i2c: designware: use casting of u64 in clock multiplication to avoid overflow
Subsystems (3)
PATCH v5 1/1 i2c: designware: use casting of u64 in clock multiplication to avoid overflow
From: Lareine Khawaly <[email protected]>
In functions i2c_dw_scl_lcnt() and i2c_dw_scl_hcnt() may have overflow by depending on the values of the given parameters including the ic_clk. For example in our use case where ic_clk is larger than one million, multiplication of ic_clk * 4700 will result in 32 bit overflow.
Add cast of u64 to the calculation to avoid multiplication overflow, and use the corresponding define for divide.
---
Change log v4->v5:
- Fix indentation
Change Log v3->v4:
- update line length when possible
- fix change log location in the patch
Change Log v2->v3:
- Avoid changing the ic_clk parameter to u64, and do casting in the calculation itself instead.
- i2c_dw_clk_rate() returns unsigned long which is confusing because the function return the value of get_clk_rate_khz() which returns u32. This is not effect the overflow issue, pushed change in separated patch.
- use DIV_ROUND_CLOSEST_ULL instead of DIV_ROUND_CLOSEST
Change Log v1->v2:
- Update commit message and add fix tag.
drivers/i2c/busses/i2c-designware-common.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +6 -3
@@ -351,7 +351,8 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)* * If your hardware is free from tHD;STA issue, try this one. */ -return DIV_ROUND_CLOSEST (ic_clk * tSYMBOL,MICRO ) -8 + offset; +return DIV_ROUND_CLOSEST_ULL ((u64 )ic_clk * tSYMBOL,MICRO ) - +8 + offset; else/* * Conditional expression:
@@ -367,7 +368,8 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)* The reason why we need to take into account "tf" here, * is the same as described in i2c_dw_scl_lcnt(). */ -return DIV_ROUND_CLOSEST (ic_clk * (tSYMBOL + tf),MICRO ) -3 + offset; +return DIV_ROUND_CLOSEST_ULL ((u64 )ic_clk * (tSYMBOL + tf),MICRO ) - +3 + offset; }u32 i2c_dw_scl_lcnt (u32 ic_clk,u32 tLOW,u32 tf,int offset)
@@ -383,7 +385,8 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)* account the fall time of SCL signal (tf). Default tf value * should be 0.3 us, for safety. */ -return DIV_ROUND_CLOSEST (ic_clk * (tLOW + tf),MICRO ) -1 + offset; +return DIV_ROUND_CLOSEST_ULL ((u64 )ic_clk * (tLOW + tf),MICRO ) - +1 + offset; }int i2c_dw_set_sda_hold (struct dw_i2c_dev *dev)
Signature · 1 line
2.38.1
Quoted 9 lines · Hanna Hawa
From: Lareine Khawaly <[email protected]>
In functions
i2c_dw_scl_lcnt()andi2c_dw_scl_hcnt()may have overflow by depending on the values of the given parameters including theic_clk. For example in our use case whereic_clkis larger than one million, multiplication ofic_clk* 4700 will result in 32 bit overflow.Add cast of u64 to the calculation to avoid multiplication overflow, and use the corresponding define for divide.
Perfect, thank you!
Quoted 63 lines
Fixes 2373f6b9744d ("i2c-designware: split of i2c-designware.c into core and bus specific parts")Signed-off-by Lareine Khawaly <[email protected]>Signed-off-by Hanna Hawa <[email protected]>---
Change logv4->v5:
- Fix indentationChange Log
v3->v4:
- update line length when possible
- fix change log location in the patchChange Log
v2->v3:
- Avoid changing theic_clkparameter to u64, and do casting in the calculation itself instead.
-i2c_dw_clk_rate()returns unsigned long which is confusing because the function return the value ofget_clk_rate_khz()which returns u32. This is not effect the overflow issue, pushed change in separated patch.
- useDIV_ROUND_CLOSEST_ULLinstead ofDIV_ROUND_CLOSESTChange Log
v1->v2:
- Update commit message and add fix tag.drivers/i2c/busses/i2c-designware-common.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)drivers/i2c/busses/i2c-designware-common.c +6
-3@@ -351,7 +351,8 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)* * If your hardware is free from tHD;STA issue, try this one. */ -return DIV_ROUND_CLOSEST (ic_clk * tSYMBOL,MICRO ) -8 + offset; +return DIV_ROUND_CLOSEST_ULL ((u64 )ic_clk * tSYMBOL,MICRO ) - +8 + offset; else/* * Conditional expression: @@ -367,7 +368,8 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)* The reason why we need to take into account "tf" here, * is the same as described in i2c_dw_scl_lcnt(). */ -return DIV_ROUND_CLOSEST (ic_clk * (tSYMBOL + tf),MICRO ) -3 + offset; +return DIV_ROUND_CLOSEST_ULL ((u64 )ic_clk * (tSYMBOL + tf),MICRO ) - +3 + offset; }u32 i2c_dw_scl_lcnt (u32 ic_clk,u32 tLOW,u32 tf,int offset)@@ -383,7 +385,8 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)* account the fall time of SCL signal (tf). Default tf value * should be 0.3 us, for safety. */ -return DIV_ROUND_CLOSEST (ic_clk * (tLOW + tf),MICRO ) -1 + offset; +return DIV_ROUND_CLOSEST_ULL ((u64 )ic_clk * (tLOW + tf),MICRO ) - +1 + offset; }int i2c_dw_set_sda_hold (struct dw_i2c_dev *dev)Signature · 1 line
2.38.1
Signature · 2 lines
With Best Regards, Andy Shevchenko
Jarkko Nikula
Acked-byQuoted 8 lines · Andy Shevchenko
Quoted 7 lines · Hanna Hawa
From: Lareine Khawaly <[email protected]>
In functions
i2c_dw_scl_lcnt()andi2c_dw_scl_hcnt()may have overflow by depending on the values of the given parameters including theic_clk. For example in our use case whereic_clkis larger than one million, multiplication ofic_clk* 4700 will result in 32 bit overflow.
Quoted 6 lines
Quoted 2 lines
Add cast of u64 to the calculation to avoid multiplication overflow, and use the corresponding define for divide.
Perfect, thank you!
Reviewed-by Andy Shevchenko <[email protected]>
Wolfram Sang
AppliedQuoted 7 lines · Hanna Hawa
From: Lareine Khawaly <[email protected]>
In functions
i2c_dw_scl_lcnt()andi2c_dw_scl_hcnt()may have overflow by depending on the values of the given parameters including theic_clk. For example in our use case whereic_clkis larger than one million, multiplication ofic_clk* 4700 will result in 32 bit overflow.
Quoted 6 lines
Add cast of u64 to the calculation to avoid multiplication overflow, and use the corresponding define for divide.
Fixes 2373f6b9744d ("i2c-designware: split of i2c-designware.c into core and bus specific parts")Signed-off-by Lareine Khawaly <[email protected]>Signed-off-by Hanna Hawa <[email protected]>
Applied to for-current, thanks!