Support smp.clusters for x86
cover Support smp.clusters for x86
From: Zhao Liu <[email protected]>
Hi list,
This series is based on 13356ed (Merge tag 'block-pull-request' of
https://gitlab.com/stefanha/qemu into staging), and adds the cluster support for x86 PC machine, which allows x86 can use smp.clusters to configure the modlue level CPU topology of x86.
And since the compatibility issue (see section: ## Why not share L2 cache in cluster directly), this series also introduce a new command to adjust the topology of the x86 L2 cache.
Welcome your comments!
# Backgroud
The "clusters" parameter in "smp" is introduced by ARM [1], but x86 hasn't supported it.
At present, x86 defaults L2 cache is shared in one core, but this is not enough. There're some platforms that multiple cores share the same L2 cache, e.g., Alder Lake-P shares L2 cache for one module of Atom cores [2], that is, every four Atom cores shares one L2 cache. Therefore, we need the new CPU topology level (cluster/module).
Another reason is for hybrid architecture. cluster support not only provides another level of topology definition in x86, but would aslo provide required code change for future our hybrid topology support.
# Overview
## Introduction of module level for x86
"cluster" in smp is the CPU topology level which is between "core" and die.
For x86, the "cluster" in smp is corresponding to the module level [3], which is above the core level. So use the "module" other than "cluster" in x86 code.
And please note that x86 already has a cpu topology level also named "cluster" [3], this level is at the upper level of the package. Here, the cluster in x86 cpu topology is completely different from the "clusters" as the smp parameter. After the module level is introduced, the cluster as the smp parameter will actually refer to the module level of x86.
## Why not share L2 cache in cluster directly
Though "clusters" was introduced to help define L2 cache topology [1], using cluster to define x86's L2 cache topology will cause the compatibility problem:
Currently, x86 defaults that the L2 cache is shared in one core, which actually implies a default setting "cores per L2 cache is 1" and therefore implicitly defaults to having as many L2 caches as cores.
For example (i386 PC machine):
-smp 16,sockets=2,dies=2,cores=2,threads=2,maxcpus=16 (*)
Considering the topology of the L2 cache, this (*) implicitly means "1 core per L2 cache" and "2 L2 caches per die".
If we use cluster to configure L2 cache topology with the new default setting "clusters per L2 cache is 1", the above semantics will change to "2 cores per cluster" and "1 cluster per L2 cache", that is, "2 cores per L2 cache".
So the same command (*) will cause changes in the L2 cache topology, further affecting the performance of the virtual machine.
Therefore, x86 should only treat cluster as a cpu topology level and avoid using it to change L2 cache by default for compatibility.
## module level in CPUID
Currently, we don't expose module level in CPUID.1FH because currently linux (v6.2-rc6) doesn't support module level. And exposing module and die levels at the same time in CPUID.1FH will cause linux to calculate wrong die_id. The module level should be exposed until the real machine has the module level in CPUID.1FH.
We can configure CPUID.04H.02H (L2 cache topology) with module level by a new command:
"-cpu,x-l2-cache-topo=cluster"
More information about this command, please see the section: "## New
property: x-l2-cache-topo".
## New cache topology info in CPUCacheInfo
Currently, by default, the cache topology is encoded as:
1. i/d cache is shared in one core.
* In fact, the original is SMT level, which will be changed to core level in the patch: [PATCH 04/18] i386/cpu: Fix number of addressable IDs in CPUID.04H).
2. L2 cache is shared in one core.
3. L3 cache is shared in one die.
This default general setting has caused a misunderstanding, that is, the cache topology is completely equated with a specific cpu topology, such as the connection between L2 cache and core level, and the connection between L3 cache and die level.
In fact, the settings of these topologies depend on the specific platform and are not static. For example, on Alder Lake-P, every four Atom cores share the same L2 cache [2].
Thus, in this patch set, we explicitly define the corresponding cache topology for different cpu models and this has two benefits:
1. Easy to expand to new CPU models in the future, which has different cache topology.
2. It can easily support custom cache topology by some command (e.g., x-l2-cache-topo).
## New property: x-l2-cache-topo
The property l2-cache-topo will be used to change the L2 cache topology in CPUID.04H.
Now it allows user to set the L2 cache is shared in core level or cluster level.
If user passes "-cpu x-l2-cache-topo=[core|cluster]" then older L2 cache topology will be overrided by the new topology setting.
Since CPUID.04H is used by intel cpus, this property is available on intel cpus as for now.
When necessary, it can be extended to CPUID[0x8000001D] for amd cpus.
# Patch description
patch 1-5 Cleanups and fixes related to subsequent changes.
patch 6-13 Add the module as the new CPU topology level in x86, and it
is corresponding to the cluster level in generic code.
patch 14-17 Add cache topology infomation in cache models.
patch 18 Introduce a new command to configure L2 cache topology.
[1]: https://patchew.org/QEMU/[email protected]/
[2]: https://www.intel.com/content/www/us/en/products/platforms/details/alder-lake-p.html
[3]: SDM, vol.3, ch.9, 9.9.1 Hierarchical Mapping of Shared Resources.
---
Zhao Liu (10):
machine: Fix comment of machine_parse_smp_config()
tests: Rename test-x86-cpuid.c to test-x86-apicid.c
i386/cpu: Fix number of addressable IDs in CPUID.04H
i386/cpu: Consolidate the use of topo_info in cpu_x86_cpuid()
i386: Fix comment style in topology.h
i386: Add cache topology info in CPUCacheInfo
i386: Use CPUCacheInfo.share_level to encode CPUID[4].EAX[bits 25:14]
i386: Fix NumSharingCache for CPUID[0x8000001D].EAX[bits 25:14]
i386: Use CPUCacheInfo.share_level to encode
CPUID[0x8000001D].EAX[bits 25:14]
i386: Add new property to control L2 cache topo in CPUID.04H
Zhuocheng Ding (8):
softmmu: Fix CPUSTATE.nr_cores' calculation
i386: Introduce module-level cpu topology to CPUX86State
i386: Support modules_per_die in X86CPUTopoInfo
i386: Support module_id in X86CPUTopoIDs
i386: Update APIC ID parsing rule to support module level i386/cpu: Introduce cluster-id to X86CPU
tests: Add test case of APIC ID for module level parsing hw/i386/pc: Support smp.clusters for x86 PC machine
MAINTAINERS | 2 +-
hw/core/machine-smp.c | 7 +-
hw/i386/pc.c | 1 +
hw/i386/x86.c | 49 +++++-
include/hw/core/cpu.h | 2 +-
include/hw/i386/topology.h | 68 +++++---
qemu-options.hx | 10 +-
softmmu/cpus.c | 2 +-
target/i386/cpu.c | 146 ++++++++++++++----
target/i386/cpu.h | 25 +++
tests/unit/meson.build | 4 +-
.../{test-x86-cpuid.c => test-x86-apicid.c} | 58 ++++---
12 files changed, 275 insertions(+), 99 deletions(-)
rename tests/unit/{test-x86-cpuid.c => test-x86-apicid.c} (73%)Signature · 1 line
2.34.1
PATCH 1/18 machine: Fix comment of machine_parse_smp_config()
From: Zhao Liu <[email protected]>
Now smp supports dies and clusters, so add description about these 2 levels in the comment of machine_parse_smp_config().
--- hw/core/machine-smp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
hw/core/machine-smp.c +4 -3
@@ -51,8 +51,8 @@ static char *cpu_hierarchy_to_string(MachineState *ms)* machine_parse_smp_config: Generic function used to parse the given * SMP configuration * -* Any missing parameter in "cpus/maxcpus/sockets/cores/threads" will be -* automatically computed based on the provided ones. +* Any missing parameter in "cpus/maxcpus/sockets/dies/clusters/cores/threads" +* will be automatically computed based on the provided ones. * * In the calculation of omitted sockets/cores/threads: we prefer sockets * over cores over threads before 6.2, while preferring cores over sockets
@@ -66,7 +66,8 @@ static char *cpu_hierarchy_to_string(MachineState *ms)* * For compatibility, apart from the parameters that will be computed, newly * introduced topology members which are likely to be target specific should -* be directly set as 1 if they are omitted (e.g. dies for PC since 4.1). +* be directly set as 1 if they are omitted (e.g. dies for PC since v4.1 and +* clusters for arm since v7.0). */ void machine_parse_smp_config (MachineState *ms,const SMPConfiguration *config,Error **errp)
Signature · 1 line
2.34.1
PATCH 2/18 tests: Rename test-x86-cpuid.c to test-x86-apicid.c
In reply to Zhao LiuFrom: Zhao Liu <[email protected]>
In fact, this unit tests APIC ID other than CPUID. Rename to test-x86-apicid.c to make its name more in line with its actual content.
---
MAINTAINERS | 2 +-
tests/unit/meson.build | 4 ++--
tests/unit/{test-x86-cpuid.c => test-x86-apicid.c} | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
rename tests/unit/{test-x86-cpuid.c => test-x86-apicid.c} (99%)MAINTAINERS +1 -1
@@ -1674,7 +1674,7 @@ F: include/hw/southbridge/piix.h F: hw/misc/sga.c F: hw/isa/apm.c F: include/hw/isa/apm.h -F: tests/unit/test-x86-cpuid.c +F: tests/unit/test-x86-apicid.c F: tests/qtest/test-x86-cpuid-compat.c PC Chipset
tests/unit/meson.build +2 -2
@@ -20,8 +20,8 @@ tests = { 'test-opts-visitor': [testqapi], 'test-visitor-serialization': [testqapi], 'test-bitmap': [], - # all code tested by test-x86-cpuid is inside topology.h - 'test-x86-cpuid': [], + # all code tested by test-x86-apicid is inside topology.h + 'test-x86-apicid': [], 'test-cutils': [], 'test-div128': [], 'test-shift128': [],
tests/unit/test-x86-apicid.c renamed from tests/unit/test-x86-cpuid.c +1 -1
@@ -1,5 +1,5 @@/* -* Test code for x86 CPUID and Topology functions +* Test code for x86 APIC ID and Topology functions * * Copyright (c) 2012 Red Hat Inc. *
Signature · 1 line
2.34.1
PATCH 3/18 softmmu: Fix CPUSTATE.nr_cores' calculation
In reply to Zhao LiuFrom: Zhuocheng Ding <[email protected]>
From CPUState.nr_cores' comment, it represents "number of cores within this CPU package".
After 003f230 (machine: Tweak the order of topology members in struct CpuTopology), the meaning of smp.cores changed to "the number of cores in one die", but this commit missed to change CPUState.nr_cores' caculation, so that CPUState.nr_cores became wrong and now it misses to consider numbers of clusters and dies.
At present, only i386 is using CPUState.nr_cores.
But as for i386, which supports die level, the uses of CPUState.nr_cores are very confusing:
Early uses are based on the meaning of "cores per package" (before die is introduced into i386), and later uses are based on "cores per die" (after die's introduction).
This difference is due to that commit a94e142 (target/i386: Add CPUID.1F generation support for multi-dies PCMachine) misunderstood that CPUState.nr_cores means "cores per die" when caculated CPUID.1FH.01H:EBX. After that, the changes in i386 all followed this wrong understanding.
With the influence of 003f230 and a94e142, for i386 currently the result of CPUState.nr_cores is "cores per die", thus the original uses of CPUState.cores based on the meaning of "cores per package" are wrong when mutiple dies exist:
1. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.01H:EBX[bits 23:16] is incorrect because it expects "cpus per package" but now the result is "cpus per die".
2. In cpu_x86_cpuid() of target/i386/cpu.c, for all leaves of CPUID.04H:
EAX[bits 31:26] is incorrect because they expect "cpus per package" but now the result is "cpus per die". The error not only impacts the EAX caculation in cache_info_passthrough case, but also impacts other cases of setting cache topology for Intel CPU according to cpu topology (specifically, the incoming parameter "num_cores" expects "cores per package" in encode_cache_cpuid4()).
3. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.0BH.01H:EBX[bits 15:00] is incorrect because the EBX of 0BH.01H (core level) expects "cpus per package", which may be different with 1FH.01H (The reason is 1FH can support more levels. For QEMU, 1FH also supports die, 1FH.01H:EBX[bits 15:00] expects "cpus per die").
4. In cpu_x86_cpuid() of target/i386/cpu.c, when CPUID.80000001H is caculated, here "cpus per package" is expected to be checked, but in fact, now it checks "cpus per die". Though "cpus per die" also works for this code logic, this isn't consistent with AMD's APM.
5. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.80000008H:ECX expects "cpus per package" but it obtains "cpus per die".
6. In simulate_rdmsr() of target/i386/hvf/x86_emu.c, in kvm_rdmsr_core_thread_count() of target/i386/kvm/kvm.c, and in helper_rdmsr() of target/i386/tcg/sysemu/misc_helper.c, MSR_CORE_THREAD_COUNT expects "cpus per package" and "cores per package", but in these functions, it obtains "cpus per die" and "cores per die".
On the other hand, these uses are correct now (they are added in/after a94e142):
1. In cpu_x86_cpuid() of target/i386/cpu.c, topo_info.cores_per_die meets the actual meaning of CPUState.nr_cores ("cores per die").
2. In cpu_x86_cpuid() of target/i386/cpu.c, vcpus_per_socket (in CPUID. 04H's caculation) considers number of dies, so it's correct.
3. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.1FH.01H:EBX[bits 15:00] needs "cpus per die" and it gets the correct result, and CPUID.1FH.02H:EBX[bits 15:00] gets correct "cpus per package".
When CPUState.nr_cores is correctly changed to "cores per package" again , the above errors will be fixed without extra work, but the "currently" correct cases will go wrong and need special handling to pass correct "cpus/cores per die" they want.
Thus in this patch, we fix CPUState.nr_cores' caculation to fit the original meaning "cores per package", as well as changing caculation of topo_info.cores_per_die, vcpus_per_socket and CPUID.1FH.
In addition, in the nr_threads' comment, specify it represents the number of threads in the "core" to avoid confusion.
--- include/hw/core/cpu.h | 2 +- softmmu/cpus.c | 2 +- target/i386/cpu.c | 9 ++++----- 3 files changed, 6 insertions(+), 7 deletions(-)
include/hw/core/cpu.h +1 -1
@@ -274,7 +274,7 @@ struct qemu_work_item;* QOM parent. * @tcg_cflags: Pre-computed cflags for this cpu. * @nr_cores: Number of cores within this CPU package. -* @nr_threads: Number of threads within this CPU. +* @nr_threads: Number of threads within this CPU core. * @running: #true if CPU is currently running (lockless). * @has_waiter: #true if a CPU is currently waiting for the cpu_exec_end; * valid under cpu_list_lock.
softmmu/cpus.c +1 -1
@@ -630,7 +630,7 @@ void qemu_init_vcpu(CPUState *cpu) {MachineState *ms =MACHINE (qdev_get_machine ()); - cpu->nr_cores = ms->smp.cores; + cpu->nr_cores = ms->smp.dies * ms->smp.clusters * ms->smp.cores; cpu->nr_threads = ms->smp.threads; cpu->stopped = true; cpu->random_seed =qemu_guest_random_seed_thread_part1 ();
target/i386/cpu.c +4 -5
@@ -5218,7 +5218,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,X86CPUTopoInfo topo_info; topo_info.dies_per_pkg = env->nr_dies; - topo_info.cores_per_die = cs->nr_cores; + topo_info.cores_per_die = cs->nr_cores / env->nr_dies; topo_info.threads_per_core = cs->nr_threads;/* Calculate & apply limits for different index ranges */
@@ -5294,8 +5294,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,*/ if (*eax &31 ) {int host_vcpus_per_cache =1 + ((*eax &0x3FFC000 ) >>14 ); -int vcpus_per_socket = env->nr_dies * cs->nr_cores * - cs->nr_threads; +int vcpus_per_socket = cs->nr_cores * cs->nr_threads;if (cs->nr_cores >1 ) { *eax &= ~0xFC000000 ; *eax |= (pow2ceil (cs->nr_cores) -1 ) <<26 ;
@@ -5468,12 +5467,12 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,break ;case 1 : *eax =apicid_die_offset (&topo_info); - *ebx = cs->nr_cores * cs->nr_threads; + *ebx = topo_info.cores_per_die * topo_info.threads_per_core; *ecx |=CPUID_TOPOLOGY_LEVEL_CORE ;break ;case 2 : *eax =apicid_pkg_offset (&topo_info); - *ebx = env->nr_dies * cs->nr_cores * cs->nr_threads; + *ebx = cs->nr_cores * cs->nr_threads; *ecx |=CPUID_TOPOLOGY_LEVEL_DIE ;break ;default :
Signature · 1 line
2.34.1
PATCH 4/18 i386/cpu: Fix number of addressable IDs in CPUID.04H
In reply to Zhao LiuFrom: Zhao Liu <[email protected]>
For i-cache and d-cache, the maximum IDs for CPUs sharing cache ( CPUID.04H.00H:EAX[bits 25:14] and CPUID.04H.01H:EAX[bits 25:14]) are both 0, and this means i-cache and d-cache are shared in the SMT level. This is correct if there's single thread per core, but is wrong for the hyper threading case (one core contains multiple threads) since the i-cache and d-cache are shared in the core level other than SMT level.
Therefore, in order to be compatible with both multi-threaded and single-threaded situations, we should set i-cache and d-cache be shared at the core level by default.
Refer to the fixes of cache_info_passthrough ([1], [2]) and SDM, the CPUID.04H:EAX[bits 25:14] and CPUID.04H:EAX[bits 31:26] should use the nearest power-of-2 integer.
The nearest power-of-2 integer can be caculated by pow2ceil() or by using APIC ID offset (like L3 topology using 1 << die_offset [3]).
But in fact, CPUID.04H:EAX[bits 25:14] and CPUID.04H:EAX[bits 31:26] are associated with APIC ID. For example, in linux kernel, the field "num_threads_sharing" (Bits 25 - 14) is parsed with APIC ID. And for another example, on Alder Lake P, the CPUID.04H:EAX[bits 31:26] is not matched with actual core numbers and it's caculated by:
"(1 << (pkg_offset - core_offset)) - 1".
Therefore the offset of APIC ID should be preferred to caculate nearest power-of-2 integer for CPUID.04H:EAX[bits 25:14] and CPUID.04H:EAX[bits 31:26]:
1. d/i cache is shared in a core, 1 << core_offset should be used instand of "1" in encode_cache_cpuid4() for CPUID.04H.00H:EAX[bits 25:14] and CPUID.04H.01H:EAX[bits 25:14].
2. L2 cache is supposed to be shared in a core as for now, thereby 1 << core_offset should also be used instand of "cs->nr_threads" in encode_cache_cpuid4() for CPUID.04H.02H:EAX[bits 25:14].
3. Similarly, the value for CPUID.04H:EAX[bits 31:26] should also be replaced by the offsets upper SMT level in APIC ID.
And since [1] and [2] are good enough to make cache_into_passthrough work well, its "pow2ceil()" uses are enough so that they're no need to be replaced by APIC ID offset way.
[1]: efb3934 (x86: cpu: make sure number of addressable IDs for processor cores meets the spec) [2]: d7caf13 (x86: cpu: fixup number of addressable IDs for logical processors sharing cache) [3]: d65af28 (i386: Update new x86_apicid parsing rules with die_offset support)
--- target/i386/cpu.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
target/i386/cpu.c +15 -5
@@ -5212,7 +5212,6 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, {X86CPU *cpu =env_archcpu (env);CPUState *cs =env_cpu (env); -uint32_t die_offset;uint32_t limit;uint32_t signature[3 ];X86CPUTopoInfo topo_info;
@@ -5308,27 +5307,38 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, *eax = *ebx = *ecx = *edx =0 ; }else { *eax =0 ; +int addressable_cores_offset =apicid_pkg_offset (&topo_info) - +apicid_core_offset (&topo_info); +int core_offset, die_offset; +switch (count) {case 0 :/* L1 dcache info */ + core_offset =apicid_core_offset (&topo_info);encode_cache_cpuid4 (env->cache_info_cpuid4.l1d_cache, -1 , cs->nr_cores, + (1 << core_offset), + (1 << addressable_cores_offset), eax, ebx, ecx, edx);break ;case 1 :/* L1 icache info */ + core_offset =apicid_core_offset (&topo_info);encode_cache_cpuid4 (env->cache_info_cpuid4.l1i_cache, -1 , cs->nr_cores, + (1 << core_offset), + (1 << addressable_cores_offset), eax, ebx, ecx, edx);break ;case 2 :/* L2 cache info */ + core_offset =apicid_core_offset (&topo_info);encode_cache_cpuid4 (env->cache_info_cpuid4.l2_cache, - cs->nr_threads, cs->nr_cores, + (1 << core_offset), + (1 << addressable_cores_offset), eax, ebx, ecx, edx);break ;case 3 :/* L3 cache info */ die_offset =apicid_die_offset (&topo_info);if (cpu->enable_l3_cache) {encode_cache_cpuid4 (env->cache_info_cpuid4.l3_cache, - (1 << die_offset), cs->nr_cores, + (1 << die_offset), + (1 << addressable_cores_offset), eax, ebx, ecx, edx);break ; }
Signature · 1 line
2.34.1
PATCH 5/18 i386/cpu: Consolidate the use of topo_info in cpu_x86_cpuid()
In reply to Zhao LiuFrom: Zhao Liu <[email protected]>
In cpu_x86_cpuid(), there are many variables in representing the cpu topology, e.g., topo_info, cs->nr_cores/cs->nr_threads.
Since the names of cs->nr_cores/cs->nr_threads does not accurately represent its meaning, the use of cs->nr_cores/cs->nr_threads is prone to confusion and mistakes.
And the structure X86CPUTopoInfo names its memebers clearly, thus the variable "topo_info" should be preferred.
--- target/i386/cpu.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-)
target/i386/cpu.c +18 -12
@@ -5215,11 +5215,15 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,uint32_t limit;uint32_t signature[3 ];X86CPUTopoInfo topo_info; +uint32_t cpus_per_pkg; topo_info.dies_per_pkg = env->nr_dies; topo_info.cores_per_die = cs->nr_cores / env->nr_dies; topo_info.threads_per_core = cs->nr_threads; + cpus_per_pkg = topo_info.dies_per_pkg * topo_info.cores_per_die * + topo_info.threads_per_core; +/* Calculate & apply limits for different index ranges */ if (index >=0xC0000000 ) { limit = env->cpuid_xlevel2;
@@ -5255,8 +5259,8 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, *ecx |=CPUID_EXT_OSXSAVE ; } *edx = env->features[FEAT_1_EDX ]; -if (cs->nr_cores * cs->nr_threads >1 ) { - *ebx |= (cs->nr_cores * cs->nr_threads) <<16 ; +if (cpus_per_pkg >1 ) { + *ebx |= cpus_per_pkg <<16 ; *edx |=CPUID_HT ; }if (!cpu->enable_pmu) {
@@ -5293,10 +5297,12 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,*/ if (*eax &31 ) {int host_vcpus_per_cache =1 + ((*eax &0x3FFC000 ) >>14 ); -int vcpus_per_socket = cs->nr_cores * cs->nr_threads; -if (cs->nr_cores >1 ) { +int vcpus_per_socket = cpus_per_pkg; +int cores_per_socket = topo_info.cores_per_die * + topo_info.dies_per_pkg; +if (cores_per_socket >1 ) { *eax &= ~0xFC000000 ; - *eax |= (pow2ceil (cs->nr_cores) -1 ) <<26 ; + *eax |= (pow2ceil (cores_per_socket) -1 ) <<26 ; }if (host_vcpus_per_cache > vcpus_per_socket) { *eax &= ~0x3FFC000 ;
@@ -5436,12 +5442,12 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,switch (count) {case 0 : *eax =apicid_core_offset (&topo_info); - *ebx = cs->nr_threads; + *ebx = topo_info.threads_per_core; *ecx |=CPUID_TOPOLOGY_LEVEL_SMT ;break ;case 1 : *eax =apicid_pkg_offset (&topo_info); - *ebx = cs->nr_cores * cs->nr_threads; + *ebx = cpus_per_pkg; *ecx |=CPUID_TOPOLOGY_LEVEL_CORE ;break ;default :
@@ -5472,7 +5478,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,switch (count) {case 0 : *eax =apicid_core_offset (&topo_info); - *ebx = cs->nr_threads; + *ebx = topo_info.threads_per_core; *ecx |=CPUID_TOPOLOGY_LEVEL_SMT ;break ;case 1 :
@@ -5482,7 +5488,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,break ;case 2 : *eax =apicid_pkg_offset (&topo_info); - *ebx = cs->nr_cores * cs->nr_threads; + *ebx = cpus_per_pkg; *ecx |=CPUID_TOPOLOGY_LEVEL_DIE ;break ;default :
@@ -5707,7 +5713,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,* discards multiple thread information if it is set. * So don't set it here for Intel to make Linux guests happy. */ -if (cs->nr_cores * cs->nr_threads >1 ) { +if (cpus_per_pkg >1 ) {if (env->cpuid_vendor1 !=CPUID_VENDOR_INTEL_1 || env->cpuid_vendor2 !=CPUID_VENDOR_INTEL_2 || env->cpuid_vendor3 !=CPUID_VENDOR_INTEL_3 ) {
@@ -5769,7 +5775,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, *eax |= (cpu_x86_virtual_addr_width (env) <<8 ); } *ebx = env->features[FEAT_8000_0008_EBX ]; -if (cs->nr_cores * cs->nr_threads >1 ) { +if (cpus_per_pkg >1 ) {/* * Bits 15:12 is "The number of bits in the initial * Core::X86::Apic::ApicId[ApicId] value that indicate
@@ -5777,7 +5783,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,* Bits 7:0 is "The number of threads in the package is NC+1" */ *ecx = (apicid_pkg_offset (&topo_info) <<12 ) | - ((cs->nr_cores * cs->nr_threads) -1 ); + (cpus_per_pkg -1 ); }else { *ecx =0 ; }
Signature · 1 line
2.34.1
PATCH 6/18 i386: Introduce module-level cpu topology to CPUX86State
In reply to Zhao LiuFrom: Zhuocheng Ding <[email protected]>
smp command has the "clusters" parameter but x86 hasn't supported that level. Though "clusters" was introduced to help define L2 cache topology [1], using cluster to define x86's L2 cache topology will cause the compatibility problem:
Currently, x86 defaults that the L2 cache is shared in one core, which actually implies a default setting "cores per L2 cache is 1" and therefore implicitly defaults to having as many L2 caches as cores.
For example (i386 PC machine):
-smp 16,sockets=2,dies=2,cores=2,threads=2,maxcpus=16 (*)
Considering the topology of the L2 cache, this (*) implicitly means "1 core per L2 cache" and "2 L2 caches per die".
If we use cluster to configure L2 cache topology with the new default setting "clusters per L2 cache is 1", the above semantics will change to "2 cores per cluster" and "1 cluster per L2 cache", that is, "2 cores per L2 cache".
So the same command (*) will cause changes in the L2 cache topology, further affecting the performance of the virtual machine.
Therefore, x86 should only treat cluster as a cpu topology level and avoid using it to change L2 cache by default for compatibility.
"cluster" in smp is the CPU topology level which is between "core" and die.
For x86, the "cluster" in smp is corresponding to the module level [2], which is above the core level. So use the "module" other than "cluster" in i386 code.
And please note that x86 already has a cpu topology level also named "cluster" [2], this level is at the upper level of the package. Here, the cluster in x86 cpu topology is completely different from the "clusters" as the smp parameter. After the module level is introduced, the cluster as the smp parameter will actually refer to the module level of x86.
[1]: 0d87178 (hw/core/machine: Introduce CPU cluster topology support) [2]: SDM, vol.3, ch.9, 9.9.1 Hierarchical Mapping of Shared Resources.
--- hw/i386/x86.c | 1 + target/i386/cpu.c | 1 + target/i386/cpu.h | 6 ++++++ 3 files changed, 8 insertions(+)
hw/i386/x86.c +1 -0
@@ -305,6 +305,7 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev,init_topo_info (&topo_info, x86ms); env->nr_dies = ms->smp.dies; + env->nr_modules = ms->smp.clusters;/* * If APIC ID is not set,
target/i386/cpu.c +1 -0
@@ -6781,6 +6781,7 @@ static void x86_cpu_initfn(Object *obj)CPUX86State *env = &cpu->env; env->nr_dies =1 ; + env->nr_modules =1 ;cpu_set_cpustate_pointers (cpu); object_property_add(obj, "feature-words", "X86CPUFeatureWordInfo",
target/i386/cpu.h +6 -0
@@ -1810,7 +1810,13 @@ typedef struct CPUArchState {TPRAccess tpr_access_type; +/* Number of dies per package. */ unsigned nr_dies; +/* +* Number of modules per die. Module level in x86 cpu topology is +* corresponding to smp.clusters. +*/ +unsigned nr_modules; } CPUX86State;struct kvm_msrs ;
Signature · 1 line
2.34.1
PATCH 7/18 i386: Support modules_per_die in X86CPUTopoInfo
In reply to Zhao LiuFrom: Zhuocheng Ding <[email protected]>
Support module level in i386 cpu topology structure "X86CPUTopoInfo".
Before updating APIC ID parsing rule with module level, the apicid_core_width() temporarily combines the core and module levels together.
At present, we don't expose module level in CPUID.1FH because currently linux (v6.2-rc6) doesn't support module level. And exposing module and die levels at the same time in CPUID.1FH will cause linux to calculate the wrong die_id. The module level should be exposed until the real machine has the module level in CPUID.1FH.
In addition, update topology structure in test-x86-apicid.c.
--- hw/i386/x86.c | 3 ++- include/hw/i386/topology.h | 13 ++++++++--- target/i386/cpu.c | 17 ++++++++------ tests/unit/test-x86-apicid.c | 45 +++++++++++++++++++----------------- 4 files changed, 46 insertions(+), 32 deletions(-)
hw/i386/x86.c +2 -1
@@ -70,7 +70,8 @@ inline void init_topo_info(X86CPUTopoInfo *topo_info,MachineState *ms =MACHINE (x86ms); topo_info->dies_per_pkg = ms->smp.dies; - topo_info->cores_per_die = ms->smp.cores; + topo_info->modules_per_die = ms->smp.clusters; + topo_info->cores_per_module = ms->smp.cores; topo_info->threads_per_core = ms->smp.threads; }
include/hw/i386/topology.h +10 -3
@@ -54,7 +54,8 @@ typedef struct X86CPUTopoIDs {typedef struct X86CPUTopoInfo {unsigned dies_per_pkg; -unsigned cores_per_die; +unsigned modules_per_die; +unsigned cores_per_module;unsigned threads_per_core; }X86CPUTopoInfo ;
@@ -78,7 +79,12 @@ static inline unsigned apicid_smt_width(X86CPUTopoInfo *topo_info)*/ static inline unsigned apicid_core_width (X86CPUTopoInfo *topo_info) { -return apicid_bitwidth_for_count (topo_info->cores_per_die); +/* +* TODO: Will separate module info from core_width when update +* APIC ID with module level. +*/ +return apicid_bitwidth_for_count (topo_info->cores_per_module * + topo_info->modules_per_die); }/* Bit width of the Die_ID field */
@@ -128,7 +134,8 @@ static inline void x86_topo_ids_from_idx(X86CPUTopoInfo *topo_info, X86CPUTopoIDs *topo_ids) {unsigned nr_dies = topo_info->dies_per_pkg; -unsigned nr_cores = topo_info->cores_per_die; +unsigned nr_cores = topo_info->cores_per_module * + topo_info->modules_per_die;unsigned nr_threads = topo_info->threads_per_core; topo_ids->pkg_id = cpu_index / (nr_dies * nr_cores * nr_threads);
target/i386/cpu.c +10 -7
@@ -336,7 +336,9 @@ static void encode_cache_cpuid8000001d(CPUCacheInfo *cache,/* L3 is shared among multiple cores */ if (cache->level ==3 ) { - l3_threads = topo_info->cores_per_die * topo_info->threads_per_core; + l3_threads = topo_info->modules_per_die * + topo_info->cores_per_module * + topo_info->threads_per_core; *eax |= (l3_threads -1 ) <<14 ; }else { *eax |= ((topo_info->threads_per_core -1 ) <<14 );
@@ -5218,11 +5220,12 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,uint32_t cpus_per_pkg; topo_info.dies_per_pkg = env->nr_dies; - topo_info.cores_per_die = cs->nr_cores / env->nr_dies; + topo_info.modules_per_die = env->nr_modules; + topo_info.cores_per_module = cs->nr_cores / env->nr_dies / env->nr_modules; topo_info.threads_per_core = cs->nr_threads; - cpus_per_pkg = topo_info.dies_per_pkg * topo_info.cores_per_die * - topo_info.threads_per_core; + cpus_per_pkg = topo_info.dies_per_pkg * topo_info.modules_per_die * + topo_info.cores_per_module * topo_info.threads_per_core;/* Calculate & apply limits for different index ranges */ if (index >=0xC0000000 ) {
@@ -5298,8 +5301,8 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,if (*eax &31 ) {int host_vcpus_per_cache =1 + ((*eax &0x3FFC000 ) >>14 );int vcpus_per_socket = cpus_per_pkg; -int cores_per_socket = topo_info.cores_per_die * - topo_info.dies_per_pkg; +int cores_per_socket = cpus_per_pkg / + topo_info.threads_per_core;if (cores_per_socket >1 ) { *eax &= ~0xFC000000 ; *eax |= (pow2ceil (cores_per_socket) -1 ) <<26 ;
@@ -5483,7 +5486,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,break ;case 1 : *eax =apicid_die_offset (&topo_info); - *ebx = topo_info.cores_per_die * topo_info.threads_per_core; + *ebx = cpus_per_pkg / topo_info.dies_per_pkg; *ecx |=CPUID_TOPOLOGY_LEVEL_CORE ;break ;case 2 :
tests/unit/test-x86-apicid.c +24 -21
94 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH 8/18 i386: Support module_id in X86CPUTopoIDs
In reply to Zhao LiuFrom: Zhuocheng Ding <[email protected]>
Add module_id member in X86CPUTopoIDs.
module_id can be parsed from APIC ID, so before updating the parsing rule of APIC ID, temporarily set the module_id generated in this way to 0.
module_id can be also generated from cpu topology, and before i386 supports "clusters" in smp, the default "clusters per die" is only 1, thus the module_id generated in this way is 0, so that it will not conflict with the module_id generated by APIC ID.
--- hw/i386/x86.c | 17 +++++++++++++++++ include/hw/i386/topology.h | 24 ++++++++++++++++++++---- 2 files changed, 37 insertions(+), 4 deletions(-)
hw/i386/x86.c +17 -0
@@ -361,6 +361,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, topo_ids.die_id = cpu->die_id; topo_ids.core_id = cpu->core_id; topo_ids.smt_id = cpu->thread_id; + +/* +* TODO: This is the temporary initialization for topo_ids.module_id to +* avoid "maybe-uninitialized" compilation errors. Will remove when +* X86CPU supports cluster_id. +*/ + topo_ids.module_id =0 ; + cpu->apic_id =x86_apicid_from_topo_ids (&topo_info, &topo_ids); }
@@ -369,6 +377,11 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev,MachineState *ms =MACHINE (x86ms);x86_topo_ids_from_apicid (cpu->apic_id, &topo_info, &topo_ids); + +/* +* TODO: Before APIC ID supports module level parsing, there's no need +* to expose module_id info. +*/ error_setg(errp, "Invalid CPU [socket: %u, die: %u, core: %u, thread: %u] with" " APIC ID %" PRIu32 ", valid index range 0:%d",
@@ -494,6 +507,10 @@ const CPUArchIdList *x86_possible_cpu_arch_ids(MachineState *ms) ms->possible_cpus->cpus[i].props.has_die_id = true; ms->possible_cpus->cpus[i].props.die_id = topo_ids.die_id; } +if (ms->smp.clusters >1 ) { + ms->possible_cpus->cpus[i].props.has_cluster_id = true; + ms->possible_cpus->cpus[i].props.cluster_id = topo_ids.module_id; + } ms->possible_cpus->cpus[i].props.has_core_id = true; ms->possible_cpus->cpus[i].props.core_id = topo_ids.core_id; ms->possible_cpus->cpus[i].props.has_thread_id = true;
include/hw/i386/topology.h +20 -4
@@ -48,6 +48,7 @@ typedef uint32_t apic_id_t;typedef struct X86CPUTopoIDs {unsigned pkg_id;unsigned die_id; +unsigned module_id;unsigned core_id;unsigned smt_id; }X86CPUTopoIDs ;
@@ -134,12 +135,21 @@ static inline void x86_topo_ids_from_idx(X86CPUTopoInfo *topo_info, X86CPUTopoIDs *topo_ids) {unsigned nr_dies = topo_info->dies_per_pkg; -unsigned nr_cores = topo_info->cores_per_module * - topo_info->modules_per_die; +unsigned nr_modules = topo_info->modules_per_die; +unsigned nr_cores = topo_info->cores_per_module;unsigned nr_threads = topo_info->threads_per_core; - topo_ids->pkg_id = cpu_index / (nr_dies * nr_cores * nr_threads); - topo_ids->die_id = cpu_index / (nr_cores * nr_threads) % nr_dies; +/* +* Currently smp for i386 doesn't support "clusters", modules_per_die is +* only 1. Therefore, the module_id generated from the module topology will +* not conflict with the module_id generated according to the apicid. +*/ + topo_ids->pkg_id = cpu_index / (nr_dies * nr_modules * + nr_cores * nr_threads); + topo_ids->die_id = cpu_index / (nr_modules * nr_cores * + nr_threads) % nr_dies; + topo_ids->module_id = cpu_index / (nr_cores * nr_threads) % + nr_modules; topo_ids->core_id = cpu_index / nr_threads % nr_cores; topo_ids->smt_id = cpu_index % nr_threads; }
@@ -156,6 +166,12 @@ static inline void x86_topo_ids_from_apicid(apic_id_t apicid, topo_ids->core_id = (apicid >>apicid_core_offset (topo_info)) & ~(0xFFFFFFFFUL <<apicid_core_width (topo_info)); +/* +* TODO: This is the temporary initialization for topo_ids.module_id to +* avoid "maybe-uninitialized" compilation errors. Will remove when APIC +* ID supports module level parsing. +*/ + topo_ids->module_id =0 ; topo_ids->die_id = (apicid >>apicid_die_offset (topo_info)) & ~(0xFFFFFFFFUL <<apicid_die_width (topo_info));
Signature · 1 line
2.34.1
PATCH 9/18 i386: Fix comment style in topology.h
In reply to Zhao LiuFrom: Zhao Liu <[email protected]>
For function comments in this file, keep the comment style consistent with other places.
--- include/hw/i386/topology.h | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-)
include/hw/i386/topology.h +17 -16
@@ -24,7 +24,8 @@#ifndef HW_I386_TOPOLOGY_H #define HW_I386_TOPOLOGY_H -/* This file implements the APIC-ID-based CPU topology enumeration logic, +/* +* This file implements the APIC-ID-based CPU topology enumeration logic, * documented at the following document: * Intel® 64 Architecture Processor Topology Enumeration * http://software.intel.com/en-us/articles/intel-64-architecture-processor-topology-enumeration/
@@ -41,7 +42,8 @@#include "qemu/bitops.h" -/* APIC IDs can be 32-bit, but beware: APIC IDs > 255 require x2APIC support +/* +* APIC IDs can be 32-bit, but beware: APIC IDs > 255 require x2APIC support */ typedef uint32_t apic_id_t ;
@@ -60,8 +62,7 @@ typedef struct X86CPUTopoInfo {unsigned threads_per_core; } X86CPUTopoInfo; -/* Return the bit width needed for 'count' IDs -*/ +/* Return the bit width needed for 'count' IDs */ static unsigned apicid_bitwidth_for_count (unsigned count) {g_assert (count >=1 );
@@ -69,15 +70,13 @@ static unsigned apicid_bitwidth_for_count(unsigned count)return count ?32 -clz32 (count) :0 ; } -/* Bit width of the SMT_ID (thread ID) field on the APIC ID -*/ +/* Bit width of the SMT_ID (thread ID) field on the APIC ID */ static inline unsigned apicid_smt_width (X86CPUTopoInfo *topo_info) {return apicid_bitwidth_for_count (topo_info->threads_per_core); } -/* Bit width of the Core_ID field -*/ +/* Bit width of the Core_ID field */ static inline unsigned apicid_core_width (X86CPUTopoInfo *topo_info) {/*
@@ -94,8 +93,7 @@ static inline unsigned apicid_die_width(X86CPUTopoInfo *topo_info)return apicid_bitwidth_for_count (topo_info->dies_per_pkg); } -/* Bit offset of the Core_ID field -*/ +/* Bit offset of the Core_ID field */ static inline unsigned apicid_core_offset (X86CPUTopoInfo *topo_info) {return apicid_smt_width (topo_info);
@@ -107,14 +105,14 @@ static inline unsigned apicid_die_offset(X86CPUTopoInfo *topo_info)return apicid_core_offset (topo_info) +apicid_core_width (topo_info); } -/* Bit offset of the Pkg_ID (socket ID) field -*/ +/* Bit offset of the Pkg_ID (socket ID) field */ static inline unsigned apicid_pkg_offset (X86CPUTopoInfo *topo_info) {return apicid_die_offset (topo_info) +apicid_die_width (topo_info); } -/* Make APIC ID for the CPU based on Pkg_ID, Core_ID, SMT_ID +/* +* Make APIC ID for the CPU based on Pkg_ID, Core_ID, SMT_ID * * The caller must make sure core_id < nr_cores and smt_id < nr_threads. */
@@ -127,7 +125,8 @@ static inline apic_id_t x86_apicid_from_topo_ids(X86CPUTopoInfo *topo_info, topo_ids->smt_id; } -/* Calculate thread/core/package IDs for a specific topology, +/* +* Calculate thread/core/package IDs for a specific topology, * based on (contiguous) CPU index */ static inline void x86_topo_ids_from_idx(X86CPUTopoInfo *topo_info,
@@ -154,7 +153,8 @@ static inline void x86_topo_ids_from_idx(X86CPUTopoInfo *topo_info, topo_ids->smt_id = cpu_index % nr_threads; } -/* Calculate thread/core/package IDs for a specific topology, +/* +* Calculate thread/core/package IDs for a specific topology, * based on APIC ID */ static inline void x86_topo_ids_from_apicid(apic_id_t apicid,
@@ -178,7 +178,8 @@ static inline void x86_topo_ids_from_apicid(apic_id_t apicid, topo_ids->pkg_id = apicid >>apicid_pkg_offset (topo_info); } -/* Make APIC ID for the CPU 'cpu_index' +/* +* Make APIC ID for the CPU 'cpu_index' * * 'cpu_index' is a sequential, contiguous ID for the CPU. */
Signature · 1 line
2.34.1
PATCH 10/18 i386: Update APIC ID parsing rule to support module level
In reply to Zhao LiuFrom: Zhuocheng Ding <[email protected]>
Add the module level parsing support for APIC ID.
With this support, now the conversion between X86CPUTopoIDs, X86CPUTopoInfo and APIC ID is completed.
--- hw/i386/x86.c | 19 ++++++++----------- include/hw/i386/topology.h | 36 ++++++++++++++++++------------------ 2 files changed, 26 insertions(+), 29 deletions(-)
hw/i386/x86.c +8 -11
@@ -310,11 +310,11 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev,/* * If APIC ID is not set, -* set it based on socket/die/core/thread properties. +* set it based on socket/die/cluster/core/thread properties. */ if (cpu->apic_id ==UNASSIGNED_APIC_ID ) { -int max_socket = (ms->smp.max_cpus -1 ) / - smp_threads / smp_cores / ms->smp.dies; +int max_socket = (ms->smp.max_cpus -1 ) / smp_threads / smp_cores / + ms->smp.clusters / ms->smp.dies;/* * die-id was optional in QEMU 4.0 and older, so keep it optional
@@ -378,15 +378,12 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev,x86_topo_ids_from_apicid (cpu->apic_id, &topo_info, &topo_ids); -/* -* TODO: Before APIC ID supports module level parsing, there's no need -* to expose module_id info. -*/ error_setg (errp, -"Invalid CPU [socket: %u, die: %u, core: %u, thread: %u] with" -" APIC ID %" PRIu32", valid index range 0:%d" , - topo_ids.pkg_id, topo_ids.die_id, topo_ids.core_id, topo_ids.smt_id, - cpu->apic_id, ms->possible_cpus->len -1 ); +"Invalid CPU [socket: %u, die: %u, module: %u, core: %u, thread: %u]" +" with APIC ID %" PRIu32", valid index range 0:%d" , + topo_ids.pkg_id, topo_ids.die_id, topo_ids.module_id, + topo_ids.core_id, topo_ids.smt_id, cpu->apic_id, + ms->possible_cpus->len -1 );return ; }
include/hw/i386/topology.h +18 -18
@@ -79,12 +79,13 @@ static inline unsigned apicid_smt_width(X86CPUTopoInfo *topo_info)/* Bit width of the Core_ID field */ static inline unsigned apicid_core_width (X86CPUTopoInfo *topo_info) { -/* -* TODO: Will separate module info from core_width when update -* APIC ID with module level. -*/ -return apicid_bitwidth_for_count (topo_info->cores_per_module * - topo_info->modules_per_die); +return apicid_bitwidth_for_count (topo_info->cores_per_module); +} + +/* Bit width of the Module_ID (cluster ID) field */ +static inline unsigned apicid_module_width (X86CPUTopoInfo *topo_info) +{ +return apicid_bitwidth_for_count (topo_info->modules_per_die); }/* Bit width of the Die_ID field */
@@ -99,10 +100,16 @@ static inline unsigned apicid_core_offset(X86CPUTopoInfo *topo_info)return apicid_smt_width (topo_info); } +/* Bit offset of the Module_ID (cluster ID) field */ +static inline unsigned apicid_module_offset (X86CPUTopoInfo *topo_info) +{ +return apicid_core_offset (topo_info) +apicid_core_width (topo_info); +} +/* Bit offset of the Die_ID field */ static inline unsigned apicid_die_offset (X86CPUTopoInfo *topo_info) { -return apicid_core_offset (topo_info) +apicid_core_width (topo_info); +return apicid_module_offset (topo_info) +apicid_module_width (topo_info); }/* Bit offset of the Pkg_ID (socket ID) field */
@@ -121,6 +128,7 @@ static inline apic_id_t x86_apicid_from_topo_ids(X86CPUTopoInfo *topo_info, {return (topo_ids->pkg_id <<apicid_pkg_offset (topo_info)) | (topo_ids->die_id <<apicid_die_offset (topo_info)) | + (topo_ids->module_id <<apicid_module_offset (topo_info)) | (topo_ids->core_id <<apicid_core_offset (topo_info)) | topo_ids->smt_id; }
@@ -138,11 +146,6 @@ static inline void x86_topo_ids_from_idx(X86CPUTopoInfo *topo_info,unsigned nr_cores = topo_info->cores_per_module;unsigned nr_threads = topo_info->threads_per_core; -/* -* Currently smp for i386 doesn't support "clusters", modules_per_die is -* only 1. Therefore, the module_id generated from the module topology will -* not conflict with the module_id generated according to the apicid. -*/ topo_ids->pkg_id = cpu_index / (nr_dies * nr_modules * nr_cores * nr_threads); topo_ids->die_id = cpu_index / (nr_modules * nr_cores *
@@ -166,12 +169,9 @@ static inline void x86_topo_ids_from_apicid(apic_id_t apicid, topo_ids->core_id = (apicid >>apicid_core_offset (topo_info)) & ~(0xFFFFFFFFUL <<apicid_core_width (topo_info)); -/* -* TODO: This is the temporary initialization for topo_ids.module_id to -* avoid "maybe-uninitialized" compilation errors. Will remove when APIC -* ID supports module level parsing. -*/ - topo_ids->module_id =0 ; + topo_ids->module_id = + (apicid >>apicid_module_offset (topo_info)) & + ~(0xFFFFFFFFUL <<apicid_module_width (topo_info)); topo_ids->die_id = (apicid >>apicid_die_offset (topo_info)) & ~(0xFFFFFFFFUL <<apicid_die_width (topo_info));
Signature · 1 line
2.34.1
PATCH 11/18 i386/cpu: Introduce cluster-id to X86CPU
In reply to Zhao LiuFrom: Zhuocheng Ding <[email protected]>
We introduce cluster-id other than module-id to be consistent with CpuInstanceProperties.cluster-id, and this avoids the confusion of parameter names when hotplugging.
Following the legacy smp check rules, also add the cluster_id validity into x86_cpu_pre_plug().
--- hw/i386/x86.c | 33 +++++++++++++++++++++++++-------- target/i386/cpu.c | 2 ++ target/i386/cpu.h | 1 + 3 files changed, 28 insertions(+), 8 deletions(-)
hw/i386/x86.c +25 -8
@@ -324,6 +324,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, cpu->die_id =0 ; } +/* +* cluster-id was optional in QEMU 8.0 and older, so keep it optional +* if there's only one cluster per die. +*/ +if (cpu->cluster_id <0 && ms->smp.clusters ==1 ) { + cpu->cluster_id =0 ; + } +if (cpu->socket_id <0 ) {error_setg (errp,"CPU socket-id is not set" );return ;
@@ -340,6 +348,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, cpu->die_id, ms->smp.dies - 1);return ; } +if (cpu->cluster_id <0 ) { +error_setg (errp,"CPU cluster-id is not set" ); +return ; + }else if (cpu->cluster_id > ms->smp.clusters -1 ) { +error_setg (errp,"Invalid CPU cluster-id: %u must be in range 0:%u" , + cpu->cluster_id, ms->smp.clusters -1 ); +return ; + }if (cpu->core_id <0 ) {error_setg (errp,"CPU core-id is not set" );return ;
@@ -359,16 +375,9 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, topo_ids.pkg_id = cpu->socket_id; topo_ids.die_id = cpu->die_id; + topo_ids.module_id = cpu->cluster_id; topo_ids.core_id = cpu->core_id; topo_ids.smt_id = cpu->thread_id; - -/* -* TODO: This is the temporary initialization for topo_ids.module_id to -* avoid "maybe-uninitialized" compilation errors. Will remove when -* X86CPU supports cluster_id. -*/ - topo_ids.module_id =0 ; - cpu->apic_id =x86_apicid_from_topo_ids (&topo_info, &topo_ids); }
@@ -415,6 +424,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, } cpu->die_id = topo_ids.die_id; +if (cpu->cluster_id !=-1 && cpu->cluster_id != topo_ids.module_id) { +error_setg (errp,"property cluster-id: %u doesn't match set apic-id:" +" 0x%x (cluster-id: %u)" , cpu->cluster_id, cpu->apic_id, + topo_ids.module_id); +return ; + } + cpu->cluster_id = topo_ids.module_id; +if (cpu->core_id !=-1 && cpu->core_id != topo_ids.core_id) { error_setg(errp, "property core-id: %u doesn't match set apic-id:" " 0x%x (core-id: %u)", cpu->core_id, cpu->apic_id,
target/i386/cpu.c +2 -0
@@ -6980,12 +6980,14 @@ static Property x86_cpu_properties[] = {DEFINE_PROP_UINT32 ("apic-id" ,X86CPU , apic_id,0 ),DEFINE_PROP_INT32 ("thread-id" ,X86CPU , thread_id,0 ),DEFINE_PROP_INT32 ("core-id" ,X86CPU , core_id,0 ), +DEFINE_PROP_INT32 ("cluster-id" ,X86CPU , cluster_id,0 ),DEFINE_PROP_INT32 ("die-id" ,X86CPU , die_id,0 ),DEFINE_PROP_INT32 ("socket-id" ,X86CPU , socket_id,0 ), #elseDEFINE_PROP_UINT32 ("apic-id" ,X86CPU , apic_id,UNASSIGNED_APIC_ID ),DEFINE_PROP_INT32 ("thread-id" ,X86CPU , thread_id,-1 ),DEFINE_PROP_INT32 ("core-id" ,X86CPU , core_id,-1 ), +DEFINE_PROP_INT32 ("cluster-id" ,X86CPU , cluster_id,-1 ),DEFINE_PROP_INT32 ("die-id" ,X86CPU , die_id,-1 ), DEFINE_PROP_INT32("socket-id", X86CPU, socket_id, -1), #endif
target/i386/cpu.h +1 -0
@@ -1966,6 +1966,7 @@ struct ArchCPU {int32_t node_id;/* NUMA node this CPU belongs to */ int32_t socket_id;int32_t die_id; +int32_t cluster_id;int32_t core_id;int32_t thread_id;
Signature · 1 line
2.34.1
PATCH 12/18 tests: Add test case of APIC ID for module level parsing
In reply to Zhao LiuFrom: Zhuocheng Ding <[email protected]>
After i386 supports module level, it's time to add the test for module level's parsing.
--- tests/unit/test-x86-apicid.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)
tests/unit/test-x86-apicid.c +15 -4
@@ -37,6 +37,7 @@ static void test_topo_bits(void) topo_info = (X86CPUTopoInfo ) {1 ,1 ,1 ,1 }; g_assert_cmpuint(apicid_smt_width(&topo_info), ==, 0); g_assert_cmpuint(apicid_core_width(&topo_info), ==, 0); + g_assert_cmpuint(apicid_module_width(&topo_info), ==, 0); g_assert_cmpuint(apicid_die_width(&topo_info), ==, 0); topo_info = (X86CPUTopoInfo ) {1 ,1 ,1 ,1 };
@@ -74,13 +75,22 @@ static void test_topo_bits(void) topo_info = (X86CPUTopoInfo ) {1 ,1 ,33 ,2 }; g_assert_cmpuint(apicid_core_width(&topo_info), ==, 6); - topo_info = (X86CPUTopoInfo ) {1 ,1 ,30 ,2 }; + topo_info = (X86CPUTopoInfo ) {1 ,6 ,30 ,2 }; + g_assert_cmpuint(apicid_module_width(&topo_info), ==, 3); + topo_info = (X86CPUTopoInfo ) {1 ,7 ,30 ,2 }; + g_assert_cmpuint(apicid_module_width(&topo_info), ==, 3); + topo_info = (X86CPUTopoInfo ) {1 ,8 ,30 ,2 }; + g_assert_cmpuint(apicid_module_width(&topo_info), ==, 3); + topo_info = (X86CPUTopoInfo ) {1 ,9 ,30 ,2 }; + g_assert_cmpuint(apicid_module_width(&topo_info), ==, 4); + + topo_info = (X86CPUTopoInfo ) {1 ,6 ,30 ,2 }; g_assert_cmpuint(apicid_die_width(&topo_info), ==, 0); - topo_info = (X86CPUTopoInfo ) {2 ,1 ,30 ,2 }; + topo_info = (X86CPUTopoInfo ) {2 ,6 ,30 ,2 }; g_assert_cmpuint(apicid_die_width(&topo_info), ==, 1); - topo_info = (X86CPUTopoInfo ) {3 ,1 ,30 ,2 }; + topo_info = (X86CPUTopoInfo ) {3 ,6 ,30 ,2 }; g_assert_cmpuint(apicid_die_width(&topo_info), ==, 2); - topo_info = (X86CPUTopoInfo ) {4 ,1 ,30 ,2 }; + topo_info = (X86CPUTopoInfo ) {4 ,6 ,30 ,2 }; g_assert_cmpuint(apicid_die_width(&topo_info), ==, 2);/* build a weird topology and see if IDs are calculated correctly
@@ -91,6 +101,7 @@ static void test_topo_bits(void) topo_info = (X86CPUTopoInfo ) {1 ,1 ,6 ,3 }; g_assert_cmpuint(apicid_smt_width(&topo_info), ==, 2); g_assert_cmpuint(apicid_core_offset(&topo_info), ==, 2); + g_assert_cmpuint(apicid_module_offset(&topo_info), ==, 5); g_assert_cmpuint(apicid_die_offset(&topo_info), ==, 5); g_assert_cmpuint(apicid_pkg_offset(&topo_info), ==, 5);
Signature · 1 line
2.34.1
PATCH 13/18 hw/i386/pc: Support smp.clusters for x86 PC machine
In reply to Zhao LiuFrom: Zhuocheng Ding <[email protected]>
As module-level topology support is added to X86CPU, now we can enable the support for the cluster parameter on PC machines. With this support, we can define a 5-level x86 CPU topology with "-smp":
-smp cpus=*,maxcpus=*,sockets=*,dies=*,clusters=*,cores=*,threads=*.
Additionally, add the 5-level topology example in description of "-smp".
--- hw/i386/pc.c | 1 + qemu-options.hx | 10 +++++----- 2 files changed, 6 insertions(+), 5 deletions(-)
hw/i386/pc.c +1 -0
@@ -1929,6 +1929,7 @@ static void pc_machine_class_init(ObjectClass *oc, void *data) mc->default_cpu_type =TARGET_DEFAULT_CPU_TYPE ; mc->nvdimm_supported = true; mc->smp_props.dies_supported = true; + mc->smp_props.clusters_supported = true; mc->default_ram_id ="pc.ram" ; object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size",
qemu-options.hx +5 -5
@@ -312,14 +312,14 @@ SRST -smp 8,sockets=2,cores=2,threads=2,maxcpus=8 The following sub-option defines a CPU topology hierarchy (2 sockets - totally on the machine, 2 dies per socket, 2 cores per die, 2 threads - per core) for PC machines which support sockets/dies/cores/threads. - Some members of the option can be omitted but their values will be - automatically computed: + totally on the machine, 2 dies per socket, 2 clusters per die, 2 cores per + cluster, 2 threads per core) for PC machines which support sockets/dies + /clusters/cores/threads. Some members of the option can be omitted but + their values will be automatically computed: :: - -smp 16,sockets=2,dies=2,cores=2,threads=2,maxcpus=16 + -smp 32,sockets=2,dies=2,clusters=2,cores=2,threads=2,maxcpus=32 The following sub-option defines a CPU topology hierarchy (2 sockets totally on the machine, 2 clusters per socket, 2 cores per cluster,
Signature · 1 line
2.34.1
PATCH 14/18 i386: Add cache topology info in CPUCacheInfo
In reply to Zhao LiuFrom: Zhao Liu <[email protected]>
Currently, by default, the cache topology is encoded as:
1. i/d cache is shared in one core.
2. L2 cache is shared in one core.
3. L3 cache is shared in one die.
This default general setting has caused a misunderstanding, that is, the cache topology is completely equated with a specific cpu topology, such as the connection between L2 cache and core level, and the connection between L3 cache and die level.
In fact, the settings of these topologies depend on the specific platform and are not static. For example, on Alder Lake-P, every four Atom cores share the same L2 cache.
Thus, we should explicitly define the corresponding cache topology for different cache models to increase scalability.
Except legacy_l2_cache_cpuid2 (its default topo level is INVALID), explicitly set the corresponding topology level for all other cache models. In order to be compatible with the existing cache topology, set the CORE level for the i/d cache, set the CORE level for L2 cache, and set the DIE level for L3 cache.
The field for CPUID[4].EAX[bits 25:14] or CPUID[0x8000001D].EAX[bits 25:14] will be set based on CPUCacheInfo.share_level.
--- target/i386/cpu.c | 19 +++++++++++++++++++ target/i386/cpu.h | 16 ++++++++++++++++ 2 files changed, 35 insertions(+)
target/i386/cpu.c +19 -0
@@ -433,6 +433,7 @@ static CPUCacheInfo legacy_l1d_cache = { .sets = 64, .partitions = 1, .no_invd_sharing = true, + .share_level = CORE, };/*FIXME: CPUID leaf 0x80000005 is inconsistent with leaves 2 & 4 */
@@ -447,6 +448,7 @@ static CPUCacheInfo legacy_l1d_cache_amd = { .partitions = 1, .lines_per_tag = 1, .no_invd_sharing = true, + .share_level = CORE, };/* L1 instruction cache: */
@@ -460,6 +462,7 @@ static CPUCacheInfo legacy_l1i_cache = { .sets = 64, .partitions = 1, .no_invd_sharing = true, + .share_level = CORE, };/*FIXME: CPUID leaf 0x80000005 is inconsistent with leaves 2 & 4 */
@@ -474,6 +477,7 @@ static CPUCacheInfo legacy_l1i_cache_amd = { .partitions = 1, .lines_per_tag = 1, .no_invd_sharing = true, + .share_level = CORE, };/* Level 2 unified cache: */
@@ -487,6 +491,7 @@ static CPUCacheInfo legacy_l2_cache = { .sets = 4096, .partitions = 1, .no_invd_sharing = true, + .share_level = CORE, };/*FIXME: CPUID leaf 2 descriptor is inconsistent with CPUID leaf 4 */
@@ -509,6 +514,7 @@ static CPUCacheInfo legacy_l2_cache_amd = { .associativity = 16, .sets = 512, .partitions = 1, + .share_level = CORE, };/* Level 3 unified cache: */
@@ -524,6 +530,7 @@ static CPUCacheInfo legacy_l3_cache = { .self_init = true, .inclusive = true, .complex_indexing = true, + .share_level = DIE, };/* TLB definitions: */
@@ -1668,6 +1675,7 @@ static const CPUCaches epyc_cache_info = { .lines_per_tag = 1, .self_init = 1, .no_invd_sharing = true, + .share_level = CORE, }, .l1i_cache = &(CPUCacheInfo ) { .type =INSTRUCTION_CACHE ,
@@ -1680,6 +1688,7 @@ static const CPUCaches epyc_cache_info = { .lines_per_tag = 1, .self_init = 1, .no_invd_sharing = true, + .share_level = CORE, }, .l2_cache = &(CPUCacheInfo ) { .type =UNIFIED_CACHE ,
@@ -1690,6 +1699,7 @@ static const CPUCaches epyc_cache_info = { .partitions = 1, .sets = 1024, .lines_per_tag = 1, + .share_level = CORE, }, .l3_cache = &(CPUCacheInfo ) { .type =UNIFIED_CACHE ,
@@ -1703,6 +1713,7 @@ static const CPUCaches epyc_cache_info = { .self_init = true, .inclusive = true, .complex_indexing = true, + .share_level = DIE, }, };
@@ -1718,6 +1729,7 @@ static const CPUCaches epyc_rome_cache_info = { .lines_per_tag = 1, .self_init = 1, .no_invd_sharing = true, + .share_level = CORE, }, .l1i_cache = &(CPUCacheInfo ) { .type =INSTRUCTION_CACHE ,
@@ -1730,6 +1742,7 @@ static const CPUCaches epyc_rome_cache_info = { .lines_per_tag = 1, .self_init = 1, .no_invd_sharing = true, + .share_level = CORE, }, .l2_cache = &(CPUCacheInfo ) { .type =UNIFIED_CACHE ,
@@ -1740,6 +1753,7 @@ static const CPUCaches epyc_rome_cache_info = { .partitions = 1, .sets = 1024, .lines_per_tag = 1, + .share_level = CORE, }, .l3_cache = &(CPUCacheInfo ) { .type =UNIFIED_CACHE ,
@@ -1753,6 +1767,7 @@ static const CPUCaches epyc_rome_cache_info = { .self_init = true, .inclusive = true, .complex_indexing = true, + .share_level = DIE, }, };
@@ -1768,6 +1783,7 @@ static const CPUCaches epyc_milan_cache_info = { .lines_per_tag = 1, .self_init = 1, .no_invd_sharing = true, + .share_level = CORE, }, .l1i_cache = &(CPUCacheInfo ) { .type =INSTRUCTION_CACHE ,
@@ -1780,6 +1796,7 @@ static const CPUCaches epyc_milan_cache_info = { .lines_per_tag = 1, .self_init = 1, .no_invd_sharing = true, + .share_level = CORE, }, .l2_cache = &(CPUCacheInfo ) { .type =UNIFIED_CACHE ,
@@ -1790,6 +1807,7 @@ static const CPUCaches epyc_milan_cache_info = { .partitions = 1, .sets = 1024, .lines_per_tag = 1, + .share_level = CORE, }, .l3_cache = &(CPUCacheInfo ) { .type =UNIFIED_CACHE ,
@@ -1803,6 +1821,7 @@ static const CPUCaches epyc_milan_cache_info = { .self_init = true, .inclusive = true, .complex_indexing = true, + .share_level = DIE, }, };
target/i386/cpu.h +16 -0
@@ -1476,6 +1476,15 @@ enum CacheType {UNIFIED_CACHE }; +enum CPUTopoLevel { +INVALID =0 , +SMT , +CORE , +MODULE , +DIE , +PACKAGE , +}; + typedef struct CPUCacheInfo { enum CacheType type; uint8_t level;
@@ -1517,6 +1526,13 @@ typedef struct CPUCacheInfo {* address bits. CPUID[4].EDX[bit 2]. */ bool complex_indexing; + +/* +* Cache Topology. The level that cache is shared in. +* Used to encode CPUID[4].EAX[bits 25:14] or +* CPUID[0x8000001D].EAX[bits 25:14]. +*/ +enum CPUTopoLevel share_level; } CPUCacheInfo;
Signature · 1 line
2.34.1
PATCH 15/18 i386: Use CPUCacheInfo.share_level to encode CPUID[4].EAX[bits 25:14]
In reply to Zhao LiuFrom: Zhao Liu <[email protected]>
CPUID[4].EAX[bits 25:14] is used to represent the cache topology for intel CPUs.
After cache models have topology information, we can use CPUCacheInfo.share_level to decide which topology level to be encoded into CPUID[4].EAX[bits 25:14].
Additionally, since maximum_processor_id (original "num_apic_ids") is parsed based on cpu topology levels, which are verified when parsing smp, it's no need to check this value by "assert(num_apic_ids > 0)" again, so remove this assert.
--- target/i386/cpu.c | 55 +++++++++++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 19 deletions(-)
target/i386/cpu.c +36 -19
@@ -231,22 +231,50 @@ static uint8_t cpuid2_cache_descriptor(CPUCacheInfo *cache) ((t) == UNIFIED_CACHE) ? CACHE_TYPE_UNIFIED : \ 0 /* Invalid value */) +static uint32_t max_processor_ids_for_cache (CPUCacheInfo *cache, +X86CPUTopoInfo *topo_info) +{ +uint32_t num_ids =0 ; + +switch (cache->share_level) { +case CORE : + num_ids =1 <<apicid_core_offset (topo_info); +break ; +case DIE : + num_ids =1 <<apicid_die_offset (topo_info); +break ; +default : +/* +* Currently there is no use case for SMT, MODULE and PACKAGE, so use +* assert directly to facilitate debugging. +*/ +g_assert_not_reached (); + } + +return num_ids -1 ; +} + +static uint32_t max_core_ids_in_package (X86CPUTopoInfo *topo_info) +{ +uint32_t num_cores =1 << (apicid_pkg_offset (topo_info) - +apicid_core_offset (topo_info)); +return num_cores -1 ; +}/* Encode cache info for CPUID[4] */ static void encode_cache_cpuid4 (CPUCacheInfo *cache, -int num_apic_ids,int num_cores, +X86CPUTopoInfo *topo_info,uint32_t *eax,uint32_t *ebx,uint32_t *ecx,uint32_t *edx) {assert (cache->size == cache->line_size * cache->associativity * cache->partitions * cache->sets); -assert (num_apic_ids >0 ); *eax =CACHE_TYPE (cache->type) |CACHE_LEVEL (cache->level) | (cache->self_init ?CACHE_SELF_INIT_LEVEL :0 ) | - ((num_cores -1 ) <<26 ) | - ((num_apic_ids -1 ) <<14 ); + (max_core_ids_in_package (topo_info) <<26 ) | + (max_processor_ids_for_cache (cache, topo_info) <<14 );assert (cache->line_size >0 );assert (cache->partitions >0 );
@@ -5335,38 +5363,27 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, *eax = *ebx = *ecx = *edx =0 ; }else { *eax =0 ; -int addressable_cores_offset =apicid_pkg_offset (&topo_info) - -apicid_core_offset (&topo_info); -int core_offset, die_offset;switch (count) {case 0 :/* L1 dcache info */ - core_offset =apicid_core_offset (&topo_info);encode_cache_cpuid4 (env->cache_info_cpuid4.l1d_cache, - (1 << core_offset), - (1 << addressable_cores_offset), + &topo_info, eax, ebx, ecx, edx);break ;case 1 :/* L1 icache info */ - core_offset =apicid_core_offset (&topo_info);encode_cache_cpuid4 (env->cache_info_cpuid4.l1i_cache, - (1 << core_offset), - (1 << addressable_cores_offset), + &topo_info, eax, ebx, ecx, edx);break ;case 2 :/* L2 cache info */ - core_offset =apicid_core_offset (&topo_info);encode_cache_cpuid4 (env->cache_info_cpuid4.l2_cache, - (1 << core_offset), - (1 << addressable_cores_offset), + &topo_info, eax, ebx, ecx, edx);break ;case 3 :/* L3 cache info */ - die_offset =apicid_die_offset (&topo_info);if (cpu->enable_l3_cache) {encode_cache_cpuid4 (env->cache_info_cpuid4.l3_cache, - (1 << die_offset), - (1 << addressable_cores_offset), + &topo_info, eax, ebx, ecx, edx);break ; }
Signature · 1 line
2.34.1
PATCH 16/18 i386: Fix NumSharingCache for CPUID[0x8000001D].EAX[bits 25:14]
In reply to Zhao LiuFrom: Zhao Liu <[email protected]>
From AMD's APM, NumSharingCache (CPUID[0x8000001D].EAX[bits 25:14]) means [1]:
The number of logical processors sharing this cache is the value of this field incremented by 1. To determine which logical processors are sharing a cache, determine a Share Id for each processor as follows:
ShareId = LocalApicId >> log2(NumSharingCache+1)
Logical processors with the same ShareId then share a cache. If NumSharingCache+1 is not a power of two, round it up to the next power of two.
From the description above, the caculation of this feild should be same as CPUID[4].EAX[bits 25:14] for intel cpus. So also use the offsets of APIC ID to caculate this field.
Note: I don't have the hardware available, hope someone can help me to confirm whether this calculation is correct, thanks!
[1]: APM, vol.3, appendix.E.4.15 Function 8000_001Dh--Cache Topology
Information
--- target/i386/cpu.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
target/i386/cpu.c +4 -6
@@ -355,7 +355,7 @@ static void encode_cache_cpuid8000001d(CPUCacheInfo *cache, uint32_t *eax, uint32_t *ebx, uint32_t *ecx, uint32_t *edx) { - uint32_t l3_threads; + uint32_t sharing_apic_ids;assert (cache->size == cache->line_size * cache->associativity * cache->partitions * cache->sets);
@@ -364,13 +364,11 @@ static void encode_cache_cpuid8000001d(CPUCacheInfo *cache,/* L3 is shared among multiple cores */ if (cache->level ==3 ) { - l3_threads = topo_info->modules_per_die * - topo_info->cores_per_module * - topo_info->threads_per_core; - *eax |= (l3_threads -1 ) <<14 ; + sharing_apic_ids =1 <<apicid_die_offset (topo_info); }else { - *eax |= ((topo_info->threads_per_core -1 ) <<14 ); + sharing_apic_ids =1 <<apicid_core_offset (topo_info); } + *eax |= (sharing_apic_ids -1 ) <<14 ;assert (cache->line_size >0 );assert (cache->partitions >0 );
Signature · 1 line
2.34.1
PATCH 17/18 i386: Use CPUCacheInfo.share_level to encode CPUID[0x8000001D].EAX[bits 25:14]
In reply to Zhao LiuFrom: Zhao Liu <[email protected]>
CPUID[0x8000001D].EAX[bits 25:14] is used to represent the cache topology for amd CPUs.
After cache models have topology information, we can use CPUCacheInfo.share_level to decide which topology level to be encoded into CPUID[0x8000001D].EAX[bits 25:14].
--- target/i386/cpu.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)
target/i386/cpu.c +1 -9
@@ -355,20 +355,12 @@ static void encode_cache_cpuid8000001d(CPUCacheInfo *cache, uint32_t *eax, uint32_t *ebx, uint32_t *ecx, uint32_t *edx) { - uint32_t sharing_apic_ids; assert(cache->size == cache->line_size * cache->associativity * cache->partitions * cache->sets); *eax =CACHE_TYPE (cache->type) |CACHE_LEVEL (cache->level) | (cache->self_init ?CACHE_SELF_INIT_LEVEL :0 ); - -/* L3 is shared among multiple cores */ -if (cache->level ==3 ) { - sharing_apic_ids =1 <<apicid_die_offset (topo_info); - }else { - sharing_apic_ids =1 <<apicid_core_offset (topo_info); - } - *eax |= (sharing_apic_ids -1 ) <<14 ; + *eax |=max_processor_ids_for_cache (cache, topo_info) <<14 ;assert (cache->line_size >0 );assert (cache->partitions >0 );
Signature · 1 line
2.34.1
PATCH 18/18 i386: Add new property to control L2 cache topo in CPUID.04H
In reply to Zhao LiuFrom: Zhao Liu <[email protected]>
The property x-l2-cache-topo will be used to change the L2 cache topology in CPUID.04H.
Now it allows user to set the L2 cache is shared in core level or cluster level.
If user passes "-cpu x-l2-cache-topo=[core|cluster]" then older L2 cache topology will be overrided by the new topology setting.
Here we expose to user "cluster" instead of "module", to be consistent with "cluster-id" naming.
Since CPUID.04H is used by intel CPUs, this property is available on intel CPUs as for now.
When necessary, it can be extended to CPUID.8000001DH for amd CPUs.
--- target/i386/cpu.c | 33 ++++++++++++++++++++++++++++++++- target/i386/cpu.h | 2 ++ 2 files changed, 34 insertions(+), 1 deletion(-)
target/i386/cpu.c +32 -1
@@ -240,12 +240,15 @@ static uint32_t max_processor_ids_for_cache(CPUCacheInfo *cache,case CORE : num_ids =1 <<apicid_core_offset (topo_info);break ; +case MODULE : + num_ids =1 <<apicid_module_offset (topo_info); +break ;case DIE : num_ids =1 <<apicid_die_offset (topo_info);break ;default :/* -* Currently there is no use case for SMT, MODULE and PACKAGE, so use +* Currently there is no use case for SMT and PACKAGE, so use * assert directly to facilitate debugging. */ g_assert_not_reached ();
@@ -6633,6 +6636,33 @@ static void x86_cpu_realizefn(DeviceState *dev, Error **errp) env->cache_info_amd.l3_cache = &legacy_l3_cache; } +if (cpu->l2_cache_topo_level) { +/* +* FIXME: Currently only supports changing CPUID[4] (for intel), and +* will support changing CPUID[0x8000001D] when necessary. +*/ +if (!IS_INTEL_CPU (env)) { +error_setg (errp,"only intel cpus supports x-l2-cache-topo" ); +return ; + } + +if (!strcmp (cpu->l2_cache_topo_level,"core" )) { + env->cache_info_cpuid4.l2_cache->share_level =CORE ; + }else if (!strcmp (cpu->l2_cache_topo_level,"cluster" )) { +/* +* We expose to users "cluster" instead of "module", to be +* consistent with "cluster-id" naming. +*/ + env->cache_info_cpuid4.l2_cache->share_level =MODULE ; + }else { +error_setg (errp, +"x-l2-cache-topo doesn't support '%s', " +"and it only supports 'core' or 'cluster'" , + cpu->l2_cache_topo_level); +return ; + } + } +#ifndef CONFIG_USER_ONLY MachineState *ms =MACHINE (qdev_get_machine ());qemu_register_reset (x86_cpu_machine_reset_cb, cpu);
@@ -7135,6 +7165,7 @@ static Property x86_cpu_properties[] = { false),DEFINE_PROP_BOOL ("x-intel-pt-auto-level" ,X86CPU , intel_pt_auto_level, true), +DEFINE_PROP_STRING ("x-l2-cache-topo" ,X86CPU , l2_cache_topo_level), DEFINE_PROP_END_OF_LIST() };
target/i386/cpu.h +2 -0
@@ -1987,6 +1987,8 @@ struct ArchCPU {int32_t thread_id;int32_t hv_max_vps; + +char *l2_cache_topo_level; };
Signature · 1 line
2.34.1