leds: tps68470: LED driver for TPS68470
Subsystems (4)
cover leds: tps68470: LED driver for TPS68470
This work allows user to control the indicator and flash LEDs though sysfs in user space. TPS68470 is a part of INT3470 and provides GPIO, LED, and power controls.
To allow the user to control these two LEDs, two masks for the ILEDCTL, called TPS68470_ILEDCTL_ENA and TPS68470_ILEDCTL_ENA and a two bits mask, called TPS68470_ILEDCTL_CTRLB are defined and are used to enable/disable the LEDs and set the power status, respectively.
The LED driver called leds-tps68470 provides the sysfs interface and the register configuration implementation. For the indicator LED, only TPS68470_ILEDCTL_ENA needs to be set to turn on/off the LED. For the flash LED, TPS68470 provides 4 levels of power settings. After enabling the TPS68470_ILEDCTL_ENB, the power level should also be set. The strategy is
Brightness | Power
=======================
LED_OFF | - LED_ON | 4mA LED_HALF | 8mA LED_FULL | 16mA
Moreover, the user and application can set the brightness through sysfs, /sys/class/leds/tps68470-ileda and /sys/class/leds/tps68470-iledb
Kate Hsuan (3):
platform: x86: int3472: Add MFD cell for tps68470 LED
include: mfd: tps68470: Add masks for LEDA and LEDB
leds: tps68470: Add LED control for tps68470
drivers/leds/Kconfig | 12 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-tps68470.c | 170 ++++++++++++++++++ drivers/platform/x86/intel/int3472/tps68470.c | 3 +- include/linux/mfd/tps68470.h | 5 + 5 files changed, 190 insertions(+), 1 deletion(-) create mode 100644 drivers/leds/leds-tps68470.c
Signature · 1 line
2.39.0
PATCH 1/3 platform: x86: int3472: Add MFD cell for tps68470 LED
Add MFD cell for tps68470-led.
--- drivers/platform/x86/intel/int3472/tps68470.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/platform/x86/intel/int3472/tps68470.c +2 -1
@@ -17,7 +17,7 @@#define DESIGNED_FOR_CHROMEOS 1#define DESIGNED_FOR_WINDOWS 2 -#define TPS68470_WIN_MFD_CELL_COUNT 3 +#define TPS68470_WIN_MFD_CELL_COUNT 4static const struct mfd_cell tps68470_cros[] = { { .name ="tps68470-gpio" },
@@ -194,6 +194,7 @@ static int skl_int3472_tps68470_probe(struct i2c_client *client) cells[1 ].platform_data = (void *)board_data->tps68470_regulator_pdata; cells[1 ].pdata_size =sizeof (struct tps68470_regulator_platform_data ); cells[2 ].name ="tps68470-gpio" ; + cells[3 ].name ="tps68470-led" ;for (i =0 ; i < board_data->n_gpiod_lookups; i++)gpiod_add_lookup_table (board_data->tps68470_gpio_lookup_tables[i]);
Signature · 1 line
2.39.0
PATCH 2/3 include: mfd: tps68470: Add masks for LEDA and LEDB
In reply to Kate HsuanAdd flags for both LEDA(TPS68470_ILEDCTL_ENA), LEDB (TPS68470_ILEDCTL_ENB), and current control mask for LEDB (TPS68470_ILEDCTL_CTRLB)
--- include/linux/mfd/tps68470.h | 5 +++++ 1 file changed, 5 insertions(+)
include/linux/mfd/tps68470.h +5 -0
@@ -34,6 +34,7 @@#define TPS68470_REG_SGPO 0x22#define TPS68470_REG_GPDI 0x26#define TPS68470_REG_GPDO 0x27 +#define TPS68470_REG_ILEDCTL 0x28#define TPS68470_REG_VCMVAL 0x3C#define TPS68470_REG_VAUX1VAL 0x3D#define TPS68470_REG_VAUX2VAL 0x3E
@@ -94,4 +95,8 @@#define TPS68470_GPIO_MODE_OUT_CMOS 2#define TPS68470_GPIO_MODE_OUT_ODRAIN 3 +#define TPS68470_ILEDCTL_ENA BIT(2) +#define TPS68470_ILEDCTL_ENB BIT(6) +#define TPS68470_ILEDCTL_CTRLB GENMASK(5, 4) +#endif /* __LINUX_MFD_TPS68470_H */
Signature · 1 line
2.39.0
PATCH 3/3 leds: tps68470: Add LED control for tps68470
In reply to Kate HsuanThere are two LED controllers, LEDA indicator LED and LEDB flash LED for tps68470. LEDA can be enabled by setting TPS68470_ILEDCTL_ENA. Moreover, tps68470 provides 4 levels of power status for LEDB, so after setting TPS68470_ILEDCTL_ENB, the current status field (TPS68470_ILEDCTL_CTRLB) should also be set according to the brightness value from user space. These two LEDs can be controlled through the LED class of sysfs (tps68470-leda and tps68470-ledb).
--- drivers/leds/Kconfig | 12 +++ drivers/leds/Makefile | 1 + drivers/leds/leds-tps68470.c | 170 +++++++++++++++++++++++++++++++++++ 3 files changed, 183 insertions(+) create mode 100644 drivers/leds/leds-tps68470.c
drivers/leds/Kconfig +12 -0
@@ -846,6 +846,18 @@ config LEDS_TPS6105X It is a single boost converter primarily for white LEDs and audio amplifiers. +config LEDS_TPS68470 + tristate "LED support for TI TPS68470" + depends on LEDS_CLASS + depends on INTEL_SKL_INT3472 + help + This driver supports TPS68470 PMIC with LED chip. + It provide two LED controllers, including an indicator LED + and a flash LED. + + To compile this driver as a module, choose M and it will be + called leds-tps68470 + config LEDS_IP30 tristate "LED support for SGI Octane machines" depends on LEDS_CLASS
drivers/leds/Makefile +1 -0
@@ -86,6 +86,7 @@ obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds-turris-omnia.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o +obj-$(CONFIG_LEDS_TPS68470) += leds-tps68470.o # LED SPI Drivers obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
drivers/leds/leds-tps68470.c new file +170 -0
170 lines not on this page · raw message
Signature · 1 line
2.39.0