Skip to contentSkip to conversation

ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15

PATCH New Sasha Levin 1 participant 20 messages Apr 13, 2023

Subsystems (15)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/20 ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15

From: Eugene Huang <[email protected]>

[ Upstream commit 3c728b1bc5b99c5275ac5c7788ef814c0e51ef54 ]

Same quirks as the 'Bishop County' NUC M15, except the rt711 is in the 'JD2 100K' jack detection mode.

---
 sound/soc/intel/boards/sof_sdw.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
sound/soc/intel/boards/sof_sdw.c +11 -0
index d2ed807abde95..767fa89d08708 100644
@@ -213,6 +213,17 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 					SOF_SDW_PCH_DMIC |
 					RT711_JD1),
 	},
+	{
+		/* NUC15 'Rooks County' LAPRC510 and LAPRC710 skews */
+		.callback = sof_sdw_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel(R) Client Systems"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LAPRC"),
+		},
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_SDW_PCH_DMIC |
+					RT711_JD2_100K),
+	},
 	/* TigerLake-SDCA devices */
 	{
 		.callback = sof_sdw_quirk_cb,
Signature · 1 line
2.39.2
author maintainer
#1 lore raw

PATCH 2/20 ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15

From: Eugene Huang <[email protected]>

[ Upstream commit 9c691a42b8926c8966561265cdae3ddc7464d3a2 ]

Same topology as the HP Omen 16-k0005TX, except with the rt1316 amp on link2.

---
 .../intel/common/soc-acpi-intel-adl-match.c   | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
sound/soc/intel/common/soc-acpi-intel-adl-match.c +20 -0
index 28dd2046e4ac5..d8c80041388a7 100644
@@ -354,6 +354,20 @@ static const struct snd_soc_acpi_link_adr adl_sdw_rt711_link0_rt1316_link3[] = {
 	{}
 };
 
+static const struct snd_soc_acpi_link_adr adl_sdw_rt711_link0_rt1316_link2[] = {
+	{
+		.mask = BIT(0),
+		.num_adr = ARRAY_SIZE(rt711_sdca_0_adr),
+		.adr_d = rt711_sdca_0_adr,
+	},
+	{
+		.mask = BIT(2),
+		.num_adr = ARRAY_SIZE(rt1316_2_single_adr),
+		.adr_d = rt1316_2_single_adr,
+	},
+	{}
+};
+
 static const struct snd_soc_acpi_adr_device mx8373_2_adr[] = {
 	{
 		.adr = 0x000223019F837300ull,
@@ -624,6 +638,12 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_adl_sdw_machines[] = {
 		.drv_name = "sof_sdw",
 		.sof_tplg_filename = "sof-adl-rt711-l0-rt1316-l3.tplg",
 	},
+	{
+		.link_mask = 0x5, /* 2 active links required */
+		.links = adl_sdw_rt711_link0_rt1316_link2,
+		.drv_name = "sof_sdw",
+		.sof_tplg_filename = "sof-adl-rt711-l0-rt1316-l2.tplg",
+	},
 	{
 		.link_mask = 0x1, /* link0 required */
 		.links = adl_rvp,
Signature · 1 line
2.39.2
author maintainer
#2 lore raw

PATCH 3/20 ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm

In reply to Sasha Levin

From: Shengjiu Wang <[email protected]>

[ Upstream commit 083a25b18d6ad9f1f540e629909aa3eaaaf01823 ]

The hw->formats may be set by snd_dmaengine_pcm_refine_runtime_hwparams() in component's startup()/open(), but soc_pcm_hw_init() will init hw->formats in dpcm_runtime_setup_fe() after component's startup()/open(), which causes the valuable hw->formats to be cleared.

So need to store the hw->formats before initialization, then restore it after initialization.

---
 sound/soc/soc-pcm.c | 4 ++++
 1 file changed, 4 insertions(+)
sound/soc/soc-pcm.c +4 -0
index 579a44d81d9a3..d409b99af75b2 100644
@@ -1649,10 +1649,14 @@ static void dpcm_runtime_setup_fe(struct snd_pcm_substream *substream)
 	struct snd_pcm_hardware *hw = &runtime->hw;
 	struct snd_soc_dai *dai;
 	int stream = substream->stream;
+	u64 formats = hw->formats;
 	int i;
 
 	soc_pcm_hw_init(hw);
 
+	if (formats)
+		hw->formats &= formats;
+
 	for_each_rtd_cpu_dais(fe, i, dai) {
 		struct snd_soc_pcm_stream *cpu_stream;
 
Signature · 1 line
2.39.2
author maintainer
#3 lore raw

PATCH 4/20 x86/hyperv: Block root partition functionality in a Confidential VM

In reply to Sasha Levin

From: Michael Kelley <[email protected]>

[ Upstream commit f8acb24aaf89fc46cd953229462ea8abe31b395f ]

Hyper-V should never specify a VM that is a Confidential VM and also running in the root partition. Nonetheless, explicitly block such a combination to guard against a compromised Hyper-V maliciously trying to exploit root partition functionality in a Confidential VM to expose Confidential VM secrets. No known bug is being fixed, but the attack surface for Confidential VMs on Hyper-V is reduced.

---
 arch/x86/kernel/cpu/mshyperv.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
arch/x86/kernel/cpu/mshyperv.c +8 -4
index 46668e2554210..1ce228dc267ae 100644
@@ -291,12 +291,16 @@ static void __init ms_hyperv_init_platform(void)
 	 * To mirror what Windows does we should extract CPU management
 	 * features and use the ReservedIdentityBit to detect if Linux is the
 	 * root partition. But that requires negotiating CPU management
-	 * interface (a process to be finalized).
+	 * interface (a process to be finalized). For now, use the privilege
+	 * flag as the indicator for running as root.
 	 *
-	 * For now, use the privilege flag as the indicator for running as
-	 * root.
+	 * Hyper-V should never specify running as root and as a Confidential
+	 * VM. But to protect against a compromised/malicious Hyper-V trying
+	 * to exploit root behavior to expose Confidential VM memory, ignore
+	 * the root partition setting if also a Confidential VM.
 	 */
-	if (cpuid_ebx(HYPERV_CPUID_FEATURES) & HV_CPU_MANAGEMENT) {
+	if ((ms_hyperv.priv_high & HV_CPU_MANAGEMENT) &&
+	    !(ms_hyperv.priv_high & HV_ISOLATION)) {
 		hv_root_partition = true;
 		pr_info("Hyper-V: running as root partition\n");
 	}
Signature · 1 line
2.39.2
author maintainer
#4 lore raw

PATCH 5/20 ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)

In reply to Sasha Levin

From: Ge-org Brohammer <[email protected]>

[ Upstream commit 205efd4619b860404ebb5882e5a119eb3b3b3716 ]

This model requires an additional detection quirk to enable the internal microphone.

Tried to use git send-email this time.

---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)
sound/soc/amd/yc/acp6x-mach.c +7 -0
index 4a69ce702360c..0acdf0156f075 100644
@@ -269,6 +269,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "8A43"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
+			DMI_MATCH(DMI_BOARD_NAME, "8A22"),
+		}
+	},
 	{}
 };
 
Signature · 1 line
2.39.2
author maintainer
#5 lore raw

PATCH 6/20 iio: adc: palmas_gpadc: fix NULL dereference on rmmod

In reply to Sasha Levin

From: Patrik Dahlström <[email protected]>

[ Upstream commit 49f76c499d38bf67803438eee88c8300d0f6ce09 ]

Calling dev_to_iio_dev() on a platform device pointer is undefined and will make adc NULL.

---
 drivers/iio/adc/palmas_gpadc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/adc/palmas_gpadc.c +1 -1
index fd000345ec5cf..849a697a467e5 100644
@@ -639,7 +639,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
 
 static int palmas_gpadc_remove(struct platform_device *pdev)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(&pdev->dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(&pdev->dev);
 	struct palmas_gpadc *adc = iio_priv(indio_dev);
 
 	if (adc->wakeup1_enable || adc->wakeup2_enable)
Signature · 1 line
2.39.2
author maintainer
#9 lore raw

PATCH 10/20 net: wwan: t7xx: do not compile with -Werror

In reply to Sasha Levin

From: "Jiri Slaby (SUSE)" <[email protected]>

[ Upstream commit 362f0b6678ad1377c322a7dd237ea6785efc7342 ]

When playing with various compilers or their versions, some choke on the t7xx code. For example (with gcc 13):
In file included from ./arch/s390/include/generated/asm/rwonce.h:1,

                  from ../include/linux/compiler.h:247,
                  from ../include/linux/build_bug.h:5,
                  from ../include/linux/bits.h:22,
                  from ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:17:
 In function 'preempt_count',
     inlined from 't7xx_fsm_append_event' at ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:439:43:

../include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'const volatile int[0]' [-Werror=array-bounds=]

There is no reason for any code in the kernel to be built with -Werror by default. Note that we have generic CONFIG_WERROR. So if anyone wants -Werror, they can enable that.

Cc Chandrashekar Devegowda <[email protected]>
Cc Intel Corporation <[email protected]>
Cc Chiranjeevi Rapolu <[email protected]>
Cc Liu Haijun <[email protected]>
Cc M Chetan Kumar <[email protected]>
Cc Ricardo Martinez <[email protected]>
Cc Loic Poulain <[email protected]>
Cc Sergey Ryazanov <[email protected]>
Cc Johannes Berg <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Eric Dumazet <[email protected]>
Cc Jakub Kicinski <[email protected]>
Cc Paolo Abeni <[email protected]>
---
 drivers/net/wwan/t7xx/Makefile | 2 --
 1 file changed, 2 deletions(-)
drivers/net/wwan/t7xx/Makefile +0 -2
index 268ff9e87e5b3..2652cd00504e6 100644
@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
-ccflags-y += -Werror
-
 obj-${CONFIG_MTK_T7XX} := mtk_t7xx.o
 mtk_t7xx-y:=	t7xx_pci.o \
 		t7xx_pcie_mac.o \
Signature · 1 line
2.39.2
author maintainer
#10 lore raw

PATCH 11/20 wifi: mt76: mt7921: Fix use-after-free in fw features query.

In reply to Sasha Levin

From: Ben Greear <[email protected]>

[ Upstream commit 2ceb76f734e37833824b7fab6af17c999eb48d2b ]

Stop referencing 'features' memory after release_firmware is called.

Fixes this crash:

RIP: 0010:mt7921_check_offload_capability+0x17d
mt7921_pci_probe+0xca/0x4b0

...

---
 drivers/net/wireless/mediatek/mt76/mt7921/init.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7921/init.c +5 -2
index d4b681d7e1d22..f2c6ec4d8e2ee 100644
@@ -162,12 +162,12 @@ mt7921_mac_init_band(struct mt7921_dev *dev, u8 band)
 
 u8 mt7921_check_offload_capability(struct device *dev, const char *fw_wm)
 {
-	struct mt7921_fw_features *features = NULL;
 	const struct mt76_connac2_fw_trailer *hdr;
 	struct mt7921_realease_info *rel_info;
 	const struct firmware *fw;
 	int ret, i, offset = 0;
 	const u8 *data, *end;
+	u8 offload_caps = 0;
 
 	ret = request_firmware(&fw, fw_wm, dev);
 	if (ret)
@@ -199,7 +199,10 @@ u8 mt7921_check_offload_capability(struct device *dev, const char *fw_wm)
 		data += sizeof(*rel_info);
 
 		if (rel_info->tag == MT7921_FW_TAG_FEATURE) {
+			struct mt7921_fw_features *features;
+
 			features = (struct mt7921_fw_features *)data;
+			offload_caps = features->data;
 			break;
 		}
 
@@ -209,7 +212,7 @@ u8 mt7921_check_offload_capability(struct device *dev, const char *fw_wm)
 out:
 	release_firmware(fw);
 
-	return features ? features->data : 0;
+	return offload_caps;
 }
 EXPORT_SYMBOL_GPL(mt7921_check_offload_capability);
 
Signature · 1 line
2.39.2
author maintainer
#15 lore raw

PATCH 16/20 wifi: ath11k: reduce the MHI timeout to 20s

In reply to Sasha Levin

From: Kalle Valo <[email protected]>

[ Upstream commit cf5fa3ca0552f1b7ba8490de40700bbfb6979b17 ]

Currently ath11k breaks after hibernation, the reason being that ath11k expects that the wireless device will have power during suspend and the firmware will continue running. But of course during hibernation the power from the device is cut off and firmware is not running when resuming, so ath11k will fail.

(The reason why ath11k needs the firmware running is the interaction between mac80211 and MHI stack, it's a long story and more info in the bugzilla report.)

In SUSE kernels the watchdog timeout is reduced from the default 120 to 60 seconds:

CONFIG_DPM_WATCHDOG_TIMEOUT=60

But as the ath11k MHI timeout is 90 seconds the kernel will crash before will ath11k will recover in resume callback. To avoid the crash reduce the MHI timeout to just 20 seconds.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9

---
 drivers/net/wireless/ath/ath11k/mhi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath11k/mhi.c +1 -1
index 86995e8dc9135..a62ee05c54097 100644
@@ -16,7 +16,7 @@
 #include "pci.h"
 #include "pcic.h"
 
-#define MHI_TIMEOUT_DEFAULT_MS	90000
+#define MHI_TIMEOUT_DEFAULT_MS	20000
 #define RDDM_DUMP_SIZE	0x420000
 
 static struct mhi_channel_config ath11k_mhi_channels_qca6390[] = {
Signature · 7 lines
2.39.2


-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
author maintainer
#6 lore raw

PATCH 7/20 ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit e38c5e80c3d293a883c6f1d553f2146ec0bda35e ]

The Acer Iconia One 7 B1-750 tablet mostly works fine with the defaults for an Bay Trail CR tablet. Except for the internal mic, instead of an analog mic on IN3 a digital mic on DMIC1 is uses.

Add a quirk with these settings for this tablet.

---
 sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
sound/soc/intel/boards/bytcr_rt5640.c +12 -0
index 79e0039c79a38..5a12940ef9070 100644
@@ -533,6 +533,18 @@ static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
 
 /* Please keep this list alphabetically sorted */
 static const struct dmi_system_id byt_rt5640_quirk_table[] = {
+	{	/* Acer Iconia One 7 B1-750 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "VESPA2"),
+		},
+		.driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+					BYT_RT5640_JD_SRC_JD1_IN4P |
+					BYT_RT5640_OVCD_TH_1500UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Acer Iconia Tab 8 W1-810 */
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Acer"),
Signature · 1 line
2.39.2
author maintainer
#8 lore raw

PATCH 9/20 ASoC: da7213.c: add missing pm_runtime_disable()

In reply to Sasha Levin

From: Duy Nguyen <[email protected]>

[ Upstream commit 44378cd113e5f15bb0a89f5ac5a0e687b52feb90 ]

da7213.c is missing pm_runtime_disable(), thus we will get below error when rmmod -> insmod.

	$ rmmod  snd-soc-da7213.ko
	$ insmod snd-soc-da7213.ko
	da7213 0-001a: Unbalanced pm_runtime_enable!"

[Kuninori adjusted to latest upstream]

---
 sound/soc/codecs/da7213.c | 6 ++++++
 1 file changed, 6 insertions(+)
sound/soc/codecs/da7213.c +6 -0
index 544ccbcfc8844..5678683c71bee 100644
@@ -1996,6 +1996,11 @@ static int da7213_i2c_probe(struct i2c_client *i2c)
 	return ret;
 }
 
+static void da7213_i2c_remove(struct i2c_client *i2c)
+{
+	pm_runtime_disable(&i2c->dev);
+}
+
 static int __maybe_unused da7213_runtime_suspend(struct device *dev)
 {
 	struct da7213_priv *da7213 = dev_get_drvdata(dev);
@@ -2039,6 +2044,7 @@ static struct i2c_driver da7213_i2c_driver = {
 		.pm = &da7213_pm,
 	},
 	.probe_new	= da7213_i2c_probe,
+	.remove		= da7213_i2c_remove,
 	.id_table	= da7213_i2c_id,
 };
 
Signature · 1 line
2.39.2
author maintainer
#7 lore raw

PATCH 8/20 pwm: Zero-initialize the pwm_state passed to driver's .get_state()

In reply to Sasha Levin

From: Uwe Kleine-König <[email protected]>

[ Upstream commit 1271a7b98e7989ba6bb978e14403fc84efe16e13 ]

This is just to ensure that .usage_power is properly initialized and doesn't contain random stack data. The other members of struct pwm_state should get a value assigned in a successful call to .get_state(). So in the absence of bugs in driver implementations, this is only a safe-guard and no fix.

---
 drivers/pwm/core.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/pwm/core.c +10 -2
index e01147f66e15a..474725714a05b 100644
@@ -115,7 +115,14 @@ static int pwm_device_request(struct pwm_device *pwm, const char *label)
 	}
 
 	if (pwm->chip->ops->get_state) {
-		struct pwm_state state;
+		/*
+		 * Zero-initialize state because most drivers are unaware of
+		 * .usage_power. The other members of state are supposed to be
+		 * set by lowlevel drivers. We still initialize the whole
+		 * structure for simplicity even though this might paper over
+		 * faulty implementations of .get_state().
+		 */
+		struct pwm_state state = { 0, };
 
 		err = pwm->chip->ops->get_state(pwm->chip, pwm, &state);
 		trace_pwm_get(pwm, &state, err);
@@ -448,7 +455,7 @@ static void pwm_apply_state_debug(struct pwm_device *pwm,
 {
 	struct pwm_state *last = &pwm->last;
 	struct pwm_chip *chip = pwm->chip;
-	struct pwm_state s1, s2;
+	struct pwm_state s1 = { 0 }, s2 = { 0 };
 	int err;
 
 	if (!IS_ENABLED(CONFIG_PWM_DEBUG))
@@ -530,6 +537,7 @@ static void pwm_apply_state_debug(struct pwm_device *pwm,
 		return;
 	}
 
+	*last = (struct pwm_state){ 0 };
 	err = chip->ops->get_state(chip, pwm, last);
 	trace_pwm_get(pwm, last, err);
 	if (err)
Signature · 1 line
2.39.2
author maintainer
#12 lore raw

PATCH 13/20 scsi: mpi3mr: Handle soft reset in progress fault code (0xF002)

In reply to Sasha Levin

From: Ranjan Kumar <[email protected]>

[ Upstream commit a3d27dfdcfc27ac3f46de5391bb6d24f04af7941 ]

The driver is exiting from the fault watchdog thread if it sees the 0xF002 (Soft reset in progress) fault code.

If the driver initiates the soft reset, then the driver restarts the watchdog at the end of the soft reset completion. However, if the soft reset is initiated by the firmware asynchronously, then the driver will never restart the watchdog and never re-initialize the controller after the asynchronous soft reset completion.

---
 drivers/scsi/mpi3mr/mpi3mr_fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/mpi3mr/mpi3mr_fw.c +1 -1
index a565817aa56d4..d109a4ceb72b1 100644
@@ -2526,7 +2526,7 @@ static void mpi3mr_watchdog_work(struct work_struct *work)
 		mrioc->unrecoverable = 1;
 		goto schedule_work;
 	case MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS:
-		return;
+		goto schedule_work;
 	case MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET:
 		reset_reason = MPI3MR_RESET_FROM_CIACTIV_FAULT;
 		break;
Signature · 1 line
2.39.2
author maintainer
#13 lore raw

PATCH 14/20 net: sfp: add quirk enabling 2500Base-x for HG MXPD-483II

In reply to Sasha Levin

From: Daniel Golle <[email protected]>

[ Upstream commit ad651d68cee75e9ac20002254c4e5d09ee67a84b ]

The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X, however, in their EEPROM they incorrectly specify:
Transceiver type : Ethernet: 1000BASE-LX
...
BR, Nominal : 2600MBd

Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.

https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60

---
 drivers/net/phy/sfp.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/phy/sfp.c +4 -0
index 83b99d95b2787..10a5a6f4ec307 100644
@@ -389,6 +389,10 @@ static const struct sfp_quirk sfp_quirks[] = {
 
 	SFP_QUIRK_F("HALNy", "HL-GSFP", sfp_fixup_halny_gsfp),
 
+	// HG MXPD-483II-F 2.5G supports 2500Base-X, but incorrectly reports
+	// 2600MBd in their EERPOM
+	SFP_QUIRK_M("HG GENUINE", "MXPD-483II", sfp_quirk_2500basex),
+
 	// Huawei MA5671A can operate at 2500base-X, but report 1.2GBd NRZ in
 	// their EEPROM
 	SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex,
Signature · 1 line
2.39.2
author maintainer
#16 lore raw

PATCH 17/20 tracing: Error if a trace event has an array for a __field()

In reply to Sasha Levin

From: "Steven Rostedt (Google)" <[email protected]>

[ Upstream commit f82e7ca019dfad3b006fd3b772f7ac569672db55 ]

A __field() in the TRACE_EVENT() macro is used to set up the fields of the trace event data. It is for single storage units (word, char, int, pointer, etc) and not for complex structures or arrays. Unfortunately, there's nothing preventing the build from accepting:

    __field(int, arr[5]);

from building. It will turn into a array value. This use to work fine, as the offset and size use to be determined by the macro using the field name, but things have changed and the offset and size are now determined by the type. So the above would only be size 4, and the next field will be located 4 bytes from it (instead of 20).

The proper way to declare static arrays is to use the __array() macro.

Instead of __field(int, arr[5]) it should be __array(int, arr, 5).

Add some macro tricks to the building of a trace event from the TRACE_EVENT() macro such that __field(int, arr[5]) will fail to build. A comment by the failure will explain why the build failed.

---
 include/trace/stages/stage5_get_offsets.h | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)
include/trace/stages/stage5_get_offsets.h +17 -4
index ac5c24d3beeb2..e30a13be46ba5 100644
@@ -9,17 +9,30 @@
 #undef __entry
 #define __entry entry
 
+/*
+ * Fields should never declare an array: i.e. __field(int, arr[5])
+ * If they do, it will cause issues in parsing and possibly corrupt the
+ * events. To prevent that from happening, test the sizeof() a fictitious
+ * type called "struct _test_no_array_##item" which will fail if "item"
+ * contains array elements (like "arr[5]").
+ *
+ * If you hit this, use __array(int, arr, 5) instead.
+ */
 #undef __field
-#define __field(type, item)
+#define __field(type, item)					\
+	{ (void)sizeof(struct _test_no_array_##item *); }
 
 #undef __field_ext
-#define __field_ext(type, item, filter_type)
+#define __field_ext(type, item, filter_type)			\
+	{ (void)sizeof(struct _test_no_array_##item *); }
 
 #undef __field_struct
-#define __field_struct(type, item)
+#define __field_struct(type, item)				\
+	{ (void)sizeof(struct _test_no_array_##item *); }
 
 #undef __field_struct_ext
-#define __field_struct_ext(type, item, filter_type)
+#define __field_struct_ext(type, item, filter_type)		\
+	{ (void)sizeof(struct _test_no_array_##item *); }
 
 #undef __array
 #define __array(type, item, len)
Signature · 1 line
2.39.2
author maintainer
#14 lore raw

PATCH 15/20 platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk list

In reply to Sasha Levin

From: Benjamin Asbach <[email protected]>

[ Upstream commit 9a469c6dfab38326f99f105386db84230be09ee3 ]

From the commit message adding the first s2idle quirks:

Quoted 7 lines

Lenovo laptops that contain NVME SSDs across a variety of generations have trouble resuming from suspend to idle when the IOMMU translation layer is active for the NVME storage device.

This generally manifests as a large resume delay or page faults. These delays and page faults occur as a result of a Lenovo BIOS specific SMI that runs during the D3->D0 transition on NVME devices.

Add the DMI ids for another variant of the T14s Gen1, which also needs the s2idle quirk.

---
 drivers/platform/x86/thinkpad_acpi.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/platform/x86/thinkpad_acpi.c +8 -0
index 32c10457399e4..7191ff2625b1e 100644
@@ -4478,6 +4478,14 @@ static const struct dmi_system_id fwbug_list[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "20UH"),
 		}
 	},
+	{
+		.ident = "T14s Gen1 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20UJ"),
+		}
+	},
 	{
 		.ident = "P14s Gen1 AMD",
 		.driver_data = &quirk_s2idle_bug,
Signature · 1 line
2.39.2
author maintainer
#11 lore raw

PATCH 12/20 selftests mount: Fix mount_setattr_test builds failed

In reply to Sasha Levin

From: Anh Tuan Phan <[email protected]>

[ Upstream commit f1594bc676579133a3cd906d7d27733289edfb86 ]

When compiling selftests with target mount_setattr I encountered some errors with the below messages:
mount_setattr_test.c: In function ‘mount_setattr_thread’:
mount_setattr_test.c:343:16: error: variable ‘attr’ has initializer but incomplete type

  343 |         struct mount_attr attr = {
      |                ^~~~~~~~~~

These errors might be because of linux/mount.h is not included. This patch resolves that issue.

---
 tools/testing/selftests/mount_setattr/mount_setattr_test.c | 1 +
 1 file changed, 1 insertion(+)
tools/testing/selftests/mount_setattr/mount_setattr_test.c +1 -0
index 8c5fea68ae677..969647228817b 100644
@@ -18,6 +18,7 @@
 #include <grp.h>
 #include <stdbool.h>
 #include <stdarg.h>
+#include <linux/mount.h>
 
 #include "../kselftest_harness.h"
 
Signature · 1 line
2.39.2
author maintainer
#17 lore raw

PATCH 18/20 asm-generic/io.h: suppress endianness warnings for readq() and writeq()

In reply to Sasha Levin

From: Vladimir Oltean <[email protected]>

[ Upstream commit d564fa1ff19e893e2971d66e5c8f49dc1cdc8ffc ]

Commit c1d55d50139b ("asm-generic/io.h: Fix sparse warnings on big-endian architectures") missed fixing the 64-bit accessors.

Arnd explains in the attached link why the casts are necessary, even if __raw_readq() and __raw_writeq() do not take endian-specific types.

---
 include/asm-generic/io.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
include/asm-generic/io.h +2 -2
index 4c44a29b5e8ef..d78c3056c98f9 100644
@@ -236,7 +236,7 @@ static inline u64 readq(const volatile void __iomem *addr)
 
 	log_read_mmio(64, addr, _THIS_IP_, _RET_IP_);
 	__io_br();
-	val = __le64_to_cpu(__raw_readq(addr));
+	val = __le64_to_cpu((__le64 __force)__raw_readq(addr));
 	__io_ar(val);
 	log_post_read_mmio(val, 64, addr, _THIS_IP_, _RET_IP_);
 	return val;
@@ -287,7 +287,7 @@ static inline void writeq(u64 value, volatile void __iomem *addr)
 {
 	log_write_mmio(value, 64, addr, _THIS_IP_, _RET_IP_);
 	__io_bw();
-	__raw_writeq(__cpu_to_le64(value), addr);
+	__raw_writeq((u64 __force)__cpu_to_le64(value), addr);
 	__io_aw();
 	log_post_write_mmio(value, 64, addr, _THIS_IP_, _RET_IP_);
 }
Signature · 1 line
2.39.2
author maintainer
#19 lore raw

PATCH 20/20 x86/cpu: Add model number for Intel Arrow Lake processor

In reply to Sasha Levin

From: Tony Luck <[email protected]>

[ Upstream commit 81515ecf155a38f3532bf5ddef88d651898df6be ]

Successor to Lunar Lake.

---
 arch/x86/include/asm/intel-family.h | 2 ++
 1 file changed, 2 insertions(+)
arch/x86/include/asm/intel-family.h +2 -0
index cbaf174d8efd9..b3af2d45bbbb5 100644
@@ -125,6 +125,8 @@
 
 #define INTEL_FAM6_LUNARLAKE_M		0xBD
 
+#define INTEL_FAM6_ARROWLAKE		0xC6
+
 /* "Small Core" Processors (Atom/E-Core) */
 
 #define INTEL_FAM6_ATOM_BONNELL		0x1C /* Diamondville, Pineview */
Signature · 1 line
2.39.2
author maintainer
#18 lore raw

PATCH 19/20 asm-generic/io.h: suppress endianness warnings for relaxed accessors

In reply to Sasha Levin

From: Vladimir Oltean <[email protected]>

[ Upstream commit 05d3855b4d21ef3c2df26be1cbba9d2c68915fcb ]

Copy the forced type casts from the normal MMIO accessors to suppress the sparse warnings that point out __raw_readl() returns a native endian word (just like readl()).

---
 include/asm-generic/io.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
include/asm-generic/io.h +6 -6
index d78c3056c98f9..587e7e9b9a375 100644
@@ -319,7 +319,7 @@ static inline u16 readw_relaxed(const volatile void __iomem *addr)
 	u16 val;
 
 	log_read_mmio(16, addr, _THIS_IP_, _RET_IP_);
-	val = __le16_to_cpu(__raw_readw(addr));
+	val = __le16_to_cpu((__le16 __force)__raw_readw(addr));
 	log_post_read_mmio(val, 16, addr, _THIS_IP_, _RET_IP_);
 	return val;
 }
@@ -332,7 +332,7 @@ static inline u32 readl_relaxed(const volatile void __iomem *addr)
 	u32 val;
 
 	log_read_mmio(32, addr, _THIS_IP_, _RET_IP_);
-	val = __le32_to_cpu(__raw_readl(addr));
+	val = __le32_to_cpu((__le32 __force)__raw_readl(addr));
 	log_post_read_mmio(val, 32, addr, _THIS_IP_, _RET_IP_);
 	return val;
 }
@@ -345,7 +345,7 @@ static inline u64 readq_relaxed(const volatile void __iomem *addr)
 	u64 val;
 
 	log_read_mmio(64, addr, _THIS_IP_, _RET_IP_);
-	val = __le64_to_cpu(__raw_readq(addr));
+	val = __le64_to_cpu((__le64 __force)__raw_readq(addr));
 	log_post_read_mmio(val, 64, addr, _THIS_IP_, _RET_IP_);
 	return val;
 }
@@ -366,7 +366,7 @@ static inline void writeb_relaxed(u8 value, volatile void __iomem *addr)
 static inline void writew_relaxed(u16 value, volatile void __iomem *addr)
 {
 	log_write_mmio(value, 16, addr, _THIS_IP_, _RET_IP_);
-	__raw_writew(cpu_to_le16(value), addr);
+	__raw_writew((u16 __force)cpu_to_le16(value), addr);
 	log_post_write_mmio(value, 16, addr, _THIS_IP_, _RET_IP_);
 }
 #endif
@@ -376,7 +376,7 @@ static inline void writew_relaxed(u16 value, volatile void __iomem *addr)
 static inline void writel_relaxed(u32 value, volatile void __iomem *addr)
 {
 	log_write_mmio(value, 32, addr, _THIS_IP_, _RET_IP_);
-	__raw_writel(__cpu_to_le32(value), addr);
+	__raw_writel((u32 __force)__cpu_to_le32(value), addr);
 	log_post_write_mmio(value, 32, addr, _THIS_IP_, _RET_IP_);
 }
 #endif
@@ -386,7 +386,7 @@ static inline void writel_relaxed(u32 value, volatile void __iomem *addr)
 static inline void writeq_relaxed(u64 value, volatile void __iomem *addr)
 {
 	log_write_mmio(value, 64, addr, _THIS_IP_, _RET_IP_);
-	__raw_writeq(__cpu_to_le64(value), addr);
+	__raw_writeq((u64 __force)__cpu_to_le64(value), addr);
 	log_post_write_mmio(value, 64, addr, _THIS_IP_, _RET_IP_);
 }
 #endif
Signature · 1 line
2.39.2