Skip to contentSkip to conversation

package/systemd: bump to version 252.4

PATCH Applied Norbert Lange 2 participants 11 messages Jan 15, 2023 – Feb 7, 2023 Licenses and spdx stuff

lore
Share & tools
lore
#0 lore raw

PATCH v8 1/4 package/systemd: bump to version 252.4

Following files changed *license* from CC0-1.0 to MIT-0:

-   src/systemctl/systemd-sysv-install.SKELETON
-   config files
-   examples under /network

The file LICENSES/MIT-0.txt has been added for this reason, hashes added, corrected for LICENSES/README.md.

Kernel version 3.15 is now the bare minimum, but only version 4.15 and higher are fully supported and tested:

-   bump kernel header dependencies
-   correct kconfig description
-   improvements to make the kconfig description better reflect

the information from the README

Remove upstreamed patch.

Set new options to their default, remove -Defi-cc option.

Set -Ddbus=false to ensure dbus dependency is runtime only.

Set -Ddbus-interfaces-dir=no as interface XML file generation is not supported when cross compiling.

Set -Ddefault-user-shell=/bin/sh to the always available shell.

---
v7->v8:

* update to 252.4

v6->v7:

*   update to 252.1
*   compare changes in licenses to 250.4
*   update systemd description in kconfig with required and recommended

kernel
* split patch

v5->v6:

* update to 251.4

v4->v5:

* fix dnssec changes, use James' solution

v2->v4:

*   Bump kernel header dependency to 3.15
*   Inherit changes from James' version bump patch (following)
*   (Force) disable compile time dbus dependencies
*   set default-dnssec to allow-downgrade

v1->v2:

*   note about changed LICENSES/README.md
*   always set default-user-shell to /bin/sh
*   always set default-locale to C-UTF-8
*   fix typos in commit message

---

License diff for illustration

LICENSES/README.md +3 -1
@@ -45,9 +45,11 @@
  * the following sources are licensed under the **CC0-1.0** license:
    - src/basic/siphash24.c
    - src/basic/siphash24.h
-   - src/systemctl/systemd-sysv-install.SKELETON
    - tools/check-includes.pl
+  * the following sources are licensed under the **MIT-0** license:
    - all examples under man/
+   - src/systemctl/systemd-sysv-install.SKELETON
+   - config files and examples under /network
  * the following sources are under **Public Domain** (LicenseRef-murmurhash2-public-domain):
    - src/basic/MurmurHash2.c
    - src/basic/MurmurHash2.h

package/systemd: 252.4

---
 package/systemd/Config.in    | 12 +++++++++---
 package/systemd/systemd.hash |  5 +++--
 package/systemd/systemd.mk   | 16 ++++++++++++++--
 system/Config.in             |  6 +++---
 4 files changed, 29 insertions(+), 10 deletions(-)
package/systemd/Config.in +9 -3
index 45a9e2d644..f35305c0be 100644
@@ -22,7 +22,7 @@ menuconfig BR2_PACKAGE_SYSTEMD
 	depends on !BR2_STATIC_LIBS # kmod
 	depends on BR2_TOOLCHAIN_USES_GLIBC
 	depends on BR2_TOOLCHAIN_HAS_SSP
-	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
+	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
 	depends on BR2_HOST_GCC_AT_LEAST_5 # host-systemd
 	select BR2_PACKAGE_HAS_UDEV
@@ -51,7 +51,11 @@ menuconfig BR2_PACKAGE_SYSTEMD
 	  an elaborate transactional dependency-based service control
 	  logic.  It can work as a drop-in replacement for sysvinit.
 
-	  Systemd requires a Linux kernel >= 3.13 with the following
+	  Kernel versions below 4.15 ("recommended baseline") have
+	  significant gaps in functionality and are not recommended
+	  for use with this version of systemd.
+
+	  Systemd requires a Linux kernel >= 3.15 with the following
 	  options enabled:
 
 	  - CONFIG_DEVTMPFS
@@ -66,9 +70,11 @@ menuconfig BR2_PACKAGE_SYSTEMD
 	  - CONFIG_PROC_FS
 	  - CONFIG_FHANDLE (libudev, mount and bind mount handling)
 
-	  - CONFIG_NET_NS (needed by PrivateNetwork=, used in some
+	  - CONFIG_NET_NS (Required for PrivateNetwork=, used in some
 	    systemd units)
 
+	  - CONFIG_USER_NS (Required for PrivateUsers=)
+
 	  - CONFIG_AUTOFS_FS / CONFIG_AUTOFS4_FS
 	  - CONFIG_TMPFS_POSIX_ACL
 	  - CONFIG_TMPFS_XATTR
package/systemd/systemd.hash +3 -2
index 3b98566f32..00c08edcd9 100644
@@ -1,5 +1,5 @@
 # sha256 locally computed
-sha256  638a2fc78828765fc97bc73f428205b6dc1d359149b6c6bfe4d2a649cba2cca8  systemd-250.8.tar.gz
+sha256  cf2d27e67663d599a045101c7178cf0ec63d9df2962a54adf7de0d0357724f00  systemd-252.4.tar.gz
 sha256  ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6  LICENSE.GPL2
 sha256  dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551  LICENSE.LGPL2.1
 sha256  e5a8645ad94aab24e312dd0c6be2aa54236eb9374480b1b14ea5c61598874fd5  LICENSES/BSD-2-Clause.txt
@@ -8,7 +8,8 @@ sha256  a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499  LICENS
 sha256  61778e80a2fd85955b626b29aa2bcf06144c714277bded65633e4a81479d9fb3  LICENSES/LGPL-2.0-or-later.txt
 sha256  5bcef4fedbfc08776630e65d5d0d074dd31208037eddb167ca46a9ec4f737764  LICENSES/Linux-syscall-note.txt
 sha256  790ac93fb2859097bdda4cf08b5a4feb5e479d0cb2c74f403248241bc3e7c216  LICENSES/lookup3-public-domain.txt
+sha256  8a6fc0879cecc0b96bf4c08159b9d733bf0f15fcf32879aec98c4ffd05424554  LICENSES/MIT-0.txt
 sha256  b85dcd3e453d05982552c52b5fc9e0bdd6d23c6f8e844b984a88af32570b0cc0  LICENSES/MIT.txt
 sha256  2a98749f6bec00dfaed86fa9c1edea871aaae4f11ee4d100b671aaf4ce353a73  LICENSES/murmurhash2-public-domain.txt
 sha256  1a7adaa2c86cedfd6c7f5c0c7c72fd6d3e02cd0c9593f21fdb53c89bb2b130ec  LICENSES/OFL-1.1.txt
-sha256  11801e931f252252a16eac8299465510d0a82c36bfd9ac8aea9b202b76d2f82b  LICENSES/README.md
+sha256  da9b2c7b8cd10516fd2c4279b82496ea61787148f13e899c62fc8988c5fac34f  LICENSES/README.md
package/systemd/systemd.mk +14 -2
index b96873b73f..b0597f9bb4 100644
@@ -19,7 +19,7 @@
 # - Diff sysusers.d with the previous version
 # - Diff factory/etc/nsswitch.conf with the previous version
 #   (details are often sprinkled around in README and manpages)
-SYSTEMD_VERSION = 250.8
+SYSTEMD_VERSION = 252.4
 SYSTEMD_SITE = $(call github,systemd,systemd-stable,v$(SYSTEMD_VERSION))
 SYSTEMD_LICENSE = \
 	LGPL-2.1+, \
@@ -29,6 +29,7 @@ SYSTEMD_LICENSE = \
 	BSD-3-Clause (tools/chromiumos), \
 	CC0-1.0 (few source files, see LICENSES/README.md), \
 	GPL-2.0 with Linux-syscall-note (linux kernel headers), \
+	MIT-0 (few source files, see LICENSES/README.md), \
 	MIT (few source files, see LICENSES/README.md), \
 	OFL-1.1 (Heebo fonts)
 SYSTEMD_LICENSE_FILES = \
@@ -40,6 +41,7 @@ SYSTEMD_LICENSE_FILES = \
 	LICENSES/LGPL-2.0-or-later.txt \
 	LICENSES/Linux-syscall-note.txt \
 	LICENSES/lookup3-public-domain.txt \
+	LICENSES/MIT-0.txt \
 	LICENSES/MIT.txt \
 	LICENSES/murmurhash2-public-domain.txt \
 	LICENSES/OFL-1.1.txt \
@@ -61,7 +63,13 @@ SYSTEMD_SELINUX_MODULES = systemd udev xdg
 SYSTEMD_PROVIDES = udev
 
