Skip to contentSkip to conversation

drm/i915/dp: Change aux_ctl reg read to polling read

PATCH Superseded Arun R Murthy 2 participants 2 messages Dec 9, 2022 1 message not in the archive

Subsystems (3)

v3 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH v3 1/1 drm/i915/dp: Change aux_ctl reg read to polling read

The busy timeout logic checks for the AUX BUSY, then waits for the timeout period and then after timeout reads the register for BUSY or Success.
Instead replace interrupt with polling so as to read the AUX CTL register often before the timeout period. Looks like there might be some issue with interrupt-on-read. Hence changing the logic to polling read.

v2: replace interrupt with polling read
v3: use usleep_rang instead of msleep, updated commit msg

---
 drivers/gpu/drm/i915/display/intel_dp_aux.c | 24 ++++++++++++---------
 1 file changed, 14 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/display/intel_dp_aux.c +14 -10
index 664bebdecea7..878452e6e37f 100644
@@ -40,21 +40,25 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp)
 	i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg(intel_dp);
 	const unsigned int timeout_ms = 10;
 	u32 status;
-	bool done;
+	int try;
 
-#define C (((status = intel_uncore_read_notrace(&i915->uncore, ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
-	done = wait_event_timeout(i915->display.gmbus.wait_queue, C,
-				  msecs_to_jiffies_timeout(timeout_ms));
+	for (try = 0; try < 10; try++) {
+		status = intel_uncore_read_notrace(&i915->uncore, ch_ctl);
+		if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+			break;
+		usleep_range(400, 500);
+	}
 
+	if (try == 3) {
+		status = intel_uncore_read_notrace(&i915->uncore, ch_ctl);
+		if ((status & DP_AUX_CH_CTL_SEND_BUSY) != 0)
+			drm_err(&i915->drm,
+				"%s: did not complete or timeout within %ums (status 0x%08x)\n",
+				intel_dp->aux.name, timeout_ms, status);
+	}
 	/* just trace the final value */
 	trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
 
-	if (!done)
-		drm_err(&i915->drm,
-			"%s: did not complete or timeout within %ums (status 0x%08x)\n",
-			intel_dp->aux.name, timeout_ms, status);
-#undef C
-
 	return status;
 }
 
Signature · 1 line
2.25.1
#2 lore raw

[Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915/dp: Change aux_ctl reg read to polling read

In reply to a message not in the archive
== Series Details ==

== Series Details ==

Series: drm/i915/dp: Change aux_ctl reg read to polling read
URL : https://patchwork.freedesktop.org/series/111794/
State : failure

== Summary ==

Error: patch https://patchwork.freedesktop.org/api/1.0/series/111794/revisions/1/mbox/ not applied
Applying: drm/i915/dp: Change aux_ctl reg read to polling read
Using index info to reconstruct a base tree...
M drivers/gpu/drm/i915/display/intel_dp_aux.c
Falling back to patching base and 3-way merge...
Auto-merging drivers/gpu/drm/i915/display/intel_dp_aux.c
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/display/intel_dp_aux.c
error: Failed to merge in the changes.
hint: Use 'git am --show-current-patch=diff' to see the failed patch
Patch failed at 0001 drm/i915/dp: Change aux_ctl reg read to polling read
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".