform_driver_register() fails, it returns without unregistering all the vc4 drivers, resulting the vc4 can never be installed later.
A simple call graph is shown as below:
vc4_drm_register()
platform_register_drivers() # all vc4 drivers are registered platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without unregister drivers
Fixing this problem by checking the return value of platform_driver_register() and do platform_unregister_drivers() if error happened.
--- drivers/gpu/drm/vc4/vc4_drv.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_drv.c +6 -1
@@ -383,7 +383,12 @@ static int __init vc4_drm_register(void)if (ret)return ret; -return platform_driver_register (&vc4_platform_driver); + ret =platform_driver_register (&vc4_platform_driver); +if (ret) +platform_unregister_drivers (component_drivers, +ARRAY_SIZE (component_drivers)); + +return ret; } static void __exit vc4_drm_unregister(void)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 42/131 tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
In reply to Greg Kroah-HartmanFrom: Lu Wei <[email protected]>
[ Upstream commit 0c175da7b0378445f5ef53904247cfbfb87e0b78 ]
If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code of TCPOPT_SACK_PERM is called to enable sack after data is sent and dupacks are received , it will trigger a warning in function tcp_verify_left_out() as follows:
============================================
WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132 tcp_timeout_mark_lost+0x154/0x160 tcp_enter_loss+0x2b/0x290 tcp_retransmit_timer+0x50b/0x640 tcp_write_timer_handler+0x1c8/0x340 tcp_write_timer+0xe5/0x140 call_timer_fn+0x3a/0x1b0 __run_timers.part.0+0x1bf/0x2d0 run_timer_softirq+0x43/0xb0 __do_softirq+0xfd/0x373 __irq_exit_rcu+0xf6/0x140
The warning is caused in the following steps:
1. a socket named socketA is created
2. socketA enters repair mode without build a connection
3. socketA calls connect() and its state is changed to TCP_ESTABLISHED directly
4. socketA leaves repair mode
5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup ack receives) increase
6. socketA enters repair mode again
7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack
8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out increases
9. sack_outs + lost_out > packets_out triggers since lost_out and sack_outs increase repeatly
In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if Step7 not happen and the warning will not be triggered. As suggested by Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was already sent.
socket-tcp tests in CRIU has been tested as follows:
$ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp* --keep-going \
--ignore-taintsocket-tcp* represent all socket-tcp tests in test/zdtm/static/.
--- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/tcp.c +1 -1
@@ -3536,7 +3536,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level, int optname,case TCP_REPAIR_OPTIONS :if (!tp->repair) err = -EINVAL ; -else if (sk->sk_state ==TCP_ESTABLISHED ) +else if (sk->sk_state ==TCP_ESTABLISHED && !tp->bytes_sent) err =tcp_repair_options_est (sk, optval, optlen);else err = -EPERM ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 43/131 ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network
In reply to Greg Kroah-HartmanFrom: Alexander Potapenko <[email protected]>
[ Upstream commit c23fb2c82267638f9d206cb96bb93e1f93ad7828 ]
When copying a struct ifaddrlblmsg to the network, __ifal_reserved remained uninitialized, resulting in a 1-byte infoleak:
BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841 __netdev_start_xmit ./include/linux/netdevice.h:4841 netdev_start_xmit ./include/linux/netdevice.h:4857 xmit_one net/core/dev.c:3590 dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606 __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256 dev_queue_xmit ./include/linux/netdevice.h:3009 __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1263 netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272 netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360 nlmsg_unicast ./include/net/netlink.h:1061 rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758 ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 ... Uninit was created at: slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742 slab_alloc_node mm/slub.c:3398 __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437 __do_kmalloc_node mm/slab_common.c:954 __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975 kmalloc_reserve net/core/skbuff.c:437 __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509 alloc_skb ./include/linux/skbuff.h:1267 nlmsg_new ./include/net/netlink.h:964 ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540 rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921 ...
This patch ensures that the reserved field is always initialized.
--- net/ipv6/addrlabel.c | 1 + 1 file changed, 1 insertion(+)
net/ipv6/addrlabel.c +1 -0
@@ -437,6 +437,7 @@ static void ip6addrlbl_putmsg(struct nlmsghdr *nlh, {struct ifaddrlblmsg *ifal =nlmsg_data (nlh); ifal->ifal_family =AF_INET6 ; + ifal->__ifal_reserved =0 ; ifal->ifal_prefixlen = prefixlen; ifal->ifal_flags =0 ; ifal->ifal_index = ifindex;
Signature · 1 line
2.35.1
syzbot
syzbotRe: [PATCH 5.15 043/131] ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network
I see the command but can't find the corresponding bug. The email is sent to [email protected] address but the HASH does not correspond to any known bug. Please double check the…
Quoted 73 lines
From: Alexander Potapenko <[email protected]>
[ Upstream commit
c23fb2c82267638f9d206cb96bb93e1f93ad7828]When copying a
struct ifaddrlblmsgto the network,__ifal_reservedremained uninitialized, resulting in a 1-byte infoleak:BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841 __netdev_start_xmit ./include/linux/netdevice.h:4841 netdev_start_xmit ./include/linux/netdevice.h:4857 xmit_one net/core/dev.c:3590 dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606 __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256 dev_queue_xmit ./include/linux/netdevice.h:3009 __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1263 netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272 netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360 nlmsg_unicast ./include/net/netlink.h:1061 rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758 ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 ... Uninit was created at: slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742 slab_alloc_node mm/slub.c:3398 __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437 __do_kmalloc_node mm/slab_common.c:954 __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975 kmalloc_reserve net/core/skbuff.c:437 __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509 alloc_skb ./include/linux/skbuff.h:1267 nlmsg_new ./include/net/netlink.h:964 ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540 rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921 ...This patch ensures that the reserved field is always initialized.
Fixes 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.")Signed-off-by Alexander Potapenko <[email protected]>Reviewed-by David Ahern <[email protected]>Signed-off-by David S. Miller <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- net/ipv6/addrlabel.c | 1 + 1 file changed, 1 insertion(+)net/ipv6/addrlabel.c +1
-0@@ -437,6 +437,7 @@ static void ip6addrlbl_putmsg(struct nlmsghdr *nlh, {struct ifaddrlblmsg *ifal =nlmsg_data (nlh); ifal->ifal_family =AF_INET6 ; + ifal->__ifal_reserved =0 ; ifal->ifal_prefixlen = prefixlen; ifal->ifal_flags =0 ; ifal->ifal_index = ifindex;Signature · 1 line
2.35.1
I see the command but can't find the corresponding bug. The email is sent to [email protected] address but the HASH does not correspond to any known bug. Please double check the address.
Greg Kroah-Hartman
maintainerPATCH 44/131 can: af_can: fix NULL pointer dereference in can_rx_register()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit 8aa59e355949442c408408c2d836e561794c40a1 ]
It causes NULL pointer dereference when testing as following:
(a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket.
(b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device).
(c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket.
(d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket.
The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue.
The following is the stack information:
BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>
--- net/can/af_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/can/af_can.c +1 -1
@@ -451,7 +451,7 @@ int can_rx_register(struct net *net, struct net_device *dev, canid_t can_id,/* insert new receiver (dev,canid,mask) -> (func,data) */ -if (dev && dev->type !=ARPHRD_CAN ) +if (dev && (dev->type !=ARPHRD_CAN || !can_get_ml_priv (dev)))return -ENODEV ;if (dev && !net_eq (net,dev_net (dev)))
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 45/131 net: stmmac: dwmac-meson8b: fix meson8b_devm_clk_prepare_enable()
In reply to Greg Kroah-HartmanFrom: Rasmus Villemoes <[email protected]>
[ Upstream commit ed4314f7729714d788698ade4f9905ee5378ebc0 ]
There are two problems with meson8b_devm_clk_prepare_enable(), introduced in commit a54dc4a49045 ("net: stmmac: dwmac-meson8b:
Make the clock enabling code re-usable"):
- It doesn't pass the clk argument, but instead always the rgmii_tx_clk of the device.
- It silently ignores the return value of devm_add_action_or_reset().
The former didn't become an actual bug until another user showed up in the next commit 9308c47640d5 ("net: stmmac: dwmac-meson8b: add support for the RX delay configuration"). The latter means the callers could end up with the clock not actually prepared/enabled.
--- drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c +3 -5
@@ -272,11 +272,9 @@ static int meson8b_devm_clk_prepare_enable(struct meson8b_dwmac *dwmac,if (ret)return ret; -devm_add_action_or_reset (dwmac->dev, - (void (*)(void *))clk_disable_unprepare, - dwmac->rgmii_tx_clk); - -return 0 ; +return devm_add_action_or_reset (dwmac->dev, + (void (*)(void *))clk_disable_unprepare, + clk); }static int meson8b_init_rgmii_delays (struct meson8b_dwmac *dwmac)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 46/131 net: broadcom: Fix BCMGENET Kconfig
In reply to Greg Kroah-HartmanFrom: YueHaibing <[email protected]>
[ Upstream commit 8d820bc9d12b8beebca836cceaf2bbe68216c2f8 ]
While BCMGENET select BROADCOM_PHY as y, but PTP_1588_CLOCK_OPTIONAL is m, kconfig warning and build errors:
WARNING: unmet direct dependencies detected for BROADCOM_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- BCMGENET [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && HAS_IOMEM [=y] && ARCH_BCM2835 [=y]
drivers/net/phy/broadcom.o: In function `bcm54xx_suspend':
broadcom.c:(.text+0x6ac): undefined reference to bcm_ptp_stop' drivers/net/phy/broadcom.o: In function bcm54xx_phy_probe':
broadcom.c:(.text+0x784): undefined reference to bcm_ptp_probe' drivers/net/phy/broadcom.o: In function bcm54xx_config_init':
broadcom.c:(.text+0xd4c): undefined reference to `bcm_ptp_config_init'
--- drivers/net/ethernet/broadcom/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/broadcom/Kconfig +1 -1
@@ -77,7 +77,7 @@ config BCMGENET select BCM7XXX_PHY select MDIO_BCM_UNIMAC select DIMLIB - select BROADCOM_PHY if ARCH_BCM2835 + select BROADCOM_PHY if (ARCH_BCM2835 && PTP_1588_CLOCK_OPTIONAL) help This driver supports the built-in Ethernet MACs found in the Broadcom BCM7xxx Set Top Box family chipset.
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 47/131 tipc: fix the msg->req tlv len check in tipc_nl_compat_name_table_dump_header
In reply to Greg Kroah-HartmanFrom: Xin Long <[email protected]>
[ Upstream commit 1c075b192fe41030457cd4a5f7dea730412bca40 ]
This is a follow-up for commit 974cb0e3e7c9 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump") where it should have type casted sizeof(..) to int to work when TLV_GET_DATA_LEN() returns a negative value.
syzbot reported a call trace because of it:
BUG: KMSAN: uninit-value in ... tipc_nl_compat_name_table_dump+0x841/0xea0 net/tipc/netlink_compat.c:934 __tipc_nl_compat_dumpit+0xab2/0x1320 net/tipc/netlink_compat.c:238 tipc_nl_compat_dumpit+0x991/0xb50 net/tipc/netlink_compat.c:321 tipc_nl_compat_recv+0xb6e/0x1640 net/tipc/netlink_compat.c:1324 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x103f/0x1260 net/netlink/genetlink.c:792 netlink_rcv_skb+0x3a5/0x6c0 net/netlink/af_netlink.c:2501 genl_rcv+0x3c/0x50 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline]
--- net/tipc/netlink_compat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/tipc/netlink_compat.c +1 -1
@@ -880,7 +880,7 @@ static int tipc_nl_compat_name_table_dump_header(struct tipc_nl_compat_msg *msg) }; ntq = (struct tipc_name_table_query *)TLV_DATA (msg->req); -if (TLV_GET_DATA_LEN (msg->req) <sizeof (struct tipc_name_table_query )) +if (TLV_GET_DATA_LEN (msg->req) < (int )sizeof (struct tipc_name_table_query ))return -EINVAL ; depth =ntohl (ntq->depth);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 30/131 net: tun: Fix memory leaks of napi_get_frags
In reply to Greg Kroah-HartmanFrom: Wang Yufen <[email protected]>
[ Upstream commit 1118b2049d77ca0b505775fc1a8d1909cf19a7ec ]
kmemleak reports after running test_progs:
unreferenced object 0xffff8881b1672dc0 (size 232):
comm "test_progs", pid 394388, jiffies 4354712116 (age 841.975s) hex dump (first 32 bytes):
e0 84 d7 a8 81 88 ff ff 80 2c 67 b1 81 88 ff ff .........,g.....
00 40 c5 9b 81 88 ff ff 00 00 00 00 00 00 00 00 .@..............
backtrace:
[<00000000c8f01748>] napi_skb_cache_get+0xd4/0x150
[<0000000041c7fc09>] __napi_build_skb+0x15/0x50
[<00000000431c7079>] __napi_alloc_skb+0x26e/0x540
[<000000003ecfa30e>] napi_get_frags+0x59/0x140
[<0000000099b2199e>] tun_get_user+0x183d/0x3bb0 [tun]
[<000000008a5adef0>] tun_chr_write_iter+0xc0/0x1b1 [tun]
[<0000000049993ff4>] do_iter_readv_writev+0x19f/0x320
[<000000008f338ea2>] do_iter_write+0x135/0x630
[<000000008a3377a4>] vfs_writev+0x12e/0x440
[<00000000a6b5639a>] do_writev+0x104/0x280
[<00000000ccf065d8>] do_syscall_64+0x3b/0x90
[<00000000d776e329>] entry_SYSCALL_64_after_hwframe+0x63/0xcdThe issue occurs in the following scenarios:tun_get_user()
napi_gro_frags()
napi_frags_finish()
case GRO_NORMAL:
gro_normal_one()
list_add_tail(&skb->list, &napi->rx_list);
<-- While napi->rx_count < READ_ONCE(gro_normal_batch),
<-- gro_normal_list() is not called, napi->rx_list is not empty <-- not ask to complete the gro work, will cause memory leaks in <-- following tun_napi_del()
...tun_napi_del()
netif_napi_del()
__netif_napi_del()
<-- &napi->rx_list is not empty, which caused memory leaksTo fix, add napi_complete() after napi_gro_frags().
--- drivers/net/tun.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/tun.c +1 -0
@@ -1959,6 +1959,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,local_bh_disable ();napi_gro_frags (&tfile->napi); +napi_complete (&tfile->napi);local_bh_enable ();mutex_unlock (&tfile->napi_mutex); }else if (tfile->napi_enabled) {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 48/131 dmaengine: pxa_dma: use platform_get_irq_optional
In reply to Greg Kroah-HartmanFrom: Doug Brown <[email protected]>
[ Upstream commit b3d726cb8497c6b12106fd617d46eef11763ea86 ]
The first IRQ is required, but IRQs 1 through (nb_phy_chans - 1) are optional, because on some platforms (e.g. PXA168) there is a single IRQ shared between all channels.
This change inhibits a flood of "IRQ index # not found" messages at startup. Tested on a PXA168-based device.
--- drivers/dma/pxa_dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dma/pxa_dma.c +2 -2
@@ -1248,14 +1248,14 @@ static int pxad_init_phys(struct platform_device *op,return -ENOMEM ;for (i =0 ; i < nb_phy_chans; i++) -if (platform_get_irq (op, i) >0 ) +if (platform_get_irq_optional (op, i) >0 ) nr_irq++;for (i =0 ; i < nb_phy_chans; i++) { phy = &pdev->phys[i]; phy->base = pdev->base; phy->idx = i; - irq =platform_get_irq (op, i); + irq =platform_get_irq_optional (op, i);if ((nr_irq >1 ) && (irq >0 )) ret = devm_request_irq(&op->dev, irq, pxad_chan_handler,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 49/131 dmaengine: mv_xor_v2: Fix a resource leak in mv_xor_v2_remove()
In reply to Greg Kroah-HartmanFrom: Christophe JAILLET <[email protected]>
[ Upstream commit 081195d17a0c4c636da2b869bd5809d42e8cbb13 ]
A clk_prepare_enable() call in the probe is not balanced by a corresponding clk_disable_unprepare() in the remove function.
Add the missing call.
--- drivers/dma/mv_xor_v2.c | 1 + 1 file changed, 1 insertion(+)
drivers/dma/mv_xor_v2.c +1 -0
@@ -899,6 +899,7 @@ static int mv_xor_v2_remove(struct platform_device *pdev)tasklet_kill (&xor_dev->irq_tasklet);clk_disable_unprepare (xor_dev->clk); +clk_disable_unprepare (xor_dev->reg_clk);return 0 ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 50/131 dmaengine: ti: k3-udma-glue: fix memory leak when register device fail
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit ac2b9f34f02052709aea7b34bb2a165e1853eb41 ]
If device_register() fails, it should call put_device() to give up reference, the name allocated in dev_set_name() can be freed in callback function kobject_cleanup().
--- drivers/dma/ti/k3-udma-glue.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/dma/ti/k3-udma-glue.c +3 -0
@@ -299,6 +299,7 @@ struct k3_udma_glue_tx_channel *k3_udma_glue_request_tx_chn(struct device *dev, ret =device_register (&tx_chn->common.chan_dev);if (ret) {dev_err (dev,"Channel Device registration failed %d\n" , ret); +put_device (&tx_chn->common.chan_dev); tx_chn->common.chan_dev.parent =NULL ; goto err; }
@@ -917,6 +918,7 @@ k3_udma_glue_request_rx_chn_priv(struct device *dev, const char *name, ret =device_register (&rx_chn->common.chan_dev);if (ret) {dev_err (dev,"Channel Device registration failed %d\n" , ret); +put_device (&rx_chn->common.chan_dev); rx_chn->common.chan_dev.parent =NULL ; goto err; }
@@ -1048,6 +1050,7 @@ k3_udma_glue_request_remote_rx_chn(struct device *dev, const char *name, ret =device_register (&rx_chn->common.chan_dev);if (ret) {dev_err (dev,"Channel Device registration failed %d\n" , ret); +put_device (&rx_chn->common.chan_dev); rx_chn->common.chan_dev.parent =NULL ; goto err; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 51/131 net: lapbether: fix issue of invalid opcode in lapbeth_open()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit 3faf7e14ec0c3462c2d747fa6793b8645d1391df ]
If lapb_register() failed when lapb device goes to up for the first time, the NAPI is not disabled. As a result, the invalid opcode issue is reported when the lapb device goes to up for the second time.
The stack info is as follows:
[ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442! [ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0 [ 1958.332310][T11356] Call Trace: [ 1958.332817][T11356] <TASK> [ 1958.336135][T11356] lapbeth_open+0x18/0x90 [ 1958.337446][T11356] __dev_open+0x258/0x490 [ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0 [ 1958.345325][T11356] dev_change_flags+0x93/0x160 [ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0 [ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0 [ 1958.349638][T11356] sock_ioctl+0x5d1/0x750 [ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790 [ 1958.365594][T11356] do_syscall_64+0x35/0x80 [ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1958.377381][T11356] </TASK>
--- drivers/net/wan/lapbether.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wan/lapbether.c +1 -0
@@ -325,6 +325,7 @@ static int lapbeth_open(struct net_device *dev) err =lapb_register (dev, &lapbeth_callbacks);if (err !=LAPB_OK ) { +napi_disable (&lapbeth->napi);pr_err ("lapb_register error: %d\n" , err);return -ENODEV ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 52/131 net: ethernet: mtk-star-emac: disable napi when connect and start PHY failed in mtk_star_enable()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit b0c09c7f08c2467b2089bdf4adb2fbbc2464f4a8 ]
When failed to connect to and start PHY in mtk_star_enable() for opening device, napi isn't disabled. When open mtk star device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested.
--- drivers/net/ethernet/mediatek/mtk_star_emac.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/ethernet/mediatek/mtk_star_emac.c +2 -0
@@ -977,6 +977,8 @@ static int mtk_star_enable(struct net_device *ndev)return 0 ; err_free_irq: +napi_disable (&priv->rx_napi); +napi_disable (&priv->tx_napi);free_irq (ndev->irq, ndev); err_free_skbs:mtk_star_free_rx_skbs (priv);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 53/131 drivers: net: xgene: disable napi when register irq failed in xgene_enet_open()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit ce9e57feeed81d17d5e80ed86f516ff0d39c3867 ]
When failed to register irq in xgene_enet_open() for opening device, napi isn't disabled. When open xgene device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested.
--- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/apm/xgene/xgene_enet_main.c +3 -1
@@ -1004,8 +1004,10 @@ static int xgene_enet_open(struct net_device *ndev)xgene_enet_napi_enable (pdata); ret =xgene_enet_register_irq (ndev); -if (ret) +if (ret) { +xgene_enet_napi_disable (pdata);return ret; + }if (ndev->phydev) {phy_start (ndev->phydev);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 54/131 perf stat: Fix printing os->prefix in CSV metrics output
In reply to Greg Kroah-HartmanFrom: Athira Rajeev <[email protected]>
[ Upstream commit ad353b710c7493df3d4fc2d3a51819126bed2e81 ]
'perf stat' with CSV output option prints an extra empty string as first field in metrics output line. Sample output below:
# ./perf stat -x, --per-socket -a -C 1 ls S0,1,1.78,msec,cpu-clock,1785146,100.00,0.973,CPUs utilized S0,1,26,,context-switches,1781750,100.00,0.015,M/sec S0,1,1,,cpu-migrations,1780526,100.00,0.561,K/sec S0,1,1,,page-faults,1779060,100.00,0.561,K/sec S0,1,875807,,cycles,1769826,100.00,0.491,GHz S0,1,85281,,stalled-cycles-frontend,1767512,100.00,9.74,frontend cycles idle S0,1,576839,,stalled-cycles-backend,1766260,100.00,65.86,backend cycles idle S0,1,288430,,instructions,1762246,100.00,0.33,insn per cycle ====> ,S0,1,,,,,,,2.00,stalled cycles per insn
The above command line uses field separator as "," via "-x," option and per-socket option displays socket value as first field. But here the last line for "stalled cycles per insn" has "," in the beginning.
Sample output using interval mode:
# ./perf stat -I 1000 -x, --per-socket -a -C 1 ls 0.001813453,S0,1,1.87,msec,cpu-clock,1872052,100.00,0.002,CPUs utilized 0.001813453,S0,1,2,,context-switches,1868028,100.00,1.070,K/sec ------ 0.001813453,S0,1,85379,,instructions,1856754,100.00,0.32,insn per cycle ====> 0.001813453,,S0,1,,,,,,,1.34,stalled cycles per insn
Above result also has an extra CSV separator after the timestamp. Patch addresses extra field separator in the beginning of the metric output line.
The counter stats are displayed by function "perf_stat__print_shadow_stats" in code "util/stat-shadow.c". While printing the stats info for "stalled cycles per insn", function "new_line_csv" is used as new_line callback.
The new_line_csv function has check for "os->prefix" and if prefix is not null, it will be printed along with cvs separator.
Snippet from "new_line_csv":
if (os->prefix)
fprintf(os->fh, "%s%s", os->prefix, config->csv_sep);Here os->prefix gets printed followed by ","
which is the cvs separator. The os->prefix is
used in interval mode option ( -I ), to print
time stamp on every new line. But prefix is
already set to contain CSV separator when used
in interval mode for CSV option.
Reference: Function "static void print_interval"
Snippet:
sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
Also if prefix is not assigned (if not used with -I option), it gets set to empty string.
Reference: function printout() in util/stat-display.c Snippet:
.prefix = prefix ? prefix : "",
Since prefix already set to contain cvs_sep in interval option, patch removes printing config->csv_sep in new_line_csv function to avoid printing extra field.
After the patch:
# ./perf stat -x, --per-socket -a -C 1 ls S0,1,2.04,msec,cpu-clock,2045202,100.00,1.013,CPUs utilized S0,1,2,,context-switches,2041444,100.00,979.289,/sec S0,1,0,,cpu-migrations,2040820,100.00,0.000,/sec S0,1,2,,page-faults,2040288,100.00,979.289,/sec S0,1,254589,,cycles,2036066,100.00,0.125,GHz S0,1,82481,,stalled-cycles-frontend,2032420,100.00,32.40,frontend cycles idle S0,1,113170,,stalled-cycles-backend,2031722,100.00,44.45,backend cycles idle S0,1,88766,,instructions,2030942,100.00,0.35,insn per cycle S0,1,,,,,,,1.27,stalled cycles per insn
--- tools/perf/util/stat-display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/stat-display.c +1 -1
@@ -207,7 +207,7 @@ static void new_line_csv(struct perf_stat_config *config, void *ctx)fputc ('\n' , os->fh);if (os->prefix) -fprintf (os->fh,"%s%s" , os->prefix, config->csv_sep); +fprintf (os->fh,"%s" , os->prefix);aggr_printout (config, os->evsel, os->id, os->nr);for (i =0 ; i < os->nfields; i++)fputs (config->csv_sep, os->fh);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 55/131 perf tools: Add the include/perf/ directory to .gitignore
In reply to Greg Kroah-HartmanFrom: Donglin Peng <[email protected]>
[ Upstream commit 94d957ae513fc420d0a5a9bac815eb49ffebb56f ]
Commit 3af1dfdd51e06697 ("perf build: Move perf_dlfilters.h in the source tree") moved perf_dlfilters.h to the include/perf/ directory while include/perf is ignored because it has 'perf' in the name. Newly created files in the include/perf/ directory will be ignored.
Testing:
Before:
$ touch tools/perf/include/perf/junk $ git status | grep junk $ git check-ignore -v tools/perf/include/perf/junk tools/perf/.gitignore:6:perf tools/perf/include/perf/junk
After:
$ git status | grep junk tools/perf/include/perf/junk $ git check-ignore -v tools/perf/include/perf/junk
Add !include/perf/ to perf's .gitignore file.
--- tools/perf/.gitignore | 1 + 1 file changed, 1 insertion(+)
tools/perf/.gitignore +1 -0
@@ -4,6 +4,7 @@ PERF-GUI-VARS PERF-VERSION-FILE FEATURE-DUMP perf +!include/perf/ perf-read-vdso32 perf-read-vdsox32 perf-help
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 56/131 netfilter: nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
In reply to Greg Kroah-HartmanFrom: Ziyang Xuan <[email protected]>
[ Upstream commit 03832a32bf8ff0a8305d94ddd3979835a807248f ]
When type is NFNL_CB_MUTEX and -EAGAIN error occur in nfnetlink_rcv_msg(), it does not execute nfnl_unlock(). That would trigger potential dead lock.
--- net/netfilter/nfnetlink.c | 1 + 1 file changed, 1 insertion(+)
net/netfilter/nfnetlink.c +1 -0
@@ -290,6 +290,7 @@ static int nfnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh,nfnl_lock (subsys_id);if (nfnl_dereference_protected (subsys_id) != ss ||nfnetlink_find_client (type, ss) != nc) { +nfnl_unlock (subsys_id); err = -EAGAIN ;break ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 57/131 netfilter: Cleanup nft_net->module_list from nf_tables_exit_net()
In reply to Greg Kroah-HartmanFrom: Shigeru Yoshida <[email protected]>
[ Upstream commit 03c1f1ef1584c981935fab2fa0c45d3e43e2c235 ]
syzbot reported a warning like below [1]:
WARNING: CPU: 3 PID: 9 at net/netfilter/nf_tables_api.c:10096 nf_tables_exit_net+0x71c/0x840 Modules linked in: CPU: 2 PID: 9 Comm: kworker/u8:0 Tainted: G W 6.1.0-rc3-00072-g8e5423e991e8 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:nf_tables_exit_net+0x71c/0x840 ... Call Trace: <TASK> ? __nft_release_table+0xfc0/0xfc0 ops_exit_list+0xb5/0x180 cleanup_net+0x506/0xb10 ? unregister_pernet_device+0x80/0x80 process_one_work+0xa38/0x1730 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 ? rwlock_bug.part.0+0x90/0x90 ? _raw_spin_lock_irq+0x46/0x50 worker_thread+0x67e/0x10e0 ? process_one_work+0x1730/0x1730 kthread+0x2e5/0x3a0 ? kthread_complete_and_exit+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK>
In nf_tables_exit_net(), there is a case where nft_net->commit_list is empty but nft_net->module_list is not empty. Such a case occurs with the following scenario:
1. nfnetlink_rcv_batch() is called
2. nf_tables_newset() returns -EAGAIN and NFNL_BATCH_FAILURE bit is set to status
3. nf_tables_abort() is called with NFNL_ABORT_AUTOLOAD (nft_net->commit_list is released, but nft_net->module_list is not because of NFNL_ABORT_AUTOLOAD flag)
4. Jump to replay label
5. netlink_skb_clone() fails and returns from the function (this is caused by fault injection in the reproducer of syzbot)
This patch fixes this issue by calling __nf_tables_abort() when nft_net->module_list is not empty in nf_tables_exit_net().
--- net/netfilter/nf_tables_api.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/netfilter/nf_tables_api.c +2 -1
@@ -9884,7 +9884,8 @@ static void __net_exit nf_tables_exit_net(struct net *net)struct nftables_pernet *nft_net =nft_pernet (net);mutex_lock (&nft_net->commit_mutex); -if (!list_empty (&nft_net->commit_list)) +if (!list_empty (&nft_net->commit_list) || + !list_empty (&nft_net->module_list))__nf_tables_abort (net,NFNL_ABORT_NONE );__nft_release_tables (net);mutex_unlock (&nft_net->commit_mutex);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 31/131 bnxt_en: Fix possible crash in bnxt_hwrm_set_coal()
In reply to Greg Kroah-HartmanFrom: Michael Chan <[email protected]>
[ Upstream commit 6d81ea3765dfa6c8a20822613c81edad1c4a16a0 ]
During the error recovery sequence, the rtnl_lock is not held for the entire duration and some datastructures may be freed during the sequence. Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure that the device is fully operational before proceeding to reconfigure the coalescing settings.
This will fix a possible crash like this:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G IOE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019 RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en] Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6 RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5 RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28 RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0 FS: 00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ethnl_set_coalesce+0x3ce/0x4c0 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? coalesce_fill_reply+0x480/0x480 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? syscall_trace_enter+0x1d3/0x2c0 ? __audit_syscall_exit+0x249/0x2a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f38524163bb
--- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +1 -1
@@ -132,7 +132,7 @@ static int bnxt_set_coalesce(struct net_device *dev, } reset_coalesce: -if (netif_running (dev)) { +if (test_bit (BNXT_STATE_OPEN , &bp->state)) {if (update_stats) { rc =bnxt_close_nic (bp, true, false);if (!rc)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 58/131 net: marvell: prestera: fix memory leak in prestera_rxtx_switch_init()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit 519b58bbfa825f042fcf80261cc18e1e35f85ffd ]
When prestera_sdma_switch_init() failed, the memory pointed to by sw->rxtx isn't released. Fix it. Only be compiled, not be tested.
--- drivers/net/ethernet/marvell/prestera/prestera_rxtx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/net/ethernet/marvell/prestera/prestera_rxtx.c +6 -1
@@ -776,6 +776,7 @@ static netdev_tx_t prestera_sdma_xmit(struct prestera_sdma *sdma,int prestera_rxtx_switch_init (struct prestera_switch *sw) {struct prestera_rxtx *rxtx; +int err; rxtx =kzalloc (sizeof (*rxtx),GFP_KERNEL );if (!rxtx)
@@ -783,7 +784,11 @@ int prestera_rxtx_switch_init(struct prestera_switch *sw) sw->rxtx = rxtx; -return prestera_sdma_switch_init (sw); + err =prestera_sdma_switch_init (sw); +if (err) +kfree (rxtx); + +return err; }void prestera_rxtx_switch_fini (struct prestera_switch *sw)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 59/131 net: nixge: disable napi when enable interrupts failed in nixge_open()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit b06334919c7a068d54ba5b219c05e919d89943f7 ]
When failed to enable interrupts in nixge_open() for opening device, napi isn't disabled. When open nixge device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested.
--- drivers/net/ethernet/ni/nixge.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/ni/nixge.c +1 -0
@@ -899,6 +899,7 @@ static int nixge_open(struct net_device *ndev) err_rx_irq:free_irq (priv->tx_irq, ndev); err_tx_irq: +napi_disable (&priv->napi);phy_stop (phy);phy_disconnect (phy);tasklet_kill (&priv->dma_err_tasklet);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 60/131 net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg
In reply to Greg Kroah-HartmanFrom: M Chetan Kumar <[email protected]>
[ Upstream commit d38a648d2d6cc7bee11c6f533ff9426a00c2a74c ]
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed.
Free the acpi_object after use.
--- drivers/net/wwan/iosm/iosm_ipc_pcie.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/net/wwan/iosm/iosm_ipc_pcie.c +8 -3
@@ -232,6 +232,7 @@ static void ipc_pcie_config_init(struct iosm_pcie *ipc_pcie)*/ static enum ipc_pcie_sleep_state ipc_pcie_read_bios_cfg (struct device *dev) { +enum ipc_pcie_sleep_state sleep_state =IPC_PCIE_D0L12 ;union acpi_object *object;acpi_handle handle_acpi;
@@ -242,12 +243,16 @@ static enum ipc_pcie_sleep_state ipc_pcie_read_bios_cfg(struct device *dev) } object =acpi_evaluate_dsm (handle_acpi, &wwan_acpi_guid,0 ,3 ,NULL ); +if (!object) + goto default_ret; + +if (object->integer.value ==3 ) + sleep_state =IPC_PCIE_D3L2 ; -if (object && object->integer.value ==3 ) -return IPC_PCIE_D3L2 ; +kfree (object); default_ret: -return IPC_PCIE_D0L12 ; +return sleep_state; } static int ipc_pcie_probe(struct pci_dev *pci,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 32/131 bnxt_en: fix potentially incorrect return value for ndo_rx_flow_steer
In reply to Greg Kroah-HartmanFrom: Alex Barba <[email protected]>
[ Upstream commit 02597d39145bb0aa81d04bf39b6a913ce9a9d465 ]
In the bnxt_en driver ndo_rx_flow_steer returns '0' whenever an entry that we are attempting to steer is already found. This is not the correct behavior. The return code should be the value/index that corresponds to the entry. Returning zero all the time causes the RFS records to be incorrect unless entry '0' is the correct one. As flows migrate to different cores this can create entries that are not correct.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +1 -1
@@ -12605,8 +12605,8 @@ static int bnxt_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,rcu_read_lock ();hlist_for_each_entry_rcu (fltr, head, hash) {if (bnxt_fltr_match (fltr, new_fltr)) { + rc = fltr->sw_id;rcu_read_unlock (); - rc =0 ; goto err_free; } }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 33/131 net: fman: Unregister ethernet device on removal
In reply to Greg Kroah-HartmanFrom: Sean Anderson <[email protected]>
[ Upstream commit b7cbc6740bd6ad5d43345a2504f7e4beff0d709f ]
When the mac device gets removed, it leaves behind the ethernet device. This will result in a segfault next time the ethernet device accesses mac_dev. Remove the ethernet device when we get removed to prevent this. This is not completely reversible, since some resources aren't cleaned up properly, but that can be addressed later.
--- drivers/net/ethernet/freescale/fman/mac.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/net/ethernet/freescale/fman/mac.c +9 -0
@@ -882,12 +882,21 @@ static int mac_probe(struct platform_device *_of_dev)return err; } +static int mac_remove (struct platform_device *pdev) +{ +struct mac_device *mac_dev =platform_get_drvdata (pdev); + +platform_device_unregister (mac_dev->priv->eth_dev); +return 0 ; +} +static struct platform_driver mac_driver = { .driver = { .name =KBUILD_MODNAME , .of_match_table = mac_match, }, .probe = mac_probe, + .remove = mac_remove, };builtin_platform_driver (mac_driver);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 34/131 capabilities: fix undefined behavior in bit shift for CAP_TO_MASK
In reply to Greg Kroah-HartmanFrom: Gaosheng Cui <[email protected]>
[ Upstream commit 46653972e3ea64f79e7f8ae3aa41a4d3fdb70a13 ]
Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c cap_task_prctl+0x561/0x6f0 security_task_prctl+0x5a/0xb0 __x64_sys_prctl+0x61/0x8f0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>
--- include/uapi/linux/capability.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/uapi/linux/capability.h +1 -1
@@ -426,7 +426,7 @@ struct vfs_ns_cap_data {*/ #define CAP_TO_INDEX (x) ((x) >> 5)/* 1 << 5 == bits in __u32 */ -#define CAP_TO_MASK (x) (1 << ((x) & 31))/* mask for indexed __u32 */ +#define CAP_TO_MASK (x) (1U << ((x) & 31))/* mask for indexed __u32 */ #endif /* _UAPI_LINUX_CAPABILITY_H */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 35/131 phy: ralink: mt7621-pci: add sentinel to quirks table
In reply to Greg Kroah-HartmanFrom: John Thomson <[email protected]>
[ Upstream commit 819b885cd886c193782891c4f51bbcab3de119a4 ]
With mt7621 soc_dev_attr fixed to register the soc as a device, kernel will experience an oops in soc_device_match_attr
This quirk test was introduced in the staging driver in commit 9445ccb3714c ("staging: mt7621-pci-phy: add quirks for 'E2' revision using 'soc_device_attribute'"). The staging driver was removed, and later re-added in commit d87da32372a0 ("phy: ralink: Add PHY driver for MT7621 PCIe PHY") for kernel 5.11
--- drivers/phy/ralink/phy-mt7621-pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/phy/ralink/phy-mt7621-pci.c +2 -1
@@ -280,7 +280,8 @@ static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev, }static const struct soc_device_attribute mt7621_pci_quirks_match[] = { - { .soc_id ="mt7621" , .revision ="E2" } + { .soc_id ="mt7621" , .revision ="E2" }, + {/* sentinel */ } };static const struct regmap_config mt7621_pci_phy_regmap_config = {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 36/131 KVM: s390: pv: dont allow userspace to set the clock under PV
In reply to Greg Kroah-HartmanFrom: Nico Boehr <[email protected]>
[ Upstream commit 6973091d1b50ab4042f6a2d495f59e9db3662ab8 ]
When running under PV, the guest's TOD clock is under control of the ultravisor and the hypervisor isn't allowed to change it. Hence, don't allow userspace to change the guest's TOD clock by returning -EOPNOTSUPP.
When userspace changes the guest's TOD clock, KVM updates its kvm.arch.epoch field and, in addition, the epoch field in all state descriptions of all VCPUs.
But, under PV, the ultravisor will ignore the epoch field in the state description and simply overwrite it on next SIE exit with the actual guest epoch. This leads to KVM having an incorrect view of the guest's TOD clock: it has updated its internal kvm.arch.epoch field, but the ultravisor ignores the field in the state description.
Whenever a guest is now waiting for a clock comparator, KVM will incorrectly calculate the time when the guest should wake up, possibly causing the guest to sleep for much longer than expected.
With this change, kvm_s390_set_tod() will now take the kvm->lock to be able to call kvm_s390_pv_is_protected(). Since kvm_s390_set_tod_clock() also takes kvm->lock, use __kvm_s390_set_tod_clock() instead.
The function kvm_s390_set_tod_clock is now unused, hence remove it. Update the documentation to indicate the TOD clock attr calls can now return -EOPNOTSUPP.
Message-Id: <[email protected]>
--- Documentation/virt/kvm/devices/vm.rst | 3 +++ arch/s390/kvm/kvm-s390.c | 26 +++++++++++++++++--------- arch/s390/kvm/kvm-s390.h | 1 - 3 files changed, 20 insertions(+), 10 deletions(-)
Documentation/virt/kvm/devices/vm.rst +3 -0
@@ -215,6 +215,7 @@ KVM_S390_VM_TOD_EXT). :Parameters: address of a buffer in user space to store the data (u8) to :Returns: -EFAULT if the given address is not accessible from kernel space; -EINVAL if setting the TOD clock extension to != 0 is not supported + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) 3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW -----------------------------------
@@ -224,6 +225,7 @@ the POP (u64). :Parameters: address of a buffer in user space to store the data (u64) to :Returns: -EFAULT if the given address is not accessible from kernel space + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) 3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT -----------------------------------
@@ -237,6 +239,7 @@ it, it is stored as 0 and not allowed to be set to a value != 0. (kvm_s390_vm_tod_clock) to :Returns: -EFAULT if the given address is not accessible from kernel space; -EINVAL if setting the TOD clock extension to != 0 is not supported + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) 4. GROUP: KVM_S390_VM_CRYPTO ============================
arch/s390/kvm/kvm-s390.c +17 -9
@@ -1117,6 +1117,8 @@ static int kvm_s390_vm_get_migration(struct kvm *kvm,return 0 ; } +static void __kvm_s390_set_tod_clock (struct kvm *kvm,const struct kvm_s390_vm_tod_clock *gtod); +static int kvm_s390_set_tod_ext (struct kvm *kvm,struct kvm_device_attr *attr) {struct kvm_s390_vm_tod_clock gtod;
@@ -1126,7 +1128,7 @@ static int kvm_s390_set_tod_ext(struct kvm *kvm, struct kvm_device_attr *attr)if (!test_kvm_facility (kvm,139 ) && gtod.epoch_idx)return -EINVAL ; -kvm_s390_set_tod_clock (kvm, >od); +__kvm_s390_set_tod_clock (kvm, >od);VM_EVENT (kvm,3 ,"SET: TOD extension: 0x%x, TOD base: 0x%llx" , gtod.epoch_idx, gtod.tod);
@@ -1157,7 +1159,7 @@ static int kvm_s390_set_tod_low(struct kvm *kvm, struct kvm_device_attr *attr) sizeof(gtod.tod)))return -EFAULT ; -kvm_s390_set_tod_clock (kvm, >od); +__kvm_s390_set_tod_clock (kvm, >od);VM_EVENT (kvm,3 ,"SET: TOD base: 0x%llx" , gtod.tod);return 0 ; }
@@ -1169,6 +1171,16 @@ static int kvm_s390_set_tod(struct kvm *kvm, struct kvm_device_attr *attr)if (attr->flags)return -EINVAL ; +mutex_lock (&kvm->lock); +/* +* For protected guests, the TOD is managed by the ultravisor, so trying +* to change it will never bring the expected results. +*/ +if (kvm_s390_pv_is_protected (kvm)) { + ret = -EOPNOTSUPP ; + goto out_unlock; + } +switch (attr->attr) {case KVM_S390_VM_TOD_EXT : ret =kvm_s390_set_tod_ext (kvm, attr);
@@ -1183,6 +1195,9 @@ static int kvm_s390_set_tod(struct kvm *kvm, struct kvm_device_attr *attr) ret = -ENXIO ;break ; } + +out_unlock: +mutex_unlock (&kvm->lock);return ret; }
@@ -3941,13 +3956,6 @@ static void __kvm_s390_set_tod_clock(struct kvm *kvm, const struct kvm_s390_vm_tpreempt_enable (); } -void kvm_s390_set_tod_clock (struct kvm *kvm,const struct kvm_s390_vm_tod_clock *gtod) -{ -mutex_lock (&kvm->lock); -__kvm_s390_set_tod_clock (kvm, gtod); -mutex_unlock (&kvm->lock); -} -int kvm_s390_try_set_tod_clock (struct kvm *kvm,const struct kvm_s390_vm_tod_clock *gtod) {if (!mutex_trylock (&kvm->lock))
arch/s390/kvm/kvm-s390.h +0 -1
@@ -326,7 +326,6 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu);int kvm_s390_handle_sigp_pei (struct kvm_vcpu *vcpu);/* implemented in kvm-s390.c */ -void kvm_s390_set_tod_clock (struct kvm *kvm,const struct kvm_s390_vm_tod_clock *gtod);int kvm_s390_try_set_tod_clock (struct kvm *kvm,const struct kvm_s390_vm_tod_clock *gtod);long kvm_arch_fault_in_page (struct kvm_vcpu *vcpu,gpa_t gpa,int writable);int kvm_s390_store_status_unloaded (struct kvm_vcpu *vcpu,unsigned long addr);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 37/131 net: lapbether: fix issue of dev reference count leakage in lapbeth_device_event()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit 531705a765493655472c993627106e19f7e5a6d2 ]
When following tests are performed, it will cause dev reference counting leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2
When new bond device is created, the default type of the bond device is ether. And the bond device is up, lapbeth_device_event() receives the message and creates a new lapbeth device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, lapbeth_device_event() will not put the dev reference count.
--- drivers/net/wan/lapbether.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wan/lapbether.c +1 -1
@@ -446,7 +446,7 @@ static int lapbeth_device_event(struct notifier_block *this,if (dev_net (dev) != &init_net)return NOTIFY_DONE ; -if (!dev_is_ethdev (dev)) +if (!dev_is_ethdev (dev) && !lapbeth_get_x25_dev (dev))return NOTIFY_DONE ;switch (event) {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 28/131 octeontx2-pf: Use hardware register for CQE count
In reply to Greg Kroah-HartmanFrom: Geetha sowjanya <[email protected]>
[ Upstream commit af3826db74d184bc9c2c9d3ff34548e5f317a6f3 ]
Current driver uses software CQ head pointer to poll on CQE header in memory to determine if CQE is valid. Software needs to make sure, that the reads of the CQE do not get re-ordered so much that it ends up with an inconsistent view of the CQE. To ensure that DMB barrier after read to first CQE cacheline and before reading of the rest of the CQE is needed. But having barrier for every CQE read will impact the performance, instead use hardware CQ head and tail pointers to find the valid number of CQEs.
Stable-dep-of: 51afe9026d0c ("octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]")
--- .../marvell/octeontx2/nic/otx2_common.c | 3 + .../marvell/octeontx2/nic/otx2_common.h | 1 + .../marvell/octeontx2/nic/otx2_txrx.c | 69 +++++++++++++++++-- .../marvell/octeontx2/nic/otx2_txrx.h | 5 ++ include/linux/soc/marvell/octeontx2/asm.h | 14 ++++ 5 files changed, 85 insertions(+), 7 deletions(-)
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +3 -0
@@ -1013,6 +1013,9 @@ int otx2_config_nix_queues(struct otx2_nic *pfvf)return err; } + pfvf->cq_op_addr = (__force u64 *)otx2_get_regaddr (pfvf, +NIX_LF_CQ_OP_STATUS ); +/* Initialize work queue for receive buffer refill */ pfvf->refill_wrk =devm_kcalloc (pfvf->dev, pfvf->qset.cq_cnt,sizeof (struct refill_work ),GFP_KERNEL );
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +1 -0
@@ -337,6 +337,7 @@ struct otx2_nic {#define OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED BIT_ULL(13)#define OTX2_FLAG_DMACFLTR_SUPPORT BIT_ULL(14)u64 flags; +u64 *cq_op_addr;struct otx2_qset qset;struct otx2_hw hw;
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +62 -7
118 lines not on this page · raw message
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h +5 -0
@@ -56,6 +56,9 @@*/ #define CQ_QCOUNT_DEFAULT 1 +#define CQ_OP_STAT_OP_ERR 63 +#define CQ_OP_STAT_CQ_ERR 46 +struct queue_stats {u64 bytes;u64 pkts;
@@ -122,6 +125,8 @@ struct otx2_cq_queue {u16 pool_ptrs;u32 cqe_cnt;u32 cq_head; +u32 cq_tail; +u32 pend_cqe;void *cqe_base;struct qmem *cqe;struct otx2_pool *rbpool;
include/linux/soc/marvell/octeontx2/asm.h +14 -0
@@ -34,9 +34,23 @@ : [rf] "+r"(val) \ : [rs] "r"(addr)); \ }) + +static inline u64 otx2_atomic64_fetch_add(u64 incr, u64 *ptr) +{ +u64 result; + + asmvolatile (".cpu generic+lse\n" +"ldadda %x[i], %x[r], [%[b]]" + : [r]"=r" (result),"+m" (*ptr) + : [i]"r" (incr), [b]"r" (ptr) + :"memory" ); +return result; +} +#else #define otx2_lmt_flush (ioaddr) ({ 0; })#define cn10k_lmt_flush (val, addr) ({ addr = val; }) +#define otx2_atomic64_fetch_add (incr, ptr) ({ incr; })#endif #endif /* __SOC_OTX2_ASM_H */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 62/131 net/mlx5: Allow async trigger completion execution on single CPU systems
In reply to Greg Kroah-HartmanFrom: Roy Novich <[email protected]>
[ Upstream commit 2808b37b59288ad8f1897e3546c2296df3384b65 ]
For a single CPU system, the kernel thread executing mlx5_cmd_flush() never releases the CPU but calls down_trylock(&cmd→sem) in a busy loop. On a single processor system, this leads to a deadlock as the kernel thread which executes mlx5_cmd_invoke() never gets scheduled. Fix this, by adding the cond_resched() call to the loop, allow the command completion kernel thread to execute.
--- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/cmd.c +8 -3
@@ -1699,12 +1699,17 @@ void mlx5_cmd_flush(struct mlx5_core_dev *dev)struct mlx5_cmd *cmd = &dev->cmd;int i; -for (i =0 ; i < cmd->max_reg_cmds; i++) -while (down_trylock (&cmd->sem)) +for (i =0 ; i < cmd->max_reg_cmds; i++) { +while (down_trylock (&cmd->sem)) {mlx5_cmd_trigger_completions (dev); +cond_resched (); + } + } -while (down_trylock (&cmd->pages_sem)) +while (down_trylock (&cmd->pages_sem)) {mlx5_cmd_trigger_completions (dev); +cond_resched (); + }/* Unlock cmdif */ up (&cmd->pages_sem);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 71/131 stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit fe5b3ce8b4377e543960220f539b989a927afd8a ]
Add missing pci_disable_device() in the error path in loongson_dwmac_probe().
--- drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +5 -2
@@ -97,7 +97,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_idcontinue ; ret =pcim_iomap_regions (pdev,BIT (0 ),pci_name (pdev));if (ret) -return ret; + goto err_disable_device;break ; }
@@ -108,7 +108,8 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id phy_mode =device_get_phy_mode (&pdev->dev);if (phy_mode <0 ) {dev_err (&pdev->dev,"phy_mode not found\n" ); -return phy_mode; + ret = phy_mode; + goto err_disable_device; } plat->phy_interface = phy_mode;
@@ -149,6 +150,8 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id err_disable_msi:pci_disable_msi (pdev); +err_disable_device: +pci_disable_device (pdev);return ret; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 72/131 stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit 7f94d0498f9c763f37172c08059ae91804c3075a ]
The node returned by of_get_child_by_name() with refcount decremented, of_node_put() needs be called when finish using it. So add it in the error path in loongson_dwmac_probe() and in loongson_dwmac_remove().
--- .../ethernet/stmicro/stmmac/dwmac-loongson.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +14 -5
@@ -75,20 +75,24 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id plat->mdio_bus_data =devm_kzalloc (&pdev->dev,sizeof (*plat->mdio_bus_data),GFP_KERNEL ); -if (!plat->mdio_bus_data) -return -ENOMEM ; +if (!plat->mdio_bus_data) { + ret = -ENOMEM ; + goto err_put_node; + } plat->mdio_bus_data->needs_reset = true; } plat->dma_cfg =devm_kzalloc (&pdev->dev,sizeof (*plat->dma_cfg),GFP_KERNEL ); -if (!plat->dma_cfg) -return -ENOMEM ; +if (!plat->dma_cfg) { + ret = -ENOMEM ; + goto err_put_node; + }/* Enable pci device */ ret =pci_enable_device (pdev);if (ret) {dev_err (&pdev->dev,"%s: ERROR: failed to enable device\n" , __func__); -return ret; + goto err_put_node; }/* Get the base address of device */
@@ -152,13 +156,18 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_idpci_disable_msi (pdev); err_disable_device:pci_disable_device (pdev); +err_put_node: +of_node_put (plat->mdio_node);return ret; }static void loongson_dwmac_remove (struct pci_dev *pdev) { +struct net_device *ndev =dev_get_drvdata (&pdev->dev); +struct stmmac_priv *priv =netdev_priv (ndev);int i; +of_node_put (priv->plat->mdio_node);stmmac_dvr_remove (&pdev->dev);for (i =0 ; i <PCI_STD_NUM_BARS ; i++) {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 73/131 net: phy: mscc: macsec: clear encryption keys when freeing a flow
In reply to Greg Kroah-HartmanFrom: Antoine Tenart <[email protected]>
[ Upstream commit 1b16b3fdf675cca15a537572bac50cc5354368fc ]
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading, but the MSCC PHY driver made a copy, kept it in the flow data and did not clear it when freeing a flow. Fix this.
--- drivers/net/phy/mscc/mscc_macsec.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/phy/mscc/mscc_macsec.c +1 -0
@@ -632,6 +632,7 @@ static void vsc8584_macsec_free_flow(struct vsc8531_private *priv,list_del (&flow->list);clear_bit (flow->index, bitmap); +memzero_explicit (flow->key,sizeof (flow->key));kfree (flow); }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 74/131 net: atlantic: macsec: clear encryption keys from the stack
In reply to Greg Kroah-HartmanFrom: Antoine Tenart <[email protected]>
[ Upstream commit 879785def0f5e71d54399de0f8a5cb399db14171 ]
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading, but the atlantic driver made a copy and did not clear it. Fix this.
[4 Fixes tags below, all part of the same series, no need to split this]
--- .../net/ethernet/aquantia/atlantic/aq_macsec.c | 2 ++ .../aquantia/atlantic/macsec/macsec_api.c | 18 +++++++++++------- 2 files changed, 13 insertions(+), 7 deletions(-)
drivers/net/ethernet/aquantia/atlantic/aq_macsec.c +2 -0
@@ -585,6 +585,7 @@ static int aq_update_txsa(struct aq_nic_s *nic, const unsigned int sc_idx, ret =aq_mss_set_egress_sakey_record (hw, &key_rec, sa_idx); +memzero_explicit (&key_rec,sizeof (key_rec));return ret; }
@@ -932,6 +933,7 @@ static int aq_update_rxsa(struct aq_nic_s *nic, const unsigned int sc_idx, ret =aq_mss_set_ingress_sakey_record (hw, &sa_key_record, sa_idx); +memzero_explicit (&sa_key_record,sizeof (sa_key_record));return ret; }
drivers/net/ethernet/aquantia/atlantic/macsec/macsec_api.c +11 -7
@@ -757,6 +757,7 @@ set_ingress_sakey_record(struct aq_hw_s *hw, u16 table_index) {u16 packed_record[18 ]; +int ret;if (table_index >=NUMROWS_INGRESSSAKEYRECORD )return -EINVAL ;
@@ -789,9 +790,12 @@ set_ingress_sakey_record(struct aq_hw_s *hw, packed_record[16 ] = rec->key_len &0x3 ; -return set_raw_ingress_record (hw, packed_record,18 ,2 , -ROWOFFSET_INGRESSSAKEYRECORD + - table_index); + ret =set_raw_ingress_record (hw, packed_record,18 ,2 , +ROWOFFSET_INGRESSSAKEYRECORD + + table_index); + +memzero_explicit (packed_record,sizeof (packed_record)); +return ret; } int aq_mss_set_ingress_sakey_record(struct aq_hw_s *hw,
@@ -1739,14 +1743,14 @@ static int set_egress_sakey_record(struct aq_hw_s *hw, ret =set_raw_egress_record (hw, packed_record,8 ,2 ,ROWOFFSET_EGRESSSAKEYRECORD + table_index);if (unlikely (ret)) -return ret; + goto clear_key; ret =set_raw_egress_record (hw, packed_record +8 ,8 ,2 ,ROWOFFSET_EGRESSSAKEYRECORD + table_index -32 ); -if (unlikely (ret)) -return ret; -return 0 ; +clear_key: +memzero_explicit (packed_record,sizeof (packed_record)); +return ret; } int aq_mss_set_egress_sakey_record(struct aq_hw_s *hw,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 75/131 ethernet: s2io: disable napi when start nic failed in s2io_card_up()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit 0348c1ab980c1d43fb37b758d4b760990c066cb5 ]
When failed to start nic or add interrupt service routine in s2io_card_up() for opening device, napi isn't disabled. When open s2io device next time, it will trigger a BUG_ON()in napi_enable(). Compile tested only.
--- drivers/net/ethernet/neterion/s2io.c | 29 +++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-)
drivers/net/ethernet/neterion/s2io.c +20 -9
@@ -7125,9 +7125,8 @@ static int s2io_card_up(struct s2io_nic *sp)if (ret) {DBG_PRINT (ERR_DBG ,"%s: Out of memory in Open\n" , dev->name); -s2io_reset (sp); -free_rx_buffers (sp); -return -ENOMEM ; + ret = -ENOMEM ; + goto err_fill_buff; }DBG_PRINT (INFO_DBG ,"Buf in ring:%d is %d:\n" , i, ring->rx_bufs_left);
@@ -7165,18 +7164,16 @@ static int s2io_card_up(struct s2io_nic *sp)/* Enable Rx Traffic and interrupts on the NIC */ if (start_nic (sp)) {DBG_PRINT (ERR_DBG ,"%s: Starting NIC failed\n" , dev->name); -s2io_reset (sp); -free_rx_buffers (sp); -return -ENODEV ; + ret = -ENODEV ; + goto err_out; }/* Add interrupt service routine */ if (s2io_add_isr (sp) !=0 ) {if (sp->config.intr_type ==MSI_X )s2io_rem_isr (sp); -s2io_reset (sp); -free_rx_buffers (sp); -return -ENODEV ; + ret = -ENODEV ; + goto err_out; }timer_setup (&sp->alarm_timer, s2io_alarm_handle,0 );
@@ -7196,6 +7193,20 @@ static int s2io_card_up(struct s2io_nic *sp) }return 0 ; + +err_out: +if (config->napi) { +if (config->intr_type ==MSI_X ) { +for (i =0 ; i < sp->config.rx_ring_num; i++) +napi_disable (&sp->mac_control.rings[i].napi); + }else { +napi_disable (&sp->napi); + } + } +err_fill_buff: +s2io_reset (sp); +free_rx_buffers (sp); +return ret; }/**
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 76/131 net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit f111606b63ff2282428ffbac0447c871eb957b6c ]
When failed to init rxq or txq in mv643xx_eth_open() for opening device, napi isn't disabled. When open mv643xx_eth device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only.
--- drivers/net/ethernet/marvell/mv643xx_eth.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/marvell/mv643xx_eth.c +1 -0
@@ -2477,6 +2477,7 @@ static int mv643xx_eth_open(struct net_device *dev)for (i =0 ; i < mp->rxq_count; i++)rxq_deinit (mp->rxq + i); out: +napi_disable (&mp->napi);free_irq (dev->irq, dev);return err;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 77/131 ethernet: tundra: free irq when alloc ring failed in tsi108_open()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit acce40037041f97baad18142bb253064491ebde3 ]
When alloc tx/rx ring failed in tsi108_open(), it doesn't free irq. Fix it.
--- drivers/net/ethernet/tundra/tsi108_eth.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/ethernet/tundra/tsi108_eth.c +4 -1
@@ -1302,12 +1302,15 @@ static int tsi108_open(struct net_device *dev) data->rxring =dma_alloc_coherent (&data->pdev->dev, rxring_size, &data->rxdma,GFP_KERNEL ); -if (!data->rxring) +if (!data->rxring) { +free_irq (data->irq_num, dev);return -ENOMEM ; + } data->txring =dma_alloc_coherent (&data->pdev->dev, txring_size, &data->txdma,GFP_KERNEL );if (!data->txring) { +free_irq (data->irq_num, dev);dma_free_coherent (&data->pdev->dev, rxring_size, data->rxring, data->rxdma);return -ENOMEM ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 78/131 net: macvlan: fix memory leaks of macvlan_common_newlink
In reply to Greg Kroah-HartmanFrom: Chuang Wang <[email protected]>
[ Upstream commit 23569b5652ee8e8e55a12f7835f59af6f3cefc30 ]
kmemleak reports memory leaks in macvlan_common_newlink, as follows:
ip link add link eth0 name .. type macvlan mode source macaddr add <MAC-ADDR>
kmemleak reports:
unreferenced object 0xffff8880109bb140 (size 64):
comm "ip", pid 284, jiffies 4294986150 (age 430.108s) hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z.....
80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk
backtrace:
[<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300
[<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0
[<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170
[<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0
[<ffffffff81b6797e>] macvlan_newlink+0xe/0x20
[<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50
[<ffffffff81d98278>] rtnl_newlink+0x48/0x70
...In the scenario where the macvlan mode is configured as 'source', macvlan_changelink_sources() will be execured to reconfigure list of remote source mac addresses, at the same time, if register_netdevice() return an error, the resource generated by macvlan_changelink_sources() is not cleaned up.
Using this patch, in the case of an error, it will execute macvlan_flush_sources() to ensure that the resource is cleaned up.
--- drivers/net/macvlan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/macvlan.c +3 -1
@@ -1521,8 +1521,10 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev,/* the macvlan port may be freed by macvlan_uninit when fail to register. * so we destroy the macvlan port only when it's valid. */ -if (create &&macvlan_port_get_rtnl (lowerdev)) +if (create &&macvlan_port_get_rtnl (lowerdev)) { +macvlan_flush_sources (port, vlan);macvlan_port_destroy (port->dev); + }return err; }EXPORT_SYMBOL_GPL (macvlan_common_newlink);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 79/131 riscv: process: fix kernel info leakage
In reply to Greg Kroah-HartmanFrom: Jisheng Zhang <[email protected]>
[ Upstream commit 6510c78490c490a6636e48b61eeaa6fb65981f4b ]
thread_struct's s[12] may contain random kernel memory content, which may be finally leaked to userspace. This is a security hole. Fix it by clearing the s[12] array in thread_struct when fork.
As for kthread case, it's better to clear the s[12] array as well.
--- arch/riscv/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+)
arch/riscv/kernel/process.c +2 -0
@@ -124,6 +124,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg, {struct pt_regs *childregs =task_pt_regs (p); +memset (&p->thread.s,0 ,sizeof (p->thread.s)); +/* p->thread holds context to be restored by __switch_to() */ if (unlikely (p->flags & (PF_KTHREAD |PF_IO_WORKER ))) {/* Kernel thread */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 80/131 riscv: vdso: fix build with llvm
In reply to Greg Kroah-HartmanFrom: Jisheng Zhang <[email protected]>
[ Upstream commit 50f4dd657a0fcf90aa8da8dc2794a8100ff4c37c ]
Even after commit 89fd4a1df829 ("riscv: jump_label: mark arguments as const to satisfy asm constraints"), building with CC_OPTIMIZE_FOR_SIZE
+ LLVM=1 can reproduce below build error:
CC arch/riscv/kernel/vdso/vgettimeofday.o
In file included from <built-in>:4:
In file included from lib/vdso/gettimeofday.c:5:
In file included from include/vdso/datapage.h:17:
In file included from include/vdso/processor.h:10:
In file included from arch/riscv/include/asm/vdso/processor.h:7:
In file included from include/linux/jump_label.h:112:arch/riscv/include/asm/jump_label.h:42:3: error:
invalid operand for inline asm constraint 'i'
" .option push \n\t"
^
1 error generated.
I think the problem is when "-Os" is passed as CFLAGS, it's removed by "CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os" which is introduced in commit e05d57dcb8c7 ("riscv: Fixup __vdso_gettimeofday broke dynamic ftrace"), thus no optimization at all for vgettimeofday.c arm64 does remove "-Os" as well, but it forces "-O2" after removing "-Os".
I compared the generated vgettimeofday.o with "-O2" and "-Os", I think no big performance difference. So let's tell the kbuild not to remove "-Os" rather than follow arm64 style.
vdso related performance can be improved a lot when building kernel with CC_OPTIMIZE_FOR_SIZE after this commit, ("-Os" VS no optimization)
--- arch/riscv/kernel/vdso/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/kernel/vdso/Makefile +1 -1
@@ -30,7 +30,7 @@ obj-y += vdso.o CPPFLAGS_vdso.lds += -P -C -U$(ARCH) # Disable -pg to prevent insert call site -CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os +CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) # Disable profiling and instrumentation for VDSO code GCOV_PROFILE := n
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 63/131 net/mlx5e: E-Switch, Fix comparing termination table instance
In reply to Greg Kroah-HartmanFrom: Roi Dayan <[email protected]>
[ Upstream commit f4f4096b410e8d31c3f07f39de3b17d144edd53d ]
The pkt_reformat pointer being saved under flow_act and not dest attribute in the termination table instance. Fix the comparison pointers.
Also fix returning success if one pkt_reformat pointer is null and the other is not.
--- .../mellanox/mlx5/core/eswitch_offloads_termtbl.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c +8 -6
@@ -30,9 +30,9 @@ mlx5_eswitch_termtbl_hash(struct mlx5_flow_act *flow_act, sizeof(dest->vport.num), hash); hash =jhash ((const void *)&dest->vport.vhca_id,sizeof (dest->vport.num), hash); -if (dest->vport.pkt_reformat) - hash =jhash (dest->vport.pkt_reformat, -sizeof (*dest->vport.pkt_reformat), +if (flow_act->pkt_reformat) + hash =jhash (flow_act->pkt_reformat, +sizeof (*flow_act->pkt_reformat), hash);return hash; }
@@ -53,9 +53,11 @@ mlx5_eswitch_termtbl_cmp(struct mlx5_flow_act *flow_act1,if (ret)return ret; -return dest1->vport.pkt_reformat && dest2->vport.pkt_reformat ? -memcmp (dest1->vport.pkt_reformat, dest2->vport.pkt_reformat, -sizeof (*dest1->vport.pkt_reformat)) :0 ; +if (flow_act1->pkt_reformat && flow_act2->pkt_reformat) +return memcmp (flow_act1->pkt_reformat, flow_act2->pkt_reformat, +sizeof (*flow_act1->pkt_reformat)); + +return !(flow_act1->pkt_reformat == flow_act2->pkt_reformat); } static int
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 81/131 riscv: fix reserved memory setup
In reply to Greg Kroah-HartmanFrom: Conor Dooley <[email protected]>
[ Upstream commit 50e63dd8ed92045eb70a72d7ec725488320fb68b ]
Currently, RISC-V sets up reserved memory using the "early" copy of the device tree. As a result, when trying to get a reserved memory region using of_reserved_mem_lookup(), the pointer to reserved memory regions is using the early, pre-virtual-memory address which causes a kernel panic when trying to use the buffer's name:
Unable to handle kernel paging request at virtual address 00000000401c31ac Oops [#1] Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1 Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) epc : string+0x4a/0xea ra : vsnprintf+0x1e4/0x336 epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0 gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000 t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20 s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000 a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008 s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00 s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002 s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617 t5 : ffffffff812f3618 t6 : ffffffff81203d08 status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d [<ffffffff80338936>] vsnprintf+0x1e4/0x336 [<ffffffff80055ae2>] vprintk_store+0xf6/0x344 [<ffffffff80055d86>] vprintk_emit+0x56/0x192 [<ffffffff80055ed8>] vprintk_default+0x16/0x1e [<ffffffff800563d2>] vprintk+0x72/0x80 [<ffffffff806813b2>] _printk+0x36/0x50 [<ffffffff8068af48>] print_reserved_mem+0x1c/0x24 [<ffffffff808057ec>] paging_init+0x528/0x5bc [<ffffffff808031ae>] setup_arch+0xd0/0x592 [<ffffffff8080070e>] start_kernel+0x82/0x73c
early_init_fdt_scan_reserved_mem() takes no arguments as it operates on initial_boot_params, which is populated by early_init_dt_verify(). On RISC-V, early_init_dt_verify() is called twice. Once, directly, in setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly, very early in the boot process, by parse_dtb() when it calls early_init_dt_scan_nodes().
