Skip to contentSkip to conversation

various aarch64 fixes for running Hyper-V on TCG

PATCH Superseded Evgeny Iakovlev 2 participants 5 messages Jan 17, 2023 – Jan 19, 2023

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#4 lore raw

PATCH v2 2/2 target/arm: provide stubs for more external debug registers

In reply to Evgeny Iakovlev

Qemu doesn't implement Debug Communication Channel, as well as the rest of external debug interface. However, Microsoft Hyper-V tries to access some of these registers during an EL2 context switch.

Since there is no architectural way to not advertise support for external debug, provide RAZ/WI stubs for OSDTRRX_EL1, OSDTRTX_EL1 and OSECCR_EL1 registers in the same way the rest of external debug is currently done.

---
 target/arm/debug_helper.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
target/arm/debug_helper.c +21 -0
index 6c34c6e27d..bc213ac91e 100644
@@ -684,6 +684,27 @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
       .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 1, .opc2 = 0,
       .access = PL0_R, .accessfn = access_tda,
       .type = ARM_CP_CONST, .resetvalue = 0 },
+    /*
+     * OSDTRRX_EL1/OSDTRTX_EL1 are used for save and restore of DBGDTRRX_EL0.
+     * It is a component of the Debug Communications Channel, which is not implemented.
+     */
+    { .name = "OSDTRRX_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14,
+      .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 2,
+      .access = PL1_RW, .accessfn = access_tda,
+      .type = ARM_CP_CONST, .resetvalue = 0 },
+    { .name = "OSDTRTX_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14,
+      .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 2,
+      .access = PL1_RW, .accessfn = access_tda,
+      .type = ARM_CP_CONST, .resetvalue = 0 },
+    /*
+     * OSECCR_EL1 provides a mechanism for an operating system
+     * to access the contents of EDECCR. EDECCR is not implemented though,
+     * as is the rest of external device mechanism.
+     */
+    { .name = "OSECCR_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14,
+      .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 2,
+      .access = PL1_RW, .accessfn = access_tda,
+      .type = ARM_CP_CONST, .resetvalue = 0 },
     /*
      * DBGDSCRint[15,12,5:2] map to MDSCR_EL1[15,12,5:2].  Map all bits as
      * it is unlikely a guest will care.
Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 1/2 target/arm: implement DBGCLAIM registers

In reply to Evgeny Iakovlev

The architecture does not define any functionality for the CLAIM tag bits. So we will just keep the raw bits, as per spec.

---
 target/arm/cpu.h          |  1 +
 target/arm/debug_helper.c | 38 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+)
target/arm/cpu.h +1 -0
index 2b4bd20f9d..eddec155b0 100644
@@ -494,6 +494,7 @@ typedef struct CPUArchState {
         uint64_t dbgbcr[16]; /* breakpoint control registers */
         uint64_t dbgwvr[16]; /* watchpoint value registers */
         uint64_t dbgwcr[16]; /* watchpoint control registers */
+        uint64_t dbgclaim;   /* DBGCLAIM bits */
         uint64_t mdscr_el1;
         uint64_t oslsr_el1; /* OS Lock Status */
         uint64_t osdlr_el1; /* OS DoubleLock status */
target/arm/debug_helper.c +38 -0
index c21739242c..6c34c6e27d 100644
@@ -629,6 +629,29 @@ static void osdlr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     }
 }
 
+static void dbgclaimset_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                              uint64_t value)
+{
+    env->cp15.dbgclaim |= (value & 0xFF);
+}
+
+static uint64_t dbgclaimset_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    /* CLAIM bits are RAO */
+    return 0xFF;
+}
+
+static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                              uint64_t value)
+{
+    env->cp15.dbgclaim &= ~(value & 0xFF);
+}
+
+static void dbgclaimclr_raw_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+    env->cp15.dbgclaim = value;
+}
+
 static const ARMCPRegInfo debug_cp_reginfo[] = {
     /*
      * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped
@@ -712,6 +735,21 @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
       .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 0,
       .access = PL1_RW, .accessfn = access_tda,
       .type = ARM_CP_NOP },
+    /*
+     * Dummy DBGCLAIM registers.
+     * "The architecture does not define any functionality for the CLAIM tag bits.",
+     * so we only keep the raw bits
+     */
+    { .name = "DBGCLAIMSET_EL1", .state = ARM_CP_STATE_BOTH,
+      .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 6,
+      .type = ARM_CP_ALIAS,
+      .access = PL1_RW, .accessfn = access_tda,
+      .writefn = dbgclaimset_write, .readfn = dbgclaimset_read },
+    { .name = "DBGCLAIMCLR_EL1", .state = ARM_CP_STATE_BOTH,
+      .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 6,
+      .access = PL1_RW, .accessfn = access_tda,
+      .writefn = dbgclaimclr_write, .raw_writefn = dbgclaimclr_raw_write,
+      .fieldoffset = offsetof(CPUARMState, cp15.dbgclaim) },
 };
 
 static const ARMCPRegInfo debug_lpae_cp_reginfo[] = {
Signature · 1 line
2.34.1
#0 lore raw

v2 cover various aarch64 fixes for running Hyper-V on TCG

Small series of changes to aarch64 emulation to better support running Hyper-V as a TCG guest wtih EL3 firmware.

v2:
* DBGCLAIM now implements a (trivial) raw_write handler
* Added comments around ignored external debug registers
* Patch 3 is dropped because it was manually picked into target-arm.next

Evgeny Iakovlev (2):
target/arm: implement DBGCLAIM registers target/arm: provide stubs for more external debug registers

 target/arm/cpu.h          |  1 +
 target/arm/debug_helper.c | 59 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+)
Signature · 1 line
2.34.1
Reviewed-by on v2 1/2
#2 lore raw

Re: [PATCH v2 1/2] target/arm: implement DBGCLAIM registers

In reply to Evgeny Iakovlev

target/arm/debug_helper.c static const ARMCPRegInfo debug_cp_reginfo[] = { · line 752

Quoted 5 lines · Evgeny Iakovlev
target/arm/debug_helper.c +5 -0
+    { .name = "DBGCLAIMCLR_EL1", .state = ARM_CP_STATE_BOTH,
+      .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 6,
+      .access = PL1_RW, .accessfn = access_tda,
+      .writefn = dbgclaimclr_write, .raw_writefn = dbgclaimclr_raw_write,
+      .fieldoffset = offsetof(CPUARMState, cp15.dbgclaim) },

You didn't need a new function, just .raw_writefn = raw_write (which then uses .fieldoffset to dtrt).

Otherwise,

r~

#3 lore raw

Re: [PATCH v2 1/2] target/arm: implement DBGCLAIM registers

Quoted 10 lines · Richard Henderson
Quoted 6 lines · Evgeny Iakovlev

+    { .name = "DBGCLAIMCLR_EL1", .state = ARM_CP_STATE_BOTH, +      .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 6, +      .access = PL1_RW, .accessfn = access_tda,
+      .writefn = dbgclaimclr_write, .raw_writefn = dbgclaimclr_raw_write,
+      .fieldoffset = offsetof(CPUARMState, cp15.dbgclaim) },

You didn't need a new function, just .raw_writefn = raw_write (which then uses .fieldoffset to dtrt).

Ah, i see, okay.

Quoted 6 lines

Otherwise,

r~