include: update nf_tables uapi header
Florian Westphal
maintainerPATCH 1/2 include: update nf_tables uapi header
Taken from nf-next.
--- include/linux/netfilter/nf_tables.h | 59 ++++++++++++++++++++++++++--- 1 file changed, 54 insertions(+), 5 deletions(-)
include/linux/netfilter/nf_tables.h +54 -5
@@ -97,6 +97,14 @@ enum nft_verdicts {* @NFT_MSG_NEWFLOWTABLE: add new flow table (enum nft_flowtable_attributes) * @NFT_MSG_GETFLOWTABLE: get flow table (enum nft_flowtable_attributes) * @NFT_MSG_DELFLOWTABLE: delete flow table (enum nft_flowtable_attributes) +* @NFT_MSG_GETRULE_RESET: get rules and reset stateful expressions (enum nft_obj_attributes) +* @NFT_MSG_DESTROYTABLE: destroy a table (enum nft_table_attributes) +* @NFT_MSG_DESTROYCHAIN: destroy a chain (enum nft_chain_attributes) +* @NFT_MSG_DESTROYRULE: destroy a rule (enum nft_rule_attributes) +* @NFT_MSG_DESTROYSET: destroy a set (enum nft_set_attributes) +* @NFT_MSG_DESTROYSETELEM: destroy a set element (enum nft_set_elem_attributes) +* @NFT_MSG_DESTROYOBJ: destroy a stateful object (enum nft_object_attributes) +* @NFT_MSG_DESTROYFLOWTABLE: destroy flow table (enum nft_flowtable_attributes) */ enum nf_tables_msg_types {NFT_MSG_NEWTABLE ,
@@ -124,6 +132,14 @@ enum nf_tables_msg_types {NFT_MSG_NEWFLOWTABLE ,NFT_MSG_GETFLOWTABLE ,NFT_MSG_DELFLOWTABLE , +NFT_MSG_GETRULE_RESET , +NFT_MSG_DESTROYTABLE , +NFT_MSG_DESTROYCHAIN , +NFT_MSG_DESTROYRULE , +NFT_MSG_DESTROYSET , +NFT_MSG_DESTROYSETELEM , +NFT_MSG_DESTROYOBJ , +NFT_MSG_DESTROYFLOWTABLE , NFT_MSG_MAX, };
@@ -669,7 +685,7 @@ enum nft_range_ops {* enum nft_range_attributes - nf_tables range expression netlink attributes * * @NFTA_RANGE_SREG: source register of data to compare (NLA_U32: nft_registers) -* @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_cmp_ops) +* @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_range_ops) * @NFTA_RANGE_FROM_DATA: data range from (NLA_NESTED: nft_data_attributes) * @NFTA_RANGE_TO_DATA: data range to (NLA_NESTED: nft_data_attributes) */
@@ -753,11 +769,14 @@ enum nft_dynset_attributes {* @NFT_PAYLOAD_LL_HEADER: link layer header * @NFT_PAYLOAD_NETWORK_HEADER: network header * @NFT_PAYLOAD_TRANSPORT_HEADER: transport header +* @NFT_PAYLOAD_INNER_HEADER: inner header / payload */ enum nft_payload_bases {NFT_PAYLOAD_LL_HEADER ,NFT_PAYLOAD_NETWORK_HEADER ,NFT_PAYLOAD_TRANSPORT_HEADER , +NFT_PAYLOAD_INNER_HEADER , +NFT_PAYLOAD_TUN_HEADER , };/**
@@ -777,6 +796,32 @@ enum nft_payload_csum_flags { NFT_PAYLOAD_L4CSUM_PSEUDOHDR = (1 << 0), }; +enum nft_inner_type { +NFT_INNER_UNSPEC =0 , +NFT_INNER_VXLAN , +NFT_INNER_GENEVE , +}; + +enum nft_inner_flags { +NFT_INNER_HDRSIZE = (1 <<0 ), +NFT_INNER_LL = (1 <<1 ), +NFT_INNER_NH = (1 <<2 ), +NFT_INNER_TH = (1 <<3 ), +}; +#define NFT_INNER_MASK (NFT_INNER_HDRSIZE | NFT_INNER_LL | \ + NFT_INNER_NH | NFT_INNER_TH) + +enum nft_inner_attributes { +NFTA_INNER_UNSPEC , +NFTA_INNER_NUM , +NFTA_INNER_TYPE , +NFTA_INNER_FLAGS , +NFTA_INNER_HDRSIZE , +NFTA_INNER_EXPR , + __NFTA_INNER_MAX +}; +#define NFTA_INNER_MAX (__NFTA_INNER_MAX - 1) +/** * enum nft_payload_attributes - nf_tables payload expression netlink attributes *
@@ -833,7 +878,7 @@ enum nft_exthdr_op {* @NFTA_EXTHDR_LEN: extension header length (NLA_U32) * @NFTA_EXTHDR_FLAGS: extension header flags (NLA_U32) * @NFTA_EXTHDR_OP: option match type (NLA_U32) -* @NFTA_EXTHDR_SREG: option match type (NLA_U32) +* @NFTA_EXTHDR_SREG: source register (NLA_U32: nft_registers) */ enum nft_exthdr_attributes {NFTA_EXTHDR_UNSPEC ,
@@ -886,6 +931,7 @@ enum nft_exthdr_attributes {* @NFT_META_TIME_HOUR: hour of day (in seconds) * @NFT_META_SDIF: slave device interface index * @NFT_META_SDIFNAME: slave device interface name +* @NFT_META_BRI_BROUTE: packet br_netfilter_broute bit */ enum nft_meta_keys {NFT_META_LEN ,
@@ -896,7 +942,8 @@ enum nft_meta_keys {NFT_META_OIF ,NFT_META_IIFNAME ,NFT_META_OIFNAME , -NFT_META_IIFTYPE , +NFT_META_IFTYPE , +#define NFT_META_IIFTYPE NFT_META_IFTYPENFT_META_OIFTYPE ,NFT_META_SKUID , NFT_META_SKGID,
@@ -923,6 +970,8 @@ enum nft_meta_keys {NFT_META_TIME_HOUR ,NFT_META_SDIF ,NFT_META_SDIFNAME , +NFT_META_BRI_BROUTE , + __NFT_META_IIFTYPE, };/**
@@ -1213,10 +1262,10 @@ enum nft_last_attributes {/** * enum nft_log_attributes - nf_tables log expression netlink attributes * -* @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U32) +* @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U16) * @NFTA_LOG_PREFIX: prefix to prepend to log messages (NLA_STRING) * @NFTA_LOG_SNAPLEN: length of payload to include in netlink message (NLA_U32) -* @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U32) +* @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U16) * @NFTA_LOG_LEVEL: log level (NLA_U32) * @NFTA_LOG_FLAGS: logging flags (NLA_U32) */
Signature · 1 line
2.39.2
Florian Westphal
maintainerPATCH 2/2 ebtables-nft: add broute table emulation
Use new 'meta broute set 1' to emulate -t broute. If '-t broute' is given, automatically translate -j DROP to 'meta broute set 1 accept' internally.
Reverse translation zaps the broute and pretends verdict was DROP.
Note that BROUTING is internally handled via PREROUTING, i.e. 'redirect' and 'nat' targets are not available, they will need to be emulated via nft expressions.
--- iptables/ebtables-nft.8 | 42 +++++++++++++++++++++++++++-------------- iptables/nft-bridge.c | 36 +++++++++++++++++++++++++++++++++++ iptables/nft-shared.c | 39 +++++++++++++++++++++++++++----------- iptables/nft-shared.h | 3 +++ iptables/nft.c | 13 +++++++++++++ iptables/nft.h | 3 ++- 6 files changed, 110 insertions(+), 26 deletions(-)
iptables/ebtables-nft.8 +28 -14
@@ -55,7 +55,7 @@ It is analogous to the application, but less complicated, due to the fact that the Ethernet protocol is much simpler than the IP protocol. .SS CHAINS -There are two ebtables tables with built-in chains in the +There are three ebtables tables with built-in chains in the Linux kernel. These tables are used to divide functionality into different sets of rules. Each set of rules is called a chain. Each chain is an ordered list of rules that can match Ethernet frames. If a
@@ -81,7 +81,10 @@ an 'extension' (see below) or a jump to a user-defined chain. .B ACCEPT means to let the frame through. .B DROP -means the frame has to be dropped. +means the frame has to be dropped. In the +.BR BROUTING " chain however, the " ACCEPT " and " DROP " target have different" +meanings (see the info provided for the +.BR -t " option)." .B CONTINUE means the next rule has to be checked. This can be handy, f.e., to know how many frames pass a certain point in the chain, to log those frames or to apply multiple
@@ -93,17 +96,13 @@ For the extension targets please refer to the .B "TARGET EXTENSIONS" section of this man page. .SS TABLES -As stated earlier, there are two ebtables tables in the Linux -kernel. The table names are -.BR filter " and " nat . -Of these two tables, +As stated earlier, the table names are +.BR filter ", " nat " and " broute . +Of these tables, the filter table is the default table that the command operates on. -If you are working with the filter table, then you can drop the '-t filter' -argument to the ebtables command. However, you will need to provide -the -t argument for -.B nat -table. Moreover, the -t argument must be the -first argument on the ebtables command line, if used. +If you are working with the a table other than filter, you will need to provide +the -t argument. Moreover, the -t argument must be the +first argument on the ebtables command line, if used. .TP .B "-t, --table" .br
@@ -131,6 +130,23 @@ iptables world to ebtables it is easier to have the same names. Note that you can change the name .BR "" ( -E ) if you don't like the default. +.br +.br +.B broute +is used to make a brouter, it has one built-in chain: +.BR BROUTING . +The targets +.BR DROP " and " ACCEPT +have a special meaning in the broute table (these names are used for +compatibility reasons with ebtables-legacy). +.B DROP +actually means the frame has to be routed, while +.B ACCEPT +means the frame has to be bridged. The +.B BROUTING +chain is traversed very early. +Normally those frames +would be bridged, but you can decide otherwise here. .SH EBTABLES COMMAND LINE ARGUMENTS After the initial ebtables '-t table' command line argument, the remaining arguments can be divided into several groups. These groups
@@ -1059,8 +1075,6 @@ arp message and the hardware address length in the arp header is 6 bytes. .BR "" "See " http://netfilter.org/mailinglists.html .SH BUGS The version of ebtables this man page ships with does not support the -.B broute -table. Also there is no support for .B string match. Further, support for atomic-options .RB ( --atomic-file ", " --atomic-init ", " --atomic-save ", " --atomic-commit )
iptables/nft-bridge.c +36 -0
@@ -95,8 +95,44 @@ static void add_logical_outiface(struct nft_handle *h, struct nftnl_rule *r,add_cmp_ptr (r, op, iface, iface_len +1 , reg); } +static int add_meta_broute (struct nftnl_rule *r) +{ +struct nftnl_expr *expr; + + expr =nftnl_expr_alloc ("immediate" ); +if (expr ==NULL ) +return -1 ; + +nftnl_expr_set_u32 (expr,NFTNL_EXPR_IMM_DREG ,NFT_REG32_01 ); +nftnl_expr_set_u8 (expr,NFTNL_EXPR_IMM_DATA ,1 ); +nftnl_rule_add_expr (r, expr); + + expr =nftnl_expr_alloc ("meta" ); +if (expr ==NULL ) +return -1 ; +nftnl_expr_set_u32 (expr,NFTNL_EXPR_META_KEY ,NFT_META_BRI_BROUTE ); +nftnl_expr_set_u32 (expr,NFTNL_EXPR_META_SREG ,NFT_REG32_01 ); + +nftnl_rule_add_expr (r, expr); +return 0 ; +} +static int _add_action (struct nftnl_rule *r,struct iptables_command_state *cs) { +const char *table =nftnl_rule_get_str (r,NFTNL_RULE_TABLE ); + +if (cs->target && + table &&strcmp (table,"broute" ) ==0 ) { +if (strcmp (cs->jumpto,XTC_LABEL_DROP ) ==0 ) { +int ret =add_meta_broute (r); + +if (ret) +return ret; + + cs->jumpto ="ACCEPT" ; + } + } +return add_action (r, cs, false); }
iptables/nft-shared.c +28 -11
@@ -511,8 +511,24 @@ void get_cmp_data(struct nftnl_expr *e, void *data, size_t dlen, bool *inv) *inv = (op ==NFT_CMP_NEQ ); } -static void nft_meta_set_to_target (struct nft_xt_ctx *ctx, -struct nftnl_expr *e) +static bool nft_parse_meta_set_common (struct nft_xt_ctx * ctx, +struct nft_xt_ctx_reg *sreg) +{ +if ((sreg->type !=NFT_XT_REG_IMMEDIATE )) { + ctx->errmsg ="meta sreg is not an immediate" ; +return false; + } + +if (sreg->immediate.data[0 ] ==0 ) { + ctx->errmsg ="meta sreg immediate is 0" ; +return false; + } + +return true; +} + +static void nft_parse_meta_set (struct nft_xt_ctx *ctx, +struct nftnl_expr *e) {struct xtables_target *target;struct nft_xt_ctx_reg *sreg;
@@ -528,18 +544,17 @@ static void nft_meta_set_to_target(struct nft_xt_ctx *ctx,switch (nftnl_expr_get_u32 (e,NFTNL_EXPR_META_KEY )) {case NFT_META_NFTRACE : -if ((sreg->type !=NFT_XT_REG_IMMEDIATE )) { - ctx->errmsg ="meta nftrace but reg not immediate" ; +if (!nft_parse_meta_set_common (ctx, sreg))return ; - } - -if (sreg->immediate.data[0 ] ==0 ) { - ctx->errmsg ="trace is cleared" ; -return ; - } targname ="TRACE" ;break ; +case NFT_META_BRI_BROUTE : +if (!nft_parse_meta_set_common (ctx, sreg)) +return ; + + ctx->cs->jumpto ="DROP" ; +return ;default : ctx->errmsg ="meta sreg key not supported" ;return ;
@@ -568,7 +583,7 @@ static void nft_parse_meta(struct nft_xt_ctx *ctx, struct nftnl_expr *e)struct nft_xt_ctx_reg *reg;if (nftnl_expr_is_set (e,NFTNL_EXPR_META_SREG )) { -nft_meta_set_to_target (ctx, e); +nft_parse_meta_set (ctx, e);return ; }
@@ -1145,6 +1160,8 @@ static void nft_parse_immediate(struct nft_xt_ctx *ctx, struct nftnl_expr *e)/* Standard target? */ switch (verdict) {case NF_ACCEPT : +if (cs->jumpto &&strcmp (ctx->table,"broute" ) ==0 ) +break ; cs->jumpto ="ACCEPT" ;break ;case NF_DROP :
iptables/nft-shared.h +3 -0
@@ -61,6 +61,9 @@ struct nft_xt_ctx_reg {struct {uint32_t key; } meta_dreg; +struct { +uint32_t key; + } meta_sreg; };struct {
iptables/nft.c +13 -0
@@ -643,6 +643,19 @@ static const struct builtin_table xtables_bridge[NFT_TABLE_MAX] = { }, }, }, + [NFT_TABLE_BROUTE ] = { + .name ="broute" , + .type =NFT_TABLE_BROUTE , + .chains = { + { + .name ="BROUTING" , + .type ="filter" , + .prio =NF_BR_PRI_FIRST , + .hook =NF_BR_PRE_ROUTING , + }, + }, + }, + }; static int nft_table_builtin_add(struct nft_handle *h,
iptables/nft.h +2 -1
@@ -14,8 +14,9 @@ enum nft_table_type { NFT_TABLE_RAW,NFT_TABLE_FILTER ,NFT_TABLE_NAT , + NFT_TABLE_BROUTE, }; -#define NFT_TABLE_MAX (NFT_TABLE_NAT + 1) +#define NFT_TABLE_MAX (NFT_TABLE_BROUTE + 1)struct builtin_chain {const char *name;
Signature · 1 line
2.39.2
RE: [PATCH iptables 2/2] ebtables-nft: add broute table emulation
Quoted 8 lines
-----Original Message-----
From: Florian Westphal <[email protected]>
Sent: Tuesday, 4 April 2023 11:46
To: [email protected]
Cc: Florian Westphal <[email protected]>
Subject: [PATCH iptables 2/2] ebtables-nft: add broute table emulation
Quoted 8 lines
Use new 'meta broute set 1' to emulate -t broute. If '-t broute' is given, automatically translate -j DROP to 'meta broute set 1 accept' internally.
Reverse translation zaps the broute and pretends verdict was DROP.
Note that BROUTING is internally handled via PREROUTING, i.e. 'redirect' and 'nat' targets are not available, they will need to be emulated via nft expressions.
Thank you so much for fixing this, I attempted to update ebtables-nft for broute support but couldn’t understand all the details. Does this close https://bugzilla.netfilter.org/show_bug.cgi?id=1316?
Quoted 265 lines
Signed-off-by Florian Westphal <[email protected]>--- iptables/ebtables-nft.8 | 42 +++++++++++++++++++++++++++-------------- iptables/nft-bridge.c | 36 +++++++++++++++++++++++++++++++++++ iptables/nft-shared.c | 39 +++++++++++++++++++++++++++----------- iptables/nft-shared.h | 3 +++ iptables/nft.c | 13 +++++++++++++ iptables/nft.h | 3 ++- 6 files changed, 110 insertions(+), 26 deletions(-)iptables/ebtables-nft.8 index renamed from iptables/ebtables-nft.8 +0
-0
d75aae240bc0..d639bdf5e292100644iptables/ebtables-nft.8 +0
-0@@ -55,7 +55,7 @@ It is analogous to the application, but less complicated,due to the fact that the Ethernet protocol is much simpler than the IP protocol.
.SS CHAINSiptables/ebtables-nft.8 +1
-1-There are two ebtables tables with built-in chains in the +There are three ebtables tables with built-in chains in the Linux kernel. These tables are used to divide functionality into different sets ofrules. Each set of rules is called a chain.
Each chain is an ordered list of rules that can match Ethernet frames. If a @@ -
81,7 +81,10 @@ an 'extension' (see below) or a jump to a user-defined chain.
.B ACCEPT
means to let the frame through.
.B DROPiptables/ebtables-nft.8 +3
-1-means the frame has to be dropped. +means the frame has to be dropped. In the .BR BROUTING " chain however, +the " ACCEPT " and " DROP " target have different" +meanings (see the info provided for the .BR -t " option)." .B CONTINUE means the next rule has to be checked. This can be handy, f.e., to know howmany frames pass a certain point in the chain, to log those frames or to apply multiple @@ -93,17 +96,13 @@ For the extension targets please refer to the .B "TARGET EXTENSIONS"
section of this man page.
.SS TABLES
-As stated earlier, there are two ebtables tables in the Linux -kernel. The table names are -.BR filter " and " nat .iptables/ebtables-nft.8 +3
-3-Of these two tables, +As stated earlier, the table names are +.BR filter ", " nat " and " broute . +Of these tables, the filter table is the default table that the command operates on. -If you are working with the filter table, then you can drop the '-t filter' -argument to the ebtables command. However, you will need to provide -the -targument for -.B nat -table. Moreover, the -t argument must be the -first argument on the ebtables command line, if used.
iptables/ebtables-nft.8 +3
-0+If you are working with the a table other than filter, you will need to +provide the -t argument. Moreover, the -t argument must be the first +argument on the ebtables command line, if used. .TP .B "-t, --table" .br@@ -131,6 +130,23 @@ iptables world to ebtables it is easier to have thesame names. Note that you can change the name .BR "" ( -E ) if you don't like the default.
+.br
+.br
+.B brouteiptables/ebtables-nft.8 +11
-0+is used to make a brouter, it has one built-in chain: +.BR BROUTING . +The targets +.BR DROP " and " ACCEPT +have a special meaning in the broute table (these names are used for +compatibility reasons with ebtables-legacy). +.B DROP +actually means the frame has to be routed, while .B ACCEPT means the +frame has to be bridged. The .B BROUTING chain is traversed very early. +Normally those frames +would be bridged, but you can decide otherwise here. .SH EBTABLES COMMAND LINE ARGUMENTS After the initial ebtables '-t table' command line argument, the remainingarguments can be divided into several groups. These groups @@ -1059,8 +1075,6 @@ arp message and the hardware address length in the arp header is 6 bytes.
.BR "" "See " http://netfilter.org/mailinglists.html
.SH BUGS
The version of ebtables this man page ships with does not support the -.B
broute -table. Also there is no support for .B string match. Further, support for atomic-options .RB ( --atomic-file ", " --atomic-init ", " --atomic-save ", " -- atomic-commit ) diff --gita/iptables/nft-bridge.cb/iptables/nft-bridge.cindexb9983b203f6d..22860d6b91a6100644iptables/nft-bridge.c +35
-0@@ -95,8 +95,44 @@ static void add_logical_outiface(struct nft_handle *h,struct nftnl_rule *r, add_cmp_ptr(r, op, iface, iface_len + 1, reg); } +static int add_meta_broute (struct nftnl_rule *r) { +struct nftnl_expr *expr; + + expr =nftnl_expr_alloc ("immediate" ); +if (expr ==NULL ) +return -1 ; + +nftnl_expr_set_u32 (expr,NFTNL_EXPR_IMM_DREG ,NFT_REG32_01 ); +nftnl_expr_set_u8 (expr,NFTNL_EXPR_IMM_DATA ,1 ); +nftnl_rule_add_expr (r, expr); + + expr =nftnl_expr_alloc ("meta" ); +if (expr ==NULL ) +return -1 ; +nftnl_expr_set_u32 (expr,NFTNL_EXPR_META_KEY ,NFT_META_BRI_BROUTE ); +nftnl_expr_set_u32 (expr,NFTNL_EXPR_META_SREG ,NFT_REG32_01 ); + +nftnl_rule_add_expr (r, expr); +return 0 ; +} +static int _add_action (struct nftnl_rule *r,struct iptables_command_state *cs) { +const char *table =nftnl_rule_get_str (r,NFTNL_RULE_TABLE ); + +if (cs->target && + table &&strcmp (table,"broute" ) ==0 ) { +if (strcmp (cs->jumpto,XTC_LABEL_DROP ) ==0 ) { +int ret =add_meta_broute (r); + +if (ret) +return ret; + + cs->jumpto ="ACCEPT" ; + } + } +return add_action (r, cs, false); }iptables/nft-shared.c index renamed from iptables/nft-shared.c +0
-0
1b22eb7afd30..c19d78e46972100644iptables/nft-shared.c +18
-2@@ -511,8 +511,24 @@ void get_cmp_data(struct nftnl_expr *e, void *data, size_t dlen, bool *inv) *inv = (op ==NFT_CMP_NEQ ); } -static void nft_meta_set_to_target (struct nft_xt_ctx *ctx, -struct nftnl_expr *e) +static bool nft_parse_meta_set_common (struct nft_xt_ctx * ctx, +struct nft_xt_ctx_reg *sreg) +{ +if ((sreg->type !=NFT_XT_REG_IMMEDIATE )) { + ctx->errmsg ="meta sreg is not an immediate" ; +return false; + } + +if (sreg->immediate.data[0 ] ==0 ) { + ctx->errmsg ="meta sreg immediate is 0" ; +return false; + } + +return true; +} + +static void nft_parse_meta_set (struct nft_xt_ctx *ctx, +struct nftnl_expr *e) {struct xtables_target *target;iptables/nft-shared.c +7
-8struct nft_xt_ctx_reg *sreg;@@ -528,18 +544,17 @@ static void nft_meta_set_to_target(struct nft_xt_ctx *ctx, switch (nftnl_expr_get_u32(e, NFTNL_EXPR_META_KEY)) {case NFT_META_NFTRACE : -if ((sreg->type !=NFT_XT_REG_IMMEDIATE )) { - ctx->errmsg ="meta nftrace but reg not immediate" ; +if (!nft_parse_meta_set_common (ctx, sreg))return ; - } - -if (sreg->immediate.data[0 ] ==0 ) { - ctx->errmsg ="trace is cleared" ; -return ; - } targname ="TRACE" ;break ; +case NFT_META_BRI_BROUTE : +if (!nft_parse_meta_set_common (ctx, sreg)) +return ; + + ctx->cs->jumpto ="DROP" ; +return ;default : ctx->errmsg ="meta sreg key not supported" ;iptables/nft-shared.c +3
-1return ;@@ -568,7 +583,7 @@ static void nft_parse_meta(struct nft_xt_ctx *ctx, struct nftnl_expr *e)struct nft_xt_ctx_reg *reg;if (nftnl_expr_is_set (e,NFTNL_EXPR_META_SREG )) { -nft_meta_set_to_target (ctx, e); +nft_parse_meta_set (ctx, e);return ; }@@ -1145,6 +1160,8 @@ static void nft_parse_immediate(struct nft_xt_ctx *ctx, struct nftnl_expr *e)/* Standard target? */ switch (verdict) {case NF_ACCEPT : +if (cs->jumpto &&strcmp (ctx->table,"broute" ) ==0 ) +break ; cs->jumpto ="ACCEPT" ;break ;iptables/nft-shared.c +0
-0case NF_DROP :iptables/nft-shared.h index renamed from iptables/nft-shared.h +0
-0
b8bc1a6ce2e9..2c4c0d90cd07100644iptables/nft-shared.h +3
-0@@ -61,6 +61,9 @@ struct nft_xt_ctx_reg {struct {uint32_t key; } meta_dreg; +struct { +uint32_t key; + } meta_sreg; };struct {iptables/nft.c index 5ef5335a24c1..1cb104e75ccc renamed from iptables/nft.c +0
-0100644
iptables/nft.c +13
-0@@ -643,6 +643,19 @@ static const struct builtin_table xtables_bridge[NFT_TABLE_MAX] = { }, }, }, + [NFT_TABLE_BROUTE ] = { + .name ="broute" , + .type =NFT_TABLE_BROUTE , + .chains = { + { + .name ="BROUTING" , + .type ="filter" , + .prio =NF_BR_PRI_FIRST , + .hook =NF_BR_PRE_ROUTING , + }, + }, + }, + };static int nft_table_builtin_add(struct
nft_handle*h, diff --gita/iptables/nft.hb/iptables/nft.hindex56005863ed4c..1d18982dc8cf100644iptables/nft.h +2
-2@@ -14,8 +14,9 @@ enum nft_table_type { NFT_TABLE_RAW,NFT_TABLE_FILTER ,NFT_TABLE_NAT , + NFT_TABLE_BROUTE, }; -#define NFT_TABLE_MAX (NFT_TABLE_NAT + 1) +#define NFT_TABLE_MAX (NFT_TABLE_BROUTE + 1)struct builtin_chain {const char *name; --2.39.2
Florian Westphal
maintainerRe: [PATCH iptables 2/2] ebtables-nft: add broute table emulation
Quoted 2 lines · Sriram Yagnaraman
Thank you so much for fixing this, I attempted to update ebtables-nft for broute support but couldn’t understand all the details. Does this close https://bugzilla.netfilter.org/show_bug.cgi?id=1316?
Yes, simple -t broute -DROP will work with this patch.
Phil Sutter
reviewerRe: [PATCH iptables 2/2] ebtables-nft: add broute table emulation
In reply to Florian WestphalOn Tue, Apr 04, 2023 at 11:45:44AM +0200, Florian Westphal wrote:
[...]
Quoted 2 lines
iptables/ebtables-nft.8 +0
-0
[...]
Quoted 9 lines
iptables/ebtables-nft.8 +1
-4@@ -93,17 +96,13 @@ For the extension targets please refer to the .B "TARGET EXTENSIONS" section of this man page. .SS TABLES -As stated earlier, there are two ebtables tables in the Linux -kernel. The table names are -.BR filter " and " nat . -Of these two tables, +As stated earlier, the table names are
iptables/ebtables-nft.8 For the extension targets please refer to the · line 103
Quoted 10 lines
iptables/ebtables-nft.8 +3
-6+.BR filter ", " nat " and " broute . +Of these tables, the filter table is the default table that the command operates on. -If you are working with the filter table, then you can drop the '-t filter' -argument to the ebtables command. However, you will need to provide -the -t argument for -.B nat -table. Moreover, the -t argument must be the -first argument on the ebtables command line, if used. +If you are working with the a table other than filter, you will need to provide
Typo here ("the a" -> "a").
Also this patch broke iptables/tests/shell/testcases/ebtables/0001-ebtables-basic_0 ("broute" table name did not fail anymore, so nothing serious).
Folded both fixes into this commit, then applied the series.
Thanks for working on it!