Skip to contentSkip to conversation

hwmon: (pmbus) add ir35215 driver

PATCH In review Scott Smith 2 participants 2 messages Apr 27, 2023 Hardware monitoring

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hwmon: (pmbus) add ir35215 driver

IR35215 is a digital multi-phase controller.

---
 drivers/hwmon/pmbus/Kconfig   |  9 +++++
 drivers/hwmon/pmbus/Makefile  |  1 +
 drivers/hwmon/pmbus/ir35215.c | 65 +++++++++++++++++++++++++++++++++++
 3 files changed, 75 insertions(+)
 create mode 100644 drivers/hwmon/pmbus/ir35215.c
drivers/hwmon/pmbus/Kconfig +9 -0
index 270b6336b76d..5c089f7e4423 100644
@@ -123,6 +123,15 @@ config SENSORS_INSPUR_IPSPS
 	  This driver can also be built as a module. If so, the module will
 	  be called inspur-ipsps.
 
+config SENSORS_IR35215
+       tristate "Infineon IR35215"
+       help
+         If you say yes here you get hardware monitoring support for the
+         Infineon IR35215 controller.
+
+         This driver can also be built as a module. If so, the module will
+         be called ir35215.
+
 config SENSORS_IR35221
 	tristate "Infineon IR35221"
 	help
drivers/hwmon/pmbus/Makefile +1 -0
index 84ee960a6c2d..fbb9cf048326 100644
@@ -15,6 +15,7 @@ obj-$(CONFIG_SENSORS_FSP_3Y)	+= fsp-3y.o
 obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
 obj-$(CONFIG_SENSORS_DPS920AB)	+= dps920ab.o
 obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
+obj-$(CONFIG_SENSORS_IR35215)   += ir35215.o
 obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
 obj-$(CONFIG_SENSORS_IR36021)	+= ir36021.o
 obj-$(CONFIG_SENSORS_IR38064)	+= ir38064.o
drivers/hwmon/pmbus/ir35215.c new file +65 -0

65 lines not on this page · raw message

Signature · 1 line
2.34.1
maintainer
#1 lore raw
Quoted 3 lines · Scott Smith

IR35215 is a digital multi-phase controller.

Does this chip really need its own driver ? Please check if it can be added to pmbus.c instead. If not, please provide a rationale explaining why that does not work. Also, if you have access to the datasheet, please make sure that the chip is sufficiently different from IR35221 to warrant a separate driver.

Additional comments inline.

Thanks,
Guenter

Quoted 4 lines
---
  drivers/hwmon/pmbus/Kconfig   |  9 +++++
  drivers/hwmon/pmbus/Makefile  |  1 +
  drivers/hwmon/pmbus/ir35215.c | 65 +++++++++++++++++++++++++++++++++++

Documentation/hwmon/ir35215.rst needed (if this driver is needed).

Quoted 41 lines
  3 files changed, 75 insertions(+)

create mode 100644 drivers/hwmon/pmbus/ir35215.c

drivers/hwmon/pmbus/Kconfig1 renamed from drivers/hwmon/pmbus/Kconfig +9 -0
index 270b6336b76d..5c089f7e4423 100644
@@ -123,6 +123,15 @@ config SENSORS_INSPUR_IPSPS
  	  This driver can also be built as a module. If so, the module will
  	  be called inspur-ipsps.
 
+config SENSORS_IR35215
+       tristate "Infineon IR35215"
+       help
+         If you say yes here you get hardware monitoring support for the
+         Infineon IR35215 controller.
+
+         This driver can also be built as a module. If so, the module will
+         be called ir35215.
+
  config SENSORS_IR35221
  	tristate "Infineon IR35221"
  	help
drivers/hwmon/pmbus/Makefile +1 -0
index 84ee960a6c2d..fbb9cf048326 100644
@@ -15,6 +15,7 @@ obj-$(CONFIG_SENSORS_FSP_3Y)	+= fsp-3y.o
  obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
  obj-$(CONFIG_SENSORS_DPS920AB)	+= dps920ab.o
  obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
+obj-$(CONFIG_SENSORS_IR35215)   += ir35215.o
  obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
  obj-$(CONFIG_SENSORS_IR36021)	+= ir36021.o
  obj-$(CONFIG_SENSORS_IR38064)	+= ir38064.o
drivers/hwmon/pmbus/ir35215.c new file +0 -0
new file mode 100644
index 000000000000..92d59e78bfd0

drivers/hwmon/pmbus/ir35215.c line 9

Quoted 9 lines
drivers/hwmon/pmbus/ir35215.c new file +9 -0
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon IR35215
+ *
+ * Copyright (c) Meta Platforms, Inc. and affiliates.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon-sysfs.h>

Not needed.

Quoted 23 lines
drivers/hwmon/pmbus/ir35215.c new file +23 -0
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+static const u32 functionality = PMBUS_HAVE_TEMP
+	| PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
+	| PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT
+	| PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
+	| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+	| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP;
+
+static struct pmbus_driver_info ir35215_info = {
+	.pages = 2,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.func[0] = functionality,
+	.func[1] = functionality,

drivers/hwmon/pmbus/ir35215.c line 42

Quoted 10 lines
drivers/hwmon/pmbus/ir35215.c new file +10 -0
+};
+
+static int ir35215_probe(struct i2c_client *client)
+{
+	/*
+	 * IR35215 devices may not stay in page 0 during device
+	 * probe which leads to probe failure (read status word failed).
+	 * So let's set the device to page 0 at the beginning.
+	 */
+	i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);

That should probably be added to the pmbus core code since it potentially affects all PMBus chips.

Quoted 23 lines
drivers/hwmon/pmbus/ir35215.c new file +23 -0
+	return pmbus_do_probe(client, &ir35215_info);
+}
+
+static const struct i2c_device_id ir35215_id[] = {
+	{ "ir35215", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ir35215_id);
+
+static struct i2c_driver ir35215_driver = {
+	.driver = {
+		   .name = "ir35215",
+	},
+	.probe_new = ir35215_probe,
+	.id_table = ir35215_id,
+};
+
+module_i2c_driver(ir35215_driver);
+
+MODULE_AUTHOR("Tao Ren <[email protected]>");
+MODULE_DESCRIPTION("PMBus driver for Infineon IR35215");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);