FAILED: patch "[PATCH] mtd: spi-nor: spansion: Enable JFFS2 write buffer for" failed to apply to 6.2-stable tree

The patch below does not apply to the 6.2-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.2.y
git checkout FETCH_HEAD
git cherry-pick -x 4199c1719e24e73be0acc8b0146fc31ad8af9771
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023050757-reactor-skipping-b9ed@gregkh' --subject-prefix 'PATCH 6.2.y' HEAD^..

Possible dependencies:

4199c1719e24 ("mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s25hx SEMPER flash")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 4199c1719e24e73be0acc8b0146fc31ad8af9771 Mon Sep 17 00:00:00 2001
From: Takahiro Kuwano <[email protected]>
Date: Thu, 6 Apr 2023 15:17:45 +0900
Subject: [PATCH] mtd: spi-nor: spansion: Enable JFFS2 write buffer for
Infineon s25hx SEMPER flash

Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program granularity is 16-byte ECC data unit size. JFFS2 supports write buffer mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE flag in order to enable JFFS2 write buffer mode support.

index 19b1436f36ea..4d0cc10e3d85 100644
@@ -442,13 +442,10 @@ static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor)
 
 static void s25hx_t_late_init(struct spi_nor *nor)
 {
-	struct spi_nor_flash_parameter *params = nor->params;
-
 	/* Fast Read 4B requires mode cycles */
-	params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
+	nor->params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
 
-	/* The writesize should be ECC data unit size */
-	params->writesize = 16;
+	cypress_nor_ecc_init(nor);
 }
 
 static struct spi_nor_fixups s25hx_t_fixups = {