Skip to contentSkip to conversation

fs: jfs: fix shift-out-of-bounds in dbAllocAG

PATCH In review Sasha Levin 2 participants 18 messages Dec 17, 2022 – Dec 18, 2022

Subsystems (7)
Stable branch VFS ACPI PCI +3 more subsystems
lore
Share & tools
lore
author maintainer
#8 lore raw

PATCH 9/16 nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()

In reply to Sasha Levin

From: Ryusuke Konishi <[email protected]>

[ Upstream commit 610a2a3d7d8be3537458a378ec69396a76c385b6 ]

Patch series "nilfs2: fix UBSAN shift-out-of-bounds warnings on mount time".

The first patch fixes a bug reported by syzbot, and the second one fixes the remaining bug of the same kind. Although they are triggered by the same super block data anomaly, I divided it into the above two because the details of the issues and how to fix it are different.

Both are required to eliminate the shift-out-of-bounds issues at mount time.

This patch (of 2):

If the block size exponent information written in an on-disk superblock is corrupted, nilfs_sb2_bad_offset helper function can trigger shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn is set):

shift exponent 38983 is too large for 64-bit type 'unsigned long long'

 Call Trace:
  <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
  ubsan_epilogue lib/ubsan.c:151 [inline]
  __ubsan_handle_shift_out_of_bounds+0x33d/0x3b0 lib/ubsan.c:322
  nilfs_sb2_bad_offset fs/nilfs2/the_nilfs.c:449 [inline]
  nilfs_load_super_block+0xdf5/0xe00 fs/nilfs2/the_nilfs.c:523
  init_nilfs+0xb7/0x7d0 fs/nilfs2/the_nilfs.c:577
  nilfs_fill_super+0xb1/0x5d0 fs/nilfs2/super.c:1047
  nilfs_mount+0x613/0x9b0 fs/nilfs2/super.c:1317
  ...

In addition, since nilfs_sb2_bad_offset() performs multiplication without considering the upper bound, the computation may overflow if the disk layout parameters are not normal.

This fixes these issues by inserting preliminary sanity checks for those parameters and by converting the comparison from one involving multiplication and left bit-shifting to one using division and right bit-shifting.

---
 fs/nilfs2/the_nilfs.c | 31 +++++++++++++++++++++++++++----
 1 file changed, 27 insertions(+), 4 deletions(-)
fs/nilfs2/the_nilfs.c +27 -4
index c8b89b4f94e0..a7c829a7d4f1 100644
@@ -13,6 +13,7 @@
 #include <linux/blkdev.h>
 #include <linux/backing-dev.h>
 #include <linux/random.h>
+#include <linux/log2.h>
 #include <linux/crc32.h>
 #include "nilfs.h"
 #include "segment.h"
@@ -443,11 +444,33 @@ static int nilfs_valid_sb(struct nilfs_super_block *sbp)
 	return crc == le32_to_cpu(sbp->s_sum);
 }
 
-static int nilfs_sb2_bad_offset(struct nilfs_super_block *sbp, u64 offset)
+/**
+ * nilfs_sb2_bad_offset - check the location of the second superblock
+ * @sbp: superblock raw data buffer
+ * @offset: byte offset of second superblock calculated from device size
+ *
+ * nilfs_sb2_bad_offset() checks if the position on the second
+ * superblock is valid or not based on the filesystem parameters
+ * stored in @sbp.  If @offset points to a location within the segment
+ * area, or if the parameters themselves are not normal, it is
+ * determined to be invalid.
+ *
+ * Return Value: true if invalid, false if valid.
+ */
+static bool nilfs_sb2_bad_offset(struct nilfs_super_block *sbp, u64 offset)
 {
-	return offset < ((le64_to_cpu(sbp->s_nsegments) *
-			  le32_to_cpu(sbp->s_blocks_per_segment)) <<
-			 (le32_to_cpu(sbp->s_log_block_size) + 10));
+	unsigned int shift_bits = le32_to_cpu(sbp->s_log_block_size);
+	u32 blocks_per_segment = le32_to_cpu(sbp->s_blocks_per_segment);
+	u64 nsegments = le64_to_cpu(sbp->s_nsegments);
+	u64 index;
+
+	if (blocks_per_segment < NILFS_SEG_MIN_BLOCKS ||
+	    shift_bits > ilog2(NILFS_MAX_BLOCK_SIZE) - BLOCK_SIZE_BITS)
+		return true;
+
+	index = offset >> (shift_bits + BLOCK_SIZE_BITS);
+	do_div(index, blocks_per_segment);
+	return index < nsegments;
 }
 
 static void nilfs_release_super_block(struct the_nilfs *nilfs)
Signature · 1 line
2.35.1
author maintainer
#9 lore raw

PATCH 10/16 nilfs2: fix shift-out-of-bounds due to too large exponent of block size

In reply to Sasha Levin

From: Ryusuke Konishi <[email protected]>

[ Upstream commit ebeccaaef67a4895d2496ab8d9c2fb8d89201211 ]

If field s_log_block_size of superblock data is corrupted and too large, init_nilfs() and load_nilfs() still can trigger a shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn is set):

shift exponent 38973 is too large for 32-bit type 'int'

 Call Trace:
  <TASK>
  dump_stack_lvl+0xcd/0x134
  ubsan_epilogue+0xb/0x50
  __ubsan_handle_shift_out_of_bounds.cold.12+0x17b/0x1f5
  init_nilfs.cold.11+0x18/0x1d [nilfs2]
  nilfs_mount+0x9b5/0x12b0 [nilfs2]
  ...

This fixes the issue by adding and using a new helper function for getting block size with sanity check.

---
 fs/nilfs2/the_nilfs.c | 42 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)
fs/nilfs2/the_nilfs.c +38 -4
index a7c829a7d4f1..2064e6473d30 100644
@@ -193,6 +193,34 @@ static int nilfs_store_log_cursor(struct the_nilfs *nilfs,
 	return ret;
 }
 
+/**
+ * nilfs_get_blocksize - get block size from raw superblock data
+ * @sb: super block instance
+ * @sbp: superblock raw data buffer
+ * @blocksize: place to store block size
+ *
+ * nilfs_get_blocksize() calculates the block size from the block size
+ * exponent information written in @sbp and stores it in @blocksize,
+ * or aborts with an error message if it's too large.
+ *
+ * Return Value: On success, 0 is returned. If the block size is too
+ * large, -EINVAL is returned.
+ */
+static int nilfs_get_blocksize(struct super_block *sb,
+			       struct nilfs_super_block *sbp, int *blocksize)
+{
+	unsigned int shift_bits = le32_to_cpu(sbp->s_log_block_size);
+
+	if (unlikely(shift_bits >
+		     ilog2(NILFS_MAX_BLOCK_SIZE) - BLOCK_SIZE_BITS)) {
+		nilfs_err(sb, "too large filesystem blocksize: 2 ^ %u KiB",
+			  shift_bits);
+		return -EINVAL;
+	}
+	*blocksize = BLOCK_SIZE << shift_bits;
+	return 0;
+}
+
 /**
  * load_nilfs - load and recover the nilfs
  * @nilfs: the_nilfs structure to be released
@@ -246,11 +274,15 @@ int load_nilfs(struct the_nilfs *nilfs, struct super_block *sb)
 		nilfs->ns_sbwtime = le64_to_cpu(sbp[0]->s_wtime);
 
 		/* verify consistency between two super blocks */
-		blocksize = BLOCK_SIZE << le32_to_cpu(sbp[0]->s_log_block_size);
+		err = nilfs_get_blocksize(sb, sbp[0], &blocksize);
+		if (err)
+			goto scan_error;
+
 		if (blocksize != nilfs->ns_blocksize) {
 			nilfs_warn(sb,
 				   "blocksize differs between two super blocks (%d != %d)",
 				   blocksize, nilfs->ns_blocksize);
+			err = -EINVAL;
 			goto scan_error;
 		}
 
@@ -609,9 +641,11 @@ int init_nilfs(struct the_nilfs *nilfs, struct super_block *sb, char *data)
 	if (err)
 		goto failed_sbh;
 
-	blocksize = BLOCK_SIZE << le32_to_cpu(sbp->s_log_block_size);
-	if (blocksize < NILFS_MIN_BLOCK_SIZE ||
-	    blocksize > NILFS_MAX_BLOCK_SIZE) {
+	err = nilfs_get_blocksize(sb, sbp, &blocksize);
+	if (err)
+		goto failed_sbh;
+
+	if (blocksize < NILFS_MIN_BLOCK_SIZE) {
 		nilfs_err(sb,
 			  "couldn't mount because of unsupported filesystem blocksize %d",
 			  blocksize);
Signature · 1 line
2.35.1
author maintainer
#7 lore raw

PATCH 8/16 proc/vmcore: fix potential memory leak in vmcore_init()

In reply to Sasha Levin

From: Jianglei Nie <[email protected]>

[ Upstream commit 12b9d301ff73122aebd78548fa4c04ca69ed78fe ]

Patch series "Some minor cleanup patches resent".

The first three patches trivial clean up patches.

And for the patch "kexec: replace crash_mem_range with range", I got a ibm-p9wr ppc64le system to test, it works well.

This patch (of 4):

elfcorehdr_alloc() allocates a memory chunk for elfcorehdr_addr with kzalloc(). If is_vmcore_usable() returns false, elfcorehdr_addr is a predefined value. If parse_crash_elf_headers() gets some error and returns a negetive value, the elfcorehdr_addr should be released with elfcorehdr_free().

Fix it by calling elfcorehdr_free() when parse_crash_elf_headers() fails.

---
 fs/proc/vmcore.c | 1 +
 1 file changed, 1 insertion(+)
fs/proc/vmcore.c +1 -0
index f2aa86c421f2..74747571d58e 100644
@@ -1567,6 +1567,7 @@ static int __init vmcore_init(void)
 		return rc;
 	rc = parse_crash_elf_headers();
 	if (rc) {
+		elfcorehdr_free(elfcorehdr_addr);
 		pr_warn("Kdump: vmcore not initialized\n");
 		return rc;
 	}
Signature · 7 lines
2.35.1


_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
author maintainer
#4 lore raw

PATCH 5/16 ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value

In reply to Sasha Levin

From: Li Zhong <[email protected]>

[ Upstream commit 2437513a814b3e93bd02879740a8a06e52e2cf7d ]

The return value of acpi_fetch_acpi_dev() could be NULL, which would cause a NULL pointer dereference to occur in acpi_device_hid().

[ rjw: Subject and changelog edits, added empty line after if () ]
---
 drivers/acpi/processor_idle.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/acpi/processor_idle.c +3 -0
index 9f40917c49ef..4d1dd255c122 100644
@@ -1134,6 +1134,9 @@ static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
 	status = acpi_get_parent(handle, &pr_ahandle);
 	while (ACPI_SUCCESS(status)) {
 		d = acpi_fetch_acpi_dev(pr_ahandle);
+		if (!d)
+			break;
+
 		handle = pr_ahandle;
 
 		if (strcmp(acpi_device_hid(d), ACPI_PROCESSOR_CONTAINER_HID))
Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 7/16 ACPICA: Fix error code path in acpi_ds_call_control_method()

In reply to Sasha Levin

From: "Rafael J. Wysocki" <[email protected]>

[ Upstream commit 404ec60438add1afadaffaed34bb5fe4ddcadd40 ]

A use-after-free in acpi_ps_parse_aml() after a failing invocaion of acpi_ds_call_control_method() is reported by KASAN [1] and code inspection reveals that next_walk_state pushed to the thread by acpi_ds_create_walk_state() is freed on errors, but it is not popped from the thread beforehand. Thus acpi_ds_get_current_walk_state() called by acpi_ps_parse_aml() subsequently returns it as the new walk state which is incorrect.

To address this, make acpi_ds_call_control_method() call acpi_ds_pop_walk_state() to pop next_walk_state from the thread before returning an error.

---
 drivers/acpi/acpica/dsmethod.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/acpi/acpica/dsmethod.c +8 -2
index ae2e768830bf..9332bc688713 100644
@@ -517,7 +517,7 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
 	info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
 	if (!info) {
 		status = AE_NO_MEMORY;
-		goto cleanup;
+		goto pop_walk_state;
 	}
 
 	info->parameters = &this_walk_state->operands[0];
@@ -529,7 +529,7 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
 
 	ACPI_FREE(info);
 	if (ACPI_FAILURE(status)) {
-		goto cleanup;
+		goto pop_walk_state;
 	}
 
 	next_walk_state->method_nesting_depth =
@@ -575,6 +575,12 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
 
 	return_ACPI_STATUS(status);
 
+pop_walk_state:
+
+	/* On error, pop the walk state to be deleted from thread */
+
+	acpi_ds_pop_walk_state(thread);
+
 cleanup:
 
 	/* On error, we must terminate the method properly */
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 6/16 ACPI: EC: Add quirk for the HP Pavilion Gaming 15-cx0041ur

In reply to Sasha Levin

From: Mia Kanashi <[email protected]>

[ Upstream commit b423f240a66ad928c4cb5ec6055dfc90ce8d894e ]

Added GPE quirk entry for the HP Pavilion Gaming 15-cx0041ur. There is a quirk entry for the 15-cx0xxx laptops, but this one has different DMI_PRODUCT_NAME.

Notably backlight keys and other ACPI events now function correctly.

---
 drivers/acpi/ec.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/acpi/ec.c +10 -0
index c95e535035a0..fdc760e1e09e 100644
@@ -1879,6 +1879,16 @@ static const struct dmi_system_id ec_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Gaming Laptop 15-cx0xxx"),
 		},
 	},
+	{
+		/*
+		 * HP Pavilion Gaming Laptop 15-cx0041ur
+		 */
+		.callback = ec_honor_dsdt_gpe,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP 15-cx0041ur"),
+		},
+	},
 	{
 		/*
 		 * Samsung hardware
Signature · 1 line
2.35.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/16 fs: jfs: fix shift-out-of-bounds in dbAllocAG

From: Dongliang Mu <[email protected]>

[ Upstream commit 898f706695682b9954f280d95e49fa86ffa55d08 ]

Syzbot found a crash : UBSAN: shift-out-of-bounds in dbAllocAG. The underlying bug is the missing check of bmp->db_agl2size. The field can be greater than 64 and trigger the shift-out-of-bounds.

Fix this bug by adding a check of bmp->db_agl2size in dbMount since this field is used in many following functions. The upper bound for this field is L2MAXL2SIZE - L2MAXAG, thanks for the help of Dave Kleikamp. Note that, for maintenance, I reorganized error handling code of dbMount.

---
 fs/jfs/jfs_dmap.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)
fs/jfs/jfs_dmap.c +16 -6
index 6b838d3ae7c2..e1cbfbb60303 100644
@@ -155,7 +155,7 @@ int dbMount(struct inode *ipbmap)
 	struct bmap *bmp;
 	struct dbmap_disk *dbmp_le;
 	struct metapage *mp;
-	int i;
+	int i, err;
 
 	/*
 	 * allocate/initialize the in-memory bmap descriptor
@@ -170,8 +170,8 @@ int dbMount(struct inode *ipbmap)
 			   BMAPBLKNO << JFS_SBI(ipbmap->i_sb)->l2nbperpage,
 			   PSIZE, 0);
 	if (mp == NULL) {
-		kfree(bmp);
-		return -EIO;
+		err = -EIO;
+		goto err_kfree_bmp;
 	}
 
 	/* copy the on-disk bmap descriptor to its in-memory version. */
@@ -181,9 +181,8 @@ int dbMount(struct inode *ipbmap)
 	bmp->db_l2nbperpage = le32_to_cpu(dbmp_le->dn_l2nbperpage);
 	bmp->db_numag = le32_to_cpu(dbmp_le->dn_numag);
 	if (!bmp->db_numag) {
-		release_metapage(mp);
-		kfree(bmp);
-		return -EINVAL;
+		err = -EINVAL;
+		goto err_release_metapage;
 	}
 
 	bmp->db_maxlevel = le32_to_cpu(dbmp_le->dn_maxlevel);
@@ -194,6 +193,11 @@ int dbMount(struct inode *ipbmap)
 	bmp->db_agwidth = le32_to_cpu(dbmp_le->dn_agwidth);
 	bmp->db_agstart = le32_to_cpu(dbmp_le->dn_agstart);
 	bmp->db_agl2size = le32_to_cpu(dbmp_le->dn_agl2size);
+	if (bmp->db_agl2size > L2MAXL2SIZE - L2MAXAG) {
+		err = -EINVAL;
+		goto err_release_metapage;
+	}
+
 	for (i = 0; i < MAXAG; i++)
 		bmp->db_agfree[i] = le64_to_cpu(dbmp_le->dn_agfree[i]);
 	bmp->db_agsize = le64_to_cpu(dbmp_le->dn_agsize);
@@ -214,6 +218,12 @@ int dbMount(struct inode *ipbmap)
 	BMAP_LOCK_INIT(bmp);
 
 	return (0);
+
+err_release_metapage:
+	release_metapage(mp);
+err_kfree_bmp:
+	kfree(bmp);
+	return err;
 }
 
 
Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH 2/16 udf: Avoid double brelse() in udf_rename()

From: Shigeru Yoshida <[email protected]>

[ Upstream commit c791730f2554a9ebb8f18df9368dc27d4ebc38c2 ]

syzbot reported a warning like below [1]:

VFS: brelse: Trying to free free buffer

WARNING: CPU: 2 PID: 7301 at fs/buffer.c:1145 __brelse+0x67/0xa0
...
Call Trace:
 <TASK>
 invalidate_bh_lru+0x99/0x150
 smp_call_function_many_cond+0xe2a/0x10c0
 ? generic_remap_file_range_prep+0x50/0x50
 ? __brelse+0xa0/0xa0
 ? __mutex_lock+0x21c/0x12d0
 ? smp_call_on_cpu+0x250/0x250
 ? rcu_read_lock_sched_held+0xb/0x60
 ? lock_release+0x587/0x810
 ? __brelse+0xa0/0xa0
 ? generic_remap_file_range_prep+0x50/0x50
 on_each_cpu_cond_mask+0x3c/0x80
 blkdev_flush_mapping+0x13a/0x2f0
 blkdev_put_whole+0xd3/0xf0
 blkdev_put+0x222/0x760
 deactivate_locked_super+0x96/0x160
 deactivate_super+0xda/0x100
 cleanup_mnt+0x222/0x3d0
 task_work_run+0x149/0x240
 ? task_work_cancel+0x30/0x30
 do_exit+0xb29/0x2a40
 ? reacquire_held_locks+0x4a0/0x4a0
 ? do_raw_spin_lock+0x12a/0x2b0
 ? mm_update_next_owner+0x7c0/0x7c0
 ? rwlock_bug.part.0+0x90/0x90
 ? zap_other_threads+0x234/0x2d0
 do_group_exit+0xd0/0x2a0
 __x64_sys_exit_group+0x3a/0x50
 do_syscall_64+0x34/0xb0
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The cause of the issue is that brelse() is called on both ofibh.sbh and ofibh.ebh by udf_find_entry() when it returns NULL. However, brelse() is called by udf_rename(), too. So, b_count on buffer_head becomes unbalanced.

This patch fixes the issue by not calling brelse() by udf_rename() when udf_find_entry() returns NULL.

---
 fs/udf/namei.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
fs/udf/namei.c +4 -4
index 865e658535b1..0e30a50060d9 100644
@@ -1091,8 +1091,9 @@ static int udf_rename(struct user_namespace *mnt_userns, struct inode *old_dir,
 		return -EINVAL;
 
 	ofi = udf_find_entry(old_dir, &old_dentry->d_name, &ofibh, &ocfi);
-	if (IS_ERR(ofi)) {
-		retval = PTR_ERR(ofi);
+	if (!ofi || IS_ERR(ofi)) {
+		if (IS_ERR(ofi))
+			retval = PTR_ERR(ofi);
 		goto end_rename;
 	}
 
@@ -1101,8 +1102,7 @@ static int udf_rename(struct user_namespace *mnt_userns, struct inode *old_dir,
 
 	brelse(ofibh.sbh);
 	tloc = lelb_to_cpu(ocfi.icb.extLocation);
-	if (!ofi || udf_get_lb_pblock(old_dir->i_sb, &tloc, 0)
-	    != old_inode->i_ino)
+	if (udf_get_lb_pblock(old_dir->i_sb, &tloc, 0) != old_inode->i_ino)
 		goto end_rename;
 
 	nfi = udf_find_entry(new_dir, &new_dentry->d_name, &nfibh, &ncfi);
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/16 jfs: Fix fortify moan in symlink

In reply to Sasha Levin

From: "Dr. David Alan Gilbert" <[email protected]>

[ Upstream commit ebe060369f8d6e4588b115f252bebf5ba4d64350 ]

JFS has in jfs_incore.h:

      /* _inline may overflow into _inline_ea when needed */
      /* _inline_ea may overlay the last part of
       * file._xtroot if maxentry = XTROOTINITSLOT
       */
      union {
        struct {
          /* 128: inline symlink */
          unchar _inline[128];
          /* 128: inline extended attr */
          unchar _inline_ea[128];
        };
        unchar _inline_all[256];

and currently the symlink code copies into _inline;
if this is larger than 128 bytes it triggers a fortify warning of the form:

memcpy: detected field-spanning write (size 132) of single field

     "ip->i_link" at fs/jfs/namei.c:950 (size 18446744073709551615)

when it's actually OK.

Copy it into _inline_all instead.

---
 fs/jfs/namei.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/jfs/namei.c +1 -1
index 9db4f5789c0e..4fbbf88435e6 100644
@@ -946,7 +946,7 @@ static int jfs_symlink(struct user_namespace *mnt_userns, struct inode *dip,
 	if (ssize <= IDATASIZE) {
 		ip->i_op = &jfs_fast_symlink_inode_operations;
 
-		ip->i_link = JFS_IP(ip)->i_inline;
+		ip->i_link = JFS_IP(ip)->i_inline_all;
 		memcpy(ip->i_link, name, ssize);
 		ip->i_size = ssize - 1;
 
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/16 fs: jfs: fix shift-out-of-bounds in dbDiscardAG

In reply to Sasha Levin

From: Hoi Pok Wu <[email protected]>

[ Upstream commit 25e70c6162f207828dd405b432d8f2a98dbf7082 ]

This should be applied to most URSAN bugs found recently by syzbot, by guarding the dbMount. As syzbot feeding rubbish into the bmap descriptor.

---
 fs/jfs/jfs_dmap.c | 5 +++++
 1 file changed, 5 insertions(+)
fs/jfs/jfs_dmap.c +5 -0
index e1cbfbb60303..765838578a72 100644
@@ -198,6 +198,11 @@ int dbMount(struct inode *ipbmap)
 		goto err_release_metapage;
 	}
 
+	if (((bmp->db_mapsize - 1) >> bmp->db_agl2size) > MAXAG) {
+		err = -EINVAL;
+		goto err_release_metapage;
+	}
+
 	for (i = 0; i < MAXAG; i++)
 		bmp->db_agfree[i] = le64_to_cpu(dbmp_le->dn_agfree[i]);
 	bmp->db_agsize = le64_to_cpu(dbmp_le->dn_agsize);
Signature · 1 line
2.35.1
author maintainer
#10 lore raw

PATCH 11/16 ACPI / PCI: fix LPIC IRQ model default PCI IRQ polarity

In reply to Sasha Levin

From: Jianmin Lv <[email protected]>

[ Upstream commit d0c50cc4b957b2cf6e43cec4998d212b5abe9220 ]

On LoongArch based systems, the PCI devices (e.g. SATA controllers and PCI-to-PCI bridge controllers) in Loongson chipsets output high-level interrupt signal to the interrupt controller they are connected (see Loongson 7A1000 Bridge User Manual v2.00, sec 5.3, "For the bridge chip, AC97 DMA interrupts are edge triggered, gpio interrupts can be configured to be level triggered or edge triggered as needed, and the rest of the interrupts are level triggered and active high."), while the IRQs are active low from the perspective of PCI (see Conventional PCI spec r3.0, sec 2.2.6, "Interrupts on PCI are optional and defined as level sensitive, asserted low."), which means that the interrupt output of PCI devices plugged into PCI-to-PCI bridges of Loongson chipset will be also converted to high-level. So high level triggered type is required to be passed to acpi_register_gsi() when creating mappings for PCI devices.

---
 drivers/acpi/pci_irq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/acpi/pci_irq.c +4 -2
index 08e15774fb9f..ff30ceca2203 100644
@@ -387,13 +387,15 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 	u8 pin;
 	int triggering = ACPI_LEVEL_SENSITIVE;
 	/*
-	 * On ARM systems with the GIC interrupt model, level interrupts
+	 * On ARM systems with the GIC interrupt model, or LoongArch
+	 * systems with the LPIC interrupt model, level interrupts
 	 * are always polarity high by specification; PCI legacy
 	 * IRQs lines are inverted before reaching the interrupt
 	 * controller and must therefore be considered active high
 	 * as default.
 	 */
-	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
+	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ||
+		       acpi_irq_model == ACPI_IRQ_MODEL_LPIC ?
 				      ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
 	char *link = NULL;
 	char link_desc[16];
Signature · 1 line
2.35.1
author maintainer
#13 lore raw

PATCH 12/16 acct: fix potential integer overflow in encode_comp_t()

In reply to Sasha Levin

From: Zheng Yejian <[email protected]>

[ Upstream commit c5f31c655bcc01b6da53b836ac951c1556245305 ]

The integer overflow is descripted with following codes:

Quoted 3 lines

317 static comp_t encode_comp_t(u64 value)
318 {
319 int exp, rnd;

    ......
Quoted 4 lines
341         exp <<= MANTSIZE;
342         exp += value;
343         return exp;

344 }

Currently comp_t is defined as type of '__u16', but the variable 'exp' is type of 'int', so overflow would happen when variable 'exp' in line 343 is greater than 65535.

---
 kernel/acct.c | 2 ++
 1 file changed, 2 insertions(+)
kernel/acct.c +2 -0
index 13706356ec54..67bde1633d8f 100644
@@ -350,6 +350,8 @@ static comp_t encode_comp_t(unsigned long value)
 		exp++;
 	}
 
+	if (exp > (((comp_t) ~0U) >> MANTSIZE))
+		return (comp_t) ~0U;
 	/*
 	 * Clean it up and polish it off.
 	 */
Signature · 1 line
2.35.1
author maintainer
#14 lore raw

PATCH 13/16 x86/apic: Handle no CONFIG_X86_X2APIC on systems with x2APIC enabled by BIOS

In reply to Sasha Levin

From: Mateusz Jończyk <[email protected]>

[ Upstream commit e3998434da4f5b1f57f8d6a8a9f8502ee3723bae ]

A kernel that was compiled without CONFIG_X86_X2APIC was unable to boot on platforms that have x2APIC already enabled in the BIOS before starting the kernel.

The kernel was supposed to panic with an approprite error message in validate_x2apic() due to the missing X2APIC support.

However, validate_x2apic() was run too late in the boot cycle, and the kernel tried to initialize the APIC nonetheless. This resulted in an earlier panic in setup_local_APIC() because the APIC was not registered.

In my experiments, a panic message in setup_local_APIC() was not visible in the graphical console, which resulted in a hang with no indication what has gone wrong.

Instead of calling panic(), disable the APIC, which results in a somewhat working system with the PIC only (and no SMP). This way the user is able to diagnose the problem more easily.

Disabling X2APIC mode is not an option because it's impossible on systems with locked x2APIC.

The proper place to disable the APIC in this case is in check_x2apic(), which is called early from setup_arch(). Doing this in __apic_intr_mode_select() is too late.

Make check_x2apic() unconditionally available and remove the empty stub.

---
 arch/x86/Kconfig            |  4 ++--
 arch/x86/include/asm/apic.h |  3 +--
 arch/x86/kernel/apic/apic.c | 13 ++++++++-----
 3 files changed, 11 insertions(+), 9 deletions(-)
arch/x86/Kconfig +2 -2
index 4728d3f5d5c4..3fec0e9d9241 100644
@@ -450,8 +450,8 @@ config X86_X2APIC
 
 	  Some Intel systems circa 2022 and later are locked into x2APIC mode
 	  and can not fall back to the legacy APIC modes if SGX or TDX are
-	  enabled in the BIOS.  They will be unable to boot without enabling
-	  this option.
+	  enabled in the BIOS. They will boot with very reduced functionality
+	  without enabling this option.
 
 	  If you don't know what to do here, say N.
 
arch/x86/include/asm/apic.h +1 -2
index 3415321c8240..3216da7074ba 100644
@@ -249,7 +249,6 @@ static inline u64 native_x2apic_icr_read(void)
 extern int x2apic_mode;
 extern int x2apic_phys;
 extern void __init x2apic_set_max_apicid(u32 apicid);
-extern void __init check_x2apic(void);
 extern void x2apic_setup(void);
 static inline int x2apic_enabled(void)
 {
@@ -258,13 +257,13 @@ static inline int x2apic_enabled(void)
 
 #define x2apic_supported()	(boot_cpu_has(X86_FEATURE_X2APIC))
 #else /* !CONFIG_X86_X2APIC */
-static inline void check_x2apic(void) { }
 static inline void x2apic_setup(void) { }
 static inline int x2apic_enabled(void) { return 0; }
 
 #define x2apic_mode		(0)
 #define	x2apic_supported()	(0)
 #endif /* !CONFIG_X86_X2APIC */
+extern void __init check_x2apic(void);
 
 struct irq_data;
 
arch/x86/kernel/apic/apic.c +8 -5
index c6876d3ea4b1..20d9a604da7c 100644
@@ -1931,16 +1931,19 @@ void __init check_x2apic(void)
 	}
 }
 #else /* CONFIG_X86_X2APIC */
-static int __init validate_x2apic(void)
+void __init check_x2apic(void)
 {
 	if (!apic_is_x2apic_enabled())
-		return 0;
+		return;
 	/*
-	 * Checkme: Can we simply turn off x2apic here instead of panic?
+	 * Checkme: Can we simply turn off x2APIC here instead of disabling the APIC?
 	 */
-	panic("BIOS has enabled x2apic but kernel doesn't support x2apic, please disable x2apic in BIOS.\n");
+	pr_err("Kernel does not support x2APIC, please recompile with CONFIG_X86_X2APIC.\n");
+	pr_err("Disabling APIC, expect reduced performance and functionality.\n");
+
+	disable_apic = 1;
+	setup_clear_cpu_cap(X86_FEATURE_APIC);
 }
-early_initcall(validate_x2apic);
 
 static inline void try_to_enable_x2apic(int remap_mode) { }
 static inline void __x2apic_enable(void) { }
Signature · 1 line
2.35.1
author maintainer
#15 lore raw

PATCH 14/16 ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit fe820db35275561d8bf86ad19044d40ffc95bc04 ]

The Lenovo Yoga Tab 3 Pro (YT3-X90F) is a x86 (Cherry Trail) tablet which ships with Android x86 as factory OS. The Android x86 kernel fork ignores I2C devices described in the DSDT, except for the PMIC and Audio codecs.

As usual the Lenovo Yoga Tab 3 Pro's DSDT contains a bunch of extra I2C devices which are not actually there, causing various resource conflicts. Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Tab 3 Pro to the acpi_quirk_skip_dmi_ids table to woraround this.

ACPI_QUIRK_SKIP_I2C_CLIENTS handling uses i2c_acpi_known_good_ids[], so that PMICs and Audio codecs will still be enumerated properly. The Lenovo Yoga Tab 3 Pro uses a Whiskey Cove PMIC, add the INT34D3 HID for this PMIC to the i2c_acpi_known_good_ids[] list.

---
 drivers/acpi/x86/utils.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/acpi/x86/utils.c +12 -1
index 950a93922ca8..fb999597a3f0 100644
@@ -308,7 +308,7 @@ static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = {
 					ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY),
 	},
 	{
-		/* Lenovo Yoga Tablet 1050F/L */
+		/* Lenovo Yoga Tablet 2 1050F/L */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"),
@@ -319,6 +319,16 @@ static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = {
 		.driver_data = (void *)(ACPI_QUIRK_SKIP_I2C_CLIENTS |
 					ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY),
 	},
+	{
+		/* Lenovo Yoga Tab 3 Pro X90F */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Blade3-10A-001"),
+		},
+		.driver_data = (void *)(ACPI_QUIRK_SKIP_I2C_CLIENTS |
+					ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY),
+	},
 	{
 		/* Nextbook Ares 8 */
 		.matches = {
@@ -348,6 +358,7 @@ static const struct acpi_device_id i2c_acpi_known_good_ids[] = {
 	{ "10EC5640", 0 }, /* RealTek ALC5640 audio codec */
 	{ "INT33F4", 0 },  /* X-Powers AXP288 PMIC */
 	{ "INT33FD", 0 },  /* Intel Crystal Cove PMIC */
+	{ "INT34D3", 0 },  /* Intel Whiskey Cove PMIC */
 	{ "NPCE69A", 0 },  /* Asus Transformer keyboard dock */
 	{}
 };
Signature · 1 line
2.35.1
author maintainer
#16 lore raw

PATCH 15/16 ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit ecc6aaabcedc276128315f57755364106017c606 ]

The Medion Lifetab S10346 is a x86 tablet which ships with Android x86 as factory OS. The Android x86 kernel fork ignores I2C devices described in the DSDT, except for the PMIC and Audio codecs.

As usual the Medion Lifetab S10346's DSDT contains a bunch of extra I2C devices which are not actually there, causing various resource conflicts. Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Medion Lifetab S10346 to the acpi_quirk_skip_dmi_ids table to woraround this.

---
 drivers/acpi/x86/utils.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/acpi/x86/utils.c +11 -0
index fb999597a3f0..ae60e4aae0ee 100644
@@ -329,6 +329,17 @@ static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = {
 		.driver_data = (void *)(ACPI_QUIRK_SKIP_I2C_CLIENTS |
 					ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY),
 	},
+	{
+		/* Medion Lifetab S10346 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Way too generic, also match on BIOS data */
+			DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"),
+		},
+		.driver_data = (void *)(ACPI_QUIRK_SKIP_I2C_CLIENTS |
+					ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY),
+	},
 	{
 		/* Nextbook Ares 8 */
 		.matches = {
Signature · 1 line
2.35.1
author maintainer
#17 lore raw

PATCH 16/16 hfs: fix OOB Read in __hfs_brec_find

In reply to Sasha Levin

From: ZhangPeng <[email protected]>

[ Upstream commit 8d824e69d9f3fa3121b2dda25053bae71e2460d2 ]

Syzbot reported a OOB read bug:

==================================================================

BUG: KASAN: slab-out-of-bounds in hfs_strcmp+0x117/0x190
fs/hfs/string.c:84
Read of size 1 at addr ffff88807eb62c4e by task kworker/u4:1/11
CPU: 1 PID: 11 Comm: kworker/u4:1 Not tainted
6.1.0-rc6-syzkaller-00308-g644e9524388a #0
Workqueue: writeback wb_workfn (flush-7:0)
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
 print_address_description+0x74/0x340 mm/kasan/report.c:284
 print_report+0x107/0x1f0 mm/kasan/report.c:395
 kasan_report+0xcd/0x100 mm/kasan/report.c:495
 hfs_strcmp+0x117/0x190 fs/hfs/string.c:84
 __hfs_brec_find+0x213/0x5c0 fs/hfs/bfind.c:75
 hfs_brec_find+0x276/0x520 fs/hfs/bfind.c:138
 hfs_write_inode+0x34c/0xb40 fs/hfs/inode.c:462
 write_inode fs/fs-writeback.c:1440 [inline]

If the input inode of hfs_write_inode() is incorrect:
struct inode
struct hfs_inode_info
struct hfs_cat_key
struct hfs_name
u8 len # len is greater than HFS_NAMELEN(31) which is the
maximum length of an HFS filename

OOB read occurred:
hfs_write_inode()
hfs_brec_find()
__hfs_brec_find()
hfs_cat_keycmp()
hfs_strcmp() # OOB read occurred due to len is too large

Fix this by adding a Check on len in hfs_write_inode() before calling hfs_brec_find().

---
 fs/hfs/inode.c | 2 ++
 1 file changed, 2 insertions(+)
fs/hfs/inode.c +2 -0
index c4526f16355d..a0746be3c1de 100644
@@ -458,6 +458,8 @@ int hfs_write_inode(struct inode *inode, struct writeback_control *wbc)
 		/* panic? */
 		return -EIO;
 
+	if (HFS_I(main_inode)->cat_key.CName.len > HFS_NAMELEN)
+		return -EIO;
 	fd.search_key->cat = HFS_I(main_inode)->cat_key;
 	if (hfs_brec_find(&fd))
 		/* panic? */
Signature · 1 line
2.35.1
#11 lore raw

Re: [PATCH AUTOSEL 6.0 11/16] ACPI / PCI: fix LPIC IRQ model default PCI IRQ polarity

In reply to Sasha Levin
Quoted 40 lines · Sasha Levin

From: Jianmin Lv <[email protected]>

[ Upstream commit d0c50cc4b957b2cf6e43cec4998d212b5abe9220 ]

On LoongArch based systems, the PCI devices (e.g. SATA controllers and PCI-to-PCI bridge controllers) in Loongson chipsets output high-level interrupt signal to the interrupt controller they are connected (see Loongson 7A1000 Bridge User Manual v2.00, sec 5.3, "For the bridge chip, AC97 DMA interrupts are edge triggered, gpio interrupts can be configured to be level triggered or edge triggered as needed, and the rest of the interrupts are level triggered and active high."), while the IRQs are active low from the perspective of PCI (see Conventional PCI spec r3.0, sec 2.2.6, "Interrupts on PCI are optional and defined as level sensitive, asserted low."), which means that the interrupt output of PCI devices plugged into PCI-to-PCI bridges of Loongson chipset will be also converted to high-level. So high level triggered type is required to be passed to acpi_register_gsi() when creating mappings for PCI devices.

---
 drivers/acpi/pci_irq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/acpi/pci_irq.c +2 -1
index 08e15774fb9f..ff30ceca2203 100644
@@ -387,13 +387,15 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 	u8 pin;
 	int triggering = ACPI_LEVEL_SENSITIVE;
 	/*
-	 * On ARM systems with the GIC interrupt model, level interrupts
+	 * On ARM systems with the GIC interrupt model, or LoongArch
+	 * systems with the LPIC interrupt model, level interrupts
 	 * are always polarity high by specification; PCI legacy

drivers/acpi/pci_irq.c int acpi_pci_irq_enable(struct pci_dev *dev) · line 401

Quoted 10 lines
drivers/acpi/pci_irq.c +2 -1
 	 * IRQs lines are inverted before reaching the interrupt
 	 * controller and must therefore be considered active high
 	 * as default.
 	 */
-	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
+	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ||
+		       acpi_irq_model == ACPI_IRQ_MODEL_LPIC ?
 				      ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
 	char *link = NULL;
 	char link_desc[16];

This is pointless on its own too, as it requires plenty of other changes, none of which are stable candidates. Please drop this as well as the v6.1 backport.

Thanks,

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
author maintainer
#12 lore raw

Re: [PATCH AUTOSEL 6.0 11/16] ACPI / PCI: fix LPIC IRQ model default PCI IRQ polarity

Quoted 48 lines · Marc Zyngier
Quoted 46 lines · Sasha Levin

From: Jianmin Lv <[email protected]>

[ Upstream commit d0c50cc4b957b2cf6e43cec4998d212b5abe9220 ]

On LoongArch based systems, the PCI devices (e.g. SATA controllers and PCI-to-PCI bridge controllers) in Loongson chipsets output high-level interrupt signal to the interrupt controller they are connected (see Loongson 7A1000 Bridge User Manual v2.00, sec 5.3, "For the bridge chip, AC97 DMA interrupts are edge triggered, gpio interrupts can be configured to be level triggered or edge triggered as needed, and the rest of the interrupts are level triggered and active high."), while the IRQs are active low from the perspective of PCI (see Conventional PCI spec r3.0, sec 2.2.6, "Interrupts on PCI are optional and defined as level sensitive, asserted low."), which means that the interrupt output of PCI devices plugged into PCI-to-PCI bridges of Loongson chipset will be also converted to high-level. So high level triggered type is required to be passed to acpi_register_gsi() when creating mappings for PCI devices.

---
 drivers/acpi/pci_irq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/acpi/pci_irq.c +3 -2
index 08e15774fb9f..ff30ceca2203 100644
@@ -387,13 +387,15 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 	u8 pin;
 	int triggering = ACPI_LEVEL_SENSITIVE;
 	/*
-	 * On ARM systems with the GIC interrupt model, level interrupts
+	 * On ARM systems with the GIC interrupt model, or LoongArch
+	 * systems with the LPIC interrupt model, level interrupts
 	 * are always polarity high by specification; PCI legacy
 	 * IRQs lines are inverted before reaching the interrupt
 	 * controller and must therefore be considered active high
 	 * as default.
 	 */
-	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
+	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ||
Quoted 8 lines

drivers/acpi/pci_irq.c int acpi_pci_irq_enable(struct pci_dev *dev) · line 401

Quoted 4 lines
drivers/acpi/pci_irq.c +1 -0
+		       acpi_irq_model == ACPI_IRQ_MODEL_LPIC ?
 				      ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
 	char *link = NULL;
 	char link_desc[16];

This is pointless on its own too, as it requires plenty of other changes, none of which are stable candidates. Please drop this as well as the v6.1 backport.

Ack, will do. Thanks!

Signature · 2 lines
Thanks,
Sasha