Skip to contentSkip to conversation

drivers: various typos found by Lintian

PATCH Applied [email protected] 2 participants 2 messages Nov 14, 2022 – Nov 15, 2022

Subsystems (3)
Network drivers Crypto API Bonding driver
lore
Share & tools
lore

[email protected]

author
#0 lore raw

PATCH 1/1 drivers: various typos found by Lintian

From: Luca Boccassi <[email protected]>

Signed-off-by Luca Boccassi <[email protected]>
---
 drivers/crypto/dpaa_sec/dpaa_sec.c     | 4 ++--
 drivers/net/bonding/rte_eth_bond_pmd.c | 2 +-
 drivers/net/hns3/hns3_ethdev.c         | 2 +-
 drivers/net/qede/base/ecore_int.c      | 4 ++--
 4 files changed, 6 insertions(+), 6 deletions(-)
drivers/crypto/dpaa_sec/dpaa_sec.c +2 -2
index b1e7027823..db52683847 100644
@@ -754,14 +754,14 @@ dpaa_sec_dump(struct dpaa_sec_op_ctx *ctx, struct dpaa_sec_qp *qp)
 	printf("ctx info:\n");
 	printf("job->sg[0] output info:\n");
 	memcpy(&sg[0], &job->sg[0], sizeof(sg[0]));
-	printf("\taddr = %"PRIx64",\n\tlen = %d,\n\tfinal = %d,\n\textention = %d"
+	printf("\taddr = %"PRIx64",\n\tlen = %d,\n\tfinal = %d,\n\textension = %d"
 		"\n\tbpid = %d\n\toffset = %d\n",
 		(uint64_t)sg[0].addr, sg[0].length, sg[0].final,
 		sg[0].extension, sg[0].bpid, sg[0].offset);
 	printf("\njob->sg[1] input info:\n");
 	memcpy(&sg[1], &job->sg[1], sizeof(sg[1]));
 	hw_sg_to_cpu(&sg[1]);
-	printf("\taddr = %"PRIx64",\n\tlen = %d,\n\tfinal = %d,\n\textention = %d"
+	printf("\taddr = %"PRIx64",\n\tlen = %d,\n\tfinal = %d,\n\textension = %d"
 		"\n\tbpid = %d\n\toffset = %d\n",
 		(uint64_t)sg[1].addr, sg[1].length, sg[1].final,
 		sg[1].extension, sg[1].bpid, sg[1].offset);
drivers/net/bonding/rte_eth_bond_pmd.c +1 -1
index 2efaad1e8e..b9bcebc6cb 100644
@@ -198,7 +198,7 @@ bond_ethdev_8023ad_flow_verify(struct rte_eth_dev *bond_dev,
 	if (slave_info.max_rx_queues < bond_dev->data->nb_rx_queues ||
 			slave_info.max_tx_queues < bond_dev->data->nb_tx_queues) {
 		RTE_BOND_LOG(ERR,
-			"%s: Slave %d capabilities doesn't allow to allocate additional queues",
+			"%s: Slave %d capabilities doesn't allow allocating additional queues",
 			__func__, slave_port);
 		return -1;
 	}
drivers/net/hns3/hns3_ethdev.c +1 -1
index b4365b78be..d326f70129 100644
@@ -1661,7 +1661,7 @@ hns3_set_default_mac_addr(struct rte_eth_dev *dev,
 		hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
 				       mac_addr);
 		hns3_warn(hw,
-			  "Failed to roll back to del setted mac addr(%s): %d",
+			  "Failed to roll back to del set mac addr(%s): %d",
 			  mac_str, ret_val);
 	}
drivers/net/qede/base/ecore_int.c +2 -2
index 2c4aac9418..d9faf6bfcd 100644
@@ -366,7 +366,7 @@ enum _ecore_status_t ecore_pglueb_rbc_attn_handler(struct ecore_hwfn *p_hwfn,
 
 	tmp = ecore_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_WR_DETAILS_ICPL);
 	if (tmp & ECORE_PGLUE_ATTENTION_ICPL_VALID)
-		DP_NOTICE(p_hwfn, false, "ICPL erorr - %08x\n", tmp);
+		DP_NOTICE(p_hwfn, false, "ICPL error - %08x\n", tmp);
 
 	tmp = ecore_rd(p_hwfn, p_ptt, PGLUE_B_REG_MASTER_ZLR_ERR_DETAILS);
 	if (tmp & ECORE_PGLUE_ATTENTION_ZLR_VALID) {

@@ -378,7 +378,7 @@ enum _ecore_status_t ecore_pglueb_rbc_attn_handler(struct ecore_hwfn *p_hwfn,
 				   PGLUE_B_REG_MASTER_ZLR_ERR_ADD_63_32);
 
 		DP_NOTICE(p_hwfn, false,
-			  "ICPL erorr - %08x [Address %08x:%08x]\n",
+			  "ICPL error - %08x [Address %08x:%08x]\n",
 			  tmp, addr_hi, addr_lo);
 	}
Signature · 1 line
2.34.1