 SYSTEMD_CONF_OPTS += \
+	-Ddbus=false \
+	-Ddbus-interfaces-dir=no \
+	-Ddefault-compression='auto' \
 	-Ddefault-hierarchy=unified \
+	-Ddefault-locale='C.UTF-8' \
+	-Ddefault-user-shell=/bin/sh \
+	-Dfirst-boot-full-preset=false \
 	-Didn=true \
 	-Dima=false \
 	-Dkexec-path=/usr/sbin/kexec \
@@ -72,6 +80,7 @@ SYSTEMD_CONF_OPTS += \
 	-Dman=false \
 	-Dmount-path=/usr/bin/mount \
 	-Dmode=release \
+	-Dnspawn-locale='C.UTF-8' \
 	-Dnss-systemd=true \
 	-Dquotacheck-path=/usr/sbin/quotacheck \
 	-Dquotaon-path=/usr/sbin/quotaon \
@@ -82,6 +91,7 @@ SYSTEMD_CONF_OPTS += \
 	-Dsulogin-path=/usr/sbin/sulogin \
 	-Dsystem-gid-max=999 \
 	-Dsystem-uid-max=999 \
+	-Dsysupdate=false \
 	-Dsysvinit-path= \
 	-Dsysvrcnd-path= \
 	-Dtelinit-path= \
@@ -553,7 +563,6 @@ SYSTEMD_DEPENDENCIES += gnu-efi
 SYSTEMD_CONF_OPTS += \
 	-Defi=true \
 	-Dgnu-efi=true \
-	-Defi-cc=$(TARGET_CC) \
 	-Defi-ld=bfd \
 	-Defi-libdir=$(STAGING_DIR)/usr/lib \
 	-Defi-includedir=$(STAGING_DIR)/usr/include/efi
@@ -793,6 +802,8 @@ HOST_SYSTEMD_CONF_OPTS = \
 	-Dbinfmt=false \
 	-Drepart=false \
 	-Dcoredump=false \
+	-Ddbus=false \
+	-Ddbus-interfaces-dir=no \
 	-Dpstore=false \
 	-Doomd=false \
 	-Dlogind=false \
@@ -801,6 +812,7 @@ HOST_SYSTEMD_CONF_OPTS = \
 	-Dmachined=false \
 	-Dportabled=false \
 	-Dsysext=false \
+	-Dsysupdate=false \
 	-Duserdb=false \
 	-Dhomed=false \
 	-Dnetworkd=false \
system/Config.in +3 -3
index 806a747315..232bdfe763 100644
@@ -125,19 +125,19 @@ config BR2_INIT_SYSTEMD
 	depends on BR2_TOOLCHAIN_USES_GLIBC
 	depends on BR2_TOOLCHAIN_HAS_SSP
 	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
+	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
 	depends on BR2_HOST_GCC_AT_LEAST_5
 	select BR2_ROOTFS_MERGED_USR
 	select BR2_PACKAGE_SYSTEMD
 	select BR2_PACKAGE_SKELETON_INIT_SYSTEMD if BR2_ROOTFS_SKELETON_DEFAULT
 
-comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.10, host and target gcc >= 5"
+comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.15, host and target gcc >= 5"
 	depends on BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS
 	depends on BR2_USE_MMU
 	depends on !BR2_TOOLCHAIN_USES_GLIBC || \
 		!BR2_TOOLCHAIN_HAS_SSP || \
-		!BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || \
+		!BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15 || \
 		!BR2_TOOLCHAIN_GCC_AT_LEAST_5 || \
 		!BR2_HOST_GCC_AT_LEAST_5
 
Signature · 6 lines
2.39.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw

PATCH v8 2/4 package/systemd: Add config option for sysupdate feature

Support the new feature added with v251,
requires openssl.

---
 package/systemd/Config.in  | 12 ++++++++++++
 package/systemd/systemd.mk |  7 ++++++-
 2 files changed, 18 insertions(+), 1 deletion(-)
package/systemd/Config.in +12 -0
index f35305c0be..9278772951 100644
@@ -481,6 +481,18 @@ config BR2_PACKAGE_SYSTEMD_SYSEXT
 
 	  https://www.freedesktop.org/software/systemd/man/systemd-sysext.html
 
+config BR2_PACKAGE_SYSTEMD_SYSUPDATE
+	bool "enable sysupdate support"
+	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL
+	select BR2_PACKAGE_UTIL_LINUX_LIBFDISK
+	help
+	  systemd-sysupdate atomically updates the host OS, container
+	  images, portable service images or other sources, based on
+	  the transfer configuration files described in sysupdate.d.
+
+	  https://www.freedesktop.org/software/systemd/man/systemd-sysupdate.html
+
 config BR2_PACKAGE_SYSTEMD_SYSUSERS
 	bool "enable sysusers support"
 	help
package/systemd/systemd.mk +6 -1
index b0597f9bb4..f49d34d32f 100644
@@ -91,7 +91,6 @@ SYSTEMD_CONF_OPTS += \
 	-Dsulogin-path=/usr/sbin/sulogin \
 	-Dsystem-gid-max=999 \
 	-Dsystem-uid-max=999 \
-	-Dsysupdate=false \
 	-Dsysvinit-path= \
 	-Dsysvrcnd-path= \
 	-Dtelinit-path= \
@@ -489,6 +488,12 @@ else
 SYSTEMD_CONF_OPTS += -Dsysext=false
 endif
 
+ifeq ($(BR2_PACKAGE_SYSTEMD_SYSUPDATE),y)
+SYSTEMD_CONF_OPTS += -Dsysupdate=true
+else
+SYSTEMD_CONF_OPTS += -Dsysupdate=false
+endif
+
 ifeq ($(BR2_PACKAGE_SYSTEMD_NETWORKD),y)
 SYSTEMD_CONF_OPTS += -Dnetworkd=true
 SYSTEMD_NETWORKD_USER = systemd-network -1 systemd-network -1 * - - - systemd Network Management
Signature · 6 lines
2.39.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#2 lore raw

Re: [Buildroot] [PATCH v8 2/4] package/systemd: Add config option for sysupdate feature

Quoted 15 lines · Norbert Lange

Support the new feature added with v251,
requires openssl.

---
  package/systemd/Config.in  | 12 ++++++++++++
  package/systemd/systemd.mk |  7 ++++++-
  2 files changed, 18 insertions(+), 1 deletion(-)
package/systemd/Config.in +0 -0
index f35305c0be..9278772951 100644

package/systemd/Config.in config BR2_PACKAGE_SYSTEMD_SYSEXT · line 488

Quoted 8 lines
package/systemd/Config.in +5 -0
@@ -481,6 +481,18 @@ config BR2_PACKAGE_SYSTEMD_SYSEXT
 
  	  https://www.freedesktop.org/software/systemd/man/systemd-sysext.html
 
+config BR2_PACKAGE_SYSTEMD_SYSUPDATE
+	bool "enable sysupdate support"
+	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL
+	select BR2_PACKAGE_UTIL_LINUX_LIBFDISK

AFAIU, sysupdate uses its own particular way of doing A/B updates (by updating
the GPT partition table) which is only supported by systemd-boot. Although I suppose it's possible to write a U-Boot script that does the same thing... So I added a note here to that effect. I don't suppose you actually used this option?

Applied to master, thanks.

