workqueue: Implement automatic CPU intensive detection and add monitoring
Subsystems (4)
Tejun Heo
maintainerPATCH v2 1/1 workqueue: Implement automatic CPU intensive detection and add monitoring
v2: * Lai pointed out that !SM_NONE cases should also be notified. 0001 and
0004 are updated accordingly.
* PeterZ suggested reporting on work items that trigger the auto CPU intensive mechanism. 0006 adds reporting of work functions that trigger the mechanism repeatedly with exponential backoff.
Hello,
To reduce the number of concurrent worker threads, workqueue holds back starting per-cpu work items while the previous work item stays in the RUNNING state. As such a per-cpu work item which consumes a lot of CPU cycles, even if it has cond_resched()'s in the right places, can stall other per-cpu work items.
To support per-cpu work items that may occupy the CPU for a substantial period of time, workqueue has WQ_CPU_INTENSIVE flag which exempts work items issued through the marked workqueue from concurrency management - they're started immediately and don't block other work items. While this works, it's error-prone in that a workqueue user can easily forget to set the flag or set it unnecessarily. Furthermore, the impacts of the wrong flag setting can be rather indirect and challenging to root-cause.
This patchset makes workqueue auto-detect CPU intensive work items based on CPU consumption. If a work item consumes more than the threshold (5ms by default) of CPU time, it's automatically marked as CPU intensive when it gets scheduled out which unblocks starting of pending per-cpu work items.
The mechanism isn't foolproof in that the detection delays can add up if many CPU-hogging work items are queued at the same time. However, in such situations, the bigger problem likely is the CPU being saturated with per-cpu work items and the solution would be making them UNBOUND. Future changes will make UNBOUND workqueues more attractive by improving their locality behaviors and configurability. We might eventually remove the explicit WQ_CPU_INTENSIVE flag.
While at it, add statistics and a monitoring script. Lack of visibility has always been a bit of pain point when debugging workqueue related issues and with this change and more drastic ones planned for workqueue, this is a good time to address the shortcoming.
This patchset was born out of the discussion in the following thread:
https://lkml.kernel.org/r/CAHk-=wgE9kORADrDJ4nEsHHLirqPCZ1tGaEPAZejHdZ03qCOGg@mail.gmail.com
and contains the following five patches:
0001-workqueue-sched-Notify-workqueue-of-scheduling-of-RU.patch 0002-workqueue-Re-order-struct-worker-fields.patch 0003-workqueue-Move-worker_set-clr_flags-upwards.patch 0004-workqueue-Automatically-mark-CPU-hogging-work-items-.patch 0005-workqueue-Report-work-funcs-that-trigger-automatic-C.patch 0006-workqueue-Add-pwq-stats-and-a-monitoring-script.patch
and also available in the following git branch:
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git auto-cpu-intensive-v2
diffstat follows. Thanks.
Documentation/core-api/workqueue.rst | 30 ++ kernel/sched/core.c | 48 ++-- kernel/workqueue.c | 364 +++++++++++++++++++++++++++-------- kernel/workqueue_internal.h | 14 - lib/Kconfig.debug | 13 + tools/workqueue/wq_monitor.py | 148 ++++++++++++++ 6 files changed, 513 insertions(+), 104 deletions(-)
--
tejun
Tejun Heo
maintainerPATCH 1/6 workqueue, sched: Notify workqueue of scheduling of RUNNING and preempted tasks
When a workqueue kworker goes to sleep, wq_worker_sleeping() is called so that workqueue can manage concurrency. This patch renames wq_worker_sleeping() to wq_worker_stopping() and calls it whenever a kworker is scheduled out whether it's going to sleep or not.
Workqueue will use the schedule-out events of RUNNING tasks to automatically detect CPU hogging work items and exclude them from concurrency management so that they can't stall other work items.
sched_submit_work() and sched_update_work() were only called by schedule(). As workqueue would need to be notified of all scheduling events including preemptions, make the two functions notrace, add @sched_mode and call them from all schedule functions. As wq_worker_sleeping() is now called from preemption path, it's also marked notrace.
As sched_update_work() is noop when called !SM_NONE, it's debatable whether it needs to be called from !SM_NONE paths. However, it shouldn't add any actual overhead and is possibly less confusing to keep the symmetry. This can go either way.
The only functional change is that wq_worker_sleeping() is now called from all scheduling paths. As this patch adds early exit conditions which make it noop in all new invocations, there shouldn't be any behavior change. While at it, remove the already outdated comment which doesn't cover the io_wq case.
v2: Lai pointed out that !SM_NONE cases should also be notified. Updated
accordingly.
--- kernel/sched/core.c | 48 ++++++++++++++++++++++++------------- kernel/workqueue.c | 23 +++++++++++++----- kernel/workqueue_internal.h | 2 +- 3 files changed, 49 insertions(+), 24 deletions(-)
kernel/sched/core.c +31 -17
@@ -6692,24 +6692,20 @@ void __noreturn do_task_dead(void)cpu_relax (); } -static inline void sched_submit_work (struct task_struct *tsk) +static inline notrace void sched_submit_work(struct task_struct *tsk, +unsigned int sched_mode) { -unsigned int task_flags; +unsigned int task_flags = tsk->flags; +bool voluntary = sched_mode ==SM_NONE ; -if (task_is_running (tsk)) +if (task_flags &PF_WQ_WORKER ) +wq_worker_stopping (tsk, voluntary); + +if (!voluntary ||task_is_running (tsk))return ; - task_flags = tsk->flags; -/* -* If a worker goes to sleep, notify and ask workqueue whether it -* wants to wake up a task to maintain concurrency. -*/ -if (task_flags & (PF_WQ_WORKER |PF_IO_WORKER )) { -if (task_flags &PF_WQ_WORKER ) -wq_worker_sleeping (tsk); -else -io_wq_worker_sleeping (tsk); - } +if (task_flags &PF_IO_WORKER ) +io_wq_worker_sleeping (tsk);/* * spinlock and rwlock must not flush block requests. This will
@@ -6725,8 +6721,12 @@ static inline void sched_submit_work(struct task_struct *tsk)blk_flush_plug (tsk->plug, true); } -static void sched_update_worker (struct task_struct *tsk) +static notrace void sched_update_worker(struct task_struct *tsk, +unsigned int sched_mode) { +if (sched_mode !=SM_NONE ) +return ; +if (tsk->flags & (PF_WQ_WORKER |PF_IO_WORKER )) {if (tsk->flags &PF_WQ_WORKER )wq_worker_running (tsk);
@@ -6739,13 +6739,13 @@ asmlinkage __visible void __sched schedule(void) {struct task_struct *tsk = current; -sched_submit_work (tsk); +sched_submit_work (tsk,SM_NONE );do {preempt_disable ();__schedule (SM_NONE );sched_preempt_enable_no_resched (); }while (need_resched ()); -sched_update_worker (tsk); +sched_update_worker (tsk,SM_NONE ); }EXPORT_SYMBOL (schedule);
@@ -6808,17 +6808,24 @@ void __sched schedule_preempt_disabled(void)#ifdef CONFIG_PREEMPT_RT void __sched notrace schedule_rtlock(void) { +struct task_struct *tsk = current; + +sched_submit_work (tsk,SM_RTLOCK_WAIT );do {preempt_disable ();__schedule (SM_RTLOCK_WAIT );sched_preempt_enable_no_resched (); }while (need_resched ()); +sched_update_worker (tsk,SM_RTLOCK_WAIT ); }NOKPROBE_SYMBOL (schedule_rtlock);#endif static void __sched notrace preempt_schedule_common(void) { +struct task_struct *tsk = current; + +sched_submit_work (tsk,SM_PREEMPT ); do { /* * Because the function tracer can trace preempt_count_sub()
@@ -6844,6 +6851,7 @@ static void __sched notrace preempt_schedule_common(void)* between schedule and now. */ }while (need_resched ()); +sched_update_worker (tsk,SM_PREEMPT ); }#ifdef CONFIG_PREEMPTION
@@ -6901,11 +6909,13 @@ EXPORT_SYMBOL(dynamic_preempt_schedule);*/ asmlinkage __visible void __sched notrace preempt_schedule_notrace(void) { +struct task_struct *tsk = current;enum ctx_state prev_ctx;if (likely (!preemptible ()))return ; +sched_submit_work (tsk,SM_PREEMPT ); do { /* * Because the function tracer can trace preempt_count_sub()
@@ -6934,6 +6944,7 @@ asmlinkage __visible void __sched notrace preempt_schedule_notrace(void)preempt_latency_stop (1 );preempt_enable_no_resched_notrace (); }while (need_resched ()); +sched_update_worker (tsk,SM_PREEMPT ); }EXPORT_SYMBOL_GPL (preempt_schedule_notrace);
@@ -6968,11 +6979,13 @@ EXPORT_SYMBOL(dynamic_preempt_schedule_notrace);*/ asmlinkage __visible void __sched preempt_schedule_irq(void) { +struct task_struct *tsk = current;enum ctx_state prev_state;/* Catch callers which need to be fixed */ BUG_ON (preempt_count () || !irqs_disabled ()); +sched_submit_work (tsk,SM_PREEMPT ); prev_state =exception_enter (); do {
@@ -6984,6 +6997,7 @@ asmlinkage __visible void __sched preempt_schedule_irq(void) }while (need_resched ());exception_exit (prev_state); +sched_update_worker (tsk,SM_PREEMPT ); } int default_wake_function(wait_queue_entry_t *curr, unsigned mode, int wake_flags,
kernel/workqueue.c +17 -6
@@ -867,7 +867,10 @@ static void wake_up_worker(struct worker_pool *pool)* wq_worker_running - a worker is running again * @task: task waking up * -* This function is called when a worker returns from schedule() +* This function is called when a worker returns from schedule(). +* +* Unlike wq_worker_stopping(), this function is only called from schedule() but +* not other scheduling paths including preemption and can be traced safely. */ void wq_worker_running (struct task_struct *task) {
@@ -890,17 +893,25 @@ void wq_worker_running(struct task_struct *task) }/** -* wq_worker_sleeping - a worker is going to sleep -* @task: task going to sleep +* wq_worker_stopping - a worker is stopping +* @task: task stopping +* @voluntary: being called from schedule() +* +* This function is called from scheduling paths including schedule() and +* preemption when a busy worker is going off the CPU. * -* This function is called from schedule() when a busy worker is -* going to sleep. +* As this function may be called from preempt_enable_notrace() and friends when +* !@voluntary, it must be notrace and limit reentrancy when @voluntary to avoid +* infinite recursions. */ -void wq_worker_sleeping (struct task_struct *task) +void notrace wq_worker_stopping(struct task_struct *task, bool voluntary) {struct worker *worker =kthread_data (task);struct worker_pool *pool; +if (!voluntary ||task_is_running (task)) +return ; +/* * Rescuers, which may not have all the fields set up like normal * workers, also reach here, let's not access anything before
kernel/workqueue_internal.h +1 -1
@@ -75,7 +75,7 @@ static inline struct worker *current_wq_worker(void)* sched/ and workqueue.c. */ void wq_worker_running (struct task_struct *task); -void wq_worker_sleeping (struct task_struct *task); +void wq_worker_stopping (struct task_struct *task,bool voluntary);work_func_t wq_worker_last_func (struct task_struct *task);#endif /* _KERNEL_WORKQUEUE_INTERNAL_H */
Signature · 1 line
2.40.1
Tejun Heo
maintainerPATCH 2/6 workqueue: Re-order struct worker fields
In reply to Tejun Heostruct worker was laid out with the intent that all fields that are modified for each work item execution are in the first cacheline. However, this hasn't been true for a while with the addition of ->last_func. Let's just collect hot fields together at the top.
Move ->sleeping in the hole after ->current_color and move ->lst_func right below. While at it, drop the cacheline comment which isn't useful anymore.
--- kernel/workqueue_internal.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
kernel/workqueue_internal.h +5 -6
@@ -32,9 +32,12 @@ struct worker {work_func_t current_func;/* L: current_work's fn */ struct pool_workqueue *current_pwq;/* L: current_work's pwq */ unsigned int current_color;/* L: current_work's color */ -struct list_head scheduled;/* L: scheduled works */ +int sleeping;/* None */ + +/* used by the scheduler to determine a worker's last known identity */ +work_func_t last_func;/* L: last work's fn */ -/* 64 bytes boundary on 64bit, 32 on 32bit */ +struct list_head scheduled;/* L: scheduled works */ struct task_struct *task;/* I: worker task */ struct worker_pool *pool;/* A: the associated pool */
@@ -45,7 +48,6 @@ struct worker {unsigned long last_active;/* L: last active timestamp */ unsigned int flags;/* X: flags */ int id;/* I: worker id */ -int sleeping;/* None */ /* * Opaque string set with work_set_desc(). Printed out with task
@@ -55,9 +57,6 @@ struct worker {/* used only by rescuers to point to the target workqueue */ struct workqueue_struct *rescue_wq;/* I: the workqueue to rescue */ - -/* used by the scheduler to determine a worker's last known identity */ -work_func_t last_func; };/**
Signature · 1 line
2.40.1
Tejun Heo
maintainerPATCH 4/6 workqueue: Automatically mark CPU-hogging work items CPU_INTENSIVE
In reply to Tejun HeoIf a per-cpu work item hogs the CPU, it can prevent other work items from starting through concurrency management. A per-cpu workqueue which intends to host such CPU-hogging work items can choose to not participate in concurrency management by setting %WQ_CPU_INTENSIVE; however, this can be error-prone and difficult to debug when missed.
This patch adds an automatic CPU usage based detection. If a concurrency-managed work item consumes more CPU time than the threshold (5ms by default), it's marked CPU_INTENSIVE automatically on schedule-out.
The mechanism isn't foolproof in that the 5ms detection delays can add up if many CPU-hogging work items are queued at the same time. However, in such situations, the bigger problem likely is the CPU being saturated with per-cpu work items and the solution would be making them UNBOUND.
For occasional CPU hogging, the new automatic mechanism should provide reasonable protection with minimal increase in code complexity.
v2: Lai pointed out that wq_worker_stopping() also needs to be called from
preemption and rtlock paths and an earlier patch was updated accordingly. This patch adds a comment describing the risk of infinte recursions and how they're avoided.
