Skip to contentSkip to conversation

ARM: dts: aspeed: p10bmc: Reorganize FSI tree and add I2C responders

PATCH Superseded Eddie James 1 participant 1 message Mar 10, 2023

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: aspeed: p10bmc: Reorganize FSI tree and add I2C responders

Since three systems have at least some of the FSI tree in common, reorganize the FSI tree into include files. In addition, add the I2C responders and associated engines.

---
 arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts |  336 +---
 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 1683 ++++++++++--------
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts |  678 +------
 arch/arm/boot/dts/ibm-power10-dual.dtsi      |  830 +++++++++
 arch/arm/boot/dts/ibm-power10-quad.dtsi      |  825 +++++++++
 5 files changed, 2647 insertions(+), 1705 deletions(-)
 create mode 100644 arch/arm/boot/dts/ibm-power10-dual.dtsi
 create mode 100644 arch/arm/boot/dts/ibm-power10-quad.dtsi
arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts +2 -334
index 79516dc21c01..2f75677ea8f3 100644
@@ -12,38 +12,11 @@ / {
 	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
 
 	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c115 = &cfam0_i2c15;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c214 = &cfam1_i2c14;
-		i2c215 = &cfam1_i2c15;
-		i2c216 = &cfam1_i2c16;
-		i2c217 = &cfam1_i2c17;
-
 		serial4 = &uart5;
 		i2c16 = &i2c11mux0chn0;
 		i2c17 = &i2c11mux0chn1;
 		i2c18 = &i2c11mux0chn2;
 		i2c19 = &i2c11mux0chn3;
-
-		spi10 = &cfam0_spi0;
-		spi11 = &cfam0_spi1;
-		spi12 = &cfam0_spi2;
-		spi13 = &cfam0_spi3;
-		spi20 = &cfam1_spi0;
-		spi21 = &cfam1_spi1;
-		spi22 = &cfam1_spi2;
-		spi23 = &cfam1_spi3;
-
 	};
 
 	chosen {
@@ -197,313 +170,6 @@ &emmc {
 	clk-phase-mmc-hs200 = <180>, <180>;
 };
 
-&fsim0 {
-	status = "okay";
-
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam@0,0 {
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OMI01 */
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OMI23 */
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam0_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ0: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&fsi_hub0 {
-	cfam@1,0 {
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OMI45 */
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OMI67 */
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam1_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam1_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam1_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ1: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub1: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
 &ibt {
 	status = "okay";
 };
@@ -913,3 +579,5 @@ &kcs3 {
 	aspeed,lpc-io-reg = <0xca2>;
 	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 };
+
+#include "ibm-power10-dual.dtsi"
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +988 -695

2,004 lines not on this page · raw message

arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +2 -676

640 lines not on this page · raw message

arch/arm/boot/dts/ibm-power10-dual.dtsi new file +830 -0

830 lines not on this page · raw message

arch/arm/boot/dts/ibm-power10-quad.dtsi new file +825 -0

825 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.31.1

Part of the diff is not shown here. View the raw message.