arm64: dts: qcom: sc8280xp-x13s: move 'regulator-vph-pwr' node

Move the new 'regulator-vph-pwr' node before the wlan regulator node to restore the root-node sort order (alphabetically by node name).

While at it, add a couple of newlines to separate the properties for consistency with the other regulator nodes.

Signed-off-by Johan Hovold <[email protected]>

---

 .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +10 -8

index aeb9e1800f71..0201c6776746 100644
@@ -95,6 +95,16 @@ vreg_nvme: regulator-nvme {
 		regulator-boot-on;
 	};
 
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: regulator-wlan {
 		compatible = "regulator-fixed";
 

@@ -127,14 +137,6 @@ vreg_wwan: regulator-wwan {
 		regulator-boot-on;
 	};
 
-	vreg_vph_pwr: regulator-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "VPH_VCC3R9";
-		regulator-min-microvolt = <3900000>;
-		regulator-max-microvolt = <3900000>;
-		regulator-always-on;
-	};
-
 	thermal-zones {
 		skin-temp-thermal {
 			polling-delay-passive = <250>;

Move the new 'regulator-vph-pwr' node before the wlan regulator node to restore the root-node sort order (alphabetically by node name).

While at it, add a couple of newlines to separate the properties for consistency with the other regulator nodes.

[...]