Skip to contentSkip to conversation

hw/riscv/virt: Add a second UART for secure world

PATCH In review Yong Li 3 participants 4 messages Apr 24, 2023 RISC-V

lore
Share & tools
lore

Yong Li

author
#0 lore raw

PATCH 1/1 hw/riscv/virt: Add a second UART for secure world

The virt machine can have two UARTs and the second UART can be used when host secure-mode support is enabled.

Cc "Zhiwei Liu" <[email protected]>
---
 hw/riscv/virt.c         | 4 ++++
 include/hw/riscv/virt.h | 2 ++
 2 files changed, 6 insertions(+)
hw/riscv/virt.c +4 -0
index b38b41e685..02475e1678 100644
@@ -88,6 +88,7 @@ static const MemMapEntry virt_memmap[] = {
     [VIRT_APLIC_S] =      {  0xd000000, APLIC_SIZE(VIRT_CPUS_MAX) },
     [VIRT_UART0] =        { 0x10000000,         0x100 },
     [VIRT_VIRTIO] =       { 0x10001000,        0x1000 },
+    [VIRT_UART1] =        { 0x10002000,         0x100 },
     [VIRT_FW_CFG] =       { 0x10100000,          0x18 },
     [VIRT_FLASH] =        { 0x20000000,     0x4000000 },
     [VIRT_IMSIC_M] =      { 0x24000000, VIRT_IMSIC_MAX_SIZE },
@@ -1508,6 +1509,9 @@ static void virt_machine_init(MachineState *machine)
     serial_mm_init(system_memory, memmap[VIRT_UART0].base,
         0, qdev_get_gpio_in(DEVICE(mmio_irqchip), UART0_IRQ), 399193,
         serial_hd(0), DEVICE_LITTLE_ENDIAN);
+    serial_mm_init(system_memory, memmap[VIRT_UART1].base,
+        0, qdev_get_gpio_in(DEVICE(mmio_irqchip), UART1_IRQ), 399193,
+        serial_hd(1), DEVICE_LITTLE_ENDIAN);
 
     sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base,
         qdev_get_gpio_in(DEVICE(mmio_irqchip), RTC_IRQ));
include/hw/riscv/virt.h +2 -0
index e5c474b26e..8d2f8f225d 100644
@@ -74,6 +74,7 @@ enum {
     VIRT_APLIC_S,
     VIRT_UART0,
     VIRT_VIRTIO,
+    VIRT_UART1,
     VIRT_FW_CFG,
     VIRT_IMSIC_M,
     VIRT_IMSIC_S,
@@ -88,6 +89,7 @@ enum {
 enum {
     UART0_IRQ = 10,
     RTC_IRQ = 11,
+    UART1_IRQ = 12,
     VIRTIO_IRQ = 1, /* 1 to 8 */
     VIRTIO_COUNT = 8,
     PCIE_IRQ = 0x20, /* 32 to 35 */
Signature · 1 line
2.25.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 5 lines · Yong Li

The virt machine can have two UARTs and the second UART can be used when host secure-mode support is enabled.

Cc "Zhiwei Liu"<[email protected]>

Should  cc other Maintainers and Reviewers. Get the list by running the script

./scripts/get_maintainer.pl yours.patch

Quoted 10 lines
---
  hw/riscv/virt.c         | 4 ++++
  include/hw/riscv/virt.h | 2 ++
  2 files changed, 6 insertions(+)
hw/riscv/virt.c +0 -0
index b38b41e685..02475e1678 100644

hw/riscv/virt.c static const MemMapEntry virt_memmap[] = { · line 91

Quoted 4 lines
hw/riscv/virt.c +1 -0
@@ -88,6 +88,7 @@ static const MemMapEntry virt_memmap[] = {
      [VIRT_APLIC_S] =      {  0xd000000, APLIC_SIZE(VIRT_CPUS_MAX) },
      [VIRT_UART0] =        { 0x10000000,         0x100 },
      [VIRT_VIRTIO] =       { 0x10001000,        0x1000 },
+    [VIRT_UART1] =        { 0x10002000,         0x100 },

Can we move it a position adjacent to the VIRT_UART0, such as 0x10000100?

Otherwise,

Zhiwei

Quoted 33 lines
hw/riscv/virt.c +3 -0
      [VIRT_FW_CFG] =       { 0x10100000,          0x18 },
      [VIRT_FLASH] =        { 0x20000000,     0x4000000 },
      [VIRT_IMSIC_M] =      { 0x24000000, VIRT_IMSIC_MAX_SIZE },
@@ -1508,6 +1509,9 @@ static void virt_machine_init(MachineState *machine)
      serial_mm_init(system_memory, memmap[VIRT_UART0].base,
          0, qdev_get_gpio_in(DEVICE(mmio_irqchip), UART0_IRQ), 399193,
          serial_hd(0), DEVICE_LITTLE_ENDIAN);
+    serial_mm_init(system_memory, memmap[VIRT_UART1].base,
+        0, qdev_get_gpio_in(DEVICE(mmio_irqchip), UART1_IRQ), 399193,
+        serial_hd(1), DEVICE_LITTLE_ENDIAN);
 
      sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base,
          qdev_get_gpio_in(DEVICE(mmio_irqchip), RTC_IRQ));
include/hw/riscv/virt.h +2 -0
index e5c474b26e..8d2f8f225d 100644
@@ -74,6 +74,7 @@ enum {
      VIRT_APLIC_S,
      VIRT_UART0,
      VIRT_VIRTIO,
+    VIRT_UART1,
      VIRT_FW_CFG,
      VIRT_IMSIC_M,
      VIRT_IMSIC_S,
@@ -88,6 +89,7 @@ enum {
  enum {
      UART0_IRQ = 10,
      RTC_IRQ = 11,
+    UART1_IRQ = 12,
      VIRTIO_IRQ = 1, /* 1 to 8 */
      VIRTIO_COUNT = 8,
      PCIE_IRQ = 0x20, /* 32 to 35 */
author
#2 lore raw
Quoted 6 lines · LIU Zhiwei
Quoted 3 lines · Yong Li

The virt machine can have two UARTs and the second UART can be used when host secure-mode support is enabled.

Quoted 7 lines
Quoted 2 lines
Cc "Zhiwei Liu"<[email protected]>

Should  cc other Maintainers and Reviewers. Get the list by running the script

./scripts/get_maintainer.pl yours.patch

Sure,

Quoted 17 lines
Quoted 10 lines
---
  hw/riscv/virt.c         | 4 ++++
  include/hw/riscv/virt.h | 2 ++
  2 files changed, 6 insertions(+)
hw/riscv/virt.c +0 -0
index b38b41e685..02475e1678 100644

hw/riscv/virt.c static const MemMapEntry virt_memmap[] = { · line 91

Quoted 4 lines
hw/riscv/virt.c +1 -0
@@ -88,6 +88,7 @@ static const MemMapEntry virt_memmap[] = {
      [VIRT_APLIC_S] =      {  0xd000000, APLIC_SIZE(VIRT_CPUS_MAX) },
      [VIRT_UART0] =        { 0x10000000,         0x100 },
      [VIRT_VIRTIO] =       { 0x10001000,        0x1000 },
+    [VIRT_UART1] =        { 0x10002000,         0x100 },

Can we move it a position adjacent to the VIRT_UART0, such as 0x10000100?

Quoted 2 lines

Otherwise,

This probably cause back compatible issue to the firmware or other code who use VIRT_VIRTIO.

Actually, similar code in hw/arm/sbsa-ref.c,  the UART devices' address are also not continuously.

It should not be a problem. Thanks!

Quoted 37 lines

Zhiwei

Quoted 33 lines
hw/riscv/virt.c +3 -0
      [VIRT_FW_CFG] =       { 0x10100000,          0x18 },
      [VIRT_FLASH] =        { 0x20000000,     0x4000000 },
      [VIRT_IMSIC_M] =      { 0x24000000, VIRT_IMSIC_MAX_SIZE },
@@ -1508,6 +1509,9 @@ static void virt_machine_init(MachineState *machine)
      serial_mm_init(system_memory, memmap[VIRT_UART0].base,
          0, qdev_get_gpio_in(DEVICE(mmio_irqchip), UART0_IRQ), 399193,
          serial_hd(0), DEVICE_LITTLE_ENDIAN);
+    serial_mm_init(system_memory, memmap[VIRT_UART1].base,
+        0, qdev_get_gpio_in(DEVICE(mmio_irqchip), UART1_IRQ), 399193,
+        serial_hd(1), DEVICE_LITTLE_ENDIAN);
 
      sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base,
          qdev_get_gpio_in(DEVICE(mmio_irqchip), RTC_IRQ));
include/hw/riscv/virt.h +2 -0
index e5c474b26e..8d2f8f225d 100644
@@ -74,6 +74,7 @@ enum {
      VIRT_APLIC_S,
      VIRT_UART0,
      VIRT_VIRTIO,
+    VIRT_UART1,
      VIRT_FW_CFG,
      VIRT_IMSIC_M,
      VIRT_IMSIC_S,
@@ -88,6 +89,7 @@ enum {
  enum {
      UART0_IRQ = 10,
      RTC_IRQ = 11,
+    UART1_IRQ = 12,
      VIRTIO_IRQ = 1, /* 1 to 8 */
      VIRTIO_COUNT = 8,
      PCIE_IRQ = 0x20, /* 32 to 35 */