Skip to contentSkip to conversation

how to know a hard drive will mix well

DISCUSSION David T-G 3 participants 8 messages Feb 2, 2023 – Feb 5, 2023 2 messages not in the archive MD RAID

lore
Share & tools
lore

David T-G

author
#0 lore raw

Hi, all --

I have

diskfarm:~ # mdadm -D /dev/md51 | egrep /dev/
/dev/md51:

	 0     259        9        0      active sync   /dev/sdb51
	 1     259        2        1      active sync   /dev/sdc51
	 3     259       16        2      active sync   /dev/sdd51
	 4     259       23        3      active sync   /dev/sdj51

Toshiba X300 10T

diskfarm:~ # smartctl -i /dev/sdb | egrep '(Model|Number|Version):'
Device Model: TOSHIBA HDWR11A
Serial Number: 61U0A0HQFBKG
Firmware Version: 0603

drives in my disk farm, and it's about time to grow again. As I shopped around, I stumbled over a WD Red Plus 12T WD120EFBX drive at just $10 more, and who wouldn't want an extra 2T for ten bucks? So I'm contemplating rolling in a different model. But how do I know that it will fit well into the mix?

The X300 is a 7200rpm 256Mcache 6G/sec CMR drive. The Red Plus is also listed as a 7200rpm* 256Mcache 6G/sec CMR drive. They certainly sound equivalent. What else do I need to consider, and where else do I need to look to learn?

* The spec actually says "7200 RPM Class". Does that mean not really 7200rpm? That wouldn't surprise me in this modern day and age, and if the X300 also isn't really then that also wouldn't.

TIA & HAND

:-D

Signature · 3 lines
David T-G
See http://justpickone.org/davidtg/email/
See http://justpickone.org/davidtg/tofu.txt
#1 lore raw
Quoted 24 lines · David T-G

Hi, all --

I have

diskfarm:~ # mdadm -D /dev/md51 | egrep /dev/
/dev/md51:

	 0     259        9        0      active sync   /dev/sdb51
	 1     259        2        1      active sync   /dev/sdc51
	 3     259       16        2      active sync   /dev/sdd51
	 4     259       23        3      active sync   /dev/sdj51

Toshiba X300 10T

diskfarm:~ # smartctl -i /dev/sdb | egrep '(Model|Number|Version):'
Device Model: TOSHIBA HDWR11A
Serial Number: 61U0A0HQFBKG
Firmware Version: 0603

drives in my disk farm, and it's about time to grow again. As I shopped around, I stumbled over a WD Red Plus 12T WD120EFBX drive at just $10 more, and who wouldn't want an extra 2T for ten bucks? So I'm contemplating rolling in a different model. But how do I know that it will fit well into the mix?

Quoted 4 lines

The X300 is a 7200rpm 256Mcache 6G/sec CMR drive. The Red Plus is also listed as a 7200rpm* 256Mcache 6G/sec CMR drive. They certainly sound equivalent. What else do I need to consider, and where else do I need to look to learn?

I don't trust WD. That said, a lot of people do. I've got two 4TB Ironwolves, one 3TB Barracuda (slap wrist!), and one 8TB X300.

So mixing drives isn't a problem - just take a look at the Ironwolf - that might give you extra capacity too.

Quoted 6 lines

* The spec actually says "7200 RPM Class". Does that mean not really 7200rpm? That wouldn't surprise me in this modern day and age, and if the X300 also isn't really then that also wouldn't.

Drives now are "Constant Head Speed" not constant rpm. I'm guessing, that what it means is that for the inner tracks it spins at 7200, and as the heads move out, the rpms slow down to keep the speed the head is going over the platter constant.

Cheers,
Wol

#2 lore raw
Quoted 2 lines · Wols Lists

Drives now are "Constant Head Speed" not constant rpm. I'm guessing,

Source ?

"Constant linear velocity" (CLV, as opposed to "constant angular velocity" - CAV) is adapted for use requiring a constant transfer rate such as media recording or playback, not random access, and is mostly found in optical disc drives.

Quoted 1 line

that what it means is that for the inner tracks it spins at 7200, and as the heads move out, the rpms slow down to keep the speed the head is going over the platter constant.

It also implies that the spindle is able to accelerate from the lower speed (around 3600 RPM) to 7200 RPM or decelerate from 7200 to 3600 RPM in less than the full stroke time, which is around 20 ms in order to not degrade the access time. It sounds highly unlikely to me.

#4 lore raw
In reply to Wol

Replying to myself,

https://www.amazon.co.uk/Seagate-ST12000VN0008-4TB-ST4000VM000/dp/B07J351T2V/ref=sr_1_5?keywords=12tb+hard+drive&qid=1675380717&sprefix=12TB+has%2Caps%2C77&sr=8-5

https://www.amazon.co.uk/Plus-12TB-Internal-Hard-Drive/dp/B0BNJFHGHR/ref=sr_1_2?crid=MDH53LQ81TE3&keywords=wd+12TB+red+plus&qid=1675380788&sprefix=wd+12tb+red+plus%2Caps%2C64&sr=8-2

The Ironwolf is £50 - 20% - cheaper than the WD. Ditch the WD ...

Cheers,
Wol

Quoted 25 lines · Wol
Quoted 11 lines · Pascal Hambourg
Quoted 2 lines · Wols Lists

Drives now are "Constant Head Speed" not constant rpm. I'm guessing,

Source ?

"Constant linear velocity" (CLV, as opposed to "constant angular velocity" - CAV) is adapted for use requiring a constant transfer rate such as media recording or playback, not random access, and is mostly found in optical disc drives.

Quoted 1 line

that what it means is that for the inner tracks it spins at 7200, and as the heads move out, the rpms slow down to keep the speed the head is going over the platter constant.

It also implies that the spindle is able to accelerate from the lower speed (around 3600 RPM) to 7200 RPM or decelerate from 7200 to 3600 RPM in less than the full stroke time, which is around 20 ms in order to not degrade the access time. It sounds highly unlikely to me.

Just tried to Google it. Did I say I didn't trust WD?

It sounds like it's marketing speak designed to re-define the meaning of Revolutions Per Minute.

Apparently 7200rpm drives are being sold as "5400 class". Misleading people who are prepared to take the speed hit, into buying a drive that is power-hungry and noisy.

As the google page I saw said - "Why describe it as "5400-class" in a spec sheet - the people who don't know what it means won't be reading spec sheets, and the people who do read spec sheets won't know what the hell it means and it is deceptive".

I'd go and look for another X300, or an Ironwolf. At least you'll know what you're getting ...

Cheers,
Wol

#3 lore raw
In reply to Pascal Hambourg
Quoted 11 lines · Pascal Hambourg
Quoted 2 lines · Wols Lists

Drives now are "Constant Head Speed" not constant rpm. I'm guessing,

Source ?

"Constant linear velocity" (CLV, as opposed to "constant angular velocity" - CAV) is adapted for use requiring a constant transfer rate such as media recording or playback, not random access, and is mostly found in optical disc drives.

Quoted 1 line

that what it means is that for the inner tracks it spins at 7200, and as the heads move out, the rpms slow down to keep the speed the head is going over the platter constant.

It also implies that the spindle is able to accelerate from the lower speed (around 3600 RPM) to 7200 RPM or decelerate from 7200 to 3600 RPM in less than the full stroke time, which is around 20 ms in order to not degrade the access time. It sounds highly unlikely to me.

Just tried to Google it. Did I say I didn't trust WD?

It sounds like it's marketing speak designed to re-define the meaning of Revolutions Per Minute.

Apparently 7200rpm drives are being sold as "5400 class". Misleading people who are prepared to take the speed hit, into buying a drive that is power-hungry and noisy.

As the google page I saw said - "Why describe it as "5400-class" in a spec sheet - the people who don't know what it means won't be reading spec sheets, and the people who do read spec sheets won't know what the hell it means and it is deceptive".

I'd go and look for another X300, or an Ironwolf. At least you'll know what you're getting ...

Cheers,
Wol

#7 lore raw
In reply to a message not in the archive

Roger, et al --

...and then Roger Heflin said...
% I have mixed many drives, I have never really had a major slowness. At

Good to know.

% worst you will be limited by the drive with the slowest seeks/transfer % rate. So long as one disk's RPM is not significantly different you should

That's pretty much what I was wondering, but I imagine if it's the same RPM and the same cache and the same SATA rate it should be ... about the same.

% not notice it, unless you are running your array right at the limit.

Hmmph. I'm not entirely sure I'm not anyway, but it is just a little PC mobo running primary and daughtercard SATA ports. A Real Server (tm) is far, far beyond the current horizon :-)

%
% Technically you may want to also look at another parm that is the sustained % transfer rate range coming off the platter. This will be a range that is [snip]

Oh, thanks! Sounds good.

HAND

:-D

Signature · 3 lines
David T-G
See http://justpickone.org/davidtg/email/
See http://justpickone.org/davidtg/tofu.txt
#5 lore raw
In reply to Wol

Wol, et al --

...and then Wol said...
%
% Just tried to Google it. Did I say I didn't trust WD?
%
% It sounds like it's marketing speak designed to re-define the meaning of % Revolutions Per Minute.

Ew. Figured it was something like that ...

%
...
%
% I'd go and look for another X300, or an Ironwolf. At least you'll know what % you're getting ...

Thanks. I've spent quite a bit surfing for Ironwolf, [XN]300, Exos, and Red drives in various sizes. Pricing is ... interesting.

Along those lines, does anyone have ACTUAL experience with MaxDigitalData "white" drives? I've read that they're everything from OEM bulk unbranded major-brand-name drives to badly-refurbished used drives, so I don't need apocrypha, but I have to at least take a look since their prices are about half the going rate. I'd love to buy two for the price of one and expand from RAID5 to RAID6 ...

%
% Cheers,
% Wol

Thanks again

:-D

Signature · 3 lines
David T-G
See http://justpickone.org/davidtg/email/
See http://justpickone.org/davidtg/tofu.txt
#9 lore raw

throughput testing (was "Re: how to know a hard drive will mix well")

In reply to a message not in the archive

Roger, et al --

...and then Roger Heflin said...
% On Fri, Feb 3, 2023 at 8:22 PM David Thorburn-Gundlach <
% [email protected]> wrote:
% >
% > % not notice it, unless you are running your array right at the limit. % >
% > Hmmph. I'm not entirely sure I'm not anyway, but it is just a little PC % > mobo running primary and daughtercard SATA ports. A Real Server (tm) is % > far, far beyond the current horizon :-)
%
% It does not take much of a motherboard/cpu to service a bunch of spinning % disks.
%
...
% About the only major thing that makes any difference is making sure that % whatever card is running the sata ports does not have a bottleneck. [snip]

Thanks! It'll be a bit before I can play, but I'll do some reading and work some tests. Stay tuned :-)

HAND

:-D

Signature · 3 lines
David T-G
See http://justpickone.org/davidtg/email/
See http://justpickone.org/davidtg/tofu.txt