This first call uses dtb_early_va to set initial_boot_params, which is not usable later in the boot process when early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the corresponding call to early_init_dt_scan_nodes() uses fixmap addresses and doesn't suffer the same fate.
Move early_init_fdt_scan_reserved_mem() further along the boot sequence, after the direct call to early_init_dt_verify() in setup_arch() so that the names use the correct virtual memory addresses. The above supposed that CONFIG_BUILTIN_DTB was not set, but should work equally in the case where it is - unflatted_and_copy_device_tree() also updates initial_boot_params.
--- arch/riscv/kernel/setup.c | 1 + arch/riscv/mm/init.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)
arch/riscv/kernel/setup.c +1 -0
@@ -291,6 +291,7 @@ void __init setup_arch(char **cmdline_p) else pr_err("No DTB found in kernel mappings\n");#endif +early_init_fdt_scan_reserved_mem ();misc_mem_init ();init_resources ();
arch/riscv/mm/init.c +0 -1
@@ -242,7 +242,6 @@ static void __init setup_bootmem(void)memblock_reserve (dtb_early_pa,fdt_totalsize (dtb_early_va)); } -early_init_fdt_scan_reserved_mem ();dma_contiguous_reserve (dma32_phys_limit);if (IS_ENABLED (CONFIG_64BIT ))hugetlb_cma_reserve (PUD_SHIFT -PAGE_SHIFT );
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 82/131 arm64: efi: Fix handling of misaligned runtime regions and drop warning
In reply to Greg Kroah-HartmanFrom: Ard Biesheuvel <[email protected]>
commit 9b9eaee9828fe98b030cf43ac50065a54a2f5d52 upstream.
Currently, when mapping the EFI runtime regions in the EFI page tables, we complain about misaligned regions in a rather noisy way, using WARN().
Not only does this produce a lot of irrelevant clutter in the log, it is factually incorrect, as misaligned runtime regions are actually allowed by the EFI spec as long as they don't require conflicting memory types within the same 64k page.
So let's drop the warning, and tweak the code so that we
- take both the start and end of the region into account when checking for misalignment
- only revert to RWX mappings for non-code regions if misaligned code regions are also known to exist.
--- arch/arm64/kernel/efi.c | 52 +++++++++++++++++++++++++++++++----------------- 1 file changed, 34 insertions(+), 18 deletions(-)
arch/arm64/kernel/efi.c +34 -18
@@ -12,6 +12,14 @@#include <asm/efi.h> +static bool region_is_misaligned (const efi_memory_desc_t *md) +{ +if (PAGE_SIZE ==EFI_PAGE_SIZE ) +return false; +return !PAGE_ALIGNED (md->phys_addr) || + !PAGE_ALIGNED (md->num_pages <<EFI_PAGE_SHIFT ); +} +/* * Only regions of type EFI_RUNTIME_SERVICES_CODE need to be * executable, everything else can be mapped with the XN bits
@@ -25,14 +33,22 @@ static __init pteval_t create_mapping_prif (type ==EFI_MEMORY_MAPPED_IO )return PROT_DEVICE_nGnRE; -if (WARN_ONCE (!PAGE_ALIGNED (md->phys_addr), -"UEFI Runtime regions are not aligned to 64 KB -- buggy firmware?" )) +if (region_is_misaligned (md)) { +static bool __initdata code_is_misaligned; +/* -* If the region is not aligned to the page size of the OS, we -* can not use strict permissions, since that would also affect -* the mapping attributes of the adjacent regions. +* Regions that are not aligned to the OS page size cannot be +* mapped with strict permissions, as those might interfere +* with the permissions that are needed by the adjacent +* region's mapping. However, if we haven't encountered any +* misaligned runtime code regions so far, we can safely use +* non-executable permissions for non-code regions. */ -return pgprot_val (PAGE_KERNEL_EXEC ); + code_is_misaligned |= (type ==EFI_RUNTIME_SERVICES_CODE ); + +return code_is_misaligned ?pgprot_val (PAGE_KERNEL_EXEC ) + :pgprot_val (PAGE_KERNEL ); + }/* R-- */ if ((attr & (EFI_MEMORY_XP | EFI_MEMORY_RO)) ==
@@ -63,19 +79,16 @@ int __init efi_create_mapping(struct mm_bool page_mappings_only = (md->type ==EFI_RUNTIME_SERVICES_CODE || md->type ==EFI_RUNTIME_SERVICES_DATA ); -if (!PAGE_ALIGNED (md->phys_addr) || - !PAGE_ALIGNED (md->num_pages <<EFI_PAGE_SHIFT )) { -/* -* If the end address of this region is not aligned to page -* size, the mapping is rounded up, and may end up sharing a -* page frame with the next UEFI memory region. If we create -* a block entry now, we may need to split it again when mapping -* the next region, and support for that is going to be removed -* from the MMU routines. So avoid block mappings altogether in -* that case. -*/ +/* +* If this region is not aligned to the page size used by the OS, the +* mapping will be rounded outwards, and may end up sharing a page +* frame with an adjacent runtime memory region. Given that the page +* table descriptor covering the shared page will be rewritten when the +* adjacent region gets mapped, we must avoid block mappings here so we +* don't have to worry about splitting them when that happens. +*/ +if (region_is_misaligned (md)) page_mappings_only = true; - } create_pgd_mapping(mm, md->phys_addr, md->virt_addr, md->num_pages << EFI_PAGE_SHIFT,
@@ -102,6 +115,9 @@ int __init efi_set_mapping_permissions(sBUG_ON (md->type !=EFI_RUNTIME_SERVICES_CODE && md->type !=EFI_RUNTIME_SERVICES_DATA ); +if (region_is_misaligned (md)) +return 0 ; +/* * Calling apply_to_page_range() is only safe on regions that are * guaranteed to be mapped down to pages. Since we are only called
Greg Kroah-Hartman
maintainerPATCH 83/131 MIPS: jump_label: Fix compat branch range check
In reply to Greg Kroah-HartmanFrom: Jiaxun Yang <[email protected]>
commit 64ac0befe75bdfaffc396c2b4a0ed5ae6920eeee upstream.
Cast upper bound of branch range to long to do signed compare, avoid negative offset trigger this warning.
--- arch/mips/kernel/jump_label.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/kernel/jump_label.c +1 -1
@@ -56,7 +56,7 @@ void arch_jump_label_transform(struct ju* The branch offset must fit in the instruction's 26 * bit field. */ -WARN_ON ((offset >=BIT (25 )) || +WARN_ON ((offset >= (long )BIT (25 )) || (offset < -(long )BIT (25 ))); insn.j_format.opcode = bc6_op;
Greg Kroah-Hartman
maintainerPATCH 84/131 mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI
In reply to Greg Kroah-HartmanFrom: Brian Norris <[email protected]>
commit ebb5fd38f41132e6924cb33b647337f4a5d5360c upstream.
Several SDHCI drivers need to deactivate command queueing in their reset hook (see sdhci_cqhci_reset() / sdhci-pci-core.c, for example), and several more are coming.
Those reset implementations have some small subtleties (e.g., ordering of initialization of SDHCI vs. CQHCI might leave us resetting with a NULL ->cqe_private), and are often identical across different host drivers.
We also don't want to force a dependency between SDHCI and CQHCI, or vice versa; non-SDHCI drivers use CQHCI, and SDHCI drivers might support command queueing through some other means.
So, implement a small helper, to avoid repeating the same mistakes in different drivers. Simply stick it in a header, because it's so small it doesn't deserve its own module right now, and inlining to each driver is pretty reasonable.
This is marked for -stable, as it is an important prerequisite patch for several SDHCI controller bugfixes that follow.
--- drivers/mmc/host/sdhci-cqhci.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 drivers/mmc/host/sdhci-cqhci.h
drivers/mmc/host/sdhci-cqhci.h new file +24 -0
@@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* Copyright 2022 The Chromium OS Authors +* +* Support that applies to the combination of SDHCI and CQHCI, while not +* expressing a dependency between the two modules. +*/ + +#ifndef __MMC_HOST_SDHCI_CQHCI_H__ +#define __MMC_HOST_SDHCI_CQHCI_H__ + +#include "cqhci.h" +#include "sdhci.h" + +static inline void sdhci_and_cqhci_reset (struct sdhci_host *host,u8 mask) +{ +if ((host->mmc->caps2 &MMC_CAP2_CQE ) && (mask &SDHCI_RESET_ALL ) && + host->mmc->cqe_private) +cqhci_deactivate (host->mmc); + +sdhci_reset (host, mask); +} + +#endif /* __MMC_HOST_SDHCI_CQHCI_H__ */
Greg Kroah-Hartman
maintainerPATCH 85/131 mmc: sdhci-of-arasan: Fix SDHCI_RESET_ALL for CQHCI
In reply to Greg Kroah-HartmanFrom: Brian Norris <[email protected]>
commit 5d249ac37fc2396e8acc1adb0650cdacae5a990d upstream.
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't tracking that properly in software. When out of sync, we may trigger various timeouts.
It's not typical to perform resets while CQE is enabled, but one particular case I hit commonly enough: mmc_suspend() -> mmc_power_off(). Typically we will eventually deactivate CQE (cqhci_suspend() -> cqhci_deactivate()), but that's not guaranteed -- in particular, if we perform a partial (e.g., interrupted) system suspend.
The same bug was already found and fixed for two other drivers, in v5.7 and v5.9:
5cf583f1fb9c ("mmc: sdhci-msm: Deactivate CQE during SDHC reset") df57d73276b8 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel
GLK-based controllers")
The latter is especially prescient, saying "other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL."
So like these other patches, deactivate CQHCI when resetting the controller. Do this via the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch entitled "mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI".
--- drivers/mmc/host/sdhci-of-arasan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-of-arasan.c +2 -1
@@ -25,6 +25,7 @@#include <linux/firmware/xlnx-zynqmp.h> #include "cqhci.h" +#include "sdhci-cqhci.h" #include "sdhci-pltfm.h" #define SDHCI_ARASAN_VENDOR_REGISTER 0x78
@@ -359,7 +360,7 @@ static void sdhci_arasan_reset(struct sdstruct sdhci_pltfm_host *pltfm_host =sdhci_priv (host);struct sdhci_arasan_data *sdhci_arasan =sdhci_pltfm_priv (pltfm_host); -sdhci_reset (host, mask); +sdhci_and_cqhci_reset (host, mask);if (sdhci_arasan->quirks &SDHCI_ARASAN_QUIRK_FORCE_CDTEST ) { ctrl =sdhci_readb (host,SDHCI_HOST_CONTROL );
Greg Kroah-Hartman
maintainerPATCH 86/131 mmc: sdhci_am654: Fix SDHCI_RESET_ALL for CQHCI
In reply to Greg Kroah-HartmanFrom: Brian Norris <[email protected]>
commit 162503fd1c3a1d4e14dbe7f399c1d1bec1c8abbc upstream.
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't tracking that properly in software. When out of sync, we may trigger various timeouts.
It's not typical to perform resets while CQE is enabled, but this may occur in some suspend or error recovery scenarios.
Include this fix by way of the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch entitled "mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI".
--- drivers/mmc/host/sdhci_am654.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/mmc/host/sdhci_am654.c +4 -3
@@ -15,6 +15,7 @@#include <linux/sys_soc.h> #include "cqhci.h" +#include "sdhci-cqhci.h" #include "sdhci-pltfm.h" /* CTL_CFG Registers */
@@ -378,7 +379,7 @@ static void sdhci_am654_reset(struct sdhstruct sdhci_pltfm_host *pltfm_host =sdhci_priv (host);struct sdhci_am654_data *sdhci_am654 =sdhci_pltfm_priv (pltfm_host); -sdhci_reset (host, mask); +sdhci_and_cqhci_reset (host, mask);if (sdhci_am654->quirks &SDHCI_AM654_QUIRK_FORCE_CDTEST ) { ctrl =sdhci_readb (host,SDHCI_HOST_CONTROL );
@@ -464,7 +465,7 @@ static struct sdhci_ops sdhci_am654_ops .set_clock = sdhci_am654_set_clock, .write_b = sdhci_am654_write_b, .irq = sdhci_am654_cqhci_irq, - .reset = sdhci_reset, + .reset = sdhci_and_cqhci_reset, };static const struct sdhci_pltfm_data sdhci_am654_pdata = {
@@ -494,7 +495,7 @@ static struct sdhci_ops sdhci_j721e_8bit .set_clock = sdhci_am654_set_clock, .write_b = sdhci_am654_write_b, .irq = sdhci_am654_cqhci_irq, - .reset = sdhci_reset, + .reset = sdhci_and_cqhci_reset, };static const struct sdhci_pltfm_data sdhci_j721e_8bit_pdata = {
Greg Kroah-Hartman
maintainerPATCH 87/131 mmc: sdhci-tegra: Fix SDHCI_RESET_ALL for CQHCI
In reply to Greg Kroah-HartmanFrom: Brian Norris <[email protected]>
commit 836078449464e6af3b66ae6652dae79af176f21e upstream.
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't tracking that properly in software. When out of sync, we may trigger various timeouts.
It's not typical to perform resets while CQE is enabled, but this may occur in some suspend or error recovery scenarios.
Include this fix by way of the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch entitled "mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI".
--- drivers/mmc/host/sdhci-tegra.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-tegra.c +2 -1
@@ -24,6 +24,7 @@#include <linux/gpio/consumer.h> #include <linux/ktime.h> +#include "sdhci-cqhci.h" #include "sdhci-pltfm.h" #include "cqhci.h"
@@ -363,7 +364,7 @@ static void tegra_sdhci_reset(struct sdhconst struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;u32 misc_ctrl, clk_ctrl, pad_ctrl; -sdhci_reset (host, mask); +sdhci_and_cqhci_reset (host, mask);if (!(mask &SDHCI_RESET_ALL ))return ;
Greg Kroah-Hartman
maintainerPATCH 88/131 mmc: sdhci-esdhc-imx: use the correct host caps for MMC_CAP_8_BIT_DATA
In reply to Greg Kroah-HartmanFrom: Haibo Chen <[email protected]>
commit f002f45a00ee14214d96b18b9a555fe2c56afb20 upstream.
MMC_CAP_8_BIT_DATA belongs to struct mmc_host, not struct sdhci_host. So correct it here.
--- drivers/mmc/host/sdhci-esdhc-imx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mmc/host/sdhci-esdhc-imx.c +2 -2
@@ -1654,14 +1654,14 @@ static int sdhci_esdhc_imx_probe(structif (imx_data->socdata->flags &ESDHC_FLAG_ERR004536 ) host->quirks |=SDHCI_QUIRK_BROKEN_ADMA ; -if (host->caps &MMC_CAP_8_BIT_DATA && +if (host->mmc->caps &MMC_CAP_8_BIT_DATA && imx_data->socdata->flags &ESDHC_FLAG_HS400 ) host->mmc->caps2 |=MMC_CAP2_HS400 ;if (imx_data->socdata->flags &ESDHC_FLAG_BROKEN_AUTO_CMD23 ) host->quirks2 |=SDHCI_QUIRK2_ACMD23_BROKEN ; -if (host->caps &MMC_CAP_8_BIT_DATA && +if (host->mmc->caps &MMC_CAP_8_BIT_DATA && imx_data->socdata->flags &ESDHC_FLAG_HS400_ES ) { host->mmc->caps2 |=MMC_CAP2_HS400_ES ; host->mmc_host_ops.hs400_enhanced_strobe =
Greg Kroah-Hartman
maintainerPATCH 89/131 ALSA: hda/hdmi - enable runtime pm for more AMD display audio
In reply to Greg Kroah-HartmanFrom: Evan Quan <[email protected]>
commit fdcc4c22b7ab20e90b97f8bc6225d876b72b8f16 upstream.
We are able to power down the GPU and audio via the GPU driver so flag these asics as supporting runtime pm.
--- sound/pci/hda/hda_intel.c | 3 +++ 1 file changed, 3 insertions(+)
sound/pci/hda/hda_intel.c +3 -0
@@ -2687,6 +2687,9 @@ static const struct pci_device_id azx_id { PCI_DEVICE(0x1002, 0xab28), .driver_data =AZX_DRIVER_ATIHDMI_NS |AZX_DCAPS_PRESET_ATI_HDMI_NS | AZX_DCAPS_PM_RUNTIME }, + { PCI_DEVICE(0x1002, 0xab30), + .driver_data =AZX_DRIVER_ATIHDMI_NS |AZX_DCAPS_PRESET_ATI_HDMI_NS | + AZX_DCAPS_PM_RUNTIME }, { PCI_DEVICE(0x1002, 0xab38), .driver_data =AZX_DRIVER_ATIHDMI_NS |AZX_DCAPS_PRESET_ATI_HDMI_NS | AZX_DCAPS_PM_RUNTIME },
Greg Kroah-Hartman
maintainerPATCH 90/131 ALSA: hda/ca0132: add quirk for EVGA Z390 DARK
In reply to Greg Kroah-HartmanFrom: Xian Wang <[email protected]>
commit 0c423e2ffa7edd3f8f9bcf17ce73fa9c7509b99e upstream.
The Z390 DARK mainboard uses a CA0132 audio controller. The quirk is needed to enable surround sound and 3.5mm headphone jack handling in the front audio connector as well as in the rear of the board when in stereo mode.
Page 97 of the linked manual contains instructions to setup the controller.
--- sound/pci/hda/patch_ca0132.c | 1 + 1 file changed, 1 insertion(+)
sound/pci/hda/patch_ca0132.c +1 -0
@@ -1306,6 +1306,7 @@ static const struct snd_pci_quirk ca0132SND_PCI_QUIRK (0x1458 ,0xA026 ,"Gigabyte G1.Sniper Z97" ,QUIRK_R3DI ),SND_PCI_QUIRK (0x1458 ,0xA036 ,"Gigabyte GA-Z170X-Gaming 7" ,QUIRK_R3DI ),SND_PCI_QUIRK (0x3842 ,0x1038 ,"EVGA X99 Classified" ,QUIRK_R3DI ), +SND_PCI_QUIRK (0x3842 ,0x1055 ,"EVGA Z390 DARK" ,QUIRK_R3DI ),SND_PCI_QUIRK (0x1102 ,0x0013 ,"Recon3D" ,QUIRK_R3D ),SND_PCI_QUIRK (0x1102 ,0x0018 ,"Recon3D" ,QUIRK_R3D ), SND_PCI_QUIRK(0x1102, 0x0051, "Sound Blaster AE-5", QUIRK_AE5),
Greg Kroah-Hartman
maintainerPATCH 64/131 net: cpsw: disable napi in cpsw_ndo_open()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit 6d47b53fb3f363a74538a1dbd09954af3d8d4131 ]
When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for opening device, napi isn't disabled. When open cpsw device next time, it will report a invalid opcode issue. Compiled tested only.
--- drivers/net/ethernet/ti/cpsw.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/ethernet/ti/cpsw.c +2 -0
@@ -856,6 +856,8 @@ static int cpsw_ndo_open(struct net_device *ndev) err_cleanup:if (!cpsw->usage_count) { +napi_disable (&cpsw->napi_rx); +napi_disable (&cpsw->napi_tx);cpdma_ctlr_stop (cpsw->dma);cpsw_destroy_xdp_rxqs (cpsw); }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 91/131 ALSA: hda: fix potential memleak in add_widget_node
In reply to Greg Kroah-HartmanFrom: Ye Bin <[email protected]>
commit 9a5523f72bd2b0d66eef3d58810c6eb7b5ffc143 upstream.
As 'kobject_add' may allocated memory for 'kobject->name' when return error. And in this function, if call 'kobject_add' failed didn't free kobject. So call 'kobject_put' to recycling resources.
--- sound/hda/hdac_sysfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
sound/hda/hdac_sysfs.c +3 -1
@@ -346,8 +346,10 @@ static int add_widget_node(struct kobjecreturn -ENOMEM ;kobject_init (kobj, &widget_ktype); err =kobject_add (kobj, parent,"%02x" , nid); -if (err <0 ) +if (err <0 ) { +kobject_put (kobj);return err; + } err =sysfs_create_group (kobj, group);if (err <0 ) {kobject_put (kobj);
Greg Kroah-Hartman
maintainerPATCH 92/131 ALSA: hda/realtek: Add Positivo C6300 model quirk
In reply to Greg Kroah-HartmanFrom: Edson Juliano Drosdeck <[email protected]>
commit 79e28f2ab3440e08f5fbf65648b008341c37b496 upstream.
Positivo Master C6300 (1849:a233) require quirk for anabling headset-mic
--- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -9244,6 +9244,7 @@ static const struct snd_pci_quirk alc269SND_PCI_QUIRK (0x17aa ,0x511f ,"Thinkpad" ,ALC298_FIXUP_TPT470_DOCK ),SND_PCI_QUIRK (0x17aa ,0x9e54 ,"LENOVO NB" ,ALC269_FIXUP_LENOVO_EAPD ),SND_PCI_QUIRK (0x1849 ,0x1233 ,"ASRock NUC Box 1100" ,ALC233_FIXUP_NO_AUDIO_JACK ), +SND_PCI_QUIRK (0x1849 ,0xa233 ,"Positivo Master C6300" ,ALC269_FIXUP_HEADSET_MIC ),SND_PCI_QUIRK (0x19e5 ,0x3204 ,"Huawei MACH-WX9" ,ALC256_FIXUP_HUAWEI_MACH_WX9_PINS ),SND_PCI_QUIRK (0x19e5 ,0x320f ,"Huawei WRT-WX9 " ,ALC256_FIXUP_ASUS_MIC_NO_PRESENCE ), SND_PCI_QUIRK(0x1b35, 0x1235, "CZC B20", ALC269_FIXUP_CZC_B20),
Greg Kroah-Hartman
maintainerPATCH 65/131 net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit d75aed1428da787cbe42bc073d76f1354f364d92 ]
When failed to bind qsets in cxgb_up() for opening device, napi isn't disabled. When open cxgb3 device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only.
--- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +1 -0
@@ -1302,6 +1302,7 @@ static int cxgb_up(struct adapter *adap)if (ret <0 ) {CH_ERR (adap,"failed to bind qsets, err %d\n" , ret);t3_intr_disable (adap); +quiesce_rx (adap);free_irq_resources (adap); err = ret; goto out;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 66/131 stmmac: intel: Enable 2.5Gbps for Intel AlderLake-S
In reply to Greg Kroah-HartmanFrom: Wong Vee Khee <[email protected]>
[ Upstream commit 23d743301198f7903d732d5abb4f2b44f22f5df0 ]
Intel AlderLake-S platform is capable of running on 2.5GBps link speed.
This patch enables 2.5Gbps link speed on AlderLake-S platform.
Stable-dep-of: dcea1a8107c0 ("stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz")
--- drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +1 -2
@@ -722,6 +722,7 @@ static int tgl_common_data(struct pci_dev *pdev, plat->rx_queues_to_use =6 ; plat->tx_queues_to_use =4 ; plat->clk_ptp_rate =200000000 ; + plat->speed_mode_2500 = intel_speed_mode_2500; plat->safety_feat_cfg->tsoee =1 ; plat->safety_feat_cfg->mrxpee =0 ;
@@ -741,7 +742,6 @@ static int tgl_sgmii_phy0_data(struct pci_dev *pdev, { plat->bus_id =1 ; plat->phy_interface =PHY_INTERFACE_MODE_SGMII ; - plat->speed_mode_2500 = intel_speed_mode_2500; plat->serdes_powerup = intel_serdes_powerup; plat->serdes_powerdown = intel_serdes_powerdown;return tgl_common_data (pdev, plat);
@@ -756,7 +756,6 @@ static int tgl_sgmii_phy1_data(struct pci_dev *pdev, { plat->bus_id =2 ; plat->phy_interface =PHY_INTERFACE_MODE_SGMII ; - plat->speed_mode_2500 = intel_speed_mode_2500; plat->serdes_powerup = intel_serdes_powerup; plat->serdes_powerdown = intel_serdes_powerdown;return tgl_common_data (pdev, plat);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 67/131 stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
In reply to Greg Kroah-HartmanFrom: Tan, Tee Min <[email protected]>
[ Upstream commit dcea1a8107c04b9521dee1dd37971757a22db162 ]
Current Intel platform has an output of ~976ms interval when probed on 1 Pulse-per-Second(PPS) hardware pin.
The correct PTP clock frequency for PCH GbE should be 204.8MHz instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz.
--- drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +9 -2
@@ -593,7 +593,6 @@ static int ehl_common_data(struct pci_dev *pdev, { plat->rx_queues_to_use =8 ; plat->tx_queues_to_use =8 ; - plat->clk_ptp_rate =200000000 ; plat->use_phy_wol =1 ; plat->safety_feat_cfg->tsoee =1 ;
@@ -618,6 +617,8 @@ static int ehl_sgmii_data(struct pci_dev *pdev, plat->serdes_powerup = intel_serdes_powerup; plat->serdes_powerdown = intel_serdes_powerdown; + plat->clk_ptp_rate =204800000 ; +return ehl_common_data (pdev, plat); }
@@ -631,6 +632,8 @@ static int ehl_rgmii_data(struct pci_dev *pdev, plat->bus_id =1 ; plat->phy_interface =PHY_INTERFACE_MODE_RGMII ; + plat->clk_ptp_rate =204800000 ; +return ehl_common_data (pdev, plat); }
@@ -647,6 +650,8 @@ static int ehl_pse0_common_data(struct pci_dev *pdev, plat->bus_id =2 ; plat->addr64 =32 ; + plat->clk_ptp_rate =200000000 ; +intel_mgbe_pse_crossts_adj (intel_priv,EHL_PSE_ART_MHZ );return ehl_common_data (pdev, plat);
@@ -686,6 +691,8 @@ static int ehl_pse1_common_data(struct pci_dev *pdev, plat->bus_id =3 ; plat->addr64 =32 ; + plat->clk_ptp_rate =200000000 ; +intel_mgbe_pse_crossts_adj (intel_priv,EHL_PSE_ART_MHZ );return ehl_common_data (pdev, plat);
@@ -721,7 +728,7 @@ static int tgl_common_data(struct pci_dev *pdev, { plat->rx_queues_to_use =6 ; plat->tx_queues_to_use =4 ; - plat->clk_ptp_rate =200000000 ; + plat->clk_ptp_rate =204800000 ; plat->speed_mode_2500 = intel_speed_mode_2500; plat->safety_feat_cfg->tsoee =1 ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 68/131 mctp: Fix an error handling path in mctp_init()
In reply to Greg Kroah-HartmanFrom: Wei Yongjun <[email protected]>
[ Upstream commit d4072058af4fd8fb4658e7452289042a406a9398 ]
If mctp_neigh_init() return error, the routes resources should be released in the error handling path. Otherwise some resources leak.
--- net/mctp/af_mctp.c | 4 +++- net/mctp/route.c | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-)
net/mctp/af_mctp.c +3 -1
@@ -375,12 +375,14 @@ static __init int mctp_init(void) rc =mctp_neigh_init ();if (rc) - goto err_unreg_proto; + goto err_unreg_routes;mctp_device_init ();return 0 ; +err_unreg_routes: +mctp_routes_exit (); err_unreg_proto:proto_unregister (&mctp_proto); err_unreg_sock:
net/mctp/route.c +1 -1
@@ -1109,7 +1109,7 @@ int __init mctp_routes_init(void)return register_pernet_subsys (&mctp_net_ops); } -void __exit mctp_routes_exit(void) +void mctp_routes_exit (void ) {unregister_pernet_subsys (&mctp_net_ops);rtnl_unregister (PF_MCTP ,RTM_DELROUTE );
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 69/131 cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
In reply to Greg Kroah-HartmanFrom: Zhengchao Shao <[email protected]>
[ Upstream commit c6092ea1e6d7bd12acd881f6aa2b5054cd70e096 ]
When t4vf_update_port_info() failed in cxgb4vf_open(), resources applied during adapter goes up are not cleared. Fix it. Only be compiled, not be tested.
--- drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +1 -1
@@ -858,7 +858,7 @@ static int cxgb4vf_open(struct net_device *dev)*/ err =t4vf_update_port_info (pi);if (err <0 ) -return err; + goto err_unwind;/* * Note that this interface is up and start everything up ...
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 70/131 stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit f2d45fdf9a0ed2c94c01c422a0d0add8ffd42099 ]
pci_enable_msi() has been called in loongson_dwmac_probe(), so pci_disable_msi() needs be called in remove path and error path of probe().
--- .../net/ethernet/stmicro/stmmac/dwmac-loongson.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +12 -1
@@ -125,6 +125,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_idif (res.irq <0 ) {dev_err (&pdev->dev,"IRQ macirq not found\n" ); ret = -ENODEV ; + goto err_disable_msi; } res.wol_irq =of_irq_get_byname (np,"eth_wake_irq" );
@@ -137,9 +138,18 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_idif (res.lpi_irq <0 ) {dev_err (&pdev->dev,"IRQ eth_lpi not found\n" ); ret = -ENODEV ; + goto err_disable_msi; } -return stmmac_dvr_probe (&pdev->dev, plat, &res); + ret =stmmac_dvr_probe (&pdev->dev, plat, &res); +if (ret) + goto err_disable_msi; + +return ret; + +err_disable_msi: +pci_disable_msi (pdev); +return ret; }static void loongson_dwmac_remove (struct pci_dev *pdev)
@@ -155,6 +165,7 @@ static void loongson_dwmac_remove(struct pci_dev *pdev)break ; } +pci_disable_msi (pdev);pci_disable_device (pdev); }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 61/131 net/mlx5: Bridge, verify LAG state when adding bond to bridge
In reply to Greg Kroah-HartmanFrom: Vlad Buslov <[email protected]>
[ Upstream commit 15f8f168952f54d3c86d734dc764f20844e423ac ]
Mlx5 LAG is initialized asynchronously on a workqueue which means that for a brief moment after setting mlx5 UL representors as lower devices of a bond netdevice the LAG itself is not fully initialized in the driver. When adding such bond device to a bridge mlx5 bridge code will not consider it as offload-capable, skip creating necessary bookkeeping and fail any further bridge offload-related commands with it (setting VLANs, offloading FDBs, etc.). In order to make the error explicit during bridge initialization stage implement the code that detects such condition during NETDEV_PRECHANGEUPPER event and returns an error.
--- .../mellanox/mlx5/core/en/rep/bridge.c | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c +31 -0
@@ -164,6 +164,36 @@ static int mlx5_esw_bridge_port_changeupper(struct notifier_block *nb, void *ptrreturn err; } +static int +mlx5_esw_bridge_changeupper_validate_netdev (void *ptr) +{ +struct net_device *dev =netdev_notifier_info_to_dev (ptr); +struct netdev_notifier_changeupper_info *info = ptr; +struct net_device *upper = info->upper_dev; +struct net_device *lower; +struct list_head *iter; + +if (!netif_is_bridge_master (upper) || !netif_is_lag_master (dev)) +return 0 ; + +netdev_for_each_lower_dev (dev, lower, iter) { +struct mlx5_core_dev *mdev; +struct mlx5e_priv *priv; + +if (!mlx5e_eswitch_rep (lower)) +continue ; + + priv =netdev_priv (lower); + mdev = priv->mdev; +if (!mlx5_lag_is_active (mdev)) +return -EAGAIN ; +if (!mlx5_lag_is_shared_fdb (mdev)) +return -EOPNOTSUPP ; + } + +return 0 ; +} +static int mlx5_esw_bridge_switchdev_port_event (struct notifier_block *nb,unsigned long event,void *ptr) {
@@ -171,6 +201,7 @@ static int mlx5_esw_bridge_switchdev_port_event(struct notifier_block *nb,switch (event) {case NETDEV_PRECHANGEUPPER : + err =mlx5_esw_bridge_changeupper_validate_netdev (ptr);break ;case NETDEV_CHANGEUPPER :
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 94/131 ALSA: usb-audio: Add quirk entry for M-Audio Micro
In reply to Greg Kroah-HartmanFrom: Takashi Iwai <[email protected]>
commit 2f01a612d4758b45f775dbb88a49cf534ba47275 upstream.
M-Audio Micro (0762:201a) defines the descriptor as vendor-specific, while the content seems class-compliant. Just overriding the probe makes the device working.
--- sound/usb/quirks-table.h | 4 ++++ 1 file changed, 4 insertions(+)
sound/usb/quirks-table.h +4 -0
@@ -2050,6 +2050,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { +/* M-Audio Micro */ +USB_DEVICE_VENDOR_SPEC (0x0763 ,0x201a ), +}, +{USB_DEVICE_VENDOR_SPEC (0x0763 ,0x2030 ), .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {/* .vendor_name = "M-Audio", */
Greg Kroah-Hartman
maintainerPATCH 103/131 wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()
In reply to Greg Kroah-HartmanFrom: Wen Gong <[email protected]>
commit f45cb6b29cd36514e13f7519770873d8c0457008 upstream.
(cherry picked from commit d99884ad9e3673a12879bc2830f6e5a66cccbd78 in ath-next as users are seeing this bug more now, also cc stable)
Running this test in a loop it is easy to reproduce an rtnl deadlock:
iw reg set FI
ifconfig wlan0 down
What happens is that thread A (workqueue) tries to update the regulatory:
try to acquire the rtnl_lock of ar->regd_update_work
rtnl_lock+0x17/0x20
ath11k_regd_update+0x15a/0x260 [ath11k]
ath11k_regd_update_work+0x15/0x20 [ath11k]
process_one_work+0x228/0x670
worker_thread+0x4d/0x440
kthread+0x16d/0x1b0
ret_from_fork+0x22/0x30And thread B (ifconfig) tries to stop the interface:
try to cancel_work_sync(&ar->regd_update_work) in ath11k_mac_op_stop().
ifconfig 3109 [003] 2414.232506: probe:
ath11k_mac_op_stop: (ffffffffc14187a0)
drv_stop+0x30 ([mac80211])
ieee80211_do_stop+0x5d2 ([mac80211])
ieee80211_stop+0x3e ([mac80211])
__dev_close_many+0x9e ([kernel.kallsyms])
__dev_change_flags+0xbe ([kernel.kallsyms])
dev_change_flags+0x23 ([kernel.kallsyms])
devinet_ioctl+0x5e3 ([kernel.kallsyms])
inet_ioctl+0x197 ([kernel.kallsyms])
sock_do_ioctl+0x4d ([kernel.kallsyms])
sock_ioctl+0x264 ([kernel.kallsyms])
__x64_sys_ioctl+0x92 ([kernel.kallsyms])
do_syscall_64+0x3a ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe+0x63 ([kernel.kallsyms])
__GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so)The sequence of deadlock is:
1. Thread B calls rtnl_lock().
2. Thread A starts to run and calls rtnl_lock() from within ath11k_regd_update_work(), then enters wait state because the lock is owned by thread B.
3. Thread B continues to run and tries to call cancel_work_sync(&ar->regd_update_work), but thread A is in ath11k_regd_update_work() waiting for rtnl_lock(). So cancel_work_sync() forever waits for ath11k_regd_update_work() to finish and we have a deadlock.
Fix this by switching from using regulatory_set_wiphy_regd_sync() to regulatory_set_wiphy_regd(). Now cfg80211 will schedule another workqueue which handles the locking on it's own. So the ath11k workqueue can simply exit without taking any locks, avoiding the deadlock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
--- drivers/net/wireless/ath/ath11k/reg.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/net/wireless/ath/ath11k/reg.c +1 -5
@@ -247,11 +247,7 @@ int ath11k_regd_update(struct ath11k *ar goto err; } -rtnl_lock (); -wiphy_lock (ar->hw->wiphy); - ret =regulatory_set_wiphy_regd_sync (ar->hw->wiphy, regd_copy); -wiphy_unlock (ar->hw->wiphy); -rtnl_unlock (); + ret =regulatory_set_wiphy_regd (ar->hw->wiphy, regd_copy);kfree (regd_copy);
Greg Kroah-Hartman
maintainerPATCH 104/131 btrfs: fix match incorrectly in dev_args_match_device
In reply to Greg Kroah-HartmanFrom: Liu Shixin <[email protected]>
commit 0fca385d6ebc3cabb20f67bcf8a71f1448bdc001 upstream.
syzkaller found a failed assertion:
assertion failed: (args->devid != (u64)-1) || args->missing, in fs/btrfs/volumes.c:6921
This can be triggered when we set devid to (u64)-1 by ioctl. In this case, the match of devid will be skipped and the match of device may succeed incorrectly.
Patch 562d7b1512f7 introduced this function which is used to match device. This function contains two matching scenarios, we can distinguish them by checking the value of args->missing rather than check whether args->devid and args->uuid is default value.
--- fs/btrfs/volumes.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
fs/btrfs/volumes.c +8 -8
@@ -6841,18 +6841,18 @@ static bool dev_args_match_fs_devices(costatic bool dev_args_match_device (const struct btrfs_dev_lookup_args *args,const struct btrfs_device *device) { -ASSERT ((args->devid != (u64)-1 ) || args->missing); +if (args->missing) { +if (test_bit (BTRFS_DEV_STATE_IN_FS_METADATA , &device->dev_state) && + !device->bdev) +return true; +return false; + } -if ((args->devid != (u64)-1 ) && device->devid != args->devid) +if (device->devid != args->devid)return false;if (args->uuid &&memcmp (device->uuid, args->uuid,BTRFS_UUID_SIZE ) !=0 )return false; -if (!args->missing) -return true; -if (test_bit (BTRFS_DEV_STATE_IN_FS_METADATA , &device->dev_state) && - !device->bdev) -return true; -return false; +return true; }/*
Greg Kroah-Hartman
maintainerPATCH 105/131 btrfs: selftests: fix wrong error check in btrfs_free_dummy_root()
In reply to Greg Kroah-HartmanFrom: Zhang Xiaoxu <[email protected]>
commit 9b2f20344d450137d015b380ff0c2e2a6a170135 upstream.
The btrfs_alloc_dummy_root() uses ERR_PTR as the error return value rather than NULL, if error happened, there will be a NULL pointer dereference:
BUG: KASAN: null-ptr-deref in btrfs_free_dummy_root+0x21/0x50 [btrfs] Read of size 8 at addr 000000000000002c by task insmod/258926 CPU: 2 PID: 258926 Comm: insmod Tainted: G W 6.1.0-rc2+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 kasan_report+0xb7/0x140 kasan_check_range+0x145/0x1a0 btrfs_free_dummy_root+0x21/0x50 [btrfs] btrfs_test_free_space_cache+0x1a8c/0x1add [btrfs] btrfs_run_sanity_tests+0x65/0x80 [btrfs] init_btrfs_fs+0xec/0x154 [btrfs] do_one_initcall+0x87/0x2a0 do_init_module+0xdf/0x320 load_module+0x3006/0x3390 __do_sys_finit_module+0x113/0x1b0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0
--- fs/btrfs/tests/btrfs-tests.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/btrfs/tests/btrfs-tests.c +1 -1
@@ -199,7 +199,7 @@ void btrfs_free_dummy_fs_info(struct btrvoid btrfs_free_dummy_root (struct btrfs_root *root) { -if (!root) +if (IS_ERR_OR_NULL (root))return ;/* Will be freed by btrfs_free_fs_roots */ if (WARN_ON (test_bit (BTRFS_ROOT_IN_RADIX , &root->state)))
Greg Kroah-Hartman
maintainerPATCH 106/131 btrfs: zoned: initialize devices zone info for seeding
In reply to Greg Kroah-HartmanFrom: Johannes Thumshirn <[email protected]>
commit a8d1b1647bf8244a5f270538e9e636e2657fffa3 upstream.
When performing seeding on a zoned filesystem it is necessary to initialize each zoned device's btrfs_zoned_device_info structure, otherwise mounting the filesystem will cause a NULL pointer dereference.
This was uncovered by fstests' testcase btrfs/163.
--- fs/btrfs/disk-io.c | 4 +++- fs/btrfs/volumes.c | 11 +++++++++-- fs/btrfs/volumes.h | 2 +- 3 files changed, 13 insertions(+), 4 deletions(-)
fs/btrfs/disk-io.c +3 -1
@@ -2404,7 +2404,9 @@ static int btrfs_read_roots(struct btrfs fs_info->dev_root = root; }/* Initialize fs_info for all devices in any case */ -btrfs_init_devices_late (fs_info); + ret =btrfs_init_devices_late (fs_info); +if (ret) + goto out;/* If IGNOREDATACSUMS is set don't bother reading the csum root. */ if (!btrfs_test_opt (fs_info,IGNOREDATACSUMS )) {
fs/btrfs/volumes.c +9 -2
@@ -7681,10 +7681,11 @@ error:return ret; } -void btrfs_init_devices_late (struct btrfs_fs_info *fs_info) +int btrfs_init_devices_late (struct btrfs_fs_info *fs_info) {struct btrfs_fs_devices *fs_devices = fs_info->fs_devices, *seed_devs;struct btrfs_device *device; +int ret =0 ; fs_devices->fs_info = fs_info;
@@ -7693,12 +7694,18 @@ void btrfs_init_devices_late(struct btrf device->fs_info = fs_info;list_for_each_entry (seed_devs, &fs_devices->seed_list, seed_list) { -list_for_each_entry (device, &seed_devs->devices, dev_list) +list_for_each_entry (device, &seed_devs->devices, dev_list) { device->fs_info = fs_info; + ret =btrfs_get_dev_zone_info (device, false); +if (ret) +break ; + } seed_devs->fs_info = fs_info; }mutex_unlock (&fs_devices->device_list_mutex); + +return ret; } static u64 btrfs_dev_stats_value(const struct extent_buffer *eb,
fs/btrfs/volumes.h +1 -1
@@ -539,7 +539,7 @@ int find_free_dev_extent(struct btrfs_devoid btrfs_dev_stat_inc_and_print (struct btrfs_device *dev,int index);int btrfs_get_dev_stats (struct btrfs_fs_info *fs_info,struct btrfs_ioctl_get_dev_stats *stats); -void btrfs_init_devices_late (struct btrfs_fs_info *fs_info); +int btrfs_init_devices_late (struct btrfs_fs_info *fs_info);int btrfs_init_dev_stats (struct btrfs_fs_info *fs_info);int btrfs_run_dev_stats (struct btrfs_trans_handle *trans);void btrfs_rm_dev_replace_remove_srcdev (struct btrfs_device *srcdev);
Greg Kroah-Hartman
maintainerPATCH 107/131 mms: sdhci-esdhc-imx: Fix SDHCI_RESET_ALL for CQHCI
In reply to Greg Kroah-HartmanFrom: Brian Norris <[email protected]>
commit fb1dec44c6750bb414f47b929c8c175a1a127c31 upstream.
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't tracking that properly in software. When out of sync, we may trigger various timeouts.
It's not typical to perform resets while CQE is enabled, but this may occur in some suspend or error recovery scenarios.
Include this fix by way of the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch entitled "mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI".
--- drivers/mmc/host/sdhci-esdhc-imx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-esdhc-imx.c +2 -1
@@ -25,6 +25,7 @@#include <linux/of_device.h> #include <linux/pinctrl/consumer.h> #include <linux/pm_runtime.h> +#include "sdhci-cqhci.h" #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" #include "cqhci.h"
@@ -1273,7 +1274,7 @@ static void esdhc_set_uhs_signaling(strustatic void esdhc_reset (struct sdhci_host *host,u8 mask) { -sdhci_reset (host, mask); +sdhci_and_cqhci_reset (host, mask);sdhci_writel (host, host->ier,SDHCI_INT_ENABLE );sdhci_writel (host, host->ier,SDHCI_SIGNAL_ENABLE );
Greg Kroah-Hartman
maintainerPATCH 108/131 udf: Fix a slab-out-of-bounds write bug in udf_find_entry()
In reply to Greg Kroah-HartmanFrom: ZhangPeng <[email protected]>
commit c8af247de385ce49afabc3bf1cf4fd455c94bfe8 upstream.
Syzbot reported a slab-out-of-bounds Write bug:
loop0: detected capacity change from 0 to 2048
==================================================================
BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253 Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610 CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report+0xcd/0x100 mm/kasan/report.c:495 kasan_check_range+0x2a7/0x2e0 mm/kasan/generic.c:189 memcpy+0x3c/0x60 mm/kasan/shadow.c:66 udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253 udf_lookup+0xef/0x340 fs/udf/namei.c:309 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ffab0d164d9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe1a7e6bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffab0d164d9
RDX: 00007ffab0d164d9 RSI: 0000000000000000 RDI: 0000000020000180
RBP: 00007ffab0cd5a10 R08: 0000000000000000 R09: 0000000000000000
R10: 00005555573552c0 R11: 0000000000000246 R12: 00007ffab0cd5aa0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK> Allocated by task 3610: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x3d/0x60 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] __kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380 kmalloc include/linux/slab.h:576 [inline] udf_find_entry+0x7b6/0x14f0 fs/udf/namei.c:243 udf_lookup+0xef/0x340 fs/udf/namei.c:309 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff8880123ff800 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 150 bytes inside of
256-byte region [ffff8880123ff800, ffff8880123ff900)
The buggy address belongs to the physical page:
page:ffffea000048ff80 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x123fe
head:ffffea000048ff80 order:1 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 ffffea00004b8500 dead000000000003 ffff888012041b40 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0(), pid 1, tgid 1 (swapper/0), ts 1841222404, free_ts 0 create_dummy_stack mm/page_owner.c:67 [inline] register_early_stack+0x77/0xd0 mm/page_owner.c:83 init_page_owner+0x3a/0x731 mm/page_owner.c:93 kernel_init_freeable+0x41c/0x5d5 init/main.c:1629 kernel_init+0x19/0x2b0 init/main.c:1519
page_owner free stack trace missing
Memory state around the buggy address:
ffff8880123ff780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880123ff800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880123ff880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06
^
ffff8880123ff900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880123ff980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================Fix this by changing the memory size allocated for copy_name from UDF_NAME_LEN(254) to UDF_NAME_LEN_CS0(255), because the total length (lfi) of subsequent memcpy can be up to 255.
--- fs/udf/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/udf/namei.c +1 -1
@@ -240,7 +240,7 @@ static struct fileIdentDesc *udf_find_en poffset - lfi); else {if (!copy_name) { - copy_name =kmalloc (UDF_NAME_LEN , + copy_name =kmalloc (UDF_NAME_LEN_CS0 ,GFP_NOFS );if (!copy_name) { fi =ERR_PTR (-ENOMEM );
Greg Kroah-Hartman
maintainerPATCH 109/131 mm/damon/dbgfs: check if rm_contexts input is for a real context
In reply to Greg Kroah-HartmanFrom: SeongJae Park <[email protected]>
commit 1de09a7281edecfdba19b3a07417f6d65243ab5f upstream.
A user could write a name of a file under 'damon/' debugfs directory, which is not a user-created context, to 'rm_contexts' file. In the case, 'dbgfs_rm_context()' just assumes it's the valid DAMON context directory only if a file of the name exist. As a result, invalid memory access could happen as below. Fix the bug by checking if the given input is for a directory. This check can filter out non-context inputs because directories under 'damon/' debugfs directory can be created via only 'mk_contexts' file.
This bug has found by syzbot[1].
[1] https://lore.kernel.org/damon/[email protected]/
--- mm/damon/dbgfs.c | 7 +++++++ 1 file changed, 7 insertions(+)
mm/damon/dbgfs.c +7 -0
@@ -441,6 +441,7 @@ out:static int dbgfs_rm_context (char *name) {struct dentry *root, *dir, **new_dirs; +struct inode *inode;struct damon_ctx **new_ctxs;int i, j;int ret =0 ;
@@ -456,6 +457,12 @@ static int dbgfs_rm_context(char *name)if (!dir)return -ENOENT ; + inode =d_inode (dir); +if (!S_ISDIR (inode->i_mode)) { + ret = -EINVAL ; + goto out_dput; + } + new_dirs =kmalloc_array (dbgfs_nr_ctxs -1 ,sizeof (*dbgfs_dirs),GFP_KERNEL );if (!new_dirs) {
Greg Kroah-Hartman
maintainerPATCH 110/131 mm/memremap.c: map FS_DAX device memory as decrypted
In reply to Greg Kroah-HartmanFrom: Pankaj Gupta <[email protected]>
commit 867400af90f1f953ff9e10b1b87ecaf9369a7eb8 upstream.
virtio_pmem use devm_memremap_pages() to map the device memory. By default this memory is mapped as encrypted with SEV. Guest reboot changes the current encryption key and guest no longer properly decrypts the FSDAX device meta data.
Mark the corresponding device memory region for FSDAX devices (mapped with memremap_pages) as decrypted to retain the persistent memory property.
--- mm/memremap.c | 1 + 1 file changed, 1 insertion(+)
mm/memremap.c +1 -0
@@ -327,6 +327,7 @@ void *memremap_pages(struct dev_pagemapWARN (1 ,"File system DAX not supported\n" );return ERR_PTR (-EINVAL ); } + params.pgprot =pgprot_decrypted (params.pgprot);break ;case MEMORY_DEVICE_GENERIC :break ;
Greg Kroah-Hartman
maintainerPATCH 111/131 mm/shmem: use page_mapping() to detect page cache for uffd continue
In reply to Greg Kroah-HartmanFrom: Peter Xu <[email protected]>
commit 93b0d9178743a68723babe8448981f658aebc58e upstream.
mfill_atomic_install_pte() checks page->mapping to detect whether one page is used in the page cache. However as pointed out by Matthew, the page can logically be a tail page rather than always the head in the case of uffd minor mode with UFFDIO_CONTINUE. It means we could wrongly install one pte with shmem thp tail page assuming it's an anonymous page.
It's not that clear even for anonymous page, since normally anonymous pages also have page->mapping being setup with the anon vma. It's safe here only because the only such caller to mfill_atomic_install_pte() is always passing in a newly allocated page (mcopy_atomic_pte()), whose page->mapping is not yet setup. However that's not extremely obvious either.
For either of above, use page_mapping() instead.
--- mm/userfaultfd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
mm/userfaultfd.c +1 -1
@@ -63,7 +63,7 @@ int mfill_atomic_install_pte(struct mm_spte_t _dst_pte, *dst_pte;bool writable = dst_vma->vm_flags &VM_WRITE ;bool vm_shared = dst_vma->vm_flags &VM_SHARED ; -bool page_in_cache = page->mapping; +bool page_in_cache =page_mapping (page);spinlock_t *ptl;struct inode *inode;pgoff_t offset, max_off;
Greg Kroah-Hartman
maintainerPATCH 112/131 can: j1939: j1939_send_one(): fix missing CAN header initialization
In reply to Greg Kroah-HartmanFrom: Oliver Hartkopp <[email protected]>
commit 3eb3d283e8579a22b81dd2ac3987b77465b2a22f upstream.
The read access to struct canxl_frame::len inside of a j1939 created skbuff revealed a missing initialization of reserved and later filled elements in struct can_frame.
This patch initializes the 8 byte CAN header with zero.
--- net/can/j1939/main.c | 3 +++ 1 file changed, 3 insertions(+)
net/can/j1939/main.c +3 -0
@@ -332,6 +332,9 @@ int j1939_send_one(struct j1939_priv *pr/* re-claim the CAN_HDR from the SKB */ cf =skb_push (skb,J1939_CAN_HDR ); +/* initialize header structure */ +memset (cf,0 ,J1939_CAN_HDR ); +/* make it a full can frame again */ skb_put (skb,J1939_CAN_FTR + (8 - dlc));
Greg Kroah-Hartman
maintainerPATCH 95/131 ALSA: usb-audio: Add DSD support for Accuphase DAC-60
In reply to Greg Kroah-HartmanFrom: Jussi Laako <[email protected]>
commit 8cbd4725ffff3eface1f5f3397af02acad5b2831 upstream.
Accuphase DAC-60 option card supports native DSD up to DSD256, but doesn't have support for auto-detection. Explicitly enable DSD support for the correct altsetting.
--- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+)
sound/usb/quirks.c +1 -0
@@ -1611,6 +1611,7 @@ u64 snd_usb_interface_dsd_format_quirks(/* XMOS based USB DACs */ switch (chip->usb_id) {case USB_ID (0x1511 ,0x0037 ):/* AURALiC VEGA */ +case USB_ID (0x21ed ,0xd75a ):/* Accuphase DAC-60 option card */ case USB_ID (0x2522 ,0x0012 ):/* LH Labs VI DAC Infinity */ case USB_ID (0x2772 ,0x0230 ):/* Pro-Ject Pre Box S2 Digital */ if (fp->altsetting ==2 )
Greg Kroah-Hartman
maintainerPATCH 113/131 cert host tools: Stop complaining about deprecated OpenSSL functions
In reply to Greg Kroah-HartmanFrom: Linus Torvalds <[email protected]>
commit 6bfb56e93bcef41859c2d5ab234ffd80b691be35 upstream.
OpenSSL 3.0 deprecated the OpenSSL's ENGINE API. That is as may be, but the kernel build host tools still use it. Disable the warning about deprecated declarations until somebody who cares fixes it.
--- scripts/extract-cert.c | 7 +++++++ scripts/sign-file.c | 7 +++++++ 2 files changed, 14 insertions(+)
scripts/extract-cert.c +7 -0
@@ -23,6 +23,13 @@#include <openssl/err.h> #include <openssl/engine.h> +/* +* OpenSSL 3.0 deprecates the OpenSSL's ENGINE API. +* +* Remove this if/when that API is no longer used +*/ +#pragma GCC diagnostic ignored "-Wdeprecated-declarations" +#define PKEY_ID_PKCS7 2 static __attribute__((noreturn))
scripts/sign-file.c +7 -0
@@ -30,6 +30,13 @@#include <openssl/engine.h> /* +* OpenSSL 3.0 deprecates the OpenSSL's ENGINE API. +* +* Remove this if/when that API is no longer used +*/ +#pragma GCC diagnostic ignored "-Wdeprecated-declarations" + +/* * Use CMS if we have openssl-1.0.0 or newer available - otherwise we have to * assume that it's not available and its header file is missing and that we * should use PKCS#7 instead. Switching to the older PKCS#7 format restricts
Greg Kroah-Hartman
maintainerPATCH 114/131 dmaengine: at_hdmac: Fix at_lli struct definition
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit f1171bbdd2ba2a50ee64bb198a78c268a5baf5f1 upstream.
Those hardware registers are all of 32 bits, while dma_addr_t ca be of type u64 or u32 depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with what the hardware expects.
--- drivers/dma/at_hdmac_regs.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/dma/at_hdmac_regs.h +5 -5
@@ -186,13 +186,13 @@/* LLI == Linked List Item; aka DMA buffer descriptor */ struct at_lli {/* values that are not changed by hardware */ -dma_addr_t saddr; -dma_addr_t daddr; +u32 saddr; +u32 daddr;/* value that may get written back: */ -u32 ctrla; +u32 ctrla;/* more values that are not changed by hardware */ -u32 ctrlb; -dma_addr_t dscr;/* chain to next lli */ +u32 ctrlb; +u32 dscr;/* chain to next lli */ };/**
Greg Kroah-Hartman
maintainerPATCH 115/131 dmaengine: at_hdmac: Dont start transactions at tx_submit level
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit 7176a6a8982d311e50a7c1168868d26e65bbba19 upstream.
tx_submit is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending() to be called. issue_pending() must start the transfer, not tx_submit(), thus remove atc_dostart() from atc_tx_submit(). Clients of at_xdmac that assume that tx_submit() starts the transfer must be updated and call dma_async_issue_pending() if they miss to call it.
The vdbg print was moved to after the lock is released. It is desirable to do the prints without the lock held if possible, and because the if statement disappears there's no reason why to do the print while holding the lock.
--- drivers/dma/at_hdmac.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-)
drivers/dma/at_hdmac.c +3 -11
@@ -691,19 +691,11 @@ static dma_cookie_t atc_tx_submit(structspin_lock_irqsave (&atchan->lock, flags); cookie =dma_cookie_assign (tx); -if (list_empty (&atchan->active_list)) { -dev_vdbg (chan2dev (tx->chan),"tx_submit: started %u\n" , - desc->txd.cookie); -atc_dostart (atchan, desc); -list_add_tail (&desc->desc_node, &atchan->active_list); - }else { -dev_vdbg (chan2dev (tx->chan),"tx_submit: queued %u\n" , - desc->txd.cookie); -list_add_tail (&desc->desc_node, &atchan->queue); - } - +list_add_tail (&desc->desc_node, &atchan->queue);spin_unlock_irqrestore (&atchan->lock, flags); +dev_vdbg (chan2dev (tx->chan),"tx_submit: queued %u\n" , + desc->txd.cookie);return cookie; }
Greg Kroah-Hartman
maintainerPATCH 116/131 dmaengine: at_hdmac: Start transfer for cyclic channels in issue_pending
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit 8a47221fc28417ff8a32a4f92d4448a56c3cf7e1 upstream.
Cyclic channels must too call issue_pending in order to start a transfer. Start the transfer in issue_pending regardless of the type of channel. This wrongly worked before, because in the past the transfer was started at tx_submit level when only a desc in the transfer list.
--- drivers/dma/at_hdmac.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/dma/at_hdmac.c +0 -4
@@ -1528,10 +1528,6 @@ static void atc_issue_pending(struct dmadev_vdbg (chan2dev (chan),"issue_pending\n" ); -/* Not needed for cyclic transfers */ -if (atc_chan_is_cyclic (atchan)) -return ; -atc_advance_work (atchan); }
Greg Kroah-Hartman
maintainerPATCH 117/131 dmaengine: at_hdmac: Fix premature completion of desc in issue_pending
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit fcd37565efdaffeac179d0f0ce980ac79bfdf569 upstream.
Multiple calls to atc_issue_pending() could result in a premature completion of a descriptor from the atchan->active list, as the method always completed the first active descriptor from the list. Instead, issue_pending() should just take the first transaction descriptor from the pending queue, move it to active_list and start the transfer.
--- drivers/dma/at_hdmac.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
drivers/dma/at_hdmac.c +13 -3
@@ -1519,16 +1519,26 @@ atc_tx_status(struct dma_chan *chan, }/** -* atc_issue_pending - try to finish work +* atc_issue_pending - takes the first transaction descriptor in the pending +* queue and starts the transfer. * @chan: target DMA channel */ static void atc_issue_pending (struct dma_chan *chan) { -struct at_dma_chan *atchan =to_at_dma_chan (chan); +struct at_dma_chan *atchan =to_at_dma_chan (chan); +struct at_desc *desc; +unsigned long flags;dev_vdbg (chan2dev (chan),"issue_pending\n" ); -atc_advance_work (atchan); +spin_lock_irqsave (&atchan->lock, flags); +if (atc_chan_is_enabled (atchan) ||list_empty (&atchan->queue)) +return spin_unlock_irqrestore (&atchan->lock, flags); + + desc =atc_first_queued (atchan); +list_move_tail (&desc->desc_node, &atchan->active_list); +atc_dostart (atchan, desc); +spin_unlock_irqrestore (&atchan->lock, flags); }/**
Greg Kroah-Hartman
maintainerPATCH 118/131 dmaengine: at_hdmac: Do not call the complete callback on device_terminate_all
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit f645f85ae1104f8bd882f962ac0a69a1070076dd upstream.
The method was wrong because it violated the dmaengine API. For aborted transfers the complete callback should not be called. Fix the behavior and do not call the complete callback on device_terminate_all.
--- drivers/dma/at_hdmac.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)
drivers/dma/at_hdmac.c +2 -9
@@ -1429,11 +1429,8 @@ static int atc_terminate_all(struct dma_struct at_dma_chan *atchan =to_at_dma_chan (chan);struct at_dma *atdma =to_at_dma (chan->device);int chan_id = atchan->chan_common.chan_id; -struct at_desc *desc, *_desc;unsigned long flags; -LIST_HEAD (list); -dev_vdbg (chan2dev (chan),"%s\n" , __func__);/*
@@ -1452,15 +1449,11 @@ static int atc_terminate_all(struct dma_cpu_relax ();/* active_list entries will end up before queued entries */ -list_splice_init (&atchan->queue, &list); -list_splice_init (&atchan->active_list, &list); +list_splice_tail_init (&atchan->queue, &atchan->free_list); +list_splice_tail_init (&atchan->active_list, &atchan->free_list);spin_unlock_irqrestore (&atchan->lock, flags); -/* Flush all pending and queued descriptors */ -list_for_each_entry_safe (desc, _desc, &list, desc_node) -atc_chain_complete (atchan, desc); -clear_bit (ATC_IS_PAUSED , &atchan->status);/* if channel dedicated to cyclic operations, free it */ clear_bit (ATC_IS_CYCLIC , &atchan->status);
Greg Kroah-Hartman
maintainerPATCH 119/131 dmaengine: at_hdmac: Protect atchan->status with the channel lock
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit 6e5ad28d16f082efeae3d0bd2e31f24bed218019 upstream.
Now that the complete callback call was removed from device_terminate_all(), we can protect the atchan->status with the channel lock. The atomic bitops on atchan->status do not substitute proper locking on the status, as one could still modify the status after the lock was dropped in atc_terminate_all() but before the atomic bitops were executed.
--- drivers/dma/at_hdmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dma/at_hdmac.c +2 -2
@@ -1452,12 +1452,12 @@ static int atc_terminate_all(struct dma_list_splice_tail_init (&atchan->queue, &atchan->free_list);list_splice_tail_init (&atchan->active_list, &atchan->free_list); -spin_unlock_irqrestore (&atchan->lock, flags); -clear_bit (ATC_IS_PAUSED , &atchan->status);/* if channel dedicated to cyclic operations, free it */ clear_bit (ATC_IS_CYCLIC , &atchan->status); +spin_unlock_irqrestore (&atchan->lock, flags); +return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 120/131 dmaengine: at_hdmac: Fix concurrency problems by removing atc_complete_all()
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit c6babed879fbe82796a601bf097649e07382db46 upstream.
atc_complete_all() had concurrency bugs, thus remove it:
1/ atc_complete_all() in its entirety was buggy, as when the atchan->queue list (the one that contains descriptors that are not yet issued to the hardware) contained descriptors, it fired just the first from the atchan->queue, but moved all the desc from atchan->queue to atchan->active_list and considered them all as fired. This could result in calling the completion of a descriptor that was not yet issued to the hardware.
2/ when in tasklet at atc_advance_work() time, atchan->active_list was queried without holding the lock of the chan. This can result in atchan->active_list concurrency problems between the tasklet and issue_pending().
--- drivers/dma/at_hdmac.c | 49 ++++--------------------------------------------- 1 file changed, 4 insertions(+), 45 deletions(-)
drivers/dma/at_hdmac.c +4 -45
@@ -486,67 +486,26 @@ atc_chain_complete(struct at_dma_chan *a }/** -* atc_complete_all - finish work for all transactions -* @atchan: channel to complete transactions for -* -* Eventually submit queued descriptors if any -* -* Assume channel is idle while calling this function -* Called with atchan->lock held and bh disabled -*/ -static void atc_complete_all (struct at_dma_chan *atchan) -{ -struct at_desc *desc, *_desc; -LIST_HEAD (list); -unsigned long flags; - -dev_vdbg (chan2dev (&atchan->chan_common),"complete all\n" ); - -spin_lock_irqsave (&atchan->lock, flags); - -/* -* Submit queued descriptors ASAP, i.e. before we go through -* the completed ones. -*/ -if (!list_empty (&atchan->queue)) -atc_dostart (atchan,atc_first_queued (atchan)); -/* empty active_list now it is completed */ -list_splice_init (&atchan->active_list, &list); -/* empty queue list by moving descriptors (if any) to active_list */ -list_splice_init (&atchan->queue, &atchan->active_list); - -spin_unlock_irqrestore (&atchan->lock, flags); - -list_for_each_entry_safe (desc, _desc, &list, desc_node) -atc_chain_complete (atchan, desc); -} - -/** * atc_advance_work - at the end of a transaction, move forward * @atchan: channel where the transaction ended */ static void atc_advance_work (struct at_dma_chan *atchan) {unsigned long flags; -int ret;dev_vdbg (chan2dev (&atchan->chan_common),"advance_work\n" );spin_lock_irqsave (&atchan->lock, flags); - ret =atc_chan_is_enabled (atchan); +if (atc_chan_is_enabled (atchan) ||list_empty (&atchan->active_list)) +return spin_unlock_irqrestore (&atchan->lock, flags);spin_unlock_irqrestore (&atchan->lock, flags); -if (ret) -return ; - -if (list_empty (&atchan->active_list) || -list_is_singular (&atchan->active_list)) -return atc_complete_all (atchan);atc_chain_complete (atchan,atc_first_active (atchan));/* advance work */ spin_lock_irqsave (&atchan->lock, flags); -atc_dostart (atchan,atc_first_active (atchan)); +if (!list_empty (&atchan->active_list)) +atc_dostart (atchan,atc_first_active (atchan));spin_unlock_irqrestore (&atchan->lock, flags); }
Greg Kroah-Hartman
maintainerPATCH 121/131 dmaengine: at_hdmac: Fix concurrency over descriptor
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit 06988949df8c3007ad82036d3606d8ae72ed9000 upstream.
The descriptor was added to the free_list before calling the callback, which could result in reissuing of the same descriptor and calling of a single callback for both. Move the decriptor to the free list after the callback is invoked.
