Skip to contentSkip to conversation

bpf: Improve verifier u32 scalar equality checking

PATCH Applied Yonghong Song 2 participants 3 messages Apr 17, 2023

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 bpf: Improve verifier u32 scalar equality checking

In [1], I tried to remove bpf-specific codes to prevent certain llvm optimizations, and add llvm TTI (target transform info) hooks to prevent those optimizations. During this process, I found
if I enable llvm SimplifyCFG:shouldFoldTwoEntryPHINode transformation, I will hit the following verification failure with selftests:

...
8: (18) r1 = 0xffffc900001b2230 ; R1_w=map_value(off=560,ks=4,vs=564,imm=0)
10: (61) r1 = *(u32 *)(r1 +0) ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (skb->tstamp == EGRESS_ENDHOST_MAGIC)
11: (79) r2 = *(u64 *)(r6 +152) ; R2_w=scalar() R6=ctx(off=0,imm=0)
; if (skb->tstamp == EGRESS_ENDHOST_MAGIC)
12: (55) if r2 != 0xb9fbeef goto pc+10 ; R2_w=195018479
13: (bc) w2 = w1 ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (test < __NR_TESTS)
14: (a6) if w1 < 0x9 goto pc+1 16: R0=2 R1_w=scalar(umax=8,var_off=(0x0; 0xf)) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R6=ctx(off=0,imm=0) R10=fp0 ;

  16: (27) r2 *= 28                     ; R2_w=scalar(umax=120259084260,var_off=(0x0; 0x1ffffffffc),s32_max=2147483644,u32_max=-4)
  17: (18) r3 = 0xffffc900001b2118      ; R3_w=map_value(off=280,ks=4,vs=564,imm=0)
  19: (0f) r3 += r2                     ; R2_w=scalar(umax=120259084260,var_off=(0x0; 0x1ffffffffc),s32_max=2147483644,u32_max=-4) R3_w=map_value(off=280,ks=4,vs=564,umax=120259084260,var_off=(0x0; 0x1ffffffffc),s32_max=2147483644,u32_max=-4)

20: (61) r2 = *(u32 *)(r3 +0)
R3 unbounded memory access, make sure to bounds check any such access
processed 97 insns (limit 1000000) max_states_per_insn 1 total_states 10 peak_states 10 mark_read 6 -- END PROG LOAD LOG --
libbpf: prog 'ingress_fwdns_prio100': failed to load: -13
libbpf: failed to load object 'test_tc_dtime'
libbpf: failed to load BPF skeleton 'test_tc_dtime': -13
...

At insn 14, with condition 'w1 < 9', register r1 is changed from an arbitrary u32 value to scalar(umax=8,var_off=(0x0; 0xf)). Register r2, however, remains as an arbitrary u32 value. Current verifier won't claim r1/r2 equality if the previous mov is alu32 ('w2 = w1').

If r1 upper 32bit value is not 0, we indeed cannot clamin r1/r2 equality after 'w2 = w1'. But in this particular case, we know r1 upper 32bit value is 0, so it is safe to claim r1/r2 equality. This patch exactly did this. For a 32bit subreg mov, if the src register upper 32bit is 0, it is okay to claim equality between src and dst registers.

With this patch, the above verification sequence becomes

...
8: (18) r1 = 0xffffc9000048e230 ; R1_w=map_value(off=560,ks=4,vs=564,imm=0)
10: (61) r1 = *(u32 *)(r1 +0) ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (skb->tstamp == EGRESS_ENDHOST_MAGIC)
11: (79) r2 = *(u64 *)(r6 +152) ; R2_w=scalar() R6=ctx(off=0,imm=0)
; if (skb->tstamp == EGRESS_ENDHOST_MAGIC)
12: (55) if r2 != 0xb9fbeef goto pc+10 ; R2_w=195018479
13: (bc) w2 = w1 ; R1_w=scalar(id=6,umax=4294967295,var_off=(0x0; 0xffffffff)) R2_w=scalar(id=6,umax=4294967295,var_off=(0x0; 0xffffffff))
; if (test < __NR_TESTS)
14: (a6) if w1 < 0x9 goto pc+1 ; R1_w=scalar(id=6,umin=9,umax=4294967295,var_off=(0x0; 0xffffffff))
...
from 14 to 16: R0=2 R1_w=scalar(id=6,umax=8,var_off=(0x0; 0xf)) R2_w=scalar(id=6,umax=8,var_off=(0x0; 0xf)) R6=ctx(off=0,imm=0) R10=fp0
16: (27) r2 *= 28 ; R2_w=scalar(umax=224,var_off=(0x0; 0xfc))
17: (18) r3 = 0xffffc9000048e118 ; R3_w=map_value(off=280,ks=4,vs=564,imm=0)
19: (0f) r3 += r2
20: (61) r2 = *(u32 *)(r3 +0) ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R3_w=map_value(off=280,ks=4,vs=564,umax=224,var_off=(0x0; 0xfc),s32_max=252,u32_max=252)
...

and eventually the bpf program can be verified successfully.

[1] https://reviews.llvm.org/D147968

---
 kernel/bpf/verifier.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +7 -2
index 5dae11ee01c3..1e05355facdc 100644
@@ -12421,12 +12421,17 @@ static int check_alu_op(struct bpf_verifier_env *env, struct bpf_insn *insn)
 						insn->src_reg);
 					return -EACCES;
 				} else if (src_reg->type == SCALAR_VALUE) {
+					bool is_src_reg_u32 = src_reg->umax_value <= U32_MAX;
+
+					if (is_src_reg_u32 && !src_reg->id)
+						src_reg->id = ++env->id_gen;
 					copy_register_state(dst_reg, src_reg);
-					/* Make sure ID is cleared otherwise
+					/* Make sure ID is cleared if src_reg is not in u32 range otherwise
 					 * dst_reg min/max could be incorrectly
 					 * propagated into src_reg by find_equal_scalars()
 					 */
-					dst_reg->id = 0;
+					if (!is_src_reg_u32)
+						dst_reg->id = 0;
 					dst_reg->live |= REG_LIVE_WRITTEN;
 					dst_reg->subreg_def = env->insn_idx + 1;
 				} else {
Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 2/2 selftests/bpf: Add a selftest for checking subreg equality

Add a selftest to ensure subreg equality if source register upper 32bit is 0. Without previous patch, the test will fail verification.

---
 .../selftests/bpf/prog_tests/verifier.c       |  2 +
 .../selftests/bpf/progs/verifier_reg_equal.c  | 58 +++++++++++++++++++
 2 files changed, 60 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/progs/verifier_reg_equal.c

v1 -> v2:
- Add some comments for the test
- Add a negative test

tools/testing/selftests/bpf/prog_tests/verifier.c +2 -0
index 73dff693d411..25bc8958dbfe 100644
@@ -31,6 +31,7 @@
 #include "verifier_meta_access.skel.h"
 #include "verifier_raw_stack.skel.h"
 #include "verifier_raw_tp_writable.skel.h"
+#include "verifier_reg_equal.skel.h"
 #include "verifier_ringbuf.skel.h"
 #include "verifier_spill_fill.skel.h"
 #include "verifier_stack_ptr.skel.h"
@@ -95,6 +96,7 @@ void test_verifier_masking(void)              { RUN(verifier_masking); }
 void test_verifier_meta_access(void)          { RUN(verifier_meta_access); }
 void test_verifier_raw_stack(void)            { RUN(verifier_raw_stack); }
 void test_verifier_raw_tp_writable(void)      { RUN(verifier_raw_tp_writable); }
+void test_verifier_reg_equal(void)            { RUN(verifier_reg_equal); }
 void test_verifier_ringbuf(void)              { RUN(verifier_ringbuf); }
 void test_verifier_spill_fill(void)           { RUN(verifier_spill_fill); }
 void test_verifier_stack_ptr(void)            { RUN(verifier_stack_ptr); }
tools/testing/selftests/bpf/progs/verifier_reg_equal.c new file +58 -0

58 lines not on this page · raw message

Signature · 1 line
2.34.1
#2 lore raw
In reply to Yonghong Song
This series was applied to bpf/bpf-next.git (master) by Alexei Starovoitov <[email protected]>:

Hello:

This series was applied to bpf/bpf-next.git (master) by Alexei Starovoitov <[email protected]>:

Quoted 29 lines · On Mon, 17 Apr 2023 15:21:34 -0700 you wrote:

In [1], I tried to remove bpf-specific codes to prevent certain llvm optimizations, and add llvm TTI (target transform info) hooks to prevent those optimizations. During this process, I found
if I enable llvm SimplifyCFG:shouldFoldTwoEntryPHINode transformation, I will hit the following verification failure with selftests:

...
8: (18) r1 = 0xffffc900001b2230 ; R1_w=map_value(off=560,ks=4,vs=564,imm=0)
10: (61) r1 = *(u32 *)(r1 +0) ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (skb->tstamp == EGRESS_ENDHOST_MAGIC)
11: (79) r2 = *(u64 *)(r6 +152) ; R2_w=scalar() R6=ctx(off=0,imm=0)
; if (skb->tstamp == EGRESS_ENDHOST_MAGIC)
12: (55) if r2 != 0xb9fbeef goto pc+10 ; R2_w=195018479
13: (bc) w2 = w1 ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (test < __NR_TESTS)
14: (a6) if w1 < 0x9 goto pc+1 16: R0=2 R1_w=scalar(umax=8,var_off=(0x0; 0xf)) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R6=ctx(off=0,imm=0) R10=fp0 ;

  16: (27) r2 *= 28                     ; R2_w=scalar(umax=120259084260,var_off=(0x0; 0x1ffffffffc),s32_max=2147483644,u32_max=-4)
  17: (18) r3 = 0xffffc900001b2118      ; R3_w=map_value(off=280,ks=4,vs=564,imm=0)
  19: (0f) r3 += r2                     ; R2_w=scalar(umax=120259084260,var_off=(0x0; 0x1ffffffffc),s32_max=2147483644,u32_max=-4) R3_w=map_value(off=280,ks=4,vs=564,umax=120259084260,var_off=(0x0; 0x1ffffffffc),s32_max=2147483644,u32_max=-4)

20: (61) r2 = *(u32 *)(r3 +0)
R3 unbounded memory access, make sure to bounds check any such access
processed 97 insns (limit 1000000) max_states_per_insn 1 total_states 10 peak_states 10 mark_read 6 -- END PROG LOAD LOG --
libbpf: prog 'ingress_fwdns_prio100': failed to load: -13
libbpf: failed to load object 'test_tc_dtime'
libbpf: failed to load BPF skeleton 'test_tc_dtime': -13
...

Quoted 1 line

[...]

Here is the summary with links:
- [bpf-next,v2,1/2] bpf: Improve verifier u32 scalar equality checking

    https://git.kernel.org/bpf/bpf-next/c/3be49f79555e
  - [bpf-next,v2,2/2] selftests/bpf: Add a selftest for checking subreg equality
    https://git.kernel.org/bpf/bpf-next/c/49859de997c3

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html