Nokia RX-51: Fixes for U-Boot v2023.01-rc1
cover Nokia RX-51: Fixes for U-Boot v2023.01-rc1
This patch series fixes U-Boot v2023.01-rc1 on Nokia N900 and extend documentation for debugging purposes. The main issue is broken POSITION_INDEPENDENT=y for (probably all) 32-bit ARM boards.
Pali Rohár (3):
arm32: Fix relocation of env_addr if POSITION_INDEPENDENT=y Nokia RX-51: Document debugging options and compile command Nokia RX-51: Do not overwrite standard $loadaddr variable
arch/arm/lib/crt0.S | 5 +++++ doc/board/nokia/rx51.rst | 32 ++++++++++++++++++++++++++++++++ include/configs/nokia_rx51.h | 9 +++++---- 3 files changed, 42 insertions(+), 4 deletions(-)
Signature · 1 line
2.20.1
PATCH 3/3 Nokia RX-51: Do not overwrite standard $loadaddr variable
Instead of overwriting $loadaddr variable, use custom temporary $fileloadaddr variable. So scripts can access default/original address stored in $loadaddr at build time.
--- include/configs/nokia_rx51.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
include/configs/nokia_rx51.h +5 -4
@@ -78,15 +78,16 @@"kernaddr=0x82008000\0" \"initrdaddr=0x84008000\0" \"scriptaddr=0x86008000\0" \ + "fileloadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ -"${loadaddr} ${mmcfile}\0" \ -"kernload=setenv loadaddr ${kernaddr};" \ +"${fileloadaddr} ${mmcfile}\0" \ +"kernload=setenv fileloadaddr ${kernaddr};" \"setenv mmcfile ${mmckernfile};" \"run fileload\0" \ -"initrdload=setenv loadaddr ${initrdaddr};" \ +"initrdload=setenv fileloadaddr ${initrdaddr};" \"setenv mmcfile ${mmcinitrdfile};" \"run fileload\0" \ -"scriptload=setenv loadaddr ${scriptaddr};" \ +"scriptload=setenv fileloadaddr ${scriptaddr};" \"setenv mmcfile ${mmcscriptfile};" \"run fileload\0" \"scriptboot=echo Running ${mmcscriptfile} from mmc " \
Signature · 1 line
2.20.1
PATCH 2/3 Nokia RX-51: Document debugging options and compile command
In reply to Pali RohárAdd example command how to compile U-Boot and add new documentation section describing how to enable early debug UART and verbose log output for N900.
--- doc/board/nokia/rx51.rst | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
doc/board/nokia/rx51.rst +32 -0
@@ -9,6 +9,10 @@ on a real N900. It does very little hardware configuration because NOLO has already configured the board. It is only needed to enable the internal eMMC memory via the twl4030 regulator which is not enabled by NOLO. +.. code-block:: bash + + make CROSS_COMPILE=arm-linux-gnueabi- nokia_rx51_defconfig u-boot.bin + NOLO is expecting a kernel image and will treat any image it finds in OneNAND as such. This u-boot is intended to be flashed to the N900 like a kernel. In order to transparently boot the original kernel, it will be
@@ -160,6 +164,34 @@ UBIFS support add following lines into file ``configs/nokia_rx51_defconfig``:: CONFIG_CMD_UBIFS=y CONFIG_MTD_UBI_BEB_LIMIT=10 +Early output +------------ + +Early U-Boot output can be enabled on serial console by adding following lines +into file ``configs/nokia_rx51_defconfig``:: + + CONFIG_DEBUG_UART=y + CONFIG_DEBUG_UART_OMAP=y + CONFIG_DEBUG_UART_SHIFT=2 + CONFIG_DEBUG_UART_BASE=0x49020000 + CONFIG_DEBUG_UART_CLOCK=48000000 + +Note that early output is not available on USB tty console. + +Verbose debug output +-------------------- + +Verbose debug output with maximal log level can be enabled by adding following +lines into file ``configs/nokia_rx51_defconfig``:: + + CONFIG_DM_DEBUG=y + CONFIG_LOG=y + CONFIG_LOGLEVEL=9 + CONFIG_LOG_MAX_LEVEL=9 + CONFIG_LOG_DEFAULT_LEVEL=9 + +And compiling U-Boot by additional make parameter ``KCPPFLAGS=-DLOG_DEBUG``. + Run in QEMU -----------
Signature · 1 line
2.20.1
PATCH 1/3 arm32: Fix relocation of env_addr if POSITION_INDEPENDENT=y
In reply to Pali RohárApply commit 534f0fbd6520 ("arm64: Fix relocation of env_addr if POSITION_INDEPENDENT=y") also for 32-bit ARM.
This change fixes crashing of U-Boot on ARMv7 (Omap3 / Cortex-A8) Nokia N900 phone (real HW). Note that qemu emulator of this board with same u-boot.bin binary has not triggered this crash.
Crash happened after U-Boot printed following debug lines to serial console:
initcall: 0001ea8c (relocated to 8fe0aa8c)
Loading Environment from <NULL>... Using default environment Destroy Hash Table: 8fe25a98 table = 00000000 Create Hash Table: N=387
--- arch/arm/lib/crt0.S | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/lib/crt0.S +5 -0
@@ -147,6 +147,11 @@ ENTRY(_main) ldr r1, =CONFIG_TEXT_BASE sub r1, r0 add lr, r1 +#if defined(CONFIG_SYS_RELOC_GD_ENV_ADDR) + ldr r0, [r9, #GD_ENV_ADDR] /* r0 = gd->env_addr */ + add r0, r0, r1 + str r0, [r9, #GD_ENV_ADDR] +#endif #endif ldr r0, [r9, #GD_RELOC_OFF] /* r0 = gd->reloc_off */ add lr, lr, r0
Signature · 1 line
2.20.1
Re: [PATCH 1/3] arm32: Fix relocation of env_addr if POSITION_INDEPENDENT=y
Quoted 8 lines · Pali Rohár
Apply commit
534f0fbd6520("arm64: Fix relocation ofenv_addrif POSITION_INDEPENDENT=y") also for 32-bit ARM.This change fixes crashing of U-Boot on ARMv7 (Omap3 / Cortex-A8) Nokia N900 phone (real HW). Note that qemu emulator of this board with same u-boot.bin binary has not triggered this crash.
Quoted 8 lines
Crash happened after U-Boot printed following debug lines to serial console:
initcall:
0001ea8c(relocated to8fe0aa8c)
Loading Environment from <NULL>... Using default environment Destroy Hash Table:8fe25a98table = 00000000 Create Hash Table: N=387Signed-off-by Pali Rohár <[email protected]>
It would be nice to add:
Re: [PATCH 1/3] arm32: Fix relocation of env_addr if POSITION_INDEPENDENT=y
In reply to Pali RohárQuoted 7 lines · Pali Rohár
Apply commit
534f0fbd6520("arm64: Fix relocation ofenv_addrif POSITION_INDEPENDENT=y") also for 32-bit ARM.This change fixes crashing of U-Boot on ARMv7 (Omap3 / Cortex-A8) Nokia N900 phone (real HW). Note that qemu emulator of this board with same u-boot.bin binary has not triggered this crash.
Quoted 8 lines
Crash happened after U-Boot printed following debug lines to serial console:
initcall:
0001ea8c(relocated to8fe0aa8c)
Loading Environment from <NULL>... Using default environment Destroy Hash Table:8fe25a98table = 00000000 Create Hash Table: N=387Signed-off-by Pali Rohár <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom
Re: [PATCH 2/3] Nokia RX-51: Document debugging options and compile command
In reply to Pali RohárQuoted 4 lines · Pali Rohár
Add example command how to compile U-Boot and add new documentation section describing how to enable early debug UART and verbose log output for N900.
Signed-off-by Pali Rohár <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom
Re: [PATCH 3/3] Nokia RX-51: Do not overwrite standard $loadaddr variable
In reply to Pali RohárQuoted 5 lines · Pali Rohár
Instead of overwriting $loadaddr variable, use custom temporary $fileloadaddr variable. So scripts can access default/original address stored in $loadaddr at build time.
Signed-off-by Pali Rohár <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom