Skip to contentSkip to conversation

powerpc/fsl_uli1575: Cleanups

PATCH Superseded Pali Rohár 2 participants 10 messages Apr 8, 2023

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#3 lore raw

PATCH v2 3/8 powerpc/fsl_uli1575: Simplify uli_exclude_device() usage

In reply to Pali Rohár

Function uli_exclude_device() is called only from mpc86xx_exclude_device() and mpc85xx_exclude_device() functions. Both those functions are same, so merge its logic directly into the uli_exclude_device() function.

---
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   | 13 +------------
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 13 +------------
 arch/powerpc/platforms/fsl_uli1575.c       |  4 +++-
 3 files changed, 5 insertions(+), 25 deletions(-)
arch/powerpc/platforms/85xx/mpc85xx_ds.c +1 -12
index 0c905a838942..581b5f0ef3be 100644
@@ -107,17 +107,6 @@ void __init mpc85xx_ds_pic_init(void)
 #endif	/* CONFIG_PPC_I8259 */
 }
 
-#ifdef CONFIG_PCI
-static int mpc85xx_exclude_device(struct pci_controller *hose,
-				   u_char bus, u_char devfn)
-{
-	if (hose->dn == fsl_pci_primary)
-		return uli_exclude_device(hose, bus, devfn);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-#endif	/* CONFIG_PCI */
-
 static void __init mpc85xx_ds_uli_init(void)
 {
 #ifdef CONFIG_PCI
@@ -132,7 +121,7 @@ static void __init mpc85xx_ds_uli_init(void)
 		node = pci_with_uli;
 
 		if (pci_with_uli == fsl_pci_primary) {
-			ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+			ppc_md.pci_exclude_device = uli_exclude_device;
 			break;
 		}
 	}
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +1 -12
index 3dbd396a0df5..645125cc8420 100644
@@ -39,17 +39,6 @@
 #define DBG(fmt...) do { } while(0)
 #endif
 
-#ifdef CONFIG_PCI
-static int mpc86xx_exclude_device(struct pci_controller *hose,
-				   u_char bus, u_char devfn)
-{
-	if (hose->dn == fsl_pci_primary)
-		return uli_exclude_device(hose, bus, devfn);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-#endif /* CONFIG_PCI */
-
 
 static void __init
 mpc86xx_hpcn_setup_arch(void)
@@ -58,7 +47,7 @@ mpc86xx_hpcn_setup_arch(void)
 		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
 
 #ifdef CONFIG_PCI
-	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
+	ppc_md.pci_exclude_device = uli_exclude_device;
 #endif
 
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
arch/powerpc/platforms/fsl_uli1575.c +3 -1
index a32f9cef7845..1350db0b935d 100644
@@ -15,6 +15,8 @@
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>
 
+#include <sysdev/fsl_pci.h>
+
 #define ULI_PIRQA	0x08
 #define ULI_PIRQB	0x09
 #define ULI_PIRQC	0x0a
@@ -344,7 +346,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
 
 int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 {
-	if (bus == (hose->first_busno + 2)) {
+	if (hose->dn == fsl_pci_primary && bus == (hose->first_busno + 2)) {
 		/* exclude Modem controller */
 		if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 1))
 			return PCIBIOS_DEVICE_NOT_FOUND;
Signature · 1 line
2.20.1
#0 lore raw

v2 cover powerpc/fsl_uli1575: Cleanups

This patch series contains cleanups for fsl_uli1575 driver.

This patch series is prerequisity for another patch series:
"powerpc/85xx: p2020: Create one unified machine description"
https://lore.kernel.org/linuxppc-dev/[email protected]/t/#u

Changes in v2:
* Fixed compile error in the first patch when PCI is disabled

Christophe Leroy (1):
powerpc/fsl_uli1575: Misc cleanup

Pali Rohár (7):
powerpc/85xx: mpc85xx_ds: Simplify mpc85xx_exclude_device() function powerpc/fsl_uli1575: Simplify uli_exclude_device() usage powerpc/85xx: mpc85xx_ds: Move uli_init() code into its own driver
file
powerpc/mpc85xx: mpc85xx_rdb: Do not automatically select FSL_ULI1575 powerpc/fsl_uli1575: Allow to disable FSL_ULI1575 support powerpc/mpc86xx: mpc86xx_hpcn: Call uli_init() instead of explicit
ppc_md assignment
powerpc/fsl_uli1575: Mark uli_exclude_device() as static

 arch/powerpc/include/asm/ppc-pci.h         |  8 +++++
 arch/powerpc/platforms/85xx/Kconfig        |  1 -
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   | 39 ++--------------------
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 20 ++---------
 arch/powerpc/platforms/Kconfig             |  2 +-
 arch/powerpc/platforms/fsl_uli1575.c       | 29 +++++++++++++---
 6 files changed, 38 insertions(+), 61 deletions(-)
Signature · 1 line
2.20.1
#2 lore raw

PATCH v2 2/8 powerpc/85xx: mpc85xx_ds: Simplify mpc85xx_exclude_device() function

Function mpc85xx_exclude_device() is installed and used only when pci_with_uli is fsl_pci_primary. So replace check for pci_with_uli by fsl_pci_primary in mpc85xx_exclude_device() and move pci_with_uli variable declaration into function mpc85xx_ds_uli_init() where it is used.

---
 arch/powerpc/platforms/85xx/mpc85xx_ds.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
arch/powerpc/platforms/85xx/mpc85xx_ds.c +2 -3
index ed7b71d55b10..0c905a838942 100644
@@ -108,12 +108,10 @@ void __init mpc85xx_ds_pic_init(void)
 }
 
 #ifdef CONFIG_PCI
-static struct device_node *pci_with_uli;
-
 static int mpc85xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
 {
-	if (hose->dn == pci_with_uli)
+	if (hose->dn == fsl_pci_primary)
 		return uli_exclude_device(hose, bus, devfn);
 
 	return PCIBIOS_SUCCESSFUL;
@@ -124,6 +122,7 @@ static void __init mpc85xx_ds_uli_init(void)
 {
 #ifdef CONFIG_PCI
 	struct device_node *node;
+	struct device_node *pci_with_uli;
 
 	/* See if we have a ULI under the primary */
 
Signature · 1 line
2.20.1
#4 lore raw

PATCH v2 4/8 powerpc/85xx: mpc85xx_ds: Move uli_init() code into its own driver file

In reply to Pali Rohár

Move uli_init() function into existing driver fsl_uli1575.c file in order to share its code between more platforms and board files.

---
 arch/powerpc/include/asm/ppc-pci.h       |  2 ++
 arch/powerpc/platforms/85xx/mpc85xx_ds.c | 23 +----------------------
 arch/powerpc/platforms/fsl_uli1575.c     | 19 +++++++++++++++++++
 3 files changed, 22 insertions(+), 22 deletions(-)
arch/powerpc/include/asm/ppc-pci.h +2 -0
index a8db969dd595..0e393aeed912 100644
@@ -59,6 +59,7 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev);
 
 #ifdef CONFIG_FSL_ULI1575
 int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn);
+void __init uli_init(void);
 #endif /* CONFIG_FSL_ULI1575 */
 
 #define PCI_BUSNO(bdfn) ((bdfn >> 8) & 0xff)
@@ -70,6 +71,7 @@ static inline void init_pci_config_tokens(void) { }
 #if !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575)
 #include <linux/pci.h>
 static inline int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { return PCIBIOS_SUCCESSFUL; }
+static inline void __init uli_init(void) {}
 #endif /* !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575) */
 
 #endif /* __KERNEL__ */
arch/powerpc/platforms/85xx/mpc85xx_ds.c +1 -22
index 581b5f0ef3be..c474da3eeea8 100644
@@ -107,27 +107,6 @@ void __init mpc85xx_ds_pic_init(void)
 #endif	/* CONFIG_PPC_I8259 */
 }
 
-static void __init mpc85xx_ds_uli_init(void)
-{
-#ifdef CONFIG_PCI
-	struct device_node *node;
-	struct device_node *pci_with_uli;
-
-	/* See if we have a ULI under the primary */
-
-	node = of_find_node_by_name(NULL, "uli1575");
-	while ((pci_with_uli = of_get_parent(node))) {
-		of_node_put(node);
-		node = pci_with_uli;
-
-		if (pci_with_uli == fsl_pci_primary) {
-			ppc_md.pci_exclude_device = uli_exclude_device;
-			break;
-		}
-	}
-#endif
-}
-
 /*
  * Setup the architecture
  */
@@ -138,7 +117,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 
 	swiotlb_detect_4g();
 	fsl_pci_assign_primary();
-	mpc85xx_ds_uli_init();
+	uli_init();
 	mpc85xx_smp_init();
 
 	printk("MPC85xx DS board from Freescale Semiconductor\n");
arch/powerpc/platforms/fsl_uli1575.c +19 -0
index 1350db0b935d..b073db9d7c79 100644
@@ -358,3 +358,22 @@ int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 
 	return PCIBIOS_SUCCESSFUL;
 }
+
+void __init uli_init(void)
+{
+	struct device_node *node;
+	struct device_node *pci_with_uli;
+
+	/* See if we have a ULI under the primary */
+
+	node = of_find_node_by_name(NULL, "uli1575");
+	while ((pci_with_uli = of_get_parent(node))) {
+		of_node_put(node);
+		node = pci_with_uli;
+
+		if (pci_with_uli == fsl_pci_primary) {
+			ppc_md.pci_exclude_device = uli_exclude_device;
+			break;
+		}
+	}
+}
Signature · 1 line
2.20.1
#6 lore raw

PATCH v2 6/8 powerpc/fsl_uli1575: Allow to disable FSL_ULI1575 support

In reply to Pali Rohár

ULI1575 PCIe south bridge exists only on some Freescale boards. Allow to disable CONFIG_FSL_ULI1575 symbol when it is not explicitly selected and only implied.

---
 arch/powerpc/platforms/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/platforms/Kconfig +1 -1
index d41dad227de8..d4b43dade51e 100644
@@ -261,7 +261,7 @@ config CPM2
 	  on it (826x, 827x, 8560).
 
 config FSL_ULI1575
-	bool
+	bool "ULI1575 PCIe south bridge support"
 	select GENERIC_ISA_DMA
 	help
 	  Supports for the ULI1575 PCIe south bridge that exists on some
Signature · 1 line
2.20.1
#1 lore raw

PATCH v2 1/8 powerpc/fsl_uli1575: Misc cleanup

In reply to Pali Rohár

From: Christophe Leroy <[email protected]>

Use a single line for uli_exclude_device().

Add uli_exclude_device() prototype in ppc-pci.h and guard it.

Remove that prototype from mpc85xx_ds.c and mpc86xx_hpcn.c files.

Make uli_pirq_to_irq[] static as it is used only in that file.

---
 arch/powerpc/include/asm/ppc-pci.h         | 9 +++++++++
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   | 4 +---
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 4 +---
 arch/powerpc/platforms/fsl_uli1575.c       | 6 +++---
 4 files changed, 14 insertions(+), 9 deletions(-)
arch/powerpc/include/asm/ppc-pci.h +9 -0
index f6cf0159024e..a8db969dd595 100644
@@ -57,11 +57,20 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev);
 
 #endif /* CONFIG_EEH */
 
+#ifdef CONFIG_FSL_ULI1575
+int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn);
+#endif /* CONFIG_FSL_ULI1575 */
+
 #define PCI_BUSNO(bdfn) ((bdfn >> 8) & 0xff)
 
 #else /* CONFIG_PCI */
 static inline void init_pci_config_tokens(void) { }
 #endif /* !CONFIG_PCI */
 
+#if !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575)
+#include <linux/pci.h>
+static inline int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { return PCIBIOS_SUCCESSFUL; }
+#endif /* !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575) */
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_PPC_PCI_H */
arch/powerpc/platforms/85xx/mpc85xx_ds.c +1 -3
index 70167b8f00a3..ed7b71d55b10 100644
@@ -26,6 +26,7 @@
 #include <asm/mpic.h>
 #include <asm/i8259.h>
 #include <asm/swiotlb.h>
+#include <asm/ppc-pci.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
@@ -107,9 +108,6 @@ void __init mpc85xx_ds_pic_init(void)
 }
 
 #ifdef CONFIG_PCI
-extern int uli_exclude_device(struct pci_controller *hose,
-				u_char bus, u_char devfn);
-
 static struct device_node *pci_with_uli;
 
 static int mpc85xx_exclude_device(struct pci_controller *hose,
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +1 -3
index 7b00ebd2d7f8..3dbd396a0df5 100644
@@ -22,6 +22,7 @@
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
 #include <asm/swiotlb.h>
+#include <asm/ppc-pci.h>
 
 #include <asm/mpic.h>
 
@@ -39,9 +40,6 @@
 #endif
 
 #ifdef CONFIG_PCI
-extern int uli_exclude_device(struct pci_controller *hose,
-				u_char bus, u_char devfn);
-
 static int mpc86xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
 {
arch/powerpc/platforms/fsl_uli1575.c +3 -3
index 84afae7a2561..a32f9cef7845 100644
@@ -13,6 +13,7 @@
 #include <linux/of_irq.h>
 
 #include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
 
 #define ULI_PIRQA	0x08
 #define ULI_PIRQB	0x09
@@ -36,7 +37,7 @@
 #define ULI_8259_IRQ14	0x0d
 #define ULI_8259_IRQ15	0x0f
 
-u8 uli_pirq_to_irq[8] = {
+static u8 uli_pirq_to_irq[8] = {
 	ULI_8259_IRQ9,		/* PIRQA */
 	ULI_8259_IRQ10,		/* PIRQB */
 	ULI_8259_IRQ11,		/* PIRQC */
@@ -341,8 +342,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
 
-int uli_exclude_device(struct pci_controller *hose,
-			u_char bus, u_char devfn)
+int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 {
 	if (bus == (hose->first_busno + 2)) {
 		/* exclude Modem controller */
Signature · 1 line
2.20.1
#5 lore raw

PATCH v2 5/8 powerpc/mpc85xx: mpc85xx_rdb: Do not automatically select FSL_ULI1575

In reply to Pali Rohár

Boards provided by CONFIG_MPC85xx_RDB option do not initialize fsl_uli1575.c driver. So remove explicit select dependency on it.

---
 arch/powerpc/platforms/85xx/Kconfig | 1 -
 1 file changed, 1 deletion(-)
arch/powerpc/platforms/85xx/Kconfig +0 -1
index b92cb2b4d54d..a8ce6616fd0a 100644
@@ -90,7 +90,6 @@ config MPC85xx_RDB
 	bool "Freescale P102x MBG/UTM/RDB and P2020 RDB"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
-	select FSL_ULI1575 if PCI
 	select SWIOTLB
 	help
 	  This option enables support for the P1020 MBG PC, P1020 UTM PC,
Signature · 1 line
2.20.1
#8 lore raw

PATCH v2 7/8 powerpc/mpc86xx: mpc86xx_hpcn: Call uli_init() instead of explicit ppc_md assignment

In reply to Pali Rohár

After calling fsl_pci_assign_primary(), it is possible to use uli_init() to conditionally initialize ppc_md.pci_exclude_device callback based on the uli1575 detection.

---
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +1 -4
index 645125cc8420..812110673d88 100644
@@ -46,10 +46,6 @@ mpc86xx_hpcn_setup_arch(void)
 	if (ppc_md.progress)
 		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	ppc_md.pci_exclude_device = uli_exclude_device;
-#endif
-
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
 
 #ifdef CONFIG_SMP
@@ -57,6 +53,7 @@ mpc86xx_hpcn_setup_arch(void)
 #endif
 
 	fsl_pci_assign_primary();
+	uli_init();
 
 	swiotlb_detect_4g();
 }
Signature · 1 line
2.20.1
#9 lore raw

PATCH v2 8/8 powerpc/fsl_uli1575: Mark uli_exclude_device() as static

In reply to Pali Rohár

Function uli_exclude_device() is not used outside of the fsl_uli1575.c source file anymore. So mark it as static and remove public prototype.

---
 arch/powerpc/include/asm/ppc-pci.h   | 3 ---
 arch/powerpc/platforms/fsl_uli1575.c | 2 +-
 2 files changed, 1 insertion(+), 4 deletions(-)
arch/powerpc/include/asm/ppc-pci.h +0 -3
index 0e393aeed912..d9fcff575027 100644
@@ -58,7 +58,6 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev);
 #endif /* CONFIG_EEH */
 
 #ifdef CONFIG_FSL_ULI1575
-int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn);
 void __init uli_init(void);
 #endif /* CONFIG_FSL_ULI1575 */
 
@@ -69,8 +68,6 @@ static inline void init_pci_config_tokens(void) { }
 #endif /* !CONFIG_PCI */
 
 #if !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575)
-#include <linux/pci.h>
-static inline int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { return PCIBIOS_SUCCESSFUL; }
 static inline void __init uli_init(void) {}
 #endif /* !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575) */
 
arch/powerpc/platforms/fsl_uli1575.c +1 -1
index b073db9d7c79..b8d37a9932f1 100644
@@ -344,7 +344,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
 
-int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
+static int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 {
 	if (hose->dn == fsl_pci_primary && bus == (hose->first_busno + 2)) {
 		/* exclude Modem controller */
Signature · 1 line
2.20.1
#7 lore raw

Re: [PATCH v2 6/8] powerpc/fsl_uli1575: Allow to disable FSL_ULI1575 support

In reply to Pali Rohár
kernel test robot noticed the following build errors:

Hi Pali,

kernel test robot noticed the following build errors:

[auto build test ERROR on powerpc/next]
[also build test ERROR on powerpc/fixes linus/master v6.3-rc5 next-20230406] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Pali-Roh-r/powerpc-fsl_uli1575-Misc-cleanup/20230408-235055
base:   https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git next
patch link:    https://lore.kernel.org/r/20230408154814.10400-7-pali%40kernel.org
patch subject: [PATCH v2 6/8] powerpc/fsl_uli1575: Allow to disable FSL_ULI1575 support
config: powerpc-allmodconfig (https://download.01.org/0day-ci/archive/20230409/[email protected]/config)
compiler: powerpc-linux-gcc (GCC) 12.1.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/c6f089a50f49ce965f0f8ee3a2ab0126cb519366
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Pali-Roh-r/powerpc-fsl_uli1575-Misc-cleanup/20230408-235055 git checkout c6f089a50f49ce965f0f8ee3a2ab0126cb519366
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=powerpc olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=powerpc SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <[email protected]>
| Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

powerpc-linux-ld: arch/powerpc/platforms/fsl_uli1575.o: in function `uli_exclude_device':

>> fsl_uli1575.c:(.text+0x36): undefined reference to `fsl_pci_primary'
>> powerpc-linux-ld: fsl_uli1575.c:(.text+0x3e): undefined reference to `fsl_pci_primary'
   powerpc-linux-ld: arch/powerpc/platforms/fsl_uli1575.o: in function `uli_init':
>> fsl_uli1575.c:(.init.text+0x1e): undefined reference to `fsl_pci_primary'
>> powerpc-linux-ld: fsl_uli1575.c:(.init.text+0x7e): undefined reference to `fsl_pci_primary'
Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests