FXLS8967AF and FXLS8974CF support
Subsystems (3)
cover FXLS8967AF and FXLS8974CF support
The patch set add two more NXP accelerometer entries for FXLS8967AF and FXLS8974CF in driver and update related compatible string for dt bindings.
Haibo Chen (1):
iio: accel: add fxls8974cf support
Han Xu (3):
iio: accel: add the new entry in driver for FXLS8967AF
dt-bindings: iio: accel: fxls8962af: add new compatible string
dt-bindings: iio: accel: fxls8974cf: add new compatible string
.../bindings/iio/accel/nxp,fxls8962af.yaml | 4 ++++ drivers/iio/accel/fxls8962af-core.c | 14 ++++++++++++++ drivers/iio/accel/fxls8962af-i2c.c | 4 ++++ drivers/iio/accel/fxls8962af.h | 2 ++ 4 files changed, 24 insertions(+)
Signature · 1 line
2.25.1
PATCH 1/4 iio: accel: add fxls8974cf support
From: Haibo Chen <[email protected]>
fxls8974cf is similar with fxls8962af, the only difference is the device id change to 0x86.
--- drivers/iio/accel/fxls8962af-core.c | 7 +++++++ drivers/iio/accel/fxls8962af-i2c.c | 2 ++ drivers/iio/accel/fxls8962af.h | 1 + 3 files changed, 10 insertions(+)
drivers/iio/accel/fxls8962af-core.c +7 -0
@@ -126,6 +126,7 @@#define FXLS8962AF_DEVICE_ID 0x62#define FXLS8964AF_DEVICE_ID 0x84 +#define FXLS8974CF_DEVICE_ID 0x86/* Raw temp channel offset */ #define FXLS8962AF_TEMP_CENTER_VAL 25
@@ -764,6 +765,12 @@ static const struct fxls8962af_chip_info fxls_chip_info_table[] = { .channels = fxls8962af_channels, .num_channels = ARRAY_SIZE(fxls8962af_channels), }, + [fxls8974cf] = { + .chip_id = FXLS8974CF_DEVICE_ID, + .name = "fxls8974cf", + .channels = fxls8962af_channels, + .num_channels = ARRAY_SIZE(fxls8962af_channels), + }, }; static const struct iio_info fxls8962af_info = {
drivers/iio/accel/fxls8962af-i2c.c +2 -0
@@ -30,6 +30,7 @@ static int fxls8962af_probe(struct i2c_client *client)static const struct i2c_device_id fxls8962af_id[] = { {"fxls8962af" , fxls8962af }, {"fxls8964af" , fxls8964af }, + {"fxls8974cf" , fxls8974cf }, {} };MODULE_DEVICE_TABLE (i2c, fxls8962af_id);
@@ -37,6 +38,7 @@ MODULE_DEVICE_TABLE(i2c, fxls8962af_id);static const struct of_device_id fxls8962af_of_match[] = { { .compatible ="nxp,fxls8962af" }, { .compatible ="nxp,fxls8964af" }, + { .compatible ="nxp,fxls8974cf" }, {} };MODULE_DEVICE_TABLE (of, fxls8962af_of_match);
drivers/iio/accel/fxls8962af.h +1 -0
@@ -11,6 +11,7 @@ struct device;enum { fxls8962af, fxls8964af, + fxls8974cf, };int fxls8962af_core_probe (struct device *dev,struct regmap *regmap,int irq);
Signature · 1 line
2.25.1
PATCH v2 2/4 iio: accel: add the new entry in driver for FXLS8967AF
In reply to Han XuAdd this new device entry in the driver id table.
---
changes in v2
- change chip info orders
--- drivers/iio/accel/fxls8962af-core.c | 7 +++++++ drivers/iio/accel/fxls8962af-i2c.c | 2 ++ drivers/iio/accel/fxls8962af.h | 1 + 3 files changed, 10 insertions(+)
drivers/iio/accel/fxls8962af-core.c +7 -0
@@ -127,6 +127,7 @@#define FXLS8962AF_DEVICE_ID 0x62#define FXLS8964AF_DEVICE_ID 0x84#define FXLS8974CF_DEVICE_ID 0x86 +#define FXLS8967AF_DEVICE_ID 0x87/* Raw temp channel offset */ #define FXLS8962AF_TEMP_CENTER_VAL 25
@@ -765,6 +766,12 @@ static const struct fxls8962af_chip_info fxls_chip_info_table[] = { .channels = fxls8962af_channels, .num_channels = ARRAY_SIZE(fxls8962af_channels), }, + [fxls8967af] = { + .chip_id = FXLS8967AF_DEVICE_ID, + .name = "fxls8967af", + .channels = fxls8962af_channels, + .num_channels = ARRAY_SIZE(fxls8962af_channels), + }, [fxls8974cf] = { .chip_id = FXLS8974CF_DEVICE_ID, .name = "fxls8974cf",
drivers/iio/accel/fxls8962af-i2c.c +2 -0
@@ -30,6 +30,7 @@ static int fxls8962af_probe(struct i2c_client *client)static const struct i2c_device_id fxls8962af_id[] = { {"fxls8962af" , fxls8962af }, {"fxls8964af" , fxls8964af }, + {"fxls8967af" , fxls8967af }, {"fxls8974cf" , fxls8974cf }, {} };
@@ -38,6 +39,7 @@ MODULE_DEVICE_TABLE(i2c, fxls8962af_id);static const struct of_device_id fxls8962af_of_match[] = { { .compatible ="nxp,fxls8962af" }, { .compatible ="nxp,fxls8964af" }, + { .compatible ="nxp,fxls8967af" }, { .compatible ="nxp,fxls8974cf" }, {} };
drivers/iio/accel/fxls8962af.h +1 -0
@@ -11,6 +11,7 @@ struct device;enum { fxls8962af, fxls8964af, + fxls8967af, fxls8974cf, };
Signature · 1 line
2.25.1
PATCH 3/4 dt-bindings: iio: accel: fxls8962af: add new compatible string
In reply to Han Xuadd new compatible string for the NXP FXLS8967AF accelerometer sensor.
--- Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml +2 -0
@@ -14,12 +14,14 @@ description: | SPI and I2C interface. https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf + https://www.nxp.com/docs/en/data-sheet/FXLS8967AF.pdf properties: compatible: enum: - nxp,fxls8962af - nxp,fxls8964af + - nxp,fxls8967af reg: maxItems: 1
Signature · 1 line
2.25.1
Re: [PATCH 3/4] dt-bindings: iio: accel: fxls8962af: add new compatible string
Quoted 1 line · Han Xu
add new compatible string for the NXP FXLS8967AF accelerometer sensor.
Start with capital letter.
Quoted 12 lines
Signed-off-by Han Xu <[email protected]>--- Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml | 2 ++ 1 file changed, 2 insertions(+)Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml +0
-0@@ -14,12 +14,14 @@ description: | SPI and I2C interface.
Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml description: | · line 24
Quoted 10 lines
Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml +2
-0https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf + https://www.nxp.com/docs/en/data-sheet/FXLS8967AF.pdf properties: compatible: enum: - nxp,fxls8962af - nxp,fxls8964af + - nxp,fxls8967af
They are all compatible with each other, right? Looks like, so these should be expressed in the bindings.
Best regards,
Krzysztof
PATCH 4/4 dt-bindings: iio: accel: fxls8974cf: add new compatible string
In reply to Han Xuadd new compatible string for the NXP FXLS8974CF accelerometer sensor.
--- Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml +2 -0
@@ -15,6 +15,7 @@ description: | https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf https://www.nxp.com/docs/en/data-sheet/FXLS8967AF.pdf + https://www.nxp.com/docs/en/data-sheet/FXLS8974CF.pdf properties: compatible:
@@ -22,6 +23,7 @@ properties: - nxp,fxls8962af - nxp,fxls8964af - nxp,fxls8967af + - nxp,fxls8974cf reg: maxItems: 1
Signature · 1 line
2.25.1
Quoted 6 lines · Han Xu
The patch set add two more NXP accelerometer entries for FXLS8967AF and FXLS8974CF in driver and update related compatible string for dt bindings.
Haibo Chen (1):
iio: accel: add fxls8974cf support
This contains some v2 some v1 patches. Please do not mix it. The entire series has one version. Your next will be v3 - for entire series.
Best regards,
Krzysztof
Quoted 3 lines · Han Xu
The patch set add two more NXP accelerometer entries for FXLS8967AF and FXLS8974CF in driver and update related compatible string for dt bindings.
Please resend to the lists that get_maintainers.pl tells you to.
Rob