Skip to contentSkip to conversation

net/sched: cls_api: Support hardware miss to tc action

PATCH Superseded Paul Blakey 2 participants 9 messages Feb 13, 2023

Subsystems (6)

v10 of 13 Superseded Latest is v13 →

lore
Share & tools
lore
#0 lore raw

v10 cover net/sched: cls_api: Support hardware miss to tc action

Hi,

This series adds support for hardware miss to instruct tc to continue execution in a specific tc action instance on a filter's action list. The mlx5 driver patch (besides the refactors) shows its usage instead of using just chain restore.

Currently a filter's action list must be executed all together or not at all as driver are only able to tell tc to continue executing from a specific tc chain, and not a specific filter/action.

This is troublesome with regards to action CT, where new connections should be sent to software (via tc chain restore), and established connections can be handled in hardware.

Checking for new connections is done when executing the ct action in hardware (by checking the packet's tuple against known established tuples). But if there is a packet modification (pedit) action before action CT and the checked tuple is a new connection, hardware will need to revert the previous packet modifications before sending it back to software so it can re-match the same tc filter in software and re-execute its CT action.

The following is an example configuration of stateless nat on mlx5 driver that isn't supported before this patchet:

#Setup corrosponding mlx5 VFs in namespaces

 $ ip netns add ns0
 $ ip netns add ns1
 $ ip link set dev enp8s0f0v0 netns ns0
 $ ip netns exec ns0 ifconfig enp8s0f0v0 1.1.1.1/24 up
 $ ip link set dev enp8s0f0v1 netns ns1
 $ ip netns exec ns1 ifconfig enp8s0f0v1 1.1.1.2/24 up

#Setup tc arp and ct rules on mxl5 VF representors

 $ tc qdisc add dev enp8s0f0_0 ingress
 $ tc qdisc add dev enp8s0f0_1 ingress
 $ ifconfig enp8s0f0_0 up
 $ ifconfig enp8s0f0_1 up

#Original side

 $ tc filter add dev enp8s0f0_0 ingress chain 0 proto ip flower \
    ct_state -trk ip_proto tcp dst_port 8888 \
      action pedit ex munge tcp dport set 5001 pipe \
      action csum ip tcp pipe \
      action ct pipe \
      action goto chain 1
 $ tc filter add dev enp8s0f0_0 ingress chain 1 proto ip flower \
    ct_state +trk+est \
      action mirred egress redirect dev enp8s0f0_1
 $ tc filter add dev enp8s0f0_0 ingress chain 1 proto ip flower \
    ct_state +trk+new \
      action ct commit pipe \
      action mirred egress redirect dev enp8s0f0_1
 $ tc filter add dev enp8s0f0_0 ingress chain 0 proto arp flower \
      action mirred egress redirect dev enp8s0f0_1

#Reply side

 $ tc filter add dev enp8s0f0_1 ingress chain 0 proto arp flower \
      action mirred egress redirect dev enp8s0f0_0
 $ tc filter add dev enp8s0f0_1 ingress chain 0 proto ip flower \
    ct_state -trk ip_proto tcp \ 
      action ct pipe \
      action pedit ex munge tcp sport set 8888 pipe \
      action csum ip tcp pipe \
      action mirred egress redirect dev enp8s0f0_0

#Run traffic

 $ ip netns exec ns1 iperf -s -p 5001&
 $ sleep 2 #wait for iperf to fully open
 $ ip netns exec ns0 iperf -c 1.1.1.2 -p 8888

#dump tc filter stats on enp8s0f0_0 chain 0 rule and see hardware packets:

 $ tc -s filter show dev enp8s0f0_0 ingress chain 0 proto ip | grep "hardware.*pkt"
        Sent hardware 9310116832 bytes 6149672 pkt
        Sent hardware 9310116832 bytes 6149672 pkt
        Sent hardware 9310116832 bytes 6149672 pkt

A new connection executing the first filter in hardware will first rewrite the dst port to the new port, and then the ct action is executed, because this is a new connection, hardware will need to be send this back to software, on chain 0, to execute the first filter again in software. The dst port needs to be reverted otherwise it won't re-match the old dst port in the first filter. Because of that, currently mlx5 driver will reject offloading the above action ct rule.

This series adds supports partial offload of a filter's action list, and letting tc software continue processing in the specific action instance where hardware left off (in the above case after the "action pedit ex munge tcp dport... of the first rule") allowing support for scenarios such as the above.

Changelog:
v1->v2:
Fixed compilation without CONFIG_NET_CLS
Cover letter re-write

v2->v3:
Unlock spin_lock on error in cls flower filter handle refactor Cover letter

v3->v4:
Silence warning by clang

v4->v5:
Cover letter example
Removed ifdef as much as possible by using inline stubs

v5->v6:
Removed new inlines in cls_api.c (bot complained in patchwork) Added reviewed-by/ack - Thanks!

v6->v7:
Removed WARN_ON from pkt path (leon)
Removed unnecessary return in void func

v7->v8:
Removed #if IS_ENABLED on skb ext adding Kconfig changes Complex variable init in seperate lines if,else if, else if ---> switch case

v8->v9:
Removed even more IS_ENABLED because of Kconfig

v9->v10:
cls_api: reading ext->chain moved to else instead (marcelo)

Paul Blakey (7):
net/sched: cls_api: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: flower: Support hardware miss to tc action net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/mlx5: Refactor tc miss handling to a single function net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5e: TC, Set CT miss to the specific ct action instance

 .../net/ethernet/mellanox/mlx5/core/Kconfig   |   4 +-
 .../ethernet/mellanox/mlx5/core/en/rep/tc.c   | 225 ++------------
 .../mellanox/mlx5/core/en/tc/sample.c         |   2 +-
 .../ethernet/mellanox/mlx5/core/en/tc_ct.c    |  39 +--
 .../ethernet/mellanox/mlx5/core/en/tc_ct.h    |   2 +
 .../net/ethernet/mellanox/mlx5/core/en_rx.c   |   4 +-
 .../net/ethernet/mellanox/mlx5/core/en_tc.c   | 280 ++++++++++++++++--
 .../net/ethernet/mellanox/mlx5/core/en_tc.h   |  23 +-
 .../net/ethernet/mellanox/mlx5/core/eswitch.h |   2 +
 .../mellanox/mlx5/core/lib/fs_chains.c        |  14 +-
 include/linux/skbuff.h                        |   6 +-
 include/net/flow_offload.h                    |   1 +
 include/net/pkt_cls.h                         |  34 ++-
 include/net/sch_generic.h                     |   2 +
 net/openvswitch/flow.c                        |   3 +-
 net/sched/act_api.c                           |   2 +-
 net/sched/cls_api.c                           | 215 +++++++++++++-
 net/sched/cls_flower.c                        |  73 +++--
 18 files changed, 604 insertions(+), 327 deletions(-)
Signature · 1 line
2.30.1
#3 lore raw

PATCH v10 3/7 net/sched: flower: Support hardware miss to tc action

To support hardware miss to tc action in actions on the flower classifier, implement the required getting of filter actions, and setup filter exts (actions) miss by giving it the filter's handle and actions.

---
 net/sched/cls_flower.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
net/sched/cls_flower.c +12 -1
index 564b862870c7..5da7f6d02e5d 100644
@@ -534,6 +534,15 @@ static struct cls_fl_filter *__fl_get(struct cls_fl_head *head, u32 handle)
 	return f;
 }
 
+static struct tcf_exts *fl_get_exts(const struct tcf_proto *tp, u32 handle)
+{
+	struct cls_fl_head *head = rcu_dereference_bh(tp->root);
+	struct cls_fl_filter *f;
+
+	f = idr_find(&head->handle_idr, handle);
+	return f ? &f->exts : NULL;
+}
+
 static int __fl_delete(struct tcf_proto *tp, struct cls_fl_filter *f,
 		       bool *last, bool rtnl_held,
 		       struct netlink_ext_ack *extack)
@@ -2227,7 +2236,8 @@ static int fl_change(struct net *net, struct sk_buff *in_skb,
 	}
 	fnew->handle = handle;
 
-	err = tcf_exts_init(&fnew->exts, net, TCA_FLOWER_ACT, 0);
+	err = tcf_exts_init_ex(&fnew->exts, net, TCA_FLOWER_ACT, 0, tp, handle,
+			       !tc_skip_hw(fnew->flags));
 	if (err < 0)
 		goto errout_idr;
 
@@ -3449,6 +3459,7 @@ static struct tcf_proto_ops cls_fl_ops __read_mostly = {
 	.tmplt_create	= fl_tmplt_create,
 	.tmplt_destroy	= fl_tmplt_destroy,
 	.tmplt_dump	= fl_tmplt_dump,
+	.get_exts	= fl_get_exts,
 	.owner		= THIS_MODULE,
 	.flags		= TCF_PROTO_OPS_DOIT_UNLOCKED,
 };
Signature · 1 line
2.30.1
#1 lore raw

PATCH v10 1/7 net/sched: cls_api: Support hardware miss to tc action

In reply to Paul Blakey

For drivers to support partial offload of a filter's action list, add support for action miss to specify an action instance to continue from in sw.

CT action in particular can't be fully offloaded, as new connections need to be handled in software. This imposes other limitations on the actions that can be offloaded together with the CT action, such as packet modifications.

Assign each action on a filter's action list a unique miss_cookie which drivers can then use to fill action_miss part of the tc skb extension. On getting back this miss_cookie, find the action instance with relevant cookie and continue classifying from there.

---
 include/linux/skbuff.h     |   6 +-
 include/net/flow_offload.h |   1 +
 include/net/pkt_cls.h      |  34 +++---
 include/net/sch_generic.h  |   2 +
 net/openvswitch/flow.c     |   3 +-
 net/sched/act_api.c        |   2 +-
 net/sched/cls_api.c        | 215 +++++++++++++++++++++++++++++++++++--
 7 files changed, 236 insertions(+), 27 deletions(-)
include/linux/skbuff.h +5 -1
index 47ab28a37f2f..4b2ee5e28eec 100644
@@ -319,12 +319,16 @@ struct nf_bridge_info {
  * and read by ovs to recirc_id.
  */
 struct tc_skb_ext {
-	__u32 chain;
+	union {
+		u64 act_miss_cookie;
+		__u32 chain;
+	};
 	__u16 mru;
 	__u16 zone;
 	u8 post_ct:1;
 	u8 post_ct_snat:1;
 	u8 post_ct_dnat:1;
+	u8 act_miss:1; /* Set if act_miss_cookie is used */
 };
 #endif
 
include/net/flow_offload.h +1 -0
index 0400a0ac8a29..88db7346eb7a 100644
@@ -228,6 +228,7 @@ void flow_action_cookie_destroy(struct flow_action_cookie *cookie);
 struct flow_action_entry {
 	enum flow_action_id		id;
 	u32				hw_index;
+	u64				miss_cookie;
 	enum flow_action_hw_stats	hw_stats;
 	action_destr			destructor;
 	void				*destructor_priv;
include/net/pkt_cls.h +20 -14
index cd410a87517b..e395f2a84ed2 100644
@@ -59,6 +59,8 @@ int tcf_block_get_ext(struct tcf_block **p_block, struct Qdisc *q,
 void tcf_block_put(struct tcf_block *block);
 void tcf_block_put_ext(struct tcf_block *block, struct Qdisc *q,
 		       struct tcf_block_ext_info *ei);
+int tcf_exts_init_ex(struct tcf_exts *exts, struct net *net, int action,
+		     int police, struct tcf_proto *tp, u32 handle, bool used_action_miss);
 
 static inline bool tcf_block_shared(struct tcf_block *block)
 {
@@ -229,6 +231,7 @@ struct tcf_exts {
 	struct tc_action **actions;
 	struct net	*net;
 	netns_tracker	ns_tracker;
+	struct tcf_exts_miss_cookie_node *miss_cookie_node;
 #endif
 	/* Map to export classifier specific extension TLV types to the
 	 * generic extensions API. Unsupported extensions must be set to 0.
@@ -240,21 +243,11 @@ struct tcf_exts {
 static inline int tcf_exts_init(struct tcf_exts *exts, struct net *net,
 				int action, int police)
 {
-#ifdef CONFIG_NET_CLS_ACT
-	exts->type = 0;
-	exts->nr_actions = 0;
-	/* Note: we do not own yet a reference on net.
-	 * This reference might be taken later from tcf_exts_get_net().
-	 */
-	exts->net = net;
-	exts->actions = kcalloc(TCA_ACT_MAX_PRIO, sizeof(struct tc_action *),
-				GFP_KERNEL);
-	if (!exts->actions)
-		return -ENOMEM;
+#ifdef CONFIG_NET_CLS
+	return tcf_exts_init_ex(exts, net, action, police, NULL, 0, false);
+#else
+	return -EOPNOTSUPP;
 #endif
-	exts->action = action;
-	exts->police = police;
-	return 0;
 }
 
 /* Return false if the netns is being destroyed in cleanup_net(). Callers
@@ -353,6 +346,18 @@ tcf_exts_exec(struct sk_buff *skb, struct tcf_exts *exts,
 	return TC_ACT_OK;
 }
 
+static inline int
+tcf_exts_exec_ex(struct sk_buff *skb, struct tcf_exts *exts, int act_index,
+		 struct tcf_result *res)
+{
+#ifdef CONFIG_NET_CLS_ACT
+	return tcf_action_exec(skb, exts->actions + act_index,
+			       exts->nr_actions - act_index, res);
+#else
+	return TC_ACT_OK;
+#endif
+}
+
 int tcf_exts_validate(struct net *net, struct tcf_proto *tp,
 		      struct nlattr **tb, struct nlattr *rate_tlv,
 		      struct tcf_exts *exts, u32 flags,
@@ -577,6 +582,7 @@ int tc_setup_offload_action(struct flow_action *flow_action,
 void tc_cleanup_offload_action(struct flow_action *flow_action);
 int tc_setup_action(struct flow_action *flow_action,
 		    struct tc_action *actions[],
+		    u32 miss_cookie_base,
 		    struct netlink_ext_ack *extack);
 
 int tc_setup_cb_call(struct tcf_block *block, enum tc_setup_type type,
include/net/sch_generic.h +2 -0
index af4aa66aaa4e..fab5ba3e61b7 100644
@@ -369,6 +369,8 @@ struct tcf_proto_ops {
 						struct nlattr **tca,
 						struct netlink_ext_ack *extack);
 	void			(*tmplt_destroy)(void *tmplt_priv);
+	struct tcf_exts *	(*get_exts)(const struct tcf_proto *tp,
+					    u32 handle);
 
 	/* rtnetlink specific */
 	int			(*dump)(struct net*, struct tcf_proto*, void *,
net/openvswitch/flow.c +2 -1
index 416976f70322..33b21a0c0548 100644
@@ -1041,7 +1041,8 @@ int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
 #if IS_ENABLED(CONFIG_NET_TC_SKB_EXT)
 	if (tc_skb_ext_tc_enabled()) {
 		tc_ext = skb_ext_find(skb, TC_SKB_EXT);
-		key->recirc_id = tc_ext ? tc_ext->chain : 0;
+		key->recirc_id = tc_ext && !tc_ext->act_miss ?
+				 tc_ext->chain : 0;
 		OVS_CB(skb)->mru = tc_ext ? tc_ext->mru : 0;
 		post_ct = tc_ext ? tc_ext->post_ct : false;
 		post_ct_snat = post_ct ? tc_ext->post_ct_snat : false;
net/sched/act_api.c +1 -1
index cd09ef49df22..16fd3d30eb12 100644
@@ -272,7 +272,7 @@ static int tcf_action_offload_add_ex(struct tc_action *action,
 	if (err)
 		goto fl_err;
 
-	err = tc_setup_action(&fl_action->action, actions, extack);
+	err = tc_setup_action(&fl_action->action, actions, 0, extack);
 	if (err) {
 		NL_SET_ERR_MSG_MOD(extack,
 				   "Failed to setup tc actions for offload");
net/sched/cls_api.c +205 -10

307 lines not on this page · raw message

Signature · 1 line
2.30.1
#2 lore raw

PATCH v10 2/7 net/sched: flower: Move filter handle initialization earlier

In reply to Paul Blakey

To support miss to action during hardware offload the filter's handle is needed when setting up the actions (tcf_exts_init()), and before offloading.

Move filter handle initialization earlier.

---
 net/sched/cls_flower.c | 62 ++++++++++++++++++++++++------------------
 1 file changed, 35 insertions(+), 27 deletions(-)
net/sched/cls_flower.c +35 -27
index 0b15698b3531..564b862870c7 100644
@@ -2192,10 +2192,6 @@ static int fl_change(struct net *net, struct sk_buff *in_skb,
 	INIT_LIST_HEAD(&fnew->hw_list);
 	refcount_set(&fnew->refcnt, 1);
 
-	err = tcf_exts_init(&fnew->exts, net, TCA_FLOWER_ACT, 0);
-	if (err < 0)
-		goto errout;
-
 	if (tb[TCA_FLOWER_FLAGS]) {
 		fnew->flags = nla_get_u32(tb[TCA_FLOWER_FLAGS]);
 
@@ -2205,15 +2201,45 @@ static int fl_change(struct net *net, struct sk_buff *in_skb,
 		}
 	}
 
+	if (!fold) {
+		spin_lock(&tp->lock);
+		if (!handle) {
+			handle = 1;
+			err = idr_alloc_u32(&head->handle_idr, fnew, &handle,
+					    INT_MAX, GFP_ATOMIC);
+		} else {
+			err = idr_alloc_u32(&head->handle_idr, fnew, &handle,
+					    handle, GFP_ATOMIC);
+
+			/* Filter with specified handle was concurrently
+			 * inserted after initial check in cls_api. This is not
+			 * necessarily an error if NLM_F_EXCL is not set in
+			 * message flags. Returning EAGAIN will cause cls_api to
+			 * try to update concurrently inserted rule.
+			 */
+			if (err == -ENOSPC)
+				err = -EAGAIN;
+		}
+		spin_unlock(&tp->lock);
+
+		if (err)
+			goto errout;
+	}
+	fnew->handle = handle;
+
+	err = tcf_exts_init(&fnew->exts, net, TCA_FLOWER_ACT, 0);
+	if (err < 0)
+		goto errout_idr;
+
 	err = fl_set_parms(net, tp, fnew, mask, base, tb, tca[TCA_RATE],
 			   tp->chain->tmplt_priv, flags, fnew->flags,
 			   extack);
 	if (err)
-		goto errout;
+		goto errout_idr;
 
 	err = fl_check_assign_mask(head, fnew, fold, mask);
 	if (err)
-		goto errout;
+		goto errout_idr;
 
 	err = fl_ht_insert_unique(fnew, fold, &in_ht);
 	if (err)
@@ -2279,29 +2305,9 @@ static int fl_change(struct net *net, struct sk_buff *in_skb,
 		refcount_dec(&fold->refcnt);
 		__fl_put(fold);
 	} else {
-		if (handle) {
-			/* user specifies a handle and it doesn't exist */
-			err = idr_alloc_u32(&head->handle_idr, fnew, &handle,
-					    handle, GFP_ATOMIC);
-
-			/* Filter with specified handle was concurrently
-			 * inserted after initial check in cls_api. This is not
-			 * necessarily an error if NLM_F_EXCL is not set in
-			 * message flags. Returning EAGAIN will cause cls_api to
-			 * try to update concurrently inserted rule.
-			 */
-			if (err == -ENOSPC)
-				err = -EAGAIN;
-		} else {
-			handle = 1;
-			err = idr_alloc_u32(&head->handle_idr, fnew, &handle,
-					    INT_MAX, GFP_ATOMIC);
-		}
-		if (err)
-			goto errout_hw;
+		idr_replace(&head->handle_idr, fnew, fnew->handle);
 
 		refcount_inc(&fnew->refcnt);
-		fnew->handle = handle;
 		list_add_tail_rcu(&fnew->list, &fnew->mask->filters);
 		spin_unlock(&tp->lock);
 	}
@@ -2324,6 +2330,8 @@ static int fl_change(struct net *net, struct sk_buff *in_skb,
 				       fnew->mask->filter_ht_params);
 errout_mask:
 	fl_mask_put(head, fnew->mask);
+errout_idr:
+	idr_remove(&head->handle_idr, fnew->handle);
 errout:
 	__fl_put(fnew);
 errout_tb:
Signature · 1 line
2.30.1
#4 lore raw

PATCH v10 4/7 net/mlx5: Kconfig: Make tc offload depend on tc skb extension

In reply to Paul Blakey

Tc skb extension is a basic requirement for using tc offload to support correct restoration on action miss.

Depend on it.

---
 drivers/net/ethernet/mellanox/mlx5/core/Kconfig     | 4 ++--
 drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c | 2 --
 drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c  | 7 -------
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c     | 2 --
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.h     | 2 --
 5 files changed, 2 insertions(+), 15 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/Kconfig +2 -2
index 26685fd0fdaa..bb1d7b039a7e 100644
@@ -85,7 +85,7 @@ config MLX5_BRIDGE
 
 config MLX5_CLS_ACT
 	bool "MLX5 TC classifier action support"
-	depends on MLX5_ESWITCH && NET_CLS_ACT
+	depends on MLX5_ESWITCH && NET_CLS_ACT && NET_TC_SKB_EXT
 	default y
 	help
 	  mlx5 ConnectX offloads support for TC classifier action (NET_CLS_ACT),
@@ -100,7 +100,7 @@ config MLX5_CLS_ACT
 
 config MLX5_TC_CT
 	bool "MLX5 TC connection tracking offload support"
-	depends on MLX5_CLS_ACT && NF_FLOW_TABLE && NET_ACT_CT && NET_TC_SKB_EXT
+	depends on MLX5_CLS_ACT && NF_FLOW_TABLE && NET_ACT_CT
 	default y
 	help
 	  Say Y here if you want to support offloading connection tracking rules
drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c +0 -2
index b08339d986d5..fcb4cf526727 100644
@@ -762,7 +762,6 @@ static bool mlx5e_restore_skb_chain(struct sk_buff *skb, u32 chain, u32 reg_c1,
 	struct mlx5e_priv *priv = netdev_priv(skb->dev);
 	u32 tunnel_id = (reg_c1 >> ESW_TUN_OFFSET) & TUNNEL_ID_MASK;
 
-#if IS_ENABLED(CONFIG_NET_TC_SKB_EXT)
 	if (chain) {
 		struct mlx5_rep_uplink_priv *uplink_priv;
 		struct mlx5e_rep_priv *uplink_rpriv;
@@ -784,7 +783,6 @@ static bool mlx5e_restore_skb_chain(struct sk_buff *skb, u32 chain, u32 reg_c1,
 					      zone_restore_id))
 			return false;
 	}
-#endif /* CONFIG_NET_TC_SKB_EXT */
 
 	return mlx5e_restore_tunnel(priv, skb, tc_priv, tunnel_id);
 }
drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c +0 -7
index 193562c14c44..2251f33c3865 100644
@@ -2078,13 +2078,6 @@ mlx5_tc_ct_init_check_support(struct mlx5e_priv *priv,
 	const char *err_msg = NULL;
 	int err = 0;
 
-#if !IS_ENABLED(CONFIG_NET_TC_SKB_EXT)
-	/* cannot restore chain ID on HW miss */
-
-	err_msg = "tc skb extension missing";
-	err = -EOPNOTSUPP;
-	goto out_err;
-#endif
 	if (IS_ERR_OR_NULL(post_act)) {
 		/* Ignore_flow_level support isn't supported by default for VFs and so post_act
 		 * won't be supported. Skip showing error msg.
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +0 -2
index e2ec80ebde58..f4897929f362 100644
@@ -5554,7 +5554,6 @@ int mlx5e_setup_tc_block_cb(enum tc_setup_type type, void *type_data,
 bool mlx5e_tc_update_skb(struct mlx5_cqe64 *cqe,
 			 struct sk_buff *skb)
 {
-#if IS_ENABLED(CONFIG_NET_TC_SKB_EXT)
 	u32 chain = 0, chain_tag, reg_b, zone_restore_id;
 	struct mlx5e_priv *priv = netdev_priv(skb->dev);
 	struct mlx5_mapped_obj mapped_obj;
@@ -5592,7 +5591,6 @@ bool mlx5e_tc_update_skb(struct mlx5_cqe64 *cqe,
 		netdev_dbg(priv->netdev, "Invalid mapped object type: %d\n", mapped_obj.type);
 		return false;
 	}
-#endif /* CONFIG_NET_TC_SKB_EXT */
 
 	return true;
 }
drivers/net/ethernet/mellanox/mlx5/core/en_tc.h +0 -2
index ce516dc7f3fd..ee9c8f31491e 100644
@@ -370,7 +370,6 @@ struct mlx5e_tc_table *mlx5e_tc_table_alloc(void);
 void mlx5e_tc_table_free(struct mlx5e_tc_table *tc);
 static inline bool mlx5e_cqe_regb_chain(struct mlx5_cqe64 *cqe)
 {
-#if IS_ENABLED(CONFIG_NET_TC_SKB_EXT)
 	u32 chain, reg_b;
 
 	reg_b = be32_to_cpu(cqe->ft_metadata);
@@ -381,7 +380,6 @@ static inline bool mlx5e_cqe_regb_chain(struct mlx5_cqe64 *cqe)
 	chain = reg_b & MLX5E_TC_TABLE_CHAIN_TAG_MASK;
 	if (chain)
 		return true;
-#endif
 
 	return false;
 }
Signature · 1 line
2.30.1
#5 lore raw

PATCH v10 5/7 net/mlx5: Refactor tc miss handling to a single function

In reply to Paul Blakey

Move tc miss handling code to en_tc.c, and remove
duplicate code.

---
 .../ethernet/mellanox/mlx5/core/en/rep/tc.c   | 223 ++----------------
 .../net/ethernet/mellanox/mlx5/core/en_rx.c   |   4 +-
 .../net/ethernet/mellanox/mlx5/core/en_tc.c   | 220 +++++++++++++++--
 .../net/ethernet/mellanox/mlx5/core/en_tc.h   |  11 +-
 4 files changed, 231 insertions(+), 227 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c +23 -200
index fcb4cf526727..0b84665989fb 100644
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
 /* Copyright (c) 2020 Mellanox Technologies. */
 
-#include <net/dst_metadata.h>
 #include <linux/netdevice.h>
 #include <linux/if_macvlan.h>
 #include <linux/list.h>
@@ -665,230 +664,54 @@ void mlx5e_rep_tc_netdevice_event_unregister(struct mlx5e_rep_priv *rpriv)
 				 mlx5e_rep_indr_block_unbind);
 }
 
-static bool mlx5e_restore_tunnel(struct mlx5e_priv *priv, struct sk_buff *skb,
-				 struct mlx5e_tc_update_priv *tc_priv,
-				 u32 tunnel_id)
-{
-	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
-	struct tunnel_match_enc_opts enc_opts = {};
-	struct mlx5_rep_uplink_priv *uplink_priv;
-	struct mlx5e_rep_priv *uplink_rpriv;
-	struct metadata_dst *tun_dst;
-	struct tunnel_match_key key;
-	u32 tun_id, enc_opts_id;
-	struct net_device *dev;
-	int err;
-
-	enc_opts_id = tunnel_id & ENC_OPTS_BITS_MASK;
-	tun_id = tunnel_id >> ENC_OPTS_BITS;
-
-	if (!tun_id)
-		return true;
-
-	uplink_rpriv = mlx5_eswitch_get_uplink_priv(esw, REP_ETH);
-	uplink_priv = &uplink_rpriv->uplink_priv;
-
-	err = mapping_find(uplink_priv->tunnel_mapping, tun_id, &key);
-	if (err) {
-		netdev_dbg(priv->netdev,
-			   "Couldn't find tunnel for tun_id: %d, err: %d\n",
-			   tun_id, err);
-		return false;
-	}
-
-	if (enc_opts_id) {
-		err = mapping_find(uplink_priv->tunnel_enc_opts_mapping,
-				   enc_opts_id, &enc_opts);
-		if (err) {
-			netdev_dbg(priv->netdev,
-				   "Couldn't find tunnel (opts) for tun_id: %d, err: %d\n",
-				   enc_opts_id, err);
-			return false;
-		}
-	}
-
-	if (key.enc_control.addr_type == FLOW_DISSECTOR_KEY_IPV4_ADDRS) {
-		tun_dst = __ip_tun_set_dst(key.enc_ipv4.src, key.enc_ipv4.dst,
-					   key.enc_ip.tos, key.enc_ip.ttl,
-					   key.enc_tp.dst, TUNNEL_KEY,
-					   key32_to_tunnel_id(key.enc_key_id.keyid),
-					   enc_opts.key.len);
-	} else if (key.enc_control.addr_type == FLOW_DISSECTOR_KEY_IPV6_ADDRS) {
-		tun_dst = __ipv6_tun_set_dst(&key.enc_ipv6.src, &key.enc_ipv6.dst,
-					     key.enc_ip.tos, key.enc_ip.ttl,
-					     key.enc_tp.dst, 0, TUNNEL_KEY,
-					     key32_to_tunnel_id(key.enc_key_id.keyid),
-					     enc_opts.key.len);
-	} else {
-		netdev_dbg(priv->netdev,
-			   "Couldn't restore tunnel, unsupported addr_type: %d\n",
-			   key.enc_control.addr_type);
-		return false;
-	}
-
-	if (!tun_dst) {
-		netdev_dbg(priv->netdev, "Couldn't restore tunnel, no tun_dst\n");
-		return false;
-	}
-
-	tun_dst->u.tun_info.key.tp_src = key.enc_tp.src;
-
-	if (enc_opts.key.len)
-		ip_tunnel_info_opts_set(&tun_dst->u.tun_info,
-					enc_opts.key.data,
-					enc_opts.key.len,
-					enc_opts.key.dst_opt_type);
-
-	skb_dst_set(skb, (struct dst_entry *)tun_dst);
-	dev = dev_get_by_index(&init_net, key.filter_ifindex);
-	if (!dev) {
-		netdev_dbg(priv->netdev,
-			   "Couldn't find tunnel device with ifindex: %d\n",
-			   key.filter_ifindex);
-		return false;
-	}
-
-	/* Set fwd_dev so we do dev_put() after datapath */
-	tc_priv->fwd_dev = dev;
-
-	skb->dev = dev;
-
-	return true;
-}
-
-static bool mlx5e_restore_skb_chain(struct sk_buff *skb, u32 chain, u32 reg_c1,
-				    struct mlx5e_tc_update_priv *tc_priv)
-{
-	struct mlx5e_priv *priv = netdev_priv(skb->dev);
-	u32 tunnel_id = (reg_c1 >> ESW_TUN_OFFSET) & TUNNEL_ID_MASK;
-
-	if (chain) {
-		struct mlx5_rep_uplink_priv *uplink_priv;
-		struct mlx5e_rep_priv *uplink_rpriv;
-		struct tc_skb_ext *tc_skb_ext;
-		struct mlx5_eswitch *esw;
-		u32 zone_restore_id;
-
-		tc_skb_ext = tc_skb_ext_alloc(skb);
-		if (!tc_skb_ext) {
-			WARN_ON(1);
-			return false;
-		}
-		tc_skb_ext->chain = chain;
-		zone_restore_id = reg_c1 & ESW_ZONE_ID_MASK;
-		esw = priv->mdev->priv.eswitch;
-		uplink_rpriv = mlx5_eswitch_get_uplink_priv(esw, REP_ETH);
-		uplink_priv = &uplink_rpriv->uplink_priv;
-		if (!mlx5e_tc_ct_restore_flow(uplink_priv->ct_priv, skb,
-					      zone_restore_id))
-			return false;
-	}
-
-	return mlx5e_restore_tunnel(priv, skb, tc_priv, tunnel_id);
-}
-
-static void mlx5_rep_tc_post_napi_receive(struct mlx5e_tc_update_priv *tc_priv)
-{
-	if (tc_priv->fwd_dev)
-		dev_put(tc_priv->fwd_dev);
-}
-
-static void mlx5e_restore_skb_sample(struct mlx5e_priv *priv, struct sk_buff *skb,
-				     struct mlx5_mapped_obj *mapped_obj,
-				     struct mlx5e_tc_update_priv *tc_priv)
-{
-	if (!mlx5e_restore_tunnel(priv, skb, tc_priv, mapped_obj->sample.tunnel_id)) {
-		netdev_dbg(priv->netdev,
-			   "Failed to restore tunnel info for sampled packet\n");
-		return;
-	}
-	mlx5e_tc_sample_skb(skb, mapped_obj);
-	mlx5_rep_tc_post_napi_receive(tc_priv);
-}
-
-static bool mlx5e_restore_skb_int_port(struct mlx5e_priv *priv, struct sk_buff *skb,
-				       struct mlx5_mapped_obj *mapped_obj,
-				       struct mlx5e_tc_update_priv *tc_priv,
-				       bool *forward_tx,
-				       u32 reg_c1)
-{
-	u32 tunnel_id = (reg_c1 >> ESW_TUN_OFFSET) & TUNNEL_ID_MASK;
-	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
-	struct mlx5_rep_uplink_priv *uplink_priv;
-	struct mlx5e_rep_priv *uplink_rpriv;
-
-	/* Tunnel restore takes precedence over int port restore */
-	if (tunnel_id)
-		return mlx5e_restore_tunnel(priv, skb, tc_priv, tunnel_id);
-
-	uplink_rpriv = mlx5_eswitch_get_uplink_priv(esw, REP_ETH);
-	uplink_priv = &uplink_rpriv->uplink_priv;
-
-	if (mlx5e_tc_int_port_dev_fwd(uplink_priv->int_port_priv, skb,
-				      mapped_obj->int_port_metadata, forward_tx)) {
-		/* Set fwd_dev for future dev_put */
-		tc_priv->fwd_dev = skb->dev;
-
-		return true;
-	}
-
-	return false;
-}
-
 void mlx5e_rep_tc_receive(struct mlx5_cqe64 *cqe, struct mlx5e_rq *rq,
 			  struct sk_buff *skb)
 {
-	u32 reg_c1 = be32_to_cpu(cqe->ft_metadata);
+	u32 reg_c0, reg_c1, zone_restore_id, tunnel_id;
 	struct mlx5e_tc_update_priv tc_priv = {};
-	struct mlx5_mapped_obj mapped_obj;
+	struct mlx5_rep_uplink_priv *uplink_priv;
+	struct mlx5e_rep_priv *uplink_rpriv;
+	struct mlx5_tc_ct_priv *ct_priv;
+	struct mapping_ctx *mapping_ctx;
 	struct mlx5_eswitch *esw;
-	bool forward_tx = false;
 	struct mlx5e_priv *priv;
-	u32 reg_c0;
-	int err;
 
 	reg_c0 = (be32_to_cpu(cqe->sop_drop_qpn) & MLX5E_TC_FLOW_ID_MASK);
 	if (!reg_c0 || reg_c0 == MLX5_FS_DEFAULT_FLOW_TAG)
 		goto forward;
 
-	/* If reg_c0 is not equal to the default flow tag then skb->mark
+	/* If mapped_obj_id is not equal to the default flow tag then skb->mark
 	 * is not supported and must be reset back to 0.
 	 */
 	skb->mark = 0;
 
 	priv = netdev_priv(skb->dev);
 	esw = priv->mdev->priv.eswitch;
-	err = mapping_find(esw->offloads.reg_c0_obj_pool, reg_c0, &mapped_obj);
-	if (err) {
-		netdev_dbg(priv->netdev,
-			   "Couldn't find mapped object for reg_c0: %d, err: %d\n",
-			   reg_c0, err);
-		goto free_skb;
-	}
+	mapping_ctx = esw->offloads.reg_c0_obj_pool;
+	reg_c1 = be32_to_cpu(cqe->ft_metadata);
+	zone_restore_id = reg_c1 & ESW_ZONE_ID_MASK;
+	tunnel_id = (reg_c1 >> ESW_TUN_OFFSET) & TUNNEL_ID_MASK;
 
-	if (mapped_obj.type == MLX5_MAPPED_OBJ_CHAIN) {
-		if (!mlx5e_restore_skb_chain(skb, mapped_obj.chain, reg_c1, &tc_priv) &&
-		    !mlx5_ipsec_is_rx_flow(cqe))
-			goto free_skb;
-	} else if (mapped_obj.type == MLX5_MAPPED_OBJ_SAMPLE) {
-		mlx5e_restore_skb_sample(priv, skb, &mapped_obj, &tc_priv);
-		goto free_skb;
-	} else if (mapped_obj.type == MLX5_MAPPED_OBJ_INT_PORT_METADATA) {
-		if (!mlx5e_restore_skb_int_port(priv, skb, &mapped_obj, &tc_priv,
-						&forward_tx, reg_c1))
-			goto free_skb;
-	} else {
-		netdev_dbg(priv->netdev, "Invalid mapped object type: %d\n", mapped_obj.type);
+	uplink_rpriv = mlx5_eswitch_get_uplink_priv(esw, REP_ETH);
+	uplink_priv = &uplink_rpriv->uplink_priv;
+	ct_priv = uplink_priv->ct_priv;
+
+	if (!mlx5_ipsec_is_rx_flow(cqe) &&
+	    !mlx5e_tc_update_skb(cqe, skb, mapping_ctx, reg_c0, ct_priv, zone_restore_id, tunnel_id,
+				 &tc_priv))
 		goto free_skb;
-	}
 
 forward:
-	if (forward_tx)
+	if (tc_priv.skb_done)
+		goto free_skb;
+
+	if (tc_priv.forward_tx)
 		dev_queue_xmit(skb);
 	else
 		napi_gro_receive(rq->cq.napi, skb);
 
-	mlx5_rep_tc_post_napi_receive(&tc_priv);
+	if (tc_priv.fwd_dev)
+		dev_put(tc_priv.fwd_dev);
 
 	return;
 
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +2 -2
index a9473a51edc1..fea0c2aa95e2 100644
@@ -1792,7 +1792,7 @@ static void mlx5e_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe)
 	mlx5e_complete_rx_cqe(rq, cqe, cqe_bcnt, skb);
 
 	if (mlx5e_cqe_regb_chain(cqe))
-		if (!mlx5e_tc_update_skb(cqe, skb)) {
+		if (!mlx5e_tc_update_skb_nic(cqe, skb)) {
 			dev_kfree_skb_any(skb);
 			goto free_wqe;
 		}
@@ -2259,7 +2259,7 @@ static void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cq
 	mlx5e_complete_rx_cqe(rq, cqe, cqe_bcnt, skb);
 
 	if (mlx5e_cqe_regb_chain(cqe))
-		if (!mlx5e_tc_update_skb(cqe, skb)) {
+		if (!mlx5e_tc_update_skb_nic(cqe, skb)) {
 			dev_kfree_skb_any(skb);
 			goto mpwrq_cqe_out;
 		}
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +197 -23

249 lines not on this page · raw message

drivers/net/ethernet/mellanox/mlx5/core/en_tc.h +9 -2
index ee9c8f31491e..1c52c8915c3a 100644
@@ -59,6 +59,8 @@ int mlx5e_tc_num_filters(struct mlx5e_priv *priv, unsigned long flags);
 
 struct mlx5e_tc_update_priv {
 	struct net_device *fwd_dev;
+	bool skb_done;
+	bool forward_tx;
 };
 
 struct mlx5_nic_flow_attr {
@@ -384,14 +386,19 @@ static inline bool mlx5e_cqe_regb_chain(struct mlx5_cqe64 *cqe)
 	return false;
 }
 
-bool mlx5e_tc_update_skb(struct mlx5_cqe64 *cqe, struct sk_buff *skb);
+bool mlx5e_tc_update_skb_nic(struct mlx5_cqe64 *cqe, struct sk_buff *skb);
+bool mlx5e_tc_update_skb(struct mlx5_cqe64 *cqe, struct sk_buff *skb,
+			 struct mapping_ctx *mapping_ctx, u32 mapped_obj_id,
+			 struct mlx5_tc_ct_priv *ct_priv,
+			 u32 zone_restore_id, u32 tunnel_id,
+			 struct mlx5e_tc_update_priv *tc_priv);
 #else /* CONFIG_MLX5_CLS_ACT */
 static inline struct mlx5e_tc_table *mlx5e_tc_table_alloc(void) { return NULL; }
 static inline void mlx5e_tc_table_free(struct mlx5e_tc_table *tc) {}
 static inline bool mlx5e_cqe_regb_chain(struct mlx5_cqe64 *cqe)
 { return false; }
 static inline bool
-mlx5e_tc_update_skb(struct mlx5_cqe64 *cqe, struct sk_buff *skb)
+mlx5e_tc_update_skb_nic(struct mlx5_cqe64 *cqe, struct sk_buff *skb)
 { return true; }
 #endif
 
Signature · 1 line
2.30.1
#6 lore raw

PATCH v10 6/7 net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG

In reply to Paul Blakey

This reg usage is always a mapped object, not necessarily containing chain info.

Rename to properly convey what it stores. This patch doesn't change any functionality.

---
 .../net/ethernet/mellanox/mlx5/core/en/tc/sample.c |  2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c |  2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    |  6 +++---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.h    |  4 ++--
 .../ethernet/mellanox/mlx5/core/lib/fs_chains.c    | 14 +++++++-------
 5 files changed, 14 insertions(+), 14 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c +1 -1
index f2c2c752bd1c..558a776359af 100644
@@ -237,7 +237,7 @@ sample_modify_hdr_get(struct mlx5_core_dev *mdev, u32 obj_id,
 	int err;
 
 	err = mlx5e_tc_match_to_reg_set(mdev, mod_acts, MLX5_FLOW_NAMESPACE_FDB,
-					CHAIN_TO_REG, obj_id);
+					MAPPED_OBJ_TO_REG, obj_id);
 	if (err)
 		goto err_set_regc0;
 
drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c +1 -1
index 2251f33c3865..de751d084770 100644
@@ -1875,7 +1875,7 @@ __mlx5_tc_ct_flow_offload(struct mlx5_tc_ct_priv *ct_priv,
 	ct_flow->chain_mapping = chain_mapping;
 
 	err = mlx5e_tc_match_to_reg_set(priv->mdev, pre_mod_acts, ct_priv->ns_type,
-					CHAIN_TO_REG, chain_mapping);
+					MAPPED_OBJ_TO_REG, chain_mapping);
 	if (err) {
 		ct_dbg("Failed to set chain register mapping");
 		goto err_mapping;
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +3 -3
index 76cda5e9180e..ff0a0220cd46 100644
@@ -105,7 +105,7 @@ struct mlx5e_tc_table {
 };
 
 struct mlx5e_tc_attr_to_reg_mapping mlx5e_tc_attr_to_reg_mappings[] = {
-	[CHAIN_TO_REG] = {
+	[MAPPED_OBJ_TO_REG] = {
 		.mfield = MLX5_ACTION_IN_FIELD_METADATA_REG_C_0,
 		.moffset = 0,
 		.mlen = 16,
@@ -132,7 +132,7 @@ struct mlx5e_tc_attr_to_reg_mapping mlx5e_tc_attr_to_reg_mappings[] = {
 	 * into reg_b that is passed to SW since we don't
 	 * jump between steering domains.
 	 */
-	[NIC_CHAIN_TO_REG] = {
+	[NIC_MAPPED_OBJ_TO_REG] = {
 		.mfield = MLX5_ACTION_IN_FIELD_METADATA_REG_B,
 		.moffset = 0,
 		.mlen = 16,
@@ -1583,7 +1583,7 @@ mlx5e_tc_offload_to_slow_path(struct mlx5_eswitch *esw,
 		goto err_get_chain;
 
 	err = mlx5e_tc_match_to_reg_set(esw->dev, &mod_acts, MLX5_FLOW_NAMESPACE_FDB,
-					CHAIN_TO_REG, chain_mapping);
+					MAPPED_OBJ_TO_REG, chain_mapping);
 	if (err)
 		goto err_reg_set;
 
drivers/net/ethernet/mellanox/mlx5/core/en_tc.h +2 -2
index 1c52c8915c3a..680333ab63fc 100644
@@ -229,7 +229,7 @@ void mlx5e_tc_update_neigh_used_value(struct mlx5e_neigh_hash_entry *nhe);
 void mlx5e_tc_reoffload_flows_work(struct work_struct *work);
 
 enum mlx5e_tc_attr_to_reg {
-	CHAIN_TO_REG,
+	MAPPED_OBJ_TO_REG,
 	VPORT_TO_REG,
 	TUNNEL_TO_REG,
 	CTSTATE_TO_REG,
@@ -238,7 +238,7 @@ enum mlx5e_tc_attr_to_reg {
 	MARK_TO_REG,
 	LABELS_TO_REG,
 	FTEID_TO_REG,
-	NIC_CHAIN_TO_REG,
+	NIC_MAPPED_OBJ_TO_REG,
 	NIC_ZONE_RESTORE_TO_REG,
 	PACKET_COLOR_TO_REG,
 };
drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c +7 -7
index df58cba37930..81ed91fee59b 100644
@@ -214,7 +214,7 @@ create_chain_restore(struct fs_chain *chain)
 	struct mlx5_eswitch *esw = chain->chains->dev->priv.eswitch;
 	u8 modact[MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto)] = {};
 	struct mlx5_fs_chains *chains = chain->chains;
-	enum mlx5e_tc_attr_to_reg chain_to_reg;
+	enum mlx5e_tc_attr_to_reg mapped_obj_to_reg;
 	struct mlx5_modify_hdr *mod_hdr;
 	u32 index;
 	int err;
@@ -242,7 +242,7 @@ create_chain_restore(struct fs_chain *chain)
 	chain->id = index;
 
 	if (chains->ns == MLX5_FLOW_NAMESPACE_FDB) {
-		chain_to_reg = CHAIN_TO_REG;
+		mapped_obj_to_reg = MAPPED_OBJ_TO_REG;
 		chain->restore_rule = esw_add_restore_rule(esw, chain->id);
 		if (IS_ERR(chain->restore_rule)) {
 			err = PTR_ERR(chain->restore_rule);
@@ -253,7 +253,7 @@ create_chain_restore(struct fs_chain *chain)
 		 * since we write the metadata to reg_b
 		 * that is passed to SW directly.
 		 */
-		chain_to_reg = NIC_CHAIN_TO_REG;
+		mapped_obj_to_reg = NIC_MAPPED_OBJ_TO_REG;
 	} else {
 		err = -EINVAL;
 		goto err_rule;
@@ -261,12 +261,12 @@ create_chain_restore(struct fs_chain *chain)
 
 	MLX5_SET(set_action_in, modact, action_type, MLX5_ACTION_TYPE_SET);
 	MLX5_SET(set_action_in, modact, field,
-		 mlx5e_tc_attr_to_reg_mappings[chain_to_reg].mfield);
+		 mlx5e_tc_attr_to_reg_mappings[mapped_obj_to_reg].mfield);
 	MLX5_SET(set_action_in, modact, offset,
-		 mlx5e_tc_attr_to_reg_mappings[chain_to_reg].moffset);
+		 mlx5e_tc_attr_to_reg_mappings[mapped_obj_to_reg].moffset);
 	MLX5_SET(set_action_in, modact, length,
-		 mlx5e_tc_attr_to_reg_mappings[chain_to_reg].mlen == 32 ?
-		 0 : mlx5e_tc_attr_to_reg_mappings[chain_to_reg].mlen);
+		 mlx5e_tc_attr_to_reg_mappings[mapped_obj_to_reg].mlen == 32 ?
+		 0 : mlx5e_tc_attr_to_reg_mappings[mapped_obj_to_reg].mlen);
 	MLX5_SET(set_action_in, modact, data, chain->id);
 	mod_hdr = mlx5_modify_header_alloc(chains->dev, chains->ns,
 					   1, modact);
Signature · 1 line
2.30.1
#7 lore raw

PATCH v10 7/7 net/mlx5e: TC, Set CT miss to the specific ct action instance

In reply to Paul Blakey

Currently, CT misses restore the missed chain on the tc skb extension so tc will continue from the relevant chain. Instead, restore the CT action's miss cookie on the extension, which will instruct tc to continue from the this specific CT action instance on the relevant filter's action list.

Map the CT action's miss_cookie to a new miss object (ACT_MISS), and use this miss mapping instead of the current chain miss object (CHAIN_MISS) for CT action misses.

To restore this new miss mapping value, add a RX restore rule for each such mapping value.

---
 .../ethernet/mellanox/mlx5/core/en/tc_ct.c    | 32 +++++-----
 .../ethernet/mellanox/mlx5/core/en/tc_ct.h    |  2 +
 .../net/ethernet/mellanox/mlx5/core/en_tc.c   | 64 +++++++++++++++++--
 .../net/ethernet/mellanox/mlx5/core/en_tc.h   |  6 ++
 .../net/ethernet/mellanox/mlx5/core/eswitch.h |  2 +
 5 files changed, 82 insertions(+), 24 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c +15 -17
index de751d084770..5c58ec279b10 100644
@@ -59,6 +59,7 @@ struct mlx5_tc_ct_debugfs {
 
 struct mlx5_tc_ct_priv {
 	struct mlx5_core_dev *dev;
+	struct mlx5e_priv *priv;
 	const struct net_device *netdev;
 	struct mod_hdr_tbl *mod_hdr_tbl;
 	struct xarray tuple_ids;
@@ -85,7 +86,6 @@ struct mlx5_ct_flow {
 	struct mlx5_flow_attr *pre_ct_attr;
 	struct mlx5_flow_handle *pre_ct_rule;
 	struct mlx5_ct_ft *ft;
-	u32 chain_mapping;
 };
 
 struct mlx5_ct_zone_rule {
@@ -1445,6 +1445,7 @@ mlx5_tc_ct_parse_action(struct mlx5_tc_ct_priv *priv,
 	attr->ct_attr.zone = act->ct.zone;
 	attr->ct_attr.ct_action = act->ct.action;
 	attr->ct_attr.nf_ft = act->ct.flow_table;
+	attr->ct_attr.act_miss_cookie = act->miss_cookie;
 
 	return 0;
 }
@@ -1782,7 +1783,7 @@ mlx5_tc_ct_del_ft_cb(struct mlx5_tc_ct_priv *ct_priv, struct mlx5_ct_ft *ft)
  *	+ ft prio (tc chain)  +
  *	+ original match      +
  *	+---------------------+
- *		 | set chain miss mapping
+ *		 | set act_miss_cookie mapping
  *		 | set fte_id
  *		 | set tunnel_id
  *		 | do decap
@@ -1827,7 +1828,7 @@ __mlx5_tc_ct_flow_offload(struct mlx5_tc_ct_priv *ct_priv,
 	struct mlx5_flow_attr *pre_ct_attr;
 	struct mlx5_modify_hdr *mod_hdr;
 	struct mlx5_ct_flow *ct_flow;
-	int chain_mapping = 0, err;
+	int act_miss_mapping = 0, err;
 	struct mlx5_ct_ft *ft;
 	u16 zone;
 
@@ -1862,22 +1863,18 @@ __mlx5_tc_ct_flow_offload(struct mlx5_tc_ct_priv *ct_priv,
 	pre_ct_attr->action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST |
 			       MLX5_FLOW_CONTEXT_ACTION_MOD_HDR;
 
-	/* Write chain miss tag for miss in ct table as we
-	 * don't go though all prios of this chain as normal tc rules
-	 * miss.
-	 */
-	err = mlx5_chains_get_chain_mapping(ct_priv->chains, attr->chain,
-					    &chain_mapping);
+	err = mlx5e_tc_action_miss_mapping_get(ct_priv->priv, attr, attr->ct_attr.act_miss_cookie,
+					       &act_miss_mapping);
 	if (err) {
-		ct_dbg("Failed to get chain register mapping for chain");
-		goto err_get_chain;
+		ct_dbg("Failed to get register mapping for act miss");
+		goto err_get_act_miss;
 	}
-	ct_flow->chain_mapping = chain_mapping;
+	attr->ct_attr.act_miss_mapping = act_miss_mapping;
 
 	err = mlx5e_tc_match_to_reg_set(priv->mdev, pre_mod_acts, ct_priv->ns_type,
-					MAPPED_OBJ_TO_REG, chain_mapping);
+					MAPPED_OBJ_TO_REG, act_miss_mapping);
 	if (err) {
-		ct_dbg("Failed to set chain register mapping");
+		ct_dbg("Failed to set act miss register mapping");
 		goto err_mapping;
 	}
 
@@ -1941,8 +1938,8 @@ __mlx5_tc_ct_flow_offload(struct mlx5_tc_ct_priv *ct_priv,
 	mlx5_modify_header_dealloc(priv->mdev, pre_ct_attr->modify_hdr);
 err_mapping:
 	mlx5e_mod_hdr_dealloc(pre_mod_acts);
-	mlx5_chains_put_chain_mapping(ct_priv->chains, ct_flow->chain_mapping);
-err_get_chain:
+	mlx5e_tc_action_miss_mapping_put(ct_priv->priv, attr, act_miss_mapping);
+err_get_act_miss:
 	kfree(ct_flow->pre_ct_attr);
 err_alloc_pre:
 	mlx5_tc_ct_del_ft_cb(ct_priv, ft);
@@ -1981,7 +1978,7 @@ __mlx5_tc_ct_delete_flow(struct mlx5_tc_ct_priv *ct_priv,
 	mlx5_tc_rule_delete(priv, ct_flow->pre_ct_rule, pre_ct_attr);
 	mlx5_modify_header_dealloc(priv->mdev, pre_ct_attr->modify_hdr);
 
-	mlx5_chains_put_chain_mapping(ct_priv->chains, ct_flow->chain_mapping);
+	mlx5e_tc_action_miss_mapping_put(ct_priv->priv, attr, attr->ct_attr.act_miss_mapping);
 	mlx5_tc_ct_del_ft_cb(ct_priv, ct_flow->ft);
 
 	kfree(ct_flow->pre_ct_attr);
@@ -2154,6 +2151,7 @@ mlx5_tc_ct_init(struct mlx5e_priv *priv, struct mlx5_fs_chains *chains,
 	}
 
 	spin_lock_init(&ct_priv->ht_lock);
+	ct_priv->priv = priv;
 	ct_priv->ns_type = ns_type;
 	ct_priv->chains = chains;
 	ct_priv->netdev = priv->netdev;
drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.h +2 -0
index 5bbd6b92840f..5c5ddaa83055 100644
@@ -28,6 +28,8 @@ struct mlx5_ct_attr {
 	struct mlx5_ct_flow *ct_flow;
 	struct nf_flowtable *nf_ft;
 	u32 ct_labels_id;
+	u32 act_miss_mapping;
+	u64 act_miss_cookie;
 };
 
 #define zone_to_reg_ct {\
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +57 -7

95 lines not on this page · raw message

drivers/net/ethernet/mellanox/mlx5/core/en_tc.h +6 -0
index 680333ab63fc..fda722fed6b8 100644
@@ -101,6 +101,7 @@ struct mlx5_flow_attr {
 	struct mlx5_flow_attr *branch_true;
 	struct mlx5_flow_attr *branch_false;
 	struct mlx5_flow_attr *jumping_attr;
+	struct mlx5_flow_handle *act_id_restore_rule;
 	/* keep this union last */
 	union {
 		DECLARE_FLEX_ARRAY(struct mlx5_esw_flow_attr, esw_attr);
@@ -402,4 +403,9 @@ mlx5e_tc_update_skb_nic(struct mlx5_cqe64 *cqe, struct sk_buff *skb)
 { return true; }
 #endif
 
+int mlx5e_tc_action_miss_mapping_get(struct mlx5e_priv *priv, struct mlx5_flow_attr *attr,
+				     u64 act_miss_cookie, u32 *act_miss_mapping);
+void mlx5e_tc_action_miss_mapping_put(struct mlx5e_priv *priv, struct mlx5_flow_attr *attr,
+				      u32 act_miss_mapping);
+
 #endif /* __MLX5_EN_TC_H__ */
drivers/net/ethernet/mellanox/mlx5/core/eswitch.h +2 -0
index fd03f076551b..19e9a77c4633 100644
@@ -52,12 +52,14 @@ enum mlx5_mapped_obj_type {
 	MLX5_MAPPED_OBJ_CHAIN,
 	MLX5_MAPPED_OBJ_SAMPLE,
 	MLX5_MAPPED_OBJ_INT_PORT_METADATA,
+	MLX5_MAPPED_OBJ_ACT_MISS,
 };
 
 struct mlx5_mapped_obj {
 	enum mlx5_mapped_obj_type type;
 	union {
 		u32 chain;
+		u64 act_miss_cookie;
 		struct {
 			u32 group_id;
 			u32 rate;
Signature · 1 line
2.30.1
#8 lore raw
In reply to Paul Blakey
Quoted 84 lines · Paul Blakey

Hi,

This series adds support for hardware miss to instruct tc to continue execution in a specific tc action instance on a filter's action list. The mlx5 driver patch (besides the refactors) shows its usage instead of using just chain restore.

Currently a filter's action list must be executed all together or not at all as driver are only able to tell tc to continue executing from a specific tc chain, and not a specific filter/action.

This is troublesome with regards to action CT, where new connections should be sent to software (via tc chain restore), and established connections can be handled in hardware.

Checking for new connections is done when executing the ct action in hardware (by checking the packet's tuple against known established tuples). But if there is a packet modification (pedit) action before action CT and the checked tuple is a new connection, hardware will need to revert the previous packet modifications before sending it back to software so it can re-match the same tc filter in software and re-execute its CT action.

The following is an example configuration of stateless nat on mlx5 driver that isn't supported before this patchet:

#Setup corrosponding mlx5 VFs in namespaces

 $ ip netns add ns0
 $ ip netns add ns1
 $ ip link set dev enp8s0f0v0 netns ns0
 $ ip netns exec ns0 ifconfig enp8s0f0v0 1.1.1.1/24 up
 $ ip link set dev enp8s0f0v1 netns ns1
 $ ip netns exec ns1 ifconfig enp8s0f0v1 1.1.1.2/24 up

#Setup tc arp and ct rules on mxl5 VF representors

 $ tc qdisc add dev enp8s0f0_0 ingress
 $ tc qdisc add dev enp8s0f0_1 ingress
 $ ifconfig enp8s0f0_0 up
 $ ifconfig enp8s0f0_1 up

#Original side

 $ tc filter add dev enp8s0f0_0 ingress chain 0 proto ip flower \
    ct_state -trk ip_proto tcp dst_port 8888 \
      action pedit ex munge tcp dport set 5001 pipe \
      action csum ip tcp pipe \
      action ct pipe \
      action goto chain 1
 $ tc filter add dev enp8s0f0_0 ingress chain 1 proto ip flower \
    ct_state +trk+est \
      action mirred egress redirect dev enp8s0f0_1
 $ tc filter add dev enp8s0f0_0 ingress chain 1 proto ip flower \
    ct_state +trk+new \
      action ct commit pipe \
      action mirred egress redirect dev enp8s0f0_1
 $ tc filter add dev enp8s0f0_0 ingress chain 0 proto arp flower \
      action mirred egress redirect dev enp8s0f0_1

#Reply side

 $ tc filter add dev enp8s0f0_1 ingress chain 0 proto arp flower \
      action mirred egress redirect dev enp8s0f0_0
 $ tc filter add dev enp8s0f0_1 ingress chain 0 proto ip flower \
    ct_state -trk ip_proto tcp \ 
      action ct pipe \
      action pedit ex munge tcp sport set 8888 pipe \
      action csum ip tcp pipe \
      action mirred egress redirect dev enp8s0f0_0

#Run traffic

 $ ip netns exec ns1 iperf -s -p 5001&
 $ sleep 2 #wait for iperf to fully open
 $ ip netns exec ns0 iperf -c 1.1.1.2 -p 8888

#dump tc filter stats on enp8s0f0_0 chain 0 rule and see hardware packets:

 $ tc -s filter show dev enp8s0f0_0 ingress chain 0 proto ip | grep "hardware.*pkt"
        Sent hardware 9310116832 bytes 6149672 pkt
        Sent hardware 9310116832 bytes 6149672 pkt
        Sent hardware 9310116832 bytes 6149672 pkt

A new connection executing the first filter in hardware will first rewrite the dst port to the new port, and then the ct action is executed, because this is a new connection, hardware will need to be send this back to software, on chain 0, to execute the first filter again in software. The dst port needs to be reverted otherwise it won't re-match the old dst port in the first filter. Because of that, currently mlx5 driver will reject offloading the above action ct rule.

Quoted 1 line

This series adds supports partial offload of a filter's action list,

As I said on v9, this sentence is very confusing and leads to the interpretation can some actions can be in_hw and some not. Please change it, so we don't have to keep fighting this misinterpretation later on.

Quoted 4 lines

and letting tc software continue processing in the specific action instance where hardware left off (in the above case after the "action pedit ex munge tcp dport... of the first rule") allowing support for scenarios such as the above.