Skip to contentSkip to conversation

arm64: dts: qcom: sc8280xp-crd: allow vreg_l3b to be disabled

PATCH Applied Johan Hovold 3 participants 3 messages Jan 12, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: qcom: sc8280xp-crd: allow vreg_l3b to be disabled

The vreg_l3b supply is used by the eDP, UFS and USB1 PHYs which are now described by the devicetree so that the regulator no longer needs to be marked always-on.

---
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 1 -
 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +0 -1
index db12d8678861..e5e75cc2c670 100644
@@ -150,7 +150,6 @@ vreg_l3b: ldo3 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-boot-on;
-			regulator-always-on;
 		};
 
 		vreg_l4b: ldo4 {
Signature · 1 line
2.38.2
Reviewed-by on v1 1/1
#1 lore raw
Quoted 6 lines · Johan Hovold

The vreg_l3b supply is used by the eDP, UFS and USB1 PHYs which are now described by the devicetree so that the regulator no longer needs to be marked always-on.

---

Konrad

Quoted 15 lines
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 1 -
 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +0 -1
index db12d8678861..e5e75cc2c670 100644
@@ -150,7 +150,6 @@ vreg_l3b: ldo3 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-boot-on;
-			regulator-always-on;
 		};
 
 		vreg_l4b: ldo4 {
maintainer Applied
#2 lore raw
In reply to Johan Hovold
Quoted 5 lines · Johan Hovold

The vreg_l3b supply is used by the eDP, UFS and USB1 PHYs which are now described by the devicetree so that the regulator no longer needs to be marked always-on.

Applied, thanks!

[1/1] arm64: dts: qcom: sc8280xp-crd: allow vreg_l3b to be disabled

      commit: e15a815884925177f252a0adfe3b93dece6a75a8

Best regards,

Signature · 1 line
Bjorn Andersson <[email protected]>