device-types/multiple: replace queues with enqueues
PATCH 1/1 device-types/multiple: replace queues with enqueues
Queue is a verb and noun both. Replacing it with enqueue avoids ambiguity around plural queues noun vs verb; similar to virtio fs device description.
---
changelog:v0->v1:
- replace 'on' to 'to'
--- device-types/blk/description.tex | 2 +- device-types/gpio/description.tex | 4 ++-- device-types/i2c/description.tex | 2 +- device-types/scsi/description.tex | 2 +- device-types/vsock/description.tex | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-)
device-types/blk/description.tex +1 -1
@@ -427,7 +427,7 @@ \subsubsection{Legacy Interface: Device Initialization}\label{sec:Device Types / \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Operation} -The driver queues requests to the virtqueues, and they are used by +The driver enqueues requests to the virtqueues, and they are used by the device (not necessarily in order). Each request except VIRTIO_BLK_T_ZONE_APPEND is of form:
device-types/gpio/description.tex +2 -2
@@ -358,7 +358,7 @@ \subsubsection{requestq Operation: Set IRQ Type}\label{sec:Device Types / GPIO D \subsubsection{requestq Operation: Message Flow}\label{sec:Device Types / GPIO Device / requestq Operation / Message Flow} \begin{itemize} -\item The driver queues \field{struct virtio_gpio_request} and +\item The driver enqueues \field{struct virtio_gpio_request} and \field{virtio_gpio_response} buffers to the \field{requestq} virtqueue, after filling all fields of the \field{struct virtio_gpio_request} buffer as defined by the specific message type.
@@ -458,7 +458,7 @@ \subsection{Device Operation: eventq}\label{sec:Device Types / GPIO Device / eve The \field{eventq} virtqueue is used by the driver to unmask the interrupts and used by the device to notify the driver of newly sensed interrupts. In order to -unmask interrupt on a GPIO line, the driver queues a pair of buffers, +unmask interrupt on a GPIO line, the driver enqueues a pair of buffers, \field{struct virtio_gpio_irq_request} (filled by driver) and \field{struct virtio_gpio_irq_response} (to be filled by device later), to the \field{eventq} virtqueue. A separate pair of buffers must be queued for each GPIO line, the
device-types/i2c/description.tex +1 -1
@@ -47,7 +47,7 @@ \subsection{Device Operation}\label{sec:Device Types / I2C Adapter Device / Devi \subsubsection{Device Operation: Request Queue}\label{sec:Device Types / I2C Adapter Device / Device Operation: Request Queue} -The driver queues requests to the virtqueue, and they are used by the +The driver enqueues requests to the virtqueue, and they are used by the device. The request is the representation of segments of an I2C transaction. Each request is of the form:
device-types/scsi/description.tex +1 -1
@@ -158,7 +158,7 @@ \subsection{Device Operation}\label{sec:Device Types / SCSI Host Device / Device \subsubsection{Device Operation: Request Queues}\label{sec:Device Types / SCSI Host Device / Device Operation / Device Operation: Request Queues} -The driver queues requests to an arbitrary request queue, and +The driver enqueues requests to an arbitrary request queue, and they are used by the device on that same queue. It is the responsibility of the driver to ensure strict request ordering for commands placed on different queues, because they will be
device-types/vsock/description.tex +1 -1
@@ -218,7 +218,7 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / \field{buf_alloc} and \field{fwd_cnt} fields. \subsubsection{Receive and Transmit}\label{sec:Device Types / Socket Device / Device Operation / Receive and Transmit} -The driver queues outgoing packets on the tx virtqueue and incoming packet +The driver enqueues outgoing packets to the tx virtqueue and incoming packet receive buffers on the rx virtqueue. Packets are of the following form: \begin{lstlisting}
Signature · 6 lines
2.26.2 --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
Quoted 6 lines · Parav Pandit
Queue is a verb and noun both. Replacing it with enqueue avoids ambiguity around plural queues noun vs verb; similar to virtio fs device description.
Signed-off-by Parav Pandit <[email protected]>
ACK stands. Cornelia, editorial change?
Quoted 88 lines
---
changelog:v0->v1:
- replace 'on' to 'to'--- device-types/blk/description.tex | 2 +- device-types/gpio/description.tex | 4 ++-- device-types/i2c/description.tex | 2 +- device-types/scsi/description.tex | 2 +- device-types/vsock/description.tex | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-)device-types/blk/description.tex +1
-1@@ -427,7 +427,7 @@ \subsubsection{Legacy Interface: Device Initialization}\label{sec:Device Types / \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Operation} -The driver queues requests to the virtqueues, and they are used by +The driver enqueues requests to the virtqueues, and they are used by the device (not necessarily in order). Each request except VIRTIO_BLK_T_ZONE_APPEND is of form:device-types/gpio/description.tex +2
-2@@ -358,7 +358,7 @@ \subsubsection{requestq Operation: Set IRQ Type}\label{sec:Device Types / GPIO D \subsubsection{requestq Operation: Message Flow}\label{sec:Device Types / GPIO Device / requestq Operation / Message Flow} \begin{itemize} -\item The driver queues \field{struct virtio_gpio_request} and +\item The driver enqueues \field{struct virtio_gpio_request} and \field{virtio_gpio_response} buffers to the \field{requestq} virtqueue, after filling all fields of the \field{struct virtio_gpio_request} buffer as defined by the specific message type.@@ -458,7 +458,7 @@ \subsection{Device Operation: eventq}\label{sec:Device Types / GPIO Device / eve The \field{eventq} virtqueue is used by the driver to unmask the interrupts and used by the device to notify the driver of newly sensed interrupts. In order to -unmask interrupt on a GPIO line, the driver queues a pair of buffers, +unmask interrupt on a GPIO line, the driver enqueues a pair of buffers, \field{struct virtio_gpio_irq_request} (filled by driver) and \field{struct virtio_gpio_irq_response} (to be filled by device later), to the \field{eventq} virtqueue. A separate pair of buffers must be queued for each GPIO line, thedevice-types/i2c/description.tex +1
-1@@ -47,7 +47,7 @@ \subsection{Device Operation}\label{sec:Device Types / I2C Adapter Device / Devi \subsubsection{Device Operation: Request Queue}\label{sec:Device Types / I2C Adapter Device / Device Operation: Request Queue} -The driver queues requests to the virtqueue, and they are used by the +The driver enqueues requests to the virtqueue, and they are used by the device. The request is the representation of segments of an I2C transaction. Each request is of the form:device-types/scsi/description.tex +1
-1@@ -158,7 +158,7 @@ \subsection{Device Operation}\label{sec:Device Types / SCSI Host Device / Device \subsubsection{Device Operation: Request Queues}\label{sec:Device Types / SCSI Host Device / Device Operation / Device Operation: Request Queues} -The driver queues requests to an arbitrary request queue, and +The driver enqueues requests to an arbitrary request queue, and they are used by the device on that same queue. It is the responsibility of the driver to ensure strict request ordering for commands placed on different queues, because they will bedevice-types/vsock/description.tex +1
-1@@ -218,7 +218,7 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / \field{buf_alloc} and \field{fwd_cnt} fields. \subsubsection{Receive and Transmit}\label{sec:Device Types / Socket Device / Device Operation / Receive and Transmit} -The driver queues outgoing packets on the tx virtqueue and incoming packet +The driver enqueues outgoing packets to the tx virtqueue and incoming packet receive buffers on the rx virtqueue. Packets are of the following form: \begin{lstlisting}Signature · 1 line
2.26.2
This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC.
In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting.
Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/
Quoted 10 lines · Parav Pandit
Queue is a verb and noun both. Replacing it with enqueue avoids ambiguity around plural queues noun vs verb; similar to virtio fs device description.
Signed-off-by Parav Pandit <[email protected]>---
changelog:v0->v1:
- replace 'on' to 'to'
Quoted 7 lines
--- device-types/blk/description.tex | 2 +- device-types/gpio/description.tex | 4 ++-- device-types/i2c/description.tex | 2 +- device-types/scsi/description.tex | 2 +- device-types/vsock/description.tex | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-)
Thanks, pushed as editorial update.
This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC.
In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting.
Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/