dt-bindings: i2c: Convert Synquacer I2C to DT schema
Rob Herring
maintainerPATCH 1/1 dt-bindings: i2c: Convert Synquacer I2C to DT schema
Convert the Socionext Synquacer I2C binding to DT schema format.
Signed-off-by Rob Herring <[email protected]>
--- .../devicetree/bindings/i2c/i2c-synquacer.txt | 29 ---------- .../bindings/i2c/socionext,synquacer-i2c.yaml | 58 +++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 59 insertions(+), 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt create mode 100644 Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml
Documentation/devicetree/bindings/i2c/i2c-synquacer.txt deleted +0 -29
@@ -1,29 +0,0 @@ -Socionext SynQuacer I2C - -Required properties: -- compatible : Must be "socionext,synquacer-i2c" -- reg : Offset and length of the register set for the device -- interrupts : A single interrupt specifier -- #address-cells : Must be <1>; -- #size-cells : Must be <0>; -- clock-names : Must contain "pclk". -- clocks : Must contain an entry for each name in clock-names. - (See the common clock bindings.) - -Optional properties: -- clock-frequency : Desired I2C bus clock frequency in Hz. As only Normal and - Fast modes are supported, possible values are 100000 and - 400000. - -Example : - - i2c@51210000 { - compatible = "socionext,synquacer-i2c"; - reg = <0x51210000 0x1000>; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "pclk"; - clocks = <&clk_i2c>; - clock-frequency = <400000>; - };
Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml new file +58 -0
58 lines not on this page · raw message
MAINTAINERS +1 -1
@@ -19044,7 +19044,7 @@ SOCIONEXT SYNQUACER I2C DRIVER M: Ard Biesheuvel <[email protected]> L: [email protected] S: Maintained -F: Documentation/devicetree/bindings/i2c/i2c-synquacer.txt +F: Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml F: drivers/i2c/busses/i2c-synquacer.c SOCIONEXT UNIPHIER SOUND DRIVER
Signature · 1 line
2.35.1
Quoted 6 lines · Rob Herring
Convert the Socionext Synquacer I2C binding to DT schema format.
Signed-off-by Rob Herring <[email protected]>--- .../devicetree/bindings/i2c/i2c-synquacer.txt | 29 ---------- .../bindings/i2c/socionext,synquacer-i2c.yaml | 58 +++++++++++++++++++
Reviewed-by Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
Quoted 11 lines · Rob Herring
Convert the Socionext Synquacer I2C binding to DT schema format.
Signed-off-by Rob Herring <[email protected]>--- .../devicetree/bindings/i2c/i2c-synquacer.txt | 29 ---------- .../bindings/i2c/socionext,synquacer-i2c.yaml | 58 +++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 59 insertions(+), 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt create mode 100644 Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml
Applied, thanks!