--- drivers/dma/at_hdmac.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
drivers/dma/at_hdmac.c +9 -5
@@ -469,11 +469,8 @@ atc_chain_complete(struct at_dma_chan *a desc->memset_buffer = false; } -/* move children to free_list */ -list_splice_init (&desc->tx_list, &atchan->free_list); -/* move myself to free_list */ -list_move (&desc->desc_node, &atchan->free_list); - +/* Remove transfer node from the active list. */ +list_del_init (&desc->desc_node);spin_unlock_irqrestore (&atchan->lock, flags);dma_descriptor_unmap (txd);
@@ -483,6 +480,13 @@ atc_chain_complete(struct at_dma_chan *admaengine_desc_get_callback_invoke (txd,NULL );dma_run_dependencies (txd); + +spin_lock_irqsave (&atchan->lock, flags); +/* move children to free_list */ +list_splice_init (&desc->tx_list, &atchan->free_list); +/* add myself to free_list */ +list_add (&desc->desc_node, &atchan->free_list); +spin_unlock_irqrestore (&atchan->lock, flags); }/**
Greg Kroah-Hartman
maintainerPATCH 122/131 dmaengine: at_hdmac: Free the memset buf without holding the chan lock
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit 6ba826cbb57d675f447b59323204d1473bbd5593 upstream.
There's no need to hold the channel lock when freeing the memset buf, as the operation has already completed. Free the memset buf without holding the channel lock.
--- drivers/dma/at_hdmac.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/dma/at_hdmac.c +7 -7
@@ -462,13 +462,6 @@ atc_chain_complete(struct at_dma_chan *aif (!atc_chan_is_cyclic (atchan))dma_cookie_complete (txd); -/* If the transfer was a memset, free our temporary buffer */ -if (desc->memset_buffer) { -dma_pool_free (atdma->memset_pool, desc->memset_vaddr, - desc->memset_paddr); - desc->memset_buffer = false; - } -/* Remove transfer node from the active list. */ list_del_init (&desc->desc_node);spin_unlock_irqrestore (&atchan->lock, flags);
@@ -487,6 +480,13 @@ atc_chain_complete(struct at_dma_chan *a/* add myself to free_list */ list_add (&desc->desc_node, &atchan->free_list);spin_unlock_irqrestore (&atchan->lock, flags); + +/* If the transfer was a memset, free our temporary buffer */ +if (desc->memset_buffer) { +dma_pool_free (atdma->memset_pool, desc->memset_vaddr, + desc->memset_paddr); + desc->memset_buffer = false; + } }/**
Greg Kroah-Hartman
maintainerPATCH 96/131 vmlinux.lds.h: Fix placement of .data..decrypted section
In reply to Greg Kroah-HartmanFrom: Nathan Chancellor <[email protected]>
commit 000f8870a47bdc36730357883b6aef42bced91ee upstream.
Commit d4c639990036 ("vmlinux.lds.h: Avoid orphan section with !SMP") fixed an orphan section warning by adding the '.data..decrypted' section to the linker script under the PERCPU_DECRYPTED_SECTION define but that placement introduced a panic with !SMP, as the percpu sections are not instantiated with that configuration so attempting to access variables defined with DEFINE_PER_CPU_DECRYPTED() will result in a page fault.
Move the '.data..decrypted' section to the DATA_MAIN define so that the variables in it are properly instantiated at boot time with CONFIG_SMP=n.
--- include/asm-generic/vmlinux.lds.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/asm-generic/vmlinux.lds.h +1 -1
@@ -337,6 +337,7 @@#define DATA_DATA \ *(.xiptext) \ *(DATA_MAIN) \ + *(.data..decrypted) \ *(.ref.data) \ *(.data..shared_aligned)/* percpu related */ \ MEM_KEEP(init.data*) \
@@ -969,7 +970,6 @@#ifdef CONFIG_AMD_MEM_ENCRYPT #define PERCPU_DECRYPTED_SECTION \ . = ALIGN(PAGE_SIZE); \ - *(.data..decrypted) \ *(.data..percpu..decrypted) \ . = ALIGN(PAGE_SIZE);#else
Greg Kroah-Hartman
maintainerPATCH 123/131 dmaengine: at_hdmac: Fix concurrency over the active list
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit 03ed9ba357cc78116164b90b87f45eacab60b561 upstream.
The tasklet (atc_advance_work()) did not held the channel lock when retrieving the first active descriptor, causing concurrency problems if issue_pending() was called in between. If issue_pending() was called exactly after the lock was released in the tasklet (atc_advance_work()), atc_chain_complete() could complete a descriptor for which the controller has not yet raised an interrupt.
--- drivers/dma/at_hdmac.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/dma/at_hdmac.c +6 -4
@@ -462,8 +462,6 @@ atc_chain_complete(struct at_dma_chan *aif (!atc_chan_is_cyclic (atchan))dma_cookie_complete (txd); -/* Remove transfer node from the active list. */ -list_del_init (&desc->desc_node);spin_unlock_irqrestore (&atchan->lock, flags);dma_descriptor_unmap (txd);
@@ -495,6 +493,7 @@ atc_chain_complete(struct at_dma_chan *a*/ static void atc_advance_work (struct at_dma_chan *atchan) { +struct at_desc *desc;unsigned long flags;dev_vdbg (chan2dev (&atchan->chan_common),"advance_work\n" );
@@ -502,9 +501,12 @@ static void atc_advance_work(struct at_dspin_lock_irqsave (&atchan->lock, flags);if (atc_chan_is_enabled (atchan) ||list_empty (&atchan->active_list))return spin_unlock_irqrestore (&atchan->lock, flags); -spin_unlock_irqrestore (&atchan->lock, flags); -atc_chain_complete (atchan,atc_first_active (atchan)); + desc =atc_first_active (atchan); +/* Remove the transfer node from the active list. */ +list_del_init (&desc->desc_node); +spin_unlock_irqrestore (&atchan->lock, flags); +atc_chain_complete (atchan, desc);/* advance work */ spin_lock_irqsave (&atchan->lock, flags);
Greg Kroah-Hartman
maintainerPATCH 124/131 dmaengine: at_hdmac: Fix descriptor handling when issuing it to hardware
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit ba2423633ba646e1df20e30cb3cf35495c16f173 upstream.
As it was before, the descriptor was issued to the hardware without adding it to the active (issued) list. This could result in a completion of other descriptor, or/and in the descriptor never being completed.
--- drivers/dma/at_hdmac.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/dma/at_hdmac.c +11 -4
@@ -510,8 +510,11 @@ static void atc_advance_work(struct at_d/* advance work */ spin_lock_irqsave (&atchan->lock, flags); -if (!list_empty (&atchan->active_list)) -atc_dostart (atchan,atc_first_active (atchan)); +if (!list_empty (&atchan->active_list)) { + desc =atc_first_queued (atchan); +list_move_tail (&desc->desc_node, &atchan->active_list); +atc_dostart (atchan, desc); + }spin_unlock_irqrestore (&atchan->lock, flags); }
@@ -523,6 +526,7 @@ static void atc_advance_work(struct at_dstatic void atc_handle_error (struct at_dma_chan *atchan) {struct at_desc *bad_desc; +struct at_desc *desc;struct at_desc *child;unsigned long flags;
@@ -540,8 +544,11 @@ static void atc_handle_error(struct at_dlist_splice_init (&atchan->queue, atchan->active_list.prev);/* Try to restart the controller */ -if (!list_empty (&atchan->active_list)) -atc_dostart (atchan,atc_first_active (atchan)); +if (!list_empty (&atchan->active_list)) { + desc =atc_first_queued (atchan); +list_move_tail (&desc->desc_node, &atchan->active_list); +atc_dostart (atchan, desc); + }/* * KERN_CRITICAL may seem harsh, but since this only happens
Greg Kroah-Hartman
maintainerPATCH 125/131 dmaengine: at_hdmac: Fix completion of unissued descriptor in case of errors
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit ef2cb4f0ce479f77607b04c4b0414bf32f863ee8 upstream.
In case the controller detected an error, the code took the chance to move all the queued (submitted) descriptors to the active (issued) list. This was wrong as if there were any descriptors in the submitted list they were moved to the issued list without actually issuing them to the controller, thus a completion could be raised without even fireing the descriptor.
--- drivers/dma/at_hdmac.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/dma/at_hdmac.c +0 -4
@@ -539,10 +539,6 @@ static void atc_handle_error(struct at_d bad_desc =atc_first_active (atchan);list_del_init (&bad_desc->desc_node); -/* As we are stopped, take advantage to push queued descriptors -* in active_list */ -list_splice_init (&atchan->queue, atchan->active_list.prev); -/* Try to restart the controller */ if (!list_empty (&atchan->active_list)) { desc =atc_first_queued (atchan);
Greg Kroah-Hartman
maintainerPATCH 97/131 ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure
In reply to Greg Kroah-HartmanFrom: Shin'ichiro Kawasaki <[email protected]>
commit ea045fd344cb15c164e9ffc8b8cffb6883df8475 upstream.
SAT SCSI/ATA Translation specification requires SCSI SYNCHRONIZE CACHE
(10) and (16) commands both shall be translated to ATA flush command. Also, ZBC Zoned Block Commands specification mandates SYNCHRONIZE CACHE
(16) command support. However, libata translates only SYNCHRONIZE CACHE (10). This results in SYNCHRONIZE CACHE (16) command failures on SATA drives and then libata translation does not conform to ZBC. To avoid the failure, add support for SYNCHRONIZE CACHE (16).
--- drivers/ata/libata-scsi.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/ata/libata-scsi.c +3 -0
@@ -3259,6 +3259,7 @@ static unsigned int ata_scsiop_maint_in(case REPORT_LUNS :case REQUEST_SENSE :case SYNCHRONIZE_CACHE : +case SYNCHRONIZE_CACHE_16 :case REZERO_UNIT :case SEEK_6 :case SEEK_10 :
@@ -3925,6 +3926,7 @@ static inline ata_xlat_func_t ata_get_xlreturn ata_scsi_write_same_xlat;case SYNCHRONIZE_CACHE : +case SYNCHRONIZE_CACHE_16 :if (ata_try_flush_cache (dev))return ata_scsi_flush_xlat;break ;
@@ -4170,6 +4172,7 @@ void ata_scsi_simulate(struct ata_device* turning this into a no-op. */ case SYNCHRONIZE_CACHE : +case SYNCHRONIZE_CACHE_16 : fallthrough;/* no-op's, complete with success */
Greg Kroah-Hartman
maintainerPATCH 98/131 nilfs2: fix deadlock in nilfs_count_free_blocks()
In reply to Greg Kroah-HartmanFrom: Ryusuke Konishi <[email protected]>
commit 8ac932a4921a96ca52f61935dbba64ea87bbd5dc upstream.
A semaphore deadlock can occur if nilfs_get_block() detects metadata corruption while locating data blocks and a superblock writeback occurs at the same time:
task 1 task 2
------ ------
* A file operation *nilfs_truncate()
nilfs_get_block()
down_read(rwsem A) <--
nilfs_bmap_lookup_contig()
... generic_shutdown_super()
nilfs_put_super()
* Prepare to write superblock *
down_write(rwsem B) <--
nilfs_cleanup_super()
* Detect b-tree corruption * nilfs_set_log_cursor()
nilfs_bmap_convert_error() nilfs_count_free_blocks()
__nilfs_error() down_read(rwsem A) <--
nilfs_set_error()
down_write(rwsem B) <--
*** DEADLOCK ***Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem) and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata corruption, __nilfs_error() is called from nilfs_bmap_convert_error() inside the lock section.
Since __nilfs_error() calls nilfs_set_error() unless the filesystem is read-only and nilfs_set_error() attempts to writelock rwsem B (= nilfs->ns_sem) to write back superblock exclusively, hierarchical lock acquisition occurs in the order rwsem A -> rwsem B.
Now, if another task starts updating the superblock, it may writelock rwsem B during the lock sequence above, and can deadlock trying to readlock rwsem A in nilfs_count_free_blocks().
However, there is actually no need to take rwsem A in nilfs_count_free_blocks() because it, within the lock section, only reads a single integer data on a shared struct with nilfs_sufile_get_ncleansegs(). This has been the case after commit aa474a220180 ("nilfs2: add local variable to cache the number of clean segments"), that is, even before this bug was introduced.
So, this resolves the deadlock problem by just not taking the semaphore in nilfs_count_free_blocks().
--- fs/nilfs2/the_nilfs.c | 2 -- 1 file changed, 2 deletions(-)
fs/nilfs2/the_nilfs.c +0 -2
@@ -690,9 +690,7 @@ int nilfs_count_free_blocks(struct the_n {unsigned long ncleansegs; -down_read (&NILFS_MDT (nilfs->ns_dat)->mi_sem); ncleansegs =nilfs_sufile_get_ncleansegs (nilfs->ns_sufile); -up_read (&NILFS_MDT (nilfs->ns_dat)->mi_sem); *nblocks = (sector_t )ncleansegs * nilfs->ns_blocks_per_segment;return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 99/131 nilfs2: fix use-after-free bug of ns_writer on remount
In reply to Greg Kroah-HartmanFrom: Ryusuke Konishi <[email protected]>
commit 8cccf05fe857a18ee26e20d11a8455a73ffd4efd upstream.
If a nilfs2 filesystem is downgraded to read-only due to metadata corruption on disk and is remounted read/write, or if emergency read-only remount is performed, detaching a log writer and synchronizing the filesystem can be done at the same time.
In these cases, use-after-free of the log writer (hereinafter nilfs->ns_writer) can happen as shown in the scenario below:
Task1 Task2
-------------------------------- ------------------------------
nilfs_construct_segment
nilfs_segctor_sync
init_wait
init_waitqueue_entry
add_wait_queue
schedule
nilfs_remount (R/W remount case)
nilfs_attach_log_writer
nilfs_detach_log_writer
nilfs_segctor_destroy
kfree
finish_wait
_raw_spin_lock_irqsave
__raw_spin_lock_irqsave
do_raw_spin_lock
debug_spin_lock_before <-- use-after-free
While Task1 is sleeping, nilfs->ns_writer is freed by Task2. After Task1 waked up, Task1 accesses nilfs->ns_writer which is already freed. This scenario diagram is based on the Shigeru Yoshida's post [1].
This patch fixes the issue by not detaching nilfs->ns_writer on remount so that this UAF race doesn't happen. Along with this change, this patch also inserts a few necessary read-only checks with superblock instance where only the ns_writer pointer was used to check if the filesystem is read-only.
--- fs/nilfs2/segment.c | 15 ++++++++------- fs/nilfs2/super.c | 2 -- 2 files changed, 8 insertions(+), 9 deletions(-)
fs/nilfs2/segment.c +8 -7
@@ -317,7 +317,7 @@ void nilfs_relax_pressure_in_lock(structstruct the_nilfs *nilfs = sb->s_fs_info;struct nilfs_sc_info *sci = nilfs->ns_writer; -if (!sci || !sci->sc_flush_request) +if (sb_rdonly (sb) ||unlikely (!sci) || !sci->sc_flush_request)return ;set_bit (NILFS_SC_PRIOR_FLUSH , &sci->sc_flags);
@@ -2243,7 +2243,7 @@ int nilfs_construct_segment(struct superstruct nilfs_transaction_info *ti;int err; -if (!sci) +if (sb_rdonly (sb) ||unlikely (!sci))return -EROFS ;/* A call inside transactions causes a deadlock. */
@@ -2282,7 +2282,7 @@ int nilfs_construct_dsync_segment(structstruct nilfs_transaction_info ti;int err =0 ; -if (!sci) +if (sb_rdonly (sb) ||unlikely (!sci))return -EROFS ;nilfs_transaction_lock (sb, &ti,0 );
@@ -2778,11 +2778,12 @@ int nilfs_attach_log_writer(struct superif (nilfs->ns_writer) {/* -* This happens if the filesystem was remounted -* read/write after nilfs_error degenerated it into a -* read-only mount. +* This happens if the filesystem is made read-only by +* __nilfs_error or nilfs_remount and then remounted +* read/write. In these cases, reuse the existing +* writer. */ -nilfs_detach_log_writer (sb); +return 0 ; } nilfs->ns_writer =nilfs_segctor_new (sb, root);
fs/nilfs2/super.c +0 -2
@@ -1133,8 +1133,6 @@ static int nilfs_remount(struct super_blif ((bool )(*flags &SB_RDONLY ) ==sb_rdonly (sb)) goto out;if (*flags &SB_RDONLY ) { -/* Shutting down log writer */ -nilfs_detach_log_writer (sb); sb->s_flags |=SB_RDONLY ;/*
Greg Kroah-Hartman
maintainerPATCH 100/131 drm/i915/dmabuf: fix sg_table handling in map_dma_buf
In reply to Greg Kroah-HartmanFrom: Matthew Auld <[email protected]>
commit f90daa975911961b65070ec72bd7dd8d448f9ef7 upstream.
We need to iterate over the original entries here for the sg_table, pulling out the struct page for each one, to be remapped. However currently this incorrectly iterates over the final dma mapped entries, which is likely just one gigantic sg entry if the iommu is enabled, leading to us only mapping the first struct page (and any physically contiguous pages following it), even if there is potentially lots more data to follow.
--- drivers/gpu/drm/i915/gem/i915_gem_dmabuf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/gem/i915_gem_dmabuf.c +2 -2
@@ -34,13 +34,13 @@ static struct sg_table *i915_gem_map_dma goto err; } - ret =sg_alloc_table (st, obj->mm.pages->nents,GFP_KERNEL ); + ret =sg_alloc_table (st, obj->mm.pages->orig_nents,GFP_KERNEL );if (ret) goto err_free; src = obj->mm.pages->sgl; dst = st->sgl; -for (i =0 ; i < obj->mm.pages->nents; i++) { +for (i =0 ; i < obj->mm.pages->orig_nents; i++) {sg_set_page (dst,sg_page (src), src->length,0 ); dst =sg_next (dst); src =sg_next (src);
Greg Kroah-Hartman
maintainerPATCH 101/131 drm/amdgpu: disable BACO on special BEIGE_GOBY card
In reply to Greg Kroah-HartmanFrom: Guchun Chen <[email protected]>
commit 0c85c067c9d9d7a1b2cc2e01a236d5d0d4a872b5 upstream.
Still avoid intermittent failure.
--- drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c +3 -1
@@ -366,7 +366,9 @@ static void sienna_cichlid_check_bxco_suif (((adev->pdev->device ==0x73A1 ) && (adev->pdev->revision ==0x00 )) || ((adev->pdev->device ==0x73BF ) && - (adev->pdev->revision ==0xCF ))) + (adev->pdev->revision ==0xCF )) || + ((adev->pdev->device ==0x7422 ) && + (adev->pdev->revision ==0x00 ))) smu_baco->platform_support = false; }
Greg Kroah-Hartman
maintainerPATCH 102/131 platform/x86: hp_wmi: Fix rfkill causing soft blocked wifi
In reply to Greg Kroah-HartmanFrom: Jorge Lopez <[email protected]>
commit 1598bfa8e1faa932de42e1ee7628a1c4c4263f0a upstream.
After upgrading BIOS to U82 01.02.01 Rev.A, the console is flooded strange char "^@" which printed out every second and makes login nearly impossible. Also the below messages were shown both in console and journal/dmesg every second:
usb 1-3: Device not responding to setup address. usb 1-3: device not accepting address 4, error -71 usb 1-3: device descriptor read/all, error -71 usb usb1-port3: unable to enumerate USB device
Wifi is soft blocked by checking rfkill. When unblocked manually, after few seconds it would be soft blocked again. So I was suspecting something triggered rfkill to soft block wifi. At the end it was fixed by removing hp_wmi module.
The root cause is the way hp-wmi driver handles command 1B on post-2009 BIOS. In pre-2009 BIOS, command 1Bh return 0x4 to indicate that BIOS no longer controls the power for the wireless devices.
--- drivers/platform/x86/hp-wmi.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/platform/x86/hp-wmi.c +10 -2
@@ -984,8 +984,16 @@ static int __init hp_wmi_bios_setup(stru wwan_rfkill =NULL ; rfkill2_count =0 ; -if (hp_wmi_rfkill_setup (device)) -hp_wmi_rfkill2_setup (device); +/* +* In pre-2009 BIOS, command 1Bh return 0x4 to indicate that +* BIOS no longer controls the power for the wireless +* devices. All features supported by this command will no +* longer be supported. +*/ +if (!hp_wmi_bios_2009_later ()) { +if (hp_wmi_rfkill_setup (device)) +hp_wmi_rfkill2_setup (device); + }thermal_profile_setup ();
Greg Kroah-Hartman
maintainerPATCH 93/131 ALSA: usb-audio: Yet more regression for for the delayed card registration
In reply to Greg Kroah-HartmanFrom: Takashi Iwai <[email protected]>
commit 971cb608d1c5d95533a43b549bb8ec9637f10043 upstream.
Although we tried to fix the regression for the recent changes with the delayed card registration, it doesn't seem covering the all cases; e.g. on Roland EDIROL M-100FX, where the generic quirk for Roland devices is applied, it misses the card registration because the detection of the last interface (apparently for MIDI) fails.
This patch is an attempt to recover from those failures by calling the card register also at the error path for the secondary interfaces. The card register condition is also extended to match with the old check in the previous patch, too (i.e. the simple check of the interface number) for catching the probe with errors.
--- sound/usb/card.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-)
sound/usb/card.c +20 -9
@@ -741,6 +741,18 @@ get_alias_quirk(struct usb_device *dev,return NULL ; } +/* register card if we reach to the last interface or to the specified +* one given via option +*/ +static int try_to_register_card (struct snd_usb_audio *chip,int ifnum) +{ +if (check_delayed_register_option (chip) == ifnum || + chip->last_iface == ifnum || +usb_interface_claimed (usb_ifnum_to_if (chip->dev, chip->last_iface))) +return snd_card_register (chip->card); +return 0 ; +} +/* * probe the active usb device *
@@ -879,15 +891,9 @@ static int usb_audio_probe(struct usb_in chip->need_delayed_register = false;/* clear again */ } -/* register card if we reach to the last interface or to the specified -* one given via option -*/ -if (check_delayed_register_option (chip) == ifnum || -usb_interface_claimed (usb_ifnum_to_if (dev, chip->last_iface))) { - err =snd_card_register (chip->card); -if (err <0 ) - goto __error; - } + err =try_to_register_card (chip, ifnum); +if (err <0 ) + goto __error_no_register;if (chip->quirk_flags &QUIRK_FLAG_SHARE_MEDIA_DEVICE ) {/* don't want to fail when snd_media_device_create() fails */
@@ -906,6 +912,11 @@ static int usb_audio_probe(struct usb_inreturn 0 ; __error: +/* in the case of error in secondary interface, still try to register */ +if (chip) +try_to_register_card (chip, ifnum); + + __error_no_register:if (chip) {/* chip->active is inside the chip->card object, * decrement before memory is possibly returned.
Greg Kroah-Hartman
maintainerPATCH 127/131 dmaengine: at_hdmac: Fix impossible condition
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit 28cbe5a0a46a6637adbda52337d7b2777fc04027 upstream.
The iterator can not be greater than ATC_MAX_DSCR_TRIALS, as the for loop will stop when i == ATC_MAX_DSCR_TRIALS. While here, use the common "i" name for the iterator.
--- drivers/dma/at_hdmac.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/dma/at_hdmac.c +4 -3
@@ -318,7 +318,8 @@ static int atc_get_bytes_left(struct dmastruct at_desc *desc_first =atc_first_active (atchan);struct at_desc *desc;int ret; -u32 ctrla, dscr, trials; +u32 ctrla, dscr; +unsigned int i;/* * If the cookie doesn't match to the currently running transfer then
@@ -388,7 +389,7 @@ static int atc_get_bytes_left(struct dma dscr =channel_readl (atchan,DSCR );rmb ();/* ensure DSCR is read before CTRLA */ ctrla =channel_readl (atchan,CTRLA ); -for (trials =0 ; trials <ATC_MAX_DSCR_TRIALS ; ++trials) { +for (i =0 ; i <ATC_MAX_DSCR_TRIALS ; ++i) {u32 new_dscr;rmb ();/* ensure DSCR is read after CTRLA */
@@ -414,7 +415,7 @@ static int atc_get_bytes_left(struct dmarmb ();/* ensure DSCR is read before CTRLA */ ctrla =channel_readl (atchan,CTRLA ); } -if (unlikely (trials >=ATC_MAX_DSCR_TRIALS )) +if (unlikely (i ==ATC_MAX_DSCR_TRIALS ))return -ETIMEDOUT ;/* for the first descriptor we can be more accurate */
Greg Kroah-Hartman
maintainerPATCH 128/131 dmaengine: at_hdmac: Check return code of dma_async_device_register
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit c47e6403fa099f200868d6b106701cb42d181d2b upstream.
dma_async_device_register() can fail, check the return code and display an error.
--- drivers/dma/at_hdmac.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/dma/at_hdmac.c +6 -1
@@ -1920,7 +1920,11 @@ static int __init at_dma_probe(struct pldma_has_cap (DMA_SLAVE , atdma->dma_common.cap_mask) ?"slave " :"" , plat_dat->nr_channels); -dma_async_device_register (&atdma->dma_common); + err =dma_async_device_register (&atdma->dma_common); +if (err) { +dev_err (&pdev->dev,"Unable to register: %d.\n" , err); + goto err_dma_async_device_register; + }/* * Do not return an error if the dmac node is not present in order to
@@ -1940,6 +1944,7 @@ static int __init at_dma_probe(struct pl err_of_dma_controller_register:dma_async_device_unregister (&atdma->dma_common); +err_dma_async_device_register:dma_pool_destroy (atdma->memset_pool); err_memset_pool_create:dma_pool_destroy (atdma->dma_desc_pool);
Greg Kroah-Hartman
maintainerPATCH 129/131 marvell: octeontx2: build error: unknown type name u64
In reply to Greg Kroah-HartmanFrom: Anders Roxell <[email protected]>
commit 6312d52838b21f5c4a5afa1269a00df4364fd354 upstream.
Building an allmodconfig kernel arm64 kernel, the following build error shows up:
In file included from drivers/crypto/marvell/octeontx2/cn10k_cpt.c:4:include/linux/soc/marvell/octeontx2/asm.h:38:15: error: unknown type name 'u64'
38 | static inline u64 otx2_atomic64_fetch_add(u64 incr, u64 *ptr)
| ^~~
Include linux/types.h in asm.h so the compiler knows what the type 'u64' are.
--- include/linux/soc/marvell/octeontx2/asm.h | 1 + 1 file changed, 1 insertion(+)
include/linux/soc/marvell/octeontx2/asm.h +1 -0
@@ -5,6 +5,7 @@#ifndef __SOC_OTX2_ASM_H#define __SOC_OTX2_ASM_H +#include <linux/types.h> #if defined(CONFIG_ARM64 )/* * otx2_lmt_flush is used for LMT store operation.
Greg Kroah-Hartman
maintainerPATCH 130/131 drm/amdkfd: Migrate in CPU page fault use current mm
In reply to Greg Kroah-HartmanFrom: Philip Yang <[email protected]>
commit 3a876060892ba52dd67d197c78b955e62657d906 upstream.
migrate_vma_setup shows below warning because we don't hold another process mm mmap_lock. We should use current vmf->vma->vm_mm instead, the caller already hold current mmap lock inside CPU page fault handler.
WARNING: CPU: 10 PID: 3054 at include/linux/mmap_lock.h:155 find_vma Call Trace: walk_page_range+0x76/0x150 migrate_vma_setup+0x18a/0x640 svm_migrate_vram_to_ram+0x245/0xa10 [amdgpu] svm_migrate_to_ram+0x36f/0x470 [amdgpu] do_swap_page+0xcfe/0xec0 __handle_mm_fault+0x96b/0x15e0 handle_mm_fault+0x13f/0x3e0 do_user_addr_fault+0x1e7/0x690
--- drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +1 -1
@@ -845,7 +845,7 @@ static vm_fault_t svm_migrate_to_ram(str goto out_unlock_prange; } - r =svm_migrate_vram_to_ram (prange, mm); + r =svm_migrate_vram_to_ram (prange, vmf->vma->vm_mm);if (r)pr_debug ("failed %d migrate svms 0x%p range 0x%p [0x%lx 0x%lx]\n" , r, prange->svms, prange, prange->start, prange->last);
Greg Kroah-Hartman
maintainerPATCH 131/131 net: tun: call napi_schedule_prep() to ensure we own a napi
In reply to Greg Kroah-HartmanFrom: Eric Dumazet <[email protected]>
commit 07d120aa33cc9d9115753d159f64d20c94458781 upstream.
A recent patch exposed another issue in napi_get_frags() caught by syzbot [1]
Before feeding packets to GRO, and calling napi_complete() we must first grab NAPI_STATE_SCHED.
[1]
WARNING: CPU: 0 PID: 3612 at net/core/dev.c:6076 napi_complete_done+0x45b/0x880 net/core/dev.c:6076 Modules linked in: CPU: 0 PID: 3612 Comm: syz-executor408 Not tainted 6.1.0-rc3-syzkaller-00175-g1118b2049d77 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:napi_complete_done+0x45b/0x880 net/core/dev.c:6076 Code: c1 ea 03 0f b6 14 02 4c 89 f0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 24 04 00 00 41 89 5d 1c e9 73 fc ff ff e8 b5 53 22 fa <0f> 0b e9 82 fe ff ff e8 a9 53 22 fa 48 8b 5c 24 08 31 ff 48 89 de RSP: 0018:ffffc90003c4f920 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000030 RCX: 0000000000000000 RDX: ffff8880251c0000 RSI: ffffffff875a58db RDI: 0000000000000007 RBP: 0000000000000001 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888072d02628 R13: ffff888072d02618 R14: ffff888072d02634 R15: 0000000000000000 FS: 0000555555f13300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c44d3892b8 CR3: 00000000172d2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> napi_complete include/linux/netdevice.h:510 [inline] tun_get_user+0x206d/0x3a60 drivers/net/tun.c:1980 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:2191 [inline] do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735 do_iter_write+0x182/0x700 fs/read_write.c:861 vfs_writev+0x1aa/0x630 fs/read_write.c:934 do_writev+0x133/0x2f0 fs/read_write.c:977 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f37021a3c19
--- drivers/net/tun.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
drivers/net/tun.c +13 -6
@@ -1949,18 +1949,25 @@ drop: skb_headlen(skb));if (unlikely (headlen >skb_headlen (skb))) { +WARN_ON_ONCE (1 ); + err = -ENOMEM ;atomic_long_inc (&tun->dev->rx_dropped); +napi_busy:napi_free_frags (&tfile->napi);rcu_read_unlock ();mutex_unlock (&tfile->napi_mutex); -WARN_ON (1 ); -return -ENOMEM ; +return err; } -local_bh_disable (); -napi_gro_frags (&tfile->napi); -napi_complete (&tfile->napi); -local_bh_enable (); +if (likely (napi_schedule_prep (&tfile->napi))) { +local_bh_disable (); +napi_gro_frags (&tfile->napi); +napi_complete (&tfile->napi); +local_bh_enable (); + }else { + err = -EBUSY ; + goto napi_busy; + }mutex_unlock (&tfile->napi_mutex); }else if (tfile->napi_enabled) {struct sk_buff_head *queue = &tfile->sk.sk_write_queue;
Greg Kroah-Hartman
maintainerPATCH 126/131 dmaengine: at_hdmac: Dont allow CPU to reorder channel enable
In reply to Greg Kroah-HartmanFrom: Tudor Ambarus <[email protected]>
commit 580ee84405c27d6ed419abe4d2b3de1968abdafd upstream.
at_hdmac uses __raw_writel for register writes. In the absence of a barrier, the CPU may reorder the register operations. Introduce a write memory barrier so that the CPU does not reorder the channel enable, thus the start of the transfer, without making sure that all the pre-required register fields are already written.
--- drivers/dma/at_hdmac.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/dma/at_hdmac.c +2 -0
@@ -256,6 +256,8 @@ static void atc_dostart(struct at_dma_ch ATC_SPIP_BOUNDARY(first->boundary));channel_writel (atchan,DPIP ,ATC_DPIP_HOLE (first->dst_hole) |ATC_DPIP_BOUNDARY (first->boundary)); +/* Don't allow CPU to reorder channel enable. */ +wmb ();dma_writel (atdma,CHER , atchan->mask);vdbg_dump_regs (atchan);
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.79-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.15:
11 builds: 11 pass, 0 fail
28 boots: 28 pass, 0 fail
114 tests: 114 pass, 0 failLinux version: 5.15.79-rc1-gb6ea7e152210
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04Jon
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
Build reference: v5.15.78-132-gb6ea7e152210 Compiler version: arm-linux-gnueabi-gcc (GCC) 11.3.0 Assembler version: GNU assembler (GNU Binutils) 2.39
Building arm:allmodconfig ... failed
--------------
Error log:drivers/net/ethernet/mediatek/mtk_star_emac.c: In function 'mtk_star_enable':drivers/net/ethernet/mediatek/mtk_star_emac.c:980:29: error: 'struct mtk_star_priv' has no member named 'rx_napi'; did you mean 'napi'?
980 | napi_disable(&priv->rx_napi);
| ^~~~~~~
| napi
drivers/net/ethernet/mediatek/mtk_star_emac.c:981:29: error: 'struct mtk_star_priv' has no member named 'tx_napi'; did you mean 'napi'?
981 | napi_disable(&priv->tx_napi);
| ^~~~~~~
| napiGuenter
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.79-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
Quoted 7 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
5.15.79-rc1 compiled and booted on my x86_64 test system. No errors or regressions.
All the best,
-srw
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.79-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
Signature · 1 line
Florian
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
Build results:
total: 154 pass: 152 fail: 2
Failed builds:
arm:allmodconfig
arm64:allmodconfig
Qemu test results:
total: 489 pass: 489 fail: 0
Build errors as already reported.
Building arm64:allmodconfig ... failed
--------------
Error log:drivers/net/ethernet/mediatek/mtk_star_emac.c: In function 'mtk_star_enable':drivers/net/ethernet/mediatek/mtk_star_emac.c:980:29: error: 'struct mtk_star_priv' has no member named 'rx_napi'; did you mean 'napi'?
980 | napi_disable(&priv->rx_napi);
| ^~~~~~~
| napi
drivers/net/ethernet/mediatek/mtk_star_emac.c:981:29: error: 'struct mtk_star_priv' has no member named 'tx_napi'; did you mean 'napi'?
981 | napi_disable(&priv->tx_napi);
| ^~~~~~~
| napiGuenter
Quoted 7 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
No regressions found on WSL x86_64 or WSL arm64
Built, booted, and compared dmesg against 5.15.78.
Thank you.
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.79-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
As others reported,
arm: allmodconfig failed [1] due to following warnings / errors.
drivers/net/ethernet/mediatek/mtk_star_emac.c: In function 'mtk_star_enable':drivers/net/ethernet/mediatek/mtk_star_emac.c:980:22: error: 'struct mtk_star_priv' has no member named 'rx_napi'; did you mean 'napi'?
980 | napi_disable(&priv->rx_napi);
| ^~~~~~~
| napi
drivers/net/ethernet/mediatek/mtk_star_emac.c:981:22: error: 'struct
mtk_star_priv' has no member named 'tx_napi'; did you mean 'napi'?
981 | napi_disable(&priv->tx_napi);
| ^~~~~~~
| napi---
net: ethernet: mtk-star-emac: disable napi when connect and start PHY failed in mtk_star_enable()
[ Upstream commit b0c09c7f08c2467b2089bdf4adb2fbbc2464f4a8 ]
[1] https://builds.tuxbuild.com/2HXmwUDUvmWI1Uc7zsdXNcsTqW1/
--
Linaro LKFT
https://lkft.linaro.org
Quoted 43 lines · Naresh Kamboju
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.79-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
As others reported,
arm: allmodconfig failed [1] due to following warnings / errors.
drivers/net/ethernet/mediatek/mtk_star_emac.c: In function 'mtk_star_enable':drivers/net/ethernet/mediatek/mtk_star_emac.c:980:22: error: 'structmtk_star_priv' has no member named 'rx_napi'; did you mean 'napi'?980 | napi_disable(&priv->rx_napi); | ^~~~~~~ | napi drivers/net/ethernet/mediatek/mtk_star_emac.c:981:22: error: 'struct mtk_star_priv' has no member named 'tx_napi'; did you mean 'napi'? 981 | napi_disable(&priv->tx_napi); | ^~~~~~~ | napi---
net: ethernet: mtk-star-emac: disable napi when connect and start PHY failed inmtk_star_enable()
[ Upstream commitb0c09c7f08c2467b2089bdf4adb2fbbc2464f4a8]
Quoted 5 lines
[1] https://builds.tuxbuild.com/2HXmwUDUvmWI1Uc7zsdXNcsTqW1/
--
Linaro LKFT
https://lkft.linaro.org
Yes ,For stable-5.10, commit 0a8bd81fd6aaace14979152e0540da8ff158a00a ("net: ethernet: mtk-star-emac: separate tx/rx handling with two NAPIs") is not merged. So, please use napi_disable(&priv->napi) instead of napi_disable(&priv->rx_napi) and napi_disable(&priv->tx_napi).
Quoted 5 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and powerpc (ps3_defconfig, GCC 12.2.0).
Signature · 1 line
An old man doll... just what I always wanted! - Clara
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.79-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Hi Greg,
Quoted 7 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
Build test (gcc version 12.2.1 20221016):
mips: 62 configs -> no failure
arm: 99 configs -> 1 failure
arm64: 3 configs -> 1 failurex86_64: 4 configs -> no failure alpha allmodconfig -> no failure csky allmodconfig -> no failure powerpc allmodconfig -> no failure riscv allmodconfig -> no failure s390 allmodconfig -> no failure xtensa allmodconfig -> no failure
Note:
As already mailed by others, both arm and arm64 allmodconfig fails to build:
drivers/net/ethernet/mediatek/mtk_star_emac.c: In function 'mtk_star_enable':drivers/net/ethernet/mediatek/mtk_star_emac.c:980:29: error: 'struct mtk_star_priv' has no member named 'rx_napi'; did you mean 'napi'?
980 | napi_disable(&priv->rx_napi);
| ^~~~~~~
| napi
drivers/net/ethernet/mediatek/mtk_star_emac.c:981:29: error: 'struct mtk_star_priv' has no member named 'tx_napi'; did you mean 'napi'?
981 | napi_disable(&priv->tx_napi);
| ^~~~~~~
| napiBoot test:x86_64: Booted on my test laptop. No regression.x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
[1]. https://openqa.qa.codethink.co.uk/tests/2158
[2]. https://openqa.qa.codethink.co.uk/tests/2163
Signature · 2 lines
Regards Sudip
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.79-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro's test farm.
A part from allmodconfig build failures on arm and arm64 other test reports are looking ok.
## Build
* kernel: 5.15.79-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: b6ea7e152210f358e39d05a567697a098aa16e7a
* git describe: v5.15.78-132-gb6ea7e152210
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.78-132-gb6ea7e152210
## Test Regressions (compared to v5.15.78)
## Metric Regressions (compared to v5.15.78)
## Test Fixes (compared to v5.15.78)
## Metric Fixes (compared to v5.15.78)
## Test result summary
total: 63728, pass: 54817, fail: 1467, skip: 7178, xfail: 266
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 289 total, 287 passed, 2 failed
* arm64: 80 total, 77 passed, 3 failed
* i386: 68 total, 64 passed, 4 failed
* mips: 54 total, 54 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 60 total, 60 passed, 0 failed
* riscv: 20 total, 20 passed, 0 failed
* s390: 24 total, 24 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 76 total, 72 passed, 4 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-breakpoints
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-kvm
* kselftest-lib
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-openat2
* kselftest-seccomp
* kselftest-timens
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
Greg Kroah-Hartman
maintainerQuoted 48 lines · shaozhengchao
Quoted 45 lines · Naresh Kamboju
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.79-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
As others reported,
arm: allmodconfig failed [1] due to following warnings / errors.
drivers/net/ethernet/mediatek/mtk_star_emac.c: In function 'mtk_star_enable':drivers/net/ethernet/mediatek/mtk_star_emac.c:980:22: error: 'structmtk_star_priv' has no member named 'rx_napi'; did you mean 'napi'?980 | napi_disable(&priv->rx_napi); | ^~~~~~~ | napi drivers/net/ethernet/mediatek/mtk_star_emac.c:981:22: error: 'struct mtk_star_priv' has no member named 'tx_napi'; did you mean 'napi'? 981 | napi_disable(&priv->tx_napi); | ^~~~~~~ | napi---
net: ethernet: mtk-star-emac: disable napi when connect and start PHY failed inmtk_star_enable()
[ Upstream commitb0c09c7f08c2467b2089bdf4adb2fbbc2464f4a8][1] https://builds.tuxbuild.com/2HXmwUDUvmWI1Uc7zsdXNcsTqW1/
Quoted 8 lines
Quoted 3 lines
--
Linaro LKFT
https://lkft.linaro.orgYes ,For stable-5.10, commit
0a8bd81fd6aaace14979152e0540da8ff158a00a("net: ethernet: mtk-star-emac: separate tx/rx handling with two NAPIs") is not merged. So, please usenapi_disable(&priv->napi)instead ofnapi_disable(&priv->rx_napi)andnapi_disable(&priv->tx_napi).
I think you mean 5.15 here, not 5.10, right?
Can you send a properly backported version of this commit for 5.10.y and 5.15.y so that I can queue it up? I'll go drop this offending one from the queue now and push out a -rc2 so that it doesn't stall the release.
thanks,
greg k-h
Greg Kroah-Hartman
maintainerQuoted 27 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
Build reference: v5.15.78-132-gb6ea7e152210 Compiler version: arm-linux-gnueabi-gcc (GCC) 11.3.0 Assembler version: GNU assembler (GNU Binutils) 2.39
Building arm:allmodconfig ... failed
--------------
Error log:drivers/net/ethernet/mediatek/mtk_star_emac.c: In function 'mtk_star_enable':drivers/net/ethernet/mediatek/mtk_star_emac.c:980:29: error: 'structmtk_star_priv' has no member named 'rx_napi'; did you mean 'napi'?980 | napi_disable(&priv->rx_napi); | ^~~~~~~ | napi drivers/net/ethernet/mediatek/mtk_star_emac.c:981:29: error: 'struct mtk_star_priv' has no member named 'tx_napi'; did you mean 'napi'? 981 | napi_disable(&priv->tx_napi); | ^~~~~~~ | napi
Quoted 1 line
Guenter
Thanks, should now be fixed in -rc2
Greg Kroah-Hartman
maintainerQuoted 27 lines · Naresh Kamboju
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.79-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
As others reported,
arm: allmodconfig failed [1] due to following warnings / errors.
drivers/net/ethernet/mediatek/mtk_star_emac.c: In function 'mtk_star_enable':drivers/net/ethernet/mediatek/mtk_star_emac.c:980:22: error: 'structmtk_star_priv' has no member named 'rx_napi'; did you mean 'napi'?
Quoted 9 lines
980 | napi_disable(&priv->rx_napi);
| ^~~~~~~
| napi
drivers/net/ethernet/mediatek/mtk_star_emac.c:981:22: error: 'struct
mtk_star_priv' has no member named 'tx_napi'; did you mean 'napi'?
981 | napi_disable(&priv->tx_napi);
| ^~~~~~~
| napiShould now be fixed in -rc2
Greg Kroah-Hartman
maintainerQuoted 28 lines · Sudip Mukherjee
Hi Greg,
Quoted 7 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.79 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 16 Nov 2022 12:44:21 +0000. Anything received after that time might be too late.
Build test (gcc version 12.2.1 20221016):
mips: 62 configs -> no failure
arm: 99 configs -> 1 failure
arm64: 3 configs -> 1 failurex86_64: 4 configs -> no failure alpha allmodconfig -> no failure csky allmodconfig -> no failure powerpc allmodconfig -> no failure riscv allmodconfig -> no failure s390 allmodconfig -> no failure xtensa allmodconfig -> no failureNote:
As already mailed by others, both arm and arm64 allmodconfig fails to build:
drivers/net/ethernet/mediatek/mtk_star_emac.c: In function 'mtk_star_enable':drivers/net/ethernet/mediatek/mtk_star_emac.c:980:29: error: 'structmtk_star_priv' has no member named 'rx_napi'; did you mean 'napi'?
Quoted 9 lines
980 | napi_disable(&priv->rx_napi);
| ^~~~~~~
| napi
drivers/net/ethernet/mediatek/mtk_star_emac.c:981:29: error: 'struct mtk_star_priv' has no member named 'tx_napi'; did you mean 'napi'?
981 | napi_disable(&priv->tx_napi);
| ^~~~~~~
| napiShould now be fixed in -rc2