test_vboot.py: include test of fdt_add_pubkey tool
PATCH v3 1/1 test_vboot.py: include test of fdt_add_pubkey tool
From: Roman Kopytin <[email protected]>
--- test/py/tests/test_vboot.py | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
test/py/tests/test_vboot.py +33 -0
@@ -491,6 +491,37 @@ def test_vboot(u_boot_console, name, sha_algo, padding, sign_options, required, # Check that the boot fails if the global signature is not provided run_bootm(sha_algo, 'global image signature', 'signature is mandatory', False) + def test_fdt_add_pubkey(sha_algo, padding, sign_options): + """Test fdt_add_pubkey utility with given hash algorithm and padding. + + This function tests if fdt_add_pubkey utility may add public keys into dtb. + + Args: + sha_algo: Either 'sha1' or 'sha256', to select the algorithm to use + padding: Either '' or '-pss', to select the padding to use for the + rsa signature algorithm. + sign_options: Options to mkimage when signing a fit image. + """ + + # Create a fresh .dtb without the public keys + dtc('sandbox-u-boot.dts') + make_fit('sign-configs-%s%s.its' % (sha_algo, padding)) + + # Sign images with our dev keys + sign_fit(sha_algo, sign_options) + + # Create a fresh .dtb without the public keys + dtc('sandbox-u-boot.dts') + + cons.log.action('%s: Test fdt_add_pubkey with signed configuration' % sha_algo) + # Then add the dev key via the fdt_add_pubkey tool + util.run_and_log(cons, [fdt_add_pubkey, '-a', '%s,%s' % ('sha256' if algo_arg else sha_algo, \ + 'rsa3072' if sha_algo == 'sha384' else 'rsa2048'), + '-k', tmpdir, '-n', 'dev', '-r', 'conf', dtb]) + + # Check with fit_check_sign that FIT is signed with key + util.run_and_log(cons, [fit_check_sign, '-f', fit, '-k', dtb]) + cons = u_boot_console tmpdir = os.path.join(cons.config.result_dir, name) + '/' if not os.path.exists(tmpdir):
@@ -500,6 +531,7 @@ def test_vboot(u_boot_console, name, sha_algo, padding, sign_options, required, mkimage = cons.config.build_dir + '/tools/mkimage' binman = cons.config.source_dir + '/tools/binman/binman' fit_check_sign = cons.config.build_dir + '/tools/fit_check_sign' + fdt_add_pubkey = cons.config.build_dir + '/tools/fdt_add_pubkey' dtc_args = '-I dts -O dtb -i %s' % tmpdir dtb = '%ssandbox-u-boot.dtb' % tmpdir sig_node = '/configurations/conf-1/signature'
@@ -516,6 +548,7 @@ def test_vboot(u_boot_console, name, sha_algo, padding, sign_options, required, with open(evil_kernel, 'wb') as fd: fd.write(500 * b'\x01') + test_fdt_add_pubkey(sha_algo, padding, sign_options) try: # We need to use our own device tree file. Remember to restore it # afterwards.
Signature · 1 line
2.39.1
Hi Ivan,
Quoted 2 lines · Ivan Mikhaylov
From: Roman Kopytin <[email protected]>
Please add a commit message.
Quoted 67 lines
Signed-off-by Roman Kopytin <[email protected]>Signed-off-by Ivan Mikhaylov <[email protected]>Cc Rasmus Villemoes <[email protected]>--- test/py/tests/test_vboot.py | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)test/py/tests/test_vboot.py +33
-1@@ -491,6 +491,37 @@ def test_vboot(u_boot_console, name, sha_algo, padding, sign_options, required, # Check that the boot fails if the global signature is not provided run_bootm(sha_algo, 'global image signature', 'signature is mandatory', False) + def test_fdt_add_pubkey(sha_algo, padding, sign_options): + """Test fdt_add_pubkey utility with given hash algorithm and padding. + + This function tests if fdt_add_pubkey utility may add public keys into dtb. + + Args: + sha_algo: Either 'sha1' or 'sha256', to select the algorithm to use + padding: Either '' or '-pss', to select the padding to use for the + rsa signature algorithm. + sign_options: Options to mkimage when signing a fit image. + """ + + # Create a fresh .dtb without the public keys + dtc('sandbox-u-boot.dts') + make_fit('sign-configs-%s%s.its' % (sha_algo, padding)) + + # Sign images with our dev keys + sign_fit(sha_algo, sign_options) + + # Create a fresh .dtb without the public keys + dtc('sandbox-u-boot.dts') + + cons.log.action('%s: Test fdt_add_pubkey with signed configuration' % sha_algo) + # Then add the dev key via the fdt_add_pubkey tool + util.run_and_log(cons, [fdt_add_pubkey, '-a', '%s,%s' % ('sha256' if algo_arg else sha_algo, \ + 'rsa3072' if sha_algo == 'sha384' else 'rsa2048'), + '-k', tmpdir, '-n', 'dev', '-r', 'conf', dtb]) + + # Check with fit_check_sign that FIT is signed with key + util.run_and_log(cons, [fit_check_sign, '-f', fit, '-k', dtb]) + cons = u_boot_console tmpdir = os.path.join(cons.config.result_dir, name) + '/' if not os.path.exists(tmpdir):@@ -500,6 +531,7 @@ def test_vboot(u_boot_console, name, sha_algo, padding, sign_options, required, mkimage = cons.config.build_dir + '/tools/mkimage' binman = cons.config.source_dir + '/tools/binman/binman' fit_check_sign = cons.config.build_dir + '/tools/fit_check_sign' + fdt_add_pubkey = cons.config.build_dir + '/tools/fdt_add_pubkey' dtc_args = '-I dts -O dtb -i %s' % tmpdir dtb = '%ssandbox-u-boot.dtb' % tmpdir sig_node = '/configurations/conf-1/signature'@@ -516,6 +548,7 @@ def test_vboot(u_boot_console, name, sha_algo, padding, sign_options, required, with open(evil_kernel, 'wb') as fd: fd.write(500 * b'\x01') + test_fdt_add_pubkey(sha_algo, padding, sign_options) try: # We need to use our own device tree file. Remember to restore it # afterwards. --
Quoted 2 lines
2.39.1
I'm not sure how you are testing this, but it fails for me:
+openssl req -batch -new -x509 -key /tmp/b/sandbox/sha256-global-sign-pss/prod.key -out /tmp/b/sandbox/sha256-global-sign-pss/prod.crt
+dtc -I dts -O dtb -i /tmp/b/sandbox/sha256-global-sign-pss/ /home/sjg/c/src/third_party/u-boot/files/test/py/tests/vboot/sandbox-u-boot.dts -O dtb -o /tmp/b/sandbox/sha256-global-sign-pss/sandbox-u-boot.dtb /home/sjg/c/src/third_party/u-boot/files/test/py/tests/vboot/sandbox-u-boot.dts:10.10-12.4:
Warning (unit_address_vs_reg): /reset@0: node has a unit name, but no
reg or ranges property
+/tmp/b/sandbox/tools/mkimage -D -I dts -O dtb -i /tmp/b/sandbox/sha256-global-sign-pss/ -f /home/sjg/c/src/third_party/u-boot/files/test/py/tests/vboot/sign-configs-sha256-pss.its /tmp/b/sandbox/sha256-global-sign-pss/test.fit
FATAL ERROR: Couldn't open "sandbox-kernel.dtb": No such file or directory /tmp/b/sandbox/tools/mkimage: Can't open /tmp/b/sandbox/sha256-global-sign-pss/test.fit.tmp: No such file or directory
Error: Bad parameters for FIT image type
Usage: /tmp/b/sandbox/tools/mkimage [-T type] -l image
-l ==> list image header information
-T ==> parse image file as 'type'
-q ==> quiet
/tmp/b/sandbox/tools/mkimage [-x] -A arch -O os -T type -C comp
-a addr -e ep -n name -d data_file[:data_file...] image
-A ==> set architecture to 'arch'
-O ==> set operating system to 'os'
-T ==> set image type to 'type'
-C ==> set compression type 'comp'
-a ==> set load address to 'addr' (hex)
-e ==> set entry point to 'ep' (hex)
-n ==> set image name to 'name'
-R ==> set second image name to 'name'
-d ==> use image data from 'datafile'
-x ==> set XIP (execute in place)
-s ==> create an image with no data
-v ==> verbose
/tmp/b/sandbox/tools/mkimage [-D dtc_options] [-ffit-image.its|-f auto|-f auto-conf|-F] [-b <dtb> [-b <dtb>]] [-E] [-B
size] [-i <ramdisk.cpio.gz>] fit-image
<dtb> file is used with -f auto, it may occur multiple times.
-D => set all options for device tree compiler
-f => input filename for FIT source
-i => input filename for ramdisk file
-E => place data outside of the FIT structure
-B => align size in hex for FIT structure and header
-b => append the device tree binary to the FIT
-t => update the timestamp in the FIT
Signing / verified boot options: [-k keydir] [-K dtb] [ -c <comment>]
[-p addr] [-r] [-N engine]
-k => set directory containing private keys
-K => write public keys to this .dtb file
-g => set key name hint
-G => use this signing key (in lieu of -k)
-c => add comment in signature node
-F => re-sign existing FIT image
-p => place external data at a static position
-r => mark keys used as 'required' in dtb
-N => openssl engine to use for signing
-o => algorithm to use for signing
/tmp/b/sandbox/tools/mkimage -V ==> print version information and exit
Use '-T list' to see a list of available image types
Long options are available; read the man page for details
Exit code: 1
================================================== short test summary
info ==================================================
FAILED test/py/tests/test_vboot.py::test_vboot[sha1-basic-sha1--None-False-True-False-False]
- ValueError: Exit code: 1
FAILED test/py/tests/test_vboot.py::test_vboot[sha1-pad-sha1---E -p 0x10000-False-False-False-False] - ValueError: Exit co...
FAILED test/py/tests/test_vboot.py::test_vboot[sha1-pss-sha1--pss-None-False-False-False-False]
- ValueError: Exit code: 1
FAILED test/py/tests/test_vboot.py::test_vboot[sha1-pss-pad-sha1--pss--E
-p 0x10000-False-False-False-False] - ValueError:...
FAILED test/py/tests/test_vboot.py::test_vboot[sha256-basic-sha256--None-False-False-False-False]
- ValueError: Exit code: 1
FAILED test/py/tests/test_vboot.py::test_vboot[sha256-pad-sha256---E
-p 0x10000-False-False-False-False] - ValueError: Exi...
FAILED test/py/tests/test_vboot.py::test_vboot[sha256-pss-sha256--pss-None-False-False-False-False]
- ValueError: Exit cod...
FAILED test/py/tests/test_vboot.py::test_vboot[sha256-pss-pad-sha256--pss--E
-p 0x10000-False-False-False-False] - ValueEr...
FAILED test/py/tests/test_vboot.py::test_vboot[sha256-pss-required-sha256--pss-None-True-False-False-False]
- ValueError: ...
FAILED test/py/tests/test_vboot.py::test_vboot[sha256-pss-pad-required-sha256--pss--E
-p 0x10000-True-True-False-False] - ...
FAILED test/py/tests/test_vboot.py::test_vboot[sha384-basic-sha384--None-False-False-False-False]
- ValueError: Exit code: 1
FAILED test/py/tests/test_vboot.py::test_vboot[sha384-pad-sha384---E
-p 0x10000-False-False-False-False] - ValueError: Exi...
FAILED test/py/tests/test_vboot.py::test_vboot[algo-arg-algo-arg---o sha256,rsa2048-False-False-True-False] - ValueError: ...
FAILED test/py/tests/test_vboot.py::test_vboot[sha256-global-sign-sha256---False-False-False-True]
- ValueError: Exit code: 1
FAILED test/py/tests/test_vboot.py::test_vboot[sha256-global-sign-pss-sha256--pss--False-False-False-True]
- ValueError: E...
If it helps, my alias to run a test is:
# Run a pytest on sandbox
# $1: Name of test to run (optional, else run all)
function pyt {
local tests
local para
if [ "$1" = "-b" ]; then
crosfw $b || return 1
shift
fi
if [ "$1" = "-p" ]; then
para="-n$(nproc) -q"
shift
fi
tests="$@"
echo $para $tests
shifttest/py/test.py -B sandbox --build-dir /tmp/b/sandbox ${para} ${tests:+"-k $tests"} $@
}
and I build sandbox into /tmp/b/sandbox before typing 'pyt vboot' to run the test.
Also, when I mention adding it to its own test, I mean creating a new function (like test_vboot() but at the end of the file and without unnecessary parameterized arguments) to do your check. There is no need to embed it in the existing test and I think it actually confuses things, since the existing test already adds the public key to the DT.
With a separate test you can still use some code from test_vboot() if you need to - just break it into a separate helper that both test functions can call. Your test should simple create a DT, add a key to it and then check that the key is there (using fit_check_sign for that is fine).
Regards,
Simon