dts: synquacer: Drop unused and undocumented SPI properties
PATCH 2/2 dts: synquacer: Drop unused and undocumented GPIO 'base' property
In reply to Rob HerringThe 'base' GPIO controller property is unused in u-boot and Linux. It is also not documented in the binding. So drop it.
--- arch/arm/dts/synquacer-sc2a11.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm/dts/synquacer-sc2a11.dtsi +0 -1
@@ -497,7 +497,6 @@ gpio-controller; #gpio-cells = <2>; clocks = <&clk_apb>; - base = <0>; }; exiu: interrupt-controller@510c0000 {
Signature · 1 line
2.35.1
PATCH 1/2 dts: synquacer: Drop unused and undocumented SPI properties
'active_clk_edges' and 'chipselect_num' SPI controller properties are unused in u-boot and Linux. They are also not documented in the binding. So drop them.
--- arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 2 -- 1 file changed, 2 deletions(-)
arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi +0 -2
@@ -20,8 +20,6 @@ #address-cells = <1>; #size-cells = <0>; status = "okay"; - active_clk_edges; - chipselect_num = <1>; flash@0 { #address-cells = <1>;
Signature · 1 line
2.35.1
+ Jassi
Quoted 15 lines · Rob Herring
'
active_clk_edges' and 'chipselect_num' SPI controller properties are unused in u-boot and Linux. They are also not documented in the binding. So drop them.Signed-off-by Rob Herring <[email protected]>--- arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 2 -- 1 file changed, 2 deletions(-)arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi +0
-0
arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi line 24
Quoted 5 lines
arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi +0
-2@@ -20,8 +20,6 @@ #address-cells = <1>; #size-cells = <0>; status = "okay"; - active_clk_edges; - chipselect_num = <1>;
Thank you for cleaning up the unused properties.
Regards,
Masahisa Kojima
Quoted 6 lines
arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi +0
-1flash@0 { #address-cells = <1>; --2.35.1
Re: [PATCH 2/2] dts: synquacer: Drop unused and undocumented GPIO 'base' property
In reply to Rob Herring+ Jassi
Quoted 14 lines · Rob Herring
The 'base' GPIO controller property is unused in u-boot and Linux. It is also not documented in the binding. So drop it.
Signed-off-by Rob Herring <[email protected]>--- arch/arm/dts/synquacer-sc2a11.dtsi | 1 - 1 file changed, 1 deletion(-)arch/arm/dts/synquacer-sc2a11.dtsi +0
-0
arch/arm/dts/synquacer-sc2a11.dtsi line 500
Quoted 4 lines
arch/arm/dts/synquacer-sc2a11.dtsi +0
-1@@ -497,7 +497,6 @@ gpio-controller; #gpio-cells = <2>; clocks = <&clk_apb>; - base = <0>;
Regards,
Masahisa Kojima
Quoted 6 lines
arch/arm/dts/synquacer-sc2a11.dtsi +0
-1}; exiu: interrupt-controller@510c0000 { --2.35.1
Quoted 25 lines · Rob Herring
'
active_clk_edges' and 'chipselect_num' SPI controller properties are unused in u-boot and Linux. They are also not documented in the binding. So drop them.Signed-off-by Rob Herring <[email protected]>--- arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 2 -- 1 file changed, 2 deletions(-)arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi +0
-2@@ -20,8 +20,6 @@ #address-cells = <1>; #size-cells = <0>; status = "okay"; - active_clk_edges; - chipselect_num = <1>; flash@0 { #address-cells = <1>;Signature · 1 line
2.35.1
Re: [PATCH 2/2] dts: synquacer: Drop unused and undocumented GPIO 'base' property
In reply to Rob HerringQuoted 23 lines · Rob Herring
The 'base' GPIO controller property is unused in u-boot and Linux. It is also not documented in the binding. So drop it.
Signed-off-by Rob Herring <[email protected]>--- arch/arm/dts/synquacer-sc2a11.dtsi | 1 - 1 file changed, 1 deletion(-)arch/arm/dts/synquacer-sc2a11.dtsi +0
-1@@ -497,7 +497,6 @@ gpio-controller; #gpio-cells = <2>; clocks = <&clk_apb>; - base = <0>; }; exiu: interrupt-controller@510c0000 {Signature · 1 line
2.35.1
Jassi Brar
Acked-byQuoted 14 lines · Masahisa Kojima
+ Jassi
Quoted 10 lines · Rob Herring
'
active_clk_edges' and 'chipselect_num' SPI controller properties are unused in u-boot and Linux. They are also not documented in the binding. So drop them.Signed-off-by Rob Herring <[email protected]>--- arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 2 -- 1 file changed, 2 deletions(-)
Quoted 13 lines
arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi line 24
Quoted 10 lines
arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi +0
-2@@ -20,8 +20,6 @@ #address-cells = <1>; #size-cells = <0>; status = "okay"; - active_clk_edges; - chipselect_num = <1>;Reviewed-by Masahisa Kojima <[email protected]>
Jassi Brar
Acked-byRe: [PATCH 2/2] dts: synquacer: Drop unused and undocumented GPIO 'base' property
In reply to Masahisa KojimaQuoted 13 lines · Masahisa Kojima
+ Jassi
Quoted 9 lines · Rob Herring
The 'base' GPIO controller property is unused in u-boot and Linux. It is also not documented in the binding. So drop it.
Signed-off-by Rob Herring <[email protected]>--- arch/arm/dts/synquacer-sc2a11.dtsi | 1 - 1 file changed, 1 deletion(-)
Quoted 12 lines
arch/arm/dts/synquacer-sc2a11.dtsi line 500
Quoted 9 lines
arch/arm/dts/synquacer-sc2a11.dtsi +0
-1@@ -497,7 +497,6 @@ gpio-controller; #gpio-cells = <2>; clocks = <&clk_apb>; - base = <0>;Reviewed-by Masahisa Kojima <[email protected]>
Quoted 8 lines · Rob Herring
'
active_clk_edges' and 'chipselect_num' SPI controller properties are unused in u-boot and Linux. They are also not documented in the binding. So drop them.Signed-off-by Rob Herring <[email protected]>Reviewed-by Masahisa Kojima <[email protected]>Acked-by Ilias Apalodimas <[email protected]>Acked-by Jassi Brar <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom
Re: [PATCH 2/2] dts: synquacer: Drop unused and undocumented GPIO 'base' property
In reply to Rob HerringQuoted 7 lines · Rob Herring
The 'base' GPIO controller property is unused in u-boot and Linux. It is also not documented in the binding. So drop it.
Signed-off-by Rob Herring <[email protected]>Reviewed-by Masahisa Kojima <[email protected]>Acked-by Ilias Apalodimas <[email protected]>Acked-by Jassi Brar <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom