arm64: dts: qcom: sa8775p: add the watchdog node
PATCH 1/1 arm64: dts: qcom: sa8775p: add the watchdog node
From: Bartosz Golaszewski <[email protected]>
Now that the hypervisor issue is fixed, we can add the watchdog node for sa8775p platforms.
Signed-off-by Bartosz Golaszewski <[email protected]>
--- arch/arm64/boot/dts/qcom/sa8775p.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/qcom/sa8775p.dtsi +7 -0
@@ -1008,6 +1008,13 @@ intc: interrupt-controller@17a00000 { redistributor-stride = <0x0 0x20000>; }; + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt"; + reg = <0x0 0x17c10000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + memtimer: timer@17c20000 { compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>;
Signature · 1 line
2.39.2
Quoted 6 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
Now that the hypervisor issue is fixed, we can add the watchdog node for sa8775p platforms.
Applied, thanks!
[1/1] arm64: dts: qcom: sa8775p: add the watchdog node
commit: 09b701b89a761e5e9566d65326d5fe0e94eaa48f
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>