can: dev: add transceiver capabilities to xilinx_can
Subsystems (5)
PATCH 1/1 can: dev: add transceiver capabilities to xilinx_can
Currently the xilinx_can driver does not support adding a phy like the "ti,tcan1043" to its devicetree.
This code makes it possible to add such phy, so that the kernel makes sure that the PHY is in operational state, when the link is set to an "up" state.
--- drivers/net/can/xilinx_can.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
drivers/net/can/xilinx_can.c +20 -0
@@ -28,6 +28,7 @@#include <linux/types.h> #include <linux/can/dev.h> #include <linux/can/error.h> +#include <linux/phy/phy.h> #include <linux/pm_runtime.h> #define DRIVER_NAME "xilinx_can"
@@ -215,6 +216,7 @@ struct xcan_priv {struct clk *bus_clk;struct clk *can_clk;struct xcan_devtype_data devtype; +struct phy *transceiver; };/* CAN Bittiming constants as per Xilinx CAN specs */
@@ -1419,6 +1421,12 @@ static int xcan_open(struct net_device *ndev)struct xcan_priv *priv =netdev_priv (ndev);int ret; + ret =phy_power_on (priv->transceiver); +if (ret) { +netdev_err (ndev,"%s: phy_power_on failed(%d)\n" , __func__, ret); +return ret; + } + ret =pm_runtime_get_sync (priv->dev);if (ret <0 ) { netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
@@ -1461,6 +1469,7 @@ static int xcan_open(struct net_device *ndev) err_irq:free_irq (ndev->irq, ndev); err: +phy_power_off (priv->transceiver);pm_runtime_put (priv->dev);return ret;
@@ -1482,6 +1491,7 @@ static int xcan_close(struct net_device *ndev)free_irq (ndev->irq, ndev);close_candev (ndev); +phy_power_off (priv->transceiver);pm_runtime_put (priv->dev);return 0 ;
@@ -1713,6 +1723,7 @@ static int xcan_probe(struct platform_device *pdev) {struct net_device *ndev;struct xcan_priv *priv; +struct phy *transceiver;const struct of_device_id *of_id;const struct xcan_devtype_data *devtype = &xcan_axi_data;void __iomem *addr;
@@ -1843,6 +1854,14 @@ static int xcan_probe(struct platform_device *pdev) goto err_free; } + transceiver =devm_phy_optional_get (&pdev->dev,NULL ); +if (IS_ERR (transceiver)) { + ret =PTR_ERR (transceiver); +dev_err_probe (&pdev->dev, ret,"failed to get phy\n" ); + goto err_free; + } + priv->transceiver = transceiver; + priv->write_reg = xcan_write_reg_le; priv->read_reg = xcan_read_reg_le;
@@ -1869,6 +1888,7 @@ static int xcan_probe(struct platform_device *pdev) goto err_disableclks; } +of_can_transceiver (ndev);pm_runtime_put (&pdev->dev);if (priv->devtype.flags &XCAN_FLAG_CANFD_2 ) {
Signature · 1 line
2.34.1
Hey everyone,
is there anything I can do to get this merged?
Is there anything missing?
Greetings,
Marcel
Quoted 97 lines
Marcel Hellwig <[email protected]> hat am 17.04.2023 10:52 CEST geschrieben:
Currently the
xilinx_candriver does not support adding a phy like the "ti,tcan1043" to its devicetree.This code makes it possible to add such phy, so that the kernel makes sure that the PHY is in operational state, when the link is set to an "up" state.
Signed-off-by Marcel Hellwig <[email protected]>--- drivers/net/can/xilinx_can.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)drivers/net/can/xilinx_can.c +20
-0@@ -28,6 +28,7 @@#include <linux/types.h> #include <linux/can/dev.h> #include <linux/can/error.h> +#include <linux/phy/phy.h> #include <linux/pm_runtime.h> #define DRIVER_NAME "xilinx_can"@@ -215,6 +216,7 @@ struct xcan_priv {struct clk *bus_clk;struct clk *can_clk;struct xcan_devtype_data devtype; +struct phy *transceiver; };/* CAN Bittiming constants as per Xilinx CAN specs */ @@ -1419,6 +1421,12 @@ static int xcan_open(struct net_device *ndev)struct xcan_priv *priv =netdev_priv (ndev);int ret; + ret =phy_power_on (priv->transceiver); +if (ret) { +netdev_err (ndev,"%s: phy_power_on failed(%d)\n" , __func__, ret); +return ret; + } + ret =pm_runtime_get_sync (priv->dev);if (ret <0 ) { netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",@@ -1461,6 +1469,7 @@ static int xcan_open(struct net_device *ndev) err_irq:free_irq (ndev->irq, ndev); err: +phy_power_off (priv->transceiver);pm_runtime_put (priv->dev);return ret;@@ -1482,6 +1491,7 @@ static int xcan_close(struct net_device *ndev)free_irq (ndev->irq, ndev);close_candev (ndev); +phy_power_off (priv->transceiver);pm_runtime_put (priv->dev);return 0 ;@@ -1713,6 +1723,7 @@ static int xcan_probe(struct platform_device *pdev) {struct net_device *ndev;struct xcan_priv *priv; +struct phy *transceiver;const struct of_device_id *of_id;const struct xcan_devtype_data *devtype = &xcan_axi_data;void __iomem *addr;@@ -1843,6 +1854,14 @@ static int xcan_probe(struct platform_device *pdev) goto err_free; } + transceiver =devm_phy_optional_get (&pdev->dev,NULL ); +if (IS_ERR (transceiver)) { + ret =PTR_ERR (transceiver); +dev_err_probe (&pdev->dev, ret,"failed to get phy\n" ); + goto err_free; + } + priv->transceiver = transceiver; + priv->write_reg = xcan_write_reg_le; priv->read_reg = xcan_read_reg_le;@@ -1869,6 +1888,7 @@ static int xcan_probe(struct platform_device *pdev) goto err_disableclks; } +of_can_transceiver (ndev);pm_runtime_put (&pdev->dev);if (priv->devtype.flags &XCAN_FLAG_CANFD_2 ) {Signature · 1 line
2.34.1
Hi Marcel,
Style check only (I am not yet familiar enough with the devicetree).
Quoted 33 lines · Marcel Hellwig
Currently the
xilinx_candriver does not support adding a phy like the "ti,tcan1043" to its devicetree.This code makes it possible to add such phy, so that the kernel makes sure that the PHY is in operational state, when the link is set to an "up" state.
Signed-off-by Marcel Hellwig <[email protected]>--- drivers/net/can/xilinx_can.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)drivers/net/can/xilinx_can.c +2
-0@@ -28,6 +28,7 @@#include <linux/types.h> #include <linux/can/dev.h> #include <linux/can/error.h> +#include <linux/phy/phy.h> #include <linux/pm_runtime.h> #define DRIVER_NAME "xilinx_can"@@ -215,6 +216,7 @@ struct xcan_priv {struct clk *bus_clk;struct clk *can_clk;struct xcan_devtype_data devtype; +struct phy *transceiver; };/* CAN Bittiming constants as per Xilinx CAN specs */
drivers/net/can/xilinx_can.c static int xcan_open(struct net_device *ndev) · line 1426
Quoted 6 lines
drivers/net/can/xilinx_can.c +3
-0@@ -1419,6 +1421,12 @@ static int xcan_open(struct net_device *ndev)struct xcan_priv *priv =netdev_priv (ndev);int ret; + ret =phy_power_on (priv->transceiver); +if (ret) { +netdev_err (ndev,"%s: phy_power_on failed(%d)\n" , __func__, ret);
From the Linux kernel coding style:
Printing numbers in parentheses (%d) adds no value and should be avoided.
Also consider %pe to print the mnemotechnic instead of the value:
netdev_err(ndev, "%s: phy_power_on failed: %pe\n", __func__,
ERR_PTR(ret));
drivers/net/can/xilinx_can.c static int xcan_open(struct net_device *ndev) · line 1432
Quoted 6 lines
drivers/net/can/xilinx_can.c +3
-0+return ret; + } + ret =pm_runtime_get_sync (priv->dev);if (ret <0 ) { netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
It is up to you, but bonus points if you send a clean-up patch to fix the existing log messages.
Quoted 50 lines
drivers/net/can/xilinx_can.c +12
-1@@ -1461,6 +1469,7 @@ static int xcan_open(struct net_device *ndev) err_irq:free_irq (ndev->irq, ndev); err: +phy_power_off (priv->transceiver);pm_runtime_put (priv->dev);return ret;@@ -1482,6 +1491,7 @@ static int xcan_close(struct net_device *ndev)free_irq (ndev->irq, ndev);close_candev (ndev); +phy_power_off (priv->transceiver);pm_runtime_put (priv->dev);return 0 ;@@ -1713,6 +1723,7 @@ static int xcan_probe(struct platform_device *pdev) {struct net_device *ndev;struct xcan_priv *priv; +struct phy *transceiver;const struct of_device_id *of_id;const struct xcan_devtype_data *devtype = &xcan_axi_data;void __iomem *addr;@@ -1843,6 +1854,14 @@ static int xcan_probe(struct platform_device *pdev) goto err_free; } + transceiver =devm_phy_optional_get (&pdev->dev,NULL ); +if (IS_ERR (transceiver)) { + ret =PTR_ERR (transceiver); +dev_err_probe (&pdev->dev, ret,"failed to get phy\n" ); + goto err_free; + } + priv->transceiver = transceiver; + priv->write_reg = xcan_write_reg_le; priv->read_reg = xcan_read_reg_le;@@ -1869,6 +1888,7 @@ static int xcan_probe(struct platform_device *pdev) goto err_disableclks; } +of_can_transceiver (ndev);pm_runtime_put (&pdev->dev);if (priv->devtype.flags &XCAN_FLAG_CANFD_2 ) { --2.34.1
Marc Kleine-Budde
maintainerQuoted 4 lines · On 22.05.2023 09:24:17, [email protected] wrote:
Hey everyone,
is there anything I can do to get this merged?
Is there anything missing?
Looks good, while applying I'v moved the phy_power_off() after the pm_runtime_put() to make it symmetric with respect to xcan_open().
regards,
Marc
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung Nürnberg | Phone: +49-5121-206917-129 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Marc Kleine-Budde
maintainerQuoted 47 lines · Vincent MAILHOL
Hi Marcel,
Style check only (I am not yet familiar enough with the devicetree).
Quoted 33 lines · Marcel Hellwig
Currently the
xilinx_candriver does not support adding a phy like the "ti,tcan1043" to its devicetree.This code makes it possible to add such phy, so that the kernel makes sure that the PHY is in operational state, when the link is set to an "up" state.
Signed-off-by Marcel Hellwig <[email protected]>--- drivers/net/can/xilinx_can.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)drivers/net/can/xilinx_can.c +2
-0@@ -28,6 +28,7 @@#include <linux/types.h> #include <linux/can/dev.h> #include <linux/can/error.h> +#include <linux/phy/phy.h> #include <linux/pm_runtime.h> #define DRIVER_NAME "xilinx_can"@@ -215,6 +216,7 @@ struct xcan_priv {struct clk *bus_clk;struct clk *can_clk;struct xcan_devtype_data devtype; +struct phy *transceiver; };/* CAN Bittiming constants as per Xilinx CAN specs */ drivers/net/can/xilinx_can.c static int xcan_open(struct net_device *ndev) · line 1426
Quoted 6 lines
drivers/net/can/xilinx_can.c +3
-0@@ -1419,6 +1421,12 @@ static int xcan_open(struct net_device *ndev)struct xcan_priv *priv =netdev_priv (ndev);int ret; + ret =phy_power_on (priv->transceiver); +if (ret) { +netdev_err (ndev,"%s: phy_power_on failed(%d)\n" , __func__, ret);From the Linux kernel coding style:
Quoted 7 lines
Printing numbers in parentheses (%d) adds no value and should be avoided.
Also consider %pe to print the mnemotechnic instead of the value:
netdev_err(ndev, "%s: phy_power_on failed: %pe\n", __func__,
ERR_PTR(ret));
Good point. phy_power_on() already writes an error message:
| https://elixir.bootlin.com/linux/v6.3/source/drivers/phy/phy-core.c#L343
I'll remove that from this patch.
Marc
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung Nürnberg | Phone: +49-5121-206917-129 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Marc Kleine-Budde
maintainerQuoted 8 lines · Marc Kleine-Budde
Quoted 4 lines · On 22.05.2023 09:24:17, [email protected] wrote:
Hey everyone,
is there anything I can do to get this merged?
Is there anything missing?Looks good, while applying I'v moved the
phy_power_off()after thepm_runtime_put()to make it symmetric with respect toxcan_open().
Also fixed that warning:
| drivers/net/can/xilinx_can.c:220: warning: Function parameter or member 'transceiver' not described in 'xcan_priv'
Marc
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung Nürnberg | Phone: +49-5121-206917-129 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |