Skip to contentSkip to conversation

spi: bcm63xx-hsspi: driver and doc updates

PATCH Superseded William Zhang 3 participants 20 messages May 2, 2023 – Jun 7, 2023

Subsystems (4)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

William Zhang

author maintainer
#0 lore raw

v2 cover spi: bcm63xx-hsspi: driver and doc updates

This patch series is the u-boot port from the recently accepted kernel Broadcom HSSPI driver patch series here [1]. It includes the accumulative updates and fixes for the driver from Broadcom. It also added a new driver for the updated SPI controller found in the new BCMBCA SoC. The device tree document is converted to yaml format and updated accordingly.

[1]: https://lore.kernel.org/all/[email protected]/

Changes in v2:
- Add Álvaro Fernández Rojas as another maintainer

William Zhang (9):
dt-bindings: spi: Add bcm63xx-hsspi controller support
ARM: dts: broadcom: bcmbca: Add spi controller node
arm64: dts: broadcom: bcmbca: Add spi controller node
spi: bcm63xx-hsspi: Enable SPI drivers by default
spi: bcm63xx-hsspi: Add new compatible string support
spi: bcm63xx-hsspi: Fix multi-bit mode setting
spi: bcm63xx-hsspi: Add prepend mode support
spi: bcmbca-hsspi: Add driver for newer HSSPI controller
MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers

 MAINTAINERS                                   |   9 +
 arch/arm/Kconfig                              |   2 +
 arch/arm/dts/bcm47622.dtsi                    |  18 +
 arch/arm/dts/bcm4908.dtsi                     |  17 +
 arch/arm/dts/bcm4912.dtsi                     |  20 +
 arch/arm/dts/bcm63138.dtsi                    |  18 +
 arch/arm/dts/bcm63146.dtsi                    |  19 +
 arch/arm/dts/bcm63148.dtsi                    |  18 +
 arch/arm/dts/bcm63158.dtsi                    |  15 +-
 arch/arm/dts/bcm63178.dtsi                    |  19 +
 arch/arm/dts/bcm6756.dtsi                     |  19 +
 arch/arm/dts/bcm6813.dtsi                     |  20 +
 arch/arm/dts/bcm6846.dtsi                     |  18 +
 arch/arm/dts/bcm6855.dtsi                     |  27 +-
 arch/arm/dts/bcm6856.dtsi                     |  23 +-
 arch/arm/dts/bcm6858.dtsi                     |  23 +-
 arch/arm/dts/bcm6878.dtsi                     |  19 +
 arch/arm/dts/bcm947622.dts                    |   4 +
 arch/arm/dts/bcm94908.dts                     |   4 +
 arch/arm/dts/bcm94912.dts                     |   4 +
 arch/arm/dts/bcm963138.dts                    |   4 +
 arch/arm/dts/bcm963146.dts                    |   4 +
 arch/arm/dts/bcm963148.dts                    |   4 +
 arch/arm/dts/bcm963158.dts                    |   4 +
 arch/arm/dts/bcm963178.dts                    |   4 +
 arch/arm/dts/bcm96756.dts                     |   4 +
 arch/arm/dts/bcm96813.dts                     |   4 +
 arch/arm/dts/bcm96846.dts                     |   4 +
 arch/arm/dts/bcm96855.dts                     |   4 +
 arch/arm/dts/bcm96856.dts                     |   4 +
 arch/arm/dts/bcm96858.dts                     |   4 +
 arch/arm/dts/bcm96878.dts                     |   4 +
 arch/arm/mach-bcmbca/Kconfig                  |  26 ++
 .../spi/brcm,bcm63xx-hsspi.yaml               | 134 ++++++
 drivers/spi/Kconfig                           |  13 +-
 drivers/spi/Makefile                          |   1 +
 drivers/spi/bcm63xx_hsspi.c                   | 277 +++++++++++-
 drivers/spi/bcmbca_hsspi.c                    | 414 ++++++++++++++++++
 38 files changed, 1160 insertions(+), 69 deletions(-)
 create mode 100644 doc/device-tree-bindings/spi/brcm,bcm63xx-hsspi.yaml
 create mode 100644 drivers/spi/bcmbca_hsspi.c
Signature · 1 line
2.37.3
author maintainer
#1 lore raw

PATCH v2 1/9 dt-bindings: spi: Add bcm63xx-hsspi controller support

Bring the device tree binding document from Linux to u-boot

Port from linux patches:

---

Changes in v2: None

 .../spi/brcm,bcm63xx-hsspi.yaml               | 134 ++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 doc/device-tree-bindings/spi/brcm,bcm63xx-hsspi.yaml
doc/device-tree-bindings/spi/brcm,bcm63xx-hsspi.yaml new file +134 -0
new file mode 100644
index 000000000000..6554978583f8
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-hsspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC High Speed SPI controller
+
+maintainers:
+  - William Zhang <[email protected]>
+  - Kursad Oney <[email protected]>
+  - Jonas Gorski <[email protected]>
+
+description: |
+  Broadcom Broadband SoC supports High Speed SPI master controller since the
+  early MIPS based chips such as BCM6328 and BCM63268.  This initial rev 1.0
+  controller was carried over to recent ARM based chips, such as BCM63138,
+  BCM4908 and BCM6858. The old MIPS based chip should continue to use the
+  brcm,bcm6328-hsspi compatible string. The recent ARM based chip is required to
+  use the brcm,bcmbca-hsspi-v1.0 as part of its compatible string list as
+  defined below to match the specific chip along with ip revision info.
+
+  This rev 1.0 controller has a limitation that can not keep the chip select line
+  active between the SPI transfers within the same SPI message. This can
+  terminate the transaction to some SPI devices prematurely. The issue can be
+  worked around by either the controller's prepend mode or using the dummy chip
+  select workaround. Driver automatically picks the suitable mode based on
+  transfer type so it is transparent to the user.
+
+  The newer SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI
+  controller rev 1.1 that add the capability to allow the driver to control chip
+  select explicitly. This solves the issue in the old controller.
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm6328-hsspi
+      - items:
+          - enum:
+              - brcm,bcm47622-hsspi
+              - brcm,bcm4908-hsspi
+              - brcm,bcm63138-hsspi
+              - brcm,bcm63146-hsspi
+              - brcm,bcm63148-hsspi
+              - brcm,bcm63158-hsspi
+              - brcm,bcm63178-hsspi
+              - brcm,bcm6846-hsspi
+              - brcm,bcm6856-hsspi
+              - brcm,bcm6858-hsspi
+              - brcm,bcm6878-hsspi
+          - const: brcm,bcmbca-hsspi-v1.0
+      - items:
+          - enum:
+              - brcm,bcm4912-hsspi
+              - brcm,bcm6756-hsspi
+              - brcm,bcm6813-hsspi
+              - brcm,bcm6855-hsspi
+          - const: brcm,bcmbca-hsspi-v1.1
+
+  reg:
+    items:
+      - description: main registers
+      - description: miscellaneous control registers
+    minItems: 1
+
+  reg-names:
+    items:
+      - const: hsspi
+      - const: spim-ctrl
+    minItems: 1
+
+  clocks:
+    items:
+      - description: SPI master reference clock
+      - description: SPI master pll clock
+
+  clock-names:
+    items:
+      - const: hsspi
+      - const: pll
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm6328-hsspi
+              - brcm,bcmbca-hsspi-v1.0
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+          maxItems: 2
+      required:
+        - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    spi@ff801000 {
+        compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+        reg = <0xff801000 0x1000>,
+              <0xff802610 0x4>;
+        reg-names = "hsspi", "spim-ctrl";
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&hsspi>, <&hsspi_pll>;
+        clock-names = "hsspi", "pll";
+        num-cs = <8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
Signature · 1 line
2.37.3
author maintainer
#2 lore raw

PATCH v2 2/9 ARM: dts: broadcom: bcmbca: Add spi controller node

In reply to William Zhang

Add support for HSSPI controller in ARMv7 chip dts files.

Port from linux patch:

---

Changes in v2: None

 arch/arm/dts/bcm47622.dtsi | 18 ++++++++++++++++++
 arch/arm/dts/bcm63138.dtsi | 18 ++++++++++++++++++
 arch/arm/dts/bcm63148.dtsi | 18 ++++++++++++++++++
 arch/arm/dts/bcm63178.dtsi | 19 +++++++++++++++++++
 arch/arm/dts/bcm6756.dtsi  | 19 +++++++++++++++++++
 arch/arm/dts/bcm6846.dtsi  | 18 ++++++++++++++++++
 arch/arm/dts/bcm6855.dtsi  | 27 +++++++++++++++++++--------
 arch/arm/dts/bcm6878.dtsi  | 19 +++++++++++++++++++
 arch/arm/dts/bcm947622.dts |  4 ++++
 arch/arm/dts/bcm963138.dts |  4 ++++
 arch/arm/dts/bcm963148.dts |  4 ++++
 arch/arm/dts/bcm963178.dts |  4 ++++
 arch/arm/dts/bcm96756.dts  |  4 ++++
 arch/arm/dts/bcm96846.dts  |  4 ++++
 arch/arm/dts/bcm96855.dts  |  4 ++++
 arch/arm/dts/bcm96878.dts  |  4 ++++
 16 files changed, 180 insertions(+), 8 deletions(-)
arch/arm/dts/bcm47622.dtsi +18 -0
index c016e12b7372..86b1dff65aca 100644
@@ -83,6 +83,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -114,6 +120,18 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
arch/arm/dts/bcm63138.dtsi +18 -0
index 42b442aec9f4..2a673c39ba68 100644
@@ -60,6 +60,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	/* ARM bus */
@@ -145,5 +151,17 @@
 			clock-names = "refclk";
 			status = "disabled";
 		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
 	};
 };
arch/arm/dts/bcm63148.dtsi +18 -0
index df5307b6b3af..d9aed2bd7ff0 100644
@@ -59,6 +59,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <50000000>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -99,5 +105,17 @@
 			clock-names = "refclk";
 			status = "disabled";
 		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
 	};
 };
arch/arm/dts/bcm63178.dtsi +19 -0
index cbd094dde6d0..4c94d62e1a21 100644
@@ -70,6 +70,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -77,6 +78,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -108,6 +115,18 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
arch/arm/dts/bcm6756.dtsi +19 -0
index ce1b59faf800..cfabd22b0251 100644
@@ -87,6 +87,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -118,6 +124,19 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
arch/arm/dts/bcm6846.dtsi +18 -0
index 8aa47a2583b2..05e5870474b0 100644
@@ -60,6 +60,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -99,5 +105,17 @@
 			clock-names = "refclk";
 			status = "disabled";
 		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
 	};
 };
arch/arm/dts/bcm6855.dtsi +19 -8
index 10c003a57c95..59680a9aa2f5 100644
@@ -81,14 +81,6 @@
 			clock-mult = <1>;
 		};
 
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-mult = <2>;
-			clock-div = <1>;
-		};
-
 		wdt_clk: wdt-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -96,6 +88,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -128,6 +126,19 @@
 		ranges = <0 0xff800000 0x800000>;
 		bootph-all;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
arch/arm/dts/bcm6878.dtsi +19 -0
index 1e8b5fa96c25..ab08d2662162 100644
@@ -60,6 +60,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -67,6 +68,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -99,6 +106,18 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
arch/arm/dts/bcm947622.dts +4 -0
index 6f083724ab8e..93b8ce22678d 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm963138.dts +4 -0
index 6158a8733554..b3c57e6efc25 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm963148.dts +4 -0
index 98f6a6d09f50..1f5d6d783f09 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm963178.dts +4 -0
index fa096e9cde23..d036e99dd8d1 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm96756.dts +4 -0
index 9a4a87ba9c8a..8b104f3fb14a 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm96846.dts +4 -0
index c70ebccabc19..55852c229608 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm96855.dts +4 -0
index e4e740c73e97..cac2a40ef5c1 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm96878.dts +4 -0
index 8fbc175cb452..b7af8ade7a9d 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
Signature · 1 line
2.37.3
author maintainer
#3 lore raw

PATCH v2 3/9 arm64: dts: broadcom: bcmbca: Add spi controller node

In reply to William Zhang

Add support for HSSPI controller in ARMv8 chip dts files.

Port from linux patch:

---

Changes in v2: None

 arch/arm/dts/bcm4908.dtsi  | 17 +++++++++++++++++
 arch/arm/dts/bcm4912.dtsi  | 20 ++++++++++++++++++++
 arch/arm/dts/bcm63146.dtsi | 19 +++++++++++++++++++
 arch/arm/dts/bcm63158.dtsi | 15 ++++++---------
 arch/arm/dts/bcm6813.dtsi  | 20 ++++++++++++++++++++
 arch/arm/dts/bcm6856.dtsi  | 23 ++++++++++-------------
 arch/arm/dts/bcm6858.dtsi  | 23 ++++++++++-------------
 arch/arm/dts/bcm94908.dts  |  4 ++++
 arch/arm/dts/bcm94912.dts  |  4 ++++
 arch/arm/dts/bcm963146.dts |  4 ++++
 arch/arm/dts/bcm963158.dts |  4 ++++
 arch/arm/dts/bcm96813.dts  |  4 ++++
 arch/arm/dts/bcm96856.dts  |  4 ++++
 arch/arm/dts/bcm96858.dts  |  4 ++++
 14 files changed, 130 insertions(+), 35 deletions(-)
arch/arm/dts/bcm4908.dtsi +17 -0
index 0be5cfeeffa9..fc9874623b18 100644
@@ -106,6 +106,12 @@
 			clock-frequency = <50000000>;
 			clock-output-names = "periph";
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	bus@ff800000 {
@@ -123,5 +129,16 @@
 			status = "disabled";
 		};
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
 	};
 };
arch/arm/dts/bcm4912.dtsi +20 -0
index 3d016c2ce675..b10a0ae06187 100644
@@ -78,6 +78,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -85,6 +86,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -116,6 +123,19 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
arch/arm/dts/bcm63146.dtsi +19 -0
index 04de96bd0a03..48226cf1a7d4 100644
@@ -59,6 +59,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -66,6 +67,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -98,6 +105,18 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
arch/arm/dts/bcm63158.dtsi +6 -9
index 4bed1f914a9b..ffb824fe600d 100644
@@ -82,11 +82,9 @@
 		};
 
 		hsspi_pll: hsspi-pll {
-			compatible = "fixed-factor-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-mult = <2>;
-			clock-div = <1>;
+			clock-frequency = <400000000>;
 		};
 
 		uart_clk: uart-clk {
@@ -249,16 +247,15 @@
 			status = "disabled";
 		};
 
-		hsspi: spi-controller@1000 {
-			compatible = "brcm,bcm6328-hsspi";
+		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0";
 			reg = <0x1000 0x600>;
-			clocks = <&hsspi_pll>, <&hsspi_pll>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
 			clock-names = "hsspi", "pll";
-			spi-max-frequency = <100000000>;
 			num-cs = <8>;
-
 			status = "disabled";
 		};
 
arch/arm/dts/bcm6813.dtsi +20 -0
index c3e6197be808..eaa5ee889f51 100644
@@ -78,6 +78,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -85,6 +86,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -116,6 +123,19 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
arch/arm/dts/bcm6856.dtsi +10 -13
index 38c88f8399bb..245a7d65cf1b 100644
@@ -63,14 +63,6 @@
 			clock-frequency = <200000000>;
 		};
 
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-mult = <2>;
-			clock-div = <1>;
-		};
-
 		wdt_clk: wdt-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -78,6 +70,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -224,16 +222,15 @@
 			status = "disabled";
 		};
 
-		hsspi: spi-controller@1000 {
-			compatible = "brcm,bcm6328-hsspi";
+		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0";
 			reg = <0x1000 0x600>;
-			clocks = <&hsspi_pll>, <&hsspi_pll>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
 			clock-names = "hsspi", "pll";
-			spi-max-frequency = <100000000>;
 			num-cs = <8>;
-
 			status = "disabled";
 		};
 
arch/arm/dts/bcm6858.dtsi +10 -13
index dc95047a2659..ba30f70f1a9b 100644
@@ -82,14 +82,6 @@
 			clock-frequency = <200000000>;
 		};
 
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-mult = <2>;
-			clock-div = <1>;
-		};
-
 		wdt_clk: wdt-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -97,6 +89,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -243,16 +241,15 @@
 			status = "disabled";
 		};
 
-		hsspi: spi-controller@1000 {
-			compatible = "brcm,bcm6328-hsspi";
+		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0";
 			reg = <0x1000 0x600>;
-			clocks = <&hsspi_pll>, <&hsspi_pll>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
 			clock-names = "hsspi", "pll";
-			spi-max-frequency = <100000000>;
 			num-cs = <8>;
-
 			status = "disabled";
 		};
 
arch/arm/dts/bcm94908.dts +4 -0
index fcbd3c430ace..c4e6e71f6310 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm94912.dts +4 -0
index a3623e6f6919..e69cd683211a 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm963146.dts +4 -0
index e39f1e6d4774..db2c82d6dfd8 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm963158.dts +4 -0
index eba07e0b1ca6..25c12bc63545 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm96813.dts +4 -0
index af17091ae764..faba21f03120 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm96856.dts +4 -0
index 032aeb75c983..9808331eede2 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
arch/arm/dts/bcm96858.dts +4 -0
index 0cbf582f5d54..1f561c8e13b0 100644
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
Signature · 1 line
2.37.3
author maintainer
#4 lore raw

PATCH v2 4/9 spi: bcm63xx-hsspi: Enable SPI drivers by default

In reply to William Zhang

SPI controller is always presented in BCMBCA platform SoCs so enable the controller driver and SPI core by default.

---

Changes in v2: None

 arch/arm/Kconfig             |  2 ++
 arch/arm/mach-bcmbca/Kconfig | 11 +++++++++++
 drivers/spi/Kconfig          |  4 ++--
 3 files changed, 15 insertions(+), 2 deletions(-)
arch/arm/Kconfig +2 -0
index f0118e225419..4aa91282f649 100644
@@ -650,6 +650,8 @@ config ARCH_BCMSTB
 config ARCH_BCMBCA
 	bool "Broadcom broadband chip family"
 	select DM
+	select DM_SPI
+	select SPI
 	select OF_CONTROL
 	imply CMD_DM
 
arch/arm/mach-bcmbca/Kconfig +11 -0
index 62b371612b6a..6441ed5929d2 100644
@@ -11,6 +11,7 @@ config BCM47622
 	select CPU_V7A
 	select DM_SERIAL
 	select PL01X_SERIAL
+	select BCM63XX_HSSPI
 
 config BCM4908
 	bool "Support for Broadcom 4908 Family"
@@ -18,6 +19,7 @@ config BCM4908
 	select SYS_ARCH_TIMER
 	select DM_SERIAL
 	select BCM6345_SERIAL
+	select BCM63XX_HSSPI
 
 config BCM4912
 	bool "Support for Broadcom 4912 Family"
@@ -33,6 +35,7 @@ config BCM63138
 	select CPU_V7A
 	select DM_SERIAL
 	select BCM6345_SERIAL
+	select BCM63XX_HSSPI
 
 config BCM63146
 	bool "Support for Broadcom 63146 Family"
@@ -40,6 +43,7 @@ config BCM63146
 	select SYS_ARCH_TIMER
 	select DM_SERIAL
 	select PL01X_SERIAL
+	select BCM63XX_HSSPI
 
 config BCM63148
 	bool "Support for Broadcom 63148 Family"
@@ -47,6 +51,7 @@ config BCM63148
 	select CPU_V7A
 	select DM_SERIAL
 	select BCM6345_SERIAL
+	select BCM63XX_HSSPI
 
 config BCM63158
 	bool "Support for Broadcom 63158 Family"
@@ -54,6 +59,7 @@ config BCM63158
 	select SYS_ARCH_TIMER
 	select DM_SERIAL
 	select PL01X_SERIAL
+	select BCM63XX_HSSPI
 
 config BCM63178
 	bool "Support for Broadcom 63178 Family"
@@ -61,6 +67,7 @@ config BCM63178
 	select CPU_V7A
 	select DM_SERIAL
 	select PL01X_SERIAL
+	select BCM63XX_HSSPI
 
 config BCM6756
 	bool "Support for Broadcom 6756 Family"
@@ -82,6 +89,7 @@ config BCM6846
 	select CPU_V7A
 	select DM_SERIAL
 	select BCM6345_SERIAL
+	select BCM63XX_HSSPI
 
 config BCM6855
 	bool "Support for Broadcom 6855 Family"
@@ -99,6 +107,7 @@ config BCM6856
 	select SYS_ARCH_TIMER
 	select DM_SERIAL
 	select BCM6345_SERIAL
+	select BCM63XX_HSSPI
 	help
 	  Broadcom BCM6856 is a dual core Brahma-B53 ARMv8 based xPON Gateway
 	  SoC. This SoC family includes BCM6856, BCM6836 and BCM4910.
@@ -109,6 +118,7 @@ config BCM6858
 	select SYS_ARCH_TIMER
 	select DM_SERIAL
 	select BCM6345_SERIAL
+	select BCM63XX_HSSPI
 	help
 	  Broadcom BCM6858 is a quad core Brahma-B53 ARMv8 based xPON Gateway
 	  SoC. This SoC family includes BCM6858, BCM49508, BCM5504X and BCM6545.
@@ -119,6 +129,7 @@ config BCM6878
 	select CPU_V7A
 	select DM_SERIAL
 	select PL01X_SERIAL
+	select BCM63XX_HSSPI
 
 source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
 source "arch/arm/mach-bcmbca/bcm4908/Kconfig"
drivers/spi/Kconfig +2 -2
index 4f435fd26819..47a261f1e1b8 100644
@@ -101,9 +101,9 @@ config ATMEL_SPI
 
 config BCM63XX_HSSPI
 	bool "BCM63XX HSSPI driver"
-	depends on (ARCH_BMIPS || BCM6856 || BCM6858 || BCM63158)
+	depends on (ARCH_BMIPS || ARCH_BCMBCA)
 	help
-	  Enable the BCM6328 HSSPI driver. This driver can be used to
+	  Enable the BCM63XX HSSPI driver. This driver can be used to
 	  access the SPI NOR flash on platforms embedding this Broadcom
 	  SPI core.
 
Signature · 1 line
2.37.3
author maintainer
#5 lore raw

PATCH v2 5/9 spi: bcm63xx-hsspi: Add new compatible string support

In reply to William Zhang

New compatible string brcm,bcmbca-hsspi-v1.0 is introduced based on dts document brcm,bcm63xx-hsspi.yaml. Add it to the driver to support this new binding.

Port from linux patch:

---

Changes in v2: None

 drivers/spi/bcm63xx_hsspi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/spi/bcm63xx_hsspi.c +1 -0
index 4d714adc4afd..495feba02262 100644
@@ -310,6 +310,7 @@ static const struct dm_spi_ops bcm63xx_hsspi_ops = {
 
 static const struct udevice_id bcm63xx_hsspi_ids[] = {
 	{ .compatible = "brcm,bcm6328-hsspi", },
+	{ .compatible = "brcm,bcmbca-hsspi-v1.0", },
 	{ /* sentinel */ }
 };
 
Signature · 1 line
2.37.3
Reviewed-by on v2 5/9
#6 lore raw

Re: [PATCH v2 5/9] spi: bcm63xx-hsspi: Add new compatible string support

Quoted 10 lines · William Zhang

New compatible string brcm,bcmbca-hsspi-v1.0 is introduced based on dts document brcm,bcm63xx-hsspi.yaml. Add it to the driver to support this new binding.

Port from linux patch:

---

author maintainer
#7 lore raw

PATCH v2 6/9 spi: bcm63xx-hsspi: Fix multi-bit mode setting

In reply to William Zhang

Currently the driver always sets the controller to dual data bit mode for both tx and rx data in the profile mode control register even for single data bit transfer. Luckily the opcode is set correctly according to SPI transfer data bit width so it does not actually cause issues.

This change fixes the problem by setting tx and rx data bit mode field correctly according to the actual SPI transfer tx and rx data bit width.

Fixes 29cc4368ad4b ("dm: spi: add BCM63xx HSSPI driver")

Port from linux patch:

---

Changes in v2: None

 drivers/spi/bcm63xx_hsspi.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
drivers/spi/bcm63xx_hsspi.c +10 -7
index 495feba02262..0d12c345b1dd 100644
@@ -221,7 +221,7 @@ static int bcm63xx_hsspi_xfer(struct udevice *dev, unsigned int bitlen,
 	size_t data_bytes = bitlen / 8;
 	size_t step_size = HSSPI_FIFO_SIZE;
 	uint16_t opcode = 0;
-	uint32_t val;
+	uint32_t val = SPI_PFL_MODE_FILL_MASK;
 	const uint8_t *tx = dout;
 	uint8_t *rx = din;
 
@@ -240,14 +240,17 @@ static int bcm63xx_hsspi_xfer(struct udevice *dev, unsigned int bitlen,
 		step_size -= HSSPI_FIFO_OP_SIZE;
 
 	/* dual mode */
-	if ((opcode == HSSPI_FIFO_OP_CODE_R && plat->mode == SPI_RX_DUAL) ||
-	    (opcode == HSSPI_FIFO_OP_CODE_W && plat->mode == SPI_TX_DUAL))
+	if ((opcode == HSSPI_FIFO_OP_CODE_R && (plat->mode & SPI_RX_DUAL)) ||
+	    (opcode == HSSPI_FIFO_OP_CODE_W && (plat->mode & SPI_TX_DUAL))) {
 		opcode |= HSSPI_FIFO_OP_MBIT_MASK;
 
-	/* profile mode */
-	val = SPI_PFL_MODE_FILL_MASK |
-	      SPI_PFL_MODE_MDRDSZ_MASK |
-	      SPI_PFL_MODE_MDWRSZ_MASK;
+		/* profile mode */
+		if (plat->mode & SPI_RX_DUAL)
+			val |= SPI_PFL_MODE_MDRDSZ_MASK;
+		if (plat->mode & SPI_TX_DUAL)
+			val |= SPI_PFL_MODE_MDWRSZ_MASK;
+	}
+
 	if (plat->mode & SPI_3WIRE)
 		val |= SPI_PFL_MODE_3WIRE_MASK;
 	writel(val, priv->regs + SPI_PFL_MODE_REG(plat->cs));
Signature · 1 line
2.37.3
Reviewed-by on v2 6/9
#8 lore raw

Re: [PATCH v2 6/9] spi: bcm63xx-hsspi: Fix multi-bit mode setting

Quoted 9 lines · William Zhang

Currently the driver always sets the controller to dual data bit mode for both tx and rx data in the profile mode control register even for single data bit transfer. Luckily the opcode is set correctly according to SPI transfer data bit width so it does not actually cause issues.

This change fixes the problem by setting tx and rx data bit mode field correctly according to the actual SPI transfer tx and rx data bit width.

Quoted 7 lines
Fixes 29cc4368ad4b ("dm: spi: add BCM63xx HSSPI driver")

Port from linux patch:

---

author maintainer
#9 lore raw

PATCH v2 7/9 spi: bcm63xx-hsspi: Add prepend mode support

In reply to William Zhang

Due to the controller limitation to keep the chip select low during the bus idle time between the transfer, a dummy cs workaround was used when this driver was first upstreamed to the u-boot based on linux kernel driver. It basically picks the dummy cs as !actual_cs so typically dummy cs is 1 when most of the case only cs 0 is used in the board design. Then invert the polarity of both cs and tell the controller to start the transfers using dummy cs. Assuming both cs are active low before the inversion, effectively this keeps dummy cs high and actual cs low during the transfer and workaround the issue.

This workaround requires that dummy cs 1 pin to is set to SPI chip selection function in the pinmux when the transfer clock is above 25MHz. The old chips likely have default pinmux set to chip select on the dummy cs pin so it works but this is not case for the new Broadband BCA chips and this workaround stop working. This is specifically an issue to support SPI NAND and SPI NOR flash because these flash devices can typically run at or above 100MHz.

This patch utilizes the prepend feature of the controller to combine the multiple transfers in the same message to a single transfer when possible. This way there is no need to keep clock low between transfers and solve the issue without any pinmux requirement.

Multiple transfers within a SPI message may be combined into one transfer if the following are all true:
* One or more half duplex write transfer in single bit mode
* Optional full duplex read/write at the end
* No delay and cs_change between transfers

Most of the SPI device meets this requirements such as SPI NOR, SPI NAND flash, Broadcom SPI voice card and etc. So this change switches to the prepend mode as the default mode. For any SPI message that does not meet the above requirement, we switch to original dummy cs mode but limit the clock rate to the safe 25MHz.

Port from linux patch:

---

Changes in v2: None

 drivers/spi/bcm63xx_hsspi.c | 259 +++++++++++++++++++++++++++++++++---
 1 file changed, 242 insertions(+), 17 deletions(-)
drivers/spi/bcm63xx_hsspi.c +242 -17
index 0d12c345b1dd..a24bb430cbb4 100644
@@ -20,7 +20,13 @@
 
 #define HSSPI_PP			0
 
-#define SPI_MAX_SYNC_CLOCK		30000000
+/*
+ * The maximum frequency for SPI synchronous mode is 30MHz for some chips and
+ * 25MHz for some others. This depends on the chip layout and SPI signals
+ * distance to the pad. We use the lower of these values to cover all relevant
+ * chips.
+ */
+#define SPI_MAX_SYNC_CLOCK		25000000
 
 /* SPI Control register */
 #define SPI_CTL_REG			0x000
@@ -72,12 +78,16 @@
 #define SPI_PFL_MODE_REG(x)		(0x100 + (0x20 * (x)) + 0x08)
 #define SPI_PFL_MODE_FILL_SHIFT		0
 #define SPI_PFL_MODE_FILL_MASK		(0xff << SPI_PFL_MODE_FILL_SHIFT)
+#define SPI_PFL_MODE_MDRDST_SHIFT	8
+#define SPI_PFL_MODE_MDWRST_SHIFT	12
 #define SPI_PFL_MODE_MDRDSZ_SHIFT	16
 #define SPI_PFL_MODE_MDRDSZ_MASK	(1 << SPI_PFL_MODE_MDRDSZ_SHIFT)
 #define SPI_PFL_MODE_MDWRSZ_SHIFT	18
 #define SPI_PFL_MODE_MDWRSZ_MASK	(1 << SPI_PFL_MODE_MDWRSZ_SHIFT)
 #define SPI_PFL_MODE_3WIRE_SHIFT	20
 #define SPI_PFL_MODE_3WIRE_MASK		(1 << SPI_PFL_MODE_3WIRE_SHIFT)
+#define SPI_PFL_MODE_PREPCNT_SHIFT	24
+#define SPI_PFL_MODE_PREPCNT_MASK	(4 << SPI_PFL_MODE_PREPCNT_SHIFT)
 
 /* SPI Ping-Pong FIFO registers */
 #define HSSPI_FIFO_SIZE			0x200
@@ -96,12 +106,21 @@
 #define HSSPI_FIFO_OP_CODE_W		(2 << HSSPI_FIFO_OP_CODE_SHIFT)
 #define HSSPI_FIFO_OP_CODE_R		(3 << HSSPI_FIFO_OP_CODE_SHIFT)
 
+#define HSSPI_MAX_DATA_SIZE			(HSSPI_FIFO_SIZE - HSSPI_FIFO_OP_SIZE)
+#define HSSPI_MAX_PREPEND_SIZE		15
+
+#define HSSPI_XFER_MODE_PREPEND		0
+#define HSSPI_XFER_MODE_DUMMYCS		1
+
 struct bcm63xx_hsspi_priv {
 	void __iomem *regs;
 	ulong clk_rate;
 	uint8_t num_cs;
 	uint8_t cs_pols;
 	uint speed;
+	uint xfer_mode;
+	uint32_t prepend_cnt;
+	uint8_t prepend_buf[HSSPI_MAX_PREPEND_SIZE];
 };
 
 static int bcm63xx_hsspi_cs_info(struct udevice *bus, uint cs,
@@ -143,9 +162,16 @@ static void bcm63xx_hsspi_activate_cs(struct bcm63xx_hsspi_priv *priv,
 				   struct dm_spi_slave_plat *plat)
 {
 	uint32_t clr, set;
+	uint speed = priv->speed;
+
+	if (priv->xfer_mode == HSSPI_XFER_MODE_DUMMYCS &&
+	    speed > SPI_MAX_SYNC_CLOCK) {
+		speed = SPI_MAX_SYNC_CLOCK;
+		debug("Force to dummy cs mode. Reduce the speed to %dHz\n", speed);
+	}
 
 	/* profile clock */
-	set = DIV_ROUND_UP(priv->clk_rate, priv->speed);
+	set = DIV_ROUND_UP(priv->clk_rate, speed);
 	set = DIV_ROUND_UP(2048, set);
 	set &= SPI_PFL_CLK_FREQ_MASK;
 	set |= SPI_PFL_CLK_RSTLOOP_MASK;
@@ -164,7 +190,7 @@ static void bcm63xx_hsspi_activate_cs(struct bcm63xx_hsspi_priv *priv,
 		set |= SPI_PFL_SIG_LATCHRIS_MASK;
 
 	/* async clk */
-	if (priv->speed > SPI_MAX_SYNC_CLOCK)
+	if (speed > SPI_MAX_SYNC_CLOCK)
 		set |= SPI_PFL_SIG_ASYNCIN_MASK;
 
 	clrsetbits_32(priv->regs + SPI_PFL_SIG_REG(plat->cs), clr, set);
@@ -173,17 +199,24 @@ static void bcm63xx_hsspi_activate_cs(struct bcm63xx_hsspi_priv *priv,
 	set = 0;
 	clr = 0;
 
-	/* invert cs polarity */
-	if (priv->cs_pols & BIT(plat->cs))
-		clr |= BIT(plat->cs);
-	else
-		set |= BIT(plat->cs);
-
-	/* invert dummy cs polarity */
-	if (priv->cs_pols & BIT(!plat->cs))
-		clr |= BIT(!plat->cs);
-	else
-		set |= BIT(!plat->cs);
+	if (priv->xfer_mode == HSSPI_XFER_MODE_PREPEND) {
+		if (priv->cs_pols & BIT(plat->cs))
+			set |= BIT(plat->cs);
+		else
+			clr |= BIT(plat->cs);
+	} else {
+		/* invert cs polarity */
+		if (priv->cs_pols & BIT(plat->cs))
+			clr |= BIT(plat->cs);
+		else
+			set |= BIT(plat->cs);
+
+		/* invert dummy cs polarity */
+		if (priv->cs_pols & BIT(!plat->cs))
+			clr |= BIT(!plat->cs);
+		else
+			set |= BIT(!plat->cs);
+	}
 
 	clrsetbits_32(priv->regs + SPI_CTL_REG, clr, set);
 }
@@ -212,13 +245,18 @@ static void bcm63xx_hsspi_deactivate_cs(struct bcm63xx_hsspi_priv *priv)
  * all the time. This hack is also used in the upstream linux driver and
  * allows keeping CS active between transfers even if the HW doesn't give
  * this possibility.
+ *
+ * This workaround only works when the dummy CS (usually CS1 when the actual
+ * CS is 0) pinmuxed to SPI chip select function if SPI clock is faster than
+ * SPI_MAX_SYNC_CLOCK. In old broadcom chip, CS1 pin is default to chip select
+ * function. But this is not the case for new chips. To make this function
+ * always work, it should be called with maximum clock of SPI_MAX_SYNC_CLOCK.
  */
-static int bcm63xx_hsspi_xfer(struct udevice *dev, unsigned int bitlen,
-		const void *dout, void *din, unsigned long flags)
+static int bcm63xx_hsspi_xfer_dummy_cs(struct udevice *dev, unsigned int data_bytes,
+				       const void *dout, void *din, unsigned long flags)
 {
 	struct bcm63xx_hsspi_priv *priv = dev_get_priv(dev->parent);
 	struct dm_spi_slave_plat *plat = dev_get_parent_plat(dev);
-	size_t data_bytes = bitlen / 8;
 	size_t step_size = HSSPI_FIFO_SIZE;
 	uint16_t opcode = 0;
 	uint32_t val = SPI_PFL_MODE_FILL_MASK;
@@ -304,6 +342,182 @@ static int bcm63xx_hsspi_xfer(struct udevice *dev, unsigned int bitlen,
 	return 0;
 }
 
+static int bcm63xx_prepare_prepend_transfer(struct bcm63xx_hsspi_priv *priv,
+					    unsigned int data_bytes, const void *dout, void *din,
+					    unsigned long flags)
+{
+	/*
+	 * only support multiple half duplex write transfer + optional
+	 * full duplex read/write at the end.
+	 */
+	if (flags & SPI_XFER_BEGIN) {
+		/* clear prepends */
+		priv->prepend_cnt = 0;
+	}
+
+	if (din) {
+		/* buffering reads not possible for prepend mode */
+		if (!(flags & SPI_XFER_END)) {
+			debug("unable to buffer reads\n");
+			return HSSPI_XFER_MODE_DUMMYCS;
+		}
+
+		/* check rx size */
+		if (data_bytes > HSSPI_MAX_DATA_SIZE) {
+			debug("max rx bytes exceeded\n");
+			return HSSPI_XFER_MODE_DUMMYCS;
+		}
+	}
+
+	if (dout) {
+		/* check tx size */
+		if (flags & SPI_XFER_END) {
+			if (priv->prepend_cnt + data_bytes > HSSPI_MAX_DATA_SIZE) {
+				debug("max tx bytes exceeded\n");
+				return HSSPI_XFER_MODE_DUMMYCS;
+			}
+		} else {
+			if (priv->prepend_cnt + data_bytes > HSSPI_MAX_PREPEND_SIZE) {
+				debug("max prepend bytes exceeded\n");
+				return HSSPI_XFER_MODE_DUMMYCS;
+			}
+
+			/*
+			 * buffer transfer data in the prepend buf in case we have to fall
+			 * back to dummy cs mode.
+			 */
+			memcpy(&priv->prepend_buf[priv->prepend_cnt], dout, data_bytes);
+			priv->prepend_cnt += data_bytes;
+		}
+	}
+
+	return	HSSPI_XFER_MODE_PREPEND;
+}
+
+static int bcm63xx_hsspi_xfer_prepend(struct udevice *dev, unsigned int data_bytes,
+				      const void *dout, void *din, unsigned long flags)
+{
+	struct bcm63xx_hsspi_priv *priv = dev_get_priv(dev->parent);
+	struct dm_spi_slave_plat *plat = dev_get_parent_plat(dev);
+	uint16_t opcode = 0;
+	uint32_t val, offset;
+	int ret;
+
+	if (flags & SPI_XFER_END) {
+		offset = HSSPI_FIFO_BASE + HSSPI_FIFO_OP_SIZE;
+		if (priv->prepend_cnt) {
+			/* copy prepend data */
+			memcpy_toio(priv->regs + offset,
+				    priv->prepend_buf, priv->prepend_cnt);
+		}
+
+		if (dout && data_bytes) {
+			/* copy tx data */
+			offset += priv->prepend_cnt;
+			memcpy_toio(priv->regs + offset, dout, data_bytes);
+		}
+
+		bcm63xx_hsspi_activate_cs(priv, plat);
+		if (dout && !din) {
+			/* all half-duplex write. merge to single write */
+			data_bytes += priv->prepend_cnt;
+			opcode = HSSPI_FIFO_OP_CODE_W;
+			priv->prepend_cnt = 0;
+		} else if (!dout && din) {
+			/* half-duplex read with prepend write */
+			opcode = HSSPI_FIFO_OP_CODE_R;
+		} else {
+			/* full duplex read/write */
+			opcode = HSSPI_FIFO_OP_READ_WRITE;
+		}
+
+		/* profile mode */
+		val = SPI_PFL_MODE_FILL_MASK;
+		if (plat->mode & SPI_3WIRE)
+			val |= SPI_PFL_MODE_3WIRE_MASK;
+
+		/* dual mode */
+		if ((opcode == HSSPI_FIFO_OP_CODE_R && (plat->mode & SPI_RX_DUAL)) ||
+		    (opcode == HSSPI_FIFO_OP_CODE_W && (plat->mode & SPI_TX_DUAL))) {
+			opcode |= HSSPI_FIFO_OP_MBIT_MASK;
+
+			if (plat->mode & SPI_RX_DUAL) {
+				val |= SPI_PFL_MODE_MDRDSZ_MASK;
+				val |= priv->prepend_cnt << SPI_PFL_MODE_MDRDST_SHIFT;
+			}
+			if (plat->mode & SPI_TX_DUAL) {
+				val |= SPI_PFL_MODE_MDWRSZ_MASK;
+				val |= priv->prepend_cnt << SPI_PFL_MODE_MDWRST_SHIFT;
+			}
+		}
+		val |= (priv->prepend_cnt << SPI_PFL_MODE_PREPCNT_SHIFT);
+		writel(val, priv->regs + SPI_PFL_MODE_REG(plat->cs));
+
+		/* set fifo operation */
+		val = opcode | (data_bytes & HSSPI_FIFO_OP_BYTES_MASK);
+		writew(cpu_to_be16(val),
+		       priv->regs + HSSPI_FIFO_OP_REG);
+
+		/* issue the transfer */
+		val = SPI_CMD_OP_START;
+		val |= (plat->cs << SPI_CMD_PFL_SHIFT) &
+		       SPI_CMD_PFL_MASK;
+		val |= (plat->cs << SPI_CMD_SLAVE_SHIFT) &
+		       SPI_CMD_SLAVE_MASK;
+		writel(val, priv->regs + SPI_CMD_REG);
+
+		/* wait for completion */
+		ret = wait_for_bit_32(priv->regs + SPI_STAT_REG,
+				      SPI_STAT_SRCBUSY_MASK, false,
+				      1000, false);
+		if (ret) {
+			bcm63xx_hsspi_deactivate_cs(priv);
+			printf("spi polling timeout\n");
+			return ret;
+		}
+
+		/* copy rx data */
+		if (din)
+			memcpy_fromio(din, priv->regs + HSSPI_FIFO_BASE,
+				      data_bytes);
+		bcm63xx_hsspi_deactivate_cs(priv);
+	}
+
+	return 0;
+}
+
+static int bcm63xx_hsspi_xfer(struct udevice *dev, unsigned int bitlen,
+			      const void *dout, void *din, unsigned long flags)
+{
+	struct bcm63xx_hsspi_priv *priv = dev_get_priv(dev->parent);
+	int ret;
+	u32 data_bytes = bitlen >> 3;
+
+	if (priv->xfer_mode == HSSPI_XFER_MODE_PREPEND) {
+		priv->xfer_mode =
+			bcm63xx_prepare_prepend_transfer(priv, data_bytes, dout, din, flags);
+	}
+
+	/* if not prependable, fall back to dummy cs mode with safe clock */
+	if (priv->xfer_mode == HSSPI_XFER_MODE_DUMMYCS) {
+		/* For pending prepend data from previous transfers, send it first */
+		if (priv->prepend_cnt) {
+			bcm63xx_hsspi_xfer_dummy_cs(dev, priv->prepend_cnt,
+						    priv->prepend_buf, NULL,
+						    (flags & ~SPI_XFER_END) | SPI_XFER_BEGIN);
+			priv->prepend_cnt = 0;
+		}
+		ret = bcm63xx_hsspi_xfer_dummy_cs(dev, data_bytes, dout, din, flags);
+	} else {
+		ret = bcm63xx_hsspi_xfer_prepend(dev, data_bytes, dout, din, flags);
+	}
+
+	if (flags & SPI_XFER_END)
+		priv->xfer_mode = HSSPI_XFER_MODE_PREPEND;
+
+	return ret;
+}
+
 static const struct dm_spi_ops bcm63xx_hsspi_ops = {
 	.cs_info = bcm63xx_hsspi_cs_info,
 	.set_mode = bcm63xx_hsspi_set_mode,
@@ -321,6 +535,7 @@ static int bcm63xx_hsspi_child_pre_probe(struct udevice *dev)
 {
 	struct bcm63xx_hsspi_priv *priv = dev_get_priv(dev->parent);
 	struct dm_spi_slave_plat *plat = dev_get_parent_plat(dev);
+	struct spi_slave *slave = dev_get_parent_priv(dev);
 
 	/* check cs */
 	if (plat->cs >= priv->num_cs) {
@@ -334,6 +549,13 @@ static int bcm63xx_hsspi_child_pre_probe(struct udevice *dev)
 	else
 		priv->cs_pols &= ~BIT(plat->cs);
 
+	/*
+	 * set the max read/write size to make sure each xfer are within the
+	 * prepend limit
+	 */
+	slave->max_read_size = HSSPI_MAX_DATA_SIZE;
+	slave->max_write_size = HSSPI_MAX_DATA_SIZE;
+
 	return 0;
 }
 
@@ -395,6 +617,9 @@ static int bcm63xx_hsspi_probe(struct udevice *dev)
 	priv->cs_pols = readl(priv->regs + SPI_CTL_REG) &
 			SPI_CTL_CS_POL_MASK;
 
+	/* default in prepend mode */
+	priv->xfer_mode = HSSPI_XFER_MODE_PREPEND;
+
 	return 0;
 }
 
Signature · 1 line
2.37.3
author maintainer
#10 lore raw

PATCH v2 8/9 spi: bcmbca-hsspi: Add driver for newer HSSPI controller

In reply to William Zhang

The newer BCMBCA SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI controller that add the capability to allow the driver to control chip select explicitly. Driver can control and keep cs low between the transfers natively. Hence the dummy cs workaround or prepend mode found in the bcm63xx-hsspi driver are no longer needed and this new driver is much cleaner.

Port from linux patch:

---

Changes in v2: None

 arch/arm/mach-bcmbca/Kconfig |  15 ++
 drivers/spi/Kconfig          |   9 +
 drivers/spi/Makefile         |   1 +
 drivers/spi/bcmbca_hsspi.c   | 414 +++++++++++++++++++++++++++++++++++
 4 files changed, 439 insertions(+)
 create mode 100644 drivers/spi/bcmbca_hsspi.c
arch/arm/mach-bcmbca/Kconfig +15 -0
index 6441ed5929d2..60b36c4bb0f6 100644
@@ -27,6 +27,7 @@ config BCM4912
 	select SYS_ARCH_TIMER
 	select DM_SERIAL
 	select PL01X_SERIAL
+	select BCMBCA_HSSPI
 
 config BCM63138
 	bool "Support for Broadcom 63138 Family"
@@ -75,6 +76,7 @@ config BCM6756
 	select CPU_V7A
 	select DM_SERIAL
 	select PL01X_SERIAL
+	select BCMBCA_HSSPI
 
 config BCM6813
 	bool "Support for Broadcom 6813 Family"
@@ -82,6 +84,7 @@ config BCM6813
 	select SYS_ARCH_TIMER
 	select DM_SERIAL
 	select PL01X_SERIAL
+	select BCMBCA_HSSPI
 
 config BCM6846
 	bool "Support for Broadcom 6846 Family"
@@ -97,6 +100,7 @@ config BCM6855
 	select CPU_V7A
 	select DM_SERIAL
 	select PL01X_SERIAL
+	select BCMBCA_HSSPI
 	help
 	  Broadcom BCM6855 is a triple core Cortex A7 based xPON Gateway
 	  SoC. This SoC family includes BCM6855x, BCM68252 and BCM6753.
@@ -131,6 +135,17 @@ config BCM6878
 	select PL01X_SERIAL
 	select BCM63XX_HSSPI
 
+config HAVE_SPI_CS_CTRL
+	bool "SoC supports SPI chip select control"
+	default y if BCM4912
+	default y if BCM6756
+	default y if BCM6855
+	default y if BCM6813
+	default n
+	help
+	  Enable this option if SoC supports SPI chip select control explicitly
+	  through software.
+
 source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
 source "arch/arm/mach-bcmbca/bcm4908/Kconfig"
 source "arch/arm/mach-bcmbca/bcm4912/Kconfig"
drivers/spi/Kconfig +9 -0
index 47a261f1e1b8..6b26915f9bb2 100644
@@ -107,6 +107,15 @@ config BCM63XX_HSSPI
 	  access the SPI NOR flash on platforms embedding this Broadcom
 	  SPI core.
 
+config BCMBCA_HSSPI
+	bool "BCMBCA HSSPI driver"
+	depends on ARCH_BCMBCA && HAVE_SPI_CS_CTRL
+	help
+	  This enables support for the High Speed SPI controller present on
+	  newer Broadcom BCMBCA SoCs. These SoCs include an updated SPI controller
+	  that adds the capability to allow the driver to control chip select
+	  explicitly.
+
 config BCM63XX_SPI
 	bool "BCM6348 SPI driver"
 	depends on ARCH_BMIPS
drivers/spi/Makefile +1 -0
index 95dba9ac4559..c27b3327c337 100644
@@ -25,6 +25,7 @@ obj-$(CONFIG_ATH79_SPI) += ath79_spi.o
 obj-$(CONFIG_ATMEL_QSPI) += atmel-quadspi.o
 obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o
 obj-$(CONFIG_BCM63XX_HSSPI) += bcm63xx_hsspi.o
+obj-$(CONFIG_BCMBCA_HSSPI) += bcmbca_hsspi.o
 obj-$(CONFIG_BCM63XX_SPI) += bcm63xx_spi.o
 obj-$(CONFIG_BCMSTB_SPI) += bcmstb_spi.o
 obj-$(CONFIG_CF_SPI) += cf_spi.o
drivers/spi/bcmbca_hsspi.c new file +414 -0

414 lines not on this page · raw message

Signature · 1 line
2.37.3
#11 lore raw

Re: [PATCH v2 8/9] spi: bcmbca-hsspi: Add driver for newer HSSPI controller

Quoted 9 lines · William Zhang

The newer BCMBCA SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI controller that add the capability to allow the driver to control chip select explicitly. Driver can control and keep cs low between the transfers natively. Hence the dummy cs workaround or prepend mode found in the bcm63xx-hsspi driver are no longer needed and this new driver is much cleaner.

Port from linux patch:

Quoted 8 lines

---

Changes in v2: None

 arch/arm/mach-bcmbca/Kconfig |  15 ++

Exclude this from spi driver patch. Driver has to be a separate patch.

Quoted 43 lines
 drivers/spi/Kconfig          |   9 +
 drivers/spi/Makefile         |   1 +
 drivers/spi/bcmbca_hsspi.c   | 414 +++++++++++++++++++++++++++++++++++
 4 files changed, 439 insertions(+)
 create mode 100644 drivers/spi/bcmbca_hsspi.c
arch/arm/mach-bcmbca/Kconfig +4 -0
index 6441ed5929d2..60b36c4bb0f6 100644
@@ -27,6 +27,7 @@ config BCM4912
        select SYS_ARCH_TIMER
        select DM_SERIAL
        select PL01X_SERIAL
+       select BCMBCA_HSSPI
 
 config BCM63138
        bool "Support for Broadcom 63138 Family"
@@ -75,6 +76,7 @@ config BCM6756
        select CPU_V7A
        select DM_SERIAL
        select PL01X_SERIAL
+       select BCMBCA_HSSPI
 
 config BCM6813
        bool "Support for Broadcom 6813 Family"
@@ -82,6 +84,7 @@ config BCM6813
        select SYS_ARCH_TIMER
        select DM_SERIAL
        select PL01X_SERIAL
+       select BCMBCA_HSSPI
 
 config BCM6846
        bool "Support for Broadcom 6846 Family"
@@ -97,6 +100,7 @@ config BCM6855
        select CPU_V7A
        select DM_SERIAL
        select PL01X_SERIAL
+       select BCMBCA_HSSPI
        help
          Broadcom BCM6855 is a triple core Cortex A7 based xPON Gateway
          SoC. This SoC family includes BCM6855x, BCM68252 and BCM6753.

arch/arm/mach-bcmbca/Kconfig config BCM6878 · line 143

Quoted 9 lines
arch/arm/mach-bcmbca/Kconfig +6 -0
@@ -131,6 +135,17 @@ config BCM6878
        select PL01X_SERIAL
        select BCM63XX_HSSPI
 
+config HAVE_SPI_CS_CTRL
+       bool "SoC supports SPI chip select control"
+       default y if BCM4912
+       default y if BCM6756
+       default y if BCM6855
+       default y if BCM6813

Use ||

Quoted 58 lines
arch/arm/mach-bcmbca/Kconfig +5 -0
+       default n
+       help
+         Enable this option if SoC supports SPI chip select control explicitly
+         through software.
+
 source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
 source "arch/arm/mach-bcmbca/bcm4908/Kconfig"
 source "arch/arm/mach-bcmbca/bcm4912/Kconfig"
drivers/spi/Kconfig +9 -0
index 47a261f1e1b8..6b26915f9bb2 100644
@@ -107,6 +107,15 @@ config BCM63XX_HSSPI
          access the SPI NOR flash on platforms embedding this Broadcom
          SPI core.
 
+config BCMBCA_HSSPI
+       bool "BCMBCA HSSPI driver"
+       depends on ARCH_BCMBCA && HAVE_SPI_CS_CTRL
+       help
+         This enables support for the High Speed SPI controller present on
+         newer Broadcom BCMBCA SoCs. These SoCs include an updated SPI controller
+         that adds the capability to allow the driver to control chip select
+         explicitly.
+
 config BCM63XX_SPI
        bool "BCM6348 SPI driver"
        depends on ARCH_BMIPS
drivers/spi/Makefile +1 -0
index 95dba9ac4559..c27b3327c337 100644
@@ -25,6 +25,7 @@ obj-$(CONFIG_ATH79_SPI) += ath79_spi.o
 obj-$(CONFIG_ATMEL_QSPI) += atmel-quadspi.o
 obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o
 obj-$(CONFIG_BCM63XX_HSSPI) += bcm63xx_hsspi.o
+obj-$(CONFIG_BCMBCA_HSSPI) += bcmbca_hsspi.o
 obj-$(CONFIG_BCM63XX_SPI) += bcm63xx_spi.o
 obj-$(CONFIG_BCMSTB_SPI) += bcmstb_spi.o
 obj-$(CONFIG_CF_SPI) += cf_spi.o
drivers/spi/bcmbca_hsspi.c new file +12 -0
new file mode 100644
index 000000000000..fbe315a7d45d
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <[email protected]>
+ *
+ * Derived from linux/drivers/spi/spi-bcm63xx-hsspi.c:
+ *     Copyright (C) 2000-2010 Broadcom Corporation
+ *     Copyright (C) 2012-2013 Jonas Gorski <[email protected]>
+ *     Copyright (C) 2021 Broadcom Ltd
+ */
+
+#include <common.h>
+#include <asm/io.h>

drivers/spi/bcmbca_hsspi.c line 22

Quoted 10 lines
drivers/spi/bcmbca_hsspi.c new file +10 -0
+#include <clk.h>
+#include <spi.h>
+#include <reset.h>
+#include <wait_bit.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+
+#define HSSPI_PP                       0
+
+#define SPI_MAX_SYNC_CLOCK             30000000

What is this clock? spi-max-frequency ? if yes pick it from DT.

Quoted 145 lines
drivers/spi/bcmbca_hsspi.c new file +145 -0
+
+/* SPI Control register */
+#define SPI_CTL_REG                    0x000
+#define SPI_CTL_CS_POL_SHIFT           0
+#define SPI_CTL_CS_POL_MASK            (0xff << SPI_CTL_CS_POL_SHIFT)
+#define SPI_CTL_CLK_GATE_SHIFT         16
+#define SPI_CTL_CLK_GATE_MASK          BIT(SPI_CTL_CLK_GATE_SHIFT)
+#define SPI_CTL_CLK_POL_SHIFT          17
+#define SPI_CTL_CLK_POL_MASK           BIT(SPI_CTL_CLK_POL_SHIFT)
+
+/* SPI Interrupts registers */
+#define SPI_IR_STAT_REG                        0x008
+#define SPI_IR_ST_MASK_REG             0x00c
+#define SPI_IR_MASK_REG                        0x010
+
+#define SPI_IR_CLEAR_ALL               0xff001f1f
+
+/* SPI Ping-Pong Command registers */
+#define SPI_CMD_REG                    (0x080 + (0x40 * (HSSPI_PP)) + 0x00)
+#define SPI_CMD_OP_SHIFT               0
+#define SPI_CMD_OP_START               BIT(SPI_CMD_OP_SHIFT)
+#define SPI_CMD_PFL_SHIFT              8
+#define SPI_CMD_PFL_MASK               (0x7 << SPI_CMD_PFL_SHIFT)
+#define SPI_CMD_SLAVE_SHIFT            12
+#define SPI_CMD_SLAVE_MASK             (0x7 << SPI_CMD_SLAVE_SHIFT)
+
+/* SPI Ping-Pong Status registers */
+#define SPI_STAT_REG                   (0x080 + (0x40 * (HSSPI_PP)) + 0x04)
+#define SPI_STAT_SRCBUSY_SHIFT         1
+#define SPI_STAT_SRCBUSY_MASK          BIT(SPI_STAT_SRCBUSY_SHIFT)
+
+/* SPI Profile Clock registers */
+#define SPI_PFL_CLK_REG(x)             (0x100 + (0x20 * (x)) + 0x00)
+#define SPI_PFL_CLK_FREQ_SHIFT         0
+#define SPI_PFL_CLK_FREQ_MASK          (0x3fff << SPI_PFL_CLK_FREQ_SHIFT)
+#define SPI_PFL_CLK_RSTLOOP_SHIFT      15
+#define SPI_PFL_CLK_RSTLOOP_MASK       BIT(SPI_PFL_CLK_RSTLOOP_SHIFT)
+
+/* SPI Profile Signal registers */
+#define SPI_PFL_SIG_REG(x)             (0x100 + (0x20 * (x)) + 0x04)
+#define SPI_PFL_SIG_LATCHRIS_SHIFT     12
+#define SPI_PFL_SIG_LATCHRIS_MASK      BIT(SPI_PFL_SIG_LATCHRIS_SHIFT)
+#define SPI_PFL_SIG_LAUNCHRIS_SHIFT    13
+#define SPI_PFL_SIG_LAUNCHRIS_MASK     BIT(SPI_PFL_SIG_LAUNCHRIS_SHIFT)
+#define SPI_PFL_SIG_ASYNCIN_SHIFT      16
+#define SPI_PFL_SIG_ASYNCIN_MASK       BIT(SPI_PFL_SIG_ASYNCIN_SHIFT)
+
+/* SPI Profile Mode registers */
+#define SPI_PFL_MODE_REG(x)            (0x100 + (0x20 * (x)) + 0x08)
+#define SPI_PFL_MODE_FILL_SHIFT                0
+#define SPI_PFL_MODE_FILL_MASK         (0xff << SPI_PFL_MODE_FILL_SHIFT)
+#define SPI_PFL_MODE_MDRDSZ_SHIFT      16
+#define SPI_PFL_MODE_MDRDSZ_MASK       BIT(SPI_PFL_MODE_MDRDSZ_SHIFT)
+#define SPI_PFL_MODE_MDWRSZ_SHIFT      18
+#define SPI_PFL_MODE_MDWRSZ_MASK       BIT(SPI_PFL_MODE_MDWRSZ_SHIFT)
+#define SPI_PFL_MODE_3WIRE_SHIFT       20
+#define SPI_PFL_MODE_3WIRE_MASK                BIT(SPI_PFL_MODE_3WIRE_SHIFT)
+
+/* SPI Ping-Pong FIFO registers */
+#define HSSPI_FIFO_SIZE                        0x200
+#define HSSPI_FIFO_BASE                        (0x200 + \
+                                        (HSSPI_FIFO_SIZE * HSSPI_PP))
+
+/* SPI Ping-Pong FIFO OP register */
+#define HSSPI_FIFO_OP_SIZE             0x2
+#define HSSPI_FIFO_OP_REG              (HSSPI_FIFO_BASE + 0x00)
+#define HSSPI_FIFO_OP_BYTES_SHIFT      0
+#define HSSPI_FIFO_OP_BYTES_MASK       (0x3ff << HSSPI_FIFO_OP_BYTES_SHIFT)
+#define HSSPI_FIFO_OP_MBIT_SHIFT       11
+#define HSSPI_FIFO_OP_MBIT_MASK                BIT(HSSPI_FIFO_OP_MBIT_SHIFT)
+#define HSSPI_FIFO_OP_CODE_SHIFT       13
+#define HSSPI_FIFO_OP_READ_WRITE       (1 << HSSPI_FIFO_OP_CODE_SHIFT)
+#define HSSPI_FIFO_OP_CODE_W           (2 << HSSPI_FIFO_OP_CODE_SHIFT)
+#define HSSPI_FIFO_OP_CODE_R           (3 << HSSPI_FIFO_OP_CODE_SHIFT)
+
+#define HSSPI_MAX_DATA_SIZE            (HSSPI_FIFO_SIZE - HSSPI_FIFO_OP_SIZE)
+
+#define SPIM_CTRL_CS_OVERRIDE_SEL_SHIFT                0
+#define SPIM_CTRL_CS_OVERRIDE_SEL_MASK         0xff
+#define SPIM_CTRL_CS_OVERRIDE_VAL_SHIFT                8
+#define SPIM_CTRL_CS_OVERRIDE_VAL_MASK         0xff
+
+struct bcmbca_hsspi_priv {
+       void __iomem *regs;
+       void __iomem *spim_ctrl;
+       u32 clk_rate;
+       u8 num_cs;
+       u8 cs_pols;
+       u32 speed;
+};
+
+static int bcmbca_hsspi_cs_info(struct udevice *bus, uint cs,
+                               struct spi_cs_info *info)
+{
+       struct bcmbca_hsspi_priv *priv = dev_get_priv(bus);
+
+       if (cs >= priv->num_cs) {
+               dev_err(bus, "no cs %u\n", cs);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int bcmbca_hsspi_set_mode(struct udevice *bus, uint mode)
+{
+       struct bcmbca_hsspi_priv *priv = dev_get_priv(bus);
+
+       /* clock polarity */
+       if (mode & SPI_CPOL)
+               setbits_32(priv->regs + SPI_CTL_REG, SPI_CTL_CLK_POL_MASK);
+       else
+               clrbits_32(priv->regs + SPI_CTL_REG, SPI_CTL_CLK_POL_MASK);
+
+       return 0;
+}
+
+static int bcmbca_hsspi_set_speed(struct udevice *bus, uint speed)
+{
+       struct bcmbca_hsspi_priv *priv = dev_get_priv(bus);
+
+       priv->speed = speed;
+
+       return 0;
+}
+
+static void bcmbca_hsspi_setup_clock(struct bcmbca_hsspi_priv *priv,
+                                    struct dm_spi_slave_plat *plat)
+{
+       u32 clr, set;
+
+       /* profile clock */
+       set = DIV_ROUND_UP(priv->clk_rate, priv->speed);
+       set = DIV_ROUND_UP(2048, set);
+       set &= SPI_PFL_CLK_FREQ_MASK;
+       set |= SPI_PFL_CLK_RSTLOOP_MASK;
+       writel(set, priv->regs + SPI_PFL_CLK_REG(plat->cs));
+
+       /* profile signal */
+       set = 0;
+       clr = SPI_PFL_SIG_LAUNCHRIS_MASK |
+             SPI_PFL_SIG_LATCHRIS_MASK |
+             SPI_PFL_SIG_ASYNCIN_MASK;
+
+       /* latch/launch config */

drivers/spi/bcmbca_hsspi.c line 177

Quoted 10 lines
drivers/spi/bcmbca_hsspi.c new file +10 -0
+       if (plat->mode & SPI_CPHA)
+               set |= SPI_PFL_SIG_LAUNCHRIS_MASK;
+       else
+               set |= SPI_PFL_SIG_LATCHRIS_MASK;
+
+       /* async clk */
+       if (priv->speed > SPI_MAX_SYNC_CLOCK)
+               set |= SPI_PFL_SIG_ASYNCIN_MASK;
+
+       clrsetbits_32(priv->regs + SPI_PFL_SIG_REG(plat->cs), clr, set);

I think this won't change every time cs changes, isn't it? if so mode code has to move set_mode and the speed code has to move set_speed.

Quoted 159 lines
drivers/spi/bcmbca_hsspi.c new file +159 -0
+
+       /* global control */
+       set = 0;
+       clr = 0;
+
+       if (priv->cs_pols & BIT(plat->cs))
+               set |= BIT(plat->cs);
+       else
+               clr |= BIT(plat->cs);
+
+       clrsetbits_32(priv->regs + SPI_CTL_REG, clr, set);
+}
+
+static void bcmbca_hsspi_activate_cs(struct bcmbca_hsspi_priv *priv,
+                                    struct dm_spi_slave_plat *plat)
+{
+       u32 val;
+
+       /* set the override bit */
+       val = readl(priv->spim_ctrl);
+       val |= BIT(plat->cs + SPIM_CTRL_CS_OVERRIDE_SEL_SHIFT);
+       writel(val, priv->spim_ctrl);
+}
+
+static void bcmbca_hsspi_deactivate_cs(struct bcmbca_hsspi_priv *priv,
+                                      struct dm_spi_slave_plat *plat)
+{
+       u32 val;
+
+       /* clear the cs override bit */
+       val = readl(priv->spim_ctrl);
+       val &= ~BIT(plat->cs + SPIM_CTRL_CS_OVERRIDE_SEL_SHIFT);
+       writel(val, priv->spim_ctrl);
+}
+
+static int bcmbca_hsspi_xfer(struct udevice *dev, unsigned int bitlen,
+                            const void *dout, void *din, unsigned long flags)
+{
+       struct bcmbca_hsspi_priv *priv = dev_get_priv(dev->parent);
+       struct dm_spi_slave_plat *plat = dev_get_parent_plat(dev);
+       size_t data_bytes = bitlen / 8;
+       size_t step_size = HSSPI_FIFO_SIZE;
+       u16 opcode = 0;
+       u32 val = SPI_PFL_MODE_FILL_MASK;
+       const u8 *tx = dout;
+       u8 *rx = din;
+       u32 cs_act = 0;
+
+       if (flags & SPI_XFER_BEGIN)
+               bcmbca_hsspi_setup_clock(priv, plat);
+
+       /* fifo operation */
+       if (tx && rx)
+               opcode = HSSPI_FIFO_OP_READ_WRITE;
+       else if (rx)
+               opcode = HSSPI_FIFO_OP_CODE_R;
+       else if (tx)
+               opcode = HSSPI_FIFO_OP_CODE_W;
+
+       if (opcode != HSSPI_FIFO_OP_CODE_R)
+               step_size -= HSSPI_FIFO_OP_SIZE;
+
+       /* dual mode */
+       if ((opcode == HSSPI_FIFO_OP_CODE_R && (plat->mode & SPI_RX_DUAL)) ||
+           (opcode == HSSPI_FIFO_OP_CODE_W && (plat->mode & SPI_TX_DUAL))) {
+               opcode |= HSSPI_FIFO_OP_MBIT_MASK;
+
+               /* profile mode */
+               if (plat->mode & SPI_RX_DUAL)
+                       val |= SPI_PFL_MODE_MDRDSZ_MASK;
+               if (plat->mode & SPI_TX_DUAL)
+                       val |= SPI_PFL_MODE_MDWRSZ_MASK;
+       }
+
+       if (plat->mode & SPI_3WIRE)
+               val |= SPI_PFL_MODE_3WIRE_MASK;
+       writel(val, priv->regs + SPI_PFL_MODE_REG(plat->cs));
+
+       /* transfer loop */
+       while (data_bytes > 0) {
+               size_t curr_step = min(step_size, data_bytes);
+               int ret;
+
+               /* copy tx data */
+               if (tx) {
+                       memcpy_toio(priv->regs + HSSPI_FIFO_BASE +
+                                   HSSPI_FIFO_OP_SIZE, tx, curr_step);
+                       tx += curr_step;
+               }
+
+               /* set fifo operation */
+               writew(cpu_to_be16(opcode | (curr_step & HSSPI_FIFO_OP_BYTES_MASK)),
+                      priv->regs + HSSPI_FIFO_OP_REG);
+
+               /* make sure we keep cs active until spi transfer is done */
+               if (!cs_act) {
+                       bcmbca_hsspi_activate_cs(priv, plat);
+                       cs_act = 1;
+               }
+
+               /* issue the transfer */
+               val = SPI_CMD_OP_START;
+               val |= (plat->cs << SPI_CMD_PFL_SHIFT) &
+                         SPI_CMD_PFL_MASK;
+               val |= (plat->cs << SPI_CMD_SLAVE_SHIFT) &
+                         SPI_CMD_SLAVE_MASK;
+               writel(val, priv->regs + SPI_CMD_REG);
+
+               /* wait for completion */
+               ret = wait_for_bit_32(priv->regs + SPI_STAT_REG,
+                                     SPI_STAT_SRCBUSY_MASK, false,
+                                     1000, false);
+               if (ret) {
+                       bcmbca_hsspi_deactivate_cs(priv, plat);
+                       dev_err(dev, "interrupt timeout\n");
+                       return ret;
+               }
+
+               data_bytes -= curr_step;
+               if ((flags & SPI_XFER_END) && !data_bytes)
+                       bcmbca_hsspi_deactivate_cs(priv, plat);
+
+               /* copy rx data */
+               if (rx) {
+                       memcpy_fromio(rx, priv->regs + HSSPI_FIFO_BASE,
+                                     curr_step);
+                       rx += curr_step;
+               }
+       }
+
+       return 0;
+}
+
+static const struct dm_spi_ops bcmbca_hsspi_ops = {
+       .cs_info = bcmbca_hsspi_cs_info,
+       .set_mode = bcmbca_hsspi_set_mode,
+       .set_speed = bcmbca_hsspi_set_speed,
+       .xfer = bcmbca_hsspi_xfer,
+};
+
+static const struct udevice_id bcmbca_hsspi_ids[] = {
+       { .compatible = "brcm,bcmbca-hsspi-v1.1", },
+       { /* sentinel */ }
+};
+
+static int bcmbca_hsspi_child_pre_probe(struct udevice *dev)
+{
+       struct bcmbca_hsspi_priv *priv = dev_get_priv(dev->parent);
+       struct dm_spi_slave_plat *plat = dev_get_parent_plat(dev);
+       u32 val;
+
+       /* check cs */
+       if (plat->cs >= priv->num_cs) {
+               dev_err(dev, "no cs %u\n", plat->cs);
+               return -EINVAL;
+       }
+
+       /* cs polarity */
+       if (plat->mode & SPI_CS_HIGH)

drivers/spi/bcmbca_hsspi.c line 346

Quoted 10 lines
drivers/spi/bcmbca_hsspi.c new file +10 -0
+               priv->cs_pols |= BIT(plat->cs);
+       else
+               priv->cs_pols &= ~BIT(plat->cs);
+
+       /* set the polarity to spim cs register */
+       val = readl(priv->spim_ctrl);
+       val &= ~BIT(plat->cs + SPIM_CTRL_CS_OVERRIDE_VAL_SHIFT);
+       if (priv->cs_pols & BIT(plat->cs))
+               val |= BIT(plat->cs + SPIM_CTRL_CS_OVERRIDE_VAL_SHIFT);
+       writel(val, priv->spim_ctrl);

What is this code for cannot we handle this via set_mode or xfer?

Jagan.

author maintainer
#12 lore raw

Re: [PATCH v2 8/9] spi: bcmbca-hsspi: Add driver for newer HSSPI controller

Hi Jagan,

Quoted 13 lines · Jagan Teki
Quoted 11 lines · William Zhang

The newer BCMBCA SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI controller that add the capability to allow the driver to control chip select explicitly. Driver can control and keep cs low between the transfers natively. Hence the dummy cs workaround or prepend mode found in the bcm63xx-hsspi driver are no longer needed and this new driver is much cleaner.

Port from linux patch:

Quoted 9 lines
Quoted 6 lines

---

Changes in v2: None

  arch/arm/mach-bcmbca/Kconfig |  15 ++

Exclude this from spi driver patch. Driver has to be a separate patch.

Sure

Quoted 46 lines
Quoted 46 lines
  drivers/spi/Kconfig          |   9 +
  drivers/spi/Makefile         |   1 +
  drivers/spi/bcmbca_hsspi.c   | 414 +++++++++++++++++++++++++++++++++++
  4 files changed, 439 insertions(+)

create mode 100644 drivers/spi/bcmbca_hsspi.c

arch/arm/mach-bcmbca/Kconfig +4 -0
index 6441ed5929d2..60b36c4bb0f6 100644
@@ -27,6 +27,7 @@ config BCM4912
         select SYS_ARCH_TIMER
         select DM_SERIAL
         select PL01X_SERIAL
+       select BCMBCA_HSSPI
 
  config BCM63138
         bool "Support for Broadcom 63138 Family"
@@ -75,6 +76,7 @@ config BCM6756
         select CPU_V7A
         select DM_SERIAL
         select PL01X_SERIAL
+       select BCMBCA_HSSPI
 
  config BCM6813
         bool "Support for Broadcom 6813 Family"
@@ -82,6 +84,7 @@ config BCM6813
         select SYS_ARCH_TIMER
         select DM_SERIAL
         select PL01X_SERIAL
+       select BCMBCA_HSSPI
 
  config BCM6846
         bool "Support for Broadcom 6846 Family"
@@ -97,6 +100,7 @@ config BCM6855
         select CPU_V7A
         select DM_SERIAL
         select PL01X_SERIAL
+       select BCMBCA_HSSPI
         help
           Broadcom BCM6855 is a triple core Cortex A7 based xPON Gateway
           SoC. This SoC family includes BCM6855x, BCM68252 and BCM6753.
@@ -131,6 +135,17 @@ config BCM6878
         select PL01X_SERIAL
         select BCM63XX_HSSPI
 
Quoted 8 lines

arch/arm/mach-bcmbca/Kconfig config BCM6878 · line 143

Quoted 6 lines
arch/arm/mach-bcmbca/Kconfig +6 -0
+config HAVE_SPI_CS_CTRL
+       bool "SoC supports SPI chip select control"
+       default y if BCM4912
+       default y if BCM6756
+       default y if BCM6855
+       default y if BCM6813

Use ||

Will update

Quoted 63 lines
Quoted 63 lines
arch/arm/mach-bcmbca/Kconfig +5 -0
+       default n
+       help
+         Enable this option if SoC supports SPI chip select control explicitly
+         through software.
+
  source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
  source "arch/arm/mach-bcmbca/bcm4908/Kconfig"
  source "arch/arm/mach-bcmbca/bcm4912/Kconfig"
drivers/spi/Kconfig +9 -0
index 47a261f1e1b8..6b26915f9bb2 100644
@@ -107,6 +107,15 @@ config BCM63XX_HSSPI
           access the SPI NOR flash on platforms embedding this Broadcom
           SPI core.
 
+config BCMBCA_HSSPI
+       bool "BCMBCA HSSPI driver"
+       depends on ARCH_BCMBCA && HAVE_SPI_CS_CTRL
+       help
+         This enables support for the High Speed SPI controller present on
+         newer Broadcom BCMBCA SoCs. These SoCs include an updated SPI controller
+         that adds the capability to allow the driver to control chip select
+         explicitly.
+
  config BCM63XX_SPI
         bool "BCM6348 SPI driver"
         depends on ARCH_BMIPS
drivers/spi/Makefile +1 -0
index 95dba9ac4559..c27b3327c337 100644
@@ -25,6 +25,7 @@ obj-$(CONFIG_ATH79_SPI) += ath79_spi.o
  obj-$(CONFIG_ATMEL_QSPI) += atmel-quadspi.o
  obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o
  obj-$(CONFIG_BCM63XX_HSSPI) += bcm63xx_hsspi.o
+obj-$(CONFIG_BCMBCA_HSSPI) += bcmbca_hsspi.o
  obj-$(CONFIG_BCM63XX_SPI) += bcm63xx_spi.o
  obj-$(CONFIG_BCMSTB_SPI) += bcmstb_spi.o
  obj-$(CONFIG_CF_SPI) += cf_spi.o
drivers/spi/bcmbca_hsspi.c new file +16 -0
new file mode 100644
index 000000000000..fbe315a7d45d
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <[email protected]>
+ *
+ * Derived from linux/drivers/spi/spi-bcm63xx-hsspi.c:
+ *     Copyright (C) 2000-2010 Broadcom Corporation
+ *     Copyright (C) 2012-2013 Jonas Gorski <[email protected]>
+ *     Copyright (C) 2021 Broadcom Ltd
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <clk.h>
+#include <spi.h>
+#include <reset.h>
+#include <wait_bit.h>
Quoted 9 lines

drivers/spi/bcmbca_hsspi.c line 22

Quoted 6 lines
drivers/spi/bcmbca_hsspi.c new file +6 -0
+#include <dm.h>
+#include <dm/device_compat.h>
+
+#define HSSPI_PP                       0
+
+#define SPI_MAX_SYNC_CLOCK             30000000

What is this clock? spi-max-frequency ? if yes pick it from DT.

Not spi-max-frequency. This is the controller internal setting that determines if controller works in sync or async mode when clock is below or above this frequency.

Quoted 150 lines
Quoted 150 lines
drivers/spi/bcmbca_hsspi.c new file +150 -0
+
+/* SPI Control register */
+#define SPI_CTL_REG                    0x000
+#define SPI_CTL_CS_POL_SHIFT           0
+#define SPI_CTL_CS_POL_MASK            (0xff << SPI_CTL_CS_POL_SHIFT)
+#define SPI_CTL_CLK_GATE_SHIFT         16
+#define SPI_CTL_CLK_GATE_MASK          BIT(SPI_CTL_CLK_GATE_SHIFT)
+#define SPI_CTL_CLK_POL_SHIFT          17
+#define SPI_CTL_CLK_POL_MASK           BIT(SPI_CTL_CLK_POL_SHIFT)
+
+/* SPI Interrupts registers */
+#define SPI_IR_STAT_REG                        0x008
+#define SPI_IR_ST_MASK_REG             0x00c
+#define SPI_IR_MASK_REG                        0x010
+
+#define SPI_IR_CLEAR_ALL               0xff001f1f
+
+/* SPI Ping-Pong Command registers */
+#define SPI_CMD_REG                    (0x080 + (0x40 * (HSSPI_PP)) + 0x00)
+#define SPI_CMD_OP_SHIFT               0
+#define SPI_CMD_OP_START               BIT(SPI_CMD_OP_SHIFT)
+#define SPI_CMD_PFL_SHIFT              8
+#define SPI_CMD_PFL_MASK               (0x7 << SPI_CMD_PFL_SHIFT)
+#define SPI_CMD_SLAVE_SHIFT            12
+#define SPI_CMD_SLAVE_MASK             (0x7 << SPI_CMD_SLAVE_SHIFT)
+
+/* SPI Ping-Pong Status registers */
+#define SPI_STAT_REG                   (0x080 + (0x40 * (HSSPI_PP)) + 0x04)
+#define SPI_STAT_SRCBUSY_SHIFT         1
+#define SPI_STAT_SRCBUSY_MASK          BIT(SPI_STAT_SRCBUSY_SHIFT)
+
+/* SPI Profile Clock registers */
+#define SPI_PFL_CLK_REG(x)             (0x100 + (0x20 * (x)) + 0x00)
+#define SPI_PFL_CLK_FREQ_SHIFT         0
+#define SPI_PFL_CLK_FREQ_MASK          (0x3fff << SPI_PFL_CLK_FREQ_SHIFT)
+#define SPI_PFL_CLK_RSTLOOP_SHIFT      15
+#define SPI_PFL_CLK_RSTLOOP_MASK       BIT(SPI_PFL_CLK_RSTLOOP_SHIFT)
+
+/* SPI Profile Signal registers */
+#define SPI_PFL_SIG_REG(x)             (0x100 + (0x20 * (x)) + 0x04)
+#define SPI_PFL_SIG_LATCHRIS_SHIFT     12
+#define SPI_PFL_SIG_LATCHRIS_MASK      BIT(SPI_PFL_SIG_LATCHRIS_SHIFT)
+#define SPI_PFL_SIG_LAUNCHRIS_SHIFT    13
+#define SPI_PFL_SIG_LAUNCHRIS_MASK     BIT(SPI_PFL_SIG_LAUNCHRIS_SHIFT)
+#define SPI_PFL_SIG_ASYNCIN_SHIFT      16
+#define SPI_PFL_SIG_ASYNCIN_MASK       BIT(SPI_PFL_SIG_ASYNCIN_SHIFT)
+
+/* SPI Profile Mode registers */
+#define SPI_PFL_MODE_REG(x)            (0x100 + (0x20 * (x)) + 0x08)
+#define SPI_PFL_MODE_FILL_SHIFT                0
+#define SPI_PFL_MODE_FILL_MASK         (0xff << SPI_PFL_MODE_FILL_SHIFT)
+#define SPI_PFL_MODE_MDRDSZ_SHIFT      16
+#define SPI_PFL_MODE_MDRDSZ_MASK       BIT(SPI_PFL_MODE_MDRDSZ_SHIFT)
+#define SPI_PFL_MODE_MDWRSZ_SHIFT      18
+#define SPI_PFL_MODE_MDWRSZ_MASK       BIT(SPI_PFL_MODE_MDWRSZ_SHIFT)
+#define SPI_PFL_MODE_3WIRE_SHIFT       20
+#define SPI_PFL_MODE_3WIRE_MASK                BIT(SPI_PFL_MODE_3WIRE_SHIFT)
+
+/* SPI Ping-Pong FIFO registers */
+#define HSSPI_FIFO_SIZE                        0x200
+#define HSSPI_FIFO_BASE                        (0x200 + \
+                                        (HSSPI_FIFO_SIZE * HSSPI_PP))
+
+/* SPI Ping-Pong FIFO OP register */
+#define HSSPI_FIFO_OP_SIZE             0x2
+#define HSSPI_FIFO_OP_REG              (HSSPI_FIFO_BASE + 0x00)
+#define HSSPI_FIFO_OP_BYTES_SHIFT      0
+#define HSSPI_FIFO_OP_BYTES_MASK       (0x3ff << HSSPI_FIFO_OP_BYTES_SHIFT)
+#define HSSPI_FIFO_OP_MBIT_SHIFT       11
+#define HSSPI_FIFO_OP_MBIT_MASK                BIT(HSSPI_FIFO_OP_MBIT_SHIFT)
+#define HSSPI_FIFO_OP_CODE_SHIFT       13
+#define HSSPI_FIFO_OP_READ_WRITE       (1 << HSSPI_FIFO_OP_CODE_SHIFT)
+#define HSSPI_FIFO_OP_CODE_W           (2 << HSSPI_FIFO_OP_CODE_SHIFT)
+#define HSSPI_FIFO_OP_CODE_R           (3 << HSSPI_FIFO_OP_CODE_SHIFT)
+
+#define HSSPI_MAX_DATA_SIZE            (HSSPI_FIFO_SIZE - HSSPI_FIFO_OP_SIZE)
+
+#define SPIM_CTRL_CS_OVERRIDE_SEL_SHIFT                0
+#define SPIM_CTRL_CS_OVERRIDE_SEL_MASK         0xff
+#define SPIM_CTRL_CS_OVERRIDE_VAL_SHIFT                8
+#define SPIM_CTRL_CS_OVERRIDE_VAL_MASK         0xff
+
+struct bcmbca_hsspi_priv {
+       void __iomem *regs;
+       void __iomem *spim_ctrl;
+       u32 clk_rate;
+       u8 num_cs;
+       u8 cs_pols;
+       u32 speed;
+};
+
+static int bcmbca_hsspi_cs_info(struct udevice *bus, uint cs,
+                               struct spi_cs_info *info)
+{
+       struct bcmbca_hsspi_priv *priv = dev_get_priv(bus);
+
+       if (cs >= priv->num_cs) {
+               dev_err(bus, "no cs %u\n", cs);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int bcmbca_hsspi_set_mode(struct udevice *bus, uint mode)
+{
+       struct bcmbca_hsspi_priv *priv = dev_get_priv(bus);
+
+       /* clock polarity */
+       if (mode & SPI_CPOL)
+               setbits_32(priv->regs + SPI_CTL_REG, SPI_CTL_CLK_POL_MASK);
+       else
+               clrbits_32(priv->regs + SPI_CTL_REG, SPI_CTL_CLK_POL_MASK);
+
+       return 0;
+}
+
+static int bcmbca_hsspi_set_speed(struct udevice *bus, uint speed)
+{
+       struct bcmbca_hsspi_priv *priv = dev_get_priv(bus);
+
+       priv->speed = speed;
+
+       return 0;
+}
+
+static void bcmbca_hsspi_setup_clock(struct bcmbca_hsspi_priv *priv,
+                                    struct dm_spi_slave_plat *plat)
+{
+       u32 clr, set;
+
+       /* profile clock */
+       set = DIV_ROUND_UP(priv->clk_rate, priv->speed);
+       set = DIV_ROUND_UP(2048, set);
+       set &= SPI_PFL_CLK_FREQ_MASK;
+       set |= SPI_PFL_CLK_RSTLOOP_MASK;
+       writel(set, priv->regs + SPI_PFL_CLK_REG(plat->cs));
+
+       /* profile signal */
+       set = 0;
+       clr = SPI_PFL_SIG_LAUNCHRIS_MASK |
+             SPI_PFL_SIG_LATCHRIS_MASK |
+             SPI_PFL_SIG_ASYNCIN_MASK;
+
+       /* latch/launch config */
+       if (plat->mode & SPI_CPHA)
+               set |= SPI_PFL_SIG_LAUNCHRIS_MASK;
+       else
+               set |= SPI_PFL_SIG_LATCHRIS_MASK;
+
Quoted 9 lines

drivers/spi/bcmbca_hsspi.c line 177

Quoted 5 lines
drivers/spi/bcmbca_hsspi.c new file +5 -0
+       /* async clk */
+       if (priv->speed > SPI_MAX_SYNC_CLOCK)
+               set |= SPI_PFL_SIG_ASYNCIN_MASK;
+
+       clrsetbits_32(priv->regs + SPI_PFL_SIG_REG(plat->cs), clr, set);

I think this won't change every time cs changes, isn't it? if so mode code has to move set_mode and the speed code has to move set_speed.

The controller setting will change if different spi slave select has different settings. The set_mode and set_speed code in this driver do take care some of the settings but these settings need to be applied at the beginning of the transfer. This is same as the original bcm63xx driver.

Quoted 163 lines
Quoted 163 lines
drivers/spi/bcmbca_hsspi.c new file +163 -0
+
+       /* global control */
+       set = 0;
+       clr = 0;
+
+       if (priv->cs_pols & BIT(plat->cs))
+               set |= BIT(plat->cs);
+       else
+               clr |= BIT(plat->cs);
+
+       clrsetbits_32(priv->regs + SPI_CTL_REG, clr, set);
+}
+
+static void bcmbca_hsspi_activate_cs(struct bcmbca_hsspi_priv *priv,
+                                    struct dm_spi_slave_plat *plat)
+{
+       u32 val;
+
+       /* set the override bit */
+       val = readl(priv->spim_ctrl);
+       val |= BIT(plat->cs + SPIM_CTRL_CS_OVERRIDE_SEL_SHIFT);
+       writel(val, priv->spim_ctrl);
+}
+
+static void bcmbca_hsspi_deactivate_cs(struct bcmbca_hsspi_priv *priv,
+                                      struct dm_spi_slave_plat *plat)
+{
+       u32 val;
+
+       /* clear the cs override bit */
+       val = readl(priv->spim_ctrl);
+       val &= ~BIT(plat->cs + SPIM_CTRL_CS_OVERRIDE_SEL_SHIFT);
+       writel(val, priv->spim_ctrl);
+}
+
+static int bcmbca_hsspi_xfer(struct udevice *dev, unsigned int bitlen,
+                            const void *dout, void *din, unsigned long flags)
+{
+       struct bcmbca_hsspi_priv *priv = dev_get_priv(dev->parent);
+       struct dm_spi_slave_plat *plat = dev_get_parent_plat(dev);
+       size_t data_bytes = bitlen / 8;
+       size_t step_size = HSSPI_FIFO_SIZE;
+       u16 opcode = 0;
+       u32 val = SPI_PFL_MODE_FILL_MASK;
+       const u8 *tx = dout;
+       u8 *rx = din;
+       u32 cs_act = 0;
+
+       if (flags & SPI_XFER_BEGIN)
+               bcmbca_hsspi_setup_clock(priv, plat);
+
+       /* fifo operation */
+       if (tx && rx)
+               opcode = HSSPI_FIFO_OP_READ_WRITE;
+       else if (rx)
+               opcode = HSSPI_FIFO_OP_CODE_R;
+       else if (tx)
+               opcode = HSSPI_FIFO_OP_CODE_W;
+
+       if (opcode != HSSPI_FIFO_OP_CODE_R)
+               step_size -= HSSPI_FIFO_OP_SIZE;
+
+       /* dual mode */
+       if ((opcode == HSSPI_FIFO_OP_CODE_R && (plat->mode & SPI_RX_DUAL)) ||
+           (opcode == HSSPI_FIFO_OP_CODE_W && (plat->mode & SPI_TX_DUAL))) {
+               opcode |= HSSPI_FIFO_OP_MBIT_MASK;
+
+               /* profile mode */
+               if (plat->mode & SPI_RX_DUAL)
+                       val |= SPI_PFL_MODE_MDRDSZ_MASK;
+               if (plat->mode & SPI_TX_DUAL)
+                       val |= SPI_PFL_MODE_MDWRSZ_MASK;
+       }
+
+       if (plat->mode & SPI_3WIRE)
+               val |= SPI_PFL_MODE_3WIRE_MASK;
+       writel(val, priv->regs + SPI_PFL_MODE_REG(plat->cs));
+
+       /* transfer loop */
+       while (data_bytes > 0) {
+               size_t curr_step = min(step_size, data_bytes);
+               int ret;
+
+               /* copy tx data */
+               if (tx) {
+                       memcpy_toio(priv->regs + HSSPI_FIFO_BASE +
+                                   HSSPI_FIFO_OP_SIZE, tx, curr_step);
+                       tx += curr_step;
+               }
+
+               /* set fifo operation */
+               writew(cpu_to_be16(opcode | (curr_step & HSSPI_FIFO_OP_BYTES_MASK)),
+                      priv->regs + HSSPI_FIFO_OP_REG);
+
+               /* make sure we keep cs active until spi transfer is done */
+               if (!cs_act) {
+                       bcmbca_hsspi_activate_cs(priv, plat);
+                       cs_act = 1;
+               }
+
+               /* issue the transfer */
+               val = SPI_CMD_OP_START;
+               val |= (plat->cs << SPI_CMD_PFL_SHIFT) &
+                         SPI_CMD_PFL_MASK;
+               val |= (plat->cs << SPI_CMD_SLAVE_SHIFT) &
+                         SPI_CMD_SLAVE_MASK;
+               writel(val, priv->regs + SPI_CMD_REG);
+
+               /* wait for completion */
+               ret = wait_for_bit_32(priv->regs + SPI_STAT_REG,
+                                     SPI_STAT_SRCBUSY_MASK, false,
+                                     1000, false);
+               if (ret) {
+                       bcmbca_hsspi_deactivate_cs(priv, plat);
+                       dev_err(dev, "interrupt timeout\n");
+                       return ret;
+               }
+
+               data_bytes -= curr_step;
+               if ((flags & SPI_XFER_END) && !data_bytes)
+                       bcmbca_hsspi_deactivate_cs(priv, plat);
+
+               /* copy rx data */
+               if (rx) {
+                       memcpy_fromio(rx, priv->regs + HSSPI_FIFO_BASE,
+                                     curr_step);
+                       rx += curr_step;
+               }
+       }
+
+       return 0;
+}
+
+static const struct dm_spi_ops bcmbca_hsspi_ops = {
+       .cs_info = bcmbca_hsspi_cs_info,
+       .set_mode = bcmbca_hsspi_set_mode,
+       .set_speed = bcmbca_hsspi_set_speed,
+       .xfer = bcmbca_hsspi_xfer,
+};
+
+static const struct udevice_id bcmbca_hsspi_ids[] = {
+       { .compatible = "brcm,bcmbca-hsspi-v1.1", },
+       { /* sentinel */ }
+};
+
+static int bcmbca_hsspi_child_pre_probe(struct udevice *dev)
+{
+       struct bcmbca_hsspi_priv *priv = dev_get_priv(dev->parent);
+       struct dm_spi_slave_plat *plat = dev_get_parent_plat(dev);
+       u32 val;
+
+       /* check cs */
+       if (plat->cs >= priv->num_cs) {
+               dev_err(dev, "no cs %u\n", plat->cs);
+               return -EINVAL;
+       }
+
+       /* cs polarity */
+       if (plat->mode & SPI_CS_HIGH)
+               priv->cs_pols |= BIT(plat->cs);
+       else
+               priv->cs_pols &= ~BIT(plat->cs);
+
Quoted 9 lines

drivers/spi/bcmbca_hsspi.c line 346

Quoted 6 lines
drivers/spi/bcmbca_hsspi.c new file +6 -0
+       /* set the polarity to spim cs register */
+       val = readl(priv->spim_ctrl);
+       val &= ~BIT(plat->cs + SPIM_CTRL_CS_OVERRIDE_VAL_SHIFT);
+       if (priv->cs_pols & BIT(plat->cs))
+               val |= BIT(plat->cs + SPIM_CTRL_CS_OVERRIDE_VAL_SHIFT);
+       writel(val, priv->spim_ctrl);

What is this code for cannot we handle this via set_mode or xfer?

This is the new register introduced in this controller to allow the driver to override the cs signal high and low from the controller so driver can control it directly. In the old controller, driver has no control over cs at all. Here we preset the OVERRIDE_VAL based on the cs_pols setting so the actually bcmbca_hsspi_activate/deactivate_cs function just need to set the OVERRIDE_SEL bit. The bcmbca_hsspi_activate/deactivate_cs functions has to be called right befer and after the controller start/finish the transation so can not be set via set_mode and xfer

Quoted 2 lines

Jagan.

author maintainer
#13 lore raw

PATCH v2 9/9 MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers

In reply to William Zhang

Add entry for Broadcom Broadband SoC HS SPI drivers

---

Changes in v2:
- Add Álvaro Fernández Rojas as another maintainer

 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)
MAINTAINERS +9 -0
index 4c17c6cb9f1e..a1d490e66ed4 100644
@@ -823,6 +823,15 @@ F:	include/bootstd.h
 F:	net/eth_bootdevice.c
 F:	test/boot/
 
+BROADCOM Broadband SoC High Speed SPI Controller DRIVER
+M:	William Zhang <[email protected]>
+M:	Kursad Oney <[email protected]>
+M:	Álvaro Fernández Rojas <[email protected]>
+S:	Maintained
+F:	doc/device-tree-bindings/spi/brcm,bcm63xx-hsspi.yaml
+F:	drivers/spi/bcm63xx_hsspi.c
+F:	drivers/spi/bcmbca_hsspi.c
+
 BTRFS
 M:	Marek Behún <[email protected]>
 R:	Qu Wenruo <[email protected]>
Signature · 1 line
2.37.3
author maintainer
#14 lore raw
In reply to William Zhang

Hi Jagan and Tom,

Any chance to get this patch series into the u-boot? I haven't heard any feedback and comments but they are largely based on patch series for linux that was accepted in kernel stable release 6.3 and verified on Broadcom reference boards.

Thanks,
William

Quoted 65 lines · William Zhang

This patch series is the u-boot port from the recently accepted kernel Broadcom HSSPI driver patch series here [1]. It includes the accumulative updates and fixes for the driver from Broadcom. It also added a new driver for the updated SPI controller found in the new BCMBCA SoC. The device tree document is converted to yaml format and updated accordingly.

[1]: https://lore.kernel.org/all/[email protected]/

Changes in v2:
- Add Álvaro Fernández Rojas as another maintainer

William Zhang (9):
dt-bindings: spi: Add bcm63xx-hsspi controller support
ARM: dts: broadcom: bcmbca: Add spi controller node
arm64: dts: broadcom: bcmbca: Add spi controller node
spi: bcm63xx-hsspi: Enable SPI drivers by default
spi: bcm63xx-hsspi: Add new compatible string support
spi: bcm63xx-hsspi: Fix multi-bit mode setting
spi: bcm63xx-hsspi: Add prepend mode support
spi: bcmbca-hsspi: Add driver for newer HSSPI controller
MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers

  MAINTAINERS                                   |   9 +
  arch/arm/Kconfig                              |   2 +
  arch/arm/dts/bcm47622.dtsi                    |  18 +
  arch/arm/dts/bcm4908.dtsi                     |  17 +
  arch/arm/dts/bcm4912.dtsi                     |  20 +
  arch/arm/dts/bcm63138.dtsi                    |  18 +
  arch/arm/dts/bcm63146.dtsi                    |  19 +
  arch/arm/dts/bcm63148.dtsi                    |  18 +
  arch/arm/dts/bcm63158.dtsi                    |  15 +-
  arch/arm/dts/bcm63178.dtsi                    |  19 +
  arch/arm/dts/bcm6756.dtsi                     |  19 +
  arch/arm/dts/bcm6813.dtsi                     |  20 +
  arch/arm/dts/bcm6846.dtsi                     |  18 +
  arch/arm/dts/bcm6855.dtsi                     |  27 +-
  arch/arm/dts/bcm6856.dtsi                     |  23 +-
  arch/arm/dts/bcm6858.dtsi                     |  23 +-
  arch/arm/dts/bcm6878.dtsi                     |  19 +
  arch/arm/dts/bcm947622.dts                    |   4 +
  arch/arm/dts/bcm94908.dts                     |   4 +
  arch/arm/dts/bcm94912.dts                     |   4 +
  arch/arm/dts/bcm963138.dts                    |   4 +
  arch/arm/dts/bcm963146.dts                    |   4 +
  arch/arm/dts/bcm963148.dts                    |   4 +
  arch/arm/dts/bcm963158.dts                    |   4 +
  arch/arm/dts/bcm963178.dts                    |   4 +
  arch/arm/dts/bcm96756.dts                     |   4 +
  arch/arm/dts/bcm96813.dts                     |   4 +
  arch/arm/dts/bcm96846.dts                     |   4 +
  arch/arm/dts/bcm96855.dts                     |   4 +
  arch/arm/dts/bcm96856.dts                     |   4 +
  arch/arm/dts/bcm96858.dts                     |   4 +
  arch/arm/dts/bcm96878.dts                     |   4 +
  arch/arm/mach-bcmbca/Kconfig                  |  26 ++
  .../spi/brcm,bcm63xx-hsspi.yaml               | 134 ++++++
  drivers/spi/Kconfig                           |  13 +-
  drivers/spi/Makefile                          |   1 +
  drivers/spi/bcm63xx_hsspi.c                   | 277 +++++++++++-
  drivers/spi/bcmbca_hsspi.c                    | 414 ++++++++++++++++++
  38 files changed, 1160 insertions(+), 69 deletions(-)

create mode 100644 doc/device-tree-bindings/spi/brcm,bcm63xx-hsspi.yaml create mode 100644 drivers/spi/bcmbca_hsspi.c

#15 lore raw
In reply to William Zhang
Quoted 13 lines · William Zhang

This patch series is the u-boot port from the recently accepted kernel Broadcom HSSPI driver patch series here [1]. It includes the accumulative updates and fixes for the driver from Broadcom. It also added a new driver for the updated SPI controller found in the new BCMBCA SoC. The device tree document is converted to yaml format and updated accordingly.

[1]: https://lore.kernel.org/all/[email protected]/

Changes in v2:
- Add Álvaro Fernández Rojas as another maintainer

Quoted 7 lines

William Zhang (9):
dt-bindings: spi: Add bcm63xx-hsspi controller support
ARM: dts: broadcom: bcmbca: Add spi controller node
arm64: dts: broadcom: bcmbca: Add spi controller node
spi: bcm63xx-hsspi: Enable SPI drivers by default
spi: bcm63xx-hsspi: Add new compatible string support
spi: bcm63xx-hsspi: Fix multi-bit mode setting

This will fix for the upcoming release.

Quoted 3 lines

spi: bcm63xx-hsspi: Add prepend mode support
spi: bcmbca-hsspi: Add driver for newer HSSPI controller
MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers

Patches send the patches related to SPI as separate series.

Also please note that for arch patches, I have moved to tom since I'm unable to find the proper delate for bcmbca.

Thanks,
Jagan.

author maintainer
#16 lore raw

Hi Jagan,

Quoted 25 lines · Jagan Teki
Quoted 13 lines · William Zhang

This patch series is the u-boot port from the recently accepted kernel Broadcom HSSPI driver patch series here [1]. It includes the accumulative updates and fixes for the driver from Broadcom. It also added a new driver for the updated SPI controller found in the new BCMBCA SoC. The device tree document is converted to yaml format and updated accordingly.

[1]: https://lore.kernel.org/all/[email protected]/

Changes in v2:
- Add Álvaro Fernández Rojas as another maintainer

Quoted 7 lines

William Zhang (9):
dt-bindings: spi: Add bcm63xx-hsspi controller support
ARM: dts: broadcom: bcmbca: Add spi controller node
arm64: dts: broadcom: bcmbca: Add spi controller node
spi: bcm63xx-hsspi: Enable SPI drivers by default
spi: bcm63xx-hsspi: Add new compatible string support
spi: bcm63xx-hsspi: Fix multi-bit mode setting

This will fix for the upcoming release.

Quoted 9 lines
Quoted 3 lines

spi: bcm63xx-hsspi: Add prepend mode support
spi: bcmbca-hsspi: Add driver for newer HSSPI controller
MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers

Patches send the patches related to SPI as separate series.

Also please note that for arch patches, I have moved to tom since I'm unable to find the proper delate for bcmbca.

Thanks Jagan for the reviews. I will send out two patches series with updates based on the reviews: one for SPI driver changes and another for arch/dts/doc changes

Quoted 3 lines

Thanks,
Jagan.

author maintainer
#17 lore raw

Hi Jagan,

Quoted 33 lines · William Zhang

Hi Jagan,

Quoted 30 lines · Jagan Teki
Quoted 14 lines · William Zhang

This patch series is the u-boot port from the recently accepted kernel Broadcom HSSPI driver patch series here [1]. It includes the accumulative updates and fixes for the driver from Broadcom. It also added a new driver for the updated SPI controller found in the new BCMBCA SoC. The device tree document is converted to yaml format and updated accordingly.

[1]: https://lore.kernel.org/all/[email protected]/

Changes in v2:
- Add Álvaro Fernández Rojas as another maintainer

Quoted 7 lines

William Zhang (9):
   dt-bindings: spi: Add bcm63xx-hsspi controller support
   ARM: dts: broadcom: bcmbca: Add spi controller node
   arm64: dts: broadcom: bcmbca: Add spi controller node
   spi: bcm63xx-hsspi: Enable SPI drivers by default
   spi: bcm63xx-hsspi: Add new compatible string support
   spi: bcm63xx-hsspi: Fix multi-bit mode setting

This will fix for the upcoming release.

Quoted 3 lines

   spi: bcm63xx-hsspi: Add prepend mode support
   spi: bcmbca-hsspi: Add driver for newer HSSPI controller
   MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers

Quoted 7 lines
Quoted 5 lines

Patches send the patches related to SPI as separate series.

Also please note that for arch patches, I have moved to tom since I'm unable to find the proper delate for bcmbca.

Thanks Jagan for the reviews. I will send out two patches series with updates based on the reviews: one for SPI driver changes and another for arch/dts/doc changes

There is one issue in separating the patches to SPI only changes and arch/dts changes. The new BCMBCA HSSPI driver depends on a new config HAVE_SPI_CS_CTRL that is added to arch/arm/mach-bcmbca/Kconfig in the arch change patch series. So you will get build error on generating the .config and have to pick that change to avoid that issue. Will that be okay?

Quoted 3 lines
Quoted 3 lines

Thanks,
Jagan.

#18 lore raw
Quoted 45 lines · William Zhang

Hi Jagan,

Quoted 33 lines · William Zhang

Hi Jagan,

Quoted 30 lines · Jagan Teki
Quoted 14 lines · William Zhang

This patch series is the u-boot port from the recently accepted kernel Broadcom HSSPI driver patch series here [1]. It includes the accumulative updates and fixes for the driver from Broadcom. It also added a new driver for the updated SPI controller found in the new BCMBCA SoC. The device tree document is converted to yaml format and updated accordingly.

[1]: https://lore.kernel.org/all/[email protected]/

Changes in v2:
- Add Álvaro Fernández Rojas as another maintainer

Quoted 7 lines

William Zhang (9):
   dt-bindings: spi: Add bcm63xx-hsspi controller support
   ARM: dts: broadcom: bcmbca: Add spi controller node
   arm64: dts: broadcom: bcmbca: Add spi controller node
   spi: bcm63xx-hsspi: Enable SPI drivers by default
   spi: bcm63xx-hsspi: Add new compatible string support
   spi: bcm63xx-hsspi: Fix multi-bit mode setting

This will fix for the upcoming release.

Quoted 3 lines

   spi: bcm63xx-hsspi: Add prepend mode support
   spi: bcmbca-hsspi: Add driver for newer HSSPI controller
   MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers

Quoted 9 lines
Quoted 5 lines

Patches send the patches related to SPI as separate series.

Also please note that for arch patches, I have moved to tom since I'm unable to find the proper delate for bcmbca.

Thanks Jagan for the reviews. I will send out two patches series with updates based on the reviews: one for SPI driver changes and another for arch/dts/doc changes

Quoted 6 lines

There is one issue in separating the patches to SPI only changes and arch/dts changes. The new BCMBCA HSSPI driver depends on a new config HAVE_SPI_CS_CTRL that is added to arch/arm/mach-bcmbca/Kconfig in the arch change patch series. So you will get build error on generating the .config and have to pick that change to avoid that issue. Will that be okay?

Frankly I'd rather the whole series just come in via Jagan's tree, or if he's uncomfortable with that, I'll take the whole series if he's fine with the SPI side. We don't need to worry about which sub-tree is used so long as maintainers are happy with the contents, in U-Boot, imho.

Signature · 1 line
Tom
author maintainer
#19 lore raw

Hi Tom,

Quoted 53 lines · Tom Rini
Quoted 45 lines · William Zhang

Hi Jagan,

Quoted 33 lines · William Zhang

Hi Jagan,

Quoted 30 lines · Jagan Teki
Quoted 14 lines · William Zhang

This patch series is the u-boot port from the recently accepted kernel Broadcom HSSPI driver patch series here [1]. It includes the accumulative updates and fixes for the driver from Broadcom. It also added a new driver for the updated SPI controller found in the new BCMBCA SoC. The device tree document is converted to yaml format and updated accordingly.

[1]: https://lore.kernel.org/all/[email protected]/

Changes in v2:
- Add Álvaro Fernández Rojas as another maintainer

Quoted 7 lines

William Zhang (9):
   dt-bindings: spi: Add bcm63xx-hsspi controller support
   ARM: dts: broadcom: bcmbca: Add spi controller node
   arm64: dts: broadcom: bcmbca: Add spi controller node
   spi: bcm63xx-hsspi: Enable SPI drivers by default
   spi: bcm63xx-hsspi: Add new compatible string support
   spi: bcm63xx-hsspi: Fix multi-bit mode setting

This will fix for the upcoming release.

Quoted 3 lines

   spi: bcm63xx-hsspi: Add prepend mode support
   spi: bcmbca-hsspi: Add driver for newer HSSPI controller
   MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers

Quoted 9 lines
Quoted 5 lines

Patches send the patches related to SPI as separate series.

Also please note that for arch patches, I have moved to tom since I'm unable to find the proper delate for bcmbca.

Thanks Jagan for the reviews. I will send out two patches series with updates based on the reviews: one for SPI driver changes and another for arch/dts/doc changes

Quoted 6 lines

There is one issue in separating the patches to SPI only changes and arch/dts changes. The new BCMBCA HSSPI driver depends on a new config HAVE_SPI_CS_CTRL that is added to arch/arm/mach-bcmbca/Kconfig in the arch change patch series. So you will get build error on generating the .config and have to pick that change to avoid that issue. Will that be okay?

Quoted 5 lines

Frankly I'd rather the whole series just come in via Jagan's tree, or if he's uncomfortable with that, I'll take the whole series if he's fine with the SPI side. We don't need to worry about which sub-tree is used so long as maintainers are happy with the contents, in U-Boot, imho.

Sounds good and thanks Tom! Let me send out the v3 of the whole series some time late today.