Skip to contentSkip to conversation

powerpc/fsl_uli1575: Cleanups

PATCH Applied Pali Rohár 2 participants 10 messages Apr 9, 2023 – Apr 26, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover powerpc/fsl_uli1575: Cleanups

This patch series contains cleanups for fsl_uli1575 driver.

This patch series is prerequisite for another patch series:
"powerpc/85xx: p2020: Create one unified machine description"
https://lore.kernel.org/linuxppc-dev/[email protected]/t/#u

Changes in v3:
* Fixed compile error in the sixth patch when driver was explicitly enabled on unsupported platform

Changes in v2:
* Fixed compile error in the first patch when PCI is disabled

Christophe Leroy (1):
powerpc/fsl_uli1575: Misc cleanup

Pali Rohár (7):
powerpc/85xx: mpc85xx_ds: Simplify mpc85xx_exclude_device() function powerpc/fsl_uli1575: Simplify uli_exclude_device() usage powerpc/85xx: mpc85xx_ds: Move uli_init() code into its own driver
file
powerpc/85xx: mpc85xx_rdb: Do not automatically select FSL_ULI1575 powerpc/fsl_uli1575: Allow to disable FSL_ULI1575 support powerpc/86xx: mpc86xx_hpcn: Call uli_init() instead of explicit
ppc_md assignment
powerpc/fsl_uli1575: Mark uli_exclude_device() as static

 arch/powerpc/include/asm/ppc-pci.h         |  8 +++++
 arch/powerpc/platforms/85xx/Kconfig        |  1 -
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   | 39 ++--------------------
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 20 ++---------
 arch/powerpc/platforms/Kconfig             |  4 ++-
 arch/powerpc/platforms/fsl_uli1575.c       | 29 +++++++++++++---
 6 files changed, 40 insertions(+), 61 deletions(-)
Signature · 1 line
2.20.1
#1 lore raw

PATCH v3 1/8 powerpc/fsl_uli1575: Misc cleanup

From: Christophe Leroy <[email protected]>

Use a single line for uli_exclude_device().

Add uli_exclude_device() prototype in ppc-pci.h and guard it.

Remove that prototype from mpc85xx_ds.c and mpc86xx_hpcn.c files.

Make uli_pirq_to_irq[] static as it is used only in that file.

---
 arch/powerpc/include/asm/ppc-pci.h         | 9 +++++++++
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   | 4 +---
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 4 +---
 arch/powerpc/platforms/fsl_uli1575.c       | 6 +++---
 4 files changed, 14 insertions(+), 9 deletions(-)
arch/powerpc/include/asm/ppc-pci.h +9 -0
index f6cf0159024e..a8db969dd595 100644
@@ -57,11 +57,20 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev);
 
 #endif /* CONFIG_EEH */
 
+#ifdef CONFIG_FSL_ULI1575
+int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn);
+#endif /* CONFIG_FSL_ULI1575 */
+
 #define PCI_BUSNO(bdfn) ((bdfn >> 8) & 0xff)
 
 #else /* CONFIG_PCI */
 static inline void init_pci_config_tokens(void) { }
 #endif /* !CONFIG_PCI */
 
+#if !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575)
+#include <linux/pci.h>
+static inline int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { return PCIBIOS_SUCCESSFUL; }
+#endif /* !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575) */
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_PPC_PCI_H */
arch/powerpc/platforms/85xx/mpc85xx_ds.c +1 -3
index 70167b8f00a3..ed7b71d55b10 100644
@@ -26,6 +26,7 @@
 #include <asm/mpic.h>
 #include <asm/i8259.h>
 #include <asm/swiotlb.h>
+#include <asm/ppc-pci.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
@@ -107,9 +108,6 @@ void __init mpc85xx_ds_pic_init(void)
 }
 
 #ifdef CONFIG_PCI
-extern int uli_exclude_device(struct pci_controller *hose,
-				u_char bus, u_char devfn);
-
 static struct device_node *pci_with_uli;
 
 static int mpc85xx_exclude_device(struct pci_controller *hose,
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +1 -3
index 7b00ebd2d7f8..3dbd396a0df5 100644
@@ -22,6 +22,7 @@
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
 #include <asm/swiotlb.h>
+#include <asm/ppc-pci.h>
 
 #include <asm/mpic.h>
 
@@ -39,9 +40,6 @@
 #endif
 
 #ifdef CONFIG_PCI
-extern int uli_exclude_device(struct pci_controller *hose,
-				u_char bus, u_char devfn);
-
 static int mpc86xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
 {
arch/powerpc/platforms/fsl_uli1575.c +3 -3
index 84afae7a2561..a32f9cef7845 100644
@@ -13,6 +13,7 @@
 #include <linux/of_irq.h>
 
 #include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
 
 #define ULI_PIRQA	0x08
 #define ULI_PIRQB	0x09
@@ -36,7 +37,7 @@
 #define ULI_8259_IRQ14	0x0d
 #define ULI_8259_IRQ15	0x0f
 
-u8 uli_pirq_to_irq[8] = {
+static u8 uli_pirq_to_irq[8] = {
 	ULI_8259_IRQ9,		/* PIRQA */
 	ULI_8259_IRQ10,		/* PIRQB */
 	ULI_8259_IRQ11,		/* PIRQC */
@@ -341,8 +342,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
 
-int uli_exclude_device(struct pci_controller *hose,
-			u_char bus, u_char devfn)
+int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 {
 	if (bus == (hose->first_busno + 2)) {
 		/* exclude Modem controller */
Signature · 1 line
2.20.1
#2 lore raw

PATCH v3 2/8 powerpc/85xx: mpc85xx_ds: Simplify mpc85xx_exclude_device() function

In reply to Pali Rohár

Function mpc85xx_exclude_device() is installed and used only when pci_with_uli is fsl_pci_primary. So replace check for pci_with_uli by fsl_pci_primary in mpc85xx_exclude_device() and move pci_with_uli variable declaration into function mpc85xx_ds_uli_init() where it is used.

---
 arch/powerpc/platforms/85xx/mpc85xx_ds.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
arch/powerpc/platforms/85xx/mpc85xx_ds.c +2 -3
index ed7b71d55b10..0c905a838942 100644
@@ -108,12 +108,10 @@ void __init mpc85xx_ds_pic_init(void)
 }
 
 #ifdef CONFIG_PCI
-static struct device_node *pci_with_uli;
-
 static int mpc85xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
 {
-	if (hose->dn == pci_with_uli)
+	if (hose->dn == fsl_pci_primary)
 		return uli_exclude_device(hose, bus, devfn);
 
 	return PCIBIOS_SUCCESSFUL;
@@ -124,6 +122,7 @@ static void __init mpc85xx_ds_uli_init(void)
 {
 #ifdef CONFIG_PCI
 	struct device_node *node;
+	struct device_node *pci_with_uli;
 
 	/* See if we have a ULI under the primary */
 
Signature · 1 line
2.20.1
#3 lore raw

PATCH v3 3/8 powerpc/fsl_uli1575: Simplify uli_exclude_device() usage

In reply to Pali Rohár

Function uli_exclude_device() is called only from mpc86xx_exclude_device() and mpc85xx_exclude_device() functions. Both those functions are same, so merge its logic directly into the uli_exclude_device() function.

---
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   | 13 +------------
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 13 +------------
 arch/powerpc/platforms/fsl_uli1575.c       |  4 +++-
 3 files changed, 5 insertions(+), 25 deletions(-)
arch/powerpc/platforms/85xx/mpc85xx_ds.c +1 -12
index 0c905a838942..581b5f0ef3be 100644
@@ -107,17 +107,6 @@ void __init mpc85xx_ds_pic_init(void)
 #endif	/* CONFIG_PPC_I8259 */
 }
 
-#ifdef CONFIG_PCI
-static int mpc85xx_exclude_device(struct pci_controller *hose,
-				   u_char bus, u_char devfn)
-{
-	if (hose->dn == fsl_pci_primary)
-		return uli_exclude_device(hose, bus, devfn);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-#endif	/* CONFIG_PCI */
-
 static void __init mpc85xx_ds_uli_init(void)
 {
 #ifdef CONFIG_PCI
@@ -132,7 +121,7 @@ static void __init mpc85xx_ds_uli_init(void)
 		node = pci_with_uli;
 
 		if (pci_with_uli == fsl_pci_primary) {
-			ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+			ppc_md.pci_exclude_device = uli_exclude_device;
 			break;
 		}
 	}
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +1 -12
index 3dbd396a0df5..645125cc8420 100644
@@ -39,17 +39,6 @@
 #define DBG(fmt...) do { } while(0)
 #endif
 
-#ifdef CONFIG_PCI
-static int mpc86xx_exclude_device(struct pci_controller *hose,
-				   u_char bus, u_char devfn)
-{
-	if (hose->dn == fsl_pci_primary)
-		return uli_exclude_device(hose, bus, devfn);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-#endif /* CONFIG_PCI */
-
 
 static void __init
 mpc86xx_hpcn_setup_arch(void)
@@ -58,7 +47,7 @@ mpc86xx_hpcn_setup_arch(void)
 		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
 
 #ifdef CONFIG_PCI
-	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
+	ppc_md.pci_exclude_device = uli_exclude_device;
 #endif
 
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
arch/powerpc/platforms/fsl_uli1575.c +3 -1
index a32f9cef7845..1350db0b935d 100644
@@ -15,6 +15,8 @@
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>
 
+#include <sysdev/fsl_pci.h>
+
 #define ULI_PIRQA	0x08
 #define ULI_PIRQB	0x09
 #define ULI_PIRQC	0x0a
@@ -344,7 +346,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
 
 int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 {
-	if (bus == (hose->first_busno + 2)) {
+	if (hose->dn == fsl_pci_primary && bus == (hose->first_busno + 2)) {
 		/* exclude Modem controller */
 		if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 1))
 			return PCIBIOS_DEVICE_NOT_FOUND;
Signature · 1 line
2.20.1
#4 lore raw

PATCH v3 4/8 powerpc/85xx: mpc85xx_ds: Move uli_init() code into its own driver file

In reply to Pali Rohár

Move uli_init() function into existing driver fsl_uli1575.c file in order to share its code between more platforms and board files.

---
 arch/powerpc/include/asm/ppc-pci.h       |  2 ++
 arch/powerpc/platforms/85xx/mpc85xx_ds.c | 23 +----------------------
 arch/powerpc/platforms/fsl_uli1575.c     | 19 +++++++++++++++++++
 3 files changed, 22 insertions(+), 22 deletions(-)
arch/powerpc/include/asm/ppc-pci.h +2 -0
index a8db969dd595..0e393aeed912 100644
@@ -59,6 +59,7 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev);
 
 #ifdef CONFIG_FSL_ULI1575
 int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn);
+void __init uli_init(void);
 #endif /* CONFIG_FSL_ULI1575 */
 
 #define PCI_BUSNO(bdfn) ((bdfn >> 8) & 0xff)
@@ -70,6 +71,7 @@ static inline void init_pci_config_tokens(void) { }
 #if !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575)
 #include <linux/pci.h>
 static inline int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { return PCIBIOS_SUCCESSFUL; }
+static inline void __init uli_init(void) {}
 #endif /* !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575) */
 
 #endif /* __KERNEL__ */
arch/powerpc/platforms/85xx/mpc85xx_ds.c +1 -22
index 581b5f0ef3be..c474da3eeea8 100644
@@ -107,27 +107,6 @@ void __init mpc85xx_ds_pic_init(void)
 #endif	/* CONFIG_PPC_I8259 */
 }
 
-static void __init mpc85xx_ds_uli_init(void)
-{
-#ifdef CONFIG_PCI
-	struct device_node *node;
-	struct device_node *pci_with_uli;
-
-	/* See if we have a ULI under the primary */
-
-	node = of_find_node_by_name(NULL, "uli1575");
-	while ((pci_with_uli = of_get_parent(node))) {
-		of_node_put(node);
-		node = pci_with_uli;
-
-		if (pci_with_uli == fsl_pci_primary) {
-			ppc_md.pci_exclude_device = uli_exclude_device;
-			break;
-		}
-	}
-#endif
-}
-
 /*
  * Setup the architecture
  */
@@ -138,7 +117,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 
 	swiotlb_detect_4g();
 	fsl_pci_assign_primary();
-	mpc85xx_ds_uli_init();
+	uli_init();
 	mpc85xx_smp_init();
 
 	printk("MPC85xx DS board from Freescale Semiconductor\n");
arch/powerpc/platforms/fsl_uli1575.c +19 -0
index 1350db0b935d..b073db9d7c79 100644
@@ -358,3 +358,22 @@ int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 
 	return PCIBIOS_SUCCESSFUL;
 }
+
+void __init uli_init(void)
+{
+	struct device_node *node;
+	struct device_node *pci_with_uli;
+
+	/* See if we have a ULI under the primary */
+
+	node = of_find_node_by_name(NULL, "uli1575");
+	while ((pci_with_uli = of_get_parent(node))) {
+		of_node_put(node);
+		node = pci_with_uli;
+
+		if (pci_with_uli == fsl_pci_primary) {
+			ppc_md.pci_exclude_device = uli_exclude_device;
+			break;
+		}
+	}
+}
Signature · 1 line
2.20.1
#5 lore raw

PATCH v3 5/8 powerpc/85xx: mpc85xx_rdb: Do not automatically select FSL_ULI1575

In reply to Pali Rohár

Boards provided by CONFIG_MPC85xx_RDB option do not initialize fsl_uli1575.c driver. So remove explicit select dependency on it.

---
 arch/powerpc/platforms/85xx/Kconfig | 1 -
 1 file changed, 1 deletion(-)
arch/powerpc/platforms/85xx/Kconfig +0 -1
index b92cb2b4d54d..a8ce6616fd0a 100644
@@ -90,7 +90,6 @@ config MPC85xx_RDB
 	bool "Freescale P102x MBG/UTM/RDB and P2020 RDB"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
-	select FSL_ULI1575 if PCI
 	select SWIOTLB
 	help
 	  This option enables support for the P1020 MBG PC, P1020 UTM PC,
Signature · 1 line
2.20.1
#8 lore raw

PATCH v3 8/8 powerpc/fsl_uli1575: Mark uli_exclude_device() as static

In reply to Pali Rohár

Function uli_exclude_device() is not used outside of the fsl_uli1575.c source file anymore. So mark it as static and remove public prototype.

---
 arch/powerpc/include/asm/ppc-pci.h   | 3 ---
 arch/powerpc/platforms/fsl_uli1575.c | 2 +-
 2 files changed, 1 insertion(+), 4 deletions(-)
arch/powerpc/include/asm/ppc-pci.h +0 -3
index 0e393aeed912..d9fcff575027 100644
@@ -58,7 +58,6 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev);
 #endif /* CONFIG_EEH */
 
 #ifdef CONFIG_FSL_ULI1575
-int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn);
 void __init uli_init(void);
 #endif /* CONFIG_FSL_ULI1575 */
 
@@ -69,8 +68,6 @@ static inline void init_pci_config_tokens(void) { }
 #endif /* !CONFIG_PCI */
 
 #if !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575)
-#include <linux/pci.h>
-static inline int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { return PCIBIOS_SUCCESSFUL; }
 static inline void __init uli_init(void) {}
 #endif /* !defined(CONFIG_PCI) || !defined(CONFIG_FSL_ULI1575) */
 
arch/powerpc/platforms/fsl_uli1575.c +1 -1
index b073db9d7c79..b8d37a9932f1 100644
@@ -344,7 +344,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
 
-int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
+static int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 {
 	if (hose->dn == fsl_pci_primary && bus == (hose->first_busno + 2)) {
 		/* exclude Modem controller */
Signature · 1 line
2.20.1
#6 lore raw

PATCH v3 6/8 powerpc/fsl_uli1575: Allow to disable FSL_ULI1575 support

In reply to Pali Rohár

ULI1575 PCIe south bridge exists only on some Freescale boards. Allow to disable CONFIG_FSL_ULI1575 symbol when it is not explicitly selected and only implied. This is achieved by marking symbol as visible by providing short description. Also adds dependency for this symbol to prevent enabling it on platforms on which driver does not compile.

---
 arch/powerpc/platforms/Kconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
arch/powerpc/platforms/Kconfig +3 -1
index d41dad227de8..608ac0290e3a 100644
@@ -261,7 +261,9 @@ config CPM2
 	  on it (826x, 827x, 8560).
 
 config FSL_ULI1575
-	bool
+	bool "ULI1575 PCIe south bridge support"
+	depends on FSL_SOC_BOOKE || PPC_86xx
+	select FSL_PCI
 	select GENERIC_ISA_DMA
 	help
 	  Supports for the ULI1575 PCIe south bridge that exists on some
Signature · 1 line
2.20.1
#7 lore raw

PATCH v3 7/8 powerpc/86xx: mpc86xx_hpcn: Call uli_init() instead of explicit ppc_md assignment

In reply to Pali Rohár

After calling fsl_pci_assign_primary(), it is possible to use uli_init() to conditionally initialize ppc_md.pci_exclude_device callback based on the uli1575 detection.

---
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +1 -4
index 645125cc8420..812110673d88 100644
@@ -46,10 +46,6 @@ mpc86xx_hpcn_setup_arch(void)
 	if (ppc_md.progress)
 		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	ppc_md.pci_exclude_device = uli_exclude_device;
-#endif
-
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
 
 #ifdef CONFIG_SMP
@@ -57,6 +53,7 @@ mpc86xx_hpcn_setup_arch(void)
 #endif
 
 	fsl_pci_assign_primary();
+	uli_init();
 
 	swiotlb_detect_4g();
 }
Signature · 1 line
2.20.1
#9 lore raw
In reply to Pali Rohár
Quoted 11 lines · Pali Rohár

This patch series contains cleanups for fsl_uli1575 driver.

This patch series is prerequisite for another patch series:
"powerpc/85xx: p2020: Create one unified machine description"
https://lore.kernel.org/linuxppc-dev/[email protected]/t/#u

Changes in v3:
* Fixed compile error in the sixth patch when driver was explicitly enabled on unsupported platform

[...]

Applied to powerpc/next.

[1/8] powerpc/fsl_uli1575: Misc cleanup

      https://git.kernel.org/powerpc/c/821b3a471f686910b97228010861c4a99d07fd86
[2/8] powerpc/85xx: mpc85xx_ds: Simplify mpc85xx_exclude_device() function
      https://git.kernel.org/powerpc/c/485536b9f289c8c3c86ecaad0f05a1a7b633cb8a
[3/8] powerpc/fsl_uli1575: Simplify uli_exclude_device() usage
      https://git.kernel.org/powerpc/c/aa9f3d2d619b878a66dc918d8b3bf984300f975f
[4/8] powerpc/85xx: mpc85xx_ds: Move uli_init() code into its own driver file
      https://git.kernel.org/powerpc/c/c4f6d8665cff0abacd164b3cd10afe0385290db2
[5/8] powerpc/85xx: mpc85xx_rdb: Do not automatically select FSL_ULI1575
      https://git.kernel.org/powerpc/c/304e364d1f89f590b72af6bec42b5199971b531b
[6/8] powerpc/fsl_uli1575: Allow to disable FSL_ULI1575 support
      https://git.kernel.org/powerpc/c/22fdf79171e8509db54599fd2c05ef0022ee83f5
[7/8] powerpc/86xx: mpc86xx_hpcn: Call uli_init() instead of explicit ppc_md assignment
      https://git.kernel.org/powerpc/c/40b221daf17bf8e0f27c7f1ffc8d5179d58e8597
[8/8] powerpc/fsl_uli1575: Mark uli_exclude_device() as static
      https://git.kernel.org/powerpc/c/3ce271435b717e1dbc4fc8191a69e88deb4f8990

cheers