Skip to contentSkip to conversation

Add negative test for extended display

PATCH In review Mohammed Thasleem 4 participants 8 messages May 7, 2023 – Jun 5, 2023 Library code

lore
Share & tools
lore
#0 lore raw

v3 cover Add negative test for extended display

Added negative test to validte ENOSPC when two 2k-4k or 4k-4k moniters connected through MST.
This test added to provide bandwidth issue in MST config.

Mohammed Thasleem (2):
tests/kms_display_modes: Add negative test for extended display lib/igt_kms: Check for other modes to fit on bw when ENOSPC failure

 lib/igt_kms.c             |   2 +
 tests/kms_display_modes.c | 165 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 167 insertions(+)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v3 1/2 tests/kms_display_modes: Add negative test for extended display

Added negative test to validte ENOSPC when two 2k-4k or 4k-4k moniters connected through MST.
This test added to provide bandwidth issue in MST config.

Example:
When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth. So, iterate through connected outputs & modes and find a invalid combination.

v2: Rebased on tip.
v3: -Code cleanup and updated description.
-Free path_blob before call return. (Kamil)
v4: Updated code formatting and function description. (Jeevan)
v5: Updated commit description and minor changes.
v6: Added bigjoiner check and updated comments. (Bhanu)

---
 tests/kms_display_modes.c | 165 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 165 insertions(+)
tests/kms_display_modes.c +165 -0
index d69c7b931..892f39b20 100644
@@ -26,14 +26,111 @@
 
 #include "igt.h"
 
+#define HDISPLAY_4K	3840
+#define VDISPLAY_4K	2160
+
 IGT_TEST_DESCRIPTION("Test Display Modes");
 
 typedef struct {
 	int drm_fd;
 	igt_display_t display;
+	drmModeModeInfo mode_mst[2];
+	igt_output_t *mst_output[2];
 	int n_pipes;
 } data_t;
 
+/* Get higher mode supported by panel. */
+static drmModeModeInfo *get_highres_mode(igt_output_t *output)
+{
+	drmModeConnector *connector = output->config.connector;
+	drmModeModeInfo *highest_mode = NULL;
+
+	igt_sort_connector_modes(connector, sort_drm_modes_by_res_dsc);
+	highest_mode = &connector->modes[0];
+
+	return highest_mode;
+}
+
+/* Get the 4k or less then 4k mode of connected panel. */
+static drmModeModeInfo *get_mode(igt_output_t *output)
+{
+	int j;
+	drmModeModeInfo *required_mode = NULL;
+	drmModeConnector *connector = output->config.connector;
+
+	required_mode = igt_output_get_mode(output);
+	if (required_mode->vdisplay <= VDISPLAY_4K &&
+	    required_mode->hdisplay <= HDISPLAY_4K) {
+		return required_mode;
+	}
+
+	/* If default mode not 4k or less than 4k mode, then sort modes and check for it. */
+	igt_sort_connector_modes(connector, sort_drm_modes_by_res_dsc);
+	for (j = 0; j < connector->count_modes; j++) {
+		if (connector->modes[j].vdisplay <= VDISPLAY_4K &&
+		    connector->modes[j].hdisplay <= HDISPLAY_4K) {
+			required_mode = &connector->modes[j];
+			break;
+		}
+	}
+
+	return required_mode;
+}
+
+static int parse_path_blob(char *blob_data)
+{
+	int connector_id;
+	char *encoder;
+
+	encoder = strtok(blob_data, ":");
+	igt_assert_f(!strcmp(encoder, "mst"), "PATH connector property expected to have 'mst'\n");
+
+	connector_id = atoi(strtok(NULL, "-"));
+
+	return connector_id;
+}
+
+static bool output_is_dp_mst(data_t *data, igt_output_t *output, int i)
+{
+	drmModePropertyBlobPtr path_blob = NULL;
+	uint64_t path_blob_id;
+	drmModeConnector *connector = output->config.connector;
+	struct kmstest_connector_config config;
+	const char *encoder;
+	int connector_id;
+	static int prev_connector_id;
+
+	kmstest_get_connector_config(data->drm_fd, output->config.connector->connector_id,
+				     -1, &config);
+	encoder = kmstest_encoder_type_str(config.encoder->encoder_type);
+
+	if (strcmp(encoder, "DP MST"))
+		return false;
+
+	igt_assert(kmstest_get_property(data->drm_fd, connector->connector_id,
+		   DRM_MODE_OBJECT_CONNECTOR, "PATH", NULL,
+		   &path_blob_id, NULL));
+
+	igt_assert(path_blob = drmModeGetPropertyBlob(data->drm_fd, path_blob_id));
+
+	connector_id = parse_path_blob((char *) path_blob->data);
+
+	drmModeFreePropertyBlob(path_blob);
+
+	/*
+	 * Discarding outputs of other DP MST topology.
+	 * Testing only on outputs on the topology we got previously
+	 */
+	if (i == 0) {
+		prev_connector_id = connector_id;
+	} else {
+		if (connector_id != prev_connector_id)
+			return false;
+	}
+
+	return true;
+}
+
 static void run_extendedmode_basic(data_t *data,
 				   enum pipe pipe1, igt_output_t *output1,
 				   enum pipe pipe2, igt_output_t *output2)
@@ -173,8 +270,47 @@ static void run_extendedmode_test(data_t *data) {
 	}
 }
 
+static void run_extendedmode_negative(data_t *data, int pipe1, int pipe2)
+{
+	struct igt_fb fbs[2];
+	igt_display_t *display = &data->display;
+	igt_plane_t *plane[2];
+	int ret;
+
+	igt_display_reset(display);
+
+	igt_output_set_pipe(data->mst_output[0], pipe1);
+	igt_output_set_pipe(data->mst_output[1], pipe2);
+
+	igt_create_color_fb(data->drm_fd, data->mode_mst[0].hdisplay, data->mode_mst[0].vdisplay,
+			    DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR, 1, 0, 0, &fbs[0]);
+	igt_create_color_fb(data->drm_fd, data->mode_mst[1].hdisplay, data->mode_mst[1].vdisplay,
+			    DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR, 0, 0, 1, &fbs[1]);
+
+	plane[0] = igt_pipe_get_plane_type(&display->pipes[pipe1], DRM_PLANE_TYPE_PRIMARY);
+	plane[1] = igt_pipe_get_plane_type(&display->pipes[pipe2], DRM_PLANE_TYPE_PRIMARY);
+
+	igt_plane_set_fb(plane[0], &fbs[0]);
+	igt_fb_set_size(&fbs[0], plane[0], data->mode_mst[0].hdisplay, data->mode_mst[0].vdisplay);
+	igt_plane_set_size(plane[0], data->mode_mst[0].hdisplay, data->mode_mst[0].vdisplay);
+
+	igt_plane_set_fb(plane[1], &fbs[1]);
+	igt_fb_set_size(&fbs[1], plane[1], data->mode_mst[1].hdisplay, data->mode_mst[1].vdisplay);
+	igt_plane_set_size(plane[1], data->mode_mst[1].hdisplay, data->mode_mst[1].vdisplay);
+
+	igt_output_override_mode(data->mst_output[0], &data->mode_mst[0]);
+	igt_output_override_mode(data->mst_output[1], &data->mode_mst[1]);
+
+	igt_require(i915_pipe_output_combo_valid(display));
+	ret = igt_display_try_commit2(display, COMMIT_ATOMIC);
+	igt_assert(ret != 0 && errno == ENOSPC);
+}
+
 igt_main
 {
+	int dp_mst_outputs = 0, count = 0;
+	enum pipe pipe1, pipe2;
+	igt_output_t *output;
 	data_t data;
 
 	igt_fixture {
@@ -182,12 +318,41 @@ igt_main
 		kmstest_set_vt_graphics_mode();
 		igt_display_require(&data.display, data.drm_fd);
 		igt_display_require_output(&data.display);
+
+		for_each_connected_output(&data.display, output) {
+			data.mst_output[count++] = output;
+			if (output_is_dp_mst(&data, output, dp_mst_outputs))
+				dp_mst_outputs++;
+		}
 	}
 
 	igt_describe("Test for validating display extended mode with a pair of connected displays");
 	igt_subtest_with_dynamic("extended-mode-basic")
 		run_extendedmode_test(&data);
 
+	igt_describe("Negative test for validating display extended mode with a pair of connected "
+		     "2k-4k or 4k-4k displays");
+	igt_subtest_with_dynamic("mst-extended-mode-negative") {
+		igt_require_f(dp_mst_outputs > 1, "MST not found more then one\n");
+
+		memcpy(&data.mode_mst[0], get_mode(data.mst_output[0]), sizeof(drmModeModeInfo));
+		memcpy(&data.mode_mst[1], get_highres_mode(data.mst_output[1]),
+				sizeof(drmModeModeInfo));
+		igt_require_f((data.mode_mst[1].hdisplay >= HDISPLAY_4K &&
+			       data.mode_mst[1].vdisplay >= VDISPLAY_4K), "4k panel not found\n");
+
+		for_each_pipe(&data.display, pipe1) {
+			for_each_pipe(&data.display, pipe2) {
+				if (pipe1 == pipe2)
+					continue;
+
+				igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe1),
+					      kmstest_pipe_name(pipe2))
+					run_extendedmode_negative(&data, pipe1, pipe2);
+			}
+		}
+	}
+
 	igt_fixture {
 		igt_display_fini(&data.display);
 	}
Signature · 1 line
2.25.1
#2 lore raw

Re: [igt-dev] [PATCH v3 1/2] tests/kms_display_modes: Add negative test for extended display

Hi,

Quoted 1 line · Mohammed Thasleem

Added negative test to validte ENOSPC when two 2k-4k or 4k-4k

----------------------------- ^
validate

Quoted 1 line

moniters connected through MST.

------ ^
monitors
Btw could you decipher here MST like:

MST (Multi-Stream Transport).

Quoted 1 line

This test added to provide bandwidth issue in MST config.

-------------------- ^
It is unclear, I guess the bw is limited so maybe write here what it is ? Like:

Bandwidth of MST is limited to two 2k monitors.

Please correct my guess in above statement (maybe it is even more limited and max is two 1k ?)
What is max bw for MST connection ? Your code tests for 4k-4k ?

Quoted 3 lines

Example:
When two monitors connected through MST, the second monitor

-------------------- ^
are

Quoted 1 line

also tries to use the same mode. So two such modes may not

------------------------------------ ^
s/So two/Two/

Quoted 1 line

fit into the link bandwidth. So, iterate through connected

s/So, iterate/Iterate/

Quoted 1 line

outputs & modes and find a invalid combination.

---------------------------- ^
s/a/an/

Quoted 19 lines

v2: Rebased on tip.
v3: -Code cleanup and updated description.
-Free path_blob before call return. (Kamil)
v4: Updated code formatting and function description. (Jeevan)
v5: Updated commit description and minor changes.
v6: Added bigjoiner check and updated comments. (Bhanu)

---
 tests/kms_display_modes.c | 165 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 165 insertions(+)
tests/kms_display_modes.c +0 -0
index d69c7b931..892f39b20 100644

tests/kms_display_modes.c line 31

Quoted 6 lines
tests/kms_display_modes.c +3 -0
@@ -26,14 +26,111 @@
 
 #include "igt.h"
 
+#define HDISPLAY_4K	3840
+#define VDISPLAY_4K	2160
+

You wrote in commit msg about 2k, why not add it here ?

Quoted 169 lines
tests/kms_display_modes.c +139 -0
 IGT_TEST_DESCRIPTION("Test Display Modes");
 
 typedef struct {
 	int drm_fd;
 	igt_display_t display;
+	drmModeModeInfo mode_mst[2];
+	igt_output_t *mst_output[2];
 	int n_pipes;
 } data_t;
 
+/* Get higher mode supported by panel. */
+static drmModeModeInfo *get_highres_mode(igt_output_t *output)
+{
+	drmModeConnector *connector = output->config.connector;
+	drmModeModeInfo *highest_mode = NULL;
+
+	igt_sort_connector_modes(connector, sort_drm_modes_by_res_dsc);
+	highest_mode = &connector->modes[0];
+
+	return highest_mode;
+}
+
+/* Get the 4k or less then 4k mode of connected panel. */
+static drmModeModeInfo *get_mode(igt_output_t *output)
+{
+	int j;
+	drmModeModeInfo *required_mode = NULL;
+	drmModeConnector *connector = output->config.connector;
+
+	required_mode = igt_output_get_mode(output);
+	if (required_mode->vdisplay <= VDISPLAY_4K &&
+	    required_mode->hdisplay <= HDISPLAY_4K) {
+		return required_mode;
+	}
+
+	/* If default mode not 4k or less than 4k mode, then sort modes and check for it. */
+	igt_sort_connector_modes(connector, sort_drm_modes_by_res_dsc);
+	for (j = 0; j < connector->count_modes; j++) {
+		if (connector->modes[j].vdisplay <= VDISPLAY_4K &&
+		    connector->modes[j].hdisplay <= HDISPLAY_4K) {
+			required_mode = &connector->modes[j];
+			break;
+		}
+	}
+
+	return required_mode;
+}
+
+static int parse_path_blob(char *blob_data)
+{
+	int connector_id;
+	char *encoder;
+
+	encoder = strtok(blob_data, ":");
+	igt_assert_f(!strcmp(encoder, "mst"), "PATH connector property expected to have 'mst'\n");
+
+	connector_id = atoi(strtok(NULL, "-"));
+
+	return connector_id;
+}
+
+static bool output_is_dp_mst(data_t *data, igt_output_t *output, int i)
+{
+	drmModePropertyBlobPtr path_blob = NULL;
+	uint64_t path_blob_id;
+	drmModeConnector *connector = output->config.connector;
+	struct kmstest_connector_config config;
+	const char *encoder;
+	int connector_id;
+	static int prev_connector_id;
+
+	kmstest_get_connector_config(data->drm_fd, output->config.connector->connector_id,
+				     -1, &config);
+	encoder = kmstest_encoder_type_str(config.encoder->encoder_type);
+
+	if (strcmp(encoder, "DP MST"))
+		return false;
+
+	igt_assert(kmstest_get_property(data->drm_fd, connector->connector_id,
+		   DRM_MODE_OBJECT_CONNECTOR, "PATH", NULL,
+		   &path_blob_id, NULL));
+
+	igt_assert(path_blob = drmModeGetPropertyBlob(data->drm_fd, path_blob_id));
+
+	connector_id = parse_path_blob((char *) path_blob->data);
+
+	drmModeFreePropertyBlob(path_blob);
+
+	/*
+	 * Discarding outputs of other DP MST topology.
+	 * Testing only on outputs on the topology we got previously
+	 */
+	if (i == 0) {
+		prev_connector_id = connector_id;
+	} else {
+		if (connector_id != prev_connector_id)
+			return false;
+	}
+
+	return true;
+}
+
 static void run_extendedmode_basic(data_t *data,
 				   enum pipe pipe1, igt_output_t *output1,
 				   enum pipe pipe2, igt_output_t *output2)
@@ -173,8 +270,47 @@ static void run_extendedmode_test(data_t *data) {
 	}
 }
 
+static void run_extendedmode_negative(data_t *data, int pipe1, int pipe2)
+{
+	struct igt_fb fbs[2];
+	igt_display_t *display = &data->display;
+	igt_plane_t *plane[2];
+	int ret;
+
+	igt_display_reset(display);
+
+	igt_output_set_pipe(data->mst_output[0], pipe1);
+	igt_output_set_pipe(data->mst_output[1], pipe2);
+
+	igt_create_color_fb(data->drm_fd, data->mode_mst[0].hdisplay, data->mode_mst[0].vdisplay,
+			    DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR, 1, 0, 0, &fbs[0]);
+	igt_create_color_fb(data->drm_fd, data->mode_mst[1].hdisplay, data->mode_mst[1].vdisplay,
+			    DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR, 0, 0, 1, &fbs[1]);
+
+	plane[0] = igt_pipe_get_plane_type(&display->pipes[pipe1], DRM_PLANE_TYPE_PRIMARY);
+	plane[1] = igt_pipe_get_plane_type(&display->pipes[pipe2], DRM_PLANE_TYPE_PRIMARY);
+
+	igt_plane_set_fb(plane[0], &fbs[0]);
+	igt_fb_set_size(&fbs[0], plane[0], data->mode_mst[0].hdisplay, data->mode_mst[0].vdisplay);
+	igt_plane_set_size(plane[0], data->mode_mst[0].hdisplay, data->mode_mst[0].vdisplay);
+
+	igt_plane_set_fb(plane[1], &fbs[1]);
+	igt_fb_set_size(&fbs[1], plane[1], data->mode_mst[1].hdisplay, data->mode_mst[1].vdisplay);
+	igt_plane_set_size(plane[1], data->mode_mst[1].hdisplay, data->mode_mst[1].vdisplay);
+
+	igt_output_override_mode(data->mst_output[0], &data->mode_mst[0]);
+	igt_output_override_mode(data->mst_output[1], &data->mode_mst[1]);
+
+	igt_require(i915_pipe_output_combo_valid(display));
+	ret = igt_display_try_commit2(display, COMMIT_ATOMIC);
+	igt_assert(ret != 0 && errno == ENOSPC);
+}
+
 igt_main
 {
+	int dp_mst_outputs = 0, count = 0;
+	enum pipe pipe1, pipe2;
+	igt_output_t *output;
 	data_t data;
 
 	igt_fixture {
@@ -182,12 +318,41 @@ igt_main
 		kmstest_set_vt_graphics_mode();
 		igt_display_require(&data.display, data.drm_fd);
 		igt_display_require_output(&data.display);
+
+		for_each_connected_output(&data.display, output) {
+			data.mst_output[count++] = output;
+			if (output_is_dp_mst(&data, output, dp_mst_outputs))
+				dp_mst_outputs++;
+		}
 	}
 
 	igt_describe("Test for validating display extended mode with a pair of connected displays");
 	igt_subtest_with_dynamic("extended-mode-basic")
 		run_extendedmode_test(&data);
 

tests/kms_display_modes.c igt_main · line 342

Quoted 10 lines
tests/kms_display_modes.c +10 -0
+	igt_describe("Negative test for validating display extended mode with a pair of connected "
+		     "2k-4k or 4k-4k displays");
+	igt_subtest_with_dynamic("mst-extended-mode-negative") {
+		igt_require_f(dp_mst_outputs > 1, "MST not found more then one\n");
+
+		memcpy(&data.mode_mst[0], get_mode(data.mst_output[0]), sizeof(drmModeModeInfo));
+		memcpy(&data.mode_mst[1], get_highres_mode(data.mst_output[1]),
+				sizeof(drmModeModeInfo));
+		igt_require_f((data.mode_mst[1].hdisplay >= HDISPLAY_4K &&
+			       data.mode_mst[1].vdisplay >= VDISPLAY_4K), "4k panel not found\n");

You are not checking >= 2k on mst[0] here.

Regards,
Kamil

Quoted 19 lines
tests/kms_display_modes.c +13 -0
+
+		for_each_pipe(&data.display, pipe1) {
+			for_each_pipe(&data.display, pipe2) {
+				if (pipe1 == pipe2)
+					continue;
+
+				igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe1),
+					      kmstest_pipe_name(pipe2))
+					run_extendedmode_negative(&data, pipe1, pipe2);
+			}
+		}
+	}
+
 	igt_fixture {
 		igt_display_fini(&data.display);
 	}
Signature · 1 line
2.25.1
#3 lore raw

Re: [igt-dev] [PATCH v3 1/2] tests/kms_display_modes: Add negative test for extended display

In reply to Mohammed Thasleem

Hi Mohammed,

Quoted 203 lines · Mohammed Thasleem

Added negative test to validte ENOSPC when two 2k-4k or 4k-4k moniters connected through MST.
This test added to provide bandwidth issue in MST config.

Example:
When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth. So, iterate through connected outputs & modes and find a invalid combination.

v2: Rebased on tip.
v3: -Code cleanup and updated description.
-Free path_blob before call return. (Kamil)
v4: Updated code formatting and function description. (Jeevan)
v5: Updated commit description and minor changes.
v6: Added bigjoiner check and updated comments. (Bhanu)

---
 tests/kms_display_modes.c | 165 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 165 insertions(+)
tests/kms_display_modes.c +142 -0
index d69c7b931..892f39b20 100644
@@ -26,14 +26,111 @@
 
 #include "igt.h"
 
+#define HDISPLAY_4K	3840
+#define VDISPLAY_4K	2160
+
 IGT_TEST_DESCRIPTION("Test Display Modes");
 
 typedef struct {
 	int drm_fd;
 	igt_display_t display;
+	drmModeModeInfo mode_mst[2];
+	igt_output_t *mst_output[2];
 	int n_pipes;
 } data_t;
 
+/* Get higher mode supported by panel. */
+static drmModeModeInfo *get_highres_mode(igt_output_t *output)
+{
+	drmModeConnector *connector = output->config.connector;
+	drmModeModeInfo *highest_mode = NULL;
+
+	igt_sort_connector_modes(connector, sort_drm_modes_by_res_dsc);
+	highest_mode = &connector->modes[0];
+
+	return highest_mode;
+}
+
+/* Get the 4k or less then 4k mode of connected panel. */
+static drmModeModeInfo *get_mode(igt_output_t *output)
+{
+	int j;
+	drmModeModeInfo *required_mode = NULL;
+	drmModeConnector *connector = output->config.connector;
+
+	required_mode = igt_output_get_mode(output);
+	if (required_mode->vdisplay <= VDISPLAY_4K &&
+	    required_mode->hdisplay <= HDISPLAY_4K) {
+		return required_mode;
+	}
+
+	/* If default mode not 4k or less than 4k mode, then sort modes and check for it. */
+	igt_sort_connector_modes(connector, sort_drm_modes_by_res_dsc);
+	for (j = 0; j < connector->count_modes; j++) {
+		if (connector->modes[j].vdisplay <= VDISPLAY_4K &&
+		    connector->modes[j].hdisplay <= HDISPLAY_4K) {
+			required_mode = &connector->modes[j];
+			break;
+		}
+	}
+
+	return required_mode;
+}
+
+static int parse_path_blob(char *blob_data)
+{
+	int connector_id;
+	char *encoder;
+
+	encoder = strtok(blob_data, ":");
+	igt_assert_f(!strcmp(encoder, "mst"), "PATH connector property expected to have 'mst'\n");
+
+	connector_id = atoi(strtok(NULL, "-"));
+
+	return connector_id;
+}
+
+static bool output_is_dp_mst(data_t *data, igt_output_t *output, int i)
+{
+	drmModePropertyBlobPtr path_blob = NULL;
+	uint64_t path_blob_id;
+	drmModeConnector *connector = output->config.connector;
+	struct kmstest_connector_config config;
+	const char *encoder;
+	int connector_id;
+	static int prev_connector_id;
+
+	kmstest_get_connector_config(data->drm_fd, output->config.connector->connector_id,
+				     -1, &config);
+	encoder = kmstest_encoder_type_str(config.encoder->encoder_type);
+
+	if (strcmp(encoder, "DP MST"))
+		return false;
+
+	igt_assert(kmstest_get_property(data->drm_fd, connector->connector_id,
+		   DRM_MODE_OBJECT_CONNECTOR, "PATH", NULL,
+		   &path_blob_id, NULL));
+
+	igt_assert(path_blob = drmModeGetPropertyBlob(data->drm_fd, path_blob_id));
+
+	connector_id = parse_path_blob((char *) path_blob->data);
+
+	drmModeFreePropertyBlob(path_blob);
+
+	/*
+	 * Discarding outputs of other DP MST topology.
+	 * Testing only on outputs on the topology we got previously
+	 */
+	if (i == 0) {
+		prev_connector_id = connector_id;
+	} else {
+		if (connector_id != prev_connector_id)
+			return false;
+	}
+
+	return true;
+}
+
 static void run_extendedmode_basic(data_t *data,
 				   enum pipe pipe1, igt_output_t *output1,
 				   enum pipe pipe2, igt_output_t *output2)
@@ -173,8 +270,47 @@ static void run_extendedmode_test(data_t *data) {
 	}
 }
 
+static void run_extendedmode_negative(data_t *data, int pipe1, int pipe2)
+{
+	struct igt_fb fbs[2];
+	igt_display_t *display = &data->display;
+	igt_plane_t *plane[2];
+	int ret;
+
+	igt_display_reset(display);
+
+	igt_output_set_pipe(data->mst_output[0], pipe1);
+	igt_output_set_pipe(data->mst_output[1], pipe2);
+
+	igt_create_color_fb(data->drm_fd, data->mode_mst[0].hdisplay, data->mode_mst[0].vdisplay,
+			    DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR, 1, 0, 0, &fbs[0]);
+	igt_create_color_fb(data->drm_fd, data->mode_mst[1].hdisplay, data->mode_mst[1].vdisplay,
+			    DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR, 0, 0, 1, &fbs[1]);
+
+	plane[0] = igt_pipe_get_plane_type(&display->pipes[pipe1], DRM_PLANE_TYPE_PRIMARY);
+	plane[1] = igt_pipe_get_plane_type(&display->pipes[pipe2], DRM_PLANE_TYPE_PRIMARY);
+
+	igt_plane_set_fb(plane[0], &fbs[0]);
+	igt_fb_set_size(&fbs[0], plane[0], data->mode_mst[0].hdisplay, data->mode_mst[0].vdisplay);
+	igt_plane_set_size(plane[0], data->mode_mst[0].hdisplay, data->mode_mst[0].vdisplay);
+
+	igt_plane_set_fb(plane[1], &fbs[1]);
+	igt_fb_set_size(&fbs[1], plane[1], data->mode_mst[1].hdisplay, data->mode_mst[1].vdisplay);
+	igt_plane_set_size(plane[1], data->mode_mst[1].hdisplay, data->mode_mst[1].vdisplay);
+
+	igt_output_override_mode(data->mst_output[0], &data->mode_mst[0]);
+	igt_output_override_mode(data->mst_output[1], &data->mode_mst[1]);
+
+	igt_require(i915_pipe_output_combo_valid(display));
+	ret = igt_display_try_commit2(display, COMMIT_ATOMIC);
+	igt_assert(ret != 0 && errno == ENOSPC);
+}
+
 igt_main
 {
+	int dp_mst_outputs = 0, count = 0;
+	enum pipe pipe1, pipe2;
+	igt_output_t *output;
 	data_t data;
 
 	igt_fixture {
@@ -182,12 +318,41 @@ igt_main
 		kmstest_set_vt_graphics_mode();
 		igt_display_require(&data.display, data.drm_fd);
 		igt_display_require_output(&data.display);
+
+		for_each_connected_output(&data.display, output) {
+			data.mst_output[count++] = output;
+			if (output_is_dp_mst(&data, output, dp_mst_outputs))
+				dp_mst_outputs++;
+		}
 	}
 
 	igt_describe("Test for validating display extended mode with a pair of connected displays");
 	igt_subtest_with_dynamic("extended-mode-basic")
 		run_extendedmode_test(&data);
 

tests/kms_display_modes.c igt_main · line 342

Quoted 10 lines
tests/kms_display_modes.c +10 -0
+	igt_describe("Negative test for validating display extended mode with a pair of connected "
+		     "2k-4k or 4k-4k displays");
+	igt_subtest_with_dynamic("mst-extended-mode-negative") {
+		igt_require_f(dp_mst_outputs > 1, "MST not found more then one\n");
+
+		memcpy(&data.mode_mst[0], get_mode(data.mst_output[0]), sizeof(drmModeModeInfo));
+		memcpy(&data.mode_mst[1], get_highres_mode(data.mst_output[1]),
+				sizeof(drmModeModeInfo));
+		igt_require_f((data.mode_mst[1].hdisplay >= HDISPLAY_4K &&
+			       data.mode_mst[1].vdisplay >= VDISPLAY_4K), "4k panel not found\n");

I just realised that you sorted that so no need for [0] checks. I merged your series after correcting some misspellings.

Regards,
Kamil

Quoted 19 lines
tests/kms_display_modes.c +13 -0
+
+		for_each_pipe(&data.display, pipe1) {
+			for_each_pipe(&data.display, pipe2) {
+				if (pipe1 == pipe2)
+					continue;
+
+				igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe1),
+					      kmstest_pipe_name(pipe2))
+					run_extendedmode_negative(&data, pipe1, pipe2);
+			}
+		}
+	}
+
 	igt_fixture {
 		igt_display_fini(&data.display);
 	}
Signature · 1 line
2.25.1
#4 lore raw

PATCH v3 2/2 lib/igt_kms: Check for other modes to fit on bw when ENOSPC failure

In reply to Mohammed Thasleem

It check other then ENOSPC failure and if its ENOSPC then check all active outputs modes to fit possible bw and return false if not found any suitable bw.

v2: Check for other then ENOSPC failure. (Bhanu)
v3: Updated commit message.

---
 lib/igt_kms.c | 2 ++
 1 file changed, 2 insertions(+)
lib/igt_kms.c +2 -0
index a6e91f982..5047d4b1b 100644
@@ -4574,6 +4574,8 @@ bool __override_all_active_output_modes_to_fit_bw(igt_display_t *display,
 
 		if (!ret)
 			return true;
+		else if (ret != -ENOSPC)
+			return false;
 	}
 
 	return false;
Signature · 1 line
2.25.1
Reviewed-by on v3 2/2
#5 lore raw

Re: [igt-dev] [PATCH v3 2/2] lib/igt_kms: Check for other modes to fit on bw when ENOSPC failure

Quoted 8 lines · Mohammed Thasleem

It check other then ENOSPC failure and if its ENOSPC then check all active outputs modes to fit possible bw and return false if not found any suitable bw.

v2: Check for other then ENOSPC failure. (Bhanu)
v3: Updated commit message.

Quoted 17 lines
---
  lib/igt_kms.c | 2 ++
  1 file changed, 2 insertions(+)
lib/igt_kms.c +2 -0
index a6e91f982..5047d4b1b 100644
@@ -4574,6 +4574,8 @@ bool __override_all_active_output_modes_to_fit_bw(igt_display_t *display,
 
  		if (!ret)
  			return true;
+		else if (ret != -ENOSPC)
+			return false;
  	}
 
  	return false;
#6 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for Add negative test for extended display (rev2)

In reply to Mohammed Thasleem
== Series Details ==

== Series Details ==

Series: Add negative test for extended display (rev2)
URL : https://patchwork.freedesktop.org/series/117348/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_13116 -> IGTPW_8926
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/index.html

Participating hosts (41 -> 38)
------------------------------

Missing (3): fi-kbl-soraka fi-snb-2520m bat-mtlp-6

Known issues
------------

Here are the changes found in IGTPW_8926 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_suspend@basic-s3@smem:
- bat-rpls-1: [PASS][1] -> [ABORT][2] ([i915#6687] / [i915#7978] / [i915#8407])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/bat-rpls-1/igt@gem_exec_suspend@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/bat-rpls-1/igt@gem_exec_suspend@[email protected]

* igt@i915_selftest@live@requests:
- bat-rplp-1: [PASS][3] -> [ABORT][4] ([i915#7913] / [i915#7920])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/bat-rplp-1/igt@i915_selftest@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/bat-rplp-1/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@slpc:
- bat-rpls-2: NOTRUN -> [DMESG-WARN][5] ([i915#6367])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/bat-rpls-2/igt@i915_selftest@[email protected]

* igt@kms_chamelium_hpd@common-hpd-after-suspend:
- bat-rpls-2: NOTRUN -> [SKIP][6] ([i915#7828])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/bat-rpls-2/igt@[email protected]

* igt@kms_pipe_crc_basic@suspend-read-crc:
- bat-rpls-2: NOTRUN -> [SKIP][7] ([i915#1845])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/bat-rpls-2/igt@[email protected]

#### Possible fixes ####

* igt@gem_exec_suspend@basic-s3@smem:
- fi-rkl-11600: [FAIL][8] ([fdo#103375]) -> [PASS][9]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/fi-rkl-11600/igt@gem_exec_suspend@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/fi-rkl-11600/igt@gem_exec_suspend@[email protected]

* igt@i915_selftest@live@gt_heartbeat:
- fi-apl-guc: [DMESG-FAIL][10] ([i915#5334]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/fi-apl-guc/igt@i915_selftest@live@gt_heartbeat.html
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/fi-apl-guc/igt@i915_selftest@live@gt_heartbeat.html

* igt@i915_selftest@live@reset:
- bat-rpls-2: [ABORT][12] ([i915#4983] / [i915#7461] / [i915#7913] / [i915#8347]) -> [PASS][13]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/bat-rpls-2/igt@i915_selftest@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/bat-rpls-2/igt@i915_selftest@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[i915#1845]: https://gitlab.freedesktop.org/drm/intel/issues/1845
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#5334]: https://gitlab.freedesktop.org/drm/intel/issues/5334
[i915#6367]: https://gitlab.freedesktop.org/drm/intel/issues/6367
[i915#6687]: https://gitlab.freedesktop.org/drm/intel/issues/6687
[i915#7461]: https://gitlab.freedesktop.org/drm/intel/issues/7461
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#7913]: https://gitlab.freedesktop.org/drm/intel/issues/7913
[i915#7920]: https://gitlab.freedesktop.org/drm/intel/issues/7920
[i915#7978]: https://gitlab.freedesktop.org/drm/intel/issues/7978
[i915#8347]: https://gitlab.freedesktop.org/drm/intel/issues/8347
[i915#8407]: https://gitlab.freedesktop.org/drm/intel/issues/8407

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7281 -> IGTPW_8926

CI-20190529: 20190529
CI_DRM_13116: b34e363a43006fbfcdd34c40a774a939b5361865 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8926: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/index.html
IGT_7281: 9e9cd7e69a393b7cce8fc12fce409eb59817dd7e @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

Testlist changes
----------------

+igt@kms_display_modes@mst-extended-mode-negative

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/index.html

#7 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for Add negative test for extended display (rev2)

In reply to Mohammed Thasleem
== Series Details ==

== Series Details ==

Series: Add negative test for extended display (rev2)
URL : https://patchwork.freedesktop.org/series/117348/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_13116_full -> IGTPW_8926_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/index.html

Participating hosts (7 -> 7)
------------------------------

No changes in participating hosts

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_8926_full:

### IGT changes ###

#### Possible regressions ####

* {igt@kms_display_modes@mst-extended-mode-negative} (NEW):
- {shard-dg1}: NOTRUN -> [SKIP][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-dg1-16/igt@[email protected]
- {shard-tglu}: NOTRUN -> [SKIP][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-tglu-4/igt@[email protected]

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@prime_vgem@basic-write:
- {shard-rkl}: [SKIP][3] ([fdo#109295] / [i915#3291] / [i915#3708]) -> [ABORT][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-rkl-7/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-rkl-3/igt@[email protected]

New tests
---------

New tests have been introduced between CI_DRM_13116_full and IGTPW_8926_full:

### New IGT tests (1) ###

* igt@kms_display_modes@mst-extended-mode-negative:
- Statuses : 5 skip(s)
- Exec time: [0.0] s

Known issues
------------

Here are the changes found in IGTPW_8926_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_barrier_race@remote-request@rcs0:
- shard-apl: [PASS][5] -> [ABORT][6] ([i915#7461] / [i915#8211] / [i915#8234])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-apl7/igt@gem_barrier_race@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-apl6/igt@gem_barrier_race@[email protected]

* igt@gem_exec_fair@basic-deadline:
- shard-glk: [PASS][7] -> [FAIL][8] ([i915#2846])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-glk1/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-glk8/igt@[email protected]

* igt@gem_exec_fair@basic-none-solo@rcs0:
- shard-apl: [PASS][9] -> [FAIL][10] ([i915#2842])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-apl4/igt@gem_exec_fair@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-apl6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-glk: [PASS][11] -> [FAIL][12] ([i915#2842])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-glk1/igt@gem_exec_fair@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-glk1/igt@gem_exec_fair@[email protected]

* igt@gen9_exec_parse@allowed-single:
- shard-glk: [PASS][13] -> [ABORT][14] ([i915#5566])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-glk1/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-glk5/igt@[email protected]

* igt@i915_module_load@reload-no-display:
- shard-snb: [PASS][15] -> [ABORT][16] ([i915#4528] / [i915#8393])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-snb4/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-snb6/igt@[email protected]

* igt@i915_selftest@live@gt_heartbeat:
- shard-apl: [PASS][17] -> [DMESG-FAIL][18] ([i915#5334])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-apl7/igt@i915_selftest@live@gt_heartbeat.html
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-apl6/igt@i915_selftest@live@gt_heartbeat.html

* igt@kms_color@ctm-max@pipe-a-hdmi-a-1:
- shard-snb: NOTRUN -> [SKIP][19] ([fdo#109271]) +29 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-snb1/igt@kms_color@[email protected]

* igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size:
- shard-glk: [PASS][20] -> [FAIL][21] ([i915#2346])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-glk1/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size.html
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-glk1/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size.html

* {igt@kms_display_modes@mst-extended-mode-negative} (NEW):
- shard-apl: NOTRUN -> [SKIP][22] ([fdo#109271])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-apl7/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][23] ([fdo#109271])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-glk4/igt@[email protected]

* igt@kms_flip@flip-vs-suspend@a-dp1:
- shard-apl: [PASS][24] -> [ABORT][25] ([i915#180])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-apl1/igt@kms_flip@[email protected]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-apl3/igt@kms_flip@[email protected]

#### Possible fixes ####

* igt@gem_eio@unwedge-stress:
- {shard-dg1}: [FAIL][26] ([i915#5784]) -> [PASS][27]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-dg1-14/igt@[email protected]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-dg1-17/igt@[email protected]

* igt@gem_exec_fair@basic-none@vecs0:
- {shard-rkl}: [FAIL][28] ([i915#2842]) -> [PASS][29]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-rkl-4/igt@gem_exec_fair@[email protected]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-rkl-7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-share@rcs0:
- {shard-tglu}: [FAIL][30] ([i915#2842]) -> [PASS][31]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-tglu-9/igt@gem_exec_fair@[email protected]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-tglu-5/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-solo@rcs0:
- shard-apl: [FAIL][32] ([i915#2842]) -> [PASS][33]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-apl1/igt@gem_exec_fair@[email protected]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-apl6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs0:
- shard-glk: [FAIL][34] ([i915#2842]) -> [PASS][35] +1 similar issue
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-glk5/igt@gem_exec_fair@[email protected]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-glk9/igt@gem_exec_fair@[email protected]

* igt@i915_pm_dc@dc9-dpms:
- shard-apl: [SKIP][36] ([fdo#109271]) -> [PASS][37]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-apl2/igt@[email protected]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-apl4/igt@[email protected]

* igt@i915_pm_rpm@modeset-non-lpsp-stress:
- {shard-rkl}: [SKIP][38] ([i915#1397]) -> [PASS][39]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-rkl-7/igt@[email protected]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-rkl-1/igt@[email protected]

* igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions:
- shard-apl: [FAIL][40] ([i915#2346]) -> [PASS][41]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-apl1/igt@[email protected]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-apl7/igt@[email protected]

* igt@perf_pmu@idle@rcs0:
- {shard-dg1}: [FAIL][42] ([i915#4349]) -> [PASS][43]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-dg1-16/igt@perf_pmu@[email protected]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-dg1-17/igt@perf_pmu@[email protected]
- {shard-rkl}: [FAIL][44] ([i915#4349]) -> [PASS][45]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13116/shard-rkl-1/igt@perf_pmu@[email protected]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/shard-rkl-2/igt@perf_pmu@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[IGT#2]: https://gitlab.freedesktop.org/drm/igt-gpu-tools/issues/2
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109300]: https://bugs.freedesktop.org/show_bug.cgi?id=109300
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#1397]: https://gitlab.freedesktop.org/drm/intel/issues/1397
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1825]: https://gitlab.freedesktop.org/drm/intel/issues/1825
[i915#2346]: https://gitlab.freedesktop.org/drm/intel/issues/2346
[i915#2437]: https://gitlab.freedesktop.org/drm/intel/issues/2437
[i915#2527]: https://gitlab.freedesktop.org/drm/intel/issues/2527
[i915#2575]: https://gitlab.freedesktop.org/drm/intel/issues/2575
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#2681]: https://gitlab.freedesktop.org/drm/intel/issues/2681
[i915#2705]: https://gitlab.freedesktop.org/drm/intel/issues/2705
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#2846]: https://gitlab.freedesktop.org/drm/intel/issues/2846
[i915#3023]: https://gitlab.freedesktop.org/drm/intel/issues/3023
[i915#3116]: https://gitlab.freedesktop.org/drm/intel/issues/3116
[i915#3281]: https://gitlab.freedesktop.org/drm/intel/issues/3281
[i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
[i915#3291]: https://gitlab.freedesktop.org/drm/intel/issues/3291
[i915#3359]: https://gitlab.freedesktop.org/drm/intel/issues/3359
[i915#3458]: https://gitlab.freedesktop.org/drm/intel/issues/3458
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3591]: https://gitlab.freedesktop.org/drm/intel/issues/3591
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#3689]: https://gitlab.freedesktop.org/drm/intel/issues/3689
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#3734]: https://gitlab.freedesktop.org/drm/intel/issues/3734
[i915#3840]: https://gitlab.freedesktop.org/drm/intel/issues/3840
[i915#3886]: https://gitlab.freedesktop.org/drm/intel/issues/3886
[i915#3955]: https://gitlab.freedesktop.org/drm/intel/issues/3955
[i915#4070]: https://gitlab.freedesktop.org/drm/intel/issues/4070
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4213]: https://gitlab.freedesktop.org/drm/intel/issues/4213
[i915#4270]: https://gitlab.freedesktop.org/drm/intel/issues/4270
[i915#4349]: https://gitlab.freedesktop.org/drm/intel/issues/4349
[i915#4528]: https://gitlab.freedesktop.org/drm/intel/issues/4528
[i915#4538]: https://gitlab.freedesktop.org/drm/intel/issues/4538
[i915#4579]: https://gitlab.freedesktop.org/drm/intel/issues/4579
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4812]: https://gitlab.freedesktop.org/drm/intel/issues/4812
[i915#4833]: https://gitlab.freedesktop.org/drm/intel/issues/4833
[i915#5176]: https://gitlab.freedesktop.org/drm/intel/issues/5176
[i915#5235]: https://gitlab.freedesktop.org/drm/intel/issues/5235
[i915#5286]: https://gitlab.freedesktop.org/drm/intel/issues/5286
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533
[i915#5334]: https://gitlab.freedesktop.org/drm/intel/issues/5334
[i915#5354]: https://gitlab.freedesktop.org/drm/intel/issues/5354
[i915#5566]: https://gitlab.freedesktop.org/drm/intel/issues/5566
[i915#5784]: https://gitlab.freedesktop.org/drm/intel/issues/5784
[i915#6095]: https://gitlab.freedesktop.org/drm/intel/issues/6095
[i915#6268]: https://gitlab.freedesktop.org/drm/intel/issues/6268
[i915#6493]: https://gitlab.freedesktop.org/drm/intel/issues/6493
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#6768]: https://gitlab.freedesktop.org/drm/intel/issues/6768
[i915#7116]: https://gitlab.freedesktop.org/drm/intel/issues/7116
[i915#7461]: https://gitlab.freedesktop.org/drm/intel/issues/7461
[i915#7582]: https://gitlab.freedesktop.org/drm/intel/issues/7582
[i915#7711]: https://gitlab.freedesktop.org/drm/intel/issues/7711
[i915#7742]: https://gitlab.freedesktop.org/drm/intel/issues/7742
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#8211]: https://gitlab.freedesktop.org/drm/intel/issues/8211
[i915#8234]: https://gitlab.freedesktop.org/drm/intel/issues/8234
[i915#8393]: https://gitlab.freedesktop.org/drm/intel/issues/8393
[i915#8411]: https://gitlab.freedesktop.org/drm/intel/issues/8411

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7281 -> IGTPW_8926
* Piglit: piglit_4509 -> None

CI-20190529: 20190529
CI_DRM_13116: b34e363a43006fbfcdd34c40a774a939b5361865 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8926: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/index.html
IGT_7281: 9e9cd7e69a393b7cce8fc12fce409eb59817dd7e @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8926/index.html