Sync TI Device Trees with Linux v6.3-rc6
PATCH 3/17 arm: dts: am57x: Update devicetree header comments to sync with v6.3-rc6
In reply to Andrew Davis--- arch/arm/dts/am571x-idk.dts | 7 ++----- arch/arm/dts/am5729-beagleboneai.dts | 1 + arch/arm/dts/am572x-idk-common.dtsi | 2 +- arch/arm/dts/am572x-idk.dts | 7 ++----- arch/arm/dts/am574x-idk.dts | 2 +- arch/arm/dts/am57xx-beagle-x15-common.dtsi | 7 ++----- arch/arm/dts/am57xx-beagle-x15-revb1.dts | 7 ++----- arch/arm/dts/am57xx-beagle-x15-revc.dts | 7 ++----- arch/arm/dts/am57xx-beagle-x15.dts | 7 ++----- arch/arm/dts/am57xx-idk-common.dtsi | 7 ++----- 10 files changed, 17 insertions(+), 37 deletions(-)
arch/arm/dts/am571x-idk.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/am5729-beagleboneai.dts +1 -0
@@ -4,6 +4,7 @@ */ /dts-v1/; + #include "dra74x.dtsi" #include "dra74x-mmc-iodelay.dtsi" #include <dt-bindings/gpio/gpio.h>
arch/arm/dts/am572x-idk-common.dtsi +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/gpio/gpio.h>
arch/arm/dts/am572x-idk.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/am574x-idk.dts +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */
arch/arm/dts/am57xx-beagle-x15-common.dtsi +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/am57xx-beagle-x15-revb1.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "am57xx-beagle-x15-common.dtsi"
arch/arm/dts/am57xx-beagle-x15-revc.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/ */ #include "am57xx-beagle-x15-common.dtsi"
arch/arm/dts/am57xx-beagle-x15.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "am57xx-beagle-x15-common.dtsi"
arch/arm/dts/am57xx-idk-common.dtsi +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "am57xx-industrial-grade.dtsi"
Signature · 1 line
2.39.2
PATCH 4/17 arm: dts: dm8x: Update devicetree header comments to sync with v6.3-rc6
In reply to Andrew Davis--- arch/arm/dts/da850-evm.dts | 7 ++----- arch/arm/dts/da850-lcdk.dts | 3 +-- arch/arm/dts/da850-lego-ev3.dts | 6 +----- arch/arm/dts/da850.dtsi | 6 +----- arch/arm/dts/dm8168-evm.dts | 6 +----- arch/arm/dts/dm816x-clocks.dtsi | 6 +----- arch/arm/dts/dm816x.dtsi | 6 +----- 7 files changed, 8 insertions(+), 32 deletions(-)
arch/arm/dts/da850-evm.dts +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree for DA850 EVM board * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation, version 2. + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; #include "da850.dtsi"
arch/arm/dts/da850-lcdk.dts +1 -2
@@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2016 BayLibre, Inc. - * - * Licensed under GPLv2. */ /dts-v1/; #include "da850.dtsi"
arch/arm/dts/da850-lego-ev3.dts +1 -5
@@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device tree for LEGO MINDSTORMS EV3 * * Copyright (C) 2017 David Lechner <[email protected]> - * - * SPDX-License-Identifier: GPL-2.0+ - * - * This is an absolute minimum device tree instead of using the one from Linux - * because the bootloader on the EV3 is limited to 256k. This saves us >10k. */ /dts-v1/;
arch/arm/dts/da850.dtsi +1 -5
@@ -1,11 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 DENX Software Engineering GmbH * Heiko Schocher <[email protected]> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <dt-bindings/interrupt-controller/irq.h>
arch/arm/dts/dm8168-evm.dts +1 -5
@@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include "dm816x.dtsi"
arch/arm/dts/dm816x-clocks.dtsi +1 -5
@@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only &scrm { main_fapll: main_fapll {
arch/arm/dts/dm816x.dtsi +1 -5
@@ -1,8 +1,4 @@ -/* - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/omap.h>
Signature · 1 line
2.39.2
PATCH 6/17 arm: dts: omap3x: Update devicetree header comments to sync with v6.3-rc6
In reply to Andrew Davis--- arch/arm/dts/omap-gpmc-smsc9221.dtsi | 1 + arch/arm/dts/omap3-beagle-xm-ab.dts | 7 ++----- arch/arm/dts/omap3-beagle-xm.dts | 7 ++----- arch/arm/dts/omap3-beagle.dts | 7 ++----- arch/arm/dts/omap3-cpu-thermal.dtsi | 7 ++----- arch/arm/dts/omap3-evm-37xx.dts | 7 ++----- arch/arm/dts/omap3-evm.dts | 7 ++----- arch/arm/dts/omap3-igep.dtsi | 7 ++----- arch/arm/dts/omap3-igep0020-common.dtsi | 7 ++----- arch/arm/dts/omap3-igep0020.dts | 7 ++----- arch/arm/dts/omap3.dtsi | 7 ++----- arch/arm/dts/omap34xx-omap36xx-clocks.dtsi | 5 +---- arch/arm/dts/omap34xx.dtsi | 7 ++----- arch/arm/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi | 5 +---- arch/arm/dts/omap36xx-clocks.dtsi | 5 +---- arch/arm/dts/omap36xx-omap3430es2plus-clocks.dtsi | 5 +---- arch/arm/dts/omap36xx.dtsi | 7 ++----- arch/arm/dts/omap3xxx-clocks.dtsi | 5 +---- 18 files changed, 30 insertions(+), 80 deletions(-)
arch/arm/dts/omap-gpmc-smsc9221.dtsi +1 -0
@@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Common file for GPMC connected smsc9221 on omaps *
arch/arm/dts/omap3-beagle-xm-ab.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ #include "omap3-beagle-xm.dts"
arch/arm/dts/omap3-beagle-xm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/omap3-beagle.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/omap3-cpu-thermal.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3 SoC CPU thermal * - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/thermal/thermal.h>
arch/arm/dts/omap3-evm-37xx.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/omap3-evm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/omap3-igep.dtsi +2 -5
@@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Common device tree for IGEP boards based on AM/DM37x * - * Copyright (C) 2012 Javier Martinez Canillas <[email protected]> + * Copyright (C) 2012 Javier Martinez Canillas <[email protected]> * Copyright (C) 2012 Enric Balletbo i Serra <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/;
arch/arm/dts/omap3-igep0020-common.dtsi +2 -5
@@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Common Device Tree Source for IGEPv2 * - * Copyright (C) 2014 Javier Martinez Canillas <[email protected]> + * Copyright (C) 2014 Javier Martinez Canillas <[email protected]> * Copyright (C) 2014 Enric Balletbo i Serra <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-igep.dtsi"
arch/arm/dts/omap3-igep0020.dts +2 -5
@@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <[email protected]> + * Copyright (C) 2012 Javier Martinez Canillas <[email protected]> * Copyright (C) 2012 Enric Balletbo i Serra <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-igep0020-common.dtsi"
arch/arm/dts/omap3.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3 SoC * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/gpio/gpio.h>
arch/arm/dts/omap34xx-omap36xx-clocks.dtsi +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP34XX/OMAP36XX clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm_clocks { security_l4_ick2: security_l4_ick2 {
arch/arm/dts/omap34xx.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP34xx/OMAP35xx SoC * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/media/omap3-isp.h>
arch/arm/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &prm_clocks { corex2_d3_fck: corex2_d3_fck {
arch/arm/dts/omap36xx-clocks.dtsi +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP36xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm_clocks { dpll4_ck: dpll4_ck@d00 {
arch/arm/dts/omap36xx-omap3430es2plus-clocks.dtsi +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP34xx/OMAP36xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm_clocks { ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 {
arch/arm/dts/omap36xx.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3 SoC * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/bus/ti-sysc.h>
arch/arm/dts/omap3xxx-clocks.dtsi +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3 clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &prm_clocks { virt_16_8m_ck: virt_16_8m_ck {
Signature · 1 line
2.39.2
PATCH 5/17 arm: dts: dra7x: Update devicetree header comments to sync with v6.3-rc6
In reply to Andrew Davis--- arch/arm/dts/dra7-dspeve-thermal.dtsi | 7 ++----- arch/arm/dts/dra7-evm-common.dtsi | 7 ++----- arch/arm/dts/dra7-evm.dts | 7 ++----- arch/arm/dts/dra7-iva-thermal.dtsi | 7 ++----- arch/arm/dts/dra7-mmc-iodelay.dtsi | 2 +- arch/arm/dts/dra7.dtsi | 6 ++---- arch/arm/dts/dra71-evm.dts | 7 ++----- arch/arm/dts/dra72-evm-common.dtsi | 7 ++----- arch/arm/dts/dra72-evm-revc.dts | 7 ++----- arch/arm/dts/dra72-evm-tps65917.dtsi | 7 ++----- arch/arm/dts/dra72-evm.dts | 7 ++----- arch/arm/dts/dra72x-mmc-iodelay.dtsi | 12 ++---------- arch/arm/dts/dra72x.dtsi | 6 ++---- arch/arm/dts/dra74x-mmc-iodelay.dtsi | 12 ++---------- arch/arm/dts/dra74x.dtsi | 6 ++---- arch/arm/dts/dra76-evm.dts | 7 ++----- arch/arm/dts/dra76x.dtsi | 7 ++----- arch/arm/dts/dra7xx-clocks.dtsi | 5 +---- 18 files changed, 34 insertions(+), 92 deletions(-)
arch/arm/dts/dra7-dspeve-thermal.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for DRA7x SoC DSPEVE thermal * - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/thermal/thermal.h>
arch/arm/dts/dra7-evm-common.dtsi +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/gpio/gpio.h>
arch/arm/dts/dra7-evm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/dra7-iva-thermal.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for DRA7x SoC IVA thermal * - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/thermal/thermal.h>
arch/arm/dts/dra7-mmc-iodelay.dtsi +1 -1
@@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* * MMC IOdelay values for TI's DRA7xx SoCs. - * Copyright (C) 2019 Texas Instruments + * Copyright (C) 2018 Texas Instruments * Author: Faiz Abbas <[email protected]> */
arch/arm/dts/dra7.dtsi +2 -4
@@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. * Based on "omap4.dtsi" */
arch/arm/dts/dra71-evm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra72-evm-common.dtsi"
arch/arm/dts/dra72-evm-common.dtsi +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/dra72-evm-revc.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra72-evm-common.dtsi" #include "dra72x-mmc-iodelay.dtsi"
arch/arm/dts/dra72-evm-tps65917.dtsi +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ /*
arch/arm/dts/dra72-evm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra72-evm-common.dtsi" #include "dra72x-mmc-iodelay.dtsi"
arch/arm/dts/dra72x-mmc-iodelay.dtsi +2 -10
@@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs. * - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ /*
arch/arm/dts/dra72x.dtsi +2 -4
@@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. * Based on "omap4.dtsi" */
arch/arm/dts/dra74x-mmc-iodelay.dtsi +2 -10
@@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs. * - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ /*
arch/arm/dts/dra74x.dtsi +2 -4
@@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. * Based on "omap4.dtsi" */
arch/arm/dts/dra76-evm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/dra76x.dtsi +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra74x.dtsi"
arch/arm/dts/dra7xx-clocks.dtsi +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for DRA7xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm_core_aon_clocks { atl_clkin0_ck: atl_clkin0_ck {
Signature · 1 line
2.39.2
cover Sync TI Device Trees with Linux v6.3-rc6
Hello all,
Some of the Device Tree files in U-Boot have become out of sync with the ones in the Linux kernel tree. To start fixing this, make some of the more trivial changes for the non-K3 TI SoC based devices.
The first 9 patches just update the comment headers which should be completely safe and helps make later syncs look less busy.
Next 2 update AM3x/AM4x pinmux to new macros, also should make no functional change to the boards.
Next 5 are also intended to be non-functional but never hurts to get a round of additional testing from folks with these boards to be sure.
Last change is the only functional change, it fixes boot on DRA7-EVMs.
Thanks,
Andrew
Andrew Davis (17):
arm: dts: am3x: Update devicetree header comments to sync with
v6.3-rc6
arm: dts: am43x: Update devicetree header comments to sync with
v6.3-rc6
arm: dts: am57x: Update devicetree header comments to sync with
v6.3-rc6
arm: dts: dm8x: Update devicetree header comments to sync with
v6.3-rc6
arm: dts: dra7x: Update devicetree header comments to sync with
v6.3-rc6
arm: dts: omap3x: Update devicetree header comments to sync with
v6.3-rc6
arm: dts: omap4x: Update devicetree header comments to sync with
v6.3-rc6
arm: dts: omap5x: Update devicetree header comments to sync with
v6.3-rc6
arm: dts: keystone: Update devicetree header comments to sync with
v6.3-rc6 arm: dts: am3x: Update IOPAD to PADCONF to sync with v6.3-rc6
arm: dts: am437x: Update to IOPAD to sync with v6.3-rc6
arm: dts: am3x: Non-functional changes sync with v6.3-rc6
arm: dts: dra7x: Non-functional changes sync with v6.3-rc6
arm: dts: dm8x: Non-functional changes sync with v6.3-rc6
arm: dts: omap: Non-functional changes sync with v6.3-rc6
arm: dts: keystone: Non-functional changes sync with v6.3-rc6 Revert "arm: dts: dra7*/am57xx-idk-evm-u-boot: Add ipu early boot DT
changes"
arch/arm/dts/am335x-base0033.dts | 53 ++- arch/arm/dts/am335x-bone-common.dtsi | 1 - arch/arm/dts/am335x-boneblack-hdmi.dtsi | 7 +- arch/arm/dts/am335x-boneblack-wireless.dts | 2 +- arch/arm/dts/am335x-boneblack.dts | 4 + arch/arm/dts/am335x-boneblue.dts | 2 +- arch/arm/dts/am335x-bonegreen-wireless.dts | 2 +- arch/arm/dts/am335x-chiliboard.dts | 73 ++-- arch/arm/dts/am335x-chilisom.dtsi | 41 +- arch/arm/dts/am335x-evm.dts | 265 ++++++------- arch/arm/dts/am335x-evmsk.dts | 321 ++++++++-------- arch/arm/dts/am335x-guardian.dts | 12 +- arch/arm/dts/am335x-icev2.dts | 254 +++++++------ arch/arm/dts/am335x-igep0033.dtsi | 49 ++- arch/arm/dts/am335x-osd335x-common.dtsi | 6 +- arch/arm/dts/am335x-pdu001.dts | 174 ++++----- arch/arm/dts/am335x-phycore-som.dtsi | 86 ++--- arch/arm/dts/am335x-pocketbeagle.dts | 64 ++-- arch/arm/dts/am335x-pxm2.dtsi | 2 +- arch/arm/dts/am335x-regor.dtsi | 80 ++-- arch/arm/dts/am335x-rut.dts | 2 +- .../dts/am335x-sancloud-bbe-extended-wifi.dts | 2 +- arch/arm/dts/am335x-shc.dts | 240 ++++++------ arch/arm/dts/am335x-sl50.dts | 151 ++++---- arch/arm/dts/am335x-wega-rdk.dts | 6 +- arch/arm/dts/am335x-wega.dtsi | 90 ++--- arch/arm/dts/am33xx-clocks.dtsi | 169 ++++----- arch/arm/dts/am33xx-l4.dtsi | 10 +- arch/arm/dts/am33xx.dtsi | 19 +- arch/arm/dts/am3517-evm-ui.dtsi | 28 +- arch/arm/dts/am3517-evm.dts | 36 +- arch/arm/dts/am3517.dtsi | 9 +- arch/arm/dts/am35xx-clocks.dtsi | 5 +- arch/arm/dts/am4372.dtsi | 7 +- arch/arm/dts/am437x-gp-evm.dts | 322 ++++++++-------- arch/arm/dts/am437x-idk-evm.dts | 7 +- arch/arm/dts/am437x-sk-evm.dts | 297 ++++++++------- arch/arm/dts/am43x-epos-evm.dts | 7 +- arch/arm/dts/am43xx-clocks.dtsi | 5 +- arch/arm/dts/am571x-idk.dts | 13 +- arch/arm/dts/am5729-beagleboneai.dts | 1 + arch/arm/dts/am572x-idk-common.dtsi | 10 +- arch/arm/dts/am572x-idk.dts | 7 +- arch/arm/dts/am574x-idk.dts | 2 +- arch/arm/dts/am57xx-beagle-x15-common.dtsi | 15 +- arch/arm/dts/am57xx-beagle-x15-revb1.dts | 7 +- arch/arm/dts/am57xx-beagle-x15-revc.dts | 7 +- arch/arm/dts/am57xx-beagle-x15.dts | 7 +- arch/arm/dts/am57xx-idk-common-u-boot.dtsi | 1 - arch/arm/dts/am57xx-idk-common.dtsi | 11 +- arch/arm/dts/da850-evm.dts | 27 +- arch/arm/dts/da850-lcdk.dts | 3 +- arch/arm/dts/da850-lego-ev3.dts | 8 +- arch/arm/dts/da850.dtsi | 24 +- arch/arm/dts/dm8168-evm.dts | 16 +- arch/arm/dts/dm816x-clocks.dtsi | 6 +- arch/arm/dts/dm816x.dtsi | 23 +- arch/arm/dts/dra7-dspeve-thermal.dtsi | 7 +- arch/arm/dts/dra7-evm-common.dtsi | 19 +- arch/arm/dts/dra7-evm-u-boot.dtsi | 1 - arch/arm/dts/dra7-evm.dts | 11 +- arch/arm/dts/dra7-iva-thermal.dtsi | 7 +- arch/arm/dts/dra7-mmc-iodelay.dtsi | 2 +- arch/arm/dts/dra7.dtsi | 22 +- arch/arm/dts/dra71-evm-u-boot.dtsi | 1 - arch/arm/dts/dra71-evm.dts | 9 +- arch/arm/dts/dra72-evm-common.dtsi | 21 +- arch/arm/dts/dra72-evm-revc-u-boot.dtsi | 1 - arch/arm/dts/dra72-evm-revc.dts | 7 +- arch/arm/dts/dra72-evm-tps65917.dtsi | 9 +- arch/arm/dts/dra72-evm.dts | 7 +- arch/arm/dts/dra72x-mmc-iodelay.dtsi | 12 +- arch/arm/dts/dra72x.dtsi | 12 +- arch/arm/dts/dra74x-mmc-iodelay.dtsi | 12 +- arch/arm/dts/dra74x.dtsi | 14 +- arch/arm/dts/dra76-evm-u-boot.dtsi | 1 - arch/arm/dts/dra76-evm.dts | 11 +- arch/arm/dts/dra76x.dtsi | 7 +- arch/arm/dts/dra7xx-clocks.dtsi | 357 +++++++++--------- arch/arm/dts/keystone-clocks.dtsi | 59 ++- arch/arm/dts/keystone-k2e-clocks.dtsi | 15 +- arch/arm/dts/keystone-k2e-evm.dts | 11 +- arch/arm/dts/keystone-k2e-netcp.dtsi | 33 +- arch/arm/dts/keystone-k2e.dtsi | 17 +- arch/arm/dts/keystone-k2g-evm.dts | 11 +- arch/arm/dts/keystone-k2g-ice.dts | 4 +- arch/arm/dts/keystone-k2g-netcp.dtsi | 25 +- arch/arm/dts/keystone-k2g.dtsi | 9 +- arch/arm/dts/keystone-k2hk-clocks.dtsi | 81 ++-- arch/arm/dts/keystone-k2hk-evm.dts | 17 +- arch/arm/dts/keystone-k2hk-netcp.dtsi | 21 +- arch/arm/dts/keystone-k2hk.dtsi | 7 +- arch/arm/dts/keystone-k2l-clocks.dtsi | 51 ++- arch/arm/dts/keystone-k2l-evm.dts | 9 +- arch/arm/dts/keystone-k2l-netcp.dtsi | 26 +- arch/arm/dts/keystone-k2l.dtsi | 19 +- arch/arm/dts/keystone.dtsi | 21 +- arch/arm/dts/omap-gpmc-smsc911x.dtsi | 6 +- arch/arm/dts/omap-gpmc-smsc9221.dtsi | 7 +- arch/arm/dts/omap3-beagle-xm-ab.dts | 7 +- arch/arm/dts/omap3-beagle-xm.dts | 19 +- arch/arm/dts/omap3-beagle.dts | 13 +- arch/arm/dts/omap3-cpu-thermal.dtsi | 9 +- arch/arm/dts/omap3-evm-37xx.dts | 9 +- arch/arm/dts/omap3-evm-processor-common.dtsi | 2 +- arch/arm/dts/omap3-evm.dts | 9 +- arch/arm/dts/omap3-igep.dtsi | 9 +- arch/arm/dts/omap3-igep0020-common.dtsi | 7 +- arch/arm/dts/omap3-igep0020.dts | 7 +- arch/arm/dts/omap3.dtsi | 9 +- arch/arm/dts/omap34xx-omap36xx-clocks.dtsi | 5 +- arch/arm/dts/omap34xx.dtsi | 7 +- ...map36xx-am35xx-omap3430es2plus-clocks.dtsi | 5 +- arch/arm/dts/omap36xx-clocks.dtsi | 5 +- .../dts/omap36xx-omap3430es2plus-clocks.dtsi | 5 +- arch/arm/dts/omap36xx.dtsi | 7 +- arch/arm/dts/omap3xxx-clocks.dtsi | 5 +- arch/arm/dts/omap4-cpu-thermal.dtsi | 31 +- arch/arm/dts/omap4-l4.dtsi | 4 +- arch/arm/dts/omap4-panda-common.dtsi | 8 +- arch/arm/dts/omap4-panda-es.dts | 6 +- arch/arm/dts/omap4-panda.dts | 2 +- arch/arm/dts/omap4-sdp-es23plus.dts | 2 +- arch/arm/dts/omap4-sdp.dts | 38 +- arch/arm/dts/omap4.dtsi | 12 +- arch/arm/dts/omap443x-clocks.dtsi | 1 + arch/arm/dts/omap443x.dtsi | 7 +- arch/arm/dts/omap4460.dtsi | 7 +- arch/arm/dts/omap5-board-common.dtsi | 4 +- arch/arm/dts/omap5-core-thermal.dtsi | 7 +- arch/arm/dts/omap5-gpu-thermal.dtsi | 7 +- arch/arm/dts/omap5-l4.dtsi | 8 +- arch/arm/dts/omap5-uevm.dts | 4 +- arch/arm/dts/omap5.dtsi | 2 +- arch/arm/dts/omap54xx-clocks.dtsi | 2 +- 135 files changed, 2065 insertions(+), 2323 deletions(-)
Signature · 1 line
2.39.2
PATCH 2/17 arm: dts: am43x: Update devicetree header comments to sync with v6.3-rc6
--- arch/arm/dts/am4372.dtsi | 7 ++----- arch/arm/dts/am437x-gp-evm.dts | 7 ++----- arch/arm/dts/am437x-idk-evm.dts | 7 ++----- arch/arm/dts/am437x-sk-evm.dts | 7 ++----- arch/arm/dts/am43x-epos-evm.dts | 7 ++----- arch/arm/dts/am43xx-clocks.dtsi | 5 +---- 6 files changed, 11 insertions(+), 29 deletions(-)
arch/arm/dts/am4372.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for AM4372 SoC * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/gpio/gpio.h>
arch/arm/dts/am437x-gp-evm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /* AM437x GP EVM */
arch/arm/dts/am437x-idk-evm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/am437x-sk-evm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ */ /* AM437x SK EVM */
arch/arm/dts/am43x-epos-evm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /* AM43x EPOS EVM */
arch/arm/dts/am43xx-clocks.dtsi +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for AM43xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &scm_clocks { sys_clkin_ck: sys_clkin_ck {
Signature · 1 line
2.39.2
PATCH 7/17 arm: dts: omap4x: Update devicetree header comments to sync with v6.3-rc6
In reply to Andrew Davis--- arch/arm/dts/omap4-cpu-thermal.dtsi | 7 ++----- arch/arm/dts/omap4-panda-common.dtsi | 2 +- arch/arm/dts/omap4-panda-es.dts | 2 +- arch/arm/dts/omap4-panda.dts | 2 +- arch/arm/dts/omap4-sdp-es23plus.dts | 2 +- arch/arm/dts/omap4-sdp.dts | 2 +- arch/arm/dts/omap4.dtsi | 2 +- arch/arm/dts/omap443x-clocks.dtsi | 1 + arch/arm/dts/omap443x.dtsi | 7 ++----- arch/arm/dts/omap4460.dtsi | 7 ++----- 10 files changed, 13 insertions(+), 21 deletions(-)
arch/arm/dts/omap4-cpu-thermal.dtsi +2 -5
@@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP4/5 SoC CPU thermal * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * Contact: Eduardo Valentin <[email protected]> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/thermal/thermal.h>
arch/arm/dts/omap4-panda-common.dtsi +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/input/input.h> #include "elpida_ecb240abacn.dtsi"
arch/arm/dts/omap4-panda-es.dts +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/omap4-panda.dts +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/omap4-sdp-es23plus.dts +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ #include "omap4-sdp.dts"
arch/arm/dts/omap4-sdp.dts +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/omap4.dtsi +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/bus/ti-sysc.h>
arch/arm/dts/omap443x-clocks.dtsi +1 -0
@@ -8,6 +8,7 @@ bandgap_fclk: bandgap_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "bandgap_fclk"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x1888>;
arch/arm/dts/omap443x.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP443x SoC * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ #include "omap4.dtsi"
arch/arm/dts/omap4460.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP4460 SoC * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ #include "omap4.dtsi"
Signature · 1 line
2.39.2
PATCH 1/17 arm: dts: am3x: Update devicetree header comments to sync with v6.3-rc6
In reply to Andrew Davis--- arch/arm/dts/am335x-base0033.dts | 5 +---- arch/arm/dts/am335x-chiliboard.dts | 7 ++----- arch/arm/dts/am335x-chilisom.dtsi | 7 ++----- arch/arm/dts/am335x-evm.dts | 7 ++----- arch/arm/dts/am335x-evmsk.dts | 7 ++----- arch/arm/dts/am335x-guardian.dts | 2 +- arch/arm/dts/am335x-icev2.dts | 7 ++----- arch/arm/dts/am335x-igep0033.dtsi | 5 +---- arch/arm/dts/am335x-osd335x-common.dtsi | 2 +- arch/arm/dts/am335x-pdu001.dts | 2 +- arch/arm/dts/am335x-phycore-som.dtsi | 6 +----- arch/arm/dts/am335x-pocketbeagle.dts | 2 +- arch/arm/dts/am335x-sl50.dts | 5 +---- arch/arm/dts/am335x-wega-rdk.dts | 6 +----- arch/arm/dts/am335x-wega.dtsi | 6 +----- arch/arm/dts/am33xx-clocks.dtsi | 5 +---- arch/arm/dts/am33xx.dtsi | 7 ++----- arch/arm/dts/am3517.dtsi | 7 ++----- arch/arm/dts/am35xx-clocks.dtsi | 5 +---- 19 files changed, 26 insertions(+), 74 deletions(-)
