Skip to contentSkip to conversation

crypto: ccp - Clear PSP interrupt status register before calling handler

PATCH In review Jeremi Piotrowski 3 participants 3 messages Mar 28, 2023 – Apr 6, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 crypto: ccp - Clear PSP interrupt status register before calling handler

The PSP IRQ is edge-triggered (MSI or MSI-X) in all cases supported by the psp module so clear the interrupt status register early in the handler to prevent missed interrupts. sev_irq_handler() calls wake_up() on a wait queue, which can result in a new command being submitted from a different CPU. This then races with the clearing of isr and can result in missed interrupts. A missed interrupt results in a command waiting until it times out, which results in the psp being declared dead.

This is unlikely on bare metal, but has been observed when running virtualized. In the cases where this is observed, sev->cmdresp_reg has PSP_CMDRESP_RESP set which indicates that the command was processed correctly but no interrupt was asserted.

The full sequence of events looks like this:

CPU 1: submits SEV cmd #1
CPU 1: calls wait_event_timeout()
CPU 0: enters psp_irq_handler()
CPU 0: calls sev_handler()->wake_up()
CPU 1: wakes up; finishes processing cmd #1
CPU 1: submits SEV cmd #2
CPU 1: calls wait_event_timeout()
PSP:   finishes processing cmd #2; interrupt status is still set; no interrupt
CPU 0: clears intsts
CPU 0: exits psp_irq_handler()
CPU 1: wait_event_timeout() times out; psp_dead=true
Fixes 200664d5237f ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
---
 drivers/crypto/ccp/psp-dev.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/crypto/ccp/psp-dev.c +3 -3
index c9c741ac8442..949a3fa0b94a 100644
@@ -42,6 +42,9 @@ static irqreturn_t psp_irq_handler(int irq, void *data)
 	/* Read the interrupt status: */
 	status = ioread32(psp->io_regs + psp->vdata->intsts_reg);
 
+	/* Clear the interrupt status by writing the same value we read. */
+	iowrite32(status, psp->io_regs + psp->vdata->intsts_reg);
+
 	/* invoke subdevice interrupt handlers */
 	if (status) {
 		if (psp->sev_irq_handler)
@@ -51,9 +54,6 @@ static irqreturn_t psp_irq_handler(int irq, void *data)
 			psp->tee_irq_handler(irq, psp->tee_irq_data, status);
 	}
 
-	/* Clear the interrupt status by writing the same value we read. */
-	iowrite32(status, psp->io_regs + psp->vdata->intsts_reg);
-
 	return IRQ_HANDLED;
 }
 
Signature · 1 line
2.34.1
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 27 lines · Jeremi Piotrowski

The PSP IRQ is edge-triggered (MSI or MSI-X) in all cases supported by the psp module so clear the interrupt status register early in the handler to prevent missed interrupts. sev_irq_handler() calls wake_up() on a wait queue, which can result in a new command being submitted from a different CPU. This then races with the clearing of isr and can result in missed interrupts. A missed interrupt results in a command waiting until it times out, which results in the psp being declared dead.

This is unlikely on bare metal, but has been observed when running virtualized. In the cases where this is observed, sev->cmdresp_reg has PSP_CMDRESP_RESP set which indicates that the command was processed correctly but no interrupt was asserted.

The full sequence of events looks like this:

CPU 1: submits SEV cmd #1
CPU 1: calls wait_event_timeout()
CPU 0: enters psp_irq_handler()
CPU 0: calls sev_handler()->wake_up()
CPU 1: wakes up; finishes processing cmd #1
CPU 1: submits SEV cmd #2
CPU 1: calls wait_event_timeout()
PSP:   finishes processing cmd #2; interrupt status is still set; no interrupt
CPU 0: clears intsts
CPU 0: exits psp_irq_handler()
CPU 1: wait_event_timeout() times out; psp_dead=true
Quoted 3 lines
Fixes 200664d5237f ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Quoted 28 lines
---
  drivers/crypto/ccp/psp-dev.c | 6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)
drivers/crypto/ccp/psp-dev.c +3 -3
index c9c741ac8442..949a3fa0b94a 100644
@@ -42,6 +42,9 @@ static irqreturn_t psp_irq_handler(int irq, void *data)
  	/* Read the interrupt status: */
  	status = ioread32(psp->io_regs + psp->vdata->intsts_reg);
 
+	/* Clear the interrupt status by writing the same value we read. */
+	iowrite32(status, psp->io_regs + psp->vdata->intsts_reg);
+
  	/* invoke subdevice interrupt handlers */
  	if (status) {
  		if (psp->sev_irq_handler)
@@ -51,9 +54,6 @@ static irqreturn_t psp_irq_handler(int irq, void *data)
  			psp->tee_irq_handler(irq, psp->tee_irq_data, status);
  	}
 
-	/* Clear the interrupt status by writing the same value we read. */
-	iowrite32(status, psp->io_regs + psp->vdata->intsts_reg);
-
  	return IRQ_HANDLED;
  }
 
maintainer
#2 lore raw
In reply to Jeremi Piotrowski
Quoted 27 lines · Jeremi Piotrowski

The PSP IRQ is edge-triggered (MSI or MSI-X) in all cases supported by the psp module so clear the interrupt status register early in the handler to prevent missed interrupts. sev_irq_handler() calls wake_up() on a wait queue, which can result in a new command being submitted from a different CPU. This then races with the clearing of isr and can result in missed interrupts. A missed interrupt results in a command waiting until it times out, which results in the psp being declared dead.

This is unlikely on bare metal, but has been observed when running virtualized. In the cases where this is observed, sev->cmdresp_reg has PSP_CMDRESP_RESP set which indicates that the command was processed correctly but no interrupt was asserted.

The full sequence of events looks like this:

CPU 1: submits SEV cmd #1
CPU 1: calls wait_event_timeout()
CPU 0: enters psp_irq_handler()
CPU 0: calls sev_handler()->wake_up()
CPU 1: wakes up; finishes processing cmd #1
CPU 1: submits SEV cmd #2
CPU 1: calls wait_event_timeout()
PSP:   finishes processing cmd #2; interrupt status is still set; no interrupt
CPU 0: clears intsts
CPU 0: exits psp_irq_handler()
CPU 1: wait_event_timeout() times out; psp_dead=true
Quoted 6 lines
Fixes 200664d5237f ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
---
 drivers/crypto/ccp/psp-dev.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Patch applied. Thanks.

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt