Skip to contentSkip to conversation

modules/firmware: add a new option to denote a firmware group to choose one.

PATCH In review Dave Airlie 4 participants 11 messages Apr 19, 2023 – May 24, 2023 Module support

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 modules/firmware: add a new option to denote a firmware group to choose one.

From: Dave Airlie <[email protected]>

This adds a tag that will go into the module info, only one firmware from the group given needs to be available for this driver to work. This allows dracut to avoid adding in firmware that aren't needed.

This just brackets a module list in the modinfo, the modules in the list will get entries in reversed order so the last module in the list is the preferred one.

The corresponding dracut code it at:
https://github.com/dracutdevs/dracut/pull/2309

---
 include/linux/module.h | 2 ++
 1 file changed, 2 insertions(+)
include/linux/module.h +2 -0
index 4435ad9439ab..f02448ed5e2b 100644
@@ -289,6 +289,8 @@ extern typeof(name) __mod_##type##__##name##_device_table		\
  * files require multiple MODULE_FIRMWARE() specifiers */
 #define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
 
+#define MODULE_FIRMWARE_GROUP_ONLY_ONE(_grpname) MODULE_INFO(firmware_group_only_one, _grpname)
+
 #define MODULE_IMPORT_NS(ns)	MODULE_INFO(import_ns, __stringify(ns))
 
 struct notifier_block;
Signature · 1 line
2.39.2
#1 lore raw
Quoted 6 lines · Dave Airlie

From: Dave Airlie <[email protected]>

This adds a tag that will go into the module info, only one firmware from the group given needs to be available for this driver to work. This allows dracut to avoid adding in firmware that aren't needed.

Quoted 6 lines

This just brackets a module list in the modinfo, the modules in the list will get entries in reversed order so the last module in the list is the preferred one.

The corresponding dracut code it at:
https://github.com/dracutdevs/dracut/pull/2309

it would be good to have the example usage in the commit message here so it can be easily checked as reference for other drivers.

I don't think we ever had any ordering in modinfo being relevant for other things. Considering the use case and that we could also use a similar thing for i915 / xe modules wrt to the major version, couldn't we do something like below?

	MODULE_FIRMWARE_GROUP("nvidia/ga106/gsp/gsp");
	MODULE_FIRMWARE("nvidia/ga106/gsp/gsp-5258902.bin");
	MODULE_FIRMWARE("nvidia/ga106/gsp/gsp-5303002.bin");

so the group is created by startswith() rather than by the order the modinfo appears in the elf section. In i915 we'd have:

MODULE_FIRMWARE_GROUP("i915/tgl_guc")

There is still an order the kernel would probably like: latest version. But then it's an order only among things with the same key.

Lucas De Marchi

Quoted 25 lines

---
include/linux/module.h | 2 ++

1 file changed, 2 insertions(+)
include/linux/module.h +2 -0
index 4435ad9439ab..f02448ed5e2b 100644
@@ -289,6 +289,8 @@ extern typeof(name) __mod_##type##__##name##_device_table		\
 * files require multiple MODULE_FIRMWARE() specifiers */
 #define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
 
+#define MODULE_FIRMWARE_GROUP_ONLY_ONE(_grpname) MODULE_INFO(firmware_group_only_one, _grpname)
+
 #define MODULE_IMPORT_NS(ns)	MODULE_INFO(import_ns, __stringify(ns))
 
 struct notifier_block;
Signature · 1 line
2.39.2
#2 lore raw
Quoted 12 lines · Lucas De Marchi
Quoted 10 lines · Dave Airlie

From: Dave Airlie <[email protected]>

This adds a tag that will go into the module info, only one firmware from the group given needs to be available for this driver to work. This allows dracut to avoid adding in firmware that aren't needed.

This just brackets a module list in the modinfo, the modules in the list will get entries in reversed order so the last module in the list is the preferred one.

Quoted 5 lines
Quoted 2 lines

The corresponding dracut code it at:
https://github.com/dracutdevs/dracut/pull/2309

it would be good to have the example usage in the commit message here so it can be easily checked as reference for other drivers.

Good point.

Quoted 6 lines

I don't think we ever had any ordering in modinfo being relevant for other things. Considering the use case and that we could also use a similar thing for i915 / xe modules wrt to the major version, couldn't we do something like below?

Quoted 6 lines
        MODULE_FIRMWARE_GROUP("nvidia/ga106/gsp/gsp");
        MODULE_FIRMWARE("nvidia/ga106/gsp/gsp-5258902.bin");
        MODULE_FIRMWARE("nvidia/ga106/gsp/gsp-5303002.bin");

so the group is created by startswith() rather than by the order the modinfo appears in the elf section. In i915 we'd have:

The way userspace parses these is reverse order, and it doesn't see the GROUP until after the FIRMWARE, so this can't work, as it already will have included all the ones below, hence why I bracketed top and bottom with a group.

Quoted 5 lines

MODULE_FIRMWARE_GROUP("i915/tgl_guc")

There is still an order the kernel would probably like: latest version. But then it's an order only among things with the same key.

Dave.

#3 lore raw
Quoted 27 lines · Dave Airlie
Quoted 12 lines · Lucas De Marchi
Quoted 10 lines · Dave Airlie

From: Dave Airlie <[email protected]>

This adds a tag that will go into the module info, only one firmware from the group given needs to be available for this driver to work. This allows dracut to avoid adding in firmware that aren't needed.

This just brackets a module list in the modinfo, the modules in the list will get entries in reversed order so the last module in the list is the preferred one.

Quoted 5 lines
Quoted 2 lines

The corresponding dracut code it at:
https://github.com/dracutdevs/dracut/pull/2309

it would be good to have the example usage in the commit message here so it can be easily checked as reference for other drivers.

Good point.

Quoted 6 lines

I don't think we ever had any ordering in modinfo being relevant for other things. Considering the use case and that we could also use a similar thing for i915 / xe modules wrt to the major version, couldn't we do something like below?

Quoted 8 lines
Quoted 6 lines
        MODULE_FIRMWARE_GROUP("nvidia/ga106/gsp/gsp");
        MODULE_FIRMWARE("nvidia/ga106/gsp/gsp-5258902.bin");
        MODULE_FIRMWARE("nvidia/ga106/gsp/gsp-5303002.bin");

so the group is created by startswith() rather than by the order the modinfo appears in the elf section. In i915 we'd have:

The way userspace parses these is reverse order, and it doesn't see

the main issue I have with it is that it relies on a order that is implicit rather than intended. The order comes from how the .modinfo ELF section is assembled together... so the fact that your call to kmod_module_get_info() returns a list with the keys in the reverse order of the MODULE_FIRMWARE() definitions, is basically because the compiler toolchain did it did that way.

It's worse when those sections come from different compilation units as the order then is not predictable and can easily break with changes to the build infra if the files are linked in different order.

I think the grouping thing here would only be supported with firmware defined on the same compilation unit, but it's something to keep in mind and document.

Quoted 3 lines

the GROUP until after the FIRMWARE, so this can't work, as it already will have included all the ones below, hence why I bracketed top and bottom with a group.

well... that is something that can be adapted easily by using a 2 pass approach, filtering out the list based on the groups.

I agree that yours is simpler though. If we can rely on the order produced by the compiler and we document the expectations of MODULE_FIRMWARE_GROUP_ONLY_ONE, then I believe we can stay with the simpler approach.

Luis, any thoughts here?

thanks
Lucas De Marchi

Quoted 8 lines
Quoted 6 lines

MODULE_FIRMWARE_GROUP("i915/tgl_guc")

There is still an order the kernel would probably like: latest version. But then it's an order only among things with the same key.

Dave.

maintainer
#4 lore raw
Quoted 44 lines · Lucas De Marchi
Quoted 27 lines · Dave Airlie
Quoted 12 lines · Lucas De Marchi
Quoted 10 lines · Dave Airlie

From: Dave Airlie <[email protected]>

This adds a tag that will go into the module info, only one firmware from the group given needs to be available for this driver to work. This allows dracut to avoid adding in firmware that aren't needed.

This just brackets a module list in the modinfo, the modules in the list will get entries in reversed order so the last module in the list is the preferred one.

Quoted 5 lines
Quoted 2 lines

The corresponding dracut code it at:
https://github.com/dracutdevs/dracut/pull/2309

it would be good to have the example usage in the commit message here so it can be easily checked as reference for other drivers.

Good point.

Quoted 6 lines

I don't think we ever had any ordering in modinfo being relevant for other things. Considering the use case and that we could also use a similar thing for i915 / xe modules wrt to the major version, couldn't we do something like below?

Quoted 8 lines
Quoted 6 lines
        MODULE_FIRMWARE_GROUP("nvidia/ga106/gsp/gsp");
        MODULE_FIRMWARE("nvidia/ga106/gsp/gsp-5258902.bin");
        MODULE_FIRMWARE("nvidia/ga106/gsp/gsp-5303002.bin");

so the group is created by startswith() rather than by the order the modinfo appears in the elf section. In i915 we'd have:

The way userspace parses these is reverse order, and it doesn't see

the main issue I have with it is that it relies on a order that is implicit rather than intended. The order comes from how the .modinfo ELF section is assembled together... so the fact that your call to kmod_module_get_info() returns a list with the keys in the reverse order of the MODULE_FIRMWARE() definitions, is basically because the compiler toolchain did it did that way.

Quoted 7 lines

It's worse when those sections come from different compilation units as the order then is not predictable and can easily break with changes to the build infra if the files are linked in different order.

I think the grouping thing here would only be supported with firmware defined on the same compilation unit, but it's something to keep in mind and document.

I had provided a simple API to help with explicit linker order years ago:

https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux-next.git/log/?h=20170620-linker-tables-v8

Other than that you have to rely on the order in the Makefile or way in which they are declared.

Quoted 7 lines
Quoted 3 lines

the GROUP until after the FIRMWARE, so this can't work, as it already will have included all the ones below, hence why I bracketed top and bottom with a group.

well... that is something that can be adapted easily by using a 2 pass approach, filtering out the list based on the groups.

Quoted 6 lines

I agree that yours is simpler though. If we can rely on the order produced by the compiler and we document the expectations of MODULE_FIRMWARE_GROUP_ONLY_ONE, then I believe we can stay with the simpler approach.

Luis, any thoughts here?

I see the Dracut code indicates that the order says now that you should put the preferred firmware last, and that seems to match most coding conventions, ie, new firmwares likely get added last, so it's a nice coincidence. Will this always work? I don't know. But if you like to hedge, then this seems fine so long as I'm folks follow up to fix issues later. I think it should and the simplicity is preferred, worth a shot I think.

But the examples on both sides are pretty terrible. I'd just like to ask all this gets extended in proper kdoc form and we are able to get users and developers to read this under "Module support" in:

https://docs.kernel.org/core-api/kernel-api.html

So go to town with a new section for:

Documentation/core-api/kernel-api.rst

Luis

#5 lore raw
Quoted 53 lines · Luis Chamberlain
Quoted 44 lines · Lucas De Marchi
Quoted 27 lines · Dave Airlie
Quoted 12 lines · Lucas De Marchi
Quoted 10 lines · Dave Airlie

From: Dave Airlie <[email protected]>

This adds a tag that will go into the module info, only one firmware from the group given needs to be available for this driver to work. This allows dracut to avoid adding in firmware that aren't needed.

This just brackets a module list in the modinfo, the modules in the list will get entries in reversed order so the last module in the list is the preferred one.

Quoted 5 lines
Quoted 2 lines

The corresponding dracut code it at:
https://github.com/dracutdevs/dracut/pull/2309

it would be good to have the example usage in the commit message here so it can be easily checked as reference for other drivers.

Good point.

Quoted 6 lines

I don't think we ever had any ordering in modinfo being relevant for other things. Considering the use case and that we could also use a similar thing for i915 / xe modules wrt to the major version, couldn't we do something like below?

Quoted 8 lines
Quoted 6 lines
        MODULE_FIRMWARE_GROUP("nvidia/ga106/gsp/gsp");
        MODULE_FIRMWARE("nvidia/ga106/gsp/gsp-5258902.bin");
        MODULE_FIRMWARE("nvidia/ga106/gsp/gsp-5303002.bin");

so the group is created by startswith() rather than by the order the modinfo appears in the elf section. In i915 we'd have:

The way userspace parses these is reverse order, and it doesn't see

the main issue I have with it is that it relies on a order that is implicit rather than intended. The order comes from how the .modinfo ELF section is assembled together... so the fact that your call to kmod_module_get_info() returns a list with the keys in the reverse order of the MODULE_FIRMWARE() definitions, is basically because the compiler toolchain did it did that way.

Quoted 7 lines

It's worse when those sections come from different compilation units as the order then is not predictable and can easily break with changes to the build infra if the files are linked in different order.

I think the grouping thing here would only be supported with firmware defined on the same compilation unit, but it's something to keep in mind and document.

Quoted 6 lines

I had provided a simple API to help with explicit linker order years ago:

https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux-next.git/log/?h=20170620-linker-tables-v8

Other than that you have to rely on the order in the Makefile or way in which they are declared.

but that doesn't change the order inside a single section, .modinfo in this case. Does it?

Quoted 13 lines
Quoted 13 lines
Quoted 4 lines

the GROUP until after the FIRMWARE, so this can't work, as it already will have included all the ones below, hence why I bracketed top and bottom with a group.

well... that is something that can be adapted easily by using a 2 pass approach, filtering out the list based on the groups.

I agree that yours is simpler though. If we can rely on the order produced by the compiler and we document the expectations of MODULE_FIRMWARE_GROUP_ONLY_ONE, then I believe we can stay with the simpler approach.

Quoted 5 lines
Quoted 1 line

Luis, any thoughts here?

I see the Dracut code indicates that the order says now that you should put the preferred firmware last, and that seems to match most coding conventions, ie, new firmwares likely get added last, so it's a nice

not all. i915 for example keeps it newest first so when attempting multiple firmware versions it starts from the preferred version. It will be harder to convert since it also uses a x-macro to make sure the MODULE_FIRMWARE() and the the platform mapping are actually using the same firmware.

Quoted 1 line

coincidence. Will this always work? I don't know. But if you like to

short answer: it depends if your compiler is gcc *and* -O2 is used Longer debug ahead. Simple test with the expansion of MODULE_FIRMWARE baked in:

	$ cat /tmp/a.c
	static const __attribute__((section("__modinfo_manual"), used, aligned(1))) char foo[] = "modinfo_manual_foo";
	static const __attribute__((section("__modinfo_manual"), used, aligned(1))) char bar[] = "modinfo_manual_bar";
	$ gcc -c -o /tmp/a.o /tmp/a.c
	$ objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual
	$ strings /tmp/modinfo_manual
	modinfo_manual_foo
	modinfo_manual_bar

However that doesn't match when building modules. In kmod:

testsuite/module-playground/mod-simple.c +4 -0
index 503e4d8..6dd5771 100644
@@ -30,3 +30,9 @@ module_exit(test_module_exit);
 
 MODULE_AUTHOR("Lucas De Marchi <[email protected]>");
 MODULE_LICENSE("GPL");
+
+
+static const char __UNIQUE_ID_firmware404[] __attribute__((__used__)) __attribute__((__section__("__modinfo_cpp"))) __attribute__((__aligned__(1))) = "modinfo_cpp_foo";
+static const char __UNIQUE_ID_firmware405[] __attribute__((__used__)) __attribute__((__section__("__modinfo_cpp"))) __attribute__((__aligned__(1))) = "modinfo_cpp_bar";
	$ make ....
	$ objcopy -O binary --only-section=__modinfo_cpp testsuite/module-playground/mod-simple.ko /tmp/modinfo_cpp
	$ strings /tmp/modinfo_cpp
	modinfo_cpp_bar
	modinfo_cpp_foo

It doesn't seem to be ./scripts/Makefile.modfinal neither as it's also inverted in testsuite/module-playground/mod-simple.o

After checking the options passed to gcc, here is the "culprit": -O2

	$ gcc -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
	modinfo_manual_foo
	modinfo_manual_bar
	$ gcc -O2 -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
	modinfo_manual_bar
	modinfo_manual_foo

It seems anything but -O0 inverts the section.

	$ gcc --version 
	gcc (GCC) 12.2.1 20230201

It doesn't match the behavior described in its man page though. Manually specifying all the options that -O1 turns on doesn't invert it.

	$ gcc -fauto-inc-dec -fbranch-count-reg -fcombine-stack-adjustments \
		-fcompare-elim -fcprop-registers -fdce -fdefer-pop -fdelayed-branch
		-fdse -fforward-propagate -fguess-branch-probability -fif-conversion \
		-fif-conversion2 -finline-functions-called-once -fipa-modref \
		-fipa-profile -fipa-pure-const -fipa-reference -fipa-reference-addressable \
		-fmerge-constants -fmove-loop-stores -fomit-frame-pointer -freorder-blocks \
		-fshrink-wrap -fshrink-wrap-separate -fsplit-wide-types -fssa-backprop \
		-fssa-phiopt -ftree-bit-ccp -ftree-ccp -ftree-ch -ftree-coalesce-vars \
		-ftree-copy-prop -ftree-dce -ftree-dominator-opts -ftree-dse -ftree-forwprop \
		-ftree-fre -ftree-phiprop -ftree-pta -ftree-scev-cprop -ftree-sink -ftree-slsr \
		-ftree-sra -ftree-ter -funit-at-a-time -c -o /tmp/a.o /tmp/a.c \
		&& objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
	cc1: warning: this target machine does not have delayed branches
	modinfo_manual_foo
	modinfo_manual_bar

Why? I'm not sure.

Finally, clang doesn't invert it for any optimization value.

	$ clang -O -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
	modinfo_manual_foo
	modinfo_manual_bar
	$ clang -O1 -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
	modinfo_manual_foo
	modinfo_manual_bar
	$ clang -O2 -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
	modinfo_manual_foo
	modinfo_manual_bar
Quoted 3 lines

hedge, then this seems fine so long as I'm folks follow up to fix issues later. I think it should and the simplicity is preferred, worth a shot I think.

Based on the above and my previous reply, I think we should have something more explicit about the order rather than relying on the toolchain behavior.

Lucas De Marchi

Quoted 12 lines

But the examples on both sides are pretty terrible. I'd just like to ask all this gets extended in proper kdoc form and we are able to get users and developers to read this under "Module support" in:

https://docs.kernel.org/core-api/kernel-api.html

So go to town with a new section for:

Documentation/core-api/kernel-api.rst

Luis

maintainer
#6 lore raw
Quoted 3 lines · Lucas De Marchi

Based on the above and my previous reply, I think we should have something more explicit about the order rather than relying on the toolchain behavior.

You can open code ELF sections and provide SORT() but you can also use helpers for all this. Long ago I provided low level ELF helpers to provide the ability to easily sort through data / code using linker-tables [0], to help with ELF section with explicit ordering, perhaps this could be leveraged?

I *think* for instance, one could do, using the built-in firmware conversion as a slightly relateed example [1], provide a firmware helper for drivers which uses something like DECLARE_FIRMWARE_TABLE(acme_gpu_fw), then that is declared as the ELF table for acme_gpu_fw, the firmware API could then get the hint to use that table for iterating over with linktable_for_each(fw, acme_gpu_fw). One would not be using the linker table for the actual firmware but instead for the firmware odering.

The firmware loader could be extended with something like

#define DECLARE_FIRMWARE_TABLE(fw_table) DECLARE_LINKTABLE_RO(struct fw_foo, fw_table)

struct fw_foo {
	const char *opt_subfamily;
};
#define FW_NAME_ORDERED(__level, __family, __sub_family)	\
	static LINKTABLE_INIT_DATA(fw_foo, __level) 		\
	__fw_ordered_##__family = {		     		\
	opt_subfamily = sub_family,				\
};

Then firmware could would use

FW_NAME_ORDERED(01, acme_gpu_fw, coyote);

And helpers can use it to look for the firmware an firmare API call.

As to why linker-tables never got upstream? It promised / documented too much, we need to just make the API conversion smooth and target that. The ordering is a secondary win. The fact that we can simplify init levels etc, is more futuristic and should only be documented once we get there.

[0] https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux-next.git/log/?h=20170620-linker-tables-v8
[1] https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux-next.git/commit/?h=20170620-linker-tables-v8&id=162698d2f1a2406c6a7a4d39f13113ca789fd2ec

Luis

#7 lore raw
In reply to Lucas De Marchi
Quoted 82 lines
Quoted 14 lines
Quoted 14 lines
Quoted 5 lines

the GROUP until after the FIRMWARE, so this can't work, as it already will have included all the ones below, hence why I bracketed top and bottom with a group.

well... that is something that can be adapted easily by using a 2 pass approach, filtering out the list based on the groups.

I agree that yours is simpler though. If we can rely on the order produced by the compiler and we document the expectations of MODULE_FIRMWARE_GROUP_ONLY_ONE, then I believe we can stay with the simpler approach.

Quoted 5 lines
Quoted 1 line

Luis, any thoughts here?

I see the Dracut code indicates that the order says now that you should put the preferred firmware last, and that seems to match most coding conventions, ie, new firmwares likely get added last, so it's a nice

not all. i915 for example keeps it newest first so when attempting multiple firmware versions it starts from the preferred version. It will be harder to convert since it also uses a x-macro to make sure the MODULE_FIRMWARE() and the the platform mapping are actually using the same firmware.

Quoted 1 line

coincidence. Will this always work? I don't know. But if you like to

short answer: it depends if your compiler is gcc *and* -O2 is used Longer debug ahead. Simple test with the expansion of MODULE_FIRMWARE baked in:

        $ cat /tmp/a.c
        static const __attribute__((section("__modinfo_manual"), used, aligned(1))) char foo[] = "modinfo_manual_foo";
        static const __attribute__((section("__modinfo_manual"), used, aligned(1))) char bar[] = "modinfo_manual_bar";
        $ gcc -c -o /tmp/a.o /tmp/a.c
        $ objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual
        $ strings /tmp/modinfo_manual
        modinfo_manual_foo
        modinfo_manual_bar

However that doesn't match when building modules. In kmod:

testsuite/module-playground/mod-simple.c +4 -0
index 503e4d8..6dd5771 100644
@@ -30,3 +30,9 @@ module_exit(test_module_exit);
 
  MODULE_AUTHOR("Lucas De Marchi <[email protected]>");
  MODULE_LICENSE("GPL");
+
+
+static const char __UNIQUE_ID_firmware404[] __attribute__((__used__)) __attribute__((__section__("__modinfo_cpp"))) __attribute__((__aligned__(1))) = "modinfo_cpp_foo";
+static const char __UNIQUE_ID_firmware405[] __attribute__((__used__)) __attribute__((__section__("__modinfo_cpp"))) __attribute__((__aligned__(1))) = "modinfo_cpp_bar";
 
        $ make ....
        $ objcopy -O binary --only-section=__modinfo_cpp testsuite/module-playground/mod-simple.ko /tmp/modinfo_cpp
        $ strings /tmp/modinfo_cpp
        modinfo_cpp_bar
        modinfo_cpp_foo

It doesn't seem to be ./scripts/Makefile.modfinal neither as it's also inverted in testsuite/module-playground/mod-simple.o

After checking the options passed to gcc, here is the "culprit": -O2

        $ gcc -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
        modinfo_manual_foo
        modinfo_manual_bar
        $ gcc -O2 -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
        modinfo_manual_bar
        modinfo_manual_foo

It seems anything but -O0 inverts the section.

        $ gcc --version
        gcc (GCC) 12.2.1 20230201

It doesn't match the behavior described in its man page though. Manually specifying all the options that -O1 turns on doesn't invert it.

Quoted 16 lines
        $ gcc -fauto-inc-dec -fbranch-count-reg -fcombine-stack-adjustments \
                -fcompare-elim -fcprop-registers -fdce -fdefer-pop -fdelayed-branch
                -fdse -fforward-propagate -fguess-branch-probability -fif-conversion \
                -fif-conversion2 -finline-functions-called-once -fipa-modref \
                -fipa-profile -fipa-pure-const -fipa-reference -fipa-reference-addressable \
                -fmerge-constants -fmove-loop-stores -fomit-frame-pointer -freorder-blocks \
                -fshrink-wrap -fshrink-wrap-separate -fsplit-wide-types -fssa-backprop \
                -fssa-phiopt -ftree-bit-ccp -ftree-ccp -ftree-ch -ftree-coalesce-vars \
                -ftree-copy-prop -ftree-dce -ftree-dominator-opts -ftree-dse -ftree-forwprop \
                -ftree-fre -ftree-phiprop -ftree-pta -ftree-scev-cprop -ftree-sink -ftree-slsr \
                -ftree-sra -ftree-ter -funit-at-a-time -c -o /tmp/a.o /tmp/a.c \
                && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
        cc1: warning: this target machine does not have delayed branches
        modinfo_manual_foo
        modinfo_manual_bar

Thanks Lucas,

-ftoplevel-reorder is the one that does it, now that does mean how I've done it isn't going to be robust.

I will reconsider but in order to keep backwards compat, it might be easier to add firmware groups as an explicit list, but also spit out the individual names, but not sure how clean this will end up on dracut side.

I'll take a look at the other options, but it does seem like reworking dracut is going to be the harder end of this, esp if I still want to keep compat with older ones.

Dave.

maintainer
#8 lore raw
Quoted 104 lines · Dave Airlie
Quoted 82 lines
Quoted 14 lines
Quoted 14 lines
Quoted 5 lines

the GROUP until after the FIRMWARE, so this can't work, as it already will have included all the ones below, hence why I bracketed top and bottom with a group.

well... that is something that can be adapted easily by using a 2 pass approach, filtering out the list based on the groups.

I agree that yours is simpler though. If we can rely on the order produced by the compiler and we document the expectations of MODULE_FIRMWARE_GROUP_ONLY_ONE, then I believe we can stay with the simpler approach.

Quoted 5 lines
Quoted 1 line

Luis, any thoughts here?

I see the Dracut code indicates that the order says now that you should put the preferred firmware last, and that seems to match most coding conventions, ie, new firmwares likely get added last, so it's a nice

not all. i915 for example keeps it newest first so when attempting multiple firmware versions it starts from the preferred version. It will be harder to convert since it also uses a x-macro to make sure the MODULE_FIRMWARE() and the the platform mapping are actually using the same firmware.

Quoted 1 line

coincidence. Will this always work? I don't know. But if you like to

short answer: it depends if your compiler is gcc *and* -O2 is used Longer debug ahead. Simple test with the expansion of MODULE_FIRMWARE baked in:

        $ cat /tmp/a.c
        static const __attribute__((section("__modinfo_manual"), used, aligned(1))) char foo[] = "modinfo_manual_foo";
        static const __attribute__((section("__modinfo_manual"), used, aligned(1))) char bar[] = "modinfo_manual_bar";
        $ gcc -c -o /tmp/a.o /tmp/a.c
        $ objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual
        $ strings /tmp/modinfo_manual
        modinfo_manual_foo
        modinfo_manual_bar

However that doesn't match when building modules. In kmod:

testsuite/module-playground/mod-simple.c +4 -0
index 503e4d8..6dd5771 100644
@@ -30,3 +30,9 @@ module_exit(test_module_exit);
 
  MODULE_AUTHOR("Lucas De Marchi <[email protected]>");
  MODULE_LICENSE("GPL");
+
+
+static const char __UNIQUE_ID_firmware404[] __attribute__((__used__)) __attribute__((__section__("__modinfo_cpp"))) __attribute__((__aligned__(1))) = "modinfo_cpp_foo";
+static const char __UNIQUE_ID_firmware405[] __attribute__((__used__)) __attribute__((__section__("__modinfo_cpp"))) __attribute__((__aligned__(1))) = "modinfo_cpp_bar";
 
        $ make ....
        $ objcopy -O binary --only-section=__modinfo_cpp testsuite/module-playground/mod-simple.ko /tmp/modinfo_cpp
        $ strings /tmp/modinfo_cpp
        modinfo_cpp_bar
        modinfo_cpp_foo

It doesn't seem to be ./scripts/Makefile.modfinal neither as it's also inverted in testsuite/module-playground/mod-simple.o

After checking the options passed to gcc, here is the "culprit": -O2

        $ gcc -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
        modinfo_manual_foo
        modinfo_manual_bar
        $ gcc -O2 -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
        modinfo_manual_bar
        modinfo_manual_foo

It seems anything but -O0 inverts the section.

        $ gcc --version
        gcc (GCC) 12.2.1 20230201

It doesn't match the behavior described in its man page though. Manually specifying all the options that -O1 turns on doesn't invert it.

Quoted 16 lines
        $ gcc -fauto-inc-dec -fbranch-count-reg -fcombine-stack-adjustments \
                -fcompare-elim -fcprop-registers -fdce -fdefer-pop -fdelayed-branch
                -fdse -fforward-propagate -fguess-branch-probability -fif-conversion \
                -fif-conversion2 -finline-functions-called-once -fipa-modref \
                -fipa-profile -fipa-pure-const -fipa-reference -fipa-reference-addressable \
                -fmerge-constants -fmove-loop-stores -fomit-frame-pointer -freorder-blocks \
                -fshrink-wrap -fshrink-wrap-separate -fsplit-wide-types -fssa-backprop \
                -fssa-phiopt -ftree-bit-ccp -ftree-ccp -ftree-ch -ftree-coalesce-vars \
                -ftree-copy-prop -ftree-dce -ftree-dominator-opts -ftree-dse -ftree-forwprop \
                -ftree-fre -ftree-phiprop -ftree-pta -ftree-scev-cprop -ftree-sink -ftree-slsr \
                -ftree-sra -ftree-ter -funit-at-a-time -c -o /tmp/a.o /tmp/a.c \
                && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
        cc1: warning: this target machine does not have delayed branches
        modinfo_manual_foo
        modinfo_manual_bar

Thanks Lucas,

-ftoplevel-reorder is the one that does it, now that does mean how I've done it isn't going to be robust.

Quoted 8 lines

I will reconsider but in order to keep backwards compat, it might be easier to add firmware groups as an explicit list, but also spit out the individual names, but not sure how clean this will end up on dracut side.

I'll take a look at the other options, but it does seem like reworking dracut is going to be the harder end of this, esp if I still want to keep compat with older ones.

Hey Dave, just curious if there was going to be another follow up patch for this or if it was already posted. I don't see it clearly so just wanted to double check.

Luis

#9 lore raw
Quoted 111 lines · Luis Chamberlain
Quoted 109 lines · Dave Airlie
Quoted 82 lines
Quoted 14 lines
Quoted 14 lines
Quoted 5 lines

the GROUP until after the FIRMWARE, so this can't work, as it already will have included all the ones below, hence why I bracketed top and bottom with a group.

well... that is something that can be adapted easily by using a 2 pass approach, filtering out the list based on the groups.

I agree that yours is simpler though. If we can rely on the order produced by the compiler and we document the expectations of MODULE_FIRMWARE_GROUP_ONLY_ONE, then I believe we can stay with the simpler approach.

Quoted 5 lines
Quoted 1 line

Luis, any thoughts here?

I see the Dracut code indicates that the order says now that you should put the preferred firmware last, and that seems to match most coding conventions, ie, new firmwares likely get added last, so it's a nice

not all. i915 for example keeps it newest first so when attempting multiple firmware versions it starts from the preferred version. It will be harder to convert since it also uses a x-macro to make sure the MODULE_FIRMWARE() and the the platform mapping are actually using the same firmware.

Quoted 1 line

coincidence. Will this always work? I don't know. But if you like to

short answer: it depends if your compiler is gcc *and* -O2 is used Longer debug ahead. Simple test with the expansion of MODULE_FIRMWARE baked in:

        $ cat /tmp/a.c
        static const __attribute__((section("__modinfo_manual"), used, aligned(1))) char foo[] = "modinfo_manual_foo";
        static const __attribute__((section("__modinfo_manual"), used, aligned(1))) char bar[] = "modinfo_manual_bar";
        $ gcc -c -o /tmp/a.o /tmp/a.c
        $ objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual
        $ strings /tmp/modinfo_manual
        modinfo_manual_foo
        modinfo_manual_bar

However that doesn't match when building modules. In kmod:

testsuite/module-playground/mod-simple.c +4 -0
index 503e4d8..6dd5771 100644
@@ -30,3 +30,9 @@ module_exit(test_module_exit);
 
  MODULE_AUTHOR("Lucas De Marchi <[email protected]>");
  MODULE_LICENSE("GPL");
+
+
+static const char __UNIQUE_ID_firmware404[] __attribute__((__used__)) __attribute__((__section__("__modinfo_cpp"))) __attribute__((__aligned__(1))) = "modinfo_cpp_foo";
+static const char __UNIQUE_ID_firmware405[] __attribute__((__used__)) __attribute__((__section__("__modinfo_cpp"))) __attribute__((__aligned__(1))) = "modinfo_cpp_bar";
 
        $ make ....
        $ objcopy -O binary --only-section=__modinfo_cpp testsuite/module-playground/mod-simple.ko /tmp/modinfo_cpp
        $ strings /tmp/modinfo_cpp
        modinfo_cpp_bar
        modinfo_cpp_foo

It doesn't seem to be ./scripts/Makefile.modfinal neither as it's also inverted in testsuite/module-playground/mod-simple.o

After checking the options passed to gcc, here is the "culprit": -O2

        $ gcc -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
        modinfo_manual_foo
        modinfo_manual_bar
        $ gcc -O2 -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
        modinfo_manual_bar
        modinfo_manual_foo

It seems anything but -O0 inverts the section.

        $ gcc --version
        gcc (GCC) 12.2.1 20230201

It doesn't match the behavior described in its man page though. Manually specifying all the options that -O1 turns on doesn't invert it.

Quoted 16 lines
        $ gcc -fauto-inc-dec -fbranch-count-reg -fcombine-stack-adjustments \
                -fcompare-elim -fcprop-registers -fdce -fdefer-pop -fdelayed-branch
                -fdse -fforward-propagate -fguess-branch-probability -fif-conversion \
                -fif-conversion2 -finline-functions-called-once -fipa-modref \
                -fipa-profile -fipa-pure-const -fipa-reference -fipa-reference-addressable \
                -fmerge-constants -fmove-loop-stores -fomit-frame-pointer -freorder-blocks \
                -fshrink-wrap -fshrink-wrap-separate -fsplit-wide-types -fssa-backprop \
                -fssa-phiopt -ftree-bit-ccp -ftree-ccp -ftree-ch -ftree-coalesce-vars \
                -ftree-copy-prop -ftree-dce -ftree-dominator-opts -ftree-dse -ftree-forwprop \
                -ftree-fre -ftree-phiprop -ftree-pta -ftree-scev-cprop -ftree-sink -ftree-slsr \
                -ftree-sra -ftree-ter -funit-at-a-time -c -o /tmp/a.o /tmp/a.c \
                && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
        cc1: warning: this target machine does not have delayed branches
        modinfo_manual_foo
        modinfo_manual_bar

Thanks Lucas,

-ftoplevel-reorder is the one that does it, now that does mean how I've done it isn't going to be robust.

I will reconsider but in order to keep backwards compat, it might be easier to add firmware groups as an explicit list, but also spit out the individual names, but not sure how clean this will end up on dracut side.

Quoted 7 lines
Quoted 3 lines

I'll take a look at the other options, but it does seem like reworking dracut is going to be the harder end of this, esp if I still want to keep compat with older ones.

Hey Dave, just curious if there was going to be another follow up patch for this or if it was already posted. I don't see it clearly so just wanted to double check.

I'm still considering the options here.

I could leave the kernel patch as-is and add explicit sorting in dracut for anything in the groups, but then we have to name/version the firmware in a certain way, another option might be to emit the group bounds and two records, one old, one new per-fw file, then have some sort of explicit versioning by the driver over what order to load them.

Dave.

maintainer
#10 lore raw
Quoted 6 lines · David Airlie
Quoted 4 lines · Luis Chamberlain

Hey Dave, just curious if there was going to be another follow up patch for this or if it was already posted. I don't see it clearly so just wanted to double check.

Quoted 8 lines

I'm still considering the options here.

I could leave the kernel patch as-is and add explicit sorting in dracut for anything in the groups, but then we have to name/version the firmware in a certain way, another option might be to emit the group bounds and two records, one old, one new per-fw file, then have some sort of explicit versioning by the driver over what order to load them.

Great thanks, just wanted to make sure I didn't neglect any pending patch.

Luis