arch/arm/dts/am335x-base0033.dts +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION * * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am335x-igep0033.dtsi"
arch/arm/dts/am335x-chiliboard.dts +2 -5
@@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ + * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/ * Author: Rostislav Lisovy <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; #include "am335x-chilisom.dtsi"
arch/arm/dts/am335x-chilisom.dtsi +2 -5
@@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ + * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/ * Author: Rostislav Lisovy <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am33xx.dtsi" #include <dt-bindings/interrupt-controller/irq.h>
arch/arm/dts/am335x-evm.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/am335x-evmsk.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /*
arch/arm/dts/am335x-guardian.dts +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * Copyright (C) 2018 Robert Bosch Power Tools GmbH */ /dts-v1/;
arch/arm/dts/am335x-icev2.dts +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ /*
arch/arm/dts/am335x-igep0033.dtsi +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x * * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/;
arch/arm/dts/am335x-osd335x-common.dtsi +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * Author: Robert Nelson <[email protected]> */
arch/arm/dts/am335x-pdu001.dts +1 -1
@@ -5,7 +5,7 @@ * * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/ * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/ * * SPDX-License-Identifier: GPL-2.0+ */
arch/arm/dts/am335x-phycore-som.dtsi +1 -5
@@ -1,11 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Phytec Messtechnik GmbH * Author: Teresa Remmet <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am33xx.dtsi"
arch/arm/dts/am335x-pocketbeagle.dts +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * Author: Robert Nelson <[email protected]> */
arch/arm/dts/am335x-sl50.dts +1 -4
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/;
arch/arm/dts/am335x-wega-rdk.dts +1 -5
@@ -1,11 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Phytec Messtechnik GmbH * Author: Teresa Remmet <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/;
arch/arm/dts/am335x-wega.dtsi +1 -5
@@ -1,11 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Phytec Messtechnik GmbH * Author: Teresa Remmet <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / {
arch/arm/dts/am33xx-clocks.dtsi +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for AM33xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &scm_clocks { sys_clkin_ck: sys_clkin_ck@40 {
arch/arm/dts/am33xx.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for AM33XX SoC * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/bus/ti-sysc.h>
arch/arm/dts/am3517.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for am3517 SoC * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ #include "omap3.dtsi"
arch/arm/dts/am35xx-clocks.dtsi +1 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3 clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &scm_clocks { emac_ick: emac_ick@32c {
Signature · 1 line
2.39.2
PATCH 9/17 arm: dts: keystone: Update devicetree header comments to sync with v6.3-rc6
In reply to Andrew Davis--- arch/arm/dts/keystone-clocks.dtsi | 7 ++----- arch/arm/dts/keystone-k2e-clocks.dtsi | 7 ++----- arch/arm/dts/keystone-k2e-evm.dts | 7 ++----- arch/arm/dts/keystone-k2e-netcp.dtsi | 7 ++----- arch/arm/dts/keystone-k2e.dtsi | 7 ++----- arch/arm/dts/keystone-k2g-evm.dts | 7 ++----- arch/arm/dts/keystone-k2g-ice.dts | 2 +- arch/arm/dts/keystone-k2g-netcp.dtsi | 7 ++----- arch/arm/dts/keystone-k2g.dtsi | 7 ++----- arch/arm/dts/keystone-k2hk-clocks.dtsi | 7 ++----- arch/arm/dts/keystone-k2hk-evm.dts | 7 ++----- arch/arm/dts/keystone-k2hk-netcp.dtsi | 7 ++----- arch/arm/dts/keystone-k2hk.dtsi | 7 ++----- arch/arm/dts/keystone-k2l-clocks.dtsi | 7 ++----- arch/arm/dts/keystone-k2l-evm.dts | 7 ++----- arch/arm/dts/keystone-k2l-netcp.dtsi | 7 ++----- arch/arm/dts/keystone-k2l.dtsi | 7 ++----- arch/arm/dts/keystone.dtsi | 7 ++----- 18 files changed, 35 insertions(+), 86 deletions(-)
arch/arm/dts/keystone-clocks.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Keystone 2 clock tree * - * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ clocks {
arch/arm/dts/keystone-k2e-clocks.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2014 Texas Instruments, Inc. - * * Keystone 2 Edison SoC specific device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ */ clocks {
arch/arm/dts/keystone-k2e-evm.dts +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 Edison EVM device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ /dts-v1/;
arch/arm/dts/keystone-k2e-netcp.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Keystone 2 Edison Netcp driver * - * Copyright 2015 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ */ qmss: qmss@2a40000 {
arch/arm/dts/keystone-k2e.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 Edison soc device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ / {
arch/arm/dts/keystone-k2g-evm.dts +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2014 Texas Instruments, Inc. - * * Device Tree Source for K2G EVM * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ */ /dts-v1/;
arch/arm/dts/keystone-k2g-ice.dts +1 -1
@@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for K2G Industrial Communication Engine EVM *
arch/arm/dts/keystone-k2g-netcp.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for K2G Netcp driver * - * Copyright 2015 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ */ qmss: qmss@4020000 {
arch/arm/dts/keystone-k2g.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2014 Texas Instruments, Inc. - * * Device Tree Source for K2G SOC * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ */ #include <dt-bindings/interrupt-controller/arm-gic.h>
arch/arm/dts/keystone-k2hk-clocks.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 Kepler/Hawking SoC clock nodes * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ clocks {
arch/arm/dts/keystone-k2hk-evm.dts +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 Kepler/Hawking EVM device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ /dts-v1/;
arch/arm/dts/keystone-k2hk-netcp.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Keystone 2 Hawking Netcp driver * - * Copyright 2015 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ */ qmss: qmss@2a40000 {
arch/arm/dts/keystone-k2hk.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 Kepler/Hawking soc specific device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ / {
arch/arm/dts/keystone-k2l-clocks.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 lamarr SoC clock nodes * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ clocks {
arch/arm/dts/keystone-k2l-evm.dts +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2014 Texas Instruments, Inc. - * * Keystone 2 Lamarr EVM device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ */ /dts-v1/;
arch/arm/dts/keystone-k2l-netcp.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Keystone 2 Lamarr Netcp driver * - * Copyright 2015 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ */ qmss: qmss@2a40000 {
arch/arm/dts/keystone-k2l.dtsi +2 -5
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2014 Texas Instruments, Inc. - * * Keystone 2 Lamarr SoC specific device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ */ / {
arch/arm/dts/keystone.dtsi +2 -5
@@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ #include <dt-bindings/interrupt-controller/arm-gic.h>
Signature · 1 line
2.39.2
PATCH 17/17 Revert "arm: dts: dra7*/am57xx-idk-evm-u-boot: Add ipu early boot DT changes"
In reply to Andrew DavisThis reverts commit 5717294230bc3578959960003be8984bbbb33642. This does not exist in upstream kernel.org and breaks boot on DRA7-EVMs. Drop the same.
--- arch/arm/dts/am57xx-idk-common-u-boot.dtsi | 1 - arch/arm/dts/dra7-evm-u-boot.dtsi | 1 - arch/arm/dts/dra71-evm-u-boot.dtsi | 1 - arch/arm/dts/dra72-evm-revc-u-boot.dtsi | 1 - arch/arm/dts/dra76-evm-u-boot.dtsi | 1 - 5 files changed, 5 deletions(-)
arch/arm/dts/am57xx-idk-common-u-boot.dtsi +0 -1
@@ -3,7 +3,6 @@ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ */ #include "omap5-u-boot.dtsi" -#include "dra7-ipu-common-early-boot.dtsi" / { xtal25mhz: xtal25mhz {
arch/arm/dts/dra7-evm-u-boot.dtsi +0 -1
@@ -4,7 +4,6 @@ */ #include "omap5-u-boot.dtsi" -#include "dra7-ipu-common-early-boot.dtsi" &pcf_gpio_21{ u-boot,i2c-offset-len = <0>;
arch/arm/dts/dra71-evm-u-boot.dtsi +0 -1
@@ -4,7 +4,6 @@ */ #include "omap5-u-boot.dtsi" -#include "dra7-ipu-common-early-boot.dtsi" &pcf_gpio_21{ u-boot,i2c-offset-len = <0>;
arch/arm/dts/dra72-evm-revc-u-boot.dtsi +0 -1
@@ -4,7 +4,6 @@ */ #include "omap5-u-boot.dtsi" -#include "dra7-ipu-common-early-boot.dtsi" &pcf_gpio_21{ u-boot,i2c-offset-len = <0>;
arch/arm/dts/dra76-evm-u-boot.dtsi +0 -1
@@ -4,7 +4,6 @@ */ #include "omap5-u-boot.dtsi" -#include "dra7-ipu-common-early-boot.dtsi" &cpsw_emac0 { phy-handle = <&dp83867_0>;
Signature · 1 line
2.39.2
PATCH 8/17 arm: dts: omap5x: Update devicetree header comments to sync with v6.3-rc6
In reply to Andrew Davis--- arch/arm/dts/omap5-board-common.dtsi | 2 +- arch/arm/dts/omap5-core-thermal.dtsi | 7 ++----- arch/arm/dts/omap5-gpu-thermal.dtsi | 7 ++----- arch/arm/dts/omap5-uevm.dts | 2 +- arch/arm/dts/omap5.dtsi | 2 +- 5 files changed, 7 insertions(+), 13 deletions(-)
arch/arm/dts/omap5-board-common.dtsi +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ #include "omap5.dtsi" #include <dt-bindings/interrupt-controller/irq.h>
arch/arm/dts/omap5-core-thermal.dtsi +2 -5
@@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP543x SoC CORE thermal * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * Contact: Eduardo Valentin <[email protected]> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/thermal/thermal.h>
arch/arm/dts/omap5-gpu-thermal.dtsi +2 -5
@@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP543x SoC GPU thermal * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * Contact: Eduardo Valentin <[email protected]> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/thermal/thermal.h>
arch/arm/dts/omap5-uevm.dts +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/;
arch/arm/dts/omap5.dtsi +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * Based on "omap4.dtsi" */
Signature · 1 line
2.39.2
PATCH 14/17 arm: dts: dm8x: Non-functional changes sync with v6.3-rc6
In reply to Andrew DavisThis is a collection of all the whitespace, renames, comment, and other changes that should not change the DT functionality from Linux v6.3-rc6.
--- arch/arm/dts/da850-evm.dts | 20 ++++++++++---------- arch/arm/dts/da850-lego-ev3.dts | 2 +- arch/arm/dts/da850.dtsi | 18 +++++++++--------- arch/arm/dts/dm8168-evm.dts | 10 +++++----- arch/arm/dts/dm816x.dtsi | 17 ++++++++++++----- 5 files changed, 37 insertions(+), 30 deletions(-)
arch/arm/dts/da850-evm.dts +10 -10
@@ -52,15 +52,15 @@ enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */ panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <16>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; }; display-timings {
@@ -265,7 +265,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64";
arch/arm/dts/da850-lego-ev3.dts +1 -1
@@ -22,7 +22,7 @@ stdout-path = &serial1; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x04000000>; };
arch/arm/dts/da850.dtsi +9 -9
@@ -369,7 +369,7 @@ edma0: edma@0 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */ - reg = <0x0 0x8000>; + reg = <0x0 0x8000>; reg-names = "edma3_cc"; interrupts = <11 12>; interrupt-names = "edma3_ccint", "edma3_ccerrint";
@@ -380,14 +380,14 @@ }; edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; - reg = <0x8000 0x400>; + reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc0 1>; }; edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; - reg = <0x8400 0x400>; + reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc0 2>;
@@ -395,7 +395,7 @@ edma1: edma@230000 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */ - reg = <0x230000 0x8000>; + reg = <0x230000 0x8000>; reg-names = "edma3_cc"; interrupts = <93 94>; interrupt-names = "edma3_ccint", "edma3_ccerrint";
@@ -406,7 +406,7 @@ }; edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; - reg = <0x238000 0x400>; + reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc1 21>;
@@ -543,7 +543,7 @@ power-domains = <&psc1 17>; status = "disabled"; }; - ecap0: ecap@306000 { + ecap0: pwm@306000 { compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>;
@@ -553,7 +553,7 @@ power-domains = <&psc1 20>; status = "disabled"; }; - ecap1: ecap@307000 { + ecap1: pwm@307000 { compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>;
@@ -563,7 +563,7 @@ power-domains = <&psc1 20>; status = "disabled"; }; - ecap2: ecap@308000 { + ecap2: pwm@308000 { compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>;
@@ -627,7 +627,7 @@ cppi41dma: dma-controller@201000 { compatible = "ti,da830-cppi41"; - reg = <0x201000 0x1000 + reg = <0x201000 0x1000 0x202000 0x1000 0x204000 0x4000>; reg-names = "controller",
arch/arm/dts/dm8168-evm.dts +5 -5
@@ -116,19 +116,19 @@ label = "X-Loader"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "U-Boot"; reg = <0x80000 0x1c0000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "Environment"; reg = <0x240000 0x40000>; }; - partition@0x280000 { + partition@280000 { label = "Kernel"; reg = <0x280000 0x500000>; }; - partition@0x780000 { + partition@780000 { label = "Filesystem"; reg = <0x780000 0xf880000>; };
@@ -139,7 +139,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - m25p80@0 { + flash@0 { compatible = "w25x32"; spi-max-frequency = <48000000>; reg = <0>;
arch/arm/dts/dm816x.dtsi +12 -5
@@ -63,8 +63,11 @@ ranges; prcm: prcm@48180000 { - compatible = "ti,dm816-prcm"; + compatible = "ti,dm816-prcm", "simple-bus"; reg = <0x48180000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48180000 0x4000>; prcm_clocks: clocks { #address-cells = <1>;
@@ -86,6 +89,8 @@ dm816x_pinmux: pinmux@800 { compatible = "pinctrl-single"; reg = <0x800 0x50a>; + #address-cells = <1>; + #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xf>;
@@ -121,6 +126,8 @@ }; scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; }; scrm_clockdomains: clockdomains {
@@ -228,7 +235,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; - mbox_dsp: mbox_dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <3 0 0>; ti,mbox-rx = <0 0 0>; };
@@ -364,7 +371,7 @@ ti,timer-pwm; }; - uart1: uart@48020000 { + uart1: serial@48020000 { compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x48020000 0x2000>;
@@ -374,7 +381,7 @@ dma-names = "tx", "rx"; }; - uart2: uart@48022000 { + uart2: serial@48022000 { compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x48022000 0x2000>;
@@ -384,7 +391,7 @@ dma-names = "tx", "rx"; }; - uart3: uart@48024000 { + uart3: serial@48024000 { compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x48024000 0x2000>;
Signature · 1 line
2.39.2
PATCH 15/17 arm: dts: omap: Non-functional changes sync with v6.3-rc6
In reply to Andrew DavisThis is a collection of all the whitespace, renames, comment, and other changes that should not change the DT functionality from Linux v6.3-rc6.
--- arch/arm/dts/omap-gpmc-smsc911x.dtsi | 6 ++-- arch/arm/dts/omap-gpmc-smsc9221.dtsi | 6 ++-- arch/arm/dts/omap3-beagle-xm.dts | 12 +++---- arch/arm/dts/omap3-beagle.dts | 6 ++-- arch/arm/dts/omap3-cpu-thermal.dtsi | 2 +- arch/arm/dts/omap3-evm-37xx.dts | 2 +- arch/arm/dts/omap3-evm-processor-common.dtsi | 2 +- arch/arm/dts/omap3-evm.dts | 2 +- arch/arm/dts/omap3-igep.dtsi | 2 +- arch/arm/dts/omap3.dtsi | 2 +- arch/arm/dts/omap4-cpu-thermal.dtsi | 24 ++++++------- arch/arm/dts/omap4-l4.dtsi | 4 +-- arch/arm/dts/omap4-panda-common.dtsi | 6 ++-- arch/arm/dts/omap4-panda-es.dts | 4 +-- arch/arm/dts/omap4-sdp.dts | 36 +++++++++++--------- arch/arm/dts/omap4.dtsi | 10 ++++-- arch/arm/dts/omap5-board-common.dtsi | 2 +- arch/arm/dts/omap5-l4.dtsi | 8 ++--- arch/arm/dts/omap5-uevm.dts | 2 +- arch/arm/dts/omap54xx-clocks.dtsi | 2 +- 20 files changed, 75 insertions(+), 65 deletions(-)
arch/arm/dts/omap-gpmc-smsc911x.dtsi +3 -3
@@ -8,9 +8,9 @@ / { vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; }; vdd33a: regulator-vdd33a {
arch/arm/dts/omap-gpmc-smsc9221.dtsi +3 -3
@@ -12,9 +12,9 @@ / { vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; }; vdd33a: regulator-vdd33a {
arch/arm/dts/omap3-beagle-xm.dts +6 -6
@@ -27,26 +27,26 @@ ethernet = ðernet; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - heartbeat { + led-1 { label = "beagleboard::usr0"; gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ linux,default-trigger = "heartbeat"; }; - mmc { + led-2 { label = "beagleboard::usr1"; gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ linux,default-trigger = "mmc0"; }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - pmu_stat { + led-3 { label = "beagleboard::pmu_stat"; pwms = <&twl_pwmled 1 7812500>; max-brightness = <127>;
@@ -357,7 +357,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; };
arch/arm/dts/omap3-beagle.dts +3 -3
@@ -28,18 +28,18 @@ leds { compatible = "gpio-leds"; - pmu_stat { + led-pmu-stat { label = "beagleboard::pmu_stat"; gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ }; - heartbeat { + led-heartbeat { label = "beagleboard::usr0"; gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ linux,default-trigger = "heartbeat"; }; - mmc { + led-mmc { label = "beagleboard::usr1"; gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ linux,default-trigger = "mmc0";
arch/arm/dts/omap3-cpu-thermal.dtsi +1 -1
@@ -7,7 +7,7 @@ #include <dt-bindings/thermal/thermal.h> -cpu_thermal: cpu_thermal { +cpu_thermal: cpu-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ coefficients = <0 20000>;
arch/arm/dts/omap3-evm-37xx.dts +1 -1
@@ -60,7 +60,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "hynix,h8kds0un0mer-4em"; + linux,mtd-name = "hynix,h8kds0un0mer-4em"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8";
arch/arm/dts/omap3-evm-processor-common.dtsi +1 -1
@@ -195,7 +195,7 @@ * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. */ &gpio2 { - en_usb2_port { + en-usb2-port-hog { gpio-hog; gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ output-low;
arch/arm/dts/omap3-evm.dts +1 -1
@@ -60,7 +60,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29f2g16abdhc"; + linux,mtd-name = "micron,mt29f2g16abdhc"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8";
arch/arm/dts/omap3-igep.dtsi +1 -1
@@ -111,7 +111,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29c4g96maz"; + linux,mtd-name = "micron,mt29c4g96maz"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8";
arch/arm/dts/omap3.dtsi +1 -1
@@ -353,7 +353,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <2>; ti,mbox-num-fifos = <2>; - mbox_dsp: dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <0 0 0>; ti,mbox-rx = <1 0 0>; };
arch/arm/dts/omap4-cpu-thermal.dtsi +12 -12
@@ -13,20 +13,20 @@ cpu_thermal: cpu_thermal { polling-delay = <1000>; /* milliseconds */ /* sensor ID */ - thermal-sensors = <&bandgap 0>; + thermal-sensors = <&bandgap 0>; cpu_trips: trips { - cpu_alert0: cpu_alert { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <125000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; + cpu_alert0: cpu_alert { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <125000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; cpu_cooling_maps: cooling-maps { map0 {
arch/arm/dts/omap4-l4.dtsi +2 -2
@@ -599,11 +599,11 @@ #mbox-cells = <1>; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { + mbox_ipu: mbox-ipu { ti,mbox-tx = <0 0 0>; ti,mbox-rx = <1 0 0>; }; - mbox_dsp: mbox_dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <3 0 0>; ti,mbox-rx = <2 0 0>; };
arch/arm/dts/omap4-panda-common.dtsi +3 -3
@@ -29,13 +29,13 @@ &led_wkgpio_pins >; - heartbeat { + led-heartbeat { label = "pandaboard::status1"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - mmc { + led-mmc { label = "pandaboard::status2"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0";
@@ -538,7 +538,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; };
arch/arm/dts/omap4-panda-es.dts +2 -2
@@ -63,10 +63,10 @@ &led_wkgpio_pins >; - heartbeat { + led-heartbeat { gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; }; - mmc { + led-mmc { gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; };
arch/arm/dts/omap4-sdp.dts +20 -16
@@ -45,58 +45,60 @@ regulator-boot-on; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - debug0 { + + led-1 { label = "omap4:green:debug0"; gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */ }; - debug1 { + led-2 { label = "omap4:green:debug1"; gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */ }; - debug2 { + led-3 { label = "omap4:green:debug2"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */ }; - debug3 { + led-4 { label = "omap4:green:debug3"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */ }; - debug4 { + led-5 { label = "omap4:green:debug4"; gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */ }; - user1 { + led-6 { label = "omap4:blue:user"; gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */ }; - user2 { + led-7 { label = "omap4:red:user"; gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */ }; - user3 { + led-8 { label = "omap4:green:user"; gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */ }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - kpad { + + led-9 { label = "omap4::keypad"; pwms = <&twl_pwm 0 7812500>; max-brightness = <127>; }; - charging { + led-10 { label = "omap4:green:chrg"; pwms = <&twl_pwmled 0 7812500>; max-brightness = <255>;
@@ -428,7 +430,7 @@ /* * Temperature Sensor - * http://www.ti.com/lit/ds/symlink/tmp105.pdf + * https://www.ti.com/lit/ds/symlink/tmp105.pdf */ tmp105@48 { compatible = "ti,tmp105";
@@ -453,7 +455,7 @@ /* * 3-Axis Digital Compass - * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf + * https://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf */ hmc5843@1e { compatible = "honeywell,hmc5843";
@@ -662,8 +664,9 @@ }; }; - lcd0: display { + lcd0: panel@0 { compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; label = "lcd0"; reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
@@ -687,8 +690,9 @@ }; }; - lcd1: display { + lcd1: panel@0 { compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; label = "lcd1"; reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
arch/arm/dts/omap4.dtsi +8 -2
@@ -71,7 +71,7 @@ interrupt-parent = <&gic>; }; - L2: l2-cache-controller@48242000 { + L2: cache-controller@48242000 { compatible = "arm,pl310-cache"; reg = <0x48242000 0x1000>; cache-unified;
@@ -389,7 +389,7 @@ status = "disabled"; }; - target-module@56000000 { + sgx_module: target-module@56000000 { compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x5600fe00 0x4>, <0x5600fe10 0x4>;
@@ -551,6 +551,9 @@ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; };
@@ -583,6 +586,9 @@ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; };
arch/arm/dts/omap5-board-common.dtsi +1 -1
@@ -149,7 +149,7 @@ &gpio8 { /* TI trees use GPIO instead of msecure, see also muxing */ - p234 { + msecure-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>; output-high;
arch/arm/dts/omap5-l4.dtsi +4 -4
@@ -195,7 +195,7 @@ #size-cells = <1>; utmi-mode = <2>; ranges = <0 0 0x20000>; - dwc3: dwc3@10000 { + dwc3: usb@10000 { compatible = "snps,dwc3"; reg = <0x10000 0x10000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
@@ -482,7 +482,7 @@ clocks = <&usb_phy_cm_clk32k>, <&sys_clkin>, <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; - clock-names = "wkupclk", + clock-names = "wkupclk", "sysclk", "refclk"; #phy-cells = <0>;
@@ -616,11 +616,11 @@ #mbox-cells = <1>; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { + mbox_ipu: mbox-ipu { ti,mbox-tx = <0 0 0>; ti,mbox-rx = <1 0 0>; }; - mbox_dsp: mbox_dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <3 0 0>; ti,mbox-rx = <2 0 0>; };
arch/arm/dts/omap5-uevm.dts +1 -1
@@ -189,7 +189,7 @@ #size-cells = <0>; }; - ethernet: usbether@3 { + ethernet: ethernet@3 { compatible = "usb424,9730"; reg = <3>; };
arch/arm/dts/omap54xx-clocks.dtsi +1 -1
@@ -1118,7 +1118,7 @@ }; }; - l4per_cm: l4per_cm@1000 { + l4per_cm: clock@1000 { compatible = "ti,omap4-cm"; reg = <0x1000 0x200>; #address-cells = <1>;
Signature · 1 line
2.39.2
PATCH 12/17 arm: dts: am3x: Non-functional changes sync with v6.3-rc6
In reply to Andrew DavisThis is a collection of all the whitespace, renames, comment, and other changes that should not change the DT functionality from Linux v6.3-rc6.
--- arch/arm/dts/am335x-bone-common.dtsi | 1 - arch/arm/dts/am335x-boneblack-hdmi.dtsi | 7 +- arch/arm/dts/am335x-boneblack-wireless.dts | 2 +- arch/arm/dts/am335x-boneblack.dts | 4 + arch/arm/dts/am335x-boneblue.dts | 2 +- arch/arm/dts/am335x-bonegreen-wireless.dts | 2 +- arch/arm/dts/am335x-evm.dts | 46 ++--- arch/arm/dts/am335x-evmsk.dts | 36 ++-- arch/arm/dts/am335x-guardian.dts | 10 +- arch/arm/dts/am335x-icev2.dts | 143 +++++++-------- arch/arm/dts/am335x-igep0033.dtsi | 4 +- arch/arm/dts/am335x-pdu001.dts | 2 +- arch/arm/dts/am335x-phycore-som.dtsi | 20 +-- arch/arm/dts/am335x-pocketbeagle.dts | 8 +- arch/arm/dts/am335x-pxm2.dtsi | 2 +- arch/arm/dts/am335x-rut.dts | 2 +- .../dts/am335x-sancloud-bbe-extended-wifi.dts | 2 +- arch/arm/dts/am335x-shc.dts | 14 +- arch/arm/dts/am335x-sl50.dts | 14 +- arch/arm/dts/am335x-wega.dtsi | 16 +- arch/arm/dts/am33xx-clocks.dtsi | 164 +++++++++--------- arch/arm/dts/am33xx-l4.dtsi | 10 +- arch/arm/dts/am33xx.dtsi | 12 +- arch/arm/dts/am3517-evm-ui.dtsi | 28 +-- arch/arm/dts/am3517-evm.dts | 36 ++-- arch/arm/dts/am3517.dtsi | 2 +- 26 files changed, 298 insertions(+), 291 deletions(-)
arch/arm/dts/am335x-bone-common.dtsi +0 -1
@@ -371,7 +371,6 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>;
arch/arm/dts/am335x-boneblack-hdmi.dtsi +6 -1
@@ -85,8 +85,13 @@ audio-ports = < TDA998x_I2S 0x03>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { - hdmi_0: endpoint@0 { + reg = <0>; + + hdmi_0: endpoint { remote-endpoint = <&lcdc_0>; }; };
arch/arm/dts/am335x-boneblack-wireless.dts +1 -1
@@ -19,7 +19,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - startup-delay-us= <70000>; + startup-delay-us = <70000>; /* WL_EN */ gpio = <&gpio3 9 0>;
arch/arm/dts/am335x-boneblack.dts +4 -0
@@ -168,3 +168,7 @@ "NC", "NC"; }; + +&baseboard_eeprom { + vcc-supply = <&ldo4_reg>; +};
arch/arm/dts/am335x-boneblue.dts +1 -1
@@ -107,7 +107,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - startup-delay-us= <70000>; + startup-delay-us = <70000>; /* WL_EN */ gpio = <&gpio3 9 0>;
arch/arm/dts/am335x-bonegreen-wireless.dts +1 -1
@@ -18,7 +18,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - startup-delay-us= <70000>; + startup-delay-us = <70000>; /* WL_EN */ gpio = <&gpio0 26 0>;
arch/arm/dts/am335x-evm.dts +25 -21
108 lines not on this page · raw message
arch/arm/dts/am335x-evmsk.dts +19 -17
@@ -29,12 +29,12 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>;
@@ -42,13 +42,13 @@ regulator-boot-on; }; - lis3_reg: fixedregulator@1 { + lis3_reg: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "lis3_reg"; regulator-boot-on; }; - wl12xx_vmmc: fixedregulator@2 { + wl12xx_vmmc: fixedregulator2 { pinctrl-names = "default"; pinctrl-0 = <&wl12xx_gpio>; compatible = "regulator-fixed";
@@ -60,7 +60,7 @@ enable-active-high; }; - vtt_fixed: fixedregulator@3 { + vtt_fixed: fixedregulator3 { compatible = "regulator-fixed"; regulator-name = "vtt"; regulator-min-microvolt = <1500000>;
@@ -77,26 +77,26 @@ compatible = "gpio-leds"; - led@1 { + led1 { label = "evmsk:green:usr0"; gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led2 { label = "evmsk:green:usr1"; gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@3 { + led3 { label = "evmsk:green:mmc0"; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@4 { + led4 { label = "evmsk:green:heartbeat"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat";
@@ -104,36 +104,38 @@ }; }; - gpio_buttons: gpio_buttons@0 { + gpio_buttons: gpio_buttons0 { compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; - switch@1 { + switch1 { label = "button0"; linux,code = <0x100>; gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; }; - switch@2 { + switch2 { label = "button1"; linux,code = <0x101>; gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; }; - switch@3 { + switch3 { label = "button2"; linux,code = <0x102>; gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; wakeup-source; }; - switch@4 { + switch4 { label = "button3"; linux,code = <0x103>; gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; }; }; - backlight { + lcd_bl: backlight { compatible = "pwm-backlight"; pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 58 61 66 75 90 125 170 255>;
@@ -528,7 +530,7 @@ &epwmss2 { status = "okay"; - ecap2: ecap@100 { + ecap2: pwm@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap2_pins>;
@@ -719,7 +721,7 @@ }; &lcdc { - status = "okay"; + status = "okay"; }; &rtc {
arch/arm/dts/am335x-guardian.dts +5 -5
@@ -29,10 +29,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - gpio_keys { - compatible = "gpio-keys"; + guardian_buttons: gpio-keys { pinctrl-names = "default"; pinctrl-0 = <&guardian_button_pins>; + compatible = "gpio-keys"; select-button { label = "guardian-select-button";
@@ -49,10 +49,10 @@ }; }; - leds { - compatible = "gpio-leds"; + guardian_leds: gpio-leds { pinctrl-names = "default"; pinctrl-0 = <&guardian_led_pins>; + compatible = "gpio-leds"; life-led { label = "guardian:life-led";
@@ -98,7 +98,7 @@ }; - pwm7: dmtimer-pwm { + pwm7: pwm-7 { compatible = "ti,omap-dmtimer-pwm"; ti,timers = <&timer7>; pinctrl-names = "default";
arch/arm/dts/am335x-icev2.dts +72 -71
261 lines not on this page · raw message
arch/arm/dts/am335x-igep0033.dtsi +2 -2
@@ -171,7 +171,7 @@ /* MTD partition table */ partition@0 { label = "SPL"; - reg = <0x00000000 0x000080000>; + reg = <0x00000000 0x00080000>; }; partition@1 {
@@ -191,7 +191,7 @@ partition@4 { label = "File System"; - reg = <0x00780000 0x007880000>; + reg = <0x00780000 0x07880000>; }; }; };
arch/arm/dts/am335x-pdu001.dts +1 -1
@@ -353,7 +353,7 @@ }; }; - mcp79400: mcp79400@6f { + mcp79400: rtc@6f { compatible = "microchip,mcp7940x"; reg = <0x6f>; };
arch/arm/dts/am335x-phycore-som.dtsi +8 -12
@@ -27,17 +27,13 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - regulators { - compatible = "simple-bus"; - - vcc5v: fixedregulator0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - }; + vcc5v: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; }; };
@@ -306,7 +302,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - serial_flash: m25p80@0 { + serial_flash: flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <48000000>; reg = <0x0>;
arch/arm/dts/am335x-pocketbeagle.dts +4 -4
@@ -23,28 +23,28 @@ compatible = "gpio-leds"; - usr0 { + led-usr0 { label = "beaglebone:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; - usr1 { + led-usr1 { label = "beaglebone:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; - usr2 { + led-usr2 { label = "beaglebone:green:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; linux,default-trigger = "cpu0"; default-state = "off"; }; - usr3 { + led-usr3 { label = "beaglebone:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; default-state = "off";
arch/arm/dts/am335x-pxm2.dtsi +1 -1
@@ -148,7 +148,7 @@ &epwmss0 { status = "okay"; - ecap0: ecap@100 { + ecap0: pwm@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins>;
arch/arm/dts/am335x-rut.dts +1 -1
@@ -174,7 +174,7 @@ &epwmss0 { status = "okay"; - ecap0: ecap@100 { + ecap0: pwm@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins>;
arch/arm/dts/am335x-sancloud-bbe-extended-wifi.dts +1 -1
@@ -23,7 +23,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - startup-delay-us= <100000>; + startup-delay-us = <100000>; }; };
arch/arm/dts/am335x-shc.dts +7 -7
@@ -36,10 +36,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - back_button { + back-button { label = "Back Button"; gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; linux,code = <KEY_BACK>;
@@ -47,7 +47,7 @@ wakeup-source; }; - front_button { + front-button { label = "Front Button"; gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; linux,code = <KEY_FRONT>;
@@ -144,14 +144,14 @@ }; &gpio1 { - hmtc_rst { + hmtc-rst-hog { gpio-hog; gpios = <24 GPIO_ACTIVE_LOW>; output-high; line-name = "homematic_reset"; }; - hmtc_prog { + hmtc-prog-hog { gpio-hog; gpios = <27 GPIO_ACTIVE_LOW>; output-high;
@@ -160,14 +160,14 @@ }; &gpio3 { - zgb_rst { + zgb-rst-hog { gpio-hog; gpios = <18 GPIO_ACTIVE_LOW>; output-low; line-name = "zigbee_reset"; }; - zgb_boot { + zgb-boot-hog { gpio-hog; gpios = <19 GPIO_ACTIVE_HIGH>; output-high;
arch/arm/dts/am335x-sl50.dts +7 -7
@@ -31,25 +31,25 @@ pinctrl-0 = <&led_pins>; led0 { - label = "sl50:green:usr0"; + label = "sl50:red:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; default-state = "off"; }; led1 { - label = "sl50:red:usr1"; + label = "sl50:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; }; led2 { - label = "sl50:green:usr2"; + label = "sl50:red:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; default-state = "off"; }; led3 { - label = "sl50:red:usr3"; + label = "sl50:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; default-state = "off"; };
@@ -75,7 +75,7 @@ #size-cells = <0>; /* audio external oscillator */ - tlv320aic3x_mclk: oscillator@0 { + audio_mclk_fixed: oscillator@0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; /* 24.576MHz */
@@ -88,7 +88,7 @@ ti,audio-codec = <&audio_codec>; ti,mcasp-controller = <&mcasp0>; - clocks = <&tlv320aic3x_mclk>; + clocks = <&audio_mclk_fixed>; clock-names = "mclk"; ti,audio-routing =
@@ -430,7 +430,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - flash: n25q032@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q032";
arch/arm/dts/am335x-wega.dtsi +6 -10
@@ -12,16 +12,12 @@ compatible = "ti,da830-evm-audio"; }; - regulators { - compatible = "simple-bus"; - - vcc3v3: fixedregulator1 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; + vcc3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; }; };
arch/arm/dts/am33xx-clocks.dtsi +82 -82
639 lines not on this page · raw message
arch/arm/dts/am33xx-l4.dtsi +5 -5
@@ -1327,7 +1327,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; - mbox_wkupm3: wkup_m3 { + mbox_wkupm3: mbox-wkup-m3 { ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>;
@@ -1621,7 +1621,7 @@ }; }; - target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ + target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0xae000 0x4>, <0xae010 0x4>,
@@ -1798,7 +1798,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap0: ecap@100 { + ecap0: pwm@100 { compatible = "ti,am3352-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>;
@@ -1859,7 +1859,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap1: ecap@100 { + ecap1: pwm@100 { compatible = "ti,am3352-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>;
@@ -1920,7 +1920,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap2: ecap@100 { + ecap2: pwm@100 { compatible = "ti,am3352-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>;
arch/arm/dts/am33xx.dtsi +6 -6
@@ -172,7 +172,7 @@ * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ - ocp { + ocp: ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
@@ -322,11 +322,11 @@ ranges = <0x0 0x47810000 0x1000>; mmc3: mmc@0 { - compatible = "ti,am335-sdhci"; - ti,needs-special-reset; - interrupts = <29>; - reg = <0x0 0x1000>; - status = "disabled"; + compatible = "ti,am335-sdhci"; + ti,needs-special-reset; + interrupts = <29>; + reg = <0x0 0x1000>; + status = "disabled"; }; };
arch/arm/dts/am3517-evm-ui.dtsi +14 -14
@@ -70,61 +70,61 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - record { + key-record { label = "Record"; - linux,code = <KEY_RECORD>; + /* linux,code = <BTN_0>; */ gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>; }; - play { + key-play { label = "Play"; linux,code = <KEY_PLAY>; gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>; }; - Stop { + key-stop { label = "Stop"; linux,code = <KEY_STOP>; gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>; }; - fwd { + key-fwd { label = "FWD"; linux,code = <KEY_FASTFORWARD>; gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>; }; - rwd { + key-rwd { label = "RWD"; linux,code = <KEY_REWIND>; gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>; }; - shift { + key-shift { label = "Shift"; linux,code = <KEY_LEFTSHIFT>; gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>; }; - Mode { + key-mode { label = "Mode"; linux,code = <BTN_MODE>; gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>; }; - Menu { + key-menu { label = "Menu"; linux,code = <KEY_MENU>; gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>; }; - Up { + key-up { label = "Up"; linux,code = <KEY_UP>; gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>; }; - Down { + key-down { label = "Down"; linux,code = <KEY_DOWN>; gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
@@ -137,14 +137,14 @@ tlv320aic23_1: codec@1a { compatible = "ti,tlv320aic23"; reg = <0x1a>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; tlv320aic23_2: codec@1b { compatible = "ti,tlv320aic23"; reg = <0x1b>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; };
@@ -154,7 +154,7 @@ tlv320aic23_3: codec@1a { compatible = "ti,tlv320aic23"; reg = <0x1a>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; };
arch/arm/dts/am3517-evm.dts +18 -18
@@ -26,66 +26,66 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vmmc_fixed: vmmc { - compatible = "regulator-fixed"; - regulator-name = "vmmc_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + vmmc_fixed: vmmc { + compatible = "regulator-fixed"; + regulator-name = "vmmc_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; gpio-keys { compatible = "gpio-keys-polled"; poll-interval = <100>; - user_pb { + button-user { label = "User Push Button"; linux,code = <BTN_0>; gpios = <&tca6416 5 GPIO_ACTIVE_LOW>; }; - user_sw_1 { + switch-1 { label = "User Switch 1"; linux,code = <BTN_1>; gpios = <&tca6416 8 GPIO_ACTIVE_LOW>; }; - user_sw_2 { + switch-2 { label = "User Switch 2"; linux,code = <BTN_2>; gpios = <&tca6416 9 GPIO_ACTIVE_LOW>; }; - user_sw_3 { + switch-3 { label = "User Switch 3"; linux,code = <BTN_3>; gpios = <&tca6416 10 GPIO_ACTIVE_LOW>; }; - user_sw_4 { + switch-4 { label = "User Switch 4"; linux,code = <BTN_4>; gpios = <&tca6416 11 GPIO_ACTIVE_LOW>; }; - user_sw_5 { + switch-5 { label = "User Switch 5"; linux,code = <BTN_5>; gpios = <&tca6416 12 GPIO_ACTIVE_LOW>; }; - user_sw_6 { + switch-6 { label = "User Switch 6"; linux,code = <BTN_6>; gpios = <&tca6416 13 GPIO_ACTIVE_LOW>; }; - user_sw_7 { + switch-7 { label = "User Switch 7"; linux,code = <BTN_7>; gpios = <&tca6416 14 GPIO_ACTIVE_LOW>; }; - user_sw_8 { + switch-8 { label = "User Switch 8"; linux,code = <BTN_8>; gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
@@ -150,7 +150,7 @@ enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */ }; - pwm11: dmtimer-pwm@11 { + pwm11: pwm-11 { compatible = "ti,omap-dmtimer-pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm_pins>;
@@ -176,7 +176,7 @@ }; &davinci_mdio { - status = "okay"; + status = "okay"; }; &dss {
@@ -223,7 +223,7 @@ }; &mmc3 { - status = "disabled"; + status = "disabled"; }; &usbhshost {
arch/arm/dts/am3517.dtsi +1 -1
@@ -40,7 +40,7 @@ clock-names = "ick"; }; - davinci_mdio: ethernet@5c030000 { + davinci_mdio: mdio@5c030000 { compatible = "ti,davinci_mdio"; ti,hwmods = "davinci_mdio"; status = "disabled";
Signature · 1 line
2.39.2
PATCH 11/17 arm: dts: am437x: Update to IOPAD to sync with v6.3-rc6
In reply to Andrew DavisSeveral DTS files have been updated in the Linux kernel with a new IOPAD macro. Sync for the same here.
--- arch/arm/dts/am437x-gp-evm.dts | 315 ++++++++++++++++----------------- arch/arm/dts/am437x-sk-evm.dts | 290 +++++++++++++++--------------- 2 files changed, 302 insertions(+), 303 deletions(-)
arch/arm/dts/am437x-gp-evm.dts +157 -158
@@ -135,139 +135,138 @@ i2c0_pins: i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c1_pins: i2c1_pins { pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; ecap0_pins: backlight_pins { pinctrl-single,pins = < - 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ >; }; pixcir_ts_pins: pixcir_ts_pins { pinctrl-single,pins = < - 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ + AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ + AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ + AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ + AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ + AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ + AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ + AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ + AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ + AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; nand_flash_x8: nand_flash_x8 { pinctrl-single,pins = < - 0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */ - 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ + AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; dss_pins: dss_pins { pinctrl-single,pins = < - 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ - 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ - 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ - 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ - 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ - 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ - 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ - 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ + AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ + AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ >; };
@@ -275,140 +274,140 @@ lcd_pins: lcd_pins { pinctrl-single,pins = < /* GPIO 5_8 to select LCD / HDMI */ - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; dcan0_default: dcan0_default_pins { pinctrl-single,pins = < - 0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ - 0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ + AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ + AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ >; }; dcan1_default: dcan1_default_pins { pinctrl-single,pins = < - 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ - 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ + AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ + AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ >; }; vpfe0_pins_default: vpfe0_pins_default { pinctrl-single,pins = < - 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ - 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ - 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ - 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ - 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ - 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ - 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ - 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ - 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ - 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ - 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ - 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ - 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ + AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ + AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ + AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ + AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ + AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ + AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ + AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ + AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ + AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ + AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ + AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ + AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ + AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ >; }; vpfe0_pins_sleep: vpfe0_pins_sleep { pinctrl-single,pins = < - 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ - 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ - 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ - 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ - 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ - 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ - 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ - 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ - 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ - 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ - 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ - 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ - 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ + AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ + AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ + AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ + AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ + AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ + AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ + AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ + AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ + AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ + AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ + AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ + AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ + AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ >; }; vpfe1_pins_default: vpfe1_pins_default { pinctrl-single,pins = < - 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ - 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ - 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ - 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ - 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ - 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ - 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ - 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ - 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ - 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ - 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ - 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ - 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ + AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ + AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ + AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ + AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ + AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ + AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ + AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ + AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ + AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ + AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ + AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ + AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ + AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ >; }; vpfe1_pins_sleep: vpfe1_pins_sleep { pinctrl-single,pins = < - 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ - 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ - 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ - 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ - 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ - 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ - 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ - 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ - 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ - 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ - 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ - 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ - 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ + AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ + AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ + AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ + AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ + AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ + AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ + AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ + AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ + AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ + AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ + AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ + AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ + AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ >; }; mmc3_pins_default: pinmux_mmc3_pins_default { pinctrl-single,pins = < - 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ - 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ - 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ - 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ - 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ + AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ + AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ + AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ + AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ >; }; mmc3_pins_sleep: pinmux_mmc3_pins_sleep { pinctrl-single,pins = < - 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ - 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ - 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ - 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ - 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ + AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ + AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ + AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ + AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ + AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ + AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ >; }; wlan_pins_default: pinmux_wlan_pins_default { pinctrl-single,pins = < - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ - 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ + AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ + AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ + AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ >; }; wlan_pins_sleep: pinmux_wlan_pins_sleep { pinctrl-single,pins = < - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ - 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ - 0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ + AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ + AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ + AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ >; }; uart3_pins: uart3_pins { pinctrl-single,pins = < - 0x228 (PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ - 0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ - 0x230 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ - 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ + AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ + AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ + AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ + AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ >; }; };
arch/arm/dts/am437x-sk-evm.dts +145 -145
395 lines not on this page · raw message
Signature · 1 line
2.39.2
PATCH 13/17 arm: dts: dra7x: Non-functional changes sync with v6.3-rc6
In reply to Andrew DavisThis is a collection of all the whitespace, renames, comment, and other changes that should not change the DT functionality from Linux v6.3-rc6.
--- arch/arm/dts/am571x-idk.dts | 6 +- arch/arm/dts/am572x-idk-common.dtsi | 8 +- arch/arm/dts/am57xx-beagle-x15-common.dtsi | 8 +- arch/arm/dts/am57xx-idk-common.dtsi | 4 +- arch/arm/dts/dra7-evm-common.dtsi | 12 +- arch/arm/dts/dra7-evm.dts | 4 +- arch/arm/dts/dra7.dtsi | 16 +- arch/arm/dts/dra71-evm.dts | 2 +- arch/arm/dts/dra72-evm-common.dtsi | 14 +- arch/arm/dts/dra72-evm-tps65917.dtsi | 2 +- arch/arm/dts/dra72x.dtsi | 6 +- arch/arm/dts/dra74x.dtsi | 8 +- arch/arm/dts/dra76-evm.dts | 4 +- arch/arm/dts/dra7xx-clocks.dtsi | 352 ++++++++++----------- 14 files changed, 226 insertions(+), 220 deletions(-)
arch/arm/dts/am571x-idk.dts +3 -3
@@ -74,17 +74,17 @@ &mailbox5 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { status = "okay"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { status = "okay"; }; }; &mailbox6 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { status = "okay"; }; };
arch/arm/dts/am572x-idk-common.dtsi +4 -4
@@ -81,20 +81,20 @@ &mailbox5 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { status = "okay"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { status = "okay"; }; }; &mailbox6 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { status = "okay"; }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + mbox_dsp2_ipc3x: mbox-dsp2-ipc3x { status = "okay"; }; };
arch/arm/dts/am57xx-beagle-x15-common.dtsi +4 -4
@@ -568,20 +568,20 @@ &mailbox5 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { status = "okay"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { status = "okay"; }; }; &mailbox6 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { status = "okay"; }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + mbox_dsp2_ipc3x: mbox-dsp2-ipc3x { status = "okay"; }; };
arch/arm/dts/am57xx-idk-common.dtsi +2 -2
@@ -437,7 +437,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1", "jedec,spi-nor"; spi-max-frequency = <76800000>; reg = <0>;
@@ -453,7 +453,7 @@ */ partition@0 { label = "QSPI.SPL"; - reg = <0x00000000 0x000040000>; + reg = <0x00000000 0x00040000>; }; partition@1 { label = "QSPI.u-boot";
arch/arm/dts/dra7-evm-common.dtsi +6 -6
@@ -129,7 +129,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>;
@@ -145,7 +145,7 @@ */ partition@0 { label = "QSPI.SPL"; - reg = <0x00000000 0x000010000>; + reg = <0x00000000 0x00010000>; }; partition@1 { label = "QSPI.SPL.backup1";
@@ -236,20 +236,20 @@ &mailbox5 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { status = "okay"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { status = "okay"; }; }; &mailbox6 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { status = "okay"; }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + mbox_dsp2_ipc3x: mbox-dsp2-ipc3x { status = "okay"; }; };
arch/arm/dts/dra7-evm.dts +2 -2
@@ -312,7 +312,7 @@ reg = <0x26>; gpio-controller; #gpio-cells = <2>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>;
@@ -416,7 +416,7 @@ #size-cells = <1>; partition@0 { label = "NAND.SPL"; - reg = <0x00000000 0x000020000>; + reg = <0x00000000 0x00020000>; }; partition@1 { label = "NAND.SPL.backup1";
arch/arm/dts/dra7.dtsi +11 -5
@@ -132,7 +132,7 @@ * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ - ocp { + ocp: ocp { compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>;
@@ -355,7 +355,13 @@ }; }; - axi@1 { + /* + * Register access seems to have complex dependencies and also + * seems to need an enabled phy. See the TRM chapter for "Table + * 26-678. Main Sequence PCIe Controller Global Initialization" + * and also dra7xx_pcie_probe(). + */ + axi1: target-module@51800000 { compatible = "simple-bus"; #size-cells = <1>; #address-cells = <1>;
@@ -370,8 +376,8 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x03000 0 0x00010000 - 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>, + <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>;
@@ -2110,4 +2116,4 @@ temperature = <120000>; /* milli Celsius */ }; -/include/ "dra7xx-clocks.dtsi" +#include "dra7xx-clocks.dtsi"
arch/arm/dts/dra71-evm.dts +1 -1
@@ -157,7 +157,7 @@ }; &pcf_hdmi { - p0 { + hdmi-i2c-disable-hog { /* * PM_OEn to High: Disable routing I2C3 to PM_I2C * With this PM_SEL(p3) should not matter
arch/arm/dts/dra72-evm-common.dtsi +7 -7
@@ -269,7 +269,7 @@ */ lines-initial-states = <0x0f2b>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>;
@@ -340,7 +340,7 @@ #size-cells = <1>; partition@0 { label = "NAND.SPL"; - reg = <0x00000000 0x000020000>; + reg = <0x00000000 0x00020000>; }; partition@1 { label = "NAND.SPL.backup1";
@@ -438,7 +438,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>;
@@ -454,7 +454,7 @@ */ partition@0 { label = "QSPI.SPL"; - reg = <0x00000000 0x000010000>; + reg = <0x00000000 0x00010000>; }; partition@1 { label = "QSPI.SPL.backup1";
@@ -546,17 +546,17 @@ &mailbox5 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { status = "okay"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { status = "okay"; }; }; &mailbox6 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { status = "okay"; }; };
arch/arm/dts/dra72-evm-tps65917.dtsi +1 -1
@@ -5,7 +5,7 @@ /* * Integrated Power Management Chip - * http://www.ti.com/lit/ds/symlink/tps65917-q1.pdf + * https://www.ti.com/lit/ds/symlink/tps65917-q1.pdf */ &tps65917 {
arch/arm/dts/dra72x.dtsi +3 -3
@@ -29,12 +29,12 @@ }; &mailbox5 { - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { ti,mbox-tx = <6 2 2>; ti,mbox-rx = <4 2 2>; status = "disabled"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { ti,mbox-tx = <5 2 2>; ti,mbox-rx = <1 2 2>; status = "disabled";
@@ -42,7 +42,7 @@ }; &mailbox6 { - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { ti,mbox-tx = <6 2 2>; ti,mbox-rx = <4 2 2>; status = "disabled";
arch/arm/dts/dra74x.dtsi +4 -4
@@ -98,12 +98,12 @@ }; &mailbox5 { - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { ti,mbox-tx = <6 2 2>; ti,mbox-rx = <4 2 2>; status = "disabled"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { ti,mbox-tx = <5 2 2>; ti,mbox-rx = <1 2 2>; status = "disabled";
@@ -111,12 +111,12 @@ }; &mailbox6 { - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { ti,mbox-tx = <6 2 2>; ti,mbox-rx = <4 2 2>; status = "disabled"; }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + mbox_dsp2_ipc3x: mbox-dsp2-ipc3x { ti,mbox-tx = <5 2 2>; ti,mbox-rx = <1 2 2>; status = "disabled";
arch/arm/dts/dra76-evm.dts +2 -2
@@ -271,7 +271,7 @@ reg = <0x26>; gpio-controller; #gpio-cells = <2>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>;
@@ -379,7 +379,7 @@ &qspi { spi-max-frequency = <96000000>; - m25p80@0 { + flash@0 { spi-max-frequency = <96000000>; }; };
arch/arm/dts/dra7xx-clocks.dtsi +176 -176
1,372 lines not on this page · raw message
Signature · 1 line
2.39.2
PATCH 16/17 arm: dts: keystone: Non-functional changes sync with v6.3-rc6
In reply to Andrew DavisThis is a collection of all the whitespace, renames, comment, and other changes that should not change the DT functionality from Linux v6.3-rc6.
--- arch/arm/dts/keystone-clocks.dtsi | 52 +++++++++--------- arch/arm/dts/keystone-k2e-clocks.dtsi | 8 +-- arch/arm/dts/keystone-k2e-evm.dts | 4 +- arch/arm/dts/keystone-k2e-netcp.dtsi | 26 ++++----- arch/arm/dts/keystone-k2e.dtsi | 10 ++-- arch/arm/dts/keystone-k2g-evm.dts | 4 +- arch/arm/dts/keystone-k2g-ice.dts | 2 +- arch/arm/dts/keystone-k2g-netcp.dtsi | 18 +++---- arch/arm/dts/keystone-k2g.dtsi | 2 +- arch/arm/dts/keystone-k2hk-clocks.dtsi | 74 +++++++++++++------------- arch/arm/dts/keystone-k2hk-evm.dts | 10 ++-- arch/arm/dts/keystone-k2hk-netcp.dtsi | 14 ++--- arch/arm/dts/keystone-k2l-clocks.dtsi | 44 +++++++-------- arch/arm/dts/keystone-k2l-evm.dts | 2 +- arch/arm/dts/keystone-k2l-netcp.dtsi | 19 +++---- arch/arm/dts/keystone-k2l.dtsi | 12 ++--- arch/arm/dts/keystone.dtsi | 14 ++--- 17 files changed, 159 insertions(+), 156 deletions(-)
arch/arm/dts/keystone-clocks.dtsi +26 -26
@@ -48,7 +48,7 @@ clocks { clock-output-names = "gemtraceclk"; }; - chipstmxptclk: chipstmxptclk { + chipstmxptclk: chipstmxptclk@2310164 { #clock-cells = <0>; compatible = "ti,keystone,pll-divider-clock"; clocks = <&mainmuxclk>;
@@ -157,7 +157,7 @@ clocks { clock-output-names = "chipclk1rstiso112"; }; - clkmodrst0: clkmodrst0 { + clkmodrst0: clkmodrst0@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>;
@@ -168,7 +168,7 @@ clocks { }; - clkusb: clkusb { + clkusb: clkusb@2350008 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>;
@@ -178,7 +178,7 @@ clocks { domain-id = <0>; }; - clkaemifspi: clkaemifspi { + clkaemifspi: clkaemifspi@235000c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>;
@@ -189,7 +189,7 @@ clocks { }; - clkdebugsstrc: clkdebugsstrc { + clkdebugsstrc: clkdebugsstrc@2350014 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>;
@@ -199,7 +199,7 @@ clocks { domain-id = <1>; }; - clktetbtrc: clktetbtrc { + clktetbtrc: clktetbtrc@2350018 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>;
@@ -209,7 +209,7 @@ clocks { domain-id = <1>; }; - clkpa: clkpa { + clkpa: clkpa@235001c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&paclk13>;
@@ -219,7 +219,7 @@ clocks { domain-id = <2>; }; - clkcpgmac: clkcpgmac { + clkcpgmac: clkcpgmac@2350020 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkpa>;
@@ -229,7 +229,7 @@ clocks { domain-id = <2>; }; - clksa: clksa { + clksa: clksa@2350024 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkpa>;
@@ -239,7 +239,7 @@ clocks { domain-id = <2>; }; - clkpcie: clkpcie { + clkpcie: clkpcie@2350028 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>;
@@ -249,7 +249,7 @@ clocks { domain-id = <3>; }; - clksr: clksr { + clksr: clksr@2350034 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1rstiso112>;
@@ -259,7 +259,7 @@ clocks { domain-id = <6>; }; - clkgem0: clkgem0 { + clkgem0: clkgem0@235003c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>;
@@ -269,7 +269,7 @@ clocks { domain-id = <8>; }; - clkddr30: clkddr30 { + clkddr30: clkddr30@235005c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>;
@@ -279,7 +279,7 @@ clocks { domain-id = <16>; }; - clkwdtimer0: clkwdtimer0 { + clkwdtimer0: clkwdtimer0@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
@@ -289,7 +289,7 @@ clocks { domain-id = <0>; }; - clkwdtimer1: clkwdtimer1 { + clkwdtimer1: clkwdtimer1@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
@@ -299,7 +299,7 @@ clocks { domain-id = <0>; }; - clkwdtimer2: clkwdtimer2 { + clkwdtimer2: clkwdtimer2@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
@@ -309,7 +309,7 @@ clocks { domain-id = <0>; }; - clkwdtimer3: clkwdtimer3 { + clkwdtimer3: clkwdtimer3@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
@@ -319,7 +319,7 @@ clocks { domain-id = <0>; }; - clktimer15: clktimer15 { + clktimer15: clktimer15@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
@@ -329,7 +329,7 @@ clocks { domain-id = <0>; }; - clkuart0: clkuart0 { + clkuart0: clkuart0@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
@@ -339,7 +339,7 @@ clocks { domain-id = <0>; }; - clkuart1: clkuart1 { + clkuart1: clkuart1@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
@@ -349,7 +349,7 @@ clocks { domain-id = <0>; }; - clkaemif: clkaemif { + clkaemif: clkaemif@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkaemifspi>;
@@ -359,7 +359,7 @@ clocks { domain-id = <0>; }; - clkusim: clkusim { + clkusim: clkusim@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
@@ -369,7 +369,7 @@ clocks { domain-id = <0>; }; - clki2c: clki2c { + clki2c: clki2c@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
@@ -379,7 +379,7 @@ clocks { domain-id = <0>; }; - clkspi: clkspi { + clkspi: clkspi@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkaemifspi>;
@@ -389,7 +389,7 @@ clocks { domain-id = <0>; }; - clkgpio: clkgpio { + clkgpio: clkgpio@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
@@ -399,7 +399,7 @@ clocks { domain-id = <0>; }; - clkkeymgr: clkkeymgr { + clkkeymgr: clkkeymgr@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>;
arch/arm/dts/keystone-k2e-clocks.dtsi +4 -4
@@ -32,7 +32,7 @@ clocks { reg-names = "control"; }; - clkusb1: clkusb1 { + clkusb1: clkusb1@2350004 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>;
@@ -42,7 +42,7 @@ clocks { domain-id = <0>; }; - clkhyperlink0: clkhyperlink0 { + clkhyperlink0: clkhyperlink0@2350030 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>;
@@ -52,7 +52,7 @@ clocks { domain-id = <5>; }; - clkpcie1: clkpcie1 { + clkpcie1: clkpcie1@235006c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>;
@@ -62,7 +62,7 @@ clocks { domain-id = <18>; }; - clkxge: clkxge { + clkxge: clkxge@23500c8 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>;
arch/arm/dts/keystone-k2e-evm.dts +2 -2
@@ -10,7 +10,7 @@ #include "keystone-k2e.dtsi" / { - compatible = "ti,k2e-evm","ti,keystone"; + compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"; model = "Texas Instruments Keystone 2 Edison EVM"; soc {
@@ -117,7 +117,7 @@ &spi0 { status = "okay"; - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "Micron,n25q128a11", "jedec,spi-nor";
arch/arm/dts/keystone-k2e-netcp.dtsi +13 -13
@@ -12,9 +12,9 @@ qmss: qmss@2a40000 { #size-cells = <1>; clocks = <&chipclk13>; ranges; - queue-range = <0 0x2000>; - linkram0 = <0x100000 0x4000>; - linkram1 = <0 0x10000>; + queue-range = <0 0x2000>; + linkram0 = <0x100000 0x4000>; + linkram1 = <0 0x10000>; qmgrs { #address-cells = <1>;
@@ -135,40 +135,40 @@ netcp: netcp@24000000 { interfaces { gbe0: interface-0 { slave-port = <0>; - link-interface = <1>; - phy-handle = <ðphy0>; + link-interface = <1>; + phy-handle = <ðphy0>; }; gbe1: interface-1 { slave-port = <1>; - link-interface = <1>; - phy-handle = <ðphy1>; + link-interface = <1>; + phy-handle = <ðphy1>; }; }; secondary-slave-ports { port-2 { slave-port = <2>; - link-interface = <2>; + link-interface = <2>; }; port-3 { slave-port = <3>; - link-interface = <2>; + link-interface = <2>; }; port-4 { slave-port = <4>; - link-interface = <2>; + link-interface = <2>; }; port-5 { slave-port = <5>; - link-interface = <2>; + link-interface = <2>; }; port-6 { slave-port = <6>; - link-interface = <2>; + link-interface = <2>; }; port-7 { slave-port = <7>; - link-interface = <2>; + link-interface = <2>; }; }; };
arch/arm/dts/keystone-k2e.dtsi +5 -5
@@ -42,7 +42,7 @@ usb: usb@2680000 { interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; - dwc3@2690000 { + usb@2690000 { interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; }; };
@@ -68,7 +68,7 @@ dma-ranges; status = "disabled"; - dwc3@25010000 { + usb@25010000 { compatible = "synopsys,dwc3"; reg = <0x25010000 0x70000>; interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
@@ -89,7 +89,7 @@ clock-names = "pcie"; #address-cells = <3>; #size-cells = <2>; - reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>; + reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>; ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000 0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
@@ -130,14 +130,14 @@ }; mdio: mdio@24200f00 { - compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x24200f00 0x100>; status = "disabled"; clocks = <&clkcpgmac>; clock-names = "fck"; - bus_freq = <2500000>; + bus_freq = <2500000>; }; /include/ "keystone-k2e-netcp.dtsi" };
arch/arm/dts/keystone-k2g-evm.dts +2 -2
@@ -90,8 +90,8 @@ &qspi { status = "okay"; - flash0: m25p80@0 { - compatible = "s25fl512s","jedec,spi-nor"; + flash0: flash@0 { + compatible = "s25fl512s", "jedec,spi-nor"; reg = <0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>;
arch/arm/dts/keystone-k2g-ice.dts +1 -1
@@ -38,7 +38,7 @@ &qspi { status = "okay"; - flash0: m25p80@0 { + flash0: flash@0 { compatible = "s25fl256s1", "jedec,spi-nor"; reg = <0>; spi-tx-bus-width = <1>;
arch/arm/dts/keystone-k2g-netcp.dtsi +9 -9
@@ -14,8 +14,8 @@ qmss: qmss@4020000 { /* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_VCLK>; */ clock-names = "nss_vclk"; ranges; - queue-range = <0 0x80>; - linkram0 = <0x4020000 0x7ff>; + queue-range = <0 0x80>; + linkram0 = <0x4020000 0x7ff>; qmgrs { #address-cells = <1>;
@@ -77,12 +77,12 @@ knav_dmas: knav_dmas@0 { dma_gbe: dma_gbe@0 { reg = <0x4010000 0x100>, - <0x4011000 0x2a0>, /* 21 Tx channels */ - <0x4012000 0x400>, /* 32 Rx channels */ - <0x4010100 0x80>, - <0x4013000 0x400>; /* 32 Rx flows */ + <0x4011000 0x2a0>, /* 21 Tx channels */ + <0x4012000 0x400>, /* 32 Rx channels */ + <0x4010100 0x80>, + <0x4013000 0x400>; /* 32 Rx flows */ reg-names = "global", "txchan", "rxchan", - "txsched", "rxflow"; + "txsched", "rxflow"; }; };
@@ -96,9 +96,9 @@ netcp: netcp@4000000 { reg = <0x2620110 0x8>; reg-names = "efuse"; compatible = "ti,netcp-1.0"; - status = "disabled"; #address-cells = <1>; #size-cells = <1>; + status = "disabled"; /* power-domains = <&k2g_pds K2G_DEV_NSS0>; */ /* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_ESW_CLK>; */ clock-names = "ethss_clk";
@@ -127,7 +127,7 @@ netcp: netcp@4000000 { interfaces { gbe0: interface-0 { slave-port = <0>; - link-interface = <5>; + link-interface = <5>; }; }; };
arch/arm/dts/keystone-k2g.dtsi +1 -1
@@ -40,7 +40,7 @@ }; }; - gic: interrupt-controller { + gic: interrupt-controller@2561000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller;
arch/arm/dts/keystone-k2hk-clocks.dtsi +37 -37
296 lines not on this page · raw message
arch/arm/dts/keystone-k2hk-evm.dts +5 -5
@@ -54,22 +54,22 @@ leds { compatible = "gpio-leds"; - debug1_1 { + led-debug-1-1 { label = "keystone:green:debug1"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */ }; - debug1_2 { + led-debug-1-2 { label = "keystone:red:debug1"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */ }; - debug2 { + led-debug-2 { label = "keystone:blue:debug2"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */ }; - debug3 { + led-debug-3 { label = "keystone:blue:debug3"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */ };
@@ -145,7 +145,7 @@ &spi0 { status = "okay"; - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "Micron,n25q128a11", "jedec,spi-nor";
arch/arm/dts/keystone-k2hk-netcp.dtsi +8 -6
@@ -12,9 +12,9 @@ qmss: qmss@2a40000 { #size-cells = <1>; clocks = <&chipclk13>; ranges; - queue-range = <0 0x4000>; - linkram0 = <0x100000 0x8000>; - linkram1 = <0x0 0x10000>; + queue-range = <0 0x4000>; + linkram0 = <0x100000 0x8000>; + linkram1 = <0x0 0x10000>; qmgrs { #address-cells = <1>;
@@ -44,6 +44,7 @@ qmss: qmss@2a40000 { "region", "push", "pop"; }; }; + queue-pools { qpend { qpend-0 {
@@ -86,6 +87,7 @@ qmss: qmss@2a40000 { }; }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>;
@@ -126,7 +128,7 @@ netcp: netcp@2000000 { #size-cells = <1>; /* NetCP address range */ - ranges = <0 0x2000000 0x100000>; + ranges = <0 0x2000000 0x100000>; clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; dma-coherent;
@@ -166,11 +168,11 @@ netcp: netcp@2000000 { secondary-slave-ports { port-2 { slave-port = <2>; - link-interface = <2>; + link-interface = <2>; }; port-3 { slave-port = <3>; - link-interface = <2>; + link-interface = <2>; }; }; };
arch/arm/dts/keystone-k2l-clocks.dtsi +22 -22
176 lines not on this page · raw message
arch/arm/dts/keystone-k2l-evm.dts +1 -1
@@ -94,7 +94,7 @@ &spi0 { status ="okay"; - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "Micron,n25q128a11", "jedec,spi-nor";
arch/arm/dts/keystone-k2l-netcp.dtsi +10 -9
@@ -12,9 +12,9 @@ qmss: qmss@2a40000 { #size-cells = <1>; clocks = <&chipclk13>; ranges; - queue-range = <0 0x2000>; - linkram0 = <0x100000 0x4000>; - linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */ + queue-range = <0 0x2000>; + linkram0 = <0x100000 0x4000>; + linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */ qmgrs { #address-cells = <1>;
@@ -70,6 +70,7 @@ qmss: qmss@2a40000 { }; }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>;
@@ -134,24 +135,24 @@ netcp: netcp@26000000 { interfaces { gbe0: interface-0 { slave-port = <0>; - link-interface = <1>; - phy-handle = <ðphy0>; + link-interface = <1>; + phy-handle = <ðphy0>; }; gbe1: interface-1 { slave-port = <1>; - link-interface = <1>; - phy-handle = <ðphy1>; + link-interface = <1>; + phy-handle = <ðphy1>; }; }; secondary-slave-ports { port-2 { slave-port = <2>; - link-interface = <2>; + link-interface = <2>; }; port-3 { slave-port = <3>; - link-interface = <2>; + link-interface = <2>; }; }; };
arch/arm/dts/keystone-k2l.dtsi +6 -6
@@ -28,23 +28,23 @@ soc { /include/ "keystone-k2l-clocks.dtsi" - uart2: serial@02348400 { + uart2: serial@2348400 { compatible = "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; reg = <0x02348400 0x100>; - clocks = <&clkuart2>; + clocks = <&clkuart2>; interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>; }; - uart3: serial@02348800 { + uart3: serial@2348800 { compatible = "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; reg = <0x02348800 0x100>; - clocks = <&clkuart3>; + clocks = <&clkuart3>; interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>; };
@@ -77,14 +77,14 @@ }; mdio: mdio@26200f00 { - compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x26200f00 0x100>; status = "disabled"; clocks = <&clkcpgmac>; clock-names = "fck"; - bus_freq = <2500000>; + bus_freq = <2500000>; }; /include/ "keystone-k2l-netcp.dtsi" };
arch/arm/dts/keystone.dtsi +7 -7
@@ -91,23 +91,23 @@ /include/ "keystone-clocks.dtsi" - uart0: serial@02530c00 { + uart0: serial@2530c00 { compatible = "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; reg = <0x02530c00 0x100>; - clocks = <&clkuart0>; + clocks = <&clkuart0>; interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; }; - uart1: serial@02531000 { + uart1: serial@2531000 { compatible = "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; reg = <0x02531000 0x100>; - clocks = <&clkuart1>; + clocks = <&clkuart1>; interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>; };
@@ -195,7 +195,7 @@ dma-ranges; status = "disabled"; - dwc3@2690000 { + usb@2690000 { compatible = "synopsys,dwc3"; reg = <0x2690000 0x70000>; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
@@ -203,7 +203,7 @@ }; }; - wdt: wdt@022f0080 { + wdt: wdt@22f0080 { compatible = "ti,keystone-wdt","ti,davinci-wdt"; reg = <0x022f0080 0x80>; clocks = <&clkwdtimer0>;
@@ -287,7 +287,7 @@ clock-names = "pcie"; #address-cells = <3>; #size-cells = <2>; - reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>; + reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>; ranges = <0x81000000 0 0 0x23250000 0 0x4000 0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
Signature · 1 line
2.39.2
PATCH 10/17 arm: dts: am3x: Update IOPAD to PADCONF to sync with v6.3-rc6
In reply to Andrew DavisSeveral DTS files have been updated in the Linux kernel with a new PADCONF macro replacing the IOPAD version. Sync for the same here.
--- arch/arm/dts/am335x-base0033.dts | 48 ++-- arch/arm/dts/am335x-chiliboard.dts | 66 +++--- arch/arm/dts/am335x-chilisom.dtsi | 34 +-- arch/arm/dts/am335x-evm.dts | 212 +++++++++--------- arch/arm/dts/am335x-evmsk.dts | 278 ++++++++++++------------ arch/arm/dts/am335x-icev2.dts | 104 ++++----- arch/arm/dts/am335x-igep0033.dtsi | 40 ++-- arch/arm/dts/am335x-osd335x-common.dtsi | 4 +- arch/arm/dts/am335x-pdu001.dts | 170 +++++++-------- arch/arm/dts/am335x-phycore-som.dtsi | 60 ++--- arch/arm/dts/am335x-pocketbeagle.dts | 54 ++--- arch/arm/dts/am335x-regor.dtsi | 80 +++---- arch/arm/dts/am335x-shc.dts | 226 ++++++++++--------- arch/arm/dts/am335x-sl50.dts | 132 +++++------ arch/arm/dts/am335x-wega.dtsi | 68 +++--- 15 files changed, 787 insertions(+), 789 deletions(-)
arch/arm/dts/am335x-base0033.dts +24 -24
@@ -43,39 +43,39 @@ &am33xx_pinmux { nxp_hdmi_pins: pinmux_nxp_hdmi_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ >; }; leds_base_pins: pinmux_leds_base_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn3.gpio2_0 */ >; }; };
arch/arm/dts/am335x-chiliboard.dts +33 -33
112 lines not on this page · raw message
arch/arm/dts/am335x-chilisom.dtsi +17 -17
@@ -27,28 +27,28 @@ i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; nandflash_pins: nandflash_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE0) + + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; };
arch/arm/dts/am335x-evm.dts +106 -106
312 lines not on this page · raw message
arch/arm/dts/am335x-evmsk.dts +139 -139
373 lines not on this page · raw message
arch/arm/dts/am335x-icev2.dts +52 -52
154 lines not on this page · raw message
arch/arm/dts/am335x-igep0033.dtsi +20 -20
@@ -54,41 +54,41 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */ >; }; };
arch/arm/dts/am335x-osd335x-common.dtsi +2 -2
@@ -36,8 +36,8 @@ &am33xx_pinmux { i2c0_pins: pinmux-i2c0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; };
arch/arm/dts/am335x-pdu001.dts +85 -85
247 lines not on this page · raw message
arch/arm/dts/am335x-phycore-som.dtsi +30 -30
90 lines not on this page · raw message
arch/arm/dts/am335x-pocketbeagle.dts +27 -27
101 lines not on this page · raw message
arch/arm/dts/am335x-regor.dtsi +40 -40
128 lines not on this page · raw message
arch/arm/dts/am335x-shc.dts +112 -114
305 lines not on this page · raw message
arch/arm/dts/am335x-sl50.dts +66 -66
216 lines not on this page · raw message
arch/arm/dts/am335x-wega.dtsi +34 -34
103 lines not on this page · raw message
Signature · 1 line
2.39.2
Re: [PATCH 01/17] arm: dts: am3x: Update devicetree header comments to sync with v6.3-rc6
In reply to Andrew DavisQuoted 1 line · Andrew Davis
Signed-off-by Andrew Davis <[email protected]>
For the series, applied to u-boot/master, thanks!
Signature · 1 line
Tom