Skip to contentSkip to conversation

kbuild: do not put .scmversion into the source tarball

PATCH In review Masahiro Yamada 4 participants 18 messages Jan 22, 2023 – Feb 5, 2023 Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH 1/7 kbuild: do not put .scmversion into the source tarball

.scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE.

In fact, deb-pkg does not rely on it any more because the generated debian/rules specifies KERNELRELEASE from the command line.

Do likwise for (src)rpm-pkg, and remove this feature.

---

 scripts/Makefile.package |  6 ++----
 scripts/package/mkspec   |  6 +++---
 scripts/setlocalversion  | 19 +------------------
 3 files changed, 6 insertions(+), 25 deletions(-)
scripts/Makefile.package +2 -4
index 525a2820976f..e84c4e8ceb8e 100644
@@ -32,7 +32,7 @@ export KDEB_SOURCENAME
 TAR_CONTENT := Documentation LICENSES arch block certs crypto drivers fs \
                include init io_uring ipc kernel lib mm net rust \
                samples scripts security sound tools usr virt \
-               .config .scmversion Makefile \
+               .config Makefile \
                Kbuild Kconfig COPYING $(wildcard localversion*)
 MKSPEC     := $(srctree)/scripts/package/mkspec
 
@@ -47,10 +47,8 @@ if test "$(objtree)" != "$(srctree)"; then \
 	echo >&2; \
 	false; \
 fi ; \
-$(srctree)/scripts/setlocalversion --save-scmversion; \
 tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \
-	--transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \
-rm -f $(objtree)/.scmversion
+	--transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3)
 
 # rpm-pkg
 # ---------------------------------------------------------------------------
scripts/package/mkspec +3 -3
index adab28fa7f89..d3c6701b7769 100755
@@ -90,7 +90,7 @@ $S	rm -f scripts/basic/fixdep scripts/kconfig/conf
 $S	rm -f tools/objtool/{fixdep,objtool}
 $S
 $S	%build
-$S	$MAKE %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release}
+$S	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} KBUILD_BUILD_VERSION=%{release}
 $S
 	%install
 	mkdir -p %{buildroot}/boot
@@ -101,8 +101,8 @@ $S
 	%else
 	cp \$($MAKE -s image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE
 	%endif
-$M	$MAKE %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} modules_install
-	$MAKE %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
+$M	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_MOD_PATH=%{buildroot} modules_install
+	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
 	cp System.map %{buildroot}/boot/System.map-$KERNELRELEASE
 	cp .config %{buildroot}/boot/config-$KERNELRELEASE
 $S$M	rm -f %{buildroot}/lib/modules/$KERNELRELEASE/build
scripts/setlocalversion +1 -18
index af4754a35e66..3b31702b4a4a 100755
@@ -11,16 +11,11 @@
 #
 
 usage() {
-	echo "Usage: $0 [--save-scmversion] [srctree]" >&2
+	echo "Usage: $0 [srctree]" >&2
 	exit 1
 }
 
-scm_only=false
 srctree=.
-if test "$1" = "--save-scmversion"; then
-	scm_only=true
-	shift
-fi
 if test $# -gt 0; then
 	srctree=$1
 	shift
@@ -35,10 +30,6 @@ scm_version()
 	short=false
 
 	cd "$srctree"
-	if test -e .scmversion; then
-		cat .scmversion
-		return
-	fi
 	if test "$1" = "--short"; then
 		short=true
 	fi
@@ -103,14 +94,6 @@ collect_files()
 	echo "$res"
 }
 
-if $scm_only; then
-	if test ! -e .scmversion; then
-		res=$(scm_version)
-		echo "$res" >.scmversion
-	fi
-	exit
-fi
-
 if ! test -e include/config/auto.conf; then
 	echo "Error: kernelrelease not valid - run 'make prepare' to update it" >&2
 	exit 1
Signature · 1 line
2.34.1
#1 lore raw

PATCH 2/7 setlocalversion: simplify the construction of the short version

With the --short option given, scm_version() prints "+". Just append it.

---

 scripts/setlocalversion | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
scripts/setlocalversion +1 -2
index 3b31702b4a4a..5cdf409204aa 100755
@@ -121,8 +121,7 @@ elif [ "${LOCALVERSION+set}" != "set" ]; then
 	#
 	# If the variable LOCALVERSION is set (including being set
 	# to an empty string), we don't want to append a plus sign.
-	scm=$(scm_version --short)
-	res="$res${scm:++}"
+	res="$res$(scm_version --short)"
 fi
 
 echo "$res"
Signature · 1 line
2.34.1
Reviewed-by on v1 2/7
#2 lore raw

Re: [PATCH 2/7] setlocalversion: simplify the construction of the short version

Quoted 25 lines · Masahiro Yamada

With the --short option given, scm_version() prints "+". Just append it.

---

 scripts/setlocalversion | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
scripts/setlocalversion +1 -2
index 3b31702b4a4a..5cdf409204aa 100755
@@ -121,8 +121,7 @@ elif [ "${LOCALVERSION+set}" != "set" ]; then
 	#
 	# If the variable LOCALVERSION is set (including being set
 	# to an empty string), we don't want to append a plus sign.
-	scm=$(scm_version --short)
-	res="$res${scm:++}"
+	res="$res$(scm_version --short)"
 fi
 
 echo "$res"
Signature · 1 line
2.34.1
#3 lore raw

PATCH 3/7 setlocalversion: make indentation shallower

In reply to Masahiro Yamada

Return earlier if we are not in the correct git repository. This makes the code more readable.

---

 scripts/setlocalversion | 79 +++++++++++++++++++++--------------------
 1 file changed, 41 insertions(+), 38 deletions(-)
scripts/setlocalversion +41 -38
index 5cdf409204aa..b8e1018d611e 100755
@@ -34,46 +34,49 @@ scm_version()
 		short=true
 	fi
 
-	# Check for git and a git repo.
-	if test -z "$(git rev-parse --show-cdup 2>/dev/null)" &&
-	   head=$(git rev-parse --verify HEAD 2>/dev/null); then
-
-		# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore
-		# it, because this version is defined in the top level Makefile.
-		if [ -z "$(git describe --exact-match 2>/dev/null)" ]; then
-
-			# If only the short version is requested, don't bother
-			# running further git commands
-			if $short; then
-				echo "+"
-				return
-			fi
-			# If we are past a tagged commit (like
-			# "v2.6.30-rc5-302-g72357d5"), we pretty print it.
-			if atag="$(git describe 2>/dev/null)"; then
-				echo "$atag" | awk -F- '{printf("-%05d", $(NF-1))}'
-			fi
-
-			# Add -g and exactly 12 hex chars.
-			printf '%s%s' -g "$(echo $head | cut -c1-12)"
-		fi
+	if test -n "$(git rev-parse --show-cdup 2>/dev/null)"; then
+		return
+	fi
+
+	if ! head=$(git rev-parse --verify HEAD 2>/dev/null); then
+		return
+	fi
+
+	# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it
+	# because this version is defined in the top level Makefile.
+	if [ -z "$(git describe --exact-match 2>/dev/null)" ]; then
 
-		# Check for uncommitted changes.
-		# This script must avoid any write attempt to the source tree,
-		# which might be read-only.
-		# You cannot use 'git describe --dirty' because it tries to
-		# create .git/index.lock .
-		# First, with git-status, but --no-optional-locks is only
-		# supported in git >= 2.14, so fall back to git-diff-index if
-		# it fails. Note that git-diff-index does not refresh the
-		# index, so it may give misleading results. See
-		# git-update-index(1), git-diff-index(1), and git-status(1).
-		if {
-			git --no-optional-locks status -uno --porcelain 2>/dev/null ||
-			git diff-index --name-only HEAD
-		} | read dummy; then
-			printf '%s' -dirty
+		# If only the short version is requested, don't bother
+		# running further git commands
+		if $short; then
+			echo "+"
+			return
 		fi
+		# If we are past a tagged commit (like
+		# "v2.6.30-rc5-302-g72357d5"), we pretty print it.
+		if atag="$(git describe 2>/dev/null)"; then
+			echo "$atag" | awk -F- '{printf("-%05d", $(NF-1))}'
+		fi
+
+		# Add -g and exactly 12 hex chars.
+		printf '%s%s' -g "$(echo $head | cut -c1-12)"
+	fi
+
+	# Check for uncommitted changes.
+	# This script must avoid any write attempt to the source tree, which
+	# might be read-only.
+	# You cannot use 'git describe --dirty' because it tries to create
+	# .git/index.lock .
+	# First, with git-status, but --no-optional-locks is only supported in
+	# git >= 2.14, so fall back to git-diff-index if it fails. Note that
+	# git-diff-index does not refresh the index, so it may give misleading
+	# results.
+	# See git-update-index(1), git-diff-index(1), and git-status(1).
+	if {
+		git --no-optional-locks status -uno --porcelain 2>/dev/null ||
+		git diff-index --name-only HEAD
+	} | read dummy; then
+		printf '%s' -dirty
 	fi
 }
 
Signature · 1 line
2.34.1
Reviewed-by on v1 3/7
#4 lore raw

Re: [PATCH 3/7] setlocalversion: make indentation shallower

Quoted 103 lines · Masahiro Yamada

Return earlier if we are not in the correct git repository. This makes the code more readable.

---

 scripts/setlocalversion | 79 +++++++++++++++++++++--------------------
 1 file changed, 41 insertions(+), 38 deletions(-)
scripts/setlocalversion +41 -38
index 5cdf409204aa..b8e1018d611e 100755
@@ -34,46 +34,49 @@ scm_version()
 		short=true
 	fi
 
-	# Check for git and a git repo.
-	if test -z "$(git rev-parse --show-cdup 2>/dev/null)" &&
-	   head=$(git rev-parse --verify HEAD 2>/dev/null); then
-
-		# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore
-		# it, because this version is defined in the top level Makefile.
-		if [ -z "$(git describe --exact-match 2>/dev/null)" ]; then
-
-			# If only the short version is requested, don't bother
-			# running further git commands
-			if $short; then
-				echo "+"
-				return
-			fi
-			# If we are past a tagged commit (like
-			# "v2.6.30-rc5-302-g72357d5"), we pretty print it.
-			if atag="$(git describe 2>/dev/null)"; then
-				echo "$atag" | awk -F- '{printf("-%05d", $(NF-1))}'
-			fi
-
-			# Add -g and exactly 12 hex chars.
-			printf '%s%s' -g "$(echo $head | cut -c1-12)"
-		fi
+	if test -n "$(git rev-parse --show-cdup 2>/dev/null)"; then
+		return
+	fi
+
+	if ! head=$(git rev-parse --verify HEAD 2>/dev/null); then
+		return
+	fi
+
+	# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it
+	# because this version is defined in the top level Makefile.
+	if [ -z "$(git describe --exact-match 2>/dev/null)" ]; then
 
-		# Check for uncommitted changes.
-		# This script must avoid any write attempt to the source tree,
-		# which might be read-only.
-		# You cannot use 'git describe --dirty' because it tries to
-		# create .git/index.lock .
-		# First, with git-status, but --no-optional-locks is only
-		# supported in git >= 2.14, so fall back to git-diff-index if
-		# it fails. Note that git-diff-index does not refresh the
-		# index, so it may give misleading results. See
-		# git-update-index(1), git-diff-index(1), and git-status(1).
-		if {
-			git --no-optional-locks status -uno --porcelain 2>/dev/null ||
-			git diff-index --name-only HEAD
-		} | read dummy; then
-			printf '%s' -dirty
+		# If only the short version is requested, don't bother
+		# running further git commands
+		if $short; then
+			echo "+"
+			return
 		fi
+		# If we are past a tagged commit (like
+		# "v2.6.30-rc5-302-g72357d5"), we pretty print it.
+		if atag="$(git describe 2>/dev/null)"; then
+			echo "$atag" | awk -F- '{printf("-%05d", $(NF-1))}'
+		fi
+
+		# Add -g and exactly 12 hex chars.
+		printf '%s%s' -g "$(echo $head | cut -c1-12)"
+	fi
+
+	# Check for uncommitted changes.
+	# This script must avoid any write attempt to the source tree, which
+	# might be read-only.
+	# You cannot use 'git describe --dirty' because it tries to create
+	# .git/index.lock .
+	# First, with git-status, but --no-optional-locks is only supported in
+	# git >= 2.14, so fall back to git-diff-index if it fails. Note that
+	# git-diff-index does not refresh the index, so it may give misleading
+	# results.
+	# See git-update-index(1), git-diff-index(1), and git-status(1).
+	if {
+		git --no-optional-locks status -uno --porcelain 2>/dev/null ||
+		git diff-index --name-only HEAD
+	} | read dummy; then
+		printf '%s' -dirty
 	fi
 }
 
Signature · 1 line
2.34.1
#5 lore raw

PATCH 4/7 setlocalversion: use only the correct release tag for git-describe

In reply to Masahiro Yamada

Currently, setlocalversion uses any annotated tag for git-describe. If we are at a tagged commit, it will not append the commit hash.

  $ git checkout v6.2-rc1^
  $ make -s defconfig prepare
  $ make kernelrelease
  6.1.0-14595-g292a089d78d3
  $ git tag -a foo -m foo
  $ make kernelrelease
  6.1.0

If a local tag 'foo' exists, it pretends to be a released version '6.1.0', while there are many commits on top of it.

The output should be consistent irrespective of such a local tag. Pass the correct release tag to --match option of git-describe.

In the mainline kernel, the SUBLEVEL is always '0' but it is omitted from the tag.

  version         tag
  6.1.0      ->   v6.1        (mainline)
  6.2.0-rc5  ->   v6.2-rc5    (mainline, release candidate)
  6.1.7      ->   v6.1.7      (stable)

---

 scripts/setlocalversion | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)
scripts/setlocalversion +17 -6
index b8e1018d611e..a4c9a61b0665 100755
@@ -27,6 +27,7 @@ fi
 scm_version()
 {
 	local short
+	local tag
 	short=false
 
 	cd "$srctree"
@@ -42,9 +43,14 @@ scm_version()
 		return
 	fi
 
-	# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it
-	# because this version is defined in the top level Makefile.
-	if [ -z "$(git describe --exact-match 2>/dev/null)" ]; then
+	# convert the version to a tag
+	#   mainline kernel:  6.2.0-rc5  ->  v6.2-rc5
+	#   stable kernel:    6.1.7      ->  v6.1.7
+	tag=v$(echo "${KERNELVERSION}" | sed 's/^\(.*\..*\)\.0\(.*\)$/\1\2/')
+
+	# If we are at a tagged commit and the tag matches the version defined
+	# in the top level Makefile, we ignore it.
+	if [ -z "$(git describe --exact-match --match=$tag 2>/dev/null)" ]; then
 
 		# If only the short version is requested, don't bother
 		# running further git commands
@@ -52,9 +58,9 @@ scm_version()
 			echo "+"
 			return
 		fi
-		# If we are past a tagged commit (like
-		# "v2.6.30-rc5-302-g72357d5"), we pretty print it.
-		if atag="$(git describe 2>/dev/null)"; then
+		# If we are past the release tag, we pretty print it.
+		# (like 6.1.0-14595-g292a089d78d3)
+		if atag="$(git describe --match=$tag 2>/dev/null)"; then
 			echo "$atag" | awk -F- '{printf("-%05d", $(NF-1))}'
 		fi
 
@@ -102,6 +108,11 @@ if ! test -e include/config/auto.conf; then
 	exit 1
 fi
 
+if [ -z "${KERNELVERSION}" ]; then
+	echo "KERNELVERSION is not set" >&2
+	exit 1
+fi
+
 # localversion* files in the build and source directory
 res="$(collect_files localversion*)"
 if test ! "$srctree" -ef .; then
Signature · 1 line
2.34.1
#6 lore raw

Re: [PATCH 4/7] setlocalversion: use only the correct release tag for git-describe

Quoted 21 lines · Masahiro Yamada

Currently, setlocalversion uses any annotated tag for git-describe. If we are at a tagged commit, it will not append the commit hash.

  $ git checkout v6.2-rc1^
  $ make -s defconfig prepare
  $ make kernelrelease
  6.1.0-14595-g292a089d78d3
  $ git tag -a foo -m foo
  $ make kernelrelease
  6.1.0

If a local tag 'foo' exists, it pretends to be a released version '6.1.0', while there are many commits on top of it.

The output should be consistent irrespective of such a local tag. Pass the correct release tag to --match option of git-describe.

In the mainline kernel, the SUBLEVEL is always '0' but it is omitted from the tag.

Quoted 6 lines
  version         tag
  6.1.0      ->   v6.1        (mainline)
  6.2.0-rc5  ->   v6.2-rc5    (mainline, release candidate)
  6.1.7      ->   v6.1.7      (stable)

I will drop this patch,
and send an alternative one.

Signature · 2 lines
Best Regards
Masahiro Yamada
#7 lore raw

PATCH 5/7 setlocalversion: absorb $(KERNELVERSION)

In reply to Masahiro Yamada

Print $(KERNELVERSION) in setlocalversion so that the callers get simpler.

---

 Makefile                | 5 ++---
 scripts/setlocalversion | 4 +++-
 2 files changed, 5 insertions(+), 4 deletions(-)
Makefile +2 -3
index ed3294c7be97..d0a95277f08a 100644
@@ -1247,8 +1247,7 @@ vmlinux: vmlinux.o $(KBUILD_LDS) modpost
 # make sure no implicit rule kicks in
 $(sort $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)): . ;
 
-filechk_kernel.release = \
-	echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+filechk_kernel.release = $(srctree)/scripts/setlocalversion $(srctree)
 
 # Store (new) KERNELRELEASE string in include/config/kernel.release
 include/config/kernel.release: FORCE
@@ -2112,7 +2111,7 @@ checkstack:
 	$(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
 
 kernelrelease:
-	@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+	@$(srctree)/scripts/setlocalversion $(srctree)
 
 kernelversion:
 	@echo $(KERNELVERSION)
scripts/setlocalversion +3 -1
index a4c9a61b0665..7c7cbefa5aa4 100755
@@ -113,8 +113,10 @@ if [ -z "${KERNELVERSION}" ]; then
 	exit 1
 fi
 
+res="${KERNELVERSION}"
+
 # localversion* files in the build and source directory
-res="$(collect_files localversion*)"
+res="${res}$(collect_files localversion*)"
 if test ! "$srctree" -ef .; then
 	res="$res$(collect_files "$srctree"/localversion*)"
 fi
Signature · 1 line
2.34.1
#8 lore raw

PATCH 6/7 setlocalversion: print ${KERNELRELEASE} if set

In reply to Masahiro Yamada

When KERNELRELEASE is overridden, include/config/kernel.release still stores the string would be returned by the script if KERNELRELEASE had not been overridden. This is not strange.

include/config/kernel.release should store KERNELRELEASE that was used for building the kernel.

---

 scripts/setlocalversion | 5 +++++
 1 file changed, 5 insertions(+)
scripts/setlocalversion +5 -0
index 7c7cbefa5aa4..eff8cc831571 100755
@@ -103,6 +103,11 @@ collect_files()
 	echo "$res"
 }
 
+if [ -n "${KERNELRELEASE}" ]; then
+	echo "${KERNELRELEASE}"
+	exit 0
+fi
+
 if ! test -e include/config/auto.conf; then
 	echo "Error: kernelrelease not valid - run 'make prepare' to update it" >&2
 	exit 1
Signature · 1 line
2.34.1
#9 lore raw

Re: [PATCH 6/7] setlocalversion: print ${KERNELRELEASE} if set

Quoted 9 lines · Masahiro Yamada

When KERNELRELEASE is overridden, include/config/kernel.release still stores the string would be returned by the script if KERNELRELEASE had not been overridden. This is not strange.

include/config/kernel.release should store KERNELRELEASE that was used for building the kernel.

I will drop this patch because a regression was reported.

https://lore.kernel.org/linux-kbuild/CAK7LNATc_aPxiYXabzYbGXOMUW0Rcf0KQi6GBPvoy71uPuqKPg@mail.gmail.com/T/#m514a0303841590f48f0446b70f56986b9f1402cc

Quoted 24 lines

---

 scripts/setlocalversion | 5 +++++
 1 file changed, 5 insertions(+)
scripts/setlocalversion +5 -1
index 7c7cbefa5aa4..eff8cc831571 100755
@@ -103,6 +103,11 @@ collect_files()
        echo "$res"
 }
 
+if [ -n "${KERNELRELEASE}" ]; then
+       echo "${KERNELRELEASE}"
+       exit 0
+fi
+
 if ! test -e include/config/auto.conf; then
        echo "Error: kernelrelease not valid - run 'make prepare' to update it" >&2
        exit 1
--

2.34.1

Signature · 2 lines
Best Regards
Masahiro Yamada
#10 lore raw

PATCH 7/7 kbuild: do not re-run setlocalversion for kernelrelease

In reply to Masahiro Yamada

Revert:
- 7b8ea53d7f18 ("makefile: not need to regenerate kernel.release file when make kernelrelease")

- 01ab17887f4c ("Makefile: "make kernelrelease" should show the correct full kernel version")

I think the original behavior was better - 'make kernelrelease' should print $(KERNELRELEASE) used in the last build, not the one that will be used in the next build. Therefore, it is an error if you run it in the pristine source tree.

---

 Makefile | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
Makefile +5 -5
index d0a95277f08a..de402d415d5f 100644
@@ -281,13 +281,13 @@ clean-targets := %clean mrproper cleandocs
 no-dot-config-targets := $(clean-targets) \
 			 cscope gtags TAGS tags help% %docs check% coccicheck \
 			 $(version_h) headers headers_% archheaders archscripts \
-			 %asm-generic kernelversion %src-pkg dt_binding_check \
+			 %asm-generic kernelrelease kernelversion %src-pkg dt_binding_check \
 			 outputmakefile rustavailable rustfmt rustfmtcheck
 # Installation targets should not require compiler. Unfortunately, vdso_install
 # is an exception where build artifacts may be updated. This must be fixed.
 no-compiler-targets := $(no-dot-config-targets) install dtbs_install \
-			headers_install modules_install kernelrelease image_name
-no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease \
+			headers_install modules_install image_name
+no-sync-config-targets := $(no-dot-config-targets) %install \
 			  image_name
 single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.rsi %.s %.symtypes %/
 
@@ -1677,7 +1677,7 @@ help:
 	@echo  '  tags/TAGS	  - Generate tags file for editors'
 	@echo  '  cscope	  - Generate cscope index'
 	@echo  '  gtags           - Generate GNU GLOBAL index'
-	@echo  '  kernelrelease	  - Output the release version string (use with make -s)'
+	@echo  '  kernelrelease	  - Output the release version string used in the last build (use with make -s)'
 	@echo  '  kernelversion	  - Output the version stored in Makefile (use with make -s)'
 	@echo  '  image_name	  - Output the image name (use with make -s)'
 	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
@@ -2111,7 +2111,7 @@ checkstack:
 	$(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
 
 kernelrelease:
-	@$(srctree)/scripts/setlocalversion $(srctree)
+	@echo $(or $(KERNELRELEASE),$(error kernelrelease not valid - run 'make prepare' to update it))
 
 kernelversion:
 	@echo $(KERNELVERSION)
Signature · 1 line
2.34.1
#11 lore raw

Re: [PATCH 7/7] kbuild: do not re-run setlocalversion for kernelrelease

Quoted 8 lines · Masahiro Yamada

Revert:
- 7b8ea53d7f18 ("makefile: not need to regenerate kernel.release file when make kernelrelease")

- 01ab17887f4c ("Makefile: "make kernelrelease" should show the correct full kernel version")

Quoted 6 lines

I think the original behavior was better - 'make kernelrelease' should print $(KERNELRELEASE) used in the last build, not the one that will be used in the next build. Therefore, it is an error if you run it in the pristine source tree.

I locally got a question about this, and
on second thought, this might be annoying because you need to build something to get kernelrelease.

I will drop this commit.

--
Best Regards
Masahiro Yamada

#12 lore raw
In reply to Masahiro Yamada
Quoted 7 lines · Masahiro Yamada

.scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE.

In fact, deb-pkg does not rely on it any more because the generated debian/rules specifies KERNELRELEASE from the command line.

Do likwise for (src)rpm-pkg, and remove this feature.

Quoted 7 lines

---

 scripts/Makefile.package |  6 ++----
 scripts/package/mkspec   |  6 +++---
 scripts/setlocalversion  | 19 +------------------
 3 files changed, 6 insertions(+), 25 deletions(-)

Hi Masahiro,

I've been observing some strange behaviour when doing incremental builds on recent linux-next versions. What happens is that the kernel version doesn't get updated as I switch branches.

For instance I was rebuilding in a kernel tree which I hadn't touched in a very long while and rebased on a recent linux-next. The kernel version then stayed at the prior version rather than being updated to reflect the actual state of the working tree.

Reverting all of the seven patches in this series fixes the issue, but I don't really have a clue where exactly it fails. Do you have any ideas how to fix this?

Thanks,
Thierry

Quoted 101 lines
scripts/Makefile.package +2 -4
index 525a2820976f..e84c4e8ceb8e 100644
@@ -32,7 +32,7 @@ export KDEB_SOURCENAME
 TAR_CONTENT := Documentation LICENSES arch block certs crypto drivers fs \
                include init io_uring ipc kernel lib mm net rust \
                samples scripts security sound tools usr virt \
-               .config .scmversion Makefile \
+               .config Makefile \
                Kbuild Kconfig COPYING $(wildcard localversion*)
 MKSPEC     := $(srctree)/scripts/package/mkspec
 
@@ -47,10 +47,8 @@ if test "$(objtree)" != "$(srctree)"; then \
 	echo >&2; \
 	false; \
 fi ; \
-$(srctree)/scripts/setlocalversion --save-scmversion; \
 tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \
-	--transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \
-rm -f $(objtree)/.scmversion
+	--transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3)
 
 # rpm-pkg
 # ---------------------------------------------------------------------------
scripts/package/mkspec +3 -3
index adab28fa7f89..d3c6701b7769 100755
@@ -90,7 +90,7 @@ $S	rm -f scripts/basic/fixdep scripts/kconfig/conf
 $S	rm -f tools/objtool/{fixdep,objtool}
 $S
 $S	%build
-$S	$MAKE %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release}
+$S	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} KBUILD_BUILD_VERSION=%{release}
 $S
 	%install
 	mkdir -p %{buildroot}/boot
@@ -101,8 +101,8 @@ $S
 	%else
 	cp \$($MAKE -s image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE
 	%endif
-$M	$MAKE %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} modules_install
-	$MAKE %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
+$M	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_MOD_PATH=%{buildroot} modules_install
+	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
 	cp System.map %{buildroot}/boot/System.map-$KERNELRELEASE
 	cp .config %{buildroot}/boot/config-$KERNELRELEASE
 $S$M	rm -f %{buildroot}/lib/modules/$KERNELRELEASE/build
scripts/setlocalversion +1 -18
index af4754a35e66..3b31702b4a4a 100755
@@ -11,16 +11,11 @@
 #
 
 usage() {
-	echo "Usage: $0 [--save-scmversion] [srctree]" >&2
+	echo "Usage: $0 [srctree]" >&2
 	exit 1
 }
 
-scm_only=false
 srctree=.
-if test "$1" = "--save-scmversion"; then
-	scm_only=true
-	shift
-fi
 if test $# -gt 0; then
 	srctree=$1
 	shift
@@ -35,10 +30,6 @@ scm_version()
 	short=false
 
 	cd "$srctree"
-	if test -e .scmversion; then
-		cat .scmversion
-		return
-	fi
 	if test "$1" = "--short"; then
 		short=true
 	fi
@@ -103,14 +94,6 @@ collect_files()
 	echo "$res"
 }
 
-if $scm_only; then
-	if test ! -e .scmversion; then
-		res=$(scm_version)
-		echo "$res" >.scmversion
-	fi
-	exit
-fi
-
 if ! test -e include/config/auto.conf; then
 	echo "Error: kernelrelease not valid - run 'make prepare' to update it" >&2
 	exit 1
Signature · 1 line
2.34.1
#13 lore raw
Quoted 23 lines · Thierry Reding
Quoted 7 lines · Masahiro Yamada

.scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE.

In fact, deb-pkg does not rely on it any more because the generated debian/rules specifies KERNELRELEASE from the command line.

Do likwise for (src)rpm-pkg, and remove this feature.

Quoted 7 lines

---

 scripts/Makefile.package |  6 ++----
 scripts/package/mkspec   |  6 +++---
 scripts/setlocalversion  | 19 +------------------
 3 files changed, 6 insertions(+), 25 deletions(-)

Hi Masahiro,

I've been observing some strange behaviour when doing incremental builds on recent linux-next versions. What happens is that the kernel version doesn't get updated as I switch branches.

Quoted 8 lines

For instance I was rebuilding in a kernel tree which I hadn't touched in a very long while and rebased on a recent linux-next. The kernel version then stayed at the prior version rather than being updated to reflect the actual state of the working tree.

Reverting all of the seven patches in this series fixes the issue, but I don't really have a clue where exactly it fails. Do you have any ideas how to fix this?

Thanks for the report.

"setlocalversion: print ${KERNELRELEASE} if set" is bad.

I will fix it.

Best Regards
Masahiro Yamada

#14 lore raw
In reply to Masahiro Yamada

Hi Masahiro,

Quoted 115 lines · Masahiro Yamada

.scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE.

In fact, deb-pkg does not rely on it any more because the generated debian/rules specifies KERNELRELEASE from the command line.

Do likwise for (src)rpm-pkg, and remove this feature.

---

 scripts/Makefile.package |  6 ++----
 scripts/package/mkspec   |  6 +++---
 scripts/setlocalversion  | 19 +------------------
 3 files changed, 6 insertions(+), 25 deletions(-)
scripts/Makefile.package +2 -4
index 525a2820976f..e84c4e8ceb8e 100644
@@ -32,7 +32,7 @@ export KDEB_SOURCENAME
 TAR_CONTENT := Documentation LICENSES arch block certs crypto drivers fs \
                include init io_uring ipc kernel lib mm net rust \
                samples scripts security sound tools usr virt \
-               .config .scmversion Makefile \
+               .config Makefile \
                Kbuild Kconfig COPYING $(wildcard localversion*)
 MKSPEC     := $(srctree)/scripts/package/mkspec
 
@@ -47,10 +47,8 @@ if test "$(objtree)" != "$(srctree)"; then \
 	echo >&2; \
 	false; \
 fi ; \
-$(srctree)/scripts/setlocalversion --save-scmversion; \
 tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \
-	--transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \
-rm -f $(objtree)/.scmversion
+	--transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3)
 
 # rpm-pkg
 # ---------------------------------------------------------------------------
scripts/package/mkspec +3 -3
index adab28fa7f89..d3c6701b7769 100755
@@ -90,7 +90,7 @@ $S	rm -f scripts/basic/fixdep scripts/kconfig/conf
 $S	rm -f tools/objtool/{fixdep,objtool}
 $S
 $S	%build
-$S	$MAKE %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release}
+$S	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} KBUILD_BUILD_VERSION=%{release}
 $S
 	%install
 	mkdir -p %{buildroot}/boot
@@ -101,8 +101,8 @@ $S
 	%else
 	cp \$($MAKE -s image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE
 	%endif
-$M	$MAKE %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} modules_install
-	$MAKE %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
+$M	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_MOD_PATH=%{buildroot} modules_install
+	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
 	cp System.map %{buildroot}/boot/System.map-$KERNELRELEASE
 	cp .config %{buildroot}/boot/config-$KERNELRELEASE
 $S$M	rm -f %{buildroot}/lib/modules/$KERNELRELEASE/build
scripts/setlocalversion +1 -18
index af4754a35e66..3b31702b4a4a 100755
@@ -11,16 +11,11 @@
 #
 
 usage() {
-	echo "Usage: $0 [--save-scmversion] [srctree]" >&2
+	echo "Usage: $0 [srctree]" >&2
 	exit 1
 }
 
-scm_only=false
 srctree=.
-if test "$1" = "--save-scmversion"; then
-	scm_only=true
-	shift
-fi
 if test $# -gt 0; then
 	srctree=$1
 	shift
@@ -35,10 +30,6 @@ scm_version()
 	short=false
 
 	cd "$srctree"
-	if test -e .scmversion; then
-		cat .scmversion
-		return
-	fi
 	if test "$1" = "--short"; then
 		short=true
 	fi
@@ -103,14 +94,6 @@ collect_files()
 	echo "$res"
 }
 
-if $scm_only; then
-	if test ! -e .scmversion; then
-		res=$(scm_version)
-		echo "$res" >.scmversion
-	fi
-	exit
-fi
-
 if ! test -e include/config/auto.conf; then
 	echo "Error: kernelrelease not valid - run 'make prepare' to update it" >&2
 	exit 1
Signature · 1 line
2.34.1

I believe this patch causes issues with binrpm-pkg (I have not done a full bisect, as I am not fully online today; the source path has been replaced with $PWD):

$ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- RPMOPTS="--define '_topdir $PWD/rpmbuild'" olddefconfig binrpm-pkg
...
Building target platforms: aarch64-linux
Building for target aarch64-linux
warning: line 23: It's not recommended to have unversioned Obsoletes: Obsoletes: kernel-headers
error: cannot open Packages database in /var/lib/rpm
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.targJq
+ umask 022
+ cd .
+ /usr/bin/rm -rf $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64
+ /usr/bin/mkdir -p $PWD/rpmbuild/BUILDROOT
+ /usr/bin/mkdir $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64
+ mkdir -p $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/boot
++ make -f ./Makefile -s image_name
+ cp arch/arm64/boot/Image.gz $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/boot/vmlinuz-6.2.0-rc5-next-20230127+
+ make -f ./Makefile -j128 KERNELRELEASE=6.2.0_rc5_next_20230127+ INSTALL_MOD_PATH=$PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64 modules_install
make[3]: warning: -j128 forced in submake: resetting jobserver mode.
+ make -f ./Makefile -j128 KERNELRELEASE=6.2.0_rc5_next_20230127+ INSTALL_HDR_PATH=$PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/usr headers_install
make[3]: warning: -j128 forced in submake: resetting jobserver mode.
+ cp System.map $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/boot/System.map-6.2.0-rc5-next-20230127+
+ cp .config $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/boot/config-6.2.0-rc5-next-20230127+
+ /usr/lib/rpm/brp-compress
Processing files: kernel-6.2.0_rc5_next_20230127+-1.aarch64
error: File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+
warning: File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+/build
warning: File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+/source

RPM build warnings:

    line 23: It's not recommended to have unversioned Obsoletes: Obsoletes: kernel-headers
    File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+/build
    File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+/source

RPM build errors:
cannot open Packages database in /var/lib/rpm
File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+
...

Cheers,
Nathan

#15 lore raw
Quoted 115 lines · Nathan Chancellor

Hi Masahiro,

Quoted 111 lines · Masahiro Yamada

.scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE.

In fact, deb-pkg does not rely on it any more because the generated debian/rules specifies KERNELRELEASE from the command line.

Do likwise for (src)rpm-pkg, and remove this feature.

---

 scripts/Makefile.package |  6 ++----
 scripts/package/mkspec   |  6 +++---
 scripts/setlocalversion  | 19 +------------------
 3 files changed, 6 insertions(+), 25 deletions(-)
scripts/Makefile.package +2 -4
index 525a2820976f..e84c4e8ceb8e 100644
@@ -32,7 +32,7 @@ export KDEB_SOURCENAME
 TAR_CONTENT := Documentation LICENSES arch block certs crypto drivers fs \
                include init io_uring ipc kernel lib mm net rust \
                samples scripts security sound tools usr virt \
-               .config .scmversion Makefile \
+               .config Makefile \
                Kbuild Kconfig COPYING $(wildcard localversion*)
 MKSPEC     := $(srctree)/scripts/package/mkspec
 
@@ -47,10 +47,8 @@ if test "$(objtree)" != "$(srctree)"; then \
      echo >&2; \
      false; \
 fi ; \
-$(srctree)/scripts/setlocalversion --save-scmversion; \
 tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \
-     --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \
-rm -f $(objtree)/.scmversion
+     --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3)
 
 # rpm-pkg
 # ---------------------------------------------------------------------------
scripts/package/mkspec +3 -3
index adab28fa7f89..d3c6701b7769 100755
@@ -90,7 +90,7 @@ $S  rm -f scripts/basic/fixdep scripts/kconfig/conf
 $S   rm -f tools/objtool/{fixdep,objtool}
 $S
 $S   %build
-$S   $MAKE %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release}
+$S   $MAKE %{?_smp_mflags} KERNELRELEASE=%{version} KBUILD_BUILD_VERSION=%{release}
 $S
      %install
      mkdir -p %{buildroot}/boot
@@ -101,8 +101,8 @@ $S
      %else
      cp \$($MAKE -s image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE
      %endif
-$M   $MAKE %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} modules_install
-     $MAKE %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
+$M   $MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_MOD_PATH=%{buildroot} modules_install
+     $MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
      cp System.map %{buildroot}/boot/System.map-$KERNELRELEASE
      cp .config %{buildroot}/boot/config-$KERNELRELEASE
 $S$M rm -f %{buildroot}/lib/modules/$KERNELRELEASE/build
scripts/setlocalversion +1 -18
index af4754a35e66..3b31702b4a4a 100755
@@ -11,16 +11,11 @@
 #
 
 usage() {
-     echo "Usage: $0 [--save-scmversion] [srctree]" >&2
+     echo "Usage: $0 [srctree]" >&2
      exit 1
 }
 
-scm_only=false
 srctree=.
-if test "$1" = "--save-scmversion"; then
-     scm_only=true
-     shift
-fi
 if test $# -gt 0; then
      srctree=$1
      shift
@@ -35,10 +30,6 @@ scm_version()
      short=false
 
      cd "$srctree"
-     if test -e .scmversion; then
-             cat .scmversion
-             return
-     fi
      if test "$1" = "--short"; then
              short=true
      fi
@@ -103,14 +94,6 @@ collect_files()
      echo "$res"
 }
 
-if $scm_only; then
-     if test ! -e .scmversion; then
-             res=$(scm_version)
-             echo "$res" >.scmversion
-     fi
-     exit
-fi
-
 if ! test -e include/config/auto.conf; then
      echo "Error: kernelrelease not valid - run 'make prepare' to update it" >&2
Quoted 8 lines
Quoted 4 lines
scripts/setlocalversion +0 -1
      exit 1
--

2.34.1

I believe this patch causes issues with binrpm-pkg (I have not done a full bisect, as I am not fully online today; the source path has been replaced with $PWD):

Thanks for the report.

%{version} contains underscores instead of hyphens. So, it does not match to ${KERNELRELEASE} used during the build.

I will squash the following:

scripts/package/mkspec +0 -1
index a73d25c76efe..cd4026208100 100755
@@ -90,7 +90,7 @@ $S    rm -f scripts/basic/fixdep scripts/kconfig/conf
 $S     rm -f tools/objtool/{fixdep,objtool}
 $S
 $S     %build
-$S     $MAKE %{?_smp_mflags} KERNELRELEASE=%{version}

KBUILD_BUILD_VERSION=%{release}
+$S $MAKE %{?_smp_mflags} KERNELRELEASE=$KERNELRELEASE
KBUILD_BUILD_VERSION=%{release}
$S
%install
mkdir -p %{buildroot}/boot
@@ -101,8 +101,8 @@ $S

        %else
        cp \$($MAKE -s image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE
        %endif

-$M $MAKE %{?_smp_mflags} KERNELRELEASE=%{version}
INSTALL_MOD_PATH=%{buildroot} modules_install
- $MAKE %{?_smp_mflags} KERNELRELEASE=%{version}
INSTALL_HDR_PATH=%{buildroot}/usr headers_install
+$M $MAKE %{?_smp_mflags} KERNELRELEASE=$KERNELRELEASE
INSTALL_MOD_PATH=%{buildroot} modules_install
+ $MAKE %{?_smp_mflags} KERNELRELEASE=$KERNELRELEASE
INSTALL_HDR_PATH=%{buildroot}/usr headers_install
cp System.map %{buildroot}/boot/System.map-$KERNELRELEASE cp .config %{buildroot}/boot/config-$KERNELRELEASE
$S$M rm -f %{buildroot}/lib/modules/$KERNELRELEASE/build

Quoted 40 lines
$ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- RPMOPTS="--define '_topdir $PWD/rpmbuild'" olddefconfig binrpm-pkg
...
Building target platforms: aarch64-linux
Building for target aarch64-linux
warning: line 23: It's not recommended to have unversioned Obsoletes: Obsoletes: kernel-headers
error: cannot open Packages database in /var/lib/rpm
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.targJq
+ umask 022
+ cd .
+ /usr/bin/rm -rf $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64
+ /usr/bin/mkdir -p $PWD/rpmbuild/BUILDROOT
+ /usr/bin/mkdir $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64
+ mkdir -p $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/boot
++ make -f ./Makefile -s image_name
+ cp arch/arm64/boot/Image.gz $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/boot/vmlinuz-6.2.0-rc5-next-20230127+
+ make -f ./Makefile -j128 KERNELRELEASE=6.2.0_rc5_next_20230127+ INSTALL_MOD_PATH=$PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64 modules_install
make[3]: warning: -j128 forced in submake: resetting jobserver mode.
+ make -f ./Makefile -j128 KERNELRELEASE=6.2.0_rc5_next_20230127+ INSTALL_HDR_PATH=$PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/usr headers_install
make[3]: warning: -j128 forced in submake: resetting jobserver mode.
+ cp System.map $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/boot/System.map-6.2.0-rc5-next-20230127+
+ cp .config $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/boot/config-6.2.0-rc5-next-20230127+
+ /usr/lib/rpm/brp-compress
Processing files: kernel-6.2.0_rc5_next_20230127+-1.aarch64
error: File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+
warning: File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+/build
warning: File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+/source

RPM build warnings:

    line 23: It's not recommended to have unversioned Obsoletes: Obsoletes: kernel-headers
    File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+/build
    File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+/source

RPM build errors:
cannot open Packages database in /var/lib/rpm
File not found: $PWD/rpmbuild/BUILDROOT/kernel-6.2.0_rc5_next_20230127+-1.aarch64/lib/modules/6.2.0-rc5-next-20230127+
...

Cheers,
Nathan

Signature · 2 lines
Best Regards
Masahiro Yamada
Reviewed-by on v1 1/7
#16 lore raw
In reply to Masahiro Yamada
Quoted 70 lines · Masahiro Yamada

.scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE.

In fact, deb-pkg does not rely on it any more because the generated debian/rules specifies KERNELRELEASE from the command line.

Do likwise for (src)rpm-pkg, and remove this feature.

---

 scripts/Makefile.package |  6 ++----
 scripts/package/mkspec   |  6 +++---
 scripts/setlocalversion  | 19 +------------------
 3 files changed, 6 insertions(+), 25 deletions(-)
scripts/Makefile.package +2 -4
index 525a2820976f..e84c4e8ceb8e 100644
@@ -32,7 +32,7 @@ export KDEB_SOURCENAME
 TAR_CONTENT := Documentation LICENSES arch block certs crypto drivers fs \
                include init io_uring ipc kernel lib mm net rust \
                samples scripts security sound tools usr virt \
-               .config .scmversion Makefile \
+               .config Makefile \
                Kbuild Kconfig COPYING $(wildcard localversion*)
 MKSPEC     := $(srctree)/scripts/package/mkspec
 
@@ -47,10 +47,8 @@ if test "$(objtree)" != "$(srctree)"; then \
 	echo >&2; \
 	false; \
 fi ; \
-$(srctree)/scripts/setlocalversion --save-scmversion; \
 tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \
-	--transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \
-rm -f $(objtree)/.scmversion
+	--transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3)
 
 # rpm-pkg
 # ---------------------------------------------------------------------------
scripts/package/mkspec +3 -3
index adab28fa7f89..d3c6701b7769 100755
@@ -90,7 +90,7 @@ $S	rm -f scripts/basic/fixdep scripts/kconfig/conf
 $S	rm -f tools/objtool/{fixdep,objtool}
 $S
 $S	%build
-$S	$MAKE %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release}
+$S	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} KBUILD_BUILD_VERSION=%{release}
 $S
 	%install
 	mkdir -p %{buildroot}/boot
@@ -101,8 +101,8 @@ $S
 	%else
 	cp \$($MAKE -s image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE
 	%endif
-$M	$MAKE %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} modules_install
-	$MAKE %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
+$M	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_MOD_PATH=%{buildroot} modules_install
+	$MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
 	cp System.map %{buildroot}/boot/System.map-$KERNELRELEASE
 	cp .config %{buildroot}/boot/config-$KERNELRELEASE
 $S$M	rm -f %{buildroot}/lib/modules/$KERNELRELEASE/build
scripts/setlocalversion +0 -0
index af4754a35e66..3b31702b4a4a 100755

scripts/setlocalversion line 14

Quoted 5 lines
scripts/setlocalversion +1 -1
@@ -11,16 +11,11 @@
 #
 
 usage() {
-	echo "Usage: $0 [--save-scmversion] [srctree]" >&2
+	echo "Usage: $0 [srctree]" >&2

Hi Masahiro,

as .scmversion will not we generated (or removed by 'make clean' or 'make mrproper'), might it make sense to add it to scripts/remove-stale-files?

Kind regards,
Nicolas

#17 lore raw
Quoted 80 lines · Nicolas Schier
Quoted 70 lines · Masahiro Yamada

.scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE.

In fact, deb-pkg does not rely on it any more because the generated debian/rules specifies KERNELRELEASE from the command line.

Do likwise for (src)rpm-pkg, and remove this feature.

---

 scripts/Makefile.package |  6 ++----
 scripts/package/mkspec   |  6 +++---
 scripts/setlocalversion  | 19 +------------------
 3 files changed, 6 insertions(+), 25 deletions(-)
scripts/Makefile.package +2 -4
index 525a2820976f..e84c4e8ceb8e 100644
@@ -32,7 +32,7 @@ export KDEB_SOURCENAME
 TAR_CONTENT := Documentation LICENSES arch block certs crypto drivers fs \
                include init io_uring ipc kernel lib mm net rust \
                samples scripts security sound tools usr virt \
-               .config .scmversion Makefile \
+               .config Makefile \
                Kbuild Kconfig COPYING $(wildcard localversion*)
 MKSPEC     := $(srctree)/scripts/package/mkspec
 
@@ -47,10 +47,8 @@ if test "$(objtree)" != "$(srctree)"; then \
      echo >&2; \
      false; \
 fi ; \
-$(srctree)/scripts/setlocalversion --save-scmversion; \
 tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \
-     --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \
-rm -f $(objtree)/.scmversion
+     --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3)
 
 # rpm-pkg
 # ---------------------------------------------------------------------------
scripts/package/mkspec +3 -3
index adab28fa7f89..d3c6701b7769 100755
@@ -90,7 +90,7 @@ $S  rm -f scripts/basic/fixdep scripts/kconfig/conf
 $S   rm -f tools/objtool/{fixdep,objtool}
 $S
 $S   %build
-$S   $MAKE %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release}
+$S   $MAKE %{?_smp_mflags} KERNELRELEASE=%{version} KBUILD_BUILD_VERSION=%{release}
 $S
      %install
      mkdir -p %{buildroot}/boot
@@ -101,8 +101,8 @@ $S
      %else
      cp \$($MAKE -s image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE
      %endif
-$M   $MAKE %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} modules_install
-     $MAKE %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
+$M   $MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_MOD_PATH=%{buildroot} modules_install
+     $MAKE %{?_smp_mflags} KERNELRELEASE=%{version} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
      cp System.map %{buildroot}/boot/System.map-$KERNELRELEASE
      cp .config %{buildroot}/boot/config-$KERNELRELEASE
 $S$M rm -f %{buildroot}/lib/modules/$KERNELRELEASE/build
scripts/setlocalversion +0 -0
index af4754a35e66..3b31702b4a4a 100755

scripts/setlocalversion line 14

Quoted 5 lines
scripts/setlocalversion +1 -1
@@ -11,16 +11,11 @@
 #
 
 usage() {
-     echo "Usage: $0 [--save-scmversion] [srctree]" >&2
+     echo "Usage: $0 [srctree]" >&2

Hi Masahiro,

Quoted 8 lines

as .scmversion will not we generated (or removed by 'make clean' or 'make mrproper'), might it make sense to add it to scripts/remove-stale-files?

Kind regards,
Nicolas

Good point.

.scmversion is removed after the tarball is created (see "rm -f $(objtree)/.scmversion"), but it is left over if the user interrupts while the tarball is being created.

I will fold it locally.

Thanks.

Signature · 2 lines
Best Regards
Masahiro Yamada