Skip to contentSkip to conversation

wifi: mt76: mt7921: add Netgear AXE3000 (A8000) support

PATCH New Reese Russell 1 participant 1 message Apr 4, 2023

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 wifi: mt76: mt7921: add Netgear AXE3000 (A8000) support

Issue: Though the Netgear AXE3000 (A8000) is based on the mt7921 chipset because of the unique USB VID:PID combination this device does not initialize/register. Thus making it not plug and play.

Fix: Adds support for the Netgear AXE3000 (A8000) based on the Mediatek mt7921au chipset. The method of action is adding the USD VID/PID pair to the mt7921u_device_table[] array.

Notes: A retail sample of the Netgear AXE3000 (A8000) yeilds the following from lsusb D 0846:9060 NetGear, Inc. Wireless_Device. This pair 0846:9060 VID:PID has been reported by other users on Github.

---
 drivers/net/wireless/mediatek/mt76/mt7921/usb.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/wireless/mediatek/mt76/mt7921/usb.c +3 -0
index 8fef09ed29c9..a08d20d5c556 100644
@@ -18,6 +18,9 @@ static const struct usb_device_id mt7921u_device_table[] = {
 	/* Comfast CF-952AX */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x3574, 0x6211, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)MT7921_FIRMWARE_WM },
+	/* Netgear, Inc. [A8000,AXE3000] */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9060, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)MT7921_FIRMWARE_WM },
 	{ },
 };
 
Signature · 1 line
2.34.1