Skip to contentSkip to conversation

only allow unprivileged passthrough for commands without effects v4

PATCH In review Christoph Hellwig 4 participants 19 messages Dec 23, 2022 – Dec 29, 2022

Subsystems (2)
lore
Share & tools
lore

Christoph Hellwig

author maintainer
#0 lore raw

Hi all,

this series first fixes a few minor issues in the CES log support in the host and target drivers and then uses the log to deny unprivileged passthrough of commands that have effects, where the only practically relevant effect is the modification of contents of the data stored in the namespace.

Changes since v3:
- clear NVME_CMD_EFFECTS_CSE_MASK for I/O commands

Changes since v2:
- drop various cleanups and aim for a minimum viable fix for 6.2
- fix the NVME_CMD_EFFECTS_CSE_MASK definition
- don't allow unprivilged passthrough without a Commands Supported and Effects log

Changes since v1:
- make sure ctrl->effects an nshead->effects is always available
- initializse known effects at init time
- remove the use_workqueue field in nvmet_req
- fix up a commit message

Diffstat:

 drivers/nvme/host/core.c        |   32 ++++++++++++++++++++++++++------
 drivers/nvme/host/ioctl.c       |   28 ++++++++++++++++++++++++----
 drivers/nvme/target/admin-cmd.c |   37 +++++++++++++++++++++----------------
 drivers/nvme/target/passthru.c  |   11 +++++------
 include/linux/nvme.h            |    4 +++-
 5 files changed, 79 insertions(+), 33 deletions(-)
author maintainer
#1 lore raw

PATCH 1/6 nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition

3 << 16 does not generate the correct mask for bits 16, 17 and 18. Use the GENMASK macro to generate the correct mask instead.

Fixes 84fef62d135b ("nvme: check admin passthru command effects")
---
 include/linux/nvme.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/linux/nvme.h +2 -1
index d6be2a6861000e..d1cd53f2b6abd9 100644
@@ -7,6 +7,7 @@
 #ifndef _LINUX_NVME_H
 #define _LINUX_NVME_H
 
+#include <linux/bits.h>
 #include <linux/types.h>
 #include <linux/uuid.h>
 
@@ -639,7 +640,7 @@ enum {
 	NVME_CMD_EFFECTS_NCC		= 1 << 2,
 	NVME_CMD_EFFECTS_NIC		= 1 << 3,
 	NVME_CMD_EFFECTS_CCC		= 1 << 4,
-	NVME_CMD_EFFECTS_CSE_MASK	= 3 << 16,
+	NVME_CMD_EFFECTS_CSE_MASK	= GENMASK(18, 16),
 	NVME_CMD_EFFECTS_UUID_SEL	= 1 << 19,
 };
 
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 2/6 nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it

In reply to Christoph Hellwig

Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a single value to multiple array entries instead of repeated assignments.

---
 drivers/nvme/target/admin-cmd.c | 35 ++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 16 deletions(-)
drivers/nvme/target/admin-cmd.c +19 -16
index 53a004ea320c1f..111a5cb6403fb0 100644
@@ -164,26 +164,29 @@ static void nvmet_execute_get_log_page_smart(struct nvmet_req *req)
 
 static void nvmet_get_cmd_effects_nvm(struct nvme_effects_log *log)
 {
-	log->acs[nvme_admin_get_log_page]	= cpu_to_le32(1 << 0);
-	log->acs[nvme_admin_identify]		= cpu_to_le32(1 << 0);
-	log->acs[nvme_admin_abort_cmd]		= cpu_to_le32(1 << 0);
-	log->acs[nvme_admin_set_features]	= cpu_to_le32(1 << 0);
-	log->acs[nvme_admin_get_features]	= cpu_to_le32(1 << 0);
-	log->acs[nvme_admin_async_event]	= cpu_to_le32(1 << 0);
-	log->acs[nvme_admin_keep_alive]		= cpu_to_le32(1 << 0);
-
-	log->iocs[nvme_cmd_read]		= cpu_to_le32(1 << 0);
-	log->iocs[nvme_cmd_write]		= cpu_to_le32(1 << 0);
-	log->iocs[nvme_cmd_flush]		= cpu_to_le32(1 << 0);
-	log->iocs[nvme_cmd_dsm]			= cpu_to_le32(1 << 0);
-	log->iocs[nvme_cmd_write_zeroes]	= cpu_to_le32(1 << 0);
+	log->acs[nvme_admin_get_log_page] =
+	log->acs[nvme_admin_identify] =
+	log->acs[nvme_admin_abort_cmd] =
+	log->acs[nvme_admin_set_features] =
+	log->acs[nvme_admin_get_features] =
+	log->acs[nvme_admin_async_event] =
+	log->acs[nvme_admin_keep_alive] =
+		cpu_to_le32(NVME_CMD_EFFECTS_CSUPP);
+
+	log->iocs[nvme_cmd_read] =
+	log->iocs[nvme_cmd_write] =
+	log->iocs[nvme_cmd_flush] =
+	log->iocs[nvme_cmd_dsm]	=
+	log->iocs[nvme_cmd_write_zeroes] =
+		cpu_to_le32(NVME_CMD_EFFECTS_CSUPP);
 }
 
 static void nvmet_get_cmd_effects_zns(struct nvme_effects_log *log)
 {
-	log->iocs[nvme_cmd_zone_append]		= cpu_to_le32(1 << 0);
-	log->iocs[nvme_cmd_zone_mgmt_send]	= cpu_to_le32(1 << 0);
-	log->iocs[nvme_cmd_zone_mgmt_recv]	= cpu_to_le32(1 << 0);
+	log->iocs[nvme_cmd_zone_append] =
+	log->iocs[nvme_cmd_zone_mgmt_send] =
+	log->iocs[nvme_cmd_zone_mgmt_recv] =
+		cpu_to_le32(NVME_CMD_EFFECTS_CSUPP);
 }
 
 static void nvmet_execute_get_log_cmd_effects_ns(struct nvmet_req *req)
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 3/6 nvmet: set the LBCC bit for commands that modify data

In reply to Christoph Hellwig

Write, Write Zeroes, Zone append and a Zone Reset through Zone Management Send modify the logical block content of a namespace, so make sure the LBCC bit is reported for them.

Fixes b5d0b38c0475 ("nvmet: add Command Set Identifier support")
---
 drivers/nvme/target/admin-cmd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/nvme/target/admin-cmd.c +4 -2
index 111a5cb6403fb0..6a54ed6fb12144 100644
@@ -174,17 +174,19 @@ static void nvmet_get_cmd_effects_nvm(struct nvme_effects_log *log)
 		cpu_to_le32(NVME_CMD_EFFECTS_CSUPP);
 
 	log->iocs[nvme_cmd_read] =
-	log->iocs[nvme_cmd_write] =
 	log->iocs[nvme_cmd_flush] =
 	log->iocs[nvme_cmd_dsm]	=
-	log->iocs[nvme_cmd_write_zeroes] =
 		cpu_to_le32(NVME_CMD_EFFECTS_CSUPP);
+	log->iocs[nvme_cmd_write] =
+	log->iocs[nvme_cmd_write_zeroes] =
+		cpu_to_le32(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC);
 }
 
 static void nvmet_get_cmd_effects_zns(struct nvme_effects_log *log)
 {
 	log->iocs[nvme_cmd_zone_append] =
 	log->iocs[nvme_cmd_zone_mgmt_send] =
+		cpu_to_le32(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC);
 	log->iocs[nvme_cmd_zone_mgmt_recv] =
 		cpu_to_le32(NVME_CMD_EFFECTS_CSUPP);
 }
Signature · 1 line
2.35.1
author maintainer
#7 lore raw

PATCH 4/6 nvmet: don't defer passthrough commands with trivial effects to the workqueue

In reply to Christoph Hellwig

Mask out the "Command Supported" and "Logical Block Content Change" bits and only defer execution of commands that have non-trivial effects to the workqueue for synchronous execution. This allows to execture admin commands asynchronously on controllers that provide a Command Supported and Effects log page, and will keep allowing to execute Write commands asynchronously once command effects on I/O commands are taken into account.

Fixes c1fef73f793b ("nvmet: add passthru code to process commands")
---
 drivers/nvme/target/passthru.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/nvme/target/passthru.c +5 -6
index 79af5140af8bfe..adc0958755d66f 100644
@@ -334,14 +334,13 @@ static void nvmet_passthru_execute_cmd(struct nvmet_req *req)
 	}
 
 	/*
-	 * If there are effects for the command we are about to execute, or
-	 * an end_req function we need to use nvme_execute_passthru_rq()
-	 * synchronously in a work item seeing the end_req function and
-	 * nvme_passthru_end() can't be called in the request done callback
-	 * which is typically in interrupt context.
+	 * If a command needs post-execution fixups, or there are any
+	 * non-trivial effects, make sure to execute the command synchronously
+	 * in a workqueue so that nvme_passthru_end gets called.
 	 */
 	effects = nvme_command_effects(ctrl, ns, req->cmd->common.opcode);
-	if (req->p.use_workqueue || effects) {
+	if (req->p.use_workqueue ||
+	    (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC))) {
 		INIT_WORK(&req->p.work, nvmet_passthru_execute_cmd_work);
 		req->p.rq = rq;
 		queue_work(nvmet_wq, &req->p.work);
Signature · 1 line
2.35.1
maintainer Reviewed-by Reviewed-by on v1 4/6
#8 lore raw

Re: [PATCH 4/6] nvmet: don't defer passthrough commands with trivial effects to the workqueue

Quoted 3 lines · Christoph Hellwig

Mask out the "Command Supported" and "Logical Block Content Change" bits and only defer execution of commands that have non-trivial effects to the workqueue for synchronous execution. This allows to execture admin

allows to execute admin

Quoted 26 lines

commands asynchronously on controllers that provide a Command Supported and Effects log page, and will keep allowing to execute Write commands asynchronously once command effects on I/O commands are taken into account.

Fixes c1fef73f793b ("nvmet: add passthru code to process commands")
---
  drivers/nvme/target/passthru.c | 11 +++++------
  1 file changed, 5 insertions(+), 6 deletions(-)
drivers/nvme/target/passthru.c +1 -5
index 79af5140af8bfe..adc0958755d66f 100644
@@ -334,14 +334,13 @@ static void nvmet_passthru_execute_cmd(struct nvmet_req *req)
  	}
 
  	/*
-	 * If there are effects for the command we are about to execute, or
-	 * an end_req function we need to use nvme_execute_passthru_rq()
-	 * synchronously in a work item seeing the end_req function and
-	 * nvme_passthru_end() can't be called in the request done callback
-	 * which is typically in interrupt context.
+	 * If a command needs post-execution fixups, or there are any

drivers/nvme/target/passthru.c static void nvmet_passthru_execute_cmd(struct nvmet_req *req) · line 346

Quoted 10 lines
drivers/nvme/target/passthru.c +4 -1
+	 * non-trivial effects, make sure to execute the command synchronously
+	 * in a workqueue so that nvme_passthru_end gets called.
  	 */
  	effects = nvme_command_effects(ctrl, ns, req->cmd->common.opcode);
-	if (req->p.use_workqueue || effects) {
+	if (req->p.use_workqueue ||
+	    (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC))) {
  		INIT_WORK(&req->p.work, nvmet_passthru_execute_cmd_work);
  		req->p.rq = rq;
  		queue_work(nvmet_wq, &req->p.work);

Other than that,

author maintainer
#9 lore raw

PATCH 5/6 nvme: also return I/O command effects from nvme_command_effects

In reply to Christoph Hellwig

To be able to use the Commands Supported and Effects Log for allowing unprivileged passtrough, it needs to be corretly reported for I/O commands as well. Return the I/O command effects from nvme_command_effects, and also add a default list of effects for the NVM command set. For other command sets, the Commands Supported and Effects log is required to be present already.

---
 drivers/nvme/host/core.c | 32 ++++++++++++++++++++++++++------
 1 file changed, 26 insertions(+), 6 deletions(-)
drivers/nvme/host/core.c +26 -6
index e26b085a007aea..21d79c186d8c14 100644
@@ -1074,6 +1074,18 @@ static u32 nvme_known_admin_effects(u8 opcode)
 	return 0;
 }
 
+static u32 nvme_known_nvm_effects(u8 opcode)
+{
+	switch (opcode) {
+	case nvme_cmd_write:
+	case nvme_cmd_write_zeroes:
+	case nvme_cmd_write_uncor:
+		 return NVME_CMD_EFFECTS_LBCC;
+	default:
+		return 0;
+	}
+}
+
 u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns, u8 opcode)
 {
 	u32 effects = 0;
@@ -1081,16 +1093,24 @@ u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns, u8 opcode)
 	if (ns) {
 		if (ns->head->effects)
 			effects = le32_to_cpu(ns->head->effects->iocs[opcode]);
+		if (ns->head->ids.csi == NVME_CAP_CSS_NVM)
+			effects |= nvme_known_nvm_effects(opcode);
 		if (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC))
 			dev_warn_once(ctrl->device,
-				"IO command:%02x has unhandled effects:%08x\n",
+				"IO command:%02x has unusual effects:%08x\n",
 				opcode, effects);
-		return 0;
-	}
 
-	if (ctrl->effects)
-		effects = le32_to_cpu(ctrl->effects->acs[opcode]);
-	effects |= nvme_known_admin_effects(opcode);
+		/*
+		 * NVME_CMD_EFFECTS_CSE_MASK causes a freeze all I/O queues,
+		 * which would deadlock when done on an I/O command.  Note that
+		 * We already warn about an unusual effect above.
+		 */
+		effects &= ~NVME_CMD_EFFECTS_CSE_MASK;
+	} else {
+		if (ctrl->effects)
+			effects = le32_to_cpu(ctrl->effects->acs[opcode]);
+		effects |= nvme_known_admin_effects(opcode);
+	}
 
 	return effects;
 }
Signature · 1 line
2.35.1
maintainer
#10 lore raw

Re: [PATCH 5/6] nvme: also return I/O command effects from nvme_command_effects

Quoted 48 lines · Christoph Hellwig

To be able to use the Commands Supported and Effects Log for allowing unprivileged passtrough, it needs to be corretly reported for I/O commands as well. Return the I/O command effects from nvme_command_effects, and also add a default list of effects for the NVM command set. For other command sets, the Commands Supported and Effects log is required to be present already.

---
  drivers/nvme/host/core.c | 32 ++++++++++++++++++++++++++------
  1 file changed, 26 insertions(+), 6 deletions(-)
drivers/nvme/host/core.c +15 -2
index e26b085a007aea..21d79c186d8c14 100644
@@ -1074,6 +1074,18 @@ static u32 nvme_known_admin_effects(u8 opcode)
  	return 0;
  }
 
+static u32 nvme_known_nvm_effects(u8 opcode)
+{
+	switch (opcode) {
+	case nvme_cmd_write:
+	case nvme_cmd_write_zeroes:
+	case nvme_cmd_write_uncor:
+		 return NVME_CMD_EFFECTS_LBCC;
+	default:
+		return 0;
+	}
+}
+
  u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns, u8 opcode)
  {
  	u32 effects = 0;
@@ -1081,16 +1093,24 @@ u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns, u8 opcode)
  	if (ns) {
  		if (ns->head->effects)
  			effects = le32_to_cpu(ns->head->effects->iocs[opcode]);
+		if (ns->head->ids.csi == NVME_CAP_CSS_NVM)
+			effects |= nvme_known_nvm_effects(opcode);
  		if (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC))
  			dev_warn_once(ctrl->device,
-				"IO command:%02x has unhandled effects:%08x\n",
+				"IO command:%02x has unusual effects:%08x\n",
  				opcode, effects);
-		return 0;

drivers/nvme/host/core.c u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns, u8 opcode) · line 1107

Quoted 10 lines
drivers/nvme/host/core.c +5 -4
-	}
 
-	if (ctrl->effects)
-		effects = le32_to_cpu(ctrl->effects->acs[opcode]);
-	effects |= nvme_known_admin_effects(opcode);
+		/*
+		 * NVME_CMD_EFFECTS_CSE_MASK causes a freeze all I/O queues,
+		 * which would deadlock when done on an I/O command.  Note that
+		 * We already warn about an unusual effect above.
+		 */

I think it would be helpful to warn that we are masking it out? The
warning above does not directly relate to the cse mask, but rather anthing outside of NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC ?

Quoted 9 lines
drivers/nvme/host/core.c +6 -0
+		effects &= ~NVME_CMD_EFFECTS_CSE_MASK;
+	} else {
+		if (ctrl->effects)
+			effects = le32_to_cpu(ctrl->effects->acs[opcode]);
+		effects |= nvme_known_admin_effects(opcode);
+	}
 
  	return effects;
  }
author maintainer
#11 lore raw

Re: [PATCH 5/6] nvme: also return I/O command effects from nvme_command_effects

Quoted 13 lines · Sagi Grimberg
Quoted 13 lines
drivers/nvme/host/core.c +4 -5
+		if (ns->head->ids.csi == NVME_CAP_CSS_NVM)
+			effects |= nvme_known_nvm_effects(opcode);
  		if (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC))
  			dev_warn_once(ctrl->device,
-				"IO command:%02x has unhandled effects:%08x\n",
+				"IO command:%02x has unusual effects:%08x\n",
  				opcode, effects);
-		return 0;
-	}
  -	if (ctrl->effects)
-		effects = le32_to_cpu(ctrl->effects->acs[opcode]);
-	effects |= nvme_known_admin_effects(opcode);
+		/*
Quoted 8 lines

drivers/nvme/host/core.c u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns, u8 opcode) · line 1107

Quoted 4 lines
drivers/nvme/host/core.c +4 -0
+		 * NVME_CMD_EFFECTS_CSE_MASK causes a freeze all I/O queues,
+		 * which would deadlock when done on an I/O command.  Note that
+		 * We already warn about an unusual effect above.
+		 */

I think it would be helpful to warn that we are masking it out? The warning above does not directly relate to the cse mask, but rather anthing outside of NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC ?

Well, all these effects are unusual for I/O commands, and all the effects really are hints to the host. But if you think we can do better, can you send an incremental fixup? We'll need to get these fixes in ASAP to fix the gapping security hole, or just revert the unprivileged passthrough for 6.2.

maintainer
#12 lore raw

Re: [PATCH 5/6] nvme: also return I/O command effects from nvme_command_effects

Quoted 23 lines
Quoted 14 lines
Quoted 14 lines
drivers/nvme/host/core.c +4 -5
+		if (ns->head->ids.csi == NVME_CAP_CSS_NVM)
+			effects |= nvme_known_nvm_effects(opcode);
   		if (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC))
   			dev_warn_once(ctrl->device,
-				"IO command:%02x has unhandled effects:%08x\n",
+				"IO command:%02x has unusual effects:%08x\n",
   				opcode, effects);
-		return 0;
-	}
   -	if (ctrl->effects)
-		effects = le32_to_cpu(ctrl->effects->acs[opcode]);
-	effects |= nvme_known_admin_effects(opcode);
+		/*
Quoted 8 lines

drivers/nvme/host/core.c u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns, u8 opcode) · line 1107

Quoted 4 lines
drivers/nvme/host/core.c +4 -0
+		 * NVME_CMD_EFFECTS_CSE_MASK causes a freeze all I/O queues,
+		 * which would deadlock when done on an I/O command.  Note that
+		 * We already warn about an unusual effect above.
+		 */

I think it would be helpful to warn that we are masking it out? The warning above does not directly relate to the cse mask, but rather anthing outside of NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC ?

Quoted 5 lines

Well, all these effects are unusual for I/O commands, and all the effects really are hints to the host. But if you think we can do better, can you send an incremental fixup? We'll need to get these fixes in ASAP to fix the gapping security hole, or just revert the unprivileged passthrough for 6.2.

That's fine, No need to hold this for 6.2

author maintainer
#13 lore raw

Re: [PATCH 5/6] nvme: also return I/O command effects from nvme_command_effects

Quoted 1 line · Sagi Grimberg

That's fine, No need to hold this for 6.2

Thanks. Keith, Kanchan - any comments on this version of the series?

#14 lore raw

Re: [PATCH 5/6] nvme: also return I/O command effects from nvme_command_effects

Quoted 4 lines · Christoph Hellwig
Quoted 1 line · Sagi Grimberg

That's fine, No need to hold this for 6.2

Thanks. Keith, Kanchan - any comments on this version of the series?

This continues to look good. I am all for having this in. Thanks for the fix.

author maintainer
#15 lore raw

PATCH 6/6 nvme: consult the CSE log page for unprivileged passthrough

In reply to Christoph Hellwig

Commands like Write Zeros can change the contents of a namespaces without actually transferring data. To protect against this, check the Commands Supported and Effects log is supported by the controller for any unprivileg command passthrough and refuse unprivileged passthrough if the command has any effects that can change data or metadata.

Note: While the Commands Support and Effects log page has only been mandatory since NVMe 2.0, it is widely supported because Windows requires it for any command passthrough from userspace.

Fixes e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN")
---
 drivers/nvme/host/ioctl.c | 28 ++++++++++++++++++++++++----
 include/linux/nvme.h      |  1 +
 2 files changed, 25 insertions(+), 4 deletions(-)
drivers/nvme/host/ioctl.c +24 -4
index 9ddda571f0461f..a8639919237e6a 100644
@@ -11,6 +11,8 @@
 static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c,
 		fmode_t mode)
 {
+	u32 effects;
+
 	if (capable(CAP_SYS_ADMIN))
 		return true;
 
@@ -43,11 +45,29 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c,
 	}
 
 	/*
-	 * Only allow I/O commands that transfer data to the controller if the
-	 * special file is open for writing, but always allow I/O commands that
-	 * transfer data from the controller.
+	 * Check if the controller provides a Commands Supported and Effects log
+	 * and marks this command as supported.  If not reject unprivileged
+	 * passthrough.
+	 */
+	effects = nvme_command_effects(ns->ctrl, ns, c->common.opcode);
+	if (!(effects & NVME_CMD_EFFECTS_CSUPP))
+		return false;
+
+	/*
+	 * Don't allow passthrough for command that have intrusive (or unknown)
+	 * effects.
+	 */
+	if (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC |
+			NVME_CMD_EFFECTS_UUID_SEL |
+			NVME_CMD_EFFECTS_SCOPE_MASK))
+		return false;
+
+	/*
+	 * Only allow I/O commands that transfer data to the controller or that
+	 * change the logical block contents if the file descriptor is open for
+	 * writing.
 	 */
-	if (nvme_is_write(c))
+	if (nvme_is_write(c) || (effects & NVME_CMD_EFFECTS_LBCC))
 		return mode & FMODE_WRITE;
 	return true;
 }
include/linux/nvme.h +1 -0
index d1cd53f2b6abd9..4fad4aa245fb06 100644
@@ -642,6 +642,7 @@ enum {
 	NVME_CMD_EFFECTS_CCC		= 1 << 4,
 	NVME_CMD_EFFECTS_CSE_MASK	= GENMASK(18, 16),
 	NVME_CMD_EFFECTS_UUID_SEL	= 1 << 19,
+	NVME_CMD_EFFECTS_SCOPE_MASK	= GENMASK(31, 20),
 };
 
 struct nvme_effects_log {
Signature · 1 line
2.35.1
author maintainer
#18 lore raw
Quoted 6 lines · Keith Busch

Series looks good to go.

Unless you're already on it, I'd be happy to take a shot at the improvements we discussed earlier for the next merge window.

I still have the current versions of those stashed away from the last iteration, but as they'd need a rebase anyway I'll happily leave that to you.