--- kernel/workqueue.c | 82 +++++++++++++++++++++++++++---------- kernel/workqueue_internal.h | 1 + 2 files changed, 61 insertions(+), 22 deletions(-)
kernel/workqueue.c +60 -22
@@ -310,6 +310,14 @@ static struct kmem_cache *pwq_cache;static cpumask_var_t *wq_numa_possible_cpumask;/* possible CPUs of each node */ +/* +* Per-cpu work items which run for longer than the following threshold are +* automatically considered CPU intensive and excluded from concurrency +* management to prevent them from noticeably delaying other per-cpu work items. +*/ +static unsigned long wq_cpu_intensive_thresh_us =5000 ; +module_param_named (cpu_intensive_thresh_us, wq_cpu_intensive_thresh_us, ulong,0644 ); +static bool wq_disable_numa;module_param_named (disable_numa, wq_disable_numa, bool,0444 );
@@ -963,9 +971,6 @@ void notrace wq_worker_stopping(struct task_struct *task, bool voluntary)struct worker *worker =kthread_data (task);struct worker_pool *pool; -if (!voluntary ||task_is_running (task)) -return ; -/* * Rescuers, which may not have all the fields set up like normal * workers, also reach here, let's not access anything before
@@ -976,24 +981,54 @@ void notrace wq_worker_stopping(struct task_struct *task, bool voluntary) pool = worker->pool; -/* Return if preempted before wq_worker_running() was reached */ -if (worker->sleeping) -return ; +if (!voluntary ||task_is_running (task)) { +/* +* Concurrency-managed @worker is still RUNNING. See if the +* current work is hogging CPU stalling other per-cpu work +* items. If so, mark @worker CPU_INTENSIVE to exclude it from +* concurrency management. @worker->current_* are stable as they +* can only be modified by @task which is %current. +*/ +if (!worker->current_work || + task->se.sum_exec_runtime - worker->current_at < + wq_cpu_intensive_thresh_us *NSEC_PER_USEC ) +return ; - worker->sleeping =1 ; -raw_spin_lock_irq (&pool->lock); +/* +* As this function may be called from preempt_enable_notrace(), +* all operations upto this point must not be traceable to avoid +* infinite recursions. We're safe once IRQ is disabled. +*/ +raw_spin_lock_irq (&pool->lock); +worker_set_flags (worker,WORKER_CPU_INTENSIVE ); + }else { +/* +* Concurrency-managed @worker is sleeping. Decrement the +* associated pool's nr_running accordingly. +*/ -/* -* Recheck in case unbind_workers() preempted us. We don't -* want to decrement nr_running after the worker is unbound -* and nr_running has been reset. -*/ -if (worker->flags &WORKER_NOT_RUNNING ) { -raw_spin_unlock_irq (&pool->lock); -return ; +/* Return if preempted before wq_worker_running() was reached */ +if (worker->sleeping) +return ; + + worker->sleeping =1 ; +raw_spin_lock_irq (&pool->lock); + +/* +* Recheck in case unbind_workers() preempted us. We don't want +* to decrement nr_running after the worker is unbound and +* nr_running has been reset. As a running worker never sleeps +* inbetween work items, we know that @worker->current_* are +* valid after the following check. +*/ +if (worker->flags &WORKER_NOT_RUNNING ) { +raw_spin_unlock_irq (&pool->lock); +return ; + } + + pool->nr_running--; } - pool->nr_running--;if (need_more_worker (pool))wake_up_worker (pool);raw_spin_unlock_irq (&pool->lock);
@@ -2311,7 +2346,6 @@ __acquires(&pool->lock) {struct pool_workqueue *pwq =get_work_pwq (work);struct worker_pool *pool = worker->pool; -bool cpu_intensive = pwq->wq->flags &WQ_CPU_INTENSIVE ;unsigned long work_data;struct worker *collision;#ifdef CONFIG_LOCKDEP
@@ -2348,6 +2382,7 @@ __acquires(&pool->lock) worker->current_work = work; worker->current_func = work->func; worker->current_pwq = pwq; + worker->current_at = worker->task->se.sum_exec_runtime; work_data = *work_data_bits (work); worker->current_color =get_work_color (work_data);
@@ -2365,7 +2400,7 @@ __acquires(&pool->lock)* of concurrency management and the next code block will chain * execution of the pending work items. */ -if (unlikely (cpu_intensive)) +if (unlikely (pwq->wq->flags &WQ_CPU_INTENSIVE ))worker_set_flags (worker,WORKER_CPU_INTENSIVE );/*
@@ -2443,9 +2478,12 @@ __acquires(&pool->lock)raw_spin_lock_irq (&pool->lock); -/* clear cpu intensive status */ -if (unlikely (cpu_intensive)) -worker_clr_flags (worker,WORKER_CPU_INTENSIVE ); +/* +* In addition to %WQ_CPU_INTENSIVE, @worker may also have been marked +* CPU intensive by wq_worker_stopping() if @work consumed more than +* wq_cpu_intensive_thresh_us. Clear it. +*/ +worker_clr_flags (worker,WORKER_CPU_INTENSIVE );/* tag the worker for identification in schedule() */ worker->last_func = worker->current_func;
kernel/workqueue_internal.h +1 -0
@@ -31,6 +31,7 @@ struct worker {struct work_struct *current_work;/* L: work being processed */ work_func_t current_func;/* L: current_work's fn */ struct pool_workqueue *current_pwq;/* L: current_work's pwq */ +u64 current_at;/* L: runtime when current_work started */ unsigned int current_color;/* L: current_work's color */ int sleeping;/* None */
Signature · 1 line
2.40.1
Tejun Heo
maintainerPATCH 3/6 workqueue: Move worker_set/clr_flags() upwards
In reply to Tejun HeoThey're gonna be used wq_worker_stopping(). Move them upwards.
--- kernel/workqueue.c | 108 ++++++++++++++++++++++----------------------- 1 file changed, 54 insertions(+), 54 deletions(-)
kernel/workqueue.c +54 -54
@@ -863,6 +863,60 @@ static void wake_up_worker(struct worker_pool *pool)wake_up_process (worker->task); } +/** +* worker_set_flags - set worker flags and adjust nr_running accordingly +* @worker: self +* @flags: flags to set +* +* Set @flags in @worker->flags and adjust nr_running accordingly. +* +* CONTEXT: +* raw_spin_lock_irq(pool->lock) +*/ +static inline void worker_set_flags (struct worker *worker,unsigned int flags) +{ +struct worker_pool *pool = worker->pool; + +WARN_ON_ONCE (worker->task != current); + +/* If transitioning into NOT_RUNNING, adjust nr_running. */ +if ((flags &WORKER_NOT_RUNNING ) && + !(worker->flags &WORKER_NOT_RUNNING )) { + pool->nr_running--; + } + + worker->flags |= flags; +} + +/** +* worker_clr_flags - clear worker flags and adjust nr_running accordingly +* @worker: self +* @flags: flags to clear +* +* Clear @flags in @worker->flags and adjust nr_running accordingly. +* +* CONTEXT: +* raw_spin_lock_irq(pool->lock) +*/ +static inline void worker_clr_flags (struct worker *worker,unsigned int flags) +{ +struct worker_pool *pool = worker->pool; +unsigned int oflags = worker->flags; + +WARN_ON_ONCE (worker->task != current); + + worker->flags &= ~flags; + +/* +* If transitioning out of NOT_RUNNING, increment nr_running. Note +* that the nested NOT_RUNNING is not a noop. NOT_RUNNING is mask +* of multiple flags, not a single flag. +*/ +if ((flags &WORKER_NOT_RUNNING ) && (oflags &WORKER_NOT_RUNNING )) +if (!(worker->flags &WORKER_NOT_RUNNING )) + pool->nr_running++; +} +/** * wq_worker_running - a worker is running again * @task: task waking up
@@ -976,60 +1030,6 @@ work_func_t wq_worker_last_func(struct task_struct *task)return worker->last_func; } -/** -* worker_set_flags - set worker flags and adjust nr_running accordingly -* @worker: self -* @flags: flags to set -* -* Set @flags in @worker->flags and adjust nr_running accordingly. -* -* CONTEXT: -* raw_spin_lock_irq(pool->lock) -*/ -static inline void worker_set_flags (struct worker *worker,unsigned int flags) -{ -struct worker_pool *pool = worker->pool; - -WARN_ON_ONCE (worker->task != current); - -/* If transitioning into NOT_RUNNING, adjust nr_running. */ -if ((flags &WORKER_NOT_RUNNING ) && - !(worker->flags &WORKER_NOT_RUNNING )) { - pool->nr_running--; - } - - worker->flags |= flags; -} - -/** -* worker_clr_flags - clear worker flags and adjust nr_running accordingly -* @worker: self -* @flags: flags to clear -* -* Clear @flags in @worker->flags and adjust nr_running accordingly. -* -* CONTEXT: -* raw_spin_lock_irq(pool->lock) -*/ -static inline void worker_clr_flags (struct worker *worker,unsigned int flags) -{ -struct worker_pool *pool = worker->pool; -unsigned int oflags = worker->flags; - -WARN_ON_ONCE (worker->task != current); - - worker->flags &= ~flags; - -/* -* If transitioning out of NOT_RUNNING, increment nr_running. Note -* that the nested NOT_RUNNING is not a noop. NOT_RUNNING is mask -* of multiple flags, not a single flag. -*/ -if ((flags &WORKER_NOT_RUNNING ) && (oflags &WORKER_NOT_RUNNING )) -if (!(worker->flags &WORKER_NOT_RUNNING )) - pool->nr_running++; -} -/** * find_worker_executing_work - find worker which is executing a work * @pool: pool of interest
Signature · 1 line
2.40.1
Tejun Heo
maintainerPATCH 5/6 workqueue: Report work funcs that trigger automatic CPU_INTENSIVE mechanism
In reply to Tejun HeoWorkqueue now automatically marks per-cpu work items that hog CPU for too long as CPU_INTENSIVE, which excludes them from concurrency management and prevents stalling other concurrency-managed work items. If a work function keeps running over the thershold, it likely needs to be switched to use an unbound workqueue.
This patch adds a debug mechanism which tracks the work functions which trigger the automatic CPU_INTENSIVE mechanism and report them using pr_warn() with exponential backoff.
--- kernel/workqueue.c | 128 +++++++++++++++++++++++++++++++++++++++++++++ lib/Kconfig.debug | 13 +++++ 2 files changed, 141 insertions(+)
kernel/workqueue.c +128 -0
@@ -954,6 +954,132 @@ void wq_worker_running(struct task_struct *task) worker->sleeping =0 ; } +#ifdef CONFIG_WQ_CPU_INTENSIVE_REPORT + +/* +* Concurrency-managed per-cpu work items that hog CPU for longer than +* wq_cpu_intensive_thresh_us trigger the automatic CPU_INTENSIVE mechanism, +* which prevents them from stalling other concurrency-managed work items. If a +* work function keeps triggering this mechanism, it's likely that the work item +* should be using an unbound workqueue instead. +* +* wq_cpu_intensive_report() tracks work functions which trigger such conditions +* and report them so that they can be examined and converted to use unbound +* workqueues as appropriate. To avoid flooding the console, each violating work +* function is tracked and reported with exponential backoff. +*/ +#define WCI_MAX_ENTS 128 + +struct wci_ent { +work_func_t func; +atomic64_t cnt; +struct hlist_node hash_node; +struct list_head report_node; +}; + +static struct wci_ent wci_ents[WCI_MAX_ENTS ]; +static int wci_nr_ents; +static DEFINE_RAW_SPINLOCK (wci_lock); +static DEFINE_HASHTABLE(wci_hash, ilog2(WCI_MAX_ENTS)); +static LIST_HEAD (wci_report_list); +static struct kthread_worker *wci_report_worker; + +static void wci_report_workfn (struct kthread_work *work) +{ +struct wci_ent *ent, *n; + +raw_spin_lock_irq (&wci_lock); +list_for_each_entry_safe (ent, n, &wci_report_list, report_node) { +pr_warn ("workqueue: %ps hogged CPU for >%luus %llu times, consider switching to WQ_UNBOUND\n" , + ent->func, wq_cpu_intensive_thresh_us, +atomic64_read (&ent->cnt)); +list_del_init (&ent->report_node); + } +raw_spin_unlock_irq (&wci_lock); +} + +static DEFINE_KTHREAD_WORK(wci_report_work, wci_report_workfn); + +static struct wci_ent *wci_find_ent (work_func_t func) +{ +struct wci_ent *ent; + +hash_for_each_possible_rcu (wci_hash, ent, hash_node, + (unsigned long )func) { +if (ent->func == func) +return ent; + } +return NULL ; +} + +static void wq_cpu_intensive_report (work_func_t func) +{ +struct wci_ent *ent; + +restart: + ent =wci_find_ent (func); +if (ent) { +u64 cnt; + +/* +* Start reporting from the fourth time and back off +* exponentially. +*/ + cnt =atomic64_inc_return_relaxed (&ent->cnt); +if (cnt <4 || !is_power_of_2 (cnt)) +return ; + +raw_spin_lock (&wci_lock); +if (list_empty (&ent->report_node)) { +list_add_tail (&ent->report_node, &wci_report_list); +if (wci_report_worker) +kthread_queue_work (wci_report_worker, + &wci_report_work); + } +raw_spin_unlock (&wci_lock); +return ; + } + +/* +* @func is a new violation. Allocate a new entry for it. If wcn_ents[] +* is exhausted, something went really wrong and we probably made enough +* noise already. +*/ +if (wci_nr_ents >=WCI_MAX_ENTS ) +return ; + +raw_spin_lock (&wci_lock); + +if (wci_nr_ents >=WCI_MAX_ENTS ) { +raw_spin_unlock (&wci_lock); +return ; + } + +if (wci_find_ent (func)) { +raw_spin_unlock (&wci_lock); + goto restart; + } + + ent = &wci_ents[wci_nr_ents++]; + ent->func = func; +atomic64_set (&ent->cnt,1 ); +INIT_LIST_HEAD (&ent->report_node); +hash_add_rcu (wci_hash, &ent->hash_node, (unsigned long )func); + +raw_spin_unlock (&wci_lock); +} + +static void __init wq_cpu_intensive_report_init (void ) +{ + wci_report_worker =kthread_create_worker (0 ,"wq_cpu_intensive_report" ); +WARN_ON (!wci_report_worker); +} + +#else /* CONFIG_WQ_CPU_INTENSIVE_REPORT */ +static void wq_cpu_intensive_report (work_func_t func) {} +static void __init wq_cpu_intensive_report_init (void ) {} +#endif /* CONFIG_WQ_CPU_INTENSIVE_REPORT */ +/** * wq_worker_stopping - a worker is stopping * @task: task stopping
@@ -1001,6 +1127,7 @@ void notrace wq_worker_stopping(struct task_struct *task, bool voluntary)*/ raw_spin_lock_irq (&pool->lock);worker_set_flags (worker,WORKER_CPU_INTENSIVE ); +wq_cpu_intensive_report (worker->current_func); }else {/* * Concurrency-managed @worker is sleeping. Decrement the
@@ -6421,6 +6548,7 @@ void __init workqueue_init(void) wq_online = true;wq_watchdog_init (); +wq_cpu_intensive_report_init (); }/*
lib/Kconfig.debug +13 -0
@@ -1134,6 +1134,19 @@ config WQ_WATCHDOG state. This can be configured through kernel parameter "workqueue.watchdog_thresh" and its sysfs counterpart. +config WQ_CPU_INTENSIVE_REPORT + bool "Report per-cpu work items which are CPU intensive" + depends on DEBUG_KERNEL + help + Say Y here to enable reporting of concurrency-managed per-cpu work + items that hog CPUs for longer than + workqueue.cpu_intensive_threshold_us. Workqueue automatically + detects and excludes them from concurrency management to prevent + them from stalling other per-cpu work items. Occassional + triggering may not necessarily indicate a problem. Repeated + triggering likely indicates that the work item should be switched + to use an unbound workqueue. + config TEST_LOCKUP tristate "Test module to generate lockups" depends on m
Signature · 1 line
2.40.1
Tejun Heo
maintainerPATCH 6/6 workqueue: Add pwq->stats[] and a monitoring script
In reply to Tejun HeoCurrently, the only way to peer into workqueue operations is through tracing. While possible, it isn't easy or convenient to monitor per-workqueue behaviors over time this way. Let's add pwq->stats[] that track relevant events and a drgn monitoring script - tools/workqueue/wq_monitor.py.
It's arguable whether this needs to be configurable. However, it currently only has seven counters and the runtime overhead shouldn't be noticeable given that they're on pwq's which are per-cpu on per-cpu workqueues and per-numa-node on unbound ones. Let's keep it simple for the time being.
--- Documentation/core-api/workqueue.rst | 30 ++++++ kernel/workqueue.c | 29 +++++- tools/workqueue/wq_monitor.py | 148 +++++++++++++++++++++++++++ 3 files changed, 206 insertions(+), 1 deletion(-) create mode 100644 tools/workqueue/wq_monitor.py
Documentation/core-api/workqueue.rst +30 -0
@@ -348,6 +348,35 @@ Guidelines level of locality in wq operations and work item execution. +Monitoring +========== + +Use tools/workqueue/wq_monitor.py to monitor workqueue operations: :: + + $ tools/workqueue/wq_monitor.py events + total infl CPUtime CPUhog CMwake mayday rescued + events 18545 0 6.1 0 5 - - + events_highpri 8 0 0.0 0 0 - - + events_long 3 0 0.0 0 0 - - + events_unbound 38306 0 0.1 - - - - + events_freezable 0 0 0.0 0 0 - - + events_power_efficient 29598 0 0.2 0 0 - - + events_freezable_power_ 10 0 0.0 0 0 - - + sock_diag_events 0 0 0.0 0 0 - - + + total infl CPUtime CPUhog CMwake mayday rescued + events 18548 0 6.1 0 5 - - + events_highpri 8 0 0.0 0 0 - - + events_long 3 0 0.0 0 0 - - + events_unbound 38322 0 0.1 - - - - + events_freezable 0 0 0.0 0 0 - - + events_power_efficient 29603 0 0.2 0 0 - - + events_freezable_power_ 10 0 0.0 0 0 - - + sock_diag_events 0 0 0.0 0 0 - - + + ... + + Debugging =========
@@ -387,6 +416,7 @@ For the second type of problems it should be possible to just check The work item's function should be trivially visible in the stack trace. + Non-reentrance Conditions =========================
kernel/workqueue.c +28 -1
@@ -199,6 +199,22 @@ struct worker_pool {struct rcu_head rcu; }; +/* +* Per-pool_workqueue statistics. These can be monitored using +* tools/workqueue/wq_monitor.py. +*/ +enum pool_workqueue_stats { +PWQ_STAT_STARTED ,/* work items started execution */ +PWQ_STAT_COMPLETED ,/* work items completed execution */ +PWQ_STAT_CPU_TIME ,/* total CPU time consumed */ +PWQ_STAT_CPU_INTENSIVE ,/* wq_cpu_intensive_thresh_us expirations */ +PWQ_STAT_CM_WAKEUP ,/* concurrency-management worker wakeups */ +PWQ_STAT_MAYDAY ,/* maydays to rescuer */ +PWQ_STAT_RESCUED ,/* linked work items executed by rescuer */ + +PWQ_NR_STATS , +}; +/* * The per-pool workqueue. While queued, the lower WORK_STRUCT_FLAG_BITS * of work_struct->data are used for flags and the remaining high bits
@@ -236,6 +252,8 @@ struct pool_workqueue {struct list_head pwqs_node;/* WR: node on wq->pwqs */ struct list_head mayday_node;/* MD: node on wq->maydays */ +u64 stats[PWQ_NR_STATS ]; +/* * Release of unbound pwq is punted to system_wq. See put_pwq() * and pwq_unbound_release_workfn() for details. pool_workqueue
@@ -1127,6 +1145,7 @@ void notrace wq_worker_stopping(struct task_struct *task, bool voluntary)*/ raw_spin_lock_irq (&pool->lock);worker_set_flags (worker,WORKER_CPU_INTENSIVE ); + worker->current_pwq->stats[PWQ_STAT_CPU_INTENSIVE ]++;wq_cpu_intensive_report (worker->current_func); }else {/*
@@ -1156,8 +1175,10 @@ void notrace wq_worker_stopping(struct task_struct *task, bool voluntary) pool->nr_running--; } -if (need_more_worker (pool)) +if (need_more_worker (pool)) { + worker->current_pwq->stats[PWQ_STAT_CM_WAKEUP ]++;wake_up_worker (pool); + }raw_spin_unlock_irq (&pool->lock); }
@@ -2336,6 +2357,7 @@ static void send_mayday(struct work_struct *work)get_pwq (pwq);list_add_tail (&pwq->mayday_node, &wq->maydays);wake_up_process (wq->rescuer->task); + pwq->stats[PWQ_STAT_MAYDAY ]++; } }
@@ -2574,6 +2596,7 @@ __acquires(&pool->lock)* workqueues), so hiding them isn't a problem. */ lockdep_invariant_state (true); + pwq->stats[PWQ_STAT_STARTED ]++;trace_workqueue_execute_start (work); worker->current_func (work);/*
@@ -2581,6 +2604,9 @@ __acquires(&pool->lock)* point will only record its address. */ trace_workqueue_execute_end (work, worker->current_func); + pwq->stats[PWQ_STAT_COMPLETED ]++; + pwq->stats[PWQ_STAT_CPU_TIME ] += + worker->task->se.sum_exec_runtime - worker->current_at;lock_map_release (&lockdep_map);lock_map_release (&pwq->wq->lockdep_map);
@@ -2827,6 +2853,7 @@ static int rescuer_thread(void *__rescuer)if (first) pool->watchdog_ts = jiffies;move_linked_works (work, scheduled, &n); + pwq->stats[PWQ_STAT_RESCUED ]++; } first = false; }
tools/workqueue/wq_monitor.py new file +148 -0
148 lines not on this page · raw message
Signature · 1 line
2.40.1
Re: [PATCH 3/6] workqueue: Move worker_set/clr_flags() upwards
In reply to Tejun HeoQuoted 2 lines · Tejun Heo
They're gonna be used
wq_worker_stopping(). Move them upwards.
I got points deducted in fifth grade for using "gonna" instead of "going to". Here I am, 40+ years later, and I still feel it.
Please use "going to". And add the missing "in" while at it.
Linus "scarred for life" Torvalds
Peter Zijlstra
maintainerRe: [PATCH 4/6] workqueue: Automatically mark CPU-hogging work items CPU_INTENSIVE
In reply to Tejun HeoQuoted 22 lines · Tejun Heo
(quoted diff) +12
-3@@ -976,24 +981,54 @@ void notrace wq_worker_stopping(struct task_struct *task, bool voluntary) pool = worker->pool; - /* Return if preempted before wq_worker_running() was reached */ - if (worker->sleeping) - return; + if (!voluntary || task_is_running(task)) { + /* + * Concurrency-managed @worker is still RUNNING. See if the + * current work is hogging CPU stalling other per-cpu work + * items. If so, mark @worker CPU_INTENSIVE to exclude it from + * concurrency management. @worker->current_* are stable as they + * can only be modified by @task which is %current. + */ + if (!worker->current_work || + task->se.sum_exec_runtime - worker->current_at < + wq_cpu_intensive_thresh_us * NSEC_PER_USEC) + return;
Review __acquires(&pool->lock) · line 2385
Quoted 4 lines
(quoted diff) +1
-0@@ -2348,6 +2382,7 @@ __acquires(&pool->lock) worker->current_work = work; worker->current_func = work->func; worker->current_pwq = pwq; + worker->current_at = worker->task->se.sum_exec_runtime;
That only gets updated at scheduling events, it's not a 'running' clock.
Review __acquires(&pool->lock) · line 2388
Quoted 3 lines
(quoted diff) +0
-0work_data = *work_data_bits(work); worker->current_color = get_work_color(work_data);
Anyway, it occurs to me that if all you want is to measure long running works, then would it not be much easier to simply forward the tick?
Something like the below.. Then this tick handler (which will have just updated ->sum_exec_runtime BTW) can do that above 'work-be-long-running' check.
Or am I missing something? Seems simpler than hijacking preempt-out.
kernel/sched/core.c +3 -0
@@ -5632,6 +5632,9 @@ void scheduler_tick(void)perf_event_task_tick (); +if (curr->flags &PF_WQ_WORKER ) +wq_worker_tick (curr); +#ifdef CONFIG_SMP rq->idle_balance =idle_cpu (cpu);trigger_load_balance (rq);
Tejun Heo
maintainerRe: [PATCH 4/6] workqueue: Automatically mark CPU-hogging work items CPU_INTENSIVE
Hello, Peter.
Quoted 7 lines · Peter Zijlstra
Review __acquires(&pool->lock) · line 2385
Quoted 5 lines
(quoted diff) +1
-0@@ -2348,6 +2382,7 @@ __acquires(&pool->lock) worker->current_work = work; worker->current_func = work->func; worker->current_pwq = pwq; + worker->current_at = worker->task->se.sum_exec_runtime;That only gets updated at scheduling events, it's not a 'running' clock.
I think it gets updated on each tick and preemption checks, right? That should be more than enough here. Just using jiffies should be fine on higher HZ machines; however, when the threshold is not significantly longer than HZ, it becomes a bit problematic. Reading highres clock separately is an option but is a little bit more expensive. So, sum_exec_runtime seems to fit pretty well. FWIW, it's already used outside scheduler proper too.
Quoted 6 lines
Review __acquires(&pool->lock) · line 2388
Quoted 3 lines
(quoted diff) +0
-0work_data = *work_data_bits(work); worker->current_color = get_work_color(work_data);Anyway, it occurs to me that if all you want is to measure long running works, then would it not be much easier to simply forward the tick?
Ah, that reminds me that I forgot to update the origin timestamp on sleeping. It should be tracking the continuous CPU consumption between sleeps.
Quoted 5 lines
Something like the below.. Then this tick handler (which will have just updated ->sum_exec_runtime BTW) can do that above 'work-be-long-running' check.
Or am I missing something? Seems simpler than hijacking preempt-out.
One advantage of doing it from preempt-out is that workqueue can immediately release other per-cpu work items without any delay as when the violating work item leaves CPU is the exact point for both detection and action.
That said, this mechanism doesn't have to super accurate, so simpler code has its benefits. I'll take a stab at it.
Thanks.
Signature · 1 line
tejun
Tejun Heo
maintainerRe: [PATCH 3/6] workqueue: Move worker_set/clr_flags() upwards
In reply to Linus TorvaldsQuoted 10 lines · Linus Torvalds
Quoted 2 lines · Tejun Heo
They're gonna be used
wq_worker_stopping(). Move them upwards.I got points deducted in fifth grade for using "gonna" instead of "going to". Here I am, 40+ years later, and I still feel it.
Please use "going to". And add the missing "in" while at it.
Linus "scarred for life" Torvalds
Aye, Aye, imma update.
Thanks.
Signature · 1 line
tejun