Regards,
Arnout

Quoted 25 lines
package/systemd/Config.in +7 -0
+	help
+	  systemd-sysupdate atomically updates the host OS, container
+	  images, portable service images or other sources, based on
+	  the transfer configuration files described in sysupdate.d.
+
+	  https://www.freedesktop.org/software/systemd/man/systemd-sysupdate.html
+
  config BR2_PACKAGE_SYSTEMD_SYSUSERS
  	bool "enable sysusers support"
  	help
package/systemd/systemd.mk +0 -1
index b0597f9bb4..f49d34d32f 100644
@@ -91,7 +91,6 @@ SYSTEMD_CONF_OPTS += \
  	-Dsulogin-path=/usr/sbin/sulogin \
  	-Dsystem-gid-max=999 \
  	-Dsystem-uid-max=999 \
-	-Dsysupdate=false \
  	-Dsysvinit-path= \
  	-Dsysvrcnd-path= \
  	-Dtelinit-path= \
@@ -489,6 +488,12 @@ else
  SYSTEMD_CONF_OPTS += -Dsysext=false
  endif

package/systemd/systemd.mk else · line 499

Quoted 10 lines
package/systemd/systemd.mk +6 -0
 
+ifeq ($(BR2_PACKAGE_SYSTEMD_SYSUPDATE),y)
+SYSTEMD_CONF_OPTS += -Dsysupdate=true
+else
+SYSTEMD_CONF_OPTS += -Dsysupdate=false
+endif
+
  ifeq ($(BR2_PACKAGE_SYSTEMD_NETWORKD),y)
  SYSTEMD_CONF_OPTS += -Dnetworkd=true
  SYSTEMD_NETWORKD_USER = systemd-network -1 systemd-network -1 * - - - systemd Network Management

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#3 lore raw

Re: [Buildroot] [PATCH v8 2/4] package/systemd: Add config option for sysupdate feature

Am Di., 7. Feb. 2023 um 18:16 Uhr schrieb Arnout Vandecappelle <[email protected]>:

Quoted 22 lines · Norbert Lange
Quoted 18 lines

Support the new feature added with v251,
requires openssl.

---
  package/systemd/Config.in  | 12 ++++++++++++
  package/systemd/systemd.mk |  7 ++++++-
  2 files changed, 18 insertions(+), 1 deletion(-)
package/systemd/Config.in +0 -0
index f35305c0be..9278772951 100644
@@ -481,6 +481,18 @@ config BR2_PACKAGE_SYSTEMD_SYSEXT
 
        https://www.freedesktop.org/software/systemd/man/systemd-sysext.html
 
Quoted 10 lines

package/systemd/Config.in config BR2_PACKAGE_SYSTEMD_SYSEXT · line 488

Quoted 5 lines
package/systemd/Config.in +5 -0
+config BR2_PACKAGE_SYSTEMD_SYSUPDATE
+     bool "enable sysupdate support"
+     select BR2_PACKAGE_OPENSSL
+     select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL
+     select BR2_PACKAGE_UTIL_LINUX_LIBFDISK

AFAIU, sysupdate uses its own particular way of doing A/B updates (by updating
the GPT partition table) which is only supported by systemd-boot. Although I suppose it's possible to write a U-Boot script that does the same thing... So I added a note here to that effect. I don't suppose you actually used this option?

I dont think thats the case, there is only some way of measuring successfull boots,
sysupdate is just a part of the puzzle, you will have to do some additional work for sure.

No, I havent used it.

Quoted 6 lines

Applied to master, thanks.

Regards,
Arnout

Regards, Norbert

Quoted 28 lines
Quoted 28 lines
package/systemd/Config.in +7 -0
+     help
+       systemd-sysupdate atomically updates the host OS, container
+       images, portable service images or other sources, based on
+       the transfer configuration files described in sysupdate.d.
+
+       https://www.freedesktop.org/software/systemd/man/systemd-sysupdate.html
+
  config BR2_PACKAGE_SYSTEMD_SYSUSERS
      bool "enable sysusers support"
      help
package/systemd/systemd.mk +0 -1
index b0597f9bb4..f49d34d32f 100644
@@ -91,7 +91,6 @@ SYSTEMD_CONF_OPTS += \
      -Dsulogin-path=/usr/sbin/sulogin \
      -Dsystem-gid-max=999 \
      -Dsystem-uid-max=999 \
-     -Dsysupdate=false \
      -Dsysvinit-path= \
      -Dsysvrcnd-path= \
      -Dtelinit-path= \
@@ -489,6 +488,12 @@ else
  SYSTEMD_CONF_OPTS += -Dsysext=false
  endif
 
Quoted 9 lines

package/systemd/systemd.mk else · line 499

Quoted 9 lines
package/systemd/systemd.mk +6 -0
+ifeq ($(BR2_PACKAGE_SYSTEMD_SYSUPDATE),y)
+SYSTEMD_CONF_OPTS += -Dsysupdate=true
+else
+SYSTEMD_CONF_OPTS += -Dsysupdate=false
+endif
+
  ifeq ($(BR2_PACKAGE_SYSTEMD_NETWORKD),y)
  SYSTEMD_CONF_OPTS += -Dnetworkd=true
  SYSTEMD_NETWORKD_USER = systemd-network -1 systemd-network -1 * - - - systemd Network Management

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#4 lore raw

PATCH v8 3/4 package/systemd: support dnssec if openssl is available

In reply to Norbert Lange

Set -Ddefault-dnssec=allow-downgrade if openssl is available as both openssl and gcrypt are now supported for dnssec.

---
v6->v7:

* split off as its own patch
* seems that the change was done at v250 or earlier

---
 package/systemd/systemd.mk | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
package/systemd/systemd.mk +8 -2
index f49d34d32f..297cc400ee 100644
@@ -246,9 +246,9 @@ endif
 
 ifeq ($(BR2_PACKAGE_LIBGCRYPT),y)
 SYSTEMD_DEPENDENCIES += libgcrypt
-SYSTEMD_CONF_OPTS += -Ddefault-dnssec=allow-downgrade -Dgcrypt=true
+SYSTEMD_CONF_OPTS += -Dgcrypt=true
 else
-SYSTEMD_CONF_OPTS += -Ddefault-dnssec=no -Dgcrypt=false
+SYSTEMD_CONF_OPTS += -Dgcrypt=false
 endif
 
 ifeq ($(BR2_PACKAGE_P11_KIT),y)
@@ -318,6 +318,12 @@ else
 SYSTEMD_CONF_OPTS += -Dselinux=false
 endif
 
+ifneq ($(BR2_PACKAGE_LIBGCRYPT)$(BR2_PACKAGE_LIBOPENSSL),)
+SYSTEMD_CONF_OPTS += -Ddefault-dnssec=allow-downgrade
+else
+SYSTEMD_CONF_OPTS += -Ddefault-dnssec=no
+endif
+
 ifeq ($(BR2_PACKAGE_SYSTEMD_HWDB),y)
 SYSTEMD_CONF_OPTS += -Dhwdb=true
 define SYSTEMD_BUILD_HWDB
Signature · 6 lines
2.39.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#5 lore raw

Re: [Buildroot] [PATCH v8 3/4] package/systemd: support dnssec if openssl is available

Quoted 5 lines · Norbert Lange

Set -Ddefault-dnssec=allow-downgrade if openssl is available as both openssl and gcrypt are now supported for dnssec.

Applied to master, thanks. (Still not pushed - systemd runtime tests are
failing locally, I'm trying to see if this was already the case before the version bump.)

Regards,
Arnout

Quoted 29 lines

---
v6->v7:

* split off as its own patch
* seems that the change was done at v250 or earlier

---
  package/systemd/systemd.mk | 10 ++++++++--
  1 file changed, 8 insertions(+), 2 deletions(-)
package/systemd/systemd.mk +2 -2
index f49d34d32f..297cc400ee 100644
@@ -246,9 +246,9 @@ endif
 
  ifeq ($(BR2_PACKAGE_LIBGCRYPT),y)
  SYSTEMD_DEPENDENCIES += libgcrypt
-SYSTEMD_CONF_OPTS += -Ddefault-dnssec=allow-downgrade -Dgcrypt=true
+SYSTEMD_CONF_OPTS += -Dgcrypt=true
  else
-SYSTEMD_CONF_OPTS += -Ddefault-dnssec=no -Dgcrypt=false
+SYSTEMD_CONF_OPTS += -Dgcrypt=false
  endif
 
  ifeq ($(BR2_PACKAGE_P11_KIT),y)
@@ -318,6 +318,12 @@ else
  SYSTEMD_CONF_OPTS += -Dselinux=false
  endif

package/systemd/systemd.mk else · line 329

Quoted 10 lines
package/systemd/systemd.mk +6 -0
 
+ifneq ($(BR2_PACKAGE_LIBGCRYPT)$(BR2_PACKAGE_LIBOPENSSL),)
+SYSTEMD_CONF_OPTS += -Ddefault-dnssec=allow-downgrade
+else
+SYSTEMD_CONF_OPTS += -Ddefault-dnssec=no
+endif
+
  ifeq ($(BR2_PACKAGE_SYSTEMD_HWDB),y)
  SYSTEMD_CONF_OPTS += -Dhwdb=true
  define SYSTEMD_BUILD_HWDB

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#6 lore raw

PATCH v8 4/4 system: Warn if systemd is used with kernel < 4.15

In reply to Norbert Lange

To quote the README:

Quoted 4 lines

Kernel versions below 4.15 have significant gaps in functionality and are not recommended for use with this version of systemd. Taint flag 'old-kernel' will be set. Systemd will most likely still function, but upstream support and testing are limited.

---
 system/Config.in | 9 +++++++++
 1 file changed, 9 insertions(+)
system/Config.in +9 -0
index 232bdfe763..70ddf8df3c 100644
@@ -141,6 +141,15 @@ comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.15, host and targe
 		!BR2_TOOLCHAIN_GCC_AT_LEAST_5 || \
 		!BR2_HOST_GCC_AT_LEAST_5
 
+comment "systemd highly recommends headers >= 4.15"
+	depends on BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS
+	depends on BR2_USE_MMU
+	depends on BR2_TOOLCHAIN_USES_GLIBC
+	depends on BR2_TOOLCHAIN_HAS_SSP
+	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
+	depends on BR2_HOST_GCC_AT_LEAST_5
+	depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15
+
 config BR2_INIT_NONE
 	bool "None"
 	select BR2_PACKAGE_SKELETON_INIT_NONE if BR2_ROOTFS_SKELETON_DEFAULT
Signature · 6 lines
2.39.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#7 lore raw

Re: [Buildroot] [PATCH v8 4/4] system: Warn if systemd is used with kernel < 4.15

Quoted 9 lines · Norbert Lange

To quote the README:

Quoted 4 lines

Kernel versions below 4.15 have significant gaps in functionality and are not recommended for use with this version of systemd. Taint flag 'old-kernel' will be set. Systemd will most likely still function, but upstream support and testing are limited.

Finally applied to master and pushed.

Regards,
Arnout

Quoted 14 lines
---
  system/Config.in | 9 +++++++++
  1 file changed, 9 insertions(+)
system/Config.in +2 -0
index 232bdfe763..70ddf8df3c 100644
@@ -141,6 +141,15 @@ comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.15, host and targe
  		!BR2_TOOLCHAIN_GCC_AT_LEAST_5 || \
  		!BR2_HOST_GCC_AT_LEAST_5
 
+comment "systemd highly recommends headers >= 4.15"
+	depends on BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS

system/Config.in comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.15, host and targe · line 155

Quoted 10 lines
system/Config.in +7 -0
+	depends on BR2_USE_MMU
+	depends on BR2_TOOLCHAIN_USES_GLIBC
+	depends on BR2_TOOLCHAIN_HAS_SSP
+	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
+	depends on BR2_HOST_GCC_AT_LEAST_5
+	depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15
+
  config BR2_INIT_NONE
  	bool "None"
  	select BR2_PACKAGE_SKELETON_INIT_NONE if BR2_ROOTFS_SKELETON_DEFAULT

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#8 lore raw
In reply to Norbert Lange
Quoted 17 lines · Norbert Lange

Following files changed *license* from CC0-1.0 to MIT-0:

(quoted diff) +0 -3
-   src/systemctl/systemd-sysv-install.SKELETON
-   config files
-   examples under /network

The file LICENSES/MIT-0.txt has been added for this reason, hashes added, corrected for LICENSES/README.md.

Kernel version 3.15 is now the bare minimum, but only version 4.15 and higher are fully supported and tested:

(quoted diff) +0 -3
-   bump kernel header dependencies
-   correct kconfig description
-   improvements to make the kconfig description better reflect
     the information from the README
Quoted 1 line

Remove upstreamed patch.

This is not actually done in this v8, probably left over from some earlier
version.

Quoted 7 lines

Set new options to their default, remove -Defi-cc option.

Set -Ddbus=false to ensure dbus dependency is runtime only.

Set -Ddbus-interfaces-dir=no as interface XML file generation is not supported when cross compiling.

I guess we could set this to yes for host-systemd, then copy the XML files to
target. But they probably depend to some extent on the configuration, and it adds a lot to build time, and I doubt it is very useful to begin with...

Quoted 5 lines

Set -Ddefault-user-shell=/bin/sh to the always available shell.

[snip]

Quoted 9 lines

---

License diff for illustration

LICENSES/README.md +0 -0
@@ -45,9 +45,11 @@
   * the following sources are licensed under the **CC0-1.0** license:
     - src/basic/siphash24.c

LICENSES/README.md line 55

Quoted 10 lines
LICENSES/README.md +3 -1
     - src/basic/siphash24.h
-   - src/systemctl/systemd-sysv-install.SKELETON
     - tools/check-includes.pl
+  * the following sources are licensed under the **MIT-0** license:
     - all examples under man/
+   - src/systemctl/systemd-sysv-install.SKELETON
+   - config files and examples under /network
   * the following sources are under **Public Domain** (LicenseRef-murmurhash2-public-domain):
     - src/basic/MurmurHash2.c
     - src/basic/MurmurHash2.h

Very nice that you include this! However, git-am (and patchwork) interpret
this as a hunk of the overall patch, so it fails and I had to manually adapt. In the future, please prefix with a space or something to avoid that.

Applied to master, thanks. (Not pushed yet, I may make more changes while
reviewing the rest of the series.)

Regards,
Arnout

Quoted 170 lines

package/systemd: 252.4

---
  package/systemd/Config.in    | 12 +++++++++---
  package/systemd/systemd.hash |  5 +++--
  package/systemd/systemd.mk   | 16 ++++++++++++++--
  system/Config.in             |  6 +++---
  4 files changed, 29 insertions(+), 10 deletions(-)
package/systemd/Config.in +9 -3
index 45a9e2d644..f35305c0be 100644
@@ -22,7 +22,7 @@ menuconfig BR2_PACKAGE_SYSTEMD
  	depends on !BR2_STATIC_LIBS # kmod
  	depends on BR2_TOOLCHAIN_USES_GLIBC
  	depends on BR2_TOOLCHAIN_HAS_SSP
-	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
+	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15
  	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
  	depends on BR2_HOST_GCC_AT_LEAST_5 # host-systemd
  	select BR2_PACKAGE_HAS_UDEV
@@ -51,7 +51,11 @@ menuconfig BR2_PACKAGE_SYSTEMD
  	  an elaborate transactional dependency-based service control
  	  logic.  It can work as a drop-in replacement for sysvinit.
 
-	  Systemd requires a Linux kernel >= 3.13 with the following
+	  Kernel versions below 4.15 ("recommended baseline") have
+	  significant gaps in functionality and are not recommended
+	  for use with this version of systemd.
+
+	  Systemd requires a Linux kernel >= 3.15 with the following
  	  options enabled:
 
  	  - CONFIG_DEVTMPFS
@@ -66,9 +70,11 @@ menuconfig BR2_PACKAGE_SYSTEMD
  	  - CONFIG_PROC_FS
  	  - CONFIG_FHANDLE (libudev, mount and bind mount handling)
 
-	  - CONFIG_NET_NS (needed by PrivateNetwork=, used in some
+	  - CONFIG_NET_NS (Required for PrivateNetwork=, used in some
  	    systemd units)
 
+	  - CONFIG_USER_NS (Required for PrivateUsers=)
+
  	  - CONFIG_AUTOFS_FS / CONFIG_AUTOFS4_FS
  	  - CONFIG_TMPFS_POSIX_ACL
  	  - CONFIG_TMPFS_XATTR
package/systemd/systemd.hash +3 -2
index 3b98566f32..00c08edcd9 100644
@@ -1,5 +1,5 @@
  # sha256 locally computed
-sha256  638a2fc78828765fc97bc73f428205b6dc1d359149b6c6bfe4d2a649cba2cca8  systemd-250.8.tar.gz
+sha256  cf2d27e67663d599a045101c7178cf0ec63d9df2962a54adf7de0d0357724f00  systemd-252.4.tar.gz
  sha256  ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6  LICENSE.GPL2
  sha256  dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551  LICENSE.LGPL2.1
  sha256  e5a8645ad94aab24e312dd0c6be2aa54236eb9374480b1b14ea5c61598874fd5  LICENSES/BSD-2-Clause.txt
@@ -8,7 +8,8 @@ sha256  a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499  LICENS
  sha256  61778e80a2fd85955b626b29aa2bcf06144c714277bded65633e4a81479d9fb3  LICENSES/LGPL-2.0-or-later.txt
  sha256  5bcef4fedbfc08776630e65d5d0d074dd31208037eddb167ca46a9ec4f737764  LICENSES/Linux-syscall-note.txt
  sha256  790ac93fb2859097bdda4cf08b5a4feb5e479d0cb2c74f403248241bc3e7c216  LICENSES/lookup3-public-domain.txt
+sha256  8a6fc0879cecc0b96bf4c08159b9d733bf0f15fcf32879aec98c4ffd05424554  LICENSES/MIT-0.txt
  sha256  b85dcd3e453d05982552c52b5fc9e0bdd6d23c6f8e844b984a88af32570b0cc0  LICENSES/MIT.txt
  sha256  2a98749f6bec00dfaed86fa9c1edea871aaae4f11ee4d100b671aaf4ce353a73  LICENSES/murmurhash2-public-domain.txt
  sha256  1a7adaa2c86cedfd6c7f5c0c7c72fd6d3e02cd0c9593f21fdb53c89bb2b130ec  LICENSES/OFL-1.1.txt
-sha256  11801e931f252252a16eac8299465510d0a82c36bfd9ac8aea9b202b76d2f82b  LICENSES/README.md
+sha256  da9b2c7b8cd10516fd2c4279b82496ea61787148f13e899c62fc8988c5fac34f  LICENSES/README.md
package/systemd/systemd.mk +14 -2
index b96873b73f..b0597f9bb4 100644
@@ -19,7 +19,7 @@
  # - Diff sysusers.d with the previous version
  # - Diff factory/etc/nsswitch.conf with the previous version
  #   (details are often sprinkled around in README and manpages)
-SYSTEMD_VERSION = 250.8
+SYSTEMD_VERSION = 252.4
  SYSTEMD_SITE = $(call github,systemd,systemd-stable,v$(SYSTEMD_VERSION))
  SYSTEMD_LICENSE = \
  	LGPL-2.1+, \
@@ -29,6 +29,7 @@ SYSTEMD_LICENSE = \
  	BSD-3-Clause (tools/chromiumos), \
  	CC0-1.0 (few source files, see LICENSES/README.md), \
  	GPL-2.0 with Linux-syscall-note (linux kernel headers), \
+	MIT-0 (few source files, see LICENSES/README.md), \
  	MIT (few source files, see LICENSES/README.md), \
  	OFL-1.1 (Heebo fonts)
  SYSTEMD_LICENSE_FILES = \
@@ -40,6 +41,7 @@ SYSTEMD_LICENSE_FILES = \
  	LICENSES/LGPL-2.0-or-later.txt \
  	LICENSES/Linux-syscall-note.txt \
  	LICENSES/lookup3-public-domain.txt \
+	LICENSES/MIT-0.txt \
  	LICENSES/MIT.txt \
  	LICENSES/murmurhash2-public-domain.txt \
  	LICENSES/OFL-1.1.txt \
@@ -61,7 +63,13 @@ SYSTEMD_SELINUX_MODULES = systemd udev xdg
  SYSTEMD_PROVIDES = udev
 
  SYSTEMD_CONF_OPTS += \
+	-Ddbus=false \
+	-Ddbus-interfaces-dir=no \
+	-Ddefault-compression='auto' \
  	-Ddefault-hierarchy=unified \
+	-Ddefault-locale='C.UTF-8' \
+	-Ddefault-user-shell=/bin/sh \
+	-Dfirst-boot-full-preset=false \
  	-Didn=true \
  	-Dima=false \
  	-Dkexec-path=/usr/sbin/kexec \
@@ -72,6 +80,7 @@ SYSTEMD_CONF_OPTS += \
  	-Dman=false \
  	-Dmount-path=/usr/bin/mount \
  	-Dmode=release \
+	-Dnspawn-locale='C.UTF-8' \
  	-Dnss-systemd=true \
  	-Dquotacheck-path=/usr/sbin/quotacheck \
  	-Dquotaon-path=/usr/sbin/quotaon \
@@ -82,6 +91,7 @@ SYSTEMD_CONF_OPTS += \
  	-Dsulogin-path=/usr/sbin/sulogin \
  	-Dsystem-gid-max=999 \
  	-Dsystem-uid-max=999 \
+	-Dsysupdate=false \
  	-Dsysvinit-path= \
  	-Dsysvrcnd-path= \
  	-Dtelinit-path= \
@@ -553,7 +563,6 @@ SYSTEMD_DEPENDENCIES += gnu-efi
  SYSTEMD_CONF_OPTS += \
  	-Defi=true \
  	-Dgnu-efi=true \
-	-Defi-cc=$(TARGET_CC) \
  	-Defi-ld=bfd \
  	-Defi-libdir=$(STAGING_DIR)/usr/lib \
  	-Defi-includedir=$(STAGING_DIR)/usr/include/efi
@@ -793,6 +802,8 @@ HOST_SYSTEMD_CONF_OPTS = \
  	-Dbinfmt=false \
  	-Drepart=false \
  	-Dcoredump=false \
+	-Ddbus=false \
+	-Ddbus-interfaces-dir=no \
  	-Dpstore=false \
  	-Doomd=false \
  	-Dlogind=false \
@@ -801,6 +812,7 @@ HOST_SYSTEMD_CONF_OPTS = \
  	-Dmachined=false \
  	-Dportabled=false \
  	-Dsysext=false \
+	-Dsysupdate=false \
  	-Duserdb=false \
  	-Dhomed=false \
  	-Dnetworkd=false \
system/Config.in +1 -2
index 806a747315..232bdfe763 100644
@@ -125,19 +125,19 @@ config BR2_INIT_SYSTEMD
  	depends on BR2_TOOLCHAIN_USES_GLIBC
  	depends on BR2_TOOLCHAIN_HAS_SSP
  	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
+	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15
  	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
  	depends on BR2_HOST_GCC_AT_LEAST_5
  	select BR2_ROOTFS_MERGED_USR
  	select BR2_PACKAGE_SYSTEMD
  	select BR2_PACKAGE_SKELETON_INIT_SYSTEMD if BR2_ROOTFS_SKELETON_DEFAULT
 
-comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.10, host and target gcc >= 5"

system/Config.in config BR2_INIT_SYSTEMD · line 143

Quoted 10 lines
system/Config.in +2 -1
+comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.15, host and target gcc >= 5"
  	depends on BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS
  	depends on BR2_USE_MMU
  	depends on !BR2_TOOLCHAIN_USES_GLIBC || \
  		!BR2_TOOLCHAIN_HAS_SSP || \
-		!BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || \
+		!BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15 || \
  		!BR2_TOOLCHAIN_GCC_AT_LEAST_5 || \
  		!BR2_HOST_GCC_AT_LEAST_5
 

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#9 lore raw

Am Di., 7. Feb. 2023 um 17:41 Uhr schrieb Arnout Vandecappelle <[email protected]>:

Quoted 21 lines · Norbert Lange
Quoted 17 lines

Following files changed *license* from CC0-1.0 to MIT-0:

(quoted diff) +0 -3
-   src/systemctl/systemd-sysv-install.SKELETON
-   config files
-   examples under /network

The file LICENSES/MIT-0.txt has been added for this reason, hashes added, corrected for LICENSES/README.md.

Kernel version 3.15 is now the bare minimum, but only version 4.15 and higher are fully supported and tested:

(quoted diff) +0 -3
-   bump kernel header dependencies
-   correct kconfig description
-   improvements to make the kconfig description better reflect
     the information from the README
Quoted 4 lines
Quoted 1 line

Remove upstreamed patch.

This is not actually done in this v8, probably left over from some earlier
version.

possibly lost when rebasing

Quoted 4 lines
Quoted 4 lines

Set new options to their default, remove -Defi-cc option.

Quoted 8 lines
Quoted 4 lines

Set -Ddbus=false to ensure dbus dependency is runtime only.

Set -Ddbus-interfaces-dir=no as interface XML file generation is not supported when cross compiling.

I guess we could set this to yes for host-systemd, then copy the XML files to
target. But they probably depend to some extent on the configuration, and it adds a lot to build time, and I doubt it is very useful to begin with...

Dont know what they are used for, outside of dev tools

Quoted 23 lines
Quoted 6 lines

Set -Ddefault-user-shell=/bin/sh to the always available shell.

[snip]

Quoted 15 lines

---

License diff for illustration

LICENSES/README.md +2 -1
@@ -45,9 +45,11 @@
   * the following sources are licensed under the **CC0-1.0** license:
     - src/basic/siphash24.c
     - src/basic/siphash24.h
-   - src/systemctl/systemd-sysv-install.SKELETON
     - tools/check-includes.pl
+  * the following sources are licensed under the **MIT-0** license:
     - all examples under man/
+   - src/systemctl/systemd-sysv-install.SKELETON
Quoted 8 lines

LICENSES/README.md line 55

Quoted 4 lines
LICENSES/README.md +1 -0
+   - config files and examples under /network
   * the following sources are under **Public Domain** (LicenseRef-murmurhash2-public-domain):
     - src/basic/MurmurHash2.c
     - src/basic/MurmurHash2.h

Very nice that you include this! However, git-am (and patchwork) interpret
this as a hunk of the overall patch, so it fails and I had to manually adapt. In the future, please prefix with a space or something to avoid that.

Ok, but I probably forget it till I the next time, my git commit message scheme is a fuzzy copy of stuff I seen.

Quoted 3 lines

Applied to master, thanks. (Not pushed yet, I may make more changes while
reviewing the rest of the series.)

Wouldnt mind if you do a stealthy bump to 254.5 before going through all testing trouble ;)

Regards, Norbert

Quoted 173 lines

Regards,
Arnout

Quoted 169 lines

package/systemd: 252.4

---
  package/systemd/Config.in    | 12 +++++++++---
  package/systemd/systemd.hash |  5 +++--
  package/systemd/systemd.mk   | 16 ++++++++++++++--
  system/Config.in             |  6 +++---
  4 files changed, 29 insertions(+), 10 deletions(-)
package/systemd/Config.in +9 -3
index 45a9e2d644..f35305c0be 100644
@@ -22,7 +22,7 @@ menuconfig BR2_PACKAGE_SYSTEMD
      depends on !BR2_STATIC_LIBS # kmod
      depends on BR2_TOOLCHAIN_USES_GLIBC
      depends on BR2_TOOLCHAIN_HAS_SSP
-     depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
+     depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15
      depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
      depends on BR2_HOST_GCC_AT_LEAST_5 # host-systemd
      select BR2_PACKAGE_HAS_UDEV
@@ -51,7 +51,11 @@ menuconfig BR2_PACKAGE_SYSTEMD
        an elaborate transactional dependency-based service control
        logic.  It can work as a drop-in replacement for sysvinit.
 
-       Systemd requires a Linux kernel >= 3.13 with the following
+       Kernel versions below 4.15 ("recommended baseline") have
+       significant gaps in functionality and are not recommended
+       for use with this version of systemd.
+
+       Systemd requires a Linux kernel >= 3.15 with the following
        options enabled:
 
        - CONFIG_DEVTMPFS
@@ -66,9 +70,11 @@ menuconfig BR2_PACKAGE_SYSTEMD
        - CONFIG_PROC_FS
        - CONFIG_FHANDLE (libudev, mount and bind mount handling)
 
-       - CONFIG_NET_NS (needed by PrivateNetwork=, used in some
+       - CONFIG_NET_NS (Required for PrivateNetwork=, used in some
          systemd units)
 
+       - CONFIG_USER_NS (Required for PrivateUsers=)
+
        - CONFIG_AUTOFS_FS / CONFIG_AUTOFS4_FS
        - CONFIG_TMPFS_POSIX_ACL
        - CONFIG_TMPFS_XATTR
package/systemd/systemd.hash +3 -2
index 3b98566f32..00c08edcd9 100644
@@ -1,5 +1,5 @@
  # sha256 locally computed
-sha256  638a2fc78828765fc97bc73f428205b6dc1d359149b6c6bfe4d2a649cba2cca8  systemd-250.8.tar.gz
+sha256  cf2d27e67663d599a045101c7178cf0ec63d9df2962a54adf7de0d0357724f00  systemd-252.4.tar.gz
  sha256  ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6  LICENSE.GPL2
  sha256  dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551  LICENSE.LGPL2.1
  sha256  e5a8645ad94aab24e312dd0c6be2aa54236eb9374480b1b14ea5c61598874fd5  LICENSES/BSD-2-Clause.txt
@@ -8,7 +8,8 @@ sha256  a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499  LICENS
  sha256  61778e80a2fd85955b626b29aa2bcf06144c714277bded65633e4a81479d9fb3  LICENSES/LGPL-2.0-or-later.txt
  sha256  5bcef4fedbfc08776630e65d5d0d074dd31208037eddb167ca46a9ec4f737764  LICENSES/Linux-syscall-note.txt
  sha256  790ac93fb2859097bdda4cf08b5a4feb5e479d0cb2c74f403248241bc3e7c216  LICENSES/lookup3-public-domain.txt
+sha256  8a6fc0879cecc0b96bf4c08159b9d733bf0f15fcf32879aec98c4ffd05424554  LICENSES/MIT-0.txt
  sha256  b85dcd3e453d05982552c52b5fc9e0bdd6d23c6f8e844b984a88af32570b0cc0  LICENSES/MIT.txt
  sha256  2a98749f6bec00dfaed86fa9c1edea871aaae4f11ee4d100b671aaf4ce353a73  LICENSES/murmurhash2-public-domain.txt
  sha256  1a7adaa2c86cedfd6c7f5c0c7c72fd6d3e02cd0c9593f21fdb53c89bb2b130ec  LICENSES/OFL-1.1.txt
-sha256  11801e931f252252a16eac8299465510d0a82c36bfd9ac8aea9b202b76d2f82b  LICENSES/README.md
+sha256  da9b2c7b8cd10516fd2c4279b82496ea61787148f13e899c62fc8988c5fac34f  LICENSES/README.md
package/systemd/systemd.mk +14 -2
index b96873b73f..b0597f9bb4 100644
@@ -19,7 +19,7 @@
  # - Diff sysusers.d with the previous version
  # - Diff factory/etc/nsswitch.conf with the previous version
  #   (details are often sprinkled around in README and manpages)
-SYSTEMD_VERSION = 250.8
+SYSTEMD_VERSION = 252.4
  SYSTEMD_SITE = $(call github,systemd,systemd-stable,v$(SYSTEMD_VERSION))
  SYSTEMD_LICENSE = \
      LGPL-2.1+, \
@@ -29,6 +29,7 @@ SYSTEMD_LICENSE = \
      BSD-3-Clause (tools/chromiumos), \
      CC0-1.0 (few source files, see LICENSES/README.md), \
      GPL-2.0 with Linux-syscall-note (linux kernel headers), \
+     MIT-0 (few source files, see LICENSES/README.md), \
      MIT (few source files, see LICENSES/README.md), \
      OFL-1.1 (Heebo fonts)
  SYSTEMD_LICENSE_FILES = \
@@ -40,6 +41,7 @@ SYSTEMD_LICENSE_FILES = \
      LICENSES/LGPL-2.0-or-later.txt \
      LICENSES/Linux-syscall-note.txt \
      LICENSES/lookup3-public-domain.txt \
+     LICENSES/MIT-0.txt \
      LICENSES/MIT.txt \
      LICENSES/murmurhash2-public-domain.txt \
      LICENSES/OFL-1.1.txt \
@@ -61,7 +63,13 @@ SYSTEMD_SELINUX_MODULES = systemd udev xdg
  SYSTEMD_PROVIDES = udev
 
  SYSTEMD_CONF_OPTS += \
+     -Ddbus=false \
+     -Ddbus-interfaces-dir=no \
+     -Ddefault-compression='auto' \
      -Ddefault-hierarchy=unified \
+     -Ddefault-locale='C.UTF-8' \
+     -Ddefault-user-shell=/bin/sh \
+     -Dfirst-boot-full-preset=false \
      -Didn=true \
      -Dima=false \
      -Dkexec-path=/usr/sbin/kexec \
@@ -72,6 +80,7 @@ SYSTEMD_CONF_OPTS += \
      -Dman=false \
      -Dmount-path=/usr/bin/mount \
      -Dmode=release \
+     -Dnspawn-locale='C.UTF-8' \
      -Dnss-systemd=true \
      -Dquotacheck-path=/usr/sbin/quotacheck \
      -Dquotaon-path=/usr/sbin/quotaon \
@@ -82,6 +91,7 @@ SYSTEMD_CONF_OPTS += \
      -Dsulogin-path=/usr/sbin/sulogin \
      -Dsystem-gid-max=999 \
      -Dsystem-uid-max=999 \
+     -Dsysupdate=false \
      -Dsysvinit-path= \
      -Dsysvrcnd-path= \
      -Dtelinit-path= \
@@ -553,7 +563,6 @@ SYSTEMD_DEPENDENCIES += gnu-efi
  SYSTEMD_CONF_OPTS += \
      -Defi=true \
      -Dgnu-efi=true \
-     -Defi-cc=$(TARGET_CC) \
      -Defi-ld=bfd \
      -Defi-libdir=$(STAGING_DIR)/usr/lib \
      -Defi-includedir=$(STAGING_DIR)/usr/include/efi
@@ -793,6 +802,8 @@ HOST_SYSTEMD_CONF_OPTS = \
      -Dbinfmt=false \
      -Drepart=false \
      -Dcoredump=false \
+     -Ddbus=false \
+     -Ddbus-interfaces-dir=no \
      -Dpstore=false \
      -Doomd=false \
      -Dlogind=false \
@@ -801,6 +812,7 @@ HOST_SYSTEMD_CONF_OPTS = \
      -Dmachined=false \
      -Dportabled=false \
      -Dsysext=false \
+     -Dsysupdate=false \
      -Duserdb=false \
      -Dhomed=false \
      -Dnetworkd=false \
system/Config.in +1 -1
index 806a747315..232bdfe763 100644
@@ -125,19 +125,19 @@ config BR2_INIT_SYSTEMD
      depends on BR2_TOOLCHAIN_USES_GLIBC
      depends on BR2_TOOLCHAIN_HAS_SSP
      depends on BR2_TOOLCHAIN_HAS_THREADS
-     depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
+     depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15
      depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
      depends on BR2_HOST_GCC_AT_LEAST_5
      select BR2_ROOTFS_MERGED_USR
      select BR2_PACKAGE_SYSTEMD
      select BR2_PACKAGE_SKELETON_INIT_SYSTEMD if BR2_ROOTFS_SKELETON_DEFAULT
 
Quoted 11 lines

system/Config.in config BR2_INIT_SYSTEMD · line 143

Quoted 11 lines
system/Config.in +2 -2
-comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.10, host and target gcc >= 5"
+comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.15, host and target gcc >= 5"
      depends on BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS
      depends on BR2_USE_MMU
      depends on !BR2_TOOLCHAIN_USES_GLIBC || \
              !BR2_TOOLCHAIN_HAS_SSP || \
-             !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || \
+             !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15 || \
              !BR2_TOOLCHAIN_GCC_AT_LEAST_5 || \
              !BR2_HOST_GCC_AT_LEAST_5
 

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#10 lore raw
Quoted 5 lines · Norbert Lange

Am Di., 7. Feb. 2023 um 17:41 Uhr schrieb Arnout Vandecappelle <[email protected]>:

Quoted 4 lines · Norbert Lange

[snip]

Quoted 5 lines
Quoted 2 lines

Applied to master, thanks. (Not pushed yet, I may make more changes while
reviewing the rest of the series.)

Wouldnt mind if you do a stealthy bump to 254.5 before going through all testing trouble ;)

I'm afraid I already pushed now...

Regards,
Arnout

Quoted 175 lines

Regards, Norbert

Quoted 173 lines

Regards,
Arnout

Quoted 169 lines

package/systemd: 252.4

---
   package/systemd/Config.in    | 12 +++++++++---
   package/systemd/systemd.hash |  5 +++--
   package/systemd/systemd.mk   | 16 ++++++++++++++--
   system/Config.in             |  6 +++---
   4 files changed, 29 insertions(+), 10 deletions(-)
package/systemd/Config.in +9 -3
index 45a9e2d644..f35305c0be 100644
@@ -22,7 +22,7 @@ menuconfig BR2_PACKAGE_SYSTEMD
       depends on !BR2_STATIC_LIBS # kmod
       depends on BR2_TOOLCHAIN_USES_GLIBC
       depends on BR2_TOOLCHAIN_HAS_SSP
-     depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
+     depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15
       depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
       depends on BR2_HOST_GCC_AT_LEAST_5 # host-systemd
       select BR2_PACKAGE_HAS_UDEV
@@ -51,7 +51,11 @@ menuconfig BR2_PACKAGE_SYSTEMD
         an elaborate transactional dependency-based service control
         logic.  It can work as a drop-in replacement for sysvinit.
 
-       Systemd requires a Linux kernel >= 3.13 with the following
+       Kernel versions below 4.15 ("recommended baseline") have
+       significant gaps in functionality and are not recommended
+       for use with this version of systemd.
+
+       Systemd requires a Linux kernel >= 3.15 with the following
         options enabled:
 
         - CONFIG_DEVTMPFS
@@ -66,9 +70,11 @@ menuconfig BR2_PACKAGE_SYSTEMD
         - CONFIG_PROC_FS
         - CONFIG_FHANDLE (libudev, mount and bind mount handling)
 
-       - CONFIG_NET_NS (needed by PrivateNetwork=, used in some
+       - CONFIG_NET_NS (Required for PrivateNetwork=, used in some
           systemd units)
 
+       - CONFIG_USER_NS (Required for PrivateUsers=)
+
         - CONFIG_AUTOFS_FS / CONFIG_AUTOFS4_FS
         - CONFIG_TMPFS_POSIX_ACL
         - CONFIG_TMPFS_XATTR
package/systemd/systemd.hash +3 -2
index 3b98566f32..00c08edcd9 100644
@@ -1,5 +1,5 @@
   # sha256 locally computed
-sha256  638a2fc78828765fc97bc73f428205b6dc1d359149b6c6bfe4d2a649cba2cca8  systemd-250.8.tar.gz
+sha256  cf2d27e67663d599a045101c7178cf0ec63d9df2962a54adf7de0d0357724f00  systemd-252.4.tar.gz
   sha256  ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6  LICENSE.GPL2
   sha256  dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551  LICENSE.LGPL2.1
   sha256  e5a8645ad94aab24e312dd0c6be2aa54236eb9374480b1b14ea5c61598874fd5  LICENSES/BSD-2-Clause.txt
@@ -8,7 +8,8 @@ sha256  a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499  LICENS
   sha256  61778e80a2fd85955b626b29aa2bcf06144c714277bded65633e4a81479d9fb3  LICENSES/LGPL-2.0-or-later.txt
   sha256  5bcef4fedbfc08776630e65d5d0d074dd31208037eddb167ca46a9ec4f737764  LICENSES/Linux-syscall-note.txt
   sha256  790ac93fb2859097bdda4cf08b5a4feb5e479d0cb2c74f403248241bc3e7c216  LICENSES/lookup3-public-domain.txt
+sha256  8a6fc0879cecc0b96bf4c08159b9d733bf0f15fcf32879aec98c4ffd05424554  LICENSES/MIT-0.txt
   sha256  b85dcd3e453d05982552c52b5fc9e0bdd6d23c6f8e844b984a88af32570b0cc0  LICENSES/MIT.txt
   sha256  2a98749f6bec00dfaed86fa9c1edea871aaae4f11ee4d100b671aaf4ce353a73  LICENSES/murmurhash2-public-domain.txt
   sha256  1a7adaa2c86cedfd6c7f5c0c7c72fd6d3e02cd0c9593f21fdb53c89bb2b130ec  LICENSES/OFL-1.1.txt
-sha256  11801e931f252252a16eac8299465510d0a82c36bfd9ac8aea9b202b76d2f82b  LICENSES/README.md
+sha256  da9b2c7b8cd10516fd2c4279b82496ea61787148f13e899c62fc8988c5fac34f  LICENSES/README.md
package/systemd/systemd.mk +14 -2
index b96873b73f..b0597f9bb4 100644
@@ -19,7 +19,7 @@
   # - Diff sysusers.d with the previous version
   # - Diff factory/etc/nsswitch.conf with the previous version
   #   (details are often sprinkled around in README and manpages)
-SYSTEMD_VERSION = 250.8
+SYSTEMD_VERSION = 252.4
   SYSTEMD_SITE = $(call github,systemd,systemd-stable,v$(SYSTEMD_VERSION))
   SYSTEMD_LICENSE = \
       LGPL-2.1+, \
@@ -29,6 +29,7 @@ SYSTEMD_LICENSE = \
       BSD-3-Clause (tools/chromiumos), \
       CC0-1.0 (few source files, see LICENSES/README.md), \
       GPL-2.0 with Linux-syscall-note (linux kernel headers), \
+     MIT-0 (few source files, see LICENSES/README.md), \
       MIT (few source files, see LICENSES/README.md), \
       OFL-1.1 (Heebo fonts)
   SYSTEMD_LICENSE_FILES = \
@@ -40,6 +41,7 @@ SYSTEMD_LICENSE_FILES = \
       LICENSES/LGPL-2.0-or-later.txt \
       LICENSES/Linux-syscall-note.txt \
       LICENSES/lookup3-public-domain.txt \
+     LICENSES/MIT-0.txt \
       LICENSES/MIT.txt \
       LICENSES/murmurhash2-public-domain.txt \
       LICENSES/OFL-1.1.txt \
@@ -61,7 +63,13 @@ SYSTEMD_SELINUX_MODULES = systemd udev xdg
   SYSTEMD_PROVIDES = udev
 
   SYSTEMD_CONF_OPTS += \
+     -Ddbus=false \
+     -Ddbus-interfaces-dir=no \
+     -Ddefault-compression='auto' \
       -Ddefault-hierarchy=unified \
+     -Ddefault-locale='C.UTF-8' \
+     -Ddefault-user-shell=/bin/sh \
+     -Dfirst-boot-full-preset=false \
       -Didn=true \
       -Dima=false \
       -Dkexec-path=/usr/sbin/kexec \
@@ -72,6 +80,7 @@ SYSTEMD_CONF_OPTS += \
       -Dman=false \
       -Dmount-path=/usr/bin/mount \
       -Dmode=release \
+     -Dnspawn-locale='C.UTF-8' \
       -Dnss-systemd=true \
       -Dquotacheck-path=/usr/sbin/quotacheck \
       -Dquotaon-path=/usr/sbin/quotaon \
@@ -82,6 +91,7 @@ SYSTEMD_CONF_OPTS += \
       -Dsulogin-path=/usr/sbin/sulogin \
       -Dsystem-gid-max=999 \
       -Dsystem-uid-max=999 \
+     -Dsysupdate=false \
       -Dsysvinit-path= \
       -Dsysvrcnd-path= \
       -Dtelinit-path= \
@@ -553,7 +563,6 @@ SYSTEMD_DEPENDENCIES += gnu-efi
   SYSTEMD_CONF_OPTS += \
       -Defi=true \
       -Dgnu-efi=true \
-     -Defi-cc=$(TARGET_CC) \
       -Defi-ld=bfd \
       -Defi-libdir=$(STAGING_DIR)/usr/lib \
       -Defi-includedir=$(STAGING_DIR)/usr/include/efi
@@ -793,6 +802,8 @@ HOST_SYSTEMD_CONF_OPTS = \
       -Dbinfmt=false \
       -Drepart=false \
       -Dcoredump=false \
+     -Ddbus=false \
+     -Ddbus-interfaces-dir=no \
       -Dpstore=false \
       -Doomd=false \
       -Dlogind=false \
@@ -801,6 +812,7 @@ HOST_SYSTEMD_CONF_OPTS = \
       -Dmachined=false \
       -Dportabled=false \
       -Dsysext=false \
+     -Dsysupdate=false \
       -Duserdb=false \
       -Dhomed=false \
       -Dnetworkd=false \
system/Config.in +1 -1
index 806a747315..232bdfe763 100644
@@ -125,19 +125,19 @@ config BR2_INIT_SYSTEMD
       depends on BR2_TOOLCHAIN_USES_GLIBC
       depends on BR2_TOOLCHAIN_HAS_SSP
       depends on BR2_TOOLCHAIN_HAS_THREADS
-     depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
+     depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15
       depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
       depends on BR2_HOST_GCC_AT_LEAST_5
       select BR2_ROOTFS_MERGED_USR
       select BR2_PACKAGE_SYSTEMD
       select BR2_PACKAGE_SKELETON_INIT_SYSTEMD if BR2_ROOTFS_SKELETON_DEFAULT
 
Quoted 11 lines
Quoted 11 lines

system/Config.in config BR2_INIT_SYSTEMD · line 143

Quoted 11 lines
system/Config.in +2 -2
-comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.10, host and target gcc >= 5"
+comment "systemd needs a glibc toolchain w/ SSP, headers >= 3.15, host and target gcc >= 5"
       depends on BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS
       depends on BR2_USE_MMU
       depends on !BR2_TOOLCHAIN_USES_GLIBC || \
               !BR2_TOOLCHAIN_HAS_SSP || \
-             !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || \
+             !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15 || \
               !BR2_TOOLCHAIN_GCC_AT_LEAST_5 || \
               !BR2_HOST_GCC_AT_LEAST_5
 

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot