LTP: tirpc_rpcb_rmtcall is failing
Subsystems (2)
Hi Steve,
tirpc_rpcb_rmtcall is failing. I was able to reproduce it on
* openSUSE Tumbleweed with libtirpc 1.3.3
* Debian stable 11 (bullseye) with libtirpc 1.3.1-1
OTOH SLE 15-SP4 with libtirpc 1.2.6 is working.
PATH="/opt/ltp/testcases/bin:$PATH" rpc_test.sh -s tirpc_svc_4 -c tirpc_rpcb_rmtcall rpc_test 1 TINFO: initialize 'lhost' 'ltp_ns_veth2' interfacerpc_test 1 TINFO: add local addr 10.0.0.2/24rpc_test 1 TINFO: add local addr fd00:1:1:1::2/64rpc_test 1 TINFO: initialize 'rhost' 'ltp_ns_veth1' interfacerpc_test 1 TINFO: add remote addr 10.0.0.1/24rpc_test 1 TINFO: add remote addr fd00:1:1:1::1/64rpc_test 1 TINFO: Network config (local -- remote):rpc_test 1 TINFO: ltp_ns_veth2 -- ltp_ns_veth1rpc_test 1 TINFO: 10.0.0.2/24 -- 10.0.0.1/24rpc_test 1 TINFO: fd00:1:1:1::2/64 -- fd00:1:1:1::1/64rpc_test 1 TINFO: timeout per run is 0h 5m 0srpc_test 1 TINFO: check registered RPC with rpcinforpc_test 1 TINFO: registered RPC:
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100005 1 udp 20048 mountd
100005 1 tcp 20048 mountd
100005 2 udp 20048 mountd
100005 2 tcp 20048 mountd
100005 3 udp 20048 mountd
100005 3 tcp 20048 mountd
100024 1 udp 37966 status
100024 1 tcp 43643 status
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100227 3 tcp 2049 nfs_acl
100021 1 udp 59603 nlockmgr
100021 3 udp 59603 nlockmgr
100021 4 udp 59603 nlockmgr
100021 1 tcp 39145 nlockmgr
100021 3 tcp 39145 nlockmgr
100021 4 tcp 39145 nlockmgrrpc_test 1 TINFO: using libtirpc: yesrpc_test 1 TFAIL: tirpc_rpcb_rmtcall 10.0.0.2 536875000 failed unexpectedly 1
The problem is in tirpc_rpcb_rmtcall.c [1], which calls rpcb_rmtcall(), which returns 1 (I suppose RPC_CANTENCODEARGS - can't encode arguments - enum clnt_stat from tirpc/rpc/clnt_stat.h):
cs = rpcb_rmtcall(nconf, argc[1], progNum, VERSNUM, PROCNUM,
(xdrproc_t) xdr_int, (char *)&var_snd,
(xdrproc_t) xdr_int, (char *)&var_rec, tv, &svcaddr);
test_status = (cs == RPC_SUCCESS) ? 0 : 1;
//This last printf gives the result status to the tests suite
//normally should be 0: test has passed or 1: test has failed
printf("%d\n", test_status);
return test_status;Any idea what could be wrong with these very old tests?
Kind regards,
Petr
Hello Petr,
Quoted 66 lines · Petr Vorel
Hi Steve,
tirpc_rpcb_rmtcallis failing. I was able to reproduce it on
* openSUSE Tumbleweed with libtirpc 1.3.3
* Debian stable 11 (bullseye) with libtirpc 1.3.1-1OTOH SLE 15-SP4 with libtirpc 1.2.6 is working.
PATH="/opt/ltp/testcases/bin:$PATH"
rpc_test.sh-stirpc_svc_4-ctirpc_rpcb_rmtcallrpc_test1 TINFO: initialize 'lhost' 'ltp_ns_veth2' interfacerpc_test1 TINFO: add local addr 10.0.0.2/24rpc_test1 TINFO: add local addr fd00:1:1:1::2/64rpc_test1 TINFO: initialize 'rhost' 'ltp_ns_veth1' interfacerpc_test1 TINFO: add remote addr 10.0.0.1/24rpc_test1 TINFO: add remote addr fd00:1:1:1::1/64rpc_test1 TINFO: Network config (local -- remote):rpc_test1 TINFO:ltp_ns_veth2--ltp_ns_veth1rpc_test1 TINFO: 10.0.0.2/24 -- 10.0.0.1/24rpc_test1 TINFO: fd00:1:1:1::2/64 -- fd00:1:1:1::1/64rpc_test1 TINFO: timeout per run is 0h 5m 0srpc_test1 TINFO: check registered RPC with rpcinforpc_test1 TINFO: registered RPC:program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100005 1 udp 20048 mountd 100005 1 tcp 20048 mountd 100005 2 udp 20048 mountd 100005 2 tcp 20048 mountd 100005 3 udp 20048 mountd 100005 3 tcp 20048 mountd 100024 1 udp 37966 status 100024 1 tcp 43643 status 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100227 3 tcp 2049 nfs_acl 100021 1 udp 59603 nlockmgr 100021 3 udp 59603 nlockmgr 100021 4 udp 59603 nlockmgr 100021 1 tcp 39145 nlockmgr 100021 3 tcp 39145 nlockmgr 100021 4 tcp 39145 nlockmgr
rpc_test1 TINFO: using libtirpc: yesrpc_test1 TFAIL:tirpc_rpcb_rmtcall10.0.0.2 536875000 failed unexpectedly 1The problem is in
tirpc_rpcb_rmtcall.c[1], which callsrpcb_rmtcall(), which returns 1 (I supposeRPC_CANTENCODEARGS- can't encode arguments - enumclnt_statfromtirpc/rpc/clnt_stat.h):cs = rpcb_rmtcall(nconf, argc[1], progNum, VERSNUM, PROCNUM, (xdrproc_t) xdr_int, (char *)&var_snd, (xdrproc_t) xdr_int, (char *)&var_rec, tv, &svcaddr); test_status = (cs == RPC_SUCCESS) ? 0 : 1; //This last printf gives the result status to the tests suite //normally should be 0: test has passed or 1: test has failed printf("%d\n", test_status); return test_status;
Quoted 1 line
Any idea what could be wrong with these very old tests?
No... No idea... but I'm unable to reproduce it. It appears you are using different repo that the one I found on github [1]. But...
Looking code, RPC_CANTENCODEARGS is returned when there is an xdr problem which might means a
memory problem??
With that said... commits 21718bbb^..fa153d63 did make a lot of changes in the locking and cache management.
steved.
[1] https://github.com/linux-test-project/ltp
Quoted 6 lines
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Hi Steve,
Quoted 67 lines
Hello Petr,
Quoted 63 lines · Petr Vorel
Hi Steve,
tirpc_rpcb_rmtcallis failing. I was able to reproduce it on
* openSUSE Tumbleweed with libtirpc 1.3.3
* Debian stable 11 (bullseye) with libtirpc 1.3.1-1OTOH SLE 15-SP4 with libtirpc 1.2.6 is working.
PATH="/opt/ltp/testcases/bin:$PATH"
rpc_test.sh-stirpc_svc_4-ctirpc_rpcb_rmtcallrpc_test1 TINFO: initialize 'lhost' 'ltp_ns_veth2' interfacerpc_test1 TINFO: add local addr 10.0.0.2/24rpc_test1 TINFO: add local addr fd00:1:1:1::2/64rpc_test1 TINFO: initialize 'rhost' 'ltp_ns_veth1' interfacerpc_test1 TINFO: add remote addr 10.0.0.1/24rpc_test1 TINFO: add remote addr fd00:1:1:1::1/64rpc_test1 TINFO: Network config (local -- remote):rpc_test1 TINFO:ltp_ns_veth2--ltp_ns_veth1rpc_test1 TINFO: 10.0.0.2/24 -- 10.0.0.1/24rpc_test1 TINFO: fd00:1:1:1::2/64 -- fd00:1:1:1::1/64rpc_test1 TINFO: timeout per run is 0h 5m 0srpc_test1 TINFO: check registered RPC with rpcinforpc_test1 TINFO: registered RPC:program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100005 1 udp 20048 mountd 100005 1 tcp 20048 mountd 100005 2 udp 20048 mountd 100005 2 tcp 20048 mountd 100005 3 udp 20048 mountd 100005 3 tcp 20048 mountd 100024 1 udp 37966 status 100024 1 tcp 43643 status 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100227 3 tcp 2049 nfs_acl 100021 1 udp 59603 nlockmgr 100021 3 udp 59603 nlockmgr 100021 4 udp 59603 nlockmgr 100021 1 tcp 39145 nlockmgr 100021 3 tcp 39145 nlockmgr 100021 4 tcp 39145 nlockmgr
rpc_test1 TINFO: using libtirpc: yesrpc_test1 TFAIL:tirpc_rpcb_rmtcall10.0.0.2 536875000 failed unexpectedly 1The problem is in
tirpc_rpcb_rmtcall.c[1], which callsrpcb_rmtcall(), which returns 1 (I supposeRPC_CANTENCODEARGS- can't encode arguments - enumclnt_statfromtirpc/rpc/clnt_stat.h):cs = rpcb_rmtcall(nconf, argc[1], progNum, VERSNUM, PROCNUM, (xdrproc_t) xdr_int, (char *)&var_snd, (xdrproc_t) xdr_int, (char *)&var_rec, tv, &svcaddr); test_status = (cs == RPC_SUCCESS) ? 0 : 1; //This last printf gives the result status to the tests suite //normally should be 0: test has passed or 1: test has failed printf("%d\n", test_status);
Quoted 6 lines
Quoted 3 lines
return test_status;Any idea what could be wrong with these very old tests?
No... No idea... but I'm unable to reproduce it. It appears you are using different repo that the one I found on github [1]. But...
Thanks a lot for looking into the issue.
BTW on which Fedora/RHEL/CentOS version did you test?
No, I'm also using the official LTP repository on github [1].
And I compile on recent glibc (> 2.32, which removed SUN-RPC) and with libtirpc:
./configure
...
libtirpc: yes
glibc SUN-RPC: no
Quoted 5 lines
Looking code,
RPC_CANTENCODEARGSis returned when
there is an xdr problem which might means a
memory problem??With that said... commits 21718bbb^..fa153d63 did
That was released on 1.3.3, but I'm able to reproduce it on Debian stable 11 (bullseye) with libtirpc 1.3.1-1.
Kind regards,
Petr
Quoted 11 lines
make a lot of changes in the locking and cache
management.steved.
Hello,
Quoted 71 lines · Petr Vorel
Hi Steve,
Quoted 68 lines
Hello Petr,
Quoted 65 lines · Petr Vorel
Hi Steve,
tirpc_rpcb_rmtcallis failing. I was able to reproduce it on
* openSUSE Tumbleweed with libtirpc 1.3.3
* Debian stable 11 (bullseye) with libtirpc 1.3.1-1OTOH SLE 15-SP4 with libtirpc 1.2.6 is working.
PATH="/opt/ltp/testcases/bin:$PATH"
rpc_test.sh-stirpc_svc_4-ctirpc_rpcb_rmtcallrpc_test1 TINFO: initialize 'lhost' 'ltp_ns_veth2' interfacerpc_test1 TINFO: add local addr 10.0.0.2/24rpc_test1 TINFO: add local addr fd00:1:1:1::2/64rpc_test1 TINFO: initialize 'rhost' 'ltp_ns_veth1' interfacerpc_test1 TINFO: add remote addr 10.0.0.1/24rpc_test1 TINFO: add remote addr fd00:1:1:1::1/64rpc_test1 TINFO: Network config (local -- remote):rpc_test1 TINFO:ltp_ns_veth2--ltp_ns_veth1rpc_test1 TINFO: 10.0.0.2/24 -- 10.0.0.1/24rpc_test1 TINFO: fd00:1:1:1::2/64 -- fd00:1:1:1::1/64rpc_test1 TINFO: timeout per run is 0h 5m 0srpc_test1 TINFO: check registered RPC with rpcinforpc_test1 TINFO: registered RPC:program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100005 1 udp 20048 mountd 100005 1 tcp 20048 mountd 100005 2 udp 20048 mountd 100005 2 tcp 20048 mountd 100005 3 udp 20048 mountd 100005 3 tcp 20048 mountd 100024 1 udp 37966 status 100024 1 tcp 43643 status 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100227 3 tcp 2049 nfs_acl 100021 1 udp 59603 nlockmgr 100021 3 udp 59603 nlockmgr 100021 4 udp 59603 nlockmgr 100021 1 tcp 39145 nlockmgr 100021 3 tcp 39145 nlockmgr 100021 4 tcp 39145 nlockmgr
rpc_test1 TINFO: using libtirpc: yesrpc_test1 TFAIL:tirpc_rpcb_rmtcall10.0.0.2 536875000 failed unexpectedly 1The problem is in
tirpc_rpcb_rmtcall.c[1], which callsrpcb_rmtcall(), which returns 1 (I supposeRPC_CANTENCODEARGS- can't encode arguments - enumclnt_statfromtirpc/rpc/clnt_stat.h):cs = rpcb_rmtcall(nconf, argc[1], progNum, VERSNUM, PROCNUM, (xdrproc_t) xdr_int, (char *)&var_snd, (xdrproc_t) xdr_int, (char *)&var_rec, tv, &svcaddr); test_status = (cs == RPC_SUCCESS) ? 0 : 1; //This last printf gives the result status to the tests suite //normally should be 0: test has passed or 1: test has failed printf("%d\n", test_status); return test_status;
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Any idea what could be wrong with these very old tests?
No... No idea... but I'm unable to reproduce it. It appears you are using different repo that the one I found on github [1]. But...
Thanks a lot for looking into the issue.
BTW on which Fedora/RHEL/CentOS version did you test?
Fedora 38... but I will keep trying...
Quoted 9 lines
No, I'm also using the official LTP repository on github [1].
And I compile on recent glibc (> 2.32, which removed SUN-RPC) and with libtirpc:./configure
...
libtirpc: yes
glibc SUN-RPC: no
Quoted 7 lines
Quoted 5 lines
Looking code,
RPC_CANTENCODEARGSis returned when
there is an xdr problem which might means a
memory problem??With that said... commits 21718bbb^..fa153d63 did
That was released on 1.3.3, but I'm able to reproduce it on Debian stable 11 (bullseye) with libtirpc 1.3.1-1.
Good to know... thanks!
steved.
Quoted 17 lines
Kind regards,
PetrQuoted 11 lines
make a lot of changes in the locking and cache
management.steved.
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp