band: fix HT40+/- checks when creating chandef
PATCH 1/1 band: fix HT40+/- checks when creating chandef
The HT40+/- flags were reversed when checking against the 802.11 behavior flags.
HT40+ means the secondary channel is above (+) the primary channel therefore corresponds to the PRIMARY_CHANNEL_LOWER behavior. And the opposite for HT40-.
Reported-By Alagu Sankar <[email protected]>
--- src/band.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
src/band.c +2 -2
@@ -1229,11 +1229,11 @@ int band_freq_to_ht_chandef(uint32_t freq, const struct band_freq_attrs *attr,if (band ==BAND_FREQ_6_GHZ )break ; -if (info->flags &PRIMARY_CHANNEL_UPPER && +if (info->flags &PRIMARY_CHANNEL_LOWER && attr->no_ht40_plus)continue ; -if (info->flags &PRIMARY_CHANNEL_LOWER && +if (info->flags &PRIMARY_CHANNEL_UPPER && attr->no_ht40_minus)continue ;
Signature · 1 line
2.25.1
Denis Kenzior
AppliedHi James,
Quoted 12 lines · James Prestwood
The HT40+/- flags were reversed when checking against the 802.11 behavior flags.
HT40+ means the secondary channel is above (+) the primary channel therefore corresponds to the
PRIMARY_CHANNEL_LOWERbehavior. And the opposite for HT40-.Reported-By Alagu Sankar <[email protected]>--- src/band.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Applied, thanks.
Regards,
-Denis