Fix kvm_setup_gdt and reuse in vcpu_init_descriptor_tables
cover Fix kvm_setup_gdt and reuse in vcpu_init_descriptor_tables
Remove discrepancy between kvm_setup_gdt and vcpu_init_descriptor_tables by fixing initialization of limit in kvm_setup_gdt and reusing kvm_setup_gdt in vcpu_init_descriptor_tables.
Ackerley Tng (2):
KVM: selftests: Fix initialization of GDT limit
KVM: selftests: Reuse kvm_setup_gdt in vcpu_init_descriptor_tables
tools/testing/selftests/kvm/lib/x86_64/processor.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
--
2.39.0.314.g84b9a713c41-goog
PATCH 1/2 KVM: selftests: Fix initialization of GDT limit
Subtract 1 to initialize GDT limit according to spec.
--- tools/testing/selftests/kvm/lib/x86_64/processor.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
tools/testing/selftests/kvm/lib/x86_64/processor.c +6 -1
@@ -502,7 +502,12 @@ static void kvm_setup_gdt(struct kvm_vm *vm, struct kvm_dtable *dt) vm->gdt =__vm_vaddr_alloc_page (vm,MEM_REGION_DATA ); dt->base = vm->gdt; - dt->limit =getpagesize (); + +/* +* Intel SDM Volume 3, 3.5.1: "the GDT limit should always be one less +* than an integral multiple of eight" +*/ + dt->limit =getpagesize () -1 ; } static void kvm_setup_tss_64bit(struct kvm_vm *vm, struct kvm_segment *segp,
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Sean Christopherson
reviewerRe: [PATCH 1/2] KVM: selftests: Fix initialization of GDT limit
Quoted 1 line · Ackerley Tng
Subtract 1 to initialize GDT limit according to spec.
Nit, make changelogs standalone, i.e. don't make me read the code just to understand the changelog. "Subtract 1" is meaningless without seeing the existing code. The changelog doesn't need to be a play-by-play, e.g. describing the change as "inclusive vs. exclusive" is also fine, the important thing is that readers can gain a basic understanding of the change without needing to read code.
Quoted 10 lines
Signed-off-by Ackerley Tng <[email protected]>--- tools/testing/selftests/kvm/lib/x86_64/processor.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)tools/testing/selftests/kvm/lib/x86_64/processor.c +0
-0
tools/testing/selftests/kvm/lib/x86_64/processor.c static void kvm_setup_gdt(struct kvm_vm *vm, struct kvm_dtable *dt) · line 507
Quoted 7 lines
tools/testing/selftests/kvm/lib/x86_64/processor.c +3
-1@@ -502,7 +502,12 @@ static void kvm_setup_gdt(struct kvm_vm *vm, struct kvm_dtable *dt) vm->gdt =__vm_vaddr_alloc_page (vm,MEM_REGION_DATA ); dt->base = vm->gdt; - dt->limit =getpagesize (); + +/* +* Intel SDM Volume 3, 3.5.1:
As a general rule, especially in code comments, never reference manual sections by their index/numbers, there's a 99% chance the comment will be stale within a few years.
Quoting manuals is ok, because if the quote because stale then that in and of itself is an interesting datapoint. If referencing a specific section is the easiest way to convey something, then use then name of the section, as that's less likely to be arbitrarily change.
In this case, I'd just omit the comment entirely. We have to assume readers have a minimum level of knowledge, and IMO this is firmly below (above?) the threshold.
Quoted 10 lines
"the GDT limit should always be one less
tools/testing/selftests/kvm/lib/x86_64/processor.c +3
-0+* than an integral multiple of eight" +*/ + dt->limit =getpagesize () -1 ; } static void kvm_setup_tss_64bit(struct kvm_vm *vm, struct kvm_segment *segp,Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Sean Christopherson
reviewerRe: [PATCH 1/2] KVM: selftests: Fix initialization of GDT limit
Quoted 31 lines · Sean Christopherson
Quoted 1 line · Ackerley Tng
Subtract 1 to initialize GDT limit according to spec.
Nit, make changelogs standalone, i.e. don't make me read the code just to understand the changelog. "Subtract 1" is meaningless without seeing the existing code. The changelog doesn't need to be a play-by-play, e.g. describing the change as "inclusive vs. exclusive" is also fine, the important thing is that readers can gain a basic understanding of the change without needing to read code.
Quoted 10 lines
Signed-off-by Ackerley Tng <[email protected]>--- tools/testing/selftests/kvm/lib/x86_64/processor.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)tools/testing/selftests/kvm/lib/x86_64/processor.c +0
-0tools/testing/selftests/kvm/lib/x86_64/processor.c static void kvm_setup_gdt(struct kvm_vm *vm, struct kvm_dtable *dt) · line 507
Quoted 7 lines
tools/testing/selftests/kvm/lib/x86_64/processor.c +3
-1@@ -502,7 +502,12 @@ static void kvm_setup_gdt(struct kvm_vm *vm, struct kvm_dtable *dt) vm->gdt =__vm_vaddr_alloc_page (vm,MEM_REGION_DATA ); dt->base = vm->gdt; - dt->limit =getpagesize (); + +/* +* Intel SDM Volume 3, 3.5.1: As a general rule, especially in code comments, never reference manual sections by their index/numbers, there's a 99% chance the comment will be stale within a few years.
Quoted 7 lines
Quoting manuals is ok, because if the quote because stale then that in and of itself is an interesting datapoint. If referencing a specific section is the easiest way to convey something, then use then name of the section, as that's less likely to be arbitrarily change.
In this case, I'd just omit the comment entirely. We have to assume readers have a minimum level of knowledge, and IMO this is firmly below (above?) the threshold.
No need to post a v2, I'll fold this patch into a larger cleanup of the descriptor table code.
Thanks!
PATCH 2/2 KVM: selftests: Reuse kvm_setup_gdt in vcpu_init_descriptor_tables
In reply to Ackerley TngRefactor vcpu_init_descriptor_tables to use kvm_setup_gdt
--- tools/testing/selftests/kvm/lib/x86_64/processor.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
tools/testing/selftests/kvm/lib/x86_64/processor.c +1 -2
@@ -1119,8 +1119,7 @@ void vcpu_init_descriptor_tables(struct kvm_vcpu *vcpu)vcpu_sregs_get (vcpu, &sregs); sregs.idt.base = vm->idt; sregs.idt.limit =NUM_INTERRUPTS *sizeof (struct idt_entry ) -1 ; - sregs.gdt.base = vm->gdt; - sregs.gdt.limit =getpagesize () -1 ; +kvm_setup_gdt (vcpu->vm, &sregs.gdt);kvm_seg_set_kernel_data_64bit (NULL ,DEFAULT_DATA_SELECTOR , &sregs.gs);vcpu_sregs_set (vcpu, &sregs); *(vm_vaddr_t *)addr_gva2hva (vm, (vm_vaddr_t)(&exception_handlers)) = vm->handlers;
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Sean Christopherson
reviewerRe: [PATCH 2/2] KVM: selftests: Reuse kvm_setup_gdt in vcpu_init_descriptor_tables
Quoted 12 lines · Ackerley Tng
Refactor
vcpu_init_descriptor_tablesto usekvm_setup_gdtSigned-off-by Ackerley Tng <[email protected]>--- tools/testing/selftests/kvm/lib/x86_64/processor.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)tools/testing/selftests/kvm/lib/x86_64/processor.c +0
-0
tools/testing/selftests/kvm/lib/x86_64/processor.c void vcpu_init_descriptor_tables(struct kvm_vcpu *vcpu) · line 1122
Quoted 6 lines
tools/testing/selftests/kvm/lib/x86_64/processor.c +1
-2@@ -1119,8 +1119,7 @@ void vcpu_init_descriptor_tables(struct kvm_vcpu *vcpu)vcpu_sregs_get (vcpu, &sregs); sregs.idt.base = vm->idt; sregs.idt.limit =NUM_INTERRUPTS *sizeof (struct idt_entry ) -1 ; - sregs.gdt.base = vm->gdt; - sregs.gdt.limit =getpagesize () -1 ; +kvm_setup_gdt (vcpu->vm, &sregs.gdt);
*sigh*
The selftests infrastructure is so misguided. Forcing tests to opt-in to installing an IDT just to avoid allocating two pages is such an awful tradeoff.
Now that we have kvm_arch_vm_post_create(), I think we should always allocate the GDT, IDT, and handlers, and then vCPU setup/creation can simply grab the already-allocated values and stuff them into KVM. That would then eliminate kvm_setup_gdt() entirely.
And much of the setup code is also backwards and unnecessarily thread-unsafe, e.g. vCPU initialization shouldn't need to fill GDT entries.
So, while I agree that using kvm_setup_gdt() is a good change on its own, I'd rather go the more aggressive route and clean up the underlying mess.
I'll send patches sometime this week, unfortunately typing up what I have in mind is harder than just reworking the code :-/
Re: [PATCH 2/2] KVM: selftests: Reuse kvm_setup_gdt in vcpu_init_descriptor_tables
Quoted 23 lines · Sean Christopherson
Quoted 12 lines · Ackerley Tng
Refactor
vcpu_init_descriptor_tablesto usekvm_setup_gdtSigned-off-by Ackerley Tng <[email protected]>--- tools/testing/selftests/kvm/lib/x86_64/processor.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)tools/testing/selftests/kvm/lib/x86_64/processor.c +0
-0tools/testing/selftests/kvm/lib/x86_64/processor.c void vcpu_init_descriptor_tables(struct kvm_vcpu *vcpu) · line 1122
Quoted 6 lines
tools/testing/selftests/kvm/lib/x86_64/processor.c +1
-2@@ -1119,8 +1119,7 @@ void vcpu_init_descriptor_tables(struct kvm_vcpu *vcpu)vcpu_sregs_get (vcpu, &sregs); sregs.idt.base = vm->idt; sregs.idt.limit =NUM_INTERRUPTS *sizeof (struct idt_entry ) -1 ; - sregs.gdt.base = vm->gdt; - sregs.gdt.limit =getpagesize () -1 ; +kvm_setup_gdt (vcpu->vm, &sregs.gdt);*sigh*
Quoted 7 lines
The selftests infrastructure is so misguided. Forcing tests to opt-in to installing an IDT just to avoid allocating two pages is such an awful tradeoff.
Now that we have
kvm_arch_vm_post_create(), I think we should always allocate the GDT, IDT, and handlers, and then vCPU setup/creation can simply grab the already-allocated values and stuff them into KVM. That would then eliminatekvm_setup_gdt()entirely.
+1
I actually started going through the process of making the same clean up last year, but never got around to posting it. My motivation at the time was to provide better debuggability for test failures that were due to unexpected exceptions in guest mode.
One thing to be aware of: vmx_pmu_caps_test and platform_info_test both relied on *not* having an IDT installed (as of Sep 2022). Specifically they relied on exception generating KVM_EXIT_SHUTDOWN. Installing an IDT causes these tests instead to hit the unhandled exception TEST_ASSERT(). Just a heads up when you do this clean up :)
Quoted 9 lines
And much of the setup code is also backwards and unnecessarily thread-unsafe, e.g. vCPU initialization shouldn't need to fill GDT entries.
So, while I agree that using
kvm_setup_gdt()is a good change on its own, I'd rather go the more aggressive route and clean up the underlying mess.I'll send patches sometime this week, unfortunately typing up what I have in mind is harder than just reworking the code :-/
I would offer to post my patches but it doesn't cover any of the GDT stuff so I'll let you post yours.
Sean Christopherson
reviewerRe: [PATCH 2/2] KVM: selftests: Reuse kvm_setup_gdt in vcpu_init_descriptor_tables
Quoted 5 lines · David Matlack
One thing to be aware of:
vmx_pmu_caps_testandplatform_info_testboth relied on *not* having an IDT installed (as of Sep 2022). Specifically they relied on exception generatingKVM_EXIT_SHUTDOWN. Installing an IDT causes these tests instead to hit the unhandled exceptionTEST_ASSERT().
LOL, I'm just _shocked_ that we would have such code.
Quoted 1 line
Just a heads up when you do this clean up :)
Thanks, definitely saved me some time!