Skip to contentSkip to conversation

Add DFU, emmc and usb boot for TI am62x

PATCH Superseded Sjoerd Simons 3 participants 19 messages Jan 21, 2023 – Jan 27, 2023

Subsystems (4)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

cover Add DFU, emmc and usb boot for TI am62x

This series adds more boot sources for the TI am62x. For that the dts' are synced from the upstream ti-next git tree (to add usb nodes), some dwc3 glue is and finally the default configuration is tuned to add support for DFU and USB (host and gadget)

Aswath Govindraju (1):
configs: am62: Add configs for enabling USB in U-Boot

Sjoerd Simons (7):
omap: timer: add ti,am654-timer compatibility
arm: mach-k3: am62: Add timer0 id to the dev list
arm: dts: k3-am62: Bump dtsi from ti-next
arm: dts: k3-am625-sk: Enable emmc in SPL
usb: dwc3: Add dwc3 glue for am62
arm: dts: k3-am625-sk: Enable usb ports in u-boot
configs: am62x_evm_*: Enable USB and DFU support

 arch/arm/dts/k3-am62-main.dtsi       | 259 ++++++++++++++++++++++++---
 arch/arm/dts/k3-am62-mcu.dtsi        |  49 +++++
 arch/arm/dts/k3-am62-wakeup.dtsi     |   4 +-
 arch/arm/dts/k3-am625-r5-sk.dts      |   2 +-
 arch/arm/dts/k3-am625-sk-u-boot.dtsi |  39 +++-
 arch/arm/dts/k3-am625-sk.dts         |  95 +++++-----
 arch/arm/dts/k3-am625.dtsi           |  52 ++++++
 arch/arm/mach-k3/am62x/dev-data.c    |   1 +
 configs/am62x_evm_a53_defconfig      |  33 +++-
 configs/am62x_evm_r5_defconfig       |  26 ++-
 drivers/timer/omap-timer.c           |   1 +
 drivers/usb/dwc3/dwc3-generic.c      | 102 +++++++++++
 include/configs/am62x_evm.h          |  10 +-
 13 files changed, 578 insertions(+), 95 deletions(-)
Signature · 1 line
2.39.0
#1 lore raw

PATCH 1/8 omap: timer: add ti,am654-timer compatibility

THe TI AM654 timer is compatible with the omap-timer implementation, so add it to the id list

---

 drivers/timer/omap-timer.c | 1 +
 1 file changed, 1 insertion(+)
drivers/timer/omap-timer.c +1 -0
index aa2e4360c1b..9b6d97dae67 100644
@@ -114,6 +114,7 @@ static const struct udevice_id omap_timer_ids[] = {
 	{ .compatible = "ti,am335x-timer" },
 	{ .compatible = "ti,am4372-timer" },
 	{ .compatible = "ti,omap5430-timer" },
+	{ .compatible = "ti,am654-timer" },
 	{}
 };
 
Signature · 1 line
2.39.0
Reviewed-by on v1 1/8
#3 lore raw

Re: [PATCH 1/8] omap: timer: add ti,am654-timer compatibility

In reply to Sjoerd Simons
Quoted 14 lines · Sjoerd Simons

THe TI AM654 timer is compatible with the omap-timer implementation, so add it to the id list

---

 drivers/timer/omap-timer.c | 1 +
 1 file changed, 1 insertion(+)
drivers/timer/omap-timer.c +0 -0
index aa2e4360c1b..9b6d97dae67 100644

drivers/timer/omap-timer.c static const struct udevice_id omap_timer_ids[] = { · line 116

Quoted 3 lines
drivers/timer/omap-timer.c +0 -0
@@ -114,6 +114,7 @@ static const struct udevice_id omap_timer_ids[] = {
 	{ .compatible = "ti,am335x-timer" },
 	{ .compatible = "ti,am4372-timer" },
 	{ .compatible = "ti,omap5430-timer" },
Quoted 4 lines
drivers/timer/omap-timer.c +1 -0
+	{ .compatible = "ti,am654-timer" },
 	{}
 };
 
Signature · 3 lines
Best regards,
Dhruva Gole
Texas Instruments Incorporated
#4 lore raw

PATCH 2/8 arm: mach-k3: am62: Add timer0 id to the dev list

In reply to Sjoerd Simons

Timer0 is used by u-boot as the tick timer; Add it to the soc devices list so it can be enabled via the k3 power controller.

---

 arch/arm/mach-k3/am62x/dev-data.c | 1 +
 1 file changed, 1 insertion(+)
arch/arm/mach-k3/am62x/dev-data.c +1 -0
index 616d0650b9c..140dca4bd1d 100644
@@ -58,6 +58,7 @@ static struct ti_dev soc_dev_list[] = {
 	PSC_DEV(161, &soc_lpsc_list[8]),
 	PSC_DEV(162, &soc_lpsc_list[9]),
 	PSC_DEV(75, &soc_lpsc_list[10]),
+	PSC_DEV(36, &soc_lpsc_list[11]),
 	PSC_DEV(102, &soc_lpsc_list[11]),
 	PSC_DEV(146, &soc_lpsc_list[11]),
 	PSC_DEV(13, &soc_lpsc_list[12]),
Signature · 1 line
2.39.0
#6 lore raw

PATCH 3/8 arm: dts: k3-am62: Bump dtsi from ti-next

In reply to Sjoerd Simons

Update the am62 and am625 device-trees from current ti-k3-next (commit 880932e657f). This needed the following tweaks to the u-boot specific$ dtsi as well:
- Switch tick-timer to the main_timer as it's now defined in the main dtsi
- Add mdio pins to the cpsw3g pinctrl. It moved to a subnode in the linux dtsi that u-boot doesn't use/support

---

 arch/arm/dts/k3-am62-main.dtsi       | 259 ++++++++++++++++++++++++---
 arch/arm/dts/k3-am62-mcu.dtsi        |  49 +++++
 arch/arm/dts/k3-am62-wakeup.dtsi     |   4 +-
 arch/arm/dts/k3-am625-r5-sk.dts      |   2 +-
 arch/arm/dts/k3-am625-sk-u-boot.dtsi |   8 +-
 arch/arm/dts/k3-am625-sk.dts         |  95 +++++-----
 arch/arm/dts/k3-am625.dtsi           |  52 ++++++
 7 files changed, 381 insertions(+), 88 deletions(-)
arch/arm/dts/k3-am62-main.dtsi +231 -28
index 4a42f1b2e31..ea683fd77d6 100644
@@ -54,6 +54,12 @@
 			reg = <0x4044 0x8>;
 			#phy-cells = <1>;
 		};
+
+		epwm_tbclk: clock@4130 {
+			compatible = "ti,am62-epwm-tbclk", "syscon";
+			reg = <0x4130 0x4>;
+			#clock-cells = <1>;
+		};
 	};
 
 	dmss: bus@48000000 {
@@ -144,8 +150,8 @@
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 		mbox-names = "rx", "tx";
-		mboxes= <&secure_proxy_main 12>,
-			<&secure_proxy_main 13>;
+		mboxes = <&secure_proxy_main 12>,
+			 <&secure_proxy_main 13>;
 		reg-names = "debug_messages";
 		reg = <0x00 0x44043000 0x00 0xfe0>;
 
@@ -186,6 +192,102 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 2>;
+		assigned-clock-parents = <&k3_clks 37 3>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 2>;
+		assigned-clock-parents = <&k3_clks 38 3>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 2>;
+		assigned-clock-parents = <&k3_clks 39 3>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 2>;
+		assigned-clock-parents = <&k3_clks 40 3>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 2>;
+		assigned-clock-parents = <&k3_clks 41 3>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 2>;
+		assigned-clock-parents = <&k3_clks 42 3>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 2>;
+		assigned-clock-parents = <&k3_clks 43 3>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,am64-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x100>;
@@ -193,6 +295,7 @@
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -202,6 +305,7 @@
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 152 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -211,6 +315,7 @@
 		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 153 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -220,6 +325,7 @@
 		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 154 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -229,6 +335,7 @@
 		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 155 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -238,6 +345,7 @@
 		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 156 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -247,6 +355,7 @@
 		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 158 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_i2c0: i2c@20000000 {
@@ -258,6 +367,7 @@
 		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 102 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@20010000 {
@@ -269,6 +379,7 @@
 		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 103 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@20020000 {
@@ -280,6 +391,7 @@
 		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 104 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@20030000 {
@@ -291,6 +403,7 @@
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 105 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_spi0: spi@20100000 {
@@ -300,7 +413,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 172 0>;
+		clocks = <&k3_clks 141 0>;
+		status = "disabled";
 	};
 
 	main_spi1: spi@20110000 {
@@ -310,7 +424,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 173 0>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
 	};
 
 	main_spi2: spi@20120000 {
@@ -320,7 +435,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 174 0>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
 	};
 
 	main_gpio_intr: interrupt-controller@a00000 {
@@ -385,8 +501,11 @@
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-mmc-hs = <0x0>;
-		ti,otap-del-sel-ddr52 = <0x9>;
-		ti,otap-del-sel-hs200 = <0x6>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@fa00000 {
@@ -397,19 +516,20 @@
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
 		ti,trm-icp = <0x2>;
-		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-legacy = <0x8>;
 		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0xf>;
-		ti,otap-del-sel-sdr25 = <0xf>;
-		ti,otap-del-sel-sdr50 = <0xc>;
-		ti,otap-del-sel-sdr104 = <0x6>;
-		ti,otap-del-sel-ddr50 = <0x9>;
-		ti,itap-del-sel-legacy = <0x0>;
-		ti,itap-del-sel-sd-hs = <0x0>;
-		ti,itap-del-sel-sdr12 = <0x0>;
-		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x4>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0x1>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
 		ti,clkbuf-sel = <0x7>;
 		bus-width = <4>;
+		status = "disabled";
 	};
 
 	sdhci2: mmc@fa20000 {
@@ -420,18 +540,65 @@
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
 		ti,trm-icp = <0x2>;
-		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-legacy = <0x8>;
 		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0xf>;
-		ti,otap-del-sel-sdr25 = <0xf>;
-		ti,otap-del-sel-sdr50 = <0xc>;
-		ti,otap-del-sel-sdr104 = <0x6>;
-		ti,otap-del-sel-ddr50 = <0x9>;
-		ti,itap-del-sel-legacy = <0x0>;
-		ti,itap-del-sel-sd-hs = <0x0>;
-		ti,itap-del-sel-sdr12 = <0x0>;
-		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x8>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0xa>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
 		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
+	};
+
+	usbss0: dwc3-usb@f900000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f900000 0x00 0x800>;
+		clocks = <&k3_clks 161 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb0: usb@31000000 {
+			compatible = "snps,dwc3";
+			reg =<0x00 0x31000000 0x00 0x50000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	usbss1: dwc3-usb@f910000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f910000 0x00 0x800>;
+		clocks = <&k3_clks 162 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31100000 {
+			compatible = "snps,dwc3";
+			reg =<0x00 0x31100000 0x00 0x50000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
 	};
 
 	fss: bus@fc00000 {
@@ -456,6 +623,7 @@
 			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 	};
 
@@ -514,12 +682,13 @@
 			clocks = <&k3_clks 13 0>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 
 		cpts@3d000 {
 			compatible = "ti,j721e-cpts";
 			reg = <0x00 0x3d000 0x00 0x400>;
-			clocks = <&k3_clks 13 1>;
+			clocks = <&k3_clks 13 3>;
 			clock-names = "cpts";
 			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "cpts";
@@ -551,6 +720,7 @@
 		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 51 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap1: pwm@23110000 {
@@ -560,6 +730,7 @@
 		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 52 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap2: pwm@23120000 {
@@ -569,6 +740,7 @@
 		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 53 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_mcan0: can@20701000 {
@@ -583,5 +755,36 @@
 			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23000000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23010000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23020000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 };
arch/arm/dts/k3-am62-mcu.dtsi +49 -0

79 lines not on this page · raw message

arch/arm/dts/k3-am62-wakeup.dtsi +3 -1
index 4090134676c..38dced6b4fe 100644
@@ -26,16 +26,18 @@
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 114 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@2b200000 {
 		compatible = "ti,am64-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02b200000 0x00 0x100>;
+		reg = <0x00 0x2b200000 0x00 0x100>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 107 4>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 };
arch/arm/dts/k3-am625-r5-sk.dts +1 -1
index d39b334ed03..4019ec3b3eb 100644
@@ -20,7 +20,7 @@
 
 	chosen {
 		stdout-path = "serial2:115200n8";
-		tick-timer = &timer1;
+		tick-timer = &main_timer0;
 	};
 
 	memory@80000000 {
arch/arm/dts/k3-am625-sk-u-boot.dtsi +3 -5
index f275e3b46ca..37458737d76 100644
@@ -7,7 +7,7 @@
 / {
 	chosen {
 		stdout-path = "serial2:115200n8";
-		tick-timer = &timer1;
+		tick-timer = &main_timer0;
 	};
 
 	aliases {
@@ -22,10 +22,7 @@
 &cbass_main{
 	u-boot,dm-spl;
 
-	timer1: timer@2400000 {
-		compatible = "ti,omap5430-timer";
-		reg = <0x00 0x2400000 0x00 0x80>;
-		ti,timer-alwon;
+	timer@2400000 {
 		clock-frequency = <25000000>;
 		u-boot,dm-spl;
 	};
@@ -133,6 +130,7 @@
 	reg-names = "cpsw_nuss", "mac_efuse";
 	/delete-property/ ranges;
 	u-boot,dm-spl;
+	pinctrl-0 = <&main_mdio1_pins_default &main_rgmii1_pins_default>;
 
 	cpsw-phy-sel@04044 {
 		compatible = "ti,am64-phy-gmii-sel";
arch/arm/dts/k3-am625-sk.dts +42 -53

179 lines not on this page · raw message

arch/arm/dts/k3-am625.dtsi +52 -0

81 lines not on this page · raw message

Signature · 1 line
2.39.0
#7 lore raw

Re: [PATCH 3/8] arm: dts: k3-am62: Bump dtsi from ti-next

Quoted 8 lines · Sjoerd Simons

Update the am62 and am625 device-trees from current ti-k3-next (commit 880932e657f). This needed the following tweaks to the u-boot specific$ dtsi as well:
- Switch tick-timer to the main_timer as it's now defined in the main dtsi
- Add mdio pins to the cpsw3g pinctrl. It moved to a subnode in the linux dtsi that u-boot doesn't use/support

These need to come from linux-next or similar, not a TI tree. What's the status on upstreaming those changes?

Signature · 1 line
Tom
#8 lore raw

Re: [PATCH 3/8] arm: dts: k3-am62: Bump dtsi from ti-next

Quoted 3 lines · Tom Rini
Quoted 1 line · Sjoerd Simons

Update the am62 and am625 device-trees from current ti-k3-next

...

Quoted 3 lines

These need to come from linux-next or similar, not a TI tree. What's the
status on upstreaming those changes?

With ti-k3-next i was referring to:

https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git/log/?h=ti-k3-next

Which is a maintainer branch that flows into the ti tree that gets pulled into linux next.. Just checked this morning and the relevant commit is now available in linux-next as well (it wasn't just yet when i sent this out).

Would you like me to resend this series with the body of this patch updated to reflect that ?

Signature · 2 lines
Sjoerd Simons
Collabora Ltd.
#9 lore raw

Re: [PATCH 3/8] arm: dts: k3-am62: Bump dtsi from ti-next

Quoted 15 lines · Sjoerd Simons
Quoted 3 lines · Tom Rini
Quoted 1 line · Sjoerd Simons

Update the am62 and am625 device-trees from current ti-k3-next

...

Quoted 3 lines

These need to come from linux-next or similar, not a TI tree. What's the
status on upstreaming those changes?

With ti-k3-next i was referring to:

https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git/log/?h=ti-k3-next

Quoted 8 lines

Which is a maintainer branch that flows into the ti tree that gets pulled into linux next.. Just checked this morning and the relevant commit is now available in linux-next as well (it wasn't just yet when i sent this out).

Would you like me to resend this series with the body of this patch updated to reflect that ?

Thanks for clarifying, both of you. For this go-round it's fine, just please rephrase things for future series.

Signature · 1 line
Tom
#10 lore raw

PATCH 4/8 arm: dts: k3-am625-sk: Enable emmc in SPL

In reply to Sjoerd Simons

sdhci0 on the k3-am625-sk is the emmc, enable this in SPL as well to allow booting from that media.

---

 arch/arm/dts/k3-am625-sk-u-boot.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/dts/k3-am625-sk-u-boot.dtsi +8 -0
index 37458737d76..32163e5373a 100644
@@ -92,6 +92,14 @@
 	u-boot,dm-spl;
 };
 
+&sdhci0 {
+	u-boot,dm-spl;
+};
+
+&main_mmc0_pins_default {
+	u-boot,dm-spl;
+};
+
 &sdhci1 {
 	u-boot,dm-spl;
 };
Signature · 1 line
2.39.0
#11 lore raw

Re: [PATCH 4/8] arm: dts: k3-am625-sk: Enable emmc in SPL

Quoted 4 lines · Sjoerd Simons

sdhci0 on the k3-am625-sk is the emmc, enable this in SPL as well to allow booting from that media.

Applied to u-boot/master, thanks!

Signature · 1 line
Tom
Reviewed-by on v1 4/8
#12 lore raw

Re: [PATCH 4/8] arm: dts: k3-am625-sk: Enable emmc in SPL

In reply to Sjoerd Simons
Quoted 18 lines · Sjoerd Simons

sdhci0 on the k3-am625-sk is the emmc, enable this in SPL as well to allow booting from that media.

---

 arch/arm/dts/k3-am625-sk-u-boot.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/dts/k3-am625-sk-u-boot.dtsi +1 -0
index 37458737d76..32163e5373a 100644
@@ -92,6 +92,14 @@
 	u-boot,dm-spl;
 };
 
+&sdhci0 {

arch/arm/dts/k3-am625-sk-u-boot.dtsi line 105

Quoted 10 lines
arch/arm/dts/k3-am625-sk-u-boot.dtsi +7 -0
+	u-boot,dm-spl;
+};
+
+&main_mmc0_pins_default {
+	u-boot,dm-spl;
+};
+
 &sdhci1 {
 	u-boot,dm-spl;
 };

I mis-typed when I said I had applied this already and was intending to say:

Signature · 1 line
Tom
#13 lore raw

PATCH 5/8 usb: dwc3: Add dwc3 glue for am62

In reply to Sjoerd Simons

Add glue code for TI AM62 to the dwc3 driver; Most code adopted from TI vendor u-boot code.

---

 drivers/usb/dwc3/dwc3-generic.c | 102 ++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)
drivers/usb/dwc3/dwc3-generic.c +102 -0
index 78966718d01..cab7b2e928d 100644
@@ -11,6 +11,7 @@
 #include <cpu_func.h>
 #include <log.h>
 #include <dm.h>
+#include <dm/device_compat.h>
 #include <dm/device-internal.h>
 #include <dm/lists.h>
 #include <dwc3-uboot.h>
@@ -23,7 +24,9 @@
 #include <usb.h>
 #include "core.h"
 #include "gadget.h"
+#include <regmap.h>
 #include <reset.h>
+#include <syscon.h>
 #include <clk.h>
 #include <usb/xhci.h>
 #include <asm/gpio.h>
@@ -398,6 +401,104 @@ struct dwc3_glue_ops ti_ops = {
 	.glue_configure = dwc3_ti_glue_configure,
 };
 
+void dwc3_ti_am62_glue_configure(struct udevice *dev, int index,
+				 enum usb_dr_mode mode)
+{
+#define USBSS_MODE_CONTROL		0x1c
+#define USBSS_PHY_CONFIG		0x8
+#define USBSS_PHY_VBUS_SEL_MASK		GENMASK(2, 1)
+#define USBSS_PHY_VBUS_SEL_SHIFT	1
+#define USBSS_MODE_VALID	BIT(0)
+#define PHY_PLL_REFCLK_MASK	GENMASK(3, 0)
+static const int dwc3_ti_am62_rate_table[] = {	/* in KHZ */
+	9600,
+	10000,
+	12000,
+	19200,
+	20000,
+	24000,
+	25000,
+	26000,
+	38400,
+	40000,
+	58000,
+	50000,
+	52000,
+};
+
+	struct clk usb2_refclk;
+	int rate_code, i, ret;
+	unsigned long rate;
+	u32 reg;
+	void *usbss;
+	bool vbus_divider;
+	struct regmap *syscon;
+	struct ofnode_phandle_args args;
+
+	usbss = dev_remap_addr_index(dev, 0);
+	if (IS_ERR(usbss)) {
+		dev_err(dev, "can't map IOMEM resource\n");
+		return;
+	}
+
+	ret = clk_get_by_name(dev, "ref", &usb2_refclk);
+	if (ret) {
+		dev_err(dev, "can't get usb2_refclk\n");
+		return;
+	}
+
+	/* Calcuate the rate code */
+	rate = clk_get_rate(&usb2_refclk);
+	rate /= 1000;	/* To KHz */
+	for (i = 0; i < ARRAY_SIZE(dwc3_ti_am62_rate_table); i++) {
+		if (dwc3_ti_am62_rate_table[i] == rate)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(dwc3_ti_am62_rate_table)) {
+		dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
+		return;
+	}
+
+	rate_code = i;
+
+	/* Read the syscon property */
+	syscon = syscon_regmap_lookup_by_phandle(dev, "ti,syscon-phy-pll-refclk");
+	if (IS_ERR(syscon)) {
+		dev_err(dev, "unable to get ti,syscon-phy-pll-refclk regmap\n");
+		return;
+	}
+
+	ret = ofnode_parse_phandle_with_args(dev_ofnode(dev), "ti,syscon-phy-pll-refclk", NULL, 1,
+					     0, &args);
+	if (ret)
+		return;
+
+	/* Program PHY PLL refclk by reading syscon property */
+	ret = regmap_update_bits(syscon, args.args[0], PHY_PLL_REFCLK_MASK, rate_code);
+	if (ret) {
+		dev_err(dev, "failed to set phy pll reference clock rate\n");
+		return;
+	}
+
+	/* VBUS divider select */
+	reg = readl(usbss + USBSS_PHY_CONFIG);
+	vbus_divider = dev_read_bool(dev, "ti,vbus-divider");
+	if (vbus_divider)
+		reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT;
+
+	writel(reg, usbss + USBSS_PHY_CONFIG);
+
+	/* Set mode valid */
+	reg = readl(usbss + USBSS_MODE_CONTROL);
+	reg |= USBSS_MODE_VALID;
+	writel(reg, usbss + USBSS_MODE_CONTROL);
+}
+
+struct dwc3_glue_ops ti_am62_ops = {
+	.glue_configure = dwc3_ti_am62_glue_configure,
+};
+
 static int dwc3_glue_bind(struct udevice *parent)
 {
 	ofnode node;
@@ -570,6 +671,7 @@ static const struct udevice_id dwc3_glue_ids[] = {
 	{ .compatible = "ti,keystone-dwc3"},
 	{ .compatible = "ti,dwc3", .data = (ulong)&ti_ops },
 	{ .compatible = "ti,am437x-dwc3", .data = (ulong)&ti_ops },
+	{ .compatible = "ti,am62-usb", .data = (ulong)&ti_am62_ops },
 	{ .compatible = "ti,am654-dwc3" },
 	{ .compatible = "rockchip,rk3328-dwc3" },
 	{ .compatible = "rockchip,rk3399-dwc3" },
Signature · 1 line
2.39.0
#14 lore raw

Re: [PATCH 5/8] usb: dwc3: Add dwc3 glue for am62

Quoted 4 lines · Sjoerd Simons

Add glue code for TI AM62 to the dwc3 driver; Most code adopted from TI vendor u-boot code.

After talking with Marek, this should be reworked to go on top of:
https://patchwork.ozlabs.org/project/uboot/list/?series=337977&state=*
which itself does need a v2, instead of this approach.

Quoted 140 lines

---

 drivers/usb/dwc3/dwc3-generic.c | 102 ++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)
drivers/usb/dwc3/dwc3-generic.c +102 -0
index 78966718d01..cab7b2e928d 100644
@@ -11,6 +11,7 @@
 #include <cpu_func.h>
 #include <log.h>
 #include <dm.h>
+#include <dm/device_compat.h>
 #include <dm/device-internal.h>
 #include <dm/lists.h>
 #include <dwc3-uboot.h>
@@ -23,7 +24,9 @@
 #include <usb.h>
 #include "core.h"
 #include "gadget.h"
+#include <regmap.h>
 #include <reset.h>
+#include <syscon.h>
 #include <clk.h>
 #include <usb/xhci.h>
 #include <asm/gpio.h>
@@ -398,6 +401,104 @@ struct dwc3_glue_ops ti_ops = {
 	.glue_configure = dwc3_ti_glue_configure,
 };
 
+void dwc3_ti_am62_glue_configure(struct udevice *dev, int index,
+				 enum usb_dr_mode mode)
+{
+#define USBSS_MODE_CONTROL		0x1c
+#define USBSS_PHY_CONFIG		0x8
+#define USBSS_PHY_VBUS_SEL_MASK		GENMASK(2, 1)
+#define USBSS_PHY_VBUS_SEL_SHIFT	1
+#define USBSS_MODE_VALID	BIT(0)
+#define PHY_PLL_REFCLK_MASK	GENMASK(3, 0)
+static const int dwc3_ti_am62_rate_table[] = {	/* in KHZ */
+	9600,
+	10000,
+	12000,
+	19200,
+	20000,
+	24000,
+	25000,
+	26000,
+	38400,
+	40000,
+	58000,
+	50000,
+	52000,
+};
+
+	struct clk usb2_refclk;
+	int rate_code, i, ret;
+	unsigned long rate;
+	u32 reg;
+	void *usbss;
+	bool vbus_divider;
+	struct regmap *syscon;
+	struct ofnode_phandle_args args;
+
+	usbss = dev_remap_addr_index(dev, 0);
+	if (IS_ERR(usbss)) {
+		dev_err(dev, "can't map IOMEM resource\n");
+		return;
+	}
+
+	ret = clk_get_by_name(dev, "ref", &usb2_refclk);
+	if (ret) {
+		dev_err(dev, "can't get usb2_refclk\n");
+		return;
+	}
+
+	/* Calcuate the rate code */
+	rate = clk_get_rate(&usb2_refclk);
+	rate /= 1000;	/* To KHz */
+	for (i = 0; i < ARRAY_SIZE(dwc3_ti_am62_rate_table); i++) {
+		if (dwc3_ti_am62_rate_table[i] == rate)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(dwc3_ti_am62_rate_table)) {
+		dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
+		return;
+	}
+
+	rate_code = i;
+
+	/* Read the syscon property */
+	syscon = syscon_regmap_lookup_by_phandle(dev, "ti,syscon-phy-pll-refclk");
+	if (IS_ERR(syscon)) {
+		dev_err(dev, "unable to get ti,syscon-phy-pll-refclk regmap\n");
+		return;
+	}
+
+	ret = ofnode_parse_phandle_with_args(dev_ofnode(dev), "ti,syscon-phy-pll-refclk", NULL, 1,
+					     0, &args);
+	if (ret)
+		return;
+
+	/* Program PHY PLL refclk by reading syscon property */
+	ret = regmap_update_bits(syscon, args.args[0], PHY_PLL_REFCLK_MASK, rate_code);
+	if (ret) {
+		dev_err(dev, "failed to set phy pll reference clock rate\n");
+		return;
+	}
+
+	/* VBUS divider select */
+	reg = readl(usbss + USBSS_PHY_CONFIG);
+	vbus_divider = dev_read_bool(dev, "ti,vbus-divider");
+	if (vbus_divider)
+		reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT;
+
+	writel(reg, usbss + USBSS_PHY_CONFIG);
+
+	/* Set mode valid */
+	reg = readl(usbss + USBSS_MODE_CONTROL);
+	reg |= USBSS_MODE_VALID;
+	writel(reg, usbss + USBSS_MODE_CONTROL);
+}
+
+struct dwc3_glue_ops ti_am62_ops = {
+	.glue_configure = dwc3_ti_am62_glue_configure,
+};
+
 static int dwc3_glue_bind(struct udevice *parent)
 {
 	ofnode node;
@@ -570,6 +671,7 @@ static const struct udevice_id dwc3_glue_ids[] = {
 	{ .compatible = "ti,keystone-dwc3"},
 	{ .compatible = "ti,dwc3", .data = (ulong)&ti_ops },
 	{ .compatible = "ti,am437x-dwc3", .data = (ulong)&ti_ops },
+	{ .compatible = "ti,am62-usb", .data = (ulong)&ti_am62_ops },
 	{ .compatible = "ti,am654-dwc3" },
 	{ .compatible = "rockchip,rk3328-dwc3" },
 	{ .compatible = "rockchip,rk3399-dwc3" },
Signature · 1 line
Tom
#15 lore raw

PATCH 6/8 configs: am62: Add configs for enabling USB in U-Boot

In reply to Sjoerd Simons

From: Aswath Govindraju <[email protected]>

Add configs for enabling USB host MSC and USB DFU in U-Boot.

[ rebase from vendor u-boot to upstream ]

---

 include/configs/am62x_evm.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
include/configs/am62x_evm.h +9 -1
index 7fbefdece40..580ff390f6e 100644
@@ -11,6 +11,7 @@
 
 #include <config_distro_bootcmd.h>
 #include <environment/ti/mmc.h>
+#include <environment/ti/k3_dfu.h>
 
 /* DDR Configuration */
 #define CFG_SYS_SDRAM_BASE1		0x880000000
@@ -77,13 +78,20 @@
 		"${bootdir}/${name_fit}\0"				\
 	"partitions=" PARTS_DEFAULT
 
+#define EXTRA_ENV_DFUARGS \
+	DFU_ALT_INFO_MMC \
+	DFU_ALT_INFO_EMMC \
+	DFU_ALT_INFO_RAM \
+	DFU_ALT_INFO_OSPI
+
 /* Incorporate settings into the U-Boot environment */
 #define CFG_EXTRA_ENV_SETTINGS					\
 	DEFAULT_LINUX_BOOT_ENV						\
 	DEFAULT_MMC_TI_ARGS						\
 	EXTRA_ENV_AM625_BOARD_SETTINGS					\
 	EXTRA_ENV_AM625_BOARD_SETTINGS_MMC				\
-	BOOTENV
+	BOOTENV								\
+	EXTRA_ENV_DFUARGS
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>
Signature · 1 line
2.39.0
#16 lore raw

PATCH 7/8 arm: dts: k3-am625-sk: Enable usb ports in u-boot

In reply to Sjoerd Simons

Enable both usb0 as a peripheral for use with DFU and usb1 as a host port for usage with e.g. usb storage.

---

 arch/arm/dts/k3-am625-sk-u-boot.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
arch/arm/dts/k3-am625-sk-u-boot.dtsi +23 -0
index 32163e5373a..5a5b539f97a 100644
@@ -154,3 +154,26 @@
 &cpsw_port2 {
 	status = "disabled";
 };
+
+&usbss0 {
+	u-boot,dm-spl;
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	/* Since role switching is not supported in U-Boot */
+	/delete-property/ extcon;
+	u-boot,dm-spl;
+};
+
+&usbss1 {
+	u-boot,dm-spl;
+};
+
+&usb1 {
+	u-boot,dm-spl;
+};
+
+&main_usb1_pins_default {
+	u-boot,dm-spl;
+};
Signature · 1 line
2.39.0
#18 lore raw

PATCH 8/8 configs: am62x_evm_*: Enable USB and DFU support

In reply to Sjoerd Simons

Enable USB host as well as USB gadget and DFU support; This allows using a single set binaries to load both the u-boot chain and linux from USB DFU, SD card and emmc.

---

 configs/am62x_evm_a53_defconfig | 33 ++++++++++++++++++++++++++++++---
 configs/am62x_evm_r5_defconfig  | 26 +++++++++++++++++++++++---
 2 files changed, 53 insertions(+), 6 deletions(-)
configs/am62x_evm_a53_defconfig +30 -3
index 273db2edbfb..5a650d21f32 100644
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_K3=y
+CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
@@ -7,6 +8,8 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_SOC_K3_AM625=y
 CONFIG_K3_ATF_LOAD_ADDR=0x9e780000
 CONFIG_TARGET_AM625_A53_EVM=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="k3-am625-sk"
 CONFIG_SPL_TEXT_BASE=0x80080000
@@ -18,8 +21,6 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
@@ -32,17 +33,23 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
+CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
 CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_CMD_DFU=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_MULTI_DTB_FIT=y
@@ -53,10 +60,17 @@ CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_REGMAP=y
 CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
+CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
@@ -97,5 +111,18 @@ CONFIG_CADENCE_QSPI=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_TI_SCI=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_SPL_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
 CONFIG_OF_LIBFDT_OVERLAY=y
configs/am62x_evm_r5_defconfig +23 -3
index 7350882a36f..3ac54e50472 100644
@@ -7,6 +7,8 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SOC_K3_AM625=y
 CONFIG_TARGET_AM625_R5_EVM=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7000ffff
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
@@ -21,8 +23,6 @@ CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7000ffff
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
 CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
@@ -41,6 +41,7 @@ CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
+CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
@@ -52,6 +53,8 @@ CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
@@ -71,17 +74,20 @@ CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_REGMAP=y
 CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_SPL_CLK_CCF=y
 CONFIG_SPL_CLK_K3_PLL=y
 CONFIG_SPL_CLK_K3=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
 CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_DA8XX_GPIO=y
 CONFIG_DM_MAILBOX=y
 CONFIG_K3_SEC_PROXY=y
-CONFIG_SPL_MISC=y
+CONFIG_MISC=y
 CONFIG_ESM_K3=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ADMA=y
@@ -117,5 +123,19 @@ CONFIG_CADENCE_QSPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_SPL_USB_DWC3_GENERIC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_LIB_RATIONAL=y
 CONFIG_SPL_LIB_RATIONAL=y
Signature · 1 line
2.39.0