Skip to contentSkip to conversation

platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3

PATCH In review David E. Box 2 participants 2 messages Apr 9, 2023 – Apr 11, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3

On Meteor Lake, the GNA, IPU, and VPU devices are booted in D0 power state and will block the SoC from going into the deepest Package C-state if a driver is not present. Put each device in D3hot if no driver is found.

---

V2 - Fix missing static reported by lkp

 drivers/platform/x86/intel/pmc/mtl.c | 31 ++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/platform/x86/intel/pmc/mtl.c +31 -0
index eeb3bd8c2502..33aa98b54049 100644
@@ -8,6 +8,7 @@
  *
  */
 
+#include <linux/pci.h>
 #include "core.h"
 
 const struct pmc_reg_map mtl_reg_map = {
@@ -45,8 +46,38 @@ void mtl_core_configure(struct pmc_dev *pmcdev)
 	pmc_core_send_ltr_ignore(pmcdev, 3);
 }
 
+#define MTL_GNA_PCI_DEV	0x7e4c
+#define MTL_IPU_PCI_DEV	0x7d19
+#define MTL_VPU_PCI_DEV	0x7d1d
+static void mtl_set_device_d3(unsigned int device)
+{
+	struct pci_dev *pcidev;
+
+	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, device, NULL);
+	if (pcidev) {
+		if (!device_trylock(&pcidev->dev)) {
+			pci_dev_put(pcidev);
+			return;
+		}
+		if (!pcidev->dev.driver) {
+			dev_info(&pcidev->dev, "Setting to D3hot\n");
+			pci_set_power_state(pcidev, PCI_D3hot);
+		}
+		device_unlock(&pcidev->dev);
+		pci_dev_put(pcidev);
+	}
+}
+
 void mtl_core_init(struct pmc_dev *pmcdev)
 {
 	pmcdev->map = &mtl_reg_map;
 	pmcdev->core_configure = mtl_core_configure;
+
+	/*
+	 * Set power state of select devices that do not have drivers to D3
+	 * so that they do not block Package C entry.
+	 */
+	mtl_set_device_d3(MTL_GNA_PCI_DEV);
+	mtl_set_device_d3(MTL_IPU_PCI_DEV);
+	mtl_set_device_d3(MTL_VPU_PCI_DEV);
 }

base-commit: 4f59630a5ed0a4e7d275bd7e5d253a8f5a425c5a

Signature · 1 line
2.34.1
#1 lore raw

Hi,

Quoted 9 lines · David E. Box

On Meteor Lake, the GNA, IPU, and VPU devices are booted in D0 power state and will block the SoC from going into the deepest Package C-state if a driver is not present. Put each device in D3hot if no driver is found.

---

V2 - Fix missing static reported by lkp

Thank you for your patch, I've applied this patch to my review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window.

Regards,

Hans

Quoted 57 lines
 drivers/platform/x86/intel/pmc/mtl.c | 31 ++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/platform/x86/intel/pmc/mtl.c +31 -0
index eeb3bd8c2502..33aa98b54049 100644
@@ -8,6 +8,7 @@
  *
  */
 
+#include <linux/pci.h>
 #include "core.h"
 
 const struct pmc_reg_map mtl_reg_map = {
@@ -45,8 +46,38 @@ void mtl_core_configure(struct pmc_dev *pmcdev)
 	pmc_core_send_ltr_ignore(pmcdev, 3);
 }
 
+#define MTL_GNA_PCI_DEV	0x7e4c
+#define MTL_IPU_PCI_DEV	0x7d19
+#define MTL_VPU_PCI_DEV	0x7d1d
+static void mtl_set_device_d3(unsigned int device)
+{
+	struct pci_dev *pcidev;
+
+	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, device, NULL);
+	if (pcidev) {
+		if (!device_trylock(&pcidev->dev)) {
+			pci_dev_put(pcidev);
+			return;
+		}
+		if (!pcidev->dev.driver) {
+			dev_info(&pcidev->dev, "Setting to D3hot\n");
+			pci_set_power_state(pcidev, PCI_D3hot);
+		}
+		device_unlock(&pcidev->dev);
+		pci_dev_put(pcidev);
+	}
+}
+
 void mtl_core_init(struct pmc_dev *pmcdev)
 {
 	pmcdev->map = &mtl_reg_map;
 	pmcdev->core_configure = mtl_core_configure;
+
+	/*
+	 * Set power state of select devices that do not have drivers to D3
+	 * so that they do not block Package C entry.
+	 */
+	mtl_set_device_d3(MTL_GNA_PCI_DEV);
+	mtl_set_device_d3(MTL_IPU_PCI_DEV);
+	mtl_set_device_d3(MTL_VPU_PCI_DEV);
 }

base-commit: 4f59630a5ed0a4e7d275bd7e5d253a8f5a425c5a