Skip to contentSkip to conversation

scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace

PATCH In review Sasha Levin 2 participants 19 messages Jan 16, 2023 – Jan 23, 2023

Subsystems (8)
Stable branch SCSI KVM HID +4 more subsystems
lore
Share & tools
lore
author maintainer
#4 lore raw

PATCH 5/17 drm: Add orientation quirk for Lenovo ideapad D330-10IGL

In reply to Sasha Levin

From: Patrick Thompson <[email protected]>

[ Upstream commit 0688773f0710528e1ab302c3d6317e269f2e2e6e ]

Panel is 800x1280 but mounted on a detachable form factor sideways.

---
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/drm_panel_orientation_quirks.c +6 -0
index ca0fefeaab20..ce739ba45c55 100644
@@ -272,6 +272,12 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGM"),
 		},
 		.driver_data = (void *)&lcd1200x1920_rightside_up,
+	}, {	/* Lenovo Ideapad D330-10IGL (HD) */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGL"),
+		},
+		.driver_data = (void *)&lcd800x1280_rightside_up,
 	}, {	/* Lenovo Yoga Book X90F / X91F / X91L */
 		.matches = {
 		  /* Non exact match to match all versions */
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/17 ASoC: fsl_micfil: Correct the number of steps on SX controls

In reply to Sasha Levin

From: Chancel Liu <[email protected]>

[ Upstream commit cdfa92eb90f5770b26a79824ef213ebdbbd988b1 ]

The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps rather than maximum value. This patch corrects the minimum value to -8 and the number of steps to 15.

---
 sound/soc/fsl/fsl_micfil.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
sound/soc/fsl/fsl_micfil.c +8 -8
index 6c794605e33c..97f83c63e765 100644
@@ -87,21 +87,21 @@ static DECLARE_TLV_DB_SCALE(gain_tlv, 0, 100, 0);
 
 static const struct snd_kcontrol_new fsl_micfil_snd_controls[] = {
 	SOC_SINGLE_SX_TLV("CH0 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(0), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(0), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH1 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(1), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(1), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH2 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(2), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(2), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH3 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(3), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(3), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH4 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(4), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(4), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH5 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(5), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(5), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH6 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(6), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(6), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH7 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(7), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(7), 0x8, 0xF, gain_tlv),
 	SOC_ENUM_EXT("MICFIL Quality Select",
 		     fsl_micfil_quality_enum,
 		     snd_soc_get_enum_double, snd_soc_put_enum_double),
Signature · 1 line
2.35.1
author maintainer
#8 lore raw

PATCH 9/17 ASoC: fsl_ssi: Rename AC'97 streams to avoid collisions with AC'97 CODEC

In reply to Sasha Levin

From: Mark Brown <[email protected]>

[ Upstream commit 8c6a42b5b0ed6f96624f56954e93eeae107440a6 ]

The SSI driver calls the AC'97 playback and transmit streams "AC97 Playback" and "AC97 Capture" respectively. This is the same name used by the generic AC'97 CODEC driver in ASoC, creating confusion for the Freescale ASoC card when it attempts to use these widgets in routing. Add a "CPU" in the name like the regular DAIs registered by the driver to disambiguate.

---
 sound/soc/fsl/fsl-asoc-card.c | 8 ++++----
 sound/soc/fsl/fsl_ssi.c       | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)
sound/soc/fsl/fsl-asoc-card.c +4 -4
index 7cd14d6b9436..8c976fde44f0 100644
@@ -117,11 +117,11 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 static const struct snd_soc_dapm_route audio_map_ac97[] = {
 	/* 1st half -- Normal DAPM routes */
-	{"Playback",  NULL, "AC97 Playback"},
-	{"AC97 Capture",  NULL, "Capture"},
+	{"Playback",  NULL, "CPU AC97 Playback"},
+	{"CPU AC97 Capture",  NULL, "Capture"},
 	/* 2nd half -- ASRC DAPM routes */
-	{"AC97 Playback",  NULL, "ASRC-Playback"},
-	{"ASRC-Capture",  NULL, "AC97 Capture"},
+	{"CPU AC97 Playback",  NULL, "ASRC-Playback"},
+	{"ASRC-Capture",  NULL, "CPU AC97 Capture"},
 };
 
 static const struct snd_soc_dapm_route audio_map_tx[] = {
sound/soc/fsl/fsl_ssi.c +2 -2
index 1d774c876c52..94229ce1a30e 100644
@@ -1161,14 +1161,14 @@ static struct snd_soc_dai_driver fsl_ssi_ac97_dai = {
 	.symmetric_channels = 1,
 	.probe = fsl_ssi_dai_probe,
 	.playback = {
-		.stream_name = "AC97 Playback",
+		.stream_name = "CPU AC97 Playback",
 		.channels_min = 2,
 		.channels_max = 2,
 		.rates = SNDRV_PCM_RATE_8000_48000,
 		.formats = SNDRV_PCM_FMTBIT_S16 | SNDRV_PCM_FMTBIT_S20,
 	},
 	.capture = {
-		.stream_name = "AC97 Capture",
+		.stream_name = "CPU AC97 Capture",
 		.channels_min = 2,
 		.channels_max = 2,
 		.rates = SNDRV_PCM_RATE_48000,
Signature · 1 line
2.35.1
author maintainer
#9 lore raw

PATCH 10/17 ASoC: fsl-asoc-card: Fix naming of AC'97 CODEC widgets

In reply to Sasha Levin

From: Mark Brown <[email protected]>

[ Upstream commit 242fc66ae6e1e2b8519daacc7590a73cd0e8a6e4 ]

The fsl-asoc-card AC'97 support currently tries to route to Playback and Capture widgets provided by the AC'97 CODEC. This doesn't work since the generic AC'97 driver registers with an "AC97" at the front of the stream and hence widget names, update to reflect reality. It's not clear to me if or how this ever worked.

---
 sound/soc/fsl/fsl-asoc-card.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/fsl/fsl-asoc-card.c +2 -2
index 8c976fde44f0..9a756d0a6032 100644
@@ -117,8 +117,8 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 static const struct snd_soc_dapm_route audio_map_ac97[] = {
 	/* 1st half -- Normal DAPM routes */
-	{"Playback",  NULL, "CPU AC97 Playback"},
-	{"CPU AC97 Capture",  NULL, "Capture"},
+	{"AC97 Playback",  NULL, "CPU AC97 Playback"},
+	{"CPU AC97 Capture",  NULL, "AC97 Capture"},
 	/* 2nd half -- ASRC DAPM routes */
 	{"CPU AC97 Playback",  NULL, "ASRC-Playback"},
 	{"ASRC-Capture",  NULL, "CPU AC97 Capture"},
Signature · 1 line
2.35.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/17 scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace

From: Wenchao Hao <[email protected]>

[ Upstream commit a3be19b91ea7121d388084e8c07f5b1b982eb40c ]

It was observed that the kernel would potentially send ISCSI_KEVENT_UNBIND_SESSION multiple times. Introduce 'target_state' in iscsi_cls_session() to make sure session will send only one unbind session event.

This introduces a regression wrt. the issue fixed in commit 13e60d3ba287 ("scsi: iscsi: Report unbind session event when the target has been removed"). If iscsid dies for any reason after sending an unbind session to kernel, once iscsid is restarted, the kernel's ISCSI_KEVENT_UNBIND_SESSION event is lost and userspace is then unable to logout. However, the session is actually in invalid state (its target_id is INVALID) so iscsid should not sync this session during restart.

Consequently we need to check the session's target state during iscsid restart. If session is in unbound state, do not sync this session and perform session teardown. This is OK because once a session is unbound, we can not recover it any more (mainly because its target id is INVALID).

---
 drivers/scsi/scsi_transport_iscsi.c | 50 ++++++++++++++++++++++++++---
 include/scsi/scsi_transport_iscsi.h |  9 ++++++
 2 files changed, 54 insertions(+), 5 deletions(-)
drivers/scsi/scsi_transport_iscsi.c +45 -5
index ef7cd7520e7c..092bd6a3d64a 100644
@@ -1674,6 +1674,13 @@ static const char *iscsi_session_state_name(int state)
 	return name;
 }
 
+static char *iscsi_session_target_state_name[] = {
+	[ISCSI_SESSION_TARGET_UNBOUND]   = "UNBOUND",
+	[ISCSI_SESSION_TARGET_ALLOCATED] = "ALLOCATED",
+	[ISCSI_SESSION_TARGET_SCANNED]   = "SCANNED",
+	[ISCSI_SESSION_TARGET_UNBINDING] = "UNBINDING",
+};
+
 int iscsi_session_chkready(struct iscsi_cls_session *session)
 {
 	unsigned long flags;
@@ -1805,9 +1812,13 @@ static int iscsi_user_scan_session(struct device *dev, void *data)
 		if ((scan_data->channel == SCAN_WILD_CARD ||
 		     scan_data->channel == 0) &&
 		    (scan_data->id == SCAN_WILD_CARD ||
-		     scan_data->id == id))
+		     scan_data->id == id)) {
 			scsi_scan_target(&session->dev, 0, id,
 					 scan_data->lun, scan_data->rescan);
+			spin_lock_irqsave(&session->lock, flags);
+			session->target_state = ISCSI_SESSION_TARGET_SCANNED;
+			spin_unlock_irqrestore(&session->lock, flags);
+		}
 	}
 
 user_scan_exit:
@@ -1996,31 +2007,41 @@ static void __iscsi_unbind_session(struct work_struct *work)
 	struct iscsi_cls_host *ihost = shost->shost_data;
 	unsigned long flags;
 	unsigned int target_id;
+	bool remove_target = true;
 
 	ISCSI_DBG_TRANS_SESSION(session, "Unbinding session\n");
 
 	/* Prevent new scans and make sure scanning is not in progress */
 	mutex_lock(&ihost->mutex);
 	spin_lock_irqsave(&session->lock, flags);
-	if (session->target_id == ISCSI_MAX_TARGET) {
+	if (session->target_state == ISCSI_SESSION_TARGET_ALLOCATED) {
+		remove_target = false;
+	} else if (session->target_state != ISCSI_SESSION_TARGET_SCANNED) {
 		spin_unlock_irqrestore(&session->lock, flags);
 		mutex_unlock(&ihost->mutex);
-		goto unbind_session_exit;
+		ISCSI_DBG_TRANS_SESSION(session,
+			"Skipping target unbinding: Session is unbound/unbinding.\n");
+		return;
 	}
 
+	session->target_state = ISCSI_SESSION_TARGET_UNBINDING;
 	target_id = session->target_id;
 	session->target_id = ISCSI_MAX_TARGET;
 	spin_unlock_irqrestore(&session->lock, flags);
 	mutex_unlock(&ihost->mutex);
 
-	scsi_remove_target(&session->dev);
+	if (remove_target)
+		scsi_remove_target(&session->dev);
 
 	if (session->ida_used)
 		ida_simple_remove(&iscsi_sess_ida, target_id);
 
-unbind_session_exit:
 	iscsi_session_event(session, ISCSI_KEVENT_UNBIND_SESSION);
 	ISCSI_DBG_TRANS_SESSION(session, "Completed target removal\n");
+
+	spin_lock_irqsave(&session->lock, flags);
+	session->target_state = ISCSI_SESSION_TARGET_UNBOUND;
+	spin_unlock_irqrestore(&session->lock, flags);
 }
 
 static void __iscsi_destroy_session(struct work_struct *work)
@@ -2089,6 +2110,9 @@ int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id)
 		session->ida_used = true;
 	} else
 		session->target_id = target_id;
+	spin_lock_irqsave(&session->lock, flags);
+	session->target_state = ISCSI_SESSION_TARGET_ALLOCATED;
+	spin_unlock_irqrestore(&session->lock, flags);
 
 	dev_set_name(&session->dev, "session%u", session->sid);
 	err = device_add(&session->dev);
@@ -4343,6 +4367,19 @@ iscsi_session_attr(def_taskmgmt_tmo, ISCSI_PARAM_DEF_TASKMGMT_TMO, 0);
 iscsi_session_attr(discovery_parent_idx, ISCSI_PARAM_DISCOVERY_PARENT_IDX, 0);
 iscsi_session_attr(discovery_parent_type, ISCSI_PARAM_DISCOVERY_PARENT_TYPE, 0);
 
+static ssize_t
+show_priv_session_target_state(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct iscsi_cls_session *session = iscsi_dev_to_session(dev->parent);
+
+	return sysfs_emit(buf, "%s\n",
+			iscsi_session_target_state_name[session->target_state]);
+}
+
+static ISCSI_CLASS_ATTR(priv_sess, target_state, S_IRUGO,
+			show_priv_session_target_state, NULL);
+
 static ssize_t
 show_priv_session_state(struct device *dev, struct device_attribute *attr,
 			char *buf)
@@ -4445,6 +4482,7 @@ static struct attribute *iscsi_session_attrs[] = {
 	&dev_attr_sess_boot_target.attr,
 	&dev_attr_priv_sess_recovery_tmo.attr,
 	&dev_attr_priv_sess_state.attr,
+	&dev_attr_priv_sess_target_state.attr,
 	&dev_attr_priv_sess_creator.attr,
 	&dev_attr_sess_chap_out_idx.attr,
 	&dev_attr_sess_chap_in_idx.attr,
@@ -4558,6 +4596,8 @@ static umode_t iscsi_session_attr_is_visible(struct kobject *kobj,
 		return S_IRUGO | S_IWUSR;
 	else if (attr == &dev_attr_priv_sess_state.attr)
 		return S_IRUGO;
+	else if (attr == &dev_attr_priv_sess_target_state.attr)
+		return S_IRUGO;
 	else if (attr == &dev_attr_priv_sess_creator.attr)
 		return S_IRUGO;
 	else if (attr == &dev_attr_priv_sess_target_id.attr)
include/scsi/scsi_transport_iscsi.h +9 -0
index 037c77fb5dc5..c4de15f7a0a5 100644
@@ -236,6 +236,14 @@ enum {
 	ISCSI_SESSION_FREE,
 };
 
+enum {
+	ISCSI_SESSION_TARGET_UNBOUND,
+	ISCSI_SESSION_TARGET_ALLOCATED,
+	ISCSI_SESSION_TARGET_SCANNED,
+	ISCSI_SESSION_TARGET_UNBINDING,
+	ISCSI_SESSION_TARGET_MAX,
+};
+
 #define ISCSI_MAX_TARGET -1
 
 struct iscsi_cls_session {
@@ -262,6 +270,7 @@ struct iscsi_cls_session {
 	 */
 	pid_t creator;
 	int state;
+	int target_state;			/* session target bind state */
 	int sid;				/* session id */
 	void *dd_data;				/* LLD private data */
 	struct device dev;	/* sysfs transport/container device */
Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH 2/17 cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist

From: Sumit Gupta <[email protected]>

[ Upstream commit 01c5bb0cc2a39fbc56ff9a5ef28b79447f0c2351 ]

Tegra234 platform uses the tegra194-cpufreq driver, so add it to the blocklist in cpufreq-dt-platdev driver to avoid the cpufreq driver registration from there.

---
 drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
 1 file changed, 1 insertion(+)
drivers/cpufreq/cpufreq-dt-platdev.c +1 -0
index a3734014db47..aea285651fba 100644
@@ -130,6 +130,7 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "nvidia,tegra30", },
 	{ .compatible = "nvidia,tegra124", },
 	{ .compatible = "nvidia,tegra210", },
+	{ .compatible = "nvidia,tegra234", },
 
 	{ .compatible = "qcom,apq8096", },
 	{ .compatible = "qcom,msm8996", },
Signature · 1 line
2.35.1
author maintainer
#14 lore raw

PATCH 13/17 KVM: s390: interrupt: use READ_ONCE() before cmpxchg()

In reply to Sasha Levin

From: Heiko Carstens <[email protected]>

[ Upstream commit 42400d99e9f0728c17240edb9645637ead40f6b9 ]

Use READ_ONCE() before cmpxchg() to prevent that the compiler generates code that fetches the to be compared old value several times from memory.

---
 arch/s390/kvm/interrupt.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
arch/s390/kvm/interrupt.c +8 -4
index b51ab19eb972..64d1dfe6dca5 100644
@@ -81,8 +81,9 @@ static int sca_inject_ext_call(struct kvm_vcpu *vcpu, int src_id)
 		struct esca_block *sca = vcpu->kvm->arch.sca;
 		union esca_sigp_ctrl *sigp_ctrl =
 			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
-		union esca_sigp_ctrl new_val = {0}, old_val = *sigp_ctrl;
+		union esca_sigp_ctrl new_val = {0}, old_val;
 
+		old_val = READ_ONCE(*sigp_ctrl);
 		new_val.scn = src_id;
 		new_val.c = 1;
 		old_val.c = 0;
@@ -93,8 +94,9 @@ static int sca_inject_ext_call(struct kvm_vcpu *vcpu, int src_id)
 		struct bsca_block *sca = vcpu->kvm->arch.sca;
 		union bsca_sigp_ctrl *sigp_ctrl =
 			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
-		union bsca_sigp_ctrl new_val = {0}, old_val = *sigp_ctrl;
+		union bsca_sigp_ctrl new_val = {0}, old_val;
 
+		old_val = READ_ONCE(*sigp_ctrl);
 		new_val.scn = src_id;
 		new_val.c = 1;
 		old_val.c = 0;
@@ -124,16 +126,18 @@ static void sca_clear_ext_call(struct kvm_vcpu *vcpu)
 		struct esca_block *sca = vcpu->kvm->arch.sca;
 		union esca_sigp_ctrl *sigp_ctrl =
 			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
-		union esca_sigp_ctrl old = *sigp_ctrl;
+		union esca_sigp_ctrl old;
 
+		old = READ_ONCE(*sigp_ctrl);
 		expect = old.value;
 		rc = cmpxchg(&sigp_ctrl->value, old.value, 0);
 	} else {
 		struct bsca_block *sca = vcpu->kvm->arch.sca;
 		union bsca_sigp_ctrl *sigp_ctrl =
 			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
-		union bsca_sigp_ctrl old = *sigp_ctrl;
+		union bsca_sigp_ctrl old;
 
+		old = READ_ONCE(*sigp_ctrl);
 		expect = old.value;
 		rc = cmpxchg(&sigp_ctrl->value, old.value, 0);
 	}
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 6/17 s390/debug: add _ASM_S390_ prefix to header guard

In reply to Sasha Levin

From: Niklas Schnelle <[email protected]>

[ Upstream commit 0d4d52361b6c29bf771acd4fa461f06d78fb2fac ]

Using DEBUG_H without a prefix is very generic and inconsistent with other header guards in arch/s390/include/asm. In fact it collides with the same name in the ath9k wireless driver though that depends on !S390 via disabled wireless support. Let's just use a consistent header guard name and prevent possible future trouble.

---
 arch/s390/include/asm/debug.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/s390/include/asm/debug.h +3 -3
index c1b82bcc017c..29a1badbe2f5 100644
@@ -4,8 +4,8 @@
  *
  *    Copyright IBM Corp. 1999, 2020
  */
-#ifndef DEBUG_H
-#define DEBUG_H
+#ifndef _ASM_S390_DEBUG_H
+#define _ASM_S390_DEBUG_H
 
 #include <linux/string.h>
 #include <linux/spinlock.h>
@@ -425,4 +425,4 @@ int debug_unregister_view(debug_info_t *id, struct debug_view *view);
 #define PRINT_FATAL(x...)	printk(KERN_DEBUG PRINTK_HEADER x)
 #endif /* DASD_DEBUG */
 
-#endif /* DEBUG_H */
+#endif /* _ASM_S390_DEBUG_H */
Signature · 1 line
2.35.1
author maintainer
#13 lore raw

PATCH 12/17 spi: spidev: remove debug messages that access spidev->spi without locking

In reply to Sasha Levin

From: Bartosz Golaszewski <[email protected]>

[ Upstream commit 6b35b173dbc1711f8d272e3f322d2ad697015919 ]

The two debug messages in spidev_open() dereference spidev->spi without taking the lock and without checking if it's not null. This can lead to a crash. Drop the messages as they're not needed - the user-space will get informed about ENOMEM with the syscall return value.

---
 drivers/spi/spidev.c | 2 --
 1 file changed, 2 deletions(-)
drivers/spi/spidev.c +0 -2
index 87c4d641cbd5..05b0585d5ced 100644
@@ -594,7 +594,6 @@ static int spidev_open(struct inode *inode, struct file *filp)
 	if (!spidev->tx_buffer) {
 		spidev->tx_buffer = kmalloc(bufsiz, GFP_KERNEL);
 		if (!spidev->tx_buffer) {
-			dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
 			status = -ENOMEM;
 			goto err_find_dev;
 		}
@@ -603,7 +602,6 @@ static int spidev_open(struct inode *inode, struct file *filp)
 	if (!spidev->rx_buffer) {
 		spidev->rx_buffer = kmalloc(bufsiz, GFP_KERNEL);
 		if (!spidev->rx_buffer) {
-			dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
 			status = -ENOMEM;
 			goto err_alloc_rx_buf;
 		}
Signature · 1 line
2.35.1
author maintainer
#18 lore raw

PATCH 17/17 lockref: stop doing cpu_relax in the cmpxchg loop

In reply to Sasha Levin

From: Mateusz Guzik <[email protected]>

[ Upstream commit f5fe24ef17b5fbe6db49534163e77499fb10ae8c ]

On the x86-64 architecture even a failing cmpxchg grants exclusive access to the cacheline, making it preferable to retry the failed op immediately instead of stalling with the pause instruction.

To illustrate the impact, below are benchmark results obtained by running various will-it-scale tests on top of the 6.2-rc3 kernel and Cascade Lake (2 sockets * 24 cores * 2 threads) CPU.

All results in ops/s. Note there is some variance in re-runs, but the code is consistently faster when contention is present.

open3 ("Same file open/close"):
proc stock no-pause

     1         805603         814942       (+%1)
     2        1054980        1054781       (-0%)
     8        1544802        1822858      (+18%)
    24        1191064        2199665      (+84%)
    48         851582        1469860      (+72%)
    96         609481        1427170     (+134%)

fstat2 ("Same file fstat"):
proc stock no-pause

     1        3013872        3047636       (+1%)
     2        4284687        4400421       (+2%)
     8        3257721        5530156      (+69%)
    24        2239819        5466127     (+144%)
    48        1701072        5256609     (+209%)
    96        1269157        6649326     (+423%)

Additionally, a kernel with a private patch to help access() scalability:
access2 ("Same file access"):

proc stock patched patched

                                         +nopause
    24        2378041        2005501      5370335  (-15% / +125%)

That is, fixing the problems in access itself *reduces* scalability after the cacheline ping-pong only happens in lockref with the pause instruction.

Note that fstat and access benchmarks are not currently integrated into will-it-scale, but interested parties can find them in pull requests to said project.

Code at hand has a rather tortured history. First modification showed up in commit d472d9d98b46 ("lockref: Relax in cmpxchg loop"), written with Itanium in mind. Later it got patched up to use an arch-dependent macro to stop doing it on s390 where it caused a significant regression. Said macro had undergone revisions and was ultimately eliminated later, going back to cpu_relax.

While I intended to only remove cpu_relax for x86-64, I got the following comment from Linus:

I would actually prefer just removing it entirely and see if somebody else hollers. You have the numbers to prove it hurts on real hardware, and I don't think we have any numbers to the contrary.

So I think it's better to trust the numbers and remove it as a failure, than say "let's just remove it on x86-64 and leave everybody else with the potentially broken code"

Additionally, Will Deacon (maintainer of the arm64 port, one of the architectures previously benchmarked):

So, from the arm64 side of the fence, I'm perfectly happy just removing the cpu_relax() calls from lockref.

As such, come back full circle in history and whack it altogether.

---
 lib/lockref.c | 1 -
 1 file changed, 1 deletion(-)
lib/lockref.c +0 -1
index 5b34bbd3eba8..81ac5f355242 100644
@@ -24,7 +24,6 @@
 		}								\
 		if (!--retry)							\
 			break;							\
-		cpu_relax();							\
 	}									\
 } while (0)
 
Signature · 1 line
2.35.1
author maintainer
#10 lore raw

PATCH 11/17 spi: spidev: fix a race condition when accessing spidev->spi

In reply to Sasha Levin

From: Bartosz Golaszewski <[email protected]>

[ Upstream commit a720416d94634068951773cb9e9d6f1b73769e5b ]

There's a spinlock in place that is taken in file_operations callbacks whenever we check if spidev->spi is still alive (not null). It's also taken when spidev->spi is set to NULL in remove().

This however doesn't protect the code against driver unbind event while one of the syscalls is still in progress. To that end we need a lock taken continuously as long as we may still access spidev->spi. As both the file ops and the remove callback are never called from interrupt context, we can replace the spinlock with a mutex.

---
 drivers/spi/spidev.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)
drivers/spi/spidev.c +18 -16
index 9c5ec99431d2..87c4d641cbd5 100644
@@ -67,7 +67,7 @@ static DECLARE_BITMAP(minors, N_SPI_MINORS);
 
 struct spidev_data {
 	dev_t			devt;
-	spinlock_t		spi_lock;
+	struct mutex		spi_lock;
 	struct spi_device	*spi;
 	struct list_head	device_entry;
 
@@ -94,9 +94,8 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
 	int status;
 	struct spi_device *spi;
 
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spi = spidev->spi;
-	spin_unlock_irq(&spidev->spi_lock);
 
 	if (spi == NULL)
 		status = -ESHUTDOWN;
@@ -106,6 +105,7 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
 	if (status == 0)
 		status = message->actual_length;
 
+	mutex_unlock(&spidev->spi_lock);
 	return status;
 }
 
@@ -358,12 +358,12 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	 * we issue this ioctl.
 	 */
 	spidev = filp->private_data;
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spi = spi_dev_get(spidev->spi);
-	spin_unlock_irq(&spidev->spi_lock);
-
-	if (spi == NULL)
+	if (spi == NULL) {
+		mutex_unlock(&spidev->spi_lock);
 		return -ESHUTDOWN;
+	}
 
 	/* use the buffer lock here for triple duty:
 	 *  - prevent I/O (from us) so calling spi_setup() is safe;
@@ -500,6 +500,7 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 
 	mutex_unlock(&spidev->buf_lock);
 	spi_dev_put(spi);
+	mutex_unlock(&spidev->spi_lock);
 	return retval;
 }
 
@@ -521,12 +522,12 @@ spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
 	 * we issue this ioctl.
 	 */
 	spidev = filp->private_data;
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spi = spi_dev_get(spidev->spi);
-	spin_unlock_irq(&spidev->spi_lock);
-
-	if (spi == NULL)
+	if (spi == NULL) {
+		mutex_unlock(&spidev->spi_lock);
 		return -ESHUTDOWN;
+	}
 
 	/* SPI_IOC_MESSAGE needs the buffer locked "normally" */
 	mutex_lock(&spidev->buf_lock);
@@ -553,6 +554,7 @@ spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
 done:
 	mutex_unlock(&spidev->buf_lock);
 	spi_dev_put(spi);
+	mutex_unlock(&spidev->spi_lock);
 	return retval;
 }
 
@@ -631,10 +633,10 @@ static int spidev_release(struct inode *inode, struct file *filp)
 	spidev = filp->private_data;
 	filp->private_data = NULL;
 
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	/* ... after we unbound from the underlying device? */
 	dofree = (spidev->spi == NULL);
-	spin_unlock_irq(&spidev->spi_lock);
+	mutex_unlock(&spidev->spi_lock);
 
 	/* last close? */
 	spidev->users--;
@@ -761,7 +763,7 @@ static int spidev_probe(struct spi_device *spi)
 
 	/* Initialize the driver data */
 	spidev->spi = spi;
-	spin_lock_init(&spidev->spi_lock);
+	mutex_init(&spidev->spi_lock);
 	mutex_init(&spidev->buf_lock);
 
 	INIT_LIST_HEAD(&spidev->device_entry);
@@ -806,9 +808,9 @@ static int spidev_remove(struct spi_device *spi)
 	/* prevent new opens */
 	mutex_lock(&device_list_lock);
 	/* make sure ops on existing fds can abort cleanly */
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spidev->spi = NULL;
-	spin_unlock_irq(&spidev->spi_lock);
+	mutex_unlock(&spidev->spi_lock);
 
 	list_del(&spidev->device_entry);
 	device_destroy(spidev_class, spidev->devt);
Signature · 1 line
2.35.1
author maintainer
#15 lore raw

PATCH 14/17 scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id

In reply to Sasha Levin

From: Yihang Li <[email protected]>

[ Upstream commit f58c89700630da6554b24fd3df293a24874c10c1 ]

Currently the driver sets the port invalid if one phy in the port is not enabled, which may cause issues in expander situation. In directly attached situation, if phy up doesn't occur in time when refreshing port id, the port is incorrectly set to invalid which will also cause disk lost.

Therefore set a port invalid only if there are no devices attached to the port.

---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/hisi_sas/hisi_sas_main.c +1 -1
index 1feca45384c7..e5b9229310a0 100644
@@ -1408,7 +1408,7 @@ static void hisi_sas_refresh_port_id(struct hisi_hba *hisi_hba)
 				device->linkrate = phy->sas_phy.linkrate;
 
 			hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
-		} else
+		} else if (!port->port_attached)
 			port->id = 0xff;
 	}
 }
Signature · 1 line
2.35.1
author maintainer
#7 lore raw

PATCH 8/17 cpufreq: armada-37xx: stop using 0 as NULL pointer

In reply to Sasha Levin

From: Miles Chen <[email protected]>

[ Upstream commit 08f0adb193c008de640fde34a2e00a666c01d77c ]

Use NULL for NULL pointer to fix the following sparse warning:
drivers/cpufreq/armada-37xx-cpufreq.c:448:32: sparse: warning: Using plain integer as NULL pointer

---
 drivers/cpufreq/armada-37xx-cpufreq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/cpufreq/armada-37xx-cpufreq.c +1 -1
index 2de7fd18f66a..f0be8a43ec49 100644
@@ -443,7 +443,7 @@ static int __init armada37xx_cpufreq_driver_init(void)
 		return -ENODEV;
 	}
 
-	clk = clk_get(cpu_dev, 0);
+	clk = clk_get(cpu_dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(cpu_dev, "Cannot get clock for CPU0\n");
 		return PTR_ERR(clk);
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/17 kcsan: test: don't put the expect array on the stack

In reply to Sasha Levin

From: Max Filippov <[email protected]>

[ Upstream commit 5b24ac2dfd3eb3e36f794af3aa7f2828b19035bd ]

Size of the 'expect' array in the __report_matches is 1536 bytes, which is exactly the default frame size warning limit of the xtensa architecture.
As a result allmodconfig xtensa kernel builds with the gcc that does not support the compiler plugins (which otherwise would push the said warning limit to 2K) fail with the following message:

kernel/kcsan/kcsan_test.c:257:1: error: the frame size of 1680 bytes
is larger than 1536 bytes

Fix it by dynamically allocating the 'expect' array.

---
 kernel/kcsan/kcsan-test.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
kernel/kcsan/kcsan-test.c +6 -1
index ebe7fd245104..8a8ccaf4f38f 100644
@@ -149,7 +149,7 @@ static bool report_matches(const struct expect_report *r)
 	const bool is_assert = (r->access[0].type | r->access[1].type) & KCSAN_ACCESS_ASSERT;
 	bool ret = false;
 	unsigned long flags;
-	typeof(observed.lines) expect;
+	typeof(*observed.lines) *expect;
 	const char *end;
 	char *cur;
 	int i;
@@ -158,6 +158,10 @@ static bool report_matches(const struct expect_report *r)
 	if (!report_available())
 		return false;
 
+	expect = kmalloc(sizeof(observed.lines), GFP_KERNEL);
+	if (WARN_ON(!expect))
+		return false;
+
 	/* Generate expected report contents. */
 
 	/* Title */
@@ -241,6 +245,7 @@ static bool report_matches(const struct expect_report *r)
 		strstr(observed.lines[2], expect[1])));
 out:
 	spin_unlock_irqrestore(&observed.lock, flags);
+	kfree(expect);
 	return ret;
 }
 
Signature · 1 line
2.35.1
author maintainer
#16 lore raw

PATCH 15/17 platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD

In reply to Sasha Levin

From: Michael Klein <[email protected]>

[ Upstream commit 36c2b9d6710427f802494ba070621cb415198293 ]

Add touchscreen info for the CSL Panther Tab HD.

---
 drivers/platform/x86/touchscreen_dmi.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
drivers/platform/x86/touchscreen_dmi.c +25 -0
index 110ff1e6ef81..bc26acace2c3 100644
@@ -255,6 +255,23 @@ static const struct ts_dmi_data connect_tablet9_data = {
 	.properties     = connect_tablet9_props,
 };
 
+static const struct property_entry csl_panther_tab_hd_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 20),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1526),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-csl-panther-tab-hd.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data csl_panther_tab_hd_data = {
+	.acpi_name      = "MSSL1680:00",
+	.properties     = csl_panther_tab_hd_props,
+};
+
 static const struct property_entry cube_iwork8_air_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
 	PROPERTY_ENTRY_U32("touchscreen-min-y", 3),
@@ -1057,6 +1074,14 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Tablet 9"),
 		},
 	},
+	{
+		/* CSL Panther Tab HD */
+		.driver_data = (void *)&csl_panther_tab_hd_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "CSL Computer GmbH & Co. KG"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CSL Panther Tab HD"),
+		},
+	},
 	{
 		/* CUBE iwork8 Air */
 		.driver_data = (void *)&cube_iwork8_air_data,
Signature · 1 line
2.35.1
author maintainer
#17 lore raw

PATCH 16/17 platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit db9494895b405bf318dc7e563dee6daa51b3b6ed ]

The 0x33 keycode is emitted by Fn + F6 on a ASUS FX705GE laptop.

---
 drivers/platform/x86/asus-nb-wmi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/platform/x86/asus-nb-wmi.c +1 -0
index 949ddeb673bc..74637bd0433e 100644
@@ -478,6 +478,7 @@ static const struct key_entry asus_nb_wmi_keymap[] = {
 	{ KE_KEY, 0x30, { KEY_VOLUMEUP } },
 	{ KE_KEY, 0x31, { KEY_VOLUMEDOWN } },
 	{ KE_KEY, 0x32, { KEY_MUTE } },
+	{ KE_KEY, 0x33, { KEY_SCREENLOCK } },
 	{ KE_KEY, 0x35, { KEY_SCREENLOCK } },
 	{ KE_KEY, 0x40, { KEY_PREVIOUSSONG } },
 	{ KE_KEY, 0x41, { KEY_NEXTSONG } },
Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 7/17 arm64/mm: Define dummy pud_user_exec() when using 2-level page-table

In reply to Sasha Levin

From: Will Deacon <[email protected]>

[ Upstream commit 4e4ff23a35ee3a145fbc8378ecfeaab2d235cddd ]

With only two levels of page-table, the generic 'pud_*' macros are implemented using dummy operations in pgtable-nopmd.h. Since commit 730a11f982e6 ("arm64/mm: add pud_user_exec() check in pud_user_accessible_page()"), pud_user_accessible_page() unconditionally calls pud_user_exec(), which is an arm64-specific helper and therefore isn't defined by pgtable-nopmd.h. This results in a build failure for configurations with only two levels of page table:

arch/arm64/include/asm/pgtable.h: In function 'pud_user_accessible_page':

Quoted 1 line
Quoted 1 line

arch/arm64/include/asm/pgtable.h:870:51: error: implicit declaration of function 'pud_user_exec'; did you mean 'pmd_user_exec'? [-Werror=implicit-function-declaration]

     870 |         return pud_leaf(pud) && (pud_user(pud) || pud_user_exec(pud));
         |                                                   ^~~~~~~~~~~~~
         |                                                   pmd_user_exec

Fix the problem by defining pud_user_exec() as pud_user() in this case.

---
 arch/arm64/include/asm/pgtable.h | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/include/asm/pgtable.h +1 -0
index 3f74db7b0a31..67f33df4006a 100644
@@ -653,6 +653,7 @@ static inline unsigned long pud_page_vaddr(pud_t pud)
 #else
 
 #define pud_page_paddr(pud)	({ BUILD_BUG(); 0; })
+#define pud_user_exec(pud)	pud_user(pud) /* Always 0 with folding */
 
 /* Match pmd_offset folding in <asm/generic/pgtable-nopmd.h> */
 #define pmd_set_fixmap(addr)		NULL
Signature · 1 line
2.35.1
maintainer
#11 lore raw

Re: [PATCH AUTOSEL 5.10 11/17] spi: spidev: fix a race condition when accessing spidev->spi

In reply to Sasha Levin
Quoted 7 lines · Sasha Levin

From: Bartosz Golaszewski <[email protected]>

[ Upstream commit a720416d94634068951773cb9e9d6f1b73769e5b ]

There's a spinlock in place that is taken in file_operations callbacks whenever we check if spidev->spi is still alive (not null). It's also taken when spidev->spi is set to NULL in remove().

There are ongoing discussions of race conditions with this commit.

author maintainer
#12 lore raw

Re: [PATCH AUTOSEL 5.10 11/17] spi: spidev: fix a race condition when accessing spidev->spi

Quoted 10 lines · Mark Brown
Quoted 7 lines · Sasha Levin

From: Bartosz Golaszewski <[email protected]>

[ Upstream commit a720416d94634068951773cb9e9d6f1b73769e5b ]

There's a spinlock in place that is taken in file_operations callbacks whenever we check if spidev->spi is still alive (not null). It's also taken when spidev->spi is set to NULL in remove().

There are ongoing discussions of race conditions with this commit.

Okay, I've dropped it. Thanks!

Signature · 2 lines
Thanks,
Sasha