board: at91: sam9x60: set blue led on at boot time
PATCH 1/1 board: at91: sam9x60: set blue led on at boot time
Set blue led on at boot time in order to highlight that u-boot is loaded. This is done for all sam9x60 based boards which contain an RGB led.
Signed-off-by Mihai Sain <[email protected]>
--- board/atmel/sam9x60_curiosity/sam9x60_curiosity.c | 10 ++++++++++ board/atmel/sam9x60ek/sam9x60ek.c | 9 +++++++++ 2 files changed, 19 insertions(+)
board/atmel/sam9x60_curiosity/sam9x60_curiosity.c +10 -0
@@ -25,6 +25,13 @@ DECLARE_GLOBAL_DATA_PTR;void at91_prepare_cpu_var (void ); +static void board_leds_init (void ) +{ +at91_set_pio_output (AT91_PIO_PORTD ,17 ,0 );/* LED RED */ +at91_set_pio_output (AT91_PIO_PORTD ,19 ,0 );/* LED GREEN */ +at91_set_pio_output (AT91_PIO_PORTD ,21 ,1 );/* LED BLUE */ +} +int board_late_init (void ) {at91_prepare_cpu_var ();
@@ -62,6 +69,9 @@ int board_init(void) {/* address of boot parameters */ gd->bd->bi_boot_params = gd->bd->bi_dram[0 ].start +0x100 ; + +board_leds_init (); +return 0 ; }
board/atmel/sam9x60ek/sam9x60ek.c +9 -0
@@ -24,6 +24,13 @@ DECLARE_GLOBAL_DATA_PTR;void at91_prepare_cpu_var (void ); +static void board_leds_init (void ) +{ +at91_set_pio_output (AT91_PIO_PORTB ,11 ,0 );/* LED RED */ +at91_set_pio_output (AT91_PIO_PORTB ,12 ,0 );/* LED GREEN */ +at91_set_pio_output (AT91_PIO_PORTB ,13 ,1 );/* LED BLUE */ +} +#ifdef CONFIG_BOARD_LATE_INIT int board_late_init (void ) {
@@ -66,6 +73,8 @@ int board_init(void)/* address of boot parameters */ gd->bd->bi_boot_params =CONFIG_SYS_SDRAM_BASE +0x100 ; +board_leds_init (); +return 0 ; }
Signature · 1 line
2.39.0
Quoted 5 lines · Mihai Sain
Set blue led on at boot time in order to highlight that u-boot is loaded. This is done for all sam9x60 based boards which contain an RGB led.
Signed-off-by Mihai Sain <[email protected]>---
Applied to u-boot-at91/next, thanks !