bonding: add software tx timestamping support
Subsystems (4)
PATCH v5 1/1 bonding: add software tx timestamping support
Currently, bonding only obtain the timestamp (ts) information of the active slave, which is available only for modes 1, 5, and 6. For other modes, bonding only has software rx timestamping support.
However, some users who use modes such as LACP also want tx timestamp support. To address this issue, let's check the ts information of each slave. If all slaves support tx timestamping, we can enable tx timestamping support for the bond.
Add a note that the get_ts_info may be called with RCU, or rtnl or reference on the device in ethtool.h>
---
v5: remove ASSERT_RTNL since bond_ethtool_get_ts_info could be called
without RTNL. Update ethtool kdoc.
v4: add ASSERT_RTNL to make sure bond_ethtool_get_ts_info() called via
RTNL. Only check _TX_SOFTWARE for the slaves.
v3: remove dev_hold/dev_put. remove the '\' for line continuation.
v2: check each slave's ts info to make sure bond support sw tx
timestamping
--- drivers/net/bonding/bond_main.c | 30 ++++++++++++++++++++++++++++++ include/linux/ethtool.h | 1 + 2 files changed, 31 insertions(+)
drivers/net/bonding/bond_main.c +30 -0
@@ -5696,9 +5696,13 @@ static int bond_ethtool_get_ts_info(struct net_device *bond_dev, struct ethtool_ts_info *info) {struct bonding *bond =netdev_priv (bond_dev); +struct ethtool_ts_info ts_info;const struct ethtool_ops *ops;struct net_device *real_dev; +bool sw_tx_support = false;struct phy_device *phydev; +struct list_head *iter; +struct slave *slave;int ret =0 ;rcu_read_lock ();
@@ -5717,10 +5721,36 @@ static int bond_ethtool_get_ts_info(struct net_device *bond_dev, ret = ops->get_ts_info (real_dev, info); goto out; } + }else { +/* Check if all slaves support software tx timestamping */ +rcu_read_lock (); +bond_for_each_slave_rcu (bond, slave, iter) { + ret =-1 ; + ops = slave->dev->ethtool_ops; + phydev = slave->dev->phydev; + +if (phy_has_tsinfo (phydev)) + ret =phy_ts_info (phydev, &ts_info); +else if (ops->get_ts_info) + ret = ops->get_ts_info (slave->dev, &ts_info); + +if (!ret && (ts_info.so_timestamping &SOF_TIMESTAMPING_TX_SOFTWARE )) { + sw_tx_support = true; +continue ; + } + + sw_tx_support = false; +break ; + } +rcu_read_unlock (); } + ret =0 ; info->so_timestamping =SOF_TIMESTAMPING_RX_SOFTWARE |SOF_TIMESTAMPING_SOFTWARE ; +if (sw_tx_support) + info->so_timestamping |=SOF_TIMESTAMPING_TX_SOFTWARE ; + info->phc_index =-1 ; out:
include/linux/ethtool.h +1 -0
@@ -711,6 +711,7 @@ struct ethtool_mm_stats {* @get_dump_data: Get dump data. * @set_dump: Set dump specific flags to the device. * @get_ts_info: Get the time stamping and PTP hardware clock capabilities. +* It may be called with RCU, or rtnl or reference on the device. * Drivers supporting transmit time stamps in software should set this to * ethtool_op_get_ts_info(). * @get_module_info: Get the size and type of the eeprom contained within
Signature · 1 line
2.38.1
Jakub Kicinski
maintainerQuoted 9 lines · On Tue, 18 Apr 2023 11:48:41 +0800 Hangbin Liu wrote:
Currently, bonding only obtain the timestamp (ts) information of the active slave, which is available only for modes 1, 5, and 6. For other modes, bonding only has software rx timestamping support.
However, some users who use modes such as LACP also want tx timestamp support. To address this issue, let's check the ts information of each slave. If all slaves support tx timestamping, we can enable tx timestamping support for the bond.
Quoted 8 lines
Add a note that the
get_ts_infomay be called with RCU, or rtnl or reference on the device inethtool.h>Suggested-by Miroslav Lichvar <[email protected]>Signed-off-by Hangbin Liu <[email protected]>---
v5: removeASSERT_RTNLsincebond_ethtool_get_ts_infocould be called
without RTNL. Update ethtool kdoc.
I'll apply Jay's ack from v4 since these are not substantial changes. Thanks!
Quoted 13 lines · Jakub Kicinski
Quoted 12 lines · On Tue, 18 Apr 2023 11:48:41 +0800 Hangbin Liu wrote:
Currently, bonding only obtain the timestamp (ts) information of the active slave, which is available only for modes 1, 5, and 6. For other modes, bonding only has software rx timestamping support.
However, some users who use modes such as LACP also want tx timestamp support. To address this issue, let's check the ts information of each slave. If all slaves support tx timestamping, we can enable tx timestamping support for the bond.
Add a note that the
get_ts_infomay be called with RCU, or rtnl or reference on the device inethtool.h>
Quoted 8 lines
Quoted 5 lines
Suggested-by Miroslav Lichvar <[email protected]>Signed-off-by Hangbin Liu <[email protected]>---
v5: removeASSERT_RTNLsincebond_ethtool_get_ts_infocould be called
without RTNL. Update ethtool kdoc.I'll apply Jay's ack from v4 since these are not substantial changes. Thanks!
Sorry, not sure if I missed something. bond_ethtool_get_ts_info() could be called without RTNL. And we have ASSERT_RTNL() in v4.
Thanks
Hangbin
Jakub Kicinski
maintainerQuoted 5 lines · On Wed, 19 Apr 2023 12:09:17 +0800 Hangbin Liu wrote:
Quoted 2 lines
I'll apply Jay's ack from v4 since these are not substantial changes. Thanks!
Sorry, not sure if I missed something.
bond_ethtool_get_ts_info()could be called without RTNL. And we haveASSERT_RTNL()in v4.
Are there any documented best practices on when to keep an ack? I'm not aware of such a doc, it's a bit of a gray zone. IMHO the changes here weren't big enough to drop Jay's tag.
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 10 lines · On Tue, 18 Apr 2023 11:48:41 +0800 you wrote:
Currently, bonding only obtain the timestamp (ts) information of the active slave, which is available only for modes 1, 5, and 6. For other modes, bonding only has software rx timestamping support.
However, some users who use modes such as LACP also want tx timestamp support. To address this issue, let's check the ts information of each slave. If all slaves support tx timestamping, we can enable tx timestamping support for the bond.
[...]
Here is the summary with links:
- [PATCHv5,net-next] bonding: add software tx timestamping support
https://git.kernel.org/netdev/net-next/c/980f0799a15c
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
Quoted 10 lines · Jakub Kicinski
Quoted 5 lines · On Wed, 19 Apr 2023 12:09:17 +0800 Hangbin Liu wrote:
Quoted 2 lines
I'll apply Jay's ack from v4 since these are not substantial changes. Thanks!
Sorry, not sure if I missed something.
bond_ethtool_get_ts_info()could be called without RTNL. And we haveASSERT_RTNL()in v4.Are there any documented best practices on when to keep an ack? I'm not aware of such a doc, it's a bit of a gray zone. IMHO the changes here weren't big enough to drop Jay's tag.
I don't know of any such documents, but just to clarify for
posterity, I'm fine with having my ack on the patch.
-J
---
-Jay Vosburgh, [email protected]
Quoted 10 lines · Jakub Kicinski
Quoted 5 lines · On Wed, 19 Apr 2023 12:09:17 +0800 Hangbin Liu wrote:
Quoted 2 lines
I'll apply Jay's ack from v4 since these are not substantial changes. Thanks!
Sorry, not sure if I missed something.
bond_ethtool_get_ts_info()could be called without RTNL. And we haveASSERT_RTNL()in v4.Are there any documented best practices on when to keep an ack? I'm not aware of such a doc, it's a bit of a gray zone. IMHO the changes here weren't big enough to drop Jay's tag.
I don't know either. Some times I also struggle on whether I should keep the ack tag, then I drop the tag just in case the reviewer doesn't agree with my change.
Anyway, thanks a lot for your patient review and comments.
Regards
Hangbin