Skip to contentSkip to conversation

fdt: Make fdt addr -q quieter

PATCH In review Peter Hoyes 3 participants 4 messages Mar 21, 2023 – Apr 2, 2023

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 fdt: Make fdt addr -q quieter

From: Peter Hoyes <[email protected]>

64597346 "fdt: Add -q option to fdt addr for distro_bootcmd" introduced the -q option for fdt addr, which sets the current working fdt address without printing any output.

baf41410 "fdt: Show a message when the working FDT changes" made the utility function set_working_fdt_addr (in cmd/fdt.c) output a message on each invocation, even if called via fdt addr -q, in which case its output is now slightly noisier.

To fix this, split out set_working_fdt_addr into set_working_fdt_addr plus the static function set_working_fdt_addr_quiet. set_working_fdt_addr_quiet can be called by "quiet" fdt cmd logic and set_working_fdt_addr is exported (as before) to other boot logic. The latter calls the former.

Remove the assertion from the fdt addr test case when calling with the -q argument.

---
 cmd/fdt.c      | 19 ++++++++++++++-----
 test/cmd/fdt.c |  1 -
 2 files changed, 14 insertions(+), 6 deletions(-)
cmd/fdt.c +14 -5
index f38fe909c3..f1f2ef6a12 100644
@@ -36,16 +36,21 @@ static int is_printable_string(const void *data, int len);
  */
 struct fdt_header *working_fdt;
 
-void set_working_fdt_addr(ulong addr)
+static void set_working_fdt_addr_quiet(ulong addr)
 {
 	void *buf;
 
-	printf("Working FDT set to %lx\n", addr);
 	buf = map_sysmem(addr, 0);
 	working_fdt = buf;
 	env_set_hex("fdtaddr", addr);
 }
 
+void set_working_fdt_addr(ulong addr)
+{
+	printf("Working FDT set to %lx\n", addr);
+	set_working_fdt_addr_quiet(addr);
+}
+
 /*
  * Get a value from the fdt and format it to be set in the environment
  */
@@ -192,10 +197,14 @@ static int do_fdt(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 		if ((quiet && fdt_check_header(blob)) ||
 		    (!quiet && !fdt_valid(&blob)))
 			return 1;
-		if (control)
+		if (control) {
 			gd->fdt_blob = blob;
-		else
-			set_working_fdt_addr(addr);
+		} else {
+			if (quiet)
+				set_working_fdt_addr_quiet(addr);
+			else
+				set_working_fdt_addr(addr);
+		}
 
 		if (argc >= 2) {
 			int  len;
test/cmd/fdt.c +0 -1
index cdbaf8c425..85b96c614b 100644
@@ -229,7 +229,6 @@ static int fdt_test_addr_resize(struct unit_test_state *uts)
 
 	/* ...quietly */
 	ut_assertok(run_commandf("fdt addr -q %08x %x", addr, sizeof(fdt) / 4));
-	ut_assert_nextline("Working FDT set to %lx", addr);
 	ut_assertok(ut_check_console_end(uts));
 
 	/* We cannot easily provoke errors in fdt_open_into(), so ignore that */
Signature · 1 line
2.34.1
Reviewed-by on v2 1/1
#1 lore raw
Quoted 17 lines · Peter Hoyes

From: Peter Hoyes <[email protected]>

64597346 "fdt: Add -q option to fdt addr for distro_bootcmd" introduced the -q option for fdt addr, which sets the current working fdt address without printing any output.

baf41410 "fdt: Show a message when the working FDT changes" made the utility function set_working_fdt_addr (in cmd/fdt.c) output a message on each invocation, even if called via fdt addr -q, in which case its output is now slightly noisier.

To fix this, split out set_working_fdt_addr into set_working_fdt_addr plus the static function set_working_fdt_addr_quiet. set_working_fdt_addr_quiet can be called by "quiet" fdt cmd logic and set_working_fdt_addr is exported (as before) to other boot logic. The latter calls the former.

Quoted 4 lines

Remove the assertion from the fdt addr test case when calling with the -q argument.

Thanks !

Reviewed-by
#2 lore raw
Quoted 19 lines · Marek Vasut
Quoted 17 lines · Peter Hoyes

From: Peter Hoyes <[email protected]>

64597346 "fdt: Add -q option to fdt addr for distro_bootcmd" introduced the -q option for fdt addr, which sets the current working fdt address without printing any output.

baf41410 "fdt: Show a message when the working FDT changes" made the utility function set_working_fdt_addr (in cmd/fdt.c) output a message on each invocation, even if called via fdt addr -q, in which case its output is now slightly noisier.

To fix this, split out set_working_fdt_addr into set_working_fdt_addr plus the static function set_working_fdt_addr_quiet. set_working_fdt_addr_quiet can be called by "quiet" fdt cmd logic and set_working_fdt_addr is exported (as before) to other boot logic. The latter calls the former.

Quoted 6 lines
Quoted 4 lines

Remove the assertion from the fdt addr test case when calling with the -q argument.

Reviewed-by
#3 lore raw
Quoted 19 lines · Marek Vasut
Quoted 17 lines · Peter Hoyes

From: Peter Hoyes <[email protected]>

64597346 "fdt: Add -q option to fdt addr for distro_bootcmd" introduced the -q option for fdt addr, which sets the current working fdt address without printing any output.

baf41410 "fdt: Show a message when the working FDT changes" made the utility function set_working_fdt_addr (in cmd/fdt.c) output a message on each invocation, even if called via fdt addr -q, in which case its output is now slightly noisier.

To fix this, split out set_working_fdt_addr into set_working_fdt_addr plus the static function set_working_fdt_addr_quiet. set_working_fdt_addr_quiet can be called by "quiet" fdt cmd logic and set_working_fdt_addr is exported (as before) to other boot logic. The latter calls the former.

Quoted 6 lines
Quoted 4 lines

Remove the assertion from the fdt addr test case when calling with the -q argument.

Applied to u-boot-dm/